configs/pandaboard_defconfig: drop defconfig
The defconfig has failed to build since May with the change to GCC 13.x,
E.G.:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597768
I no longer have access to a pandaboard. Pandaboard/omap4 support has
recently been dropped from u-boot:
https://lists.denx.de/pipermail/u-boot/2024-July/558846.html
And (part of) the kernel support is also getting removed:
https://patchwork.kernel.org/project/linux-media/patch/815a789d-85a5-44a1-8b9c-429ac0101e3f@xs4all.nl/
So drop the defconfig here as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
diff --git a/.checkpackageignore b/.checkpackageignore
index 4cfc202..96358d0 100644
--- a/.checkpackageignore
+++ b/.checkpackageignore
@@ -221,7 +221,6 @@
configs/orangepi_zero_defconfig lib_defconfig.ForceCheckHash
configs/orangepi_zero_plus2_defconfig lib_defconfig.ForceCheckHash
configs/orangepi_zero_plus_defconfig lib_defconfig.ForceCheckHash
-configs/pandaboard_defconfig lib_defconfig.ForceCheckHash
configs/pc_x86_64_bios_defconfig lib_defconfig.ForceCheckHash
configs/pc_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
configs/pcengines_apu2_defconfig lib_defconfig.ForceCheckHash
diff --git a/DEVELOPERS b/DEVELOPERS
index 0b590f0..59f3b03 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2553,7 +2553,6 @@
F: board/nexbox/a95x/
F: board/openblocks/a6/
F: board/orangepi/
-F: board/pandaboard/
F: board/roseapplepi/
F: board/visionfive/
F: boot/shim/
@@ -2566,7 +2565,6 @@
F: configs/openblocks_a6_defconfig
F: configs/orangepi_pc_defconfig
F: configs/orangepi_r1_defconfig
-F: configs/pandaboard_defconfig
F: configs/roseapplepi_defconfig
F: configs/sheevaplug_defconfig
F: configs/visionfive_defconfig
diff --git a/board/pandaboard/genimage.cfg b/board/pandaboard/genimage.cfg
deleted file mode 100644
index dfe3882..0000000
--- a/board/pandaboard/genimage.cfg
+++ /dev/null
@@ -1,27 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "MLO",
- "u-boot.img"
- }
- }
-
- size = 8M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- size = 512M
- }
-}
diff --git a/board/pandaboard/readme.txt b/board/pandaboard/readme.txt
deleted file mode 100644
index 80a20c2..0000000
--- a/board/pandaboard/readme.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Pandaboard
-==========
-
-This file documents the Buildroot support for the Pandaboard, a
-low-power, low-cost single-board computer development platform based
-on the Texas Instruments OMAP4 system on a chip (SoC).
-
-Configuring and building Buildroot
-----------------------------------
-
-Start from the defconfig:
-
- $ make pandaboard_defconfig
-
-You can edit build options the usual way:
-
- $ make menuconfig
-
-When you are happy with the setup, run:
-
- $ make
-
-The result of the build with the default settings should be these files:
-
- output/images
- +-- MLO
- +-- omap4-panda-a4.dtb
- +-- omap4-panda.dtb
- +-- omap4-panda-es.dtb
- +-- rootfs.ext4
- +-- sdcard.img
- +-- u-boot.img
- +-- zImage
-
-How to write the SD card
-------------------------
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX
-instead depending on setup).
diff --git a/configs/pandaboard_defconfig b/configs/pandaboard_defconfig
deleted file mode 100644
index 376ecfe..0000000
--- a/configs/pandaboard_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_ENABLE_VFP=y
-BR2_ARM_FPU_VFPV3=y
-
-# Linux headers same as kernel, a 5.12 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y
-
-# System
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
-BR2_SYSTEM_DHCP="eth0"
-
-# Image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pandaboard/genimage.cfg"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.2"
-BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="omap4-panda-es omap4-panda omap4-panda-a4"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="omap4_panda"
-BR2_TARGET_UBOOT_FORMAT_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="MLO"
-
-# Required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
