| #AP6210_NVRAM_V1.2_03192013 |
| manfid=0x2d0 |
| prodid=0x492 |
| vendid=0x14e4 |
| devid=0x4343 |
| boardtype=0x0598 |
| |
| # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same |
| #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305 |
| boardrev=0x1307 |
| boardnum=777 |
| xtalfreq=26000 |
| boardflags=0x80201 |
| boardflags2=0x80 |
| sromrev=3 |
| wl0id=0x431b |
| macaddr=00:90:4c:07:71:12 |
| aa2g=1 |
| ag0=2 |
| maxp2ga0=74 |
| cck2gpo=0x2222 |
| ofdm2gpo=0x44444444 |
| mcs2gpo0=0x6666 |
| mcs2gpo1=0x6666 |
| pa0maxpwr=56 |
| |
| #P207 PA params |
| #pa0b0=5447 |
| #pa0b1=-658 |
| #pa0b2=-175 |
| |
| #Same PA params for P304,P305, P306, P307 |
| |
| pa0b0=5447 |
| pa0b1=-607 |
| pa0b2=-160 |
| pa0itssit=62 |
| pa1itssit=62 |
| |
| |
| cckPwrOffset=5 |
| ccode=0 |
| rssismf2g=0xa |
| rssismc2g=0x3 |
| rssisav2g=0x7 |
| triso2g=0 |
| noise_cal_enable_2g=0 |
| noise_cal_po_2g=0 |
| swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff |
| temp_add=29767 |
| temp_mult=425 |
| |
| btc_flags=0x6 |
| btc_params0=5000 |
| btc_params1=1000 |
| btc_params6=63 |
