| ################################################################################ |
| # |
| # edk2 |
| # |
| ################################################################################ |
| |
| EDK2_VERSION = edk2-stable202308 |
| EDK2_SITE = https://github.com/tianocore/edk2 |
| EDK2_SITE_METHOD = git |
| EDK2_LICENSE = BSD-2-Clause-Patent |
| EDK2_LICENSE_FILES = License.txt |
| EDK2_CPE_ID_VENDOR = tianocore |
| EDK2_DEPENDENCIES = edk2-platforms host-python3 host-acpica host-util-linux |
| EDK2_INSTALL_TARGET = NO |
| EDK2_INSTALL_IMAGES = YES |
| |
| ifeq ($(BR2_ENABLE_DEBUG),y) |
| EDK2_BUILD_TYPE = DEBUG |
| ifeq ($(BR2_TARGET_EDK2_OVMF_DEBUG_ON_SERIAL),y) |
| # DEBUG_ON_SERIAL_PORT is only tested to be set, so don't disable it, as |
| # it would still be set. |
| EDK2_BUILD_OPTS += -DDEBUG_ON_SERIAL_PORT |
| endif |
| else |
| EDK2_BUILD_TYPE = RELEASE |
| # DEBUG_ON_SERIAL_PORT is only valid in debug builds, so useless to set |
| # it (enabled or disabled) on a relase build. |
| endif |
| |
| # Build system notes. |
| # |
| # The EDK2 build system is rather unique, so here are a few useful notes. |
| # |
| # First, builds rely heavily on Git submodules to fetch various dependencies |
| # into specific directory structures. It might be possible to work around this |
| # and rely on Buildroot's infrastructure, but using Git submodules greatly |
| # simplifies this already complicated build system. |
| # |
| # Second, the build system is spread across various commands and stages. |
| # Therefore, all build variables needs to be exported to be available |
| # accordingly. The first stage will build $(@D)/BaseTools which contains |
| # various tools and scripts for the host. |
| # |
| # Third, where applicable, the dependency direction between EDK2 and |
| # ARM Trusted Firmware (ATF) will go in different direction for different |
| # platforms. Most commonly, ATF will depend on EDK2 via the BL33 payload. |
| # But for some platforms (e.g. QEMU SBSA or DeveloperBox) EDK2 will package |
| # the ATF images within its own build system. In such cases, intermediary |
| # "EDK2 packages" will be built in $(EDK2_BUILD_PACKAGES) in order for EDK2 |
| # to be able to use them in subsequent build stages. |
| # |
| # For more information about the build setup: |
| # https://edk2-docs.gitbook.io/edk-ii-build-specification/4_edk_ii_build_process_overview |
| |
| EDK2_GIT_SUBMODULES = YES |
| EDK2_BUILD_PACKAGES = $(@D)/Build/Buildroot |
| EDK2_PACKAGES_PATHS = $(@D) $(EDK2_BUILD_PACKAGES) $(STAGING_DIR)/usr/share/edk2-platforms |
| |
| ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_I386),y) |
| EDK2_ARCH = IA32 |
| EDK2_DEPENDENCIES += host-nasm |
| EDK2_PACKAGE_NAME = OvmfPkg |
| EDK2_PLATFORM_NAME = OvmfPkgIa32 |
| EDK2_BUILD_DIR = OvmfIa32 |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_X64),y) |
| EDK2_ARCH = X64 |
| EDK2_DEPENDENCIES += host-nasm |
| EDK2_PACKAGE_NAME = OvmfPkg |
| EDK2_PLATFORM_NAME = OvmfPkgX64 |
| EDK2_BUILD_DIR = OvmfX64 |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_PACKAGE_NAME = ArmVirtPkg |
| EDK2_PLATFORM_NAME = ArmVirtQemu |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH) |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_PACKAGE_NAME = ArmVirtPkg |
| EDK2_PLATFORM_NAME = ArmVirtQemuKernel |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH) |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_SGI575),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_PACKAGE_NAME = Platform/ARM/SgiPkg/Sgi575 |
| EDK2_PLATFORM_NAME = Sgi575 |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME) |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_PACKAGE_NAME = Platform/ARM/VExpressPkg |
| EDK2_PLATFORM_NAME = ArmVExpress-FVP-AArch64 |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME) |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_SOCIONEXT_DEVELOPERBOX),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_DEPENDENCIES += host-dtc arm-trusted-firmware |
| EDK2_PACKAGE_NAME = Platform/Socionext/DeveloperBox |
| EDK2_PLATFORM_NAME = DeveloperBox |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME) |
| EDK2_BUILD_ENV += DTC_PREFIX=$(HOST_DIR)/bin/ |
| EDK2_BUILD_OPTS += -D DO_X86EMU=TRUE |
| EDK2_PRE_BUILD_HOOKS += EDK2_PRE_BUILD_SOCIONEXT_DEVELOPERBOX |
| |
| define EDK2_PRE_BUILD_SOCIONEXT_DEVELOPERBOX |
| mkdir -p $(EDK2_BUILD_PACKAGES)/Platform/Socionext/DeveloperBox |
| $(ARM_TRUSTED_FIRMWARE_DIR)/tools/fiptool/fiptool create \ |
| --tb-fw $(BINARIES_DIR)/bl31.bin \ |
| --soc-fw $(BINARIES_DIR)/bl31.bin \ |
| --scp-fw $(BINARIES_DIR)/bl31.bin \ |
| $(EDK2_BUILD_PACKAGES)/Platform/Socionext/DeveloperBox/fip_all_arm_tf.bin |
| endef |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_DEPENDENCIES += host-dtc arm-trusted-firmware edk2-non-osi |
| EDK2_PACKAGE_NAME = Platform/SolidRun/Armada80x0McBin |
| EDK2_PLATFORM_NAME = Armada80x0McBin |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH) |
| EDK2_BUILD_ENV += DTC_PREFIX=$(HOST_DIR)/bin/ |
| EDK2_BUILD_OPTS += -D INCLUDE_TFTP_COMMAND |
| EDK2_PACKAGES_PATHS += $(STAGING_DIR)/usr/share/edk2-non-osi |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA),y) |
| EDK2_ARCH = AARCH64 |
| EDK2_DEPENDENCIES += arm-trusted-firmware |
| EDK2_PACKAGE_NAME = Platform/Qemu/SbsaQemu |
| EDK2_PLATFORM_NAME = SbsaQemu |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME) |
| EDK2_PRE_BUILD_HOOKS += EDK2_PRE_BUILD_QEMU_SBSA |
| |
| define EDK2_PRE_BUILD_QEMU_SBSA |
| mkdir -p $(EDK2_BUILD_PACKAGES)/Platform/Qemu/Sbsa |
| ln -srf $(BINARIES_DIR)/{bl1.bin,fip.bin} $(EDK2_BUILD_PACKAGES)/Platform/Qemu/Sbsa/ |
| endef |
| |
| else ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_RISCV),y) |
| EDK2_ARCH = RISCV64 |
| EDK2_PACKAGE_NAME = OvmfPkg/RiscVVirt |
| EDK2_PLATFORM_NAME = RiscVVirtQemu |
| EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME) |
| |
| endif |
| |
| EDK2_BASETOOLS_OPTS = \ |
| EXTRA_LDFLAGS="$(HOST_LDFLAGS)" \ |
| EXTRA_OPTFLAGS="$(HOST_CPPFLAGS)" |
| |
| EDK2_PACKAGES_PATH = $(subst $(space),:,$(strip $(EDK2_PACKAGES_PATHS))) |
| |
| # EDK2 "build" script internally uses and calls "make", which controls |
| # its own flags. It is mainly tested while not being a sub-make. In |
| # order to stay in that configuration, we avoid leaking top-level |
| # Buildroot make flags into EDK2 build by clearing the MAKEFLAGS |
| # environment variable. |
| EDK2_BUILD_ENV += \ |
| MAKEFLAGS= \ |
| WORKSPACE=$(@D) \ |
| PACKAGES_PATH=$(EDK2_PACKAGES_PATH) \ |
| PYTHON_COMMAND=$(HOST_DIR)/bin/python3 \ |
| IASL_PREFIX=$(HOST_DIR)/bin/ \ |
| NASM_PREFIX=$(HOST_DIR)/bin/ \ |
| GCC5_$(EDK2_ARCH)_PREFIX=$(TARGET_CROSS) |
| |
| EDK2_BUILD_OPTS += \ |
| -t GCC5 \ |
| -n $(BR2_JLEVEL) \ |
| -a $(EDK2_ARCH) \ |
| -b $(EDK2_BUILD_TYPE) \ |
| -p $(EDK2_PACKAGE_NAME)/$(EDK2_PLATFORM_NAME).dsc |
| |
| define EDK2_BUILD_CMDS |
| mkdir -p $(EDK2_BUILD_PACKAGES) |
| export $(EDK2_BUILD_ENV) && \ |
| unset ARCH && \ |
| source $(@D)/edksetup.sh && \ |
| $(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/BaseTools $(EDK2_BASETOOLS_OPTS) && \ |
| build $(EDK2_BUILD_OPTS) all |
| endef |
| |
| define EDK2_INSTALL_IMAGES_CMDS |
| cp -f $(@D)/Build/$(EDK2_BUILD_DIR)/$(EDK2_BUILD_TYPE)_GCC5/FV/*.fd $(BINARIES_DIR) |
| endef |
| |
| $(eval $(generic-package)) |
