| Starfive VisionFive |
| =================== |
| |
| The VisionFive is a low-cost RISC-V 64-bit based platform, powered by a |
| Starfive JH7100 processor. |
| |
| https://doc-en.rvspace.org/Doc_Center/visionfive.html |
| |
| How to build |
| ============ |
| |
| $ make visionfive_defconfig |
| $ make |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Preparing the board |
| =================== |
| |
| Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). |
| |
| Insert your SD card. |
| |
| Power-up the board using an USB-C cable. |
