#
# Config.in.legacy - support for backward compatibility
#
# When an existing Config.in symbol is removed, it should be added again in this
# file, and take appropriate action to approximate backward compatibility. If
# there is an equivalent (set of) new symbols, these can just be select'ed by
# the old symbol. This makes sure that running 'make oldconfig' will make things
# "just work" when upgrading to a new buildroot version. If the change is too
# fundamental and cannot be fixed by a simple select, then the old symbol should
# select BR2_LEGACY.  If that symbol is set, the build will issue an error.
#
# When adding legacy symbols to this file, add them to the front. The oldest
# symbols will be removed again after about two years.
#
# The symbol should be copied as-is from the place where it was previously
# defined, but the help text should be removed or replaced with something that
# explains how to fix it.

config BR2_LEGACY
	bool
	help
	  This option is selected automatically when your old .config uses an
	  option that no longer exists in current buildroot. In that case, the
	  build will fail. Look for config options which are selected in the
	  menu below: they no longer exist and should be replaced by something
	  else.

# This comment fits exactly in a 80-column display
comment "Legacy detected: check the content of the menu below"
	depends on BR2_LEGACY

menu "Legacy config options"

if BR2_LEGACY
comment "Your old configuration uses legacy options that no  "
comment "longer exist in buildroot.                          "
comment "Please look at the options which have been selected "
comment "and read their help text.                           "
comment "As long as these options stay selected, the build   "
comment "will fail.                                          "
comment "Note: at some point in the future, the oldest legacy"
comment "options will be removed, and configuration files    "
comment "that still have those options set, will fail to     "
comment "build, or run, in unpredictable ways.               "
endif

###############################################################################
comment "Legacy options removed in 2013.08"

config BR2_ARM_OABI
	bool "ARM OABI support has been removed"
	select BR2_LEGACY
	help
	  The support for the ARM OABI was deprecated since a while,
	  and has been removed completely from Buildroot. It is also
	  deprecated in upstream gcc, since gcc 4.7. People should
	  switch to EABI instead, which should not be a problem as
	  long as you don't have pre-built OABI binaries in your
	  system that you can't recompile.

config BR2_PACKAGE_DOSFSTOOLS_DOSFSCK
	bool "dosfstools dosfsck renamed to fsck.fat"
	select BR2_LEGACY
	select BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT
	help
	  dosfsck was renamed upstream to fsck.fat for consistency.

config BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL
	bool "dosfstools dosfslabel renamed to fatlabel"
	select BR2_LEGACY
	select BR2_PACKAGE_DOSFSTOOLS_FATLABEL
	help
	  doslabel was renamed upstream to fatlabel for consistency.

config BR2_PACKAGE_DOSFSTOOLS_MKDOSFS
	bool "dosfstools mkdosfs renamed to mkfs.fat"
	select BR2_LEGACY
	select BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT
	help
	  mkdosfs was renamed upstream to mkfs.fat for consistency.

config BR2_ELF2FLT
	bool "the elf2flt option has been renamed"
	select BR2_LEGACY
	help
	  The BR2_ELF2FLT option has been renamed to
	  BR2_PACKAGE_HOST_ELF2FLT due to the conversion of elf2flt to
	  the package infrastructure.

config BR2_VFP_FLOAT
	bool "the ARM VFP floating point option has been renamed"
	select BR2_LEGACY
	help
	  Due to a major refactoring of the floating-point handling of
	  the ARM architecture support, the BR2_VFP_FLOAT option has
	  been replaced with a choice of options that allows to select
	  between various VFP versions/capabilities.

###############################################################################
comment "Legacy options removed in 2013.05"

config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8192
	bool "Realtek 8192 replaced by Realtek 81xx"
	select BR2_LEGACY
	select BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX
	help
	  Now covers the whole Realtek 81xx familly: 8188/8192.

config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8712
	bool "Realtek 8712 replaced by Realtek 87xx"
	select BR2_LEGACY
	select BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX
	help
	  Now covers the whole Realtek 87xx familly: 8712/8723.

###############################################################################
comment "Legacy options removed in 2013.02"

config BR2_sa110
	bool "sa110 ARM target switched to strongarm"
	select BR2_LEGACY
	select BR2_strongarm
	help
	  The SA110 is the same as a generic StrongARM, it just differs
	  in speed, peripherals and cache.

config BR2_sa1100
	bool "sa1100 ARM target switched to strongarm"
	select BR2_LEGACY
	select BR2_strongarm
	help
	  The SA1100 is the same as a generic StrongARM, it just differs
	  in speed, peripherals and cache.

config BR2_PACKAGE_GDISK
	bool "gdisk has been replaced by gptfdisk"
	select BR2_LEGACY
	select BR2_PACKAGE_GPTFDISK
	help
	  The option has been renamed BR2_PACKAGE_GPTFDISK.

config BR2_PACKAGE_GDISK_GDISK
	bool "gdisk tool from gdisk has been replaced by gdisk in gptfdisk"
	select BR2_LEGACY
	select BR2_PACKAGE_GPTFDISK
	select BR2_PACKAGE_GPTFDISK_GDISK
	help
	  The option has been renamed BR2_PACKAGE_GPTFDISK_GDISK.

config BR2_PACKAGE_GDISK_SGDISK
	bool "sgdisk tool from gdisk has been replaced by sgdisk in gptfdisk"
	select BR2_LEGACY
	select BR2_PACKAGE_GPTFDISK
	select BR2_PACKAGE_GPTFDISK_SGDISK
	help
	  The option has been renamed BR2_PACKAGE_GPTFDISK_SGDISK.

config BR2_PACKAGE_GDB_HOST
	bool "gdb for the host option has been renamed"
	select BR2_PACKAGE_HOST_GDB
	select BR2_LEGACY
	help
	  Due to the conversion of gdb to the package infrastructure,
	  the BR2_PACKAGE_GDB_HOST option has been renamed
	  BR2_PACKAGE_HOST_GDB.

config BR2_PACKAGE_DIRECTB_DITHER_RGB16
	bool "DirectFB RGB16 dithering option has been renamed"
	select BR2_PACKAGE_DIRECTFB_DITHER_RGB16
	select BR2_LEGACY
	help
	  The option has been renamed
	  BR2_PACKAGE_DIRECTFB_DITHER_RGB16.

config BR2_PACKAGE_DIRECTB_TESTS
	bool "DirectFB Tests option has been renamed"
	select BR2_PACKAGE_DIRECTFB_TESTS
	select BR2_LEGACY
	help
	  The option has been renamed
	  BR2_PACKAGE_DIRECTFB_TESTS.

###############################################################################
comment "Legacy options removed in 2012.11"

config BR2_PACKAGE_CUSTOMIZE
	bool "customize package has been removed"
	select BR2_LEGACY
	help
	  The 'customize' special package has been removed. Instead,
	  we recommend to create either your own packages, or use a
	  post-build script to customize your root filesystem. See
	  Buildroot's documentation for more details.

config BR2_PACKAGE_XSERVER_xorg
	bool "X.org modular server"
	select BR2_LEGACY
	select BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
	help
	  The option has been renamed
	  BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR.

config BR2_PACKAGE_XSERVER_tinyx
	bool "KDrive / TinyX server"
	select BR2_LEGACY
	select BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE
	help
	  The option has been renamed
	  BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE.

config BR2_PACKAGE_PTHREAD_STUBS
	bool "pthread-stubs option has been renamed"
	select BR2_LEGACY
	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
	depends on BR2_PACKAGE_XORG7
	help
	  For consistency reason, the pthread-stubs package has been
	  renamed to xlib_libpthread-stubs.

###############################################################################
comment "Legacy options removed in 2012.08"

config BR2_PACKAGE_GETTEXT_STATIC
	bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB"
	select BR2_LEGACY
	help
	  To build a static gettext library, select BR2_PREFER_STATIC_LIB.


config BR2_PACKAGE_LIBINTL
	bool "libintl"
	select BR2_LEGACY
	select BR2_PACKAGE_GETTEXT
	help
	  libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now
	  only installs the library, not the executables.

config BR2_PACKAGE_INPUT_TOOLS_EVTEST
	bool "input-tools evtest is now a separate package evtest"
	select BR2_LEGACY
	select BR2_PACKAGE_EVTEST
	help
	  The evtest program from input-tools is now a separate package.

config BR2_BFIN_FDPIC
	bool "BR2_BFIN_FDPIC is now BR2_BINFMT_FDPIC"
	select BR2_BINFMT_FDPIC
	select BR2_LEGACY

config BR2_BFIN_FLAT
	bool "BR2_BFIN_FLAT is now BR2_BINFMT_FLAT"
	select BR2_BINFMT_FLAT
	select BR2_LEGACY

endmenu