# @_flash.bin            | bootloader
# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
# @_filesystem           | filesystem to burn
# @_kernel               | kernel image
# @_dtb                  | dtb image

# This command will be run when ROM support stream mode
# i.MX8QXP, i.MX8QM
SDPS: boot -f _flash.bin

FB: ucmd setenv fastboot_buffer ${loadaddr}
FB: download -f _image
# Burn image to nandfit partition if needed
FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}

FB[-t 10000]: ucmd ubi part nandrootfs
FB[-t 10000]: ucmd ubi create root -
FB: download -f _filesystem
FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}

FB: download -f _kernel
FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}

FB: download -f _dtb
FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}

FB: reboot
FB: done