#
config BR2_LARGEFILE
	bool "Enable large file (files > 2 GB) support?"
	depends on !BR2_cris
	help
	  If you are building your own toolchain and you want to 
	  support files larger than 2GB then enable this option.
	  If you have an external binary toolchain that has been 
	  built with large file support (files > 2GB) then enable 
	  this option.

config BR2_INET_IPV6
	bool "Enable IPv6"
	help
	  If you are building your own toolchain and you want to 
	  enable IPV6 support then enable this option.
	  If you have an external binary toolchain that has been 
	  built with IPV6 support then enable this option.

config BR2_INET_RPC
	bool "Enable RPC"
	help
	  Enable RPC. RPC support is needed for nfs.
	  If you are building your own toolchain and you want to 
	  enable RPC support then enable this option.
	  If you have an external binary toolchain that has been 
	  built with RPC support then enable this option.

config BR2_ENABLE_LOCALE
	bool "Enable toolchain locale/i18n support?"
	select BR2_USE_WCHAR
	help
	  If you are building your own toolchain and you want to 
	  enable locale/i18n support then enable this option.
	  If you have an external binary toolchain that has been 
	  built with locale/i18n support then enable this option.

config BR2_ENABLE_LOCALE_PREGENERATED
	bool "Use pregenerated locale data?"
	depends on BR2_ENABLE_LOCALE && BR2_TOOLCHAIN_SOURCE
	help
	  Instead of generating the locale data locally you can optionally
	  download a pregenerated set of locales.

	  Say N here unless your buildhost lacks locale support and you
	  desparately want to use internationalization on your target.

config BR2_ENABLE_LOCALE_PURGE
	bool "Purge unwanted locales"
	help
	  Explicitly specify what locales to install on target. If N
	  then all locales supported by packages are installed.

config BR2_ENABLE_LOCALE_WHITELIST
	string "Locales to keep"
	default "C en_US de fr"
	depends on BR2_ENABLE_LOCALE_PURGE
	help
	  Whitespace seperated list of locales to allow on target.
	  Locales not listed here will be removed from the target.
	  See 'locale -a' on your host for a list of locales available
	  on your build host, or have a look in /usr/share/locale in
	  the target file system for available locales.

	  Notice that listing a locale here doesn't guarantee that it
	  will be available on the target - That purely depends on the
	  support for that locale in the selected packages.

config BR2_USE_WCHAR
	bool "Enable WCHAR support"
	help
	  If you are building your own toolchain and you want to 
	  enable WCHAR support then enable this option.
	  If you have an external binary toolchain that has been built 
	  with WCHAR support then enable this option.

config BR2_SOFT_FLOAT
	bool "Use software floating point by default"
	depends on BR2_arm || BR2_armeb || BR2_avr32 || BR2_mips || BR2_mipsel || BR2_powerpc || BR2_nios2
	help
	  If your target CPU does not have a Floating Point Unit (FPU) or a
	  kernel FPU emulator, but you still wish to support floating point
	  functions, then everything will need to be compiled with soft
	  floating point support (-msoft-float).

	  Most people will answer N.

config BR2_USE_SSP
	bool "Enable stack protection support"
	help
	  Enable stack smashing protection support using GCCs
	  -fstack-protector[-all] option.

	  See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
	  for details.

choice
	prompt "Thread library implementation"
	default BR2_PTHREADS_OLD
	help
	  If you are building your own toolchain then select the type of 
	  libpthreads you want to use.
	  Not all thread variants work with all versions of uClibc,
	  the "linuxthreads (stable/old)" may be a working fallback
	  if you need threading at all.
	  If you have an external binary toolchain then select the type 
	  of libpthreads it was built with.

	config BR2_PTHREADS_NONE
		bool "none"

	config BR2_PTHREADS
		bool "linuxthreads"

	config BR2_PTHREADS_OLD
		bool "linuxthreads (stable/old)"

	config BR2_PTHREADS_NATIVE
		bool "Native POSIX Threading (NPTL)"
endchoice

config BR2_PROGRAM_INVOCATION
	bool "Enable 'program invocation name'"
	help
	  Support for the GNU-specific program_invocation_name and
	  program_invocation_short_name strings.  Some GNU packages
	  (like tar and coreutils) utilize these for extra useful
	  output, but in general are not required.
	  If you have an external binary toolchain that has been built
	  with program invocation support then enable this option.

config BR2_GCC_CROSS_CXX
	bool
	help
	  If you are building your own toolchain and want to build 
	  a C++ cross-compiler this needs to be enabled.
	  If you have an external binary toolchain that has a C++ compiler
	  and you want to use it then you need to enable this option.

config BR2_INSTALL_LIBSTDCPP
	bool "Build/install c++ compiler and libstdc++?"
	select BR2_LARGEFILE if (!BR2_GCC_SUPPORTS_SYSROOT && BR2_TOOLCHAIN_SOURCE)
	select BR2_GCC_CROSS_CXX
	help
	  If you are building your own toolchain and want to build and install
	  the C++ compiler and library then you need to enable this option.
	  If you have an external toolchain that has been built with C++ 
	  support and you want to use the compiler / library then you need 
	  to select this option.

config BR2_TARGET_OPTIMIZATION
	string "Target Optimizations"
	default "-Os -pipe"
	help
	  Optimizations to use when building for the target host.

if BR2_TOOLCHAIN_SOURCE
source "toolchain/elf2flt/Config.in"
source "toolchain/mklibs/Config.in"
source "toolchain/sstrip/Config.in"

config BR2_ENABLE_MULTILIB
	bool "Enable multilib support?"
	help
	    Build libraries to support different ABIs.

config BR2_VFP_FLOAT
	bool "Use ARM Vector Floating Point unit"
	depends on !BR2_SOFT_FLOAT
	depends on BR2_arm || BR2_armeb
	help
	  Setting this option will enable the "-mfpu=vfp" option.
	  If your ARM CPU has a Vector Floating Point Unit (VFP)
	  and the toolchain supports the option, then the 
	  code can be optimized.
	  
	  Most people will answer N.

config BR2_CROSS_TOOLCHAIN_TARGET_UTILS
	bool "Include target utils in cross toolchain"
	default y
	help
	  When using buildroot to build a deployable cross toolchain,
	  it is handy to include certain target apps with that toolchain
	  as a convenience.
	  Examples include ldd, gdbserver, and strace.

	  Answer Y if you want these apps (if built) copied into the
	  cross toolchain dir under <arch>-linux-uclibc/target_utils/.

endif