| tests = $(TEST_DIR)/selftest.elf |
| tests += $(TEST_DIR)/selftest-migration.elf |
| tests += $(TEST_DIR)/intercept.elf |
| tests += $(TEST_DIR)/emulator.elf |
| tests += $(TEST_DIR)/sieve.elf |
| tests += $(TEST_DIR)/sthyi.elf |
| tests += $(TEST_DIR)/tprot.elf |
| tests += $(TEST_DIR)/skey.elf |
| tests += $(TEST_DIR)/diag10.elf |
| tests += $(TEST_DIR)/diag308.elf |
| tests += $(TEST_DIR)/pfmf.elf |
| tests += $(TEST_DIR)/cmm.elf |
| tests += $(TEST_DIR)/vector.elf |
| tests += $(TEST_DIR)/gs.elf |
| tests += $(TEST_DIR)/iep.elf |
| tests += $(TEST_DIR)/cpumodel.elf |
| tests += $(TEST_DIR)/diag288.elf |
| tests += $(TEST_DIR)/stsi.elf |
| tests += $(TEST_DIR)/skrf.elf |
| tests += $(TEST_DIR)/smp.elf |
| tests += $(TEST_DIR)/sclp.elf |
| tests += $(TEST_DIR)/sck.elf |
| tests += $(TEST_DIR)/css.elf |
| tests += $(TEST_DIR)/uv-guest.elf |
| tests += $(TEST_DIR)/sie.elf |
| tests += $(TEST_DIR)/mvpg.elf |
| tests += $(TEST_DIR)/uv-host.elf |
| tests += $(TEST_DIR)/edat.elf |
| tests += $(TEST_DIR)/mvpg-sie.elf |
| tests += $(TEST_DIR)/spec_ex-sie.elf |
| tests += $(TEST_DIR)/spec_ex.elf |
| tests += $(TEST_DIR)/firq.elf |
| tests += $(TEST_DIR)/epsw.elf |
| tests += $(TEST_DIR)/adtl-status.elf |
| tests += $(TEST_DIR)/migration.elf |
| tests += $(TEST_DIR)/pv-attest.elf |
| tests += $(TEST_DIR)/migration-cmm.elf |
| tests += $(TEST_DIR)/migration-skey.elf |
| tests += $(TEST_DIR)/panic-loop-extint.elf |
| tests += $(TEST_DIR)/panic-loop-pgm.elf |
| tests += $(TEST_DIR)/migration-sck.elf |
| tests += $(TEST_DIR)/exittime.elf |
| tests += $(TEST_DIR)/ex.elf |
| tests += $(TEST_DIR)/topology.elf |
| tests += $(TEST_DIR)/sie-dat.elf |
| |
| pv-tests += $(TEST_DIR)/pv-diags.elf |
| pv-tests += $(TEST_DIR)/pv-icptcode.elf |
| pv-tests += $(TEST_DIR)/pv-ipl.elf |
| |
| ifneq ($(HOST_KEY_DOCUMENT),) |
| ifneq ($(GEN_SE_HEADER),) |
| tests += $(pv-tests) |
| endif |
| endif |
| |
| tests_binary = $(patsubst %.elf,%.bin,$(tests)) |
| ifneq ($(HOST_KEY_DOCUMENT),) |
| tests_pv_binary = $(patsubst %.bin,%.pv.bin,$(tests_binary)) |
| else |
| tests_pv_binary = |
| GEN_SE_HEADER = |
| endif |
| snippets-obj = $(patsubst %.gbin,%.gobj,$(snippets)) |
| |
| all: directories test_cases test_cases_binary test_cases_pv |
| |
| test_cases: $(tests) |
| test_cases_binary: $(tests_binary) |
| test_cases_pv: $(tests_pv_binary) |
| |
| INCLUDE_PATHS = $(SRCDIR)/lib $(SRCDIR)/lib/s390x $(SRCDIR)/s390x |
| # Include generated header files (e.g. in case of out-of-source builds) |
| INCLUDE_PATHS += lib |
| CPPFLAGS = $(addprefix -I,$(INCLUDE_PATHS)) |
| |
| CFLAGS += -std=gnu99 |
| CFLAGS += -ffreestanding |
| CFLAGS += $(CPPFLAGS) |
| CFLAGS += -O2 |
| CFLAGS += -march=zEC12 |
| CFLAGS += -mbackchain |
| CFLAGS += -fno-delete-null-pointer-checks |
| LDFLAGS += -Wl,--build-id=none |
| |
| # We want to keep intermediate files |
| .PRECIOUS: %.o %.lds |
| |
| asm-offsets = lib/$(ARCH)/asm-offsets.h |
| include $(SRCDIR)/scripts/asm-offsets.mak |
| |
| cflatobjs += lib/util.o |
| cflatobjs += lib/alloc.o |
| cflatobjs += lib/alloc_phys.o |
| cflatobjs += lib/alloc_page.o |
| cflatobjs += lib/vmalloc.o |
| cflatobjs += lib/alloc_phys.o |
| cflatobjs += lib/getchar.o |
| cflatobjs += lib/migrate.o |
| cflatobjs += lib/s390x/io.o |
| cflatobjs += lib/s390x/stack.o |
| cflatobjs += lib/s390x/sclp.o |
| cflatobjs += lib/s390x/sclp-console.o |
| cflatobjs += lib/s390x/interrupt.o |
| cflatobjs += lib/s390x/mmu.o |
| cflatobjs += lib/s390x/smp.o |
| cflatobjs += lib/s390x/hardware.o |
| cflatobjs += lib/s390x/css_dump.o |
| cflatobjs += lib/s390x/css_lib.o |
| cflatobjs += lib/s390x/malloc_io.o |
| cflatobjs += lib/s390x/uv.o |
| cflatobjs += lib/s390x/sie.o |
| cflatobjs += lib/s390x/fault.o |
| |
| OBJDIRS += lib/s390x |
| |
| asmlib = $(TEST_DIR)/cstart64.o $(TEST_DIR)/cpu.o |
| |
| FLATLIBS = $(libcflat) |
| |
| SNIPPET_DIR = $(TEST_DIR)/snippets |
| snippet_asmlib = $(SNIPPET_DIR)/c/cstart.o |
| snippet_lib = $(snippet_asmlib) lib/auxinfo.o |
| |
| # perquisites (=guests) for the snippet hosts. |
| # $(TEST_DIR)/<snippet-host>.elf: snippets = $(SNIPPET_DIR)/<c/asm>/<snippet>.gbin |
| $(TEST_DIR)/mvpg-sie.elf: snippets = $(SNIPPET_DIR)/c/mvpg-snippet.gbin |
| $(TEST_DIR)/sie-dat.elf: snippets = $(SNIPPET_DIR)/c/sie-dat.gbin |
| $(TEST_DIR)/spec_ex-sie.elf: snippets = $(SNIPPET_DIR)/c/spec_ex.gbin |
| |
| $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-yield.gbin |
| $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-288.gbin |
| $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-500.gbin |
| $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-icpt-112.gbin |
| $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/icpt-loop.gbin |
| $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/loop.gbin |
| $(TEST_DIR)/pv-icptcode.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-icpt-vir-timing.gbin |
| $(TEST_DIR)/pv-ipl.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-308.gbin |
| |
| ifneq ($(GEN_SE_HEADER),) |
| snippets += $(pv-snippets) |
| tests += $(pv-tests) |
| snippet-hdr-obj = $(patsubst %.gbin,%.hdr.obj,$(pv-snippets)) |
| else |
| snippet-hdr-obj = |
| endif |
| |
| # the asm/c snippets %.o have additional generated files as dependencies |
| $(SNIPPET_DIR)/asm/%.o: $(SNIPPET_DIR)/asm/%.S $(asm-offsets) |
| $(CC) $(CFLAGS) -c -nostdlib -o $@ $< |
| |
| $(SNIPPET_DIR)/c/%.o: $(SNIPPET_DIR)/c/%.c $(asm-offsets) |
| $(CC) $(CFLAGS) -c -nostdlib -o $@ $< |
| |
| $(SNIPPET_DIR)/asm/%.gbin: $(SNIPPET_DIR)/asm/%.o $(SNIPPET_DIR)/asm/flat.lds |
| $(CC) $(LDFLAGS) -o $@ -T $(SNIPPET_DIR)/asm/flat.lds $< |
| $(OBJCOPY) -O binary -j ".rodata" -j ".lowcore" -j ".text" -j ".data" -j ".bss" --set-section-flags .bss=alloc,load,contents $@ $@ |
| truncate -s '%4096' $@ |
| |
| $(SNIPPET_DIR)/c/%.gbin: $(SNIPPET_DIR)/c/%.o $(snippet_lib) $(FLATLIBS) $(SNIPPET_DIR)/c/flat.lds |
| $(CC) $(LDFLAGS) -o $@ -T $(SNIPPET_DIR)/c/flat.lds $< $(snippet_lib) $(FLATLIBS) |
| $(OBJCOPY) -O binary -j ".rodata" -j ".lowcore" -j ".text" -j ".data" -j ".bss" --set-section-flags .bss=alloc,load,contents $@ $@ |
| truncate -s '%4096' $@ |
| |
| %.hdr: %.gbin $(HOST_KEY_DOCUMENT) |
| $(GEN_SE_HEADER) -k $(HOST_KEY_DOCUMENT) -c $<,0x0,0x00000000000000420000000000000000 --psw-addr 0x4000 -o $@ |
| |
| .SECONDARY: |
| %.gobj: %.gbin |
| $(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $< $@ |
| |
| .SECONDARY: |
| %.hdr.obj: %.hdr |
| $(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $< $@ |
| |
| lds-autodepend-flags = -MMD -MF $(dir $*).$(notdir $*).d -MT $@ |
| %.lds: %.lds.S $(asm-offsets) |
| $(CPP) $(lds-autodepend-flags) $(CPPFLAGS) -P -C -o $@ $< |
| |
| %.aux.o: $(SRCDIR)/lib/auxinfo.c |
| $(CC) $(CFLAGS) -c -o $@ $< -DPROGNAME=\"$(@:.aux.o=.elf)\" |
| |
| .SECONDEXPANSION: |
| %.elf: $(FLATLIBS) $(asmlib) $(SRCDIR)/s390x/flat.lds $$(snippets-obj) $$(snippet-hdr-obj) %.o %.aux.o |
| @$(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/flat.lds \ |
| $(filter %.o, $^) $(FLATLIBS) $(snippets-obj) $(snippet-hdr-obj) || \ |
| { echo "Failure probably caused by missing definition of gen-se-header executable"; exit 1; } |
| @chmod a-x $@ |
| |
| # Secure Execution Customer Communication Key file |
| # 32 bytes of key material, uses existing one if available |
| comm-key = $(TEST_DIR)/comm.key |
| $(comm-key): |
| dd if=/dev/urandom of=$@ bs=32 count=1 status=none |
| |
| %.bin: %.elf |
| $(OBJCOPY) -O binary $< $@ |
| |
| # Will only be filled when dump has been enabled |
| GENPROTIMG_COMM_KEY = |
| # allow PCKMO |
| genprotimg_pcf = 0x000000e0 |
| |
| ifeq ($(CONFIG_DUMP),yes) |
| # The genprotimg arguments for the cck changed over time so we need to |
| # figure out which argument to use in order to set the cck |
| GENPROTIMG_HAS_COMM_KEY = $(shell $(GENPROTIMG) --help | grep -q -- --comm-key && echo yes) |
| ifeq ($(GENPROTIMG_HAS_COMM_KEY),yes) |
| GENPROTIMG_COMM_KEY = --comm-key $(comm-key) |
| else |
| GENPROTIMG_COMM_KEY = --x-comm-key $(comm-key) |
| endif |
| |
| # allow dumping + PCKMO |
| genprotimg_pcf = 0x200000e0 |
| endif |
| |
| # use x-pcf to be compatible with old genprotimg versions |
| genprotimg_args = --host-key-document $(HOST_KEY_DOCUMENT) --no-verify $(GENPROTIMG_COMM_KEY) --x-pcf $(genprotimg_pcf) |
| |
| %selftest.pv.bin: %selftest.bin $(HOST_KEY_DOCUMENT) $(patsubst %.pv.bin,%.parmfile,$@) $(comm-key) |
| $(GENPROTIMG) $(genprotimg_args) --parmfile $(patsubst %.pv.bin,%.parmfile,$@) --image $< -o $@ |
| |
| %.pv.bin: %.bin $(HOST_KEY_DOCUMENT) $(comm-key) |
| $(GENPROTIMG) $(genprotimg_args) --image $< -o $@ |
| |
| $(snippet_asmlib): $$(patsubst %.o,%.S,$$@) $(asm-offsets) |
| $(CC) $(CFLAGS) -c -nostdlib -o $@ $< |
| |
| |
| arch_clean: asm_offsets_clean |
| $(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d $(comm-key) |
| |
| generated-files = $(asm-offsets) |
| $(tests:.elf=.o) $(asmlib) $(cflatobjs): $(generated-files) |