| /* |
| * Entry point and assembler functions for ppc64 tests. |
| * |
| * Copyright (C) 2016, Red Hat Inc, Andrew Jones <drjones@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU LGPL, version 2. |
| */ |
| #define __ASSEMBLY__ |
| #include <asm/hcall.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/rtas.h> |
| #include <asm/ptrace.h> |
| |
| #include "spapr.h" |
| |
| #define P_HANDLER 0x2ff8 |
| |
| .section .init |
| |
| /* |
| * start is the entry point. r3 points to the DTB |
| */ |
| .globl start |
| start: |
| FIXUP_ENDIAN |
| /* |
| * We were loaded at QEMU's kernel load address, but we're not |
| * allowed to link there due to how QEMU deals with linker VMAs, |
| * so we just linked at zero. This means the first thing to do is |
| * to find our stack and toc, and then do a relocate. |
| */ |
| LOAD_REG_IMMEDIATE(r31, SPAPR_KERNEL_LOAD_ADDR) |
| ld r1, (p_stack - start)(r31) |
| ld r2, (p_toc - start)(r31) |
| add r1, r1, r31 |
| add r2, r2, r31 |
| |
| /* save DTB pointer */ |
| std r3, 56(r1) |
| |
| /* |
| * Call relocate. relocate is C code, but careful to not use |
| * any global references, as they may use absolute addresses, |
| * which are, obviously, not yet relocated. |
| */ |
| mr r3, r31 |
| ld r4, (p_dyn - start)(r31) |
| add r4, r4, r31 |
| bl relocate |
| |
| /* compute address of call_handler */ |
| |
| LOAD_REG_ADDR(r4, call_handler) |
| std r4, P_HANDLER(0) |
| |
| /* relocate vector table to base address 0x0 (MSR_IP = 0) */ |
| |
| /* source: r4, dest end: r5, destination: r6 */ |
| |
| LOAD_REG_ADDR(r4, __start_interrupts) |
| LOAD_REG_ADDR(r5, __end_interrupts) |
| sub r5,r5,r4 |
| li r6,0x100 |
| |
| sub r4,r4,r6 |
| add r5,r5,r6 |
| addi r6,r6,-8 |
| 2: li r0,8 |
| mtctr r0 |
| /* copy a cache line size */ |
| 3: addi r6,r6,8 |
| ldx r0,r6,r4 |
| stdx r0,0,r6 |
| bdnz 3b |
| dcbst 0,r6 |
| /* flush icache */ |
| sync |
| icbi 0,r6 |
| cmpld 0,r6,r5 |
| blt 2b |
| sync |
| isync |
| |
| /* patch sc1 if needed */ |
| bl hcall_have_broken_sc1 |
| cmpwi r3, 0 |
| beq 1f |
| LOAD_REG_ADDR(r3, hcall) |
| LOAD_REG_IMMEDIATE(r4, SC1_REPLACEMENT) |
| stw r4, 0(r3) |
| |
| /* complete setup */ |
| 1: ld r3, 56(r1) |
| bl setup |
| |
| /* run the test */ |
| LOAD_REG_ADDR(r3, __argc) |
| LOAD_REG_ADDR(r4, __argv) |
| LOAD_REG_ADDR(r5, __environ) |
| lwz r3, 0(r3) |
| bl main |
| bl exit |
| b halt |
| |
| .align 3 |
| p_stack: .llong stackptr |
| p_toc: .llong tocptr |
| p_dyn: .llong dynamic_start |
| |
| .text |
| .align 3 |
| |
| .globl hcall |
| hcall: |
| sc 1 |
| blr |
| |
| .globl halt |
| halt: |
| 1: b 1b |
| |
| .globl enter_rtas |
| enter_rtas: |
| LOAD_REG_ADDR(r11, rtas_entry) |
| ld r10, 0(r11) |
| |
| cmpdi r10,0 |
| bne external_rtas |
| |
| /* Use H_RTAS directly */ |
| mr r4,r3 |
| lis r3,KVMPPC_H_RTAS@h |
| ori r3,r3,KVMPPC_H_RTAS@l |
| b hcall |
| |
| external_rtas: |
| /* Use external RTAS blob */ |
| mflr r0 |
| std r0, 16(r1) |
| |
| LOAD_REG_ADDR(r11, rtas_return_loc) |
| mtlr r11 |
| |
| mfmsr r11 |
| LOAD_REG_IMMEDIATE(r9, RTAS_MSR_MASK) |
| and r11, r11, r9 |
| mtsrr0 r10 |
| mtsrr1 r11 |
| rfid |
| b . |
| |
| rtas_return_loc: |
| FIXUP_ENDIAN |
| ld r0, 16(r1) |
| mtlr r0 |
| blr |
| |
| call_handler: |
| /* save context */ |
| |
| /* GPRs */ |
| |
| .irp i, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 \ |
| 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 |
| SAVE_GPR(\i, r1) |
| .endr |
| mfsprg1 r0 |
| std r0,GPR1(r1) |
| |
| /* lr, xer, ccr */ |
| |
| mflr r0 |
| std r0,_LINK(r1) |
| |
| mfxer r0 |
| std r0,_XER(r1) |
| |
| mfcr r0 |
| std r0,_CCR(r1) |
| |
| /* nip and msr */ |
| |
| mfsrr0 r0 |
| std r0, _NIP(r1) |
| |
| mfsrr1 r0 |
| std r0, _MSR(r1) |
| |
| /* restore TOC pointer */ |
| |
| LOAD_REG_IMMEDIATE(r31, SPAPR_KERNEL_LOAD_ADDR) |
| ld r2, (p_toc - start)(r31) |
| |
| /* FIXME: build stack frame */ |
| |
| /* call generic handler */ |
| |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl do_handle_exception |
| |
| /* restore context */ |
| |
| ld r0,_CTR(r1) |
| mtctr r0 |
| |
| ld r0,_LINK(r1) |
| mtlr r0 |
| |
| ld r0,_XER(r1) |
| mtxer r0 |
| |
| ld r0,_CCR(r1) |
| mtcr r0 |
| |
| ld r0, _NIP(r1) |
| mtsrr0 r0 |
| |
| ld r0, _MSR(r1) |
| mtsrr1 r0 |
| |
| .irp i, 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 \ |
| 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 |
| REST_GPR(\i, r1) |
| .endr |
| |
| /* restore r1, as we don't need it anymore */ |
| |
| REST_GPR(1,r1) |
| |
| rfid |
| b . |
| |
| .section .text.ex |
| |
| .macro VECTOR vec |
| . = \vec |
| |
| mtsprg1 r1 /* save r1 */ |
| mfsprg0 r1 /* get exception stack address */ |
| subi r1,r1, INT_FRAME_SIZE |
| |
| /* save r0 and ctr to call generic handler */ |
| |
| SAVE_GPR(0,r1) |
| |
| mfctr r0 |
| std r0,_CTR(r1) |
| |
| ld r0, P_HANDLER(0) |
| mtctr r0 |
| |
| li r0,\vec |
| std r0,_TRAP(r1) |
| |
| bctr |
| .endm |
| |
| . = 0x100 |
| .globl __start_interrupts |
| __start_interrupts: |
| |
| VECTOR(0x100) |
| VECTOR(0x200) |
| VECTOR(0x300) |
| VECTOR(0x400) |
| VECTOR(0x500) |
| VECTOR(0x600) |
| VECTOR(0x700) |
| VECTOR(0x800) |
| VECTOR(0x900) |
| |
| .align 7 |
| .globl __end_interrupts |
| __end_interrupts: |
| .org P_HANDLER |
| .llong 0 |