#!/usr/bin/env bash

if [ -z "${BASH_VERSINFO[0]}" ] || [ "${BASH_VERSINFO[0]}" -lt 4 ] ; then
    echo "Error: Bash version 4 or newer is required for the kvm-unit-tests"
    exit 1
fi

srcdir=$(cd "$(dirname "$0")"; pwd)
prefix=/usr/local
cc=gcc
cflags=
ld=ld
objcopy=objcopy
objdump=objdump
ar=ar
addr2line=addr2line
arch=$(uname -m | sed -e 's/i.86/i386/;s/arm64/aarch64/;s/arm.*/arm/;s/ppc64.*/ppc64/')
host=$arch
cross_prefix=
endian=""
pretty_print_stacks=yes
environ_default=yes
u32_long=
wa_divide=
target=
errata_force=0
erratatxt="$srcdir/errata.txt"
host_key_document=
gen_se_header=
page_size=
earlycon=
efi=

# Enable -Werror by default for git repositories only (i.e. developer builds)
if [ -e "$srcdir"/.git ]; then
    werror=-Werror
else
    werror=
fi

usage() {
    cat <<-EOF
	Usage: $0 [options]

	Options include:
	    --arch=ARCH            architecture to compile for ($arch)
	    --processor=PROCESSOR  processor to compile for ($arch)
	    --target=TARGET        target platform that the tests will be running on (qemu or
	                           kvmtool, default is qemu) (arm/arm64 only)
	    --cross-prefix=PREFIX  cross compiler prefix
	    --cc=CC                c compiler to use ($cc)
	    --cflags=FLAGS         extra options to be passed to the c compiler
	    --ld=LD                ld linker to use ($ld)
	    --prefix=PREFIX        where to install things ($prefix)
	    --endian=ENDIAN        endianness to compile for (little or big, ppc64 only)
	    --[enable|disable]-pretty-print-stacks
	                           enable or disable pretty stack printing (enabled by default)
	    --[enable|disable]-default-environ
	                           enable or disable the generation of a default environ when
	                           no environ is provided by the user (enabled by default)
	    --erratatxt=FILE       specify a file to use instead of errata.txt. Use
	                           '--erratatxt=' to ensure no file is used.
	    --host-key-document=HOST_KEY_DOCUMENT
	                           Specify the machine-specific host-key document for creating
	                           a PVM image with 'genprotimg' (s390x only)
	    --gen-se-header=GEN_SE_HEADER
	                           Provide an executable to generate a PV header
	                           requires --host-key-document. (s390x-snippets only)
	    --page-size=PAGE_SIZE
	                           Specify the page size (translation granule) (4k, 16k or
	                           64k, default is 64k, arm64 only)
	    --earlycon=EARLYCON
	                           Specify the UART name, type and address (optional, arm and
	                           arm64 only). The specified address will overwrite the UART
	                           address set by the --target option. EARLYCON can be one of
	                           (case sensitive):
	               uart[8250],mmio,ADDR
	                           Specify an 8250 compatible UART at address ADDR. Supported
	                           register stride is 8 bit only.
	               pl011,ADDR
	               pl011,mmio32,ADDR
	                           Specify a PL011 compatible UART at address ADDR. Supported
	                           register stride is 32 bit only.
	    --[enable|disable]-efi Boot and run from UEFI (disabled by default, x86_64 only)
	    --[enable|disable]-werror
	                           Select whether to compile with the -Werror compiler flag
EOF
    exit 1
}

while [[ "$1" = -* ]]; do
    opt="$1"; shift
    arg=
    if [[ "$opt" = *=* ]]; then
	arg="${opt#*=}"
	opt="${opt%%=*}"
    fi
    case "$opt" in
	--prefix)
	    prefix="$arg"
	    ;;
        --arch)
	    arch="$arg"
	    ;;
        --processor)
	    processor="$arg"
	    ;;
	--target)
	    target="$arg"
	    ;;
	--cross-prefix)
	    cross_prefix="$arg"
	    ;;
	--endian)
	    endian="$arg"
	    ;;
	--cc)
	    cc="$arg"
	    ;;
	--cflags)
	    cflags="$arg"
	    ;;
	--ld)
	    ld="$arg"
	    ;;
	--enable-pretty-print-stacks)
	    pretty_print_stacks=yes
	    ;;
	--disable-pretty-print-stacks)
	    pretty_print_stacks=no
	    ;;
	--enable-default-environ)
	    environ_default=yes
	    ;;
	--disable-default-environ)
	    environ_default=no
	    ;;
	--erratatxt)
	    erratatxt=
	    [ "$arg" ] && erratatxt=$(eval realpath "$arg")
	    ;;
	--host-key-document)
	    host_key_document="$arg"
	    ;;
	--gen-se-header)
	    gen_se_header="$arg"
	    ;;
	--page-size)
	    page_size="$arg"
	    ;;
	--earlycon)
	    earlycon="$arg"
	    ;;
	--enable-efi)
	    efi=y
	    ;;
	--disable-efi)
	    efi=n
	    ;;
	--enable-werror)
	    werror=-Werror
	    ;;
	--disable-werror)
	    werror=
	    ;;
	--help)
	    usage
	    ;;
	*)
	    usage
	    ;;
    esac
done

if [ -n "$host_key_document" ] && [ ! -f "$host_key_document" ]; then
    echo "Host key document doesn't exist at the specified location."
    exit 1
fi

if [ "$erratatxt" ] && [ ! -f "$erratatxt" ]; then
    echo "erratatxt: $erratatxt does not exist or is not a regular file"
    exit 1
fi

arch_name=$arch
[ "$arch" = "aarch64" ] && arch="arm64"
[ "$arch_name" = "arm64" ] && arch_name="aarch64"

if [ -z "$target" ]; then
    target="qemu"
else
    if [ "$arch" != "arm64" ] && [ "$arch" != "arm" ]; then
        echo "--target is not supported for $arch"
        usage
    fi
fi

if [ "$efi" ] && [ "$arch" != "x86_64" ]; then
    echo "--[enable|disable]-efi is not supported for $arch"
    usage
fi

if [ -z "$page_size" ]; then
    [ "$arch" = "arm64" ] && page_size="65536"
    [ "$arch" = "arm" ] && page_size="4096"
else
    if [ "$arch" != "arm64" ]; then
        echo "--page-size is not supported for $arch"
        usage
    fi

    if [ "${page_size: -1}" = "K" ] || [ "${page_size: -1}" = "k" ]; then
        page_size=$(( ${page_size%?} * 1024 ))
    fi
    if [ "$page_size" != "4096" ] && [ "$page_size" != "16384" ] &&
           [ "$page_size" != "65536" ]; then
        echo "arm64 doesn't support page size of $page_size"
        usage
    fi
fi

[ -z "$processor" ] && processor="$arch"

if [ "$processor" = "arm64" ]; then
    processor="cortex-a57"
elif [ "$processor" = "arm" ]; then
    processor="cortex-a15"
fi

if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
    testdir=x86
elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
    testdir=arm
    if [ "$target" = "qemu" ]; then
        arm_uart_early_addr=0x09000000
    elif [ "$target" = "kvmtool" ]; then
        arm_uart_early_addr=0x1000000
        errata_force=1
    else
        echo "--target must be one of 'qemu' or 'kvmtool'!"
        usage
    fi

    if [ "$earlycon" ]; then
        IFS=, read -r name type_addr addr <<<"$earlycon"
        if [ "$name" != "uart" ] && [ "$name" != "uart8250" ] &&
                [ "$name" != "pl011" ]; then
            echo "unknown earlycon name: $name"
            usage
        fi

        if [ "$name" = "pl011" ]; then
            if [ -z "$addr" ]; then
                addr=$type_addr
            else
                if [ "$type_addr" != "mmio32" ]; then
                    echo "unknown $name earlycon type: $type_addr"
                    usage
                fi
            fi
        else
            if [ "$type_addr" != "mmio" ]; then
                echo "unknown $name earlycon type: $type_addr"
                usage
            fi
        fi

        if [ -z "$addr" ]; then
            echo "missing $name earlycon address"
            usage
        fi
        if [[ $addr =~ ^0(x|X)[0-9a-fA-F]+$ ]] ||
                [[ $addr =~ ^[0-9]+$ ]]; then
            arm_uart_early_addr=$addr
        else
            echo "invalid $name earlycon address: $addr"
            usage
        fi
    fi
elif [ "$arch" = "ppc64" ]; then
    testdir=powerpc
    firmware="$testdir/boot_rom.bin"
    if [ "$endian" != "little" ] && [ "$endian" != "big" ]; then
        echo "You must provide endianness (big or little)!"
        usage
    fi
else
    testdir=$arch
fi
if [ ! -d "$srcdir/$testdir" ]; then
    echo "$testdir does not exist!"
    exit 1
fi
if [ -f "$srcdir/$testdir/run" ]; then
    ln -fs "$srcdir/$testdir/run" $testdir-run
fi

testsubdir=$testdir
if [ "$efi" = "y" ]; then
    testsubdir=$testdir/efi
fi

# check if uint32_t needs a long format modifier
cat << EOF > lib-test.c
__UINT32_TYPE__
EOF
u32_long=$("$cross_prefix$cc" -E lib-test.c | grep -v '^#' | grep -q long && echo yes)
rm -f lib-test.c

# check if slash can be used for division
if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
  cat << EOF > lib-test.S
foo:
    movl (8 / 2), %eax
EOF
  wa_divide=$("$cross_prefix$cc" -c lib-test.S >/dev/null 2>&1 || echo yes)
  rm -f lib-test.{o,S}
fi

# require enhanced getopt
getopt -T > /dev/null
if [ $? -ne 4 ]; then
    echo "Enhanced getopt is not available, add it to your PATH?"
    exit 1
fi

# Are we in a separate build tree? If so, link the Makefile
# and shared stuff so that 'make' and run_tests.sh work.
if test ! -e Makefile; then
    echo "linking Makefile..."
    ln -s "$srcdir/Makefile" .

    echo "linking tests..."
    mkdir -p $testsubdir
    ln -sf "$srcdir/$testdir/run" $testdir/
    if test "$testdir" != "$testsubdir"; then
        ln -sf "$srcdir/$testsubdir/run" $testsubdir/
    fi
    ln -sf "$srcdir/$testdir/unittests.cfg" $testdir/
    ln -sf "$srcdir/run_tests.sh"

    if [ -d "$srcdir/$testdir/snippets" ]; then
        mkdir -p "$testdir/snippets/c"
    fi

    echo "linking scripts..."
    ln -sf "$srcdir/scripts"
fi

# link lib/asm for the architecture
rm -f lib/asm
asm="asm-generic"
if [ -d "$srcdir/lib/$arch/asm" ]; then
	asm="$srcdir/lib/$arch/asm"
elif [ -d "$srcdir/lib/$testdir/asm" ]; then
	asm="$srcdir/lib/$testdir/asm"
fi
mkdir -p lib
ln -sf "$asm" lib/asm


# create the config
cat <<EOF > config.mak
SRCDIR=$srcdir
PREFIX=$prefix
HOST=$host
ARCH=$arch
ARCH_NAME=$arch_name
PROCESSOR=$processor
CC=$cross_prefix$cc
CFLAGS=$cflags
LD=$cross_prefix$ld
OBJCOPY=$cross_prefix$objcopy
OBJDUMP=$cross_prefix$objdump
AR=$cross_prefix$ar
ADDR2LINE=$cross_prefix$addr2line
TEST_DIR=$testdir
TEST_SUBDIR=$testsubdir
FIRMWARE=$firmware
ENDIAN=$endian
PRETTY_PRINT_STACKS=$pretty_print_stacks
ENVIRON_DEFAULT=$environ_default
ERRATATXT=$erratatxt
U32_LONG_FMT=$u32_long
WA_DIVIDE=$wa_divide
GENPROTIMG=${GENPROTIMG-genprotimg}
HOST_KEY_DOCUMENT=$host_key_document
CONFIG_EFI=$efi
CONFIG_WERROR=$werror
GEN_SE_HEADER=$gen_se_header
EOF
if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
    echo "TARGET=$target" >> config.mak
fi

cat <<EOF > lib/config.h
#ifndef _CONFIG_H_
#define _CONFIG_H_
/*
 * Generated file. DO NOT MODIFY.
 *
 */

EOF
if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
cat <<EOF >> lib/config.h

#define CONFIG_UART_EARLY_BASE ${arm_uart_early_addr}
#define CONFIG_ERRATA_FORCE ${errata_force}
#define CONFIG_PAGE_SIZE _AC(${page_size}, UL)

EOF
fi
echo "#endif" >> lib/config.h