| #This is a make file with common rules for both x86 & x86-64 |
| |
| all: directories test_cases |
| |
| cflatobjs += lib/pci.o |
| cflatobjs += lib/pci-edu.o |
| cflatobjs += lib/alloc.o |
| cflatobjs += lib/auxinfo.o |
| cflatobjs += lib/vmalloc.o |
| cflatobjs += lib/alloc_page.o |
| cflatobjs += lib/alloc_phys.o |
| cflatobjs += lib/x86/setup.o |
| cflatobjs += lib/x86/io.o |
| cflatobjs += lib/x86/smp.o |
| cflatobjs += lib/x86/vm.o |
| cflatobjs += lib/x86/fwcfg.o |
| cflatobjs += lib/x86/apic.o |
| cflatobjs += lib/x86/atomic.o |
| cflatobjs += lib/x86/desc.o |
| cflatobjs += lib/x86/isr.o |
| cflatobjs += lib/x86/acpi.o |
| cflatobjs += lib/x86/stack.o |
| cflatobjs += lib/x86/fault_test.o |
| cflatobjs += lib/x86/delay.o |
| cflatobjs += lib/x86/pmu.o |
| ifeq ($(CONFIG_EFI),y) |
| cflatobjs += lib/x86/amd_sev.o |
| cflatobjs += lib/efi.o |
| cflatobjs += x86/efi/reloc_x86_64.o |
| endif |
| |
| OBJDIRS += lib/x86 |
| |
| $(libcflat): LDFLAGS += -nostdlib $(arch_LDFLAGS) |
| $(libcflat): CFLAGS += -ffreestanding -I $(SRCDIR)/lib -I lib |
| |
| COMMON_CFLAGS += -m$(bits) |
| ifneq ($(WA_DIVIDE),) |
| COMMON_CFLAGS += -Wa,--divide |
| endif |
| COMMON_CFLAGS += -O1 |
| |
| # stack.o relies on frame pointers. |
| KEEP_FRAME_POINTER := y |
| |
| FLATLIBS = lib/libcflat.a |
| |
| ifeq ($(CONFIG_EFI),y) |
| .PRECIOUS: %.efi %.so |
| |
| %.so: %.o $(FLATLIBS) $(SRCDIR)/x86/efi/elf_x86_64_efi.lds $(cstart.o) |
| $(LD) -T $(SRCDIR)/x86/efi/elf_x86_64_efi.lds $(EFI_LDFLAGS) -o $@ \ |
| $(filter %.o, $^) $(FLATLIBS) |
| @chmod a-x $@ |
| |
| %.efi: %.so |
| $(OBJCOPY) \ |
| -j .text -j .sdata -j .data -j .dynamic -j .dynsym -j .rel \ |
| -j .rela -j .reloc -S --target=$(FORMAT) $< $@ |
| @chmod a-x $@ |
| else |
| # We want to keep intermediate file: %.elf and %.o |
| .PRECIOUS: %.elf %.o |
| |
| %.elf: LDFLAGS = -nostdlib $(arch_LDFLAGS) |
| %.elf: %.o $(FLATLIBS) $(SRCDIR)/x86/flat.lds $(cstart.o) |
| $(LD) $(LDFLAGS) -T $(SRCDIR)/x86/flat.lds -o $@ \ |
| $(filter %.o, $^) $(FLATLIBS) |
| @chmod a-x $@ |
| |
| %.flat: %.elf |
| $(OBJCOPY) -O elf32-i386 $^ $@ |
| @chmod a-x $@ |
| endif |
| |
| tests-common = $(TEST_DIR)/vmexit.$(exe) $(TEST_DIR)/tsc.$(exe) \ |
| $(TEST_DIR)/smptest.$(exe) $(TEST_DIR)/dummy.$(exe) \ |
| $(TEST_DIR)/msr.$(exe) \ |
| $(TEST_DIR)/hypercall.$(exe) $(TEST_DIR)/sieve.$(exe) \ |
| $(TEST_DIR)/kvmclock_test.$(exe) \ |
| $(TEST_DIR)/s3.$(exe) $(TEST_DIR)/pmu.$(exe) $(TEST_DIR)/setjmp.$(exe) \ |
| $(TEST_DIR)/tsc_adjust.$(exe) $(TEST_DIR)/asyncpf.$(exe) \ |
| $(TEST_DIR)/init.$(exe) \ |
| $(TEST_DIR)/hyperv_synic.$(exe) $(TEST_DIR)/hyperv_stimer.$(exe) \ |
| $(TEST_DIR)/hyperv_connections.$(exe) \ |
| $(TEST_DIR)/tsx-ctrl.$(exe) \ |
| $(TEST_DIR)/emulator.$(exe) \ |
| $(TEST_DIR)/eventinj.$(exe) \ |
| $(TEST_DIR)/smap.$(exe) \ |
| $(TEST_DIR)/umip.$(exe) |
| |
| # The following test cases are disabled when building EFI tests because they |
| # use absolute addresses in their inline assembly code, which cannot compile |
| # with the '-fPIC' flag |
| ifneq ($(CONFIG_EFI),y) |
| tests-common += $(TEST_DIR)/realmode.$(exe) |
| endif |
| |
| test_cases: $(tests-common) $(tests) |
| |
| $(TEST_DIR)/%.o: CFLAGS += -std=gnu99 -ffreestanding -I $(SRCDIR)/lib -I $(SRCDIR)/lib/x86 -I lib |
| |
| $(TEST_DIR)/realmode.elf: $(TEST_DIR)/realmode.o |
| $(LD) -m elf_i386 -nostdlib -o $@ \ |
| -T $(SRCDIR)/$(TEST_DIR)/realmode.lds $^ |
| |
| $(TEST_DIR)/realmode.o: bits = $(if $(call cc-option,-m16,""),16,32) |
| |
| $(TEST_DIR)/access_test.$(bin): $(TEST_DIR)/access.o |
| |
| $(TEST_DIR)/vmx.$(bin): $(TEST_DIR)/access.o |
| |
| $(TEST_DIR)/svm_npt.$(bin): $(TEST_DIR)/svm.o |
| |
| $(TEST_DIR)/kvmclock_test.$(bin): $(TEST_DIR)/kvmclock.o |
| |
| $(TEST_DIR)/hyperv_synic.$(bin): $(TEST_DIR)/hyperv.o |
| |
| $(TEST_DIR)/hyperv_stimer.$(bin): $(TEST_DIR)/hyperv.o |
| |
| $(TEST_DIR)/hyperv_connections.$(bin): $(TEST_DIR)/hyperv.o |
| |
| arch_clean: |
| $(RM) $(TEST_DIR)/*.o $(TEST_DIR)/*.flat $(TEST_DIR)/*.elf \ |
| $(TEST_DIR)/.*.d lib/x86/.*.d \ |
| $(TEST_DIR)/efi/*.o $(TEST_DIR)/efi/.*.d \ |
| $(TEST_DIR)/*.so $(TEST_DIR)/*.efi |