| #include <linux/virtio_ring.h> |
| #include <linux/types.h> |
| #include <sys/uio.h> |
| #include <stdlib.h> |
| |
| #include "kvm/guest_compat.h" |
| #include "kvm/barrier.h" |
| #include "kvm/virtio.h" |
| #include "kvm/virtio-pci.h" |
| #include "kvm/virtio-mmio.h" |
| #include "kvm/util.h" |
| #include "kvm/kvm.h" |
| |
| |
| const char* virtio_trans_name(enum virtio_trans trans) |
| { |
| if (trans == VIRTIO_PCI) |
| return "pci"; |
| else if (trans == VIRTIO_MMIO) |
| return "mmio"; |
| return "unknown"; |
| } |
| |
| void virt_queue__used_idx_advance(struct virt_queue *queue, u16 jump) |
| { |
| u16 idx = virtio_guest_to_host_u16(queue, queue->vring.used->idx); |
| |
| /* |
| * Use wmb to assure that used elem was updated with head and len. |
| * We need a wmb here since we can't advance idx unless we're ready |
| * to pass the used element to the guest. |
| */ |
| wmb(); |
| idx += jump; |
| queue->vring.used->idx = virtio_host_to_guest_u16(queue, idx); |
| } |
| |
| struct vring_used_elem * |
| virt_queue__set_used_elem_no_update(struct virt_queue *queue, u32 head, |
| u32 len, u16 offset) |
| { |
| struct vring_used_elem *used_elem; |
| u16 idx = virtio_guest_to_host_u16(queue, queue->vring.used->idx); |
| |
| idx += offset; |
| used_elem = &queue->vring.used->ring[idx % queue->vring.num]; |
| used_elem->id = virtio_host_to_guest_u32(queue, head); |
| used_elem->len = virtio_host_to_guest_u32(queue, len); |
| |
| return used_elem; |
| } |
| |
| struct vring_used_elem *virt_queue__set_used_elem(struct virt_queue *queue, u32 head, u32 len) |
| { |
| struct vring_used_elem *used_elem; |
| |
| used_elem = virt_queue__set_used_elem_no_update(queue, head, len, 0); |
| virt_queue__used_idx_advance(queue, 1); |
| |
| return used_elem; |
| } |
| |
| static inline bool virt_desc__test_flag(struct virt_queue *vq, |
| struct vring_desc *desc, u16 flag) |
| { |
| return !!(virtio_guest_to_host_u16(vq, desc->flags) & flag); |
| } |
| |
| /* |
| * Each buffer in the virtqueues is actually a chain of descriptors. This |
| * function returns the next descriptor in the chain, or max if we're at the |
| * end. |
| */ |
| static unsigned next_desc(struct virt_queue *vq, struct vring_desc *desc, |
| unsigned int i, unsigned int max) |
| { |
| unsigned int next; |
| |
| /* If this descriptor says it doesn't chain, we're done. */ |
| if (!virt_desc__test_flag(vq, &desc[i], VRING_DESC_F_NEXT)) |
| return max; |
| |
| next = virtio_guest_to_host_u16(vq, desc[i].next); |
| |
| /* Ensure they're not leading us off end of descriptors. */ |
| return min(next, max); |
| } |
| |
| u16 virt_queue__get_head_iov(struct virt_queue *vq, struct iovec iov[], u16 *out, u16 *in, u16 head, struct kvm *kvm) |
| { |
| struct vring_desc *desc; |
| u16 idx; |
| u16 max; |
| |
| idx = head; |
| *out = *in = 0; |
| max = vq->vring.num; |
| desc = vq->vring.desc; |
| |
| if (virt_desc__test_flag(vq, &desc[idx], VRING_DESC_F_INDIRECT)) { |
| max = virtio_guest_to_host_u32(vq, desc[idx].len) / sizeof(struct vring_desc); |
| desc = guest_flat_to_host(kvm, virtio_guest_to_host_u64(vq, desc[idx].addr)); |
| idx = 0; |
| } |
| |
| do { |
| /* Grab the first descriptor, and check it's OK. */ |
| iov[*out + *in].iov_len = virtio_guest_to_host_u32(vq, desc[idx].len); |
| iov[*out + *in].iov_base = guest_flat_to_host(kvm, |
| virtio_guest_to_host_u64(vq, desc[idx].addr)); |
| /* If this is an input descriptor, increment that count. */ |
| if (virt_desc__test_flag(vq, &desc[idx], VRING_DESC_F_WRITE)) |
| (*in)++; |
| else |
| (*out)++; |
| } while ((idx = next_desc(vq, desc, idx, max)) != max); |
| |
| return head; |
| } |
| |
| u16 virt_queue__get_iov(struct virt_queue *vq, struct iovec iov[], u16 *out, u16 *in, struct kvm *kvm) |
| { |
| u16 head; |
| |
| head = virt_queue__pop(vq); |
| |
| return virt_queue__get_head_iov(vq, iov, out, in, head, kvm); |
| } |
| |
| /* in and out are relative to guest */ |
| u16 virt_queue__get_inout_iov(struct kvm *kvm, struct virt_queue *queue, |
| struct iovec in_iov[], struct iovec out_iov[], |
| u16 *in, u16 *out) |
| { |
| struct vring_desc *desc; |
| u16 head, idx; |
| |
| idx = head = virt_queue__pop(queue); |
| *out = *in = 0; |
| do { |
| u64 addr; |
| desc = virt_queue__get_desc(queue, idx); |
| addr = virtio_guest_to_host_u64(queue, desc->addr); |
| if (virt_desc__test_flag(queue, desc, VRING_DESC_F_WRITE)) { |
| in_iov[*in].iov_base = guest_flat_to_host(kvm, addr); |
| in_iov[*in].iov_len = virtio_guest_to_host_u32(queue, desc->len); |
| (*in)++; |
| } else { |
| out_iov[*out].iov_base = guest_flat_to_host(kvm, addr); |
| out_iov[*out].iov_len = virtio_guest_to_host_u32(queue, desc->len); |
| (*out)++; |
| } |
| if (virt_desc__test_flag(queue, desc, VRING_DESC_F_NEXT)) |
| idx = virtio_guest_to_host_u16(queue, desc->next); |
| else |
| break; |
| } while (1); |
| |
| return head; |
| } |
| |
| void virtio_exit_vq(struct kvm *kvm, struct virtio_device *vdev, |
| void *dev, int num) |
| { |
| struct virt_queue *vq = vdev->ops->get_vq(kvm, dev, num); |
| |
| if (vq->enabled && vdev->ops->exit_vq) |
| vdev->ops->exit_vq(kvm, dev, num); |
| memset(vq, 0, sizeof(*vq)); |
| } |
| |
| int virtio__get_dev_specific_field(int offset, bool msix, u32 *config_off) |
| { |
| if (msix) { |
| if (offset < 4) |
| return VIRTIO_PCI_O_MSIX; |
| else |
| offset -= 4; |
| } |
| |
| *config_off = offset; |
| |
| return VIRTIO_PCI_O_CONFIG; |
| } |
| |
| bool virtio_queue__should_signal(struct virt_queue *vq) |
| { |
| u16 old_idx, new_idx, event_idx; |
| |
| /* |
| * Use mb to assure used idx has been increased before we signal the |
| * guest, and we don't read a stale value for used_event. Without a mb |
| * here we might not send a notification that we need to send, or the |
| * guest may ignore the queue since it won't see an updated idx. |
| */ |
| mb(); |
| |
| if (!vq->use_event_idx) { |
| /* |
| * When VIRTIO_RING_F_EVENT_IDX isn't negotiated, interrupt the |
| * guest if it didn't explicitly request to be left alone. |
| */ |
| return !(virtio_guest_to_host_u16(vq, vq->vring.avail->flags) & |
| VRING_AVAIL_F_NO_INTERRUPT); |
| } |
| |
| old_idx = vq->last_used_signalled; |
| new_idx = virtio_guest_to_host_u16(vq, vq->vring.used->idx); |
| event_idx = virtio_guest_to_host_u16(vq, vring_used_event(&vq->vring)); |
| |
| if (vring_need_event(event_idx, new_idx, old_idx)) { |
| vq->last_used_signalled = new_idx; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void virtio_set_guest_features(struct kvm *kvm, struct virtio_device *vdev, |
| void *dev, u32 features) |
| { |
| /* TODO: fail negotiation if features & ~host_features */ |
| |
| vdev->features = features; |
| vdev->ops->set_guest_features(kvm, dev, features); |
| } |
| |
| void virtio_notify_status(struct kvm *kvm, struct virtio_device *vdev, |
| void *dev, u8 status) |
| { |
| u32 ext_status = status; |
| |
| vdev->status &= ~VIRTIO_CONFIG_S_MASK; |
| vdev->status |= status; |
| |
| /* Add a few hints to help devices */ |
| if ((status & VIRTIO_CONFIG_S_DRIVER_OK) && |
| !(vdev->status & VIRTIO__STATUS_START)) { |
| vdev->status |= VIRTIO__STATUS_START; |
| ext_status |= VIRTIO__STATUS_START; |
| |
| } else if (!status && (vdev->status & VIRTIO__STATUS_START)) { |
| vdev->status &= ~VIRTIO__STATUS_START; |
| ext_status |= VIRTIO__STATUS_STOP; |
| |
| /* |
| * Reset virtqueues and stop all traffic now, so that the device |
| * can safely reset the backend in notify_status(). |
| */ |
| if (ext_status & VIRTIO__STATUS_STOP) |
| vdev->ops->reset(kvm, vdev); |
| } |
| |
| if (vdev->ops->notify_status) |
| vdev->ops->notify_status(kvm, dev, ext_status); |
| } |
| |
| int virtio_init(struct kvm *kvm, void *dev, struct virtio_device *vdev, |
| struct virtio_ops *ops, enum virtio_trans trans, |
| int device_id, int subsys_id, int class) |
| { |
| void *virtio; |
| int r; |
| |
| switch (trans) { |
| case VIRTIO_PCI: |
| virtio = calloc(sizeof(struct virtio_pci), 1); |
| if (!virtio) |
| return -ENOMEM; |
| vdev->virtio = virtio; |
| vdev->ops = ops; |
| vdev->ops->signal_vq = virtio_pci__signal_vq; |
| vdev->ops->signal_config = virtio_pci__signal_config; |
| vdev->ops->init = virtio_pci__init; |
| vdev->ops->exit = virtio_pci__exit; |
| vdev->ops->reset = virtio_pci__reset; |
| r = vdev->ops->init(kvm, dev, vdev, device_id, subsys_id, class); |
| break; |
| case VIRTIO_MMIO: |
| virtio = calloc(sizeof(struct virtio_mmio), 1); |
| if (!virtio) |
| return -ENOMEM; |
| vdev->virtio = virtio; |
| vdev->ops = ops; |
| vdev->ops->signal_vq = virtio_mmio_signal_vq; |
| vdev->ops->signal_config = virtio_mmio_signal_config; |
| vdev->ops->init = virtio_mmio_init; |
| vdev->ops->exit = virtio_mmio_exit; |
| vdev->ops->reset = virtio_mmio_reset; |
| r = vdev->ops->init(kvm, dev, vdev, device_id, subsys_id, class); |
| break; |
| default: |
| r = -1; |
| }; |
| |
| return r; |
| } |
| |
| int virtio_compat_add_message(const char *device, const char *config) |
| { |
| int len = 1024; |
| int compat_id; |
| char *title; |
| char *desc; |
| |
| title = malloc(len); |
| if (!title) |
| return -ENOMEM; |
| |
| desc = malloc(len); |
| if (!desc) { |
| free(title); |
| return -ENOMEM; |
| } |
| |
| snprintf(title, len, "%s device was not detected.", device); |
| snprintf(desc, len, "While you have requested a %s device, " |
| "the guest kernel did not initialize it.\n" |
| "\tPlease make sure that the guest kernel was " |
| "compiled with %s=y enabled in .config.", |
| device, config); |
| |
| compat_id = compat__add_message(title, desc); |
| |
| free(desc); |
| free(title); |
| |
| return compat_id; |
| } |