# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2023 MediaTek, BayLibre
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek Sensor Interface MIPI CSI CD-PHY

maintainers:
  - Julien Stephan <jstephan@baylibre.com>
  - Andy Hsieh <andy.hsieh@mediatek.com>

description:
  The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
  receivers. The number of PHYs depends on the SoC model.
  Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
  capable.

properties:
  compatible:
    enum:
      - mediatek,mt8365-csi-rx

  reg:
    maxItems: 1

  num-lanes:
    enum: [2, 3, 4]

  '#phy-cells':
    enum: [0, 1]
    description: |
      If the PHY doesn't support mode selection then #phy-cells must be 0 and
      PHY mode is described using phy-type property.
      If the PHY supports mode selection, then #phy-cells must be 1 and mode
      is set in the PHY cells. Supported modes are:
        - PHY_TYPE_DPHY
        - PHY_TYPE_CPHY
      See include/dt-bindings/phy/phy.h for constants.

  phy-type:
    description:
      If the PHY doesn't support mode selection then this set the operating mode.
      See include/dt-bindings/phy/phy.h for constants.
    const: 10
    $ref: /schemas/types.yaml#/definitions/uint32

required:
  - compatible
  - reg
  - num-lanes
  - '#phy-cells'

additionalProperties: false

examples:
  - |
    #include <dt-bindings/phy/phy.h>
    soc {
      #address-cells = <2>;
      #size-cells = <2>;

      csi0_rx: phy@11c10000 {
        compatible = "mediatek,mt8365-csi-rx";
        reg = <0 0x11c10000 0 0x2000>;
        num-lanes = <2>;
        #phy-cells = <1>;
      };

      csi1_rx: phy@11c12000 {
        compatible = "mediatek,mt8365-csi-rx";
        reg = <0 0x11c12000 0 0x2000>;
        phy-type = <PHY_TYPE_DPHY>;
        num-lanes = <2>;
        #phy-cells = <0>;
      };
    };
...