# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. SDM670 TLMM block

maintainers:
  - Richard Acayan <mailingradian@gmail.com>

description: |
  The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform.

allOf:
  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

properties:
  compatible:
    const: qcom,sdm670-tlmm

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  gpio-reserved-ranges:
    minItems: 1
    maxItems: 75

patternProperties:
  "-state$":
    oneOf:
      - $ref: "#/$defs/qcom-sdm670-tlmm-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-sdm670-tlmm-state"
        additionalProperties: false

$defs:
  qcom-sdm670-tlmm-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.
    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
    unevaluatedProperties: false

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
          oneOf:
            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
            - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
                      sdc2_clk, sdc2_cmd, sdc2_data ]
        minItems: 1
        maxItems: 36

      function:
        description:
          Specify the alternative function to be configured for the specified
          pins.

        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
                atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
                lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
                mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
                pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
                qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
                qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
                sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
                tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
                tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
                vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]

    required:
      - pins

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    pinctrl@3400000 {
        compatible = "qcom,sdm670-tlmm";
        reg = <0x03400000 0x300000>;
        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
        gpio-controller;
        #gpio-cells = <2>;
        interrupt-controller;
        #interrupt-cells = <2>;
        gpio-ranges = <&tlmm 0 0 151>;

        qup-i2c9-state {
            pins = "gpio6", "gpio7";
            function = "qup9";
        };
    };
...