[TG3]: Fix link problem on Dell's onboard 5906.
The bug is caused by code that always set
(TG3_FLAG_USE_MI_INTERRUPT | TG3_FLAG_USE_LINKCHG_REG) on all Dell's
onboard devices. With these 2 flags set, the link status is polled
by tg3_timer() and will only work when the PHY is set up to interrupt
the MAC on link changes. This breaks 5906 because the 5906 PHY does
not support TG3_FLAG_USE_MI_INTERRUPT the same as other PHYs.
For correctness, only Dell's onboard 5701 needs these 2 flags to be
set. This change will fix the 5906 problem and will change other
Dell devices except 5700 and 5701 to use the more efficient
interrupt-driven link changes.
Update version to 3.77.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 023779a..2f31841 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.76"
-#define DRV_MODULE_RELDATE "May 5, 2007"
+#define DRV_MODULE_VERSION "3.77"
+#define DRV_MODULE_RELDATE "May 31, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -10961,6 +10961,7 @@
* upon subsystem IDs.
*/
if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
tp->tg3_flags |= (TG3_FLAG_USE_MI_INTERRUPT |
TG3_FLAG_USE_LINKCHG_REG);
