Staging: add wlan-ng prism2 usb driver

This adds the wlan-ng prism2 USB driver to the drivers/staging tree.

The code was originally written by the linux-wlan-ng team, patched by
some Novell engineers to properly work on newer kernels, and then hacked
into place in order to get it to build properly in a single subdirectory
within the kernel tree by me.

It supports a wide range of older USB prism2 devices, and contains a
80211 stack to support this single driver.

Cc: Christian Zoz <zoz@suse.de>
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Cc: John Linville <linville@tuxdriver.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wlan-ng <solomon@linux-wlan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index fdbdf84..762b471 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -37,4 +37,6 @@
 
 source "drivers/staging/winbond/Kconfig"
 
+source "drivers/staging/wlan-ng/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 9b576c9..5741984 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -7,3 +7,4 @@
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
 obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
+obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig
new file mode 100644
index 0000000..10b1f0f
--- /dev/null
+++ b/drivers/staging/wlan-ng/Kconfig
@@ -0,0 +1,10 @@
+config PRISM2_USB
+	tristate "Prism2.5 USB driver"
+	depends on USB
+	default n
+	---help---
+	  This is the wlan-ng prism 2.5 USB driver for a wide range of
+	  old USB wireless devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called prism2_usb.
diff --git a/drivers/staging/wlan-ng/Makefile b/drivers/staging/wlan-ng/Makefile
new file mode 100644
index 0000000..777b511
--- /dev/null
+++ b/drivers/staging/wlan-ng/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_PRISM2_USB) += prism2_usb.o
+obj-$(CONFIG_PRISM2_USB) += p80211.o
+
+p80211-objs := p80211mod.o \
+		p80211conv.o \
+		p80211req.o \
+		p80211wep.o \
+		p80211wext.o \
+		p80211netdev.o
diff --git a/drivers/staging/wlan-ng/README b/drivers/staging/wlan-ng/README
new file mode 100644
index 0000000..f50e4eb
--- /dev/null
+++ b/drivers/staging/wlan-ng/README
@@ -0,0 +1,8 @@
+TODO:
+	- checkpatch.pl cleanups
+	- sparse warnings
+	- Lindent cleanups
+	- move to use the in-kernel wireless stack
+	- possible enable the pcmcia and pci portions of the driver
+
+Please send all patches to Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/staging/wlan-ng/hfa384x.c b/drivers/staging/wlan-ng/hfa384x.c
new file mode 100644
index 0000000..04df3fd
--- /dev/null
+++ b/drivers/staging/wlan-ng/hfa384x.c
@@ -0,0 +1,4018 @@
+/* src/prism2/driver/hfa384x.c
+*
+* Implements the functions of the Intersil hfa384x MAC
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file implements functions that correspond to the prism2/hfa384x
+* 802.11 MAC hardware and firmware host interface.
+*
+* The functions can be considered to represent several levels of
+* abstraction.  The lowest level functions are simply C-callable wrappers
+* around the register accesses.  The next higher level represents C-callable
+* prism2 API functions that match the Intersil documentation as closely
+* as is reasonable.  The next higher layer implements common sequences
+* of invokations of the API layer (e.g. write to bap, followed by cmd).
+*
+* Common sequences:
+* hfa384x_drvr_xxx	Highest level abstractions provided by the
+*			hfa384x code.  They are driver defined wrappers
+*			for common sequences.  These functions generally
+*			use the services of the lower levels.
+*
+* hfa384x_drvr_xxxconfig  An example of the drvr level abstraction. These
+*			functions are wrappers for the RID get/set
+*			sequence. They 	call copy_[to|from]_bap() and
+*			cmd_access().	These functions operate on the
+*			RIDs and buffers without validation.  The caller
+*			is responsible for that.
+*
+* API wrapper functions:
+* hfa384x_cmd_xxx	functions that provide access to the f/w commands.
+*			The function arguments correspond to each command
+*			argument, even command arguments that get packed
+*			into single registers.  These functions _just_
+*			issue the command by setting the cmd/parm regs
+*			& reading the status/resp regs.  Additional
+*			activities required to fully use a command
+*			(read/write from/to bap, get/set int status etc.)
+*			are implemented separately.  Think of these as
+*			C-callable prism2 commands.
+*
+* Lowest Layer Functions:
+* hfa384x_docmd_xxx	These functions implement the sequence required
+*			to issue any prism2 command.  Primarily used by the
+*			hfa384x_cmd_xxx functions.
+*
+* hfa384x_bap_xxx	BAP read/write access functions.
+*			Note: we usually use BAP0 for non-interrupt context
+*			 and BAP1 for interrupt context.
+*
+* hfa384x_dl_xxx	download related functions.
+*
+* Driver State Issues:
+* Note that there are two pairs of functions that manage the
+* 'initialized' and 'running' states of the hw/MAC combo.  The four
+* functions are create(), destroy(), start(), and stop().  create()
+* sets up the data structures required to support the hfa384x_*
+* functions and destroy() cleans them up.  The start() function gets
+* the actual hardware running and enables the interrupts.  The stop()
+* function shuts the hardware down.  The sequence should be:
+* create()
+*  .
+*  .  Self contained test routines can run here, particularly
+*  .  corereset() and test_hostif().
+*  .
+* start()
+*  .
+*  .  Do interesting things w/ the hardware
+*  .
+* stop()
+* destroy()
+*
+* Note that destroy() can be called without calling stop() first.
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+
+/* System Includes */
+#define WLAN_DBVAR	prism2_debug
+#include "version.h"
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <asm/semaphore.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <linux/list.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#include <linux/tqueue.h>
+#else
+#include <linux/workqueue.h>
+#endif
+
+#if (WLAN_HOSTIF == WLAN_PCMCIA)
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) )
+#include <pcmcia/version.h>
+#endif
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+#endif
+
+#if ((WLAN_HOSTIF == WLAN_PLX) || (WLAN_HOSTIF == WLAN_PCI))
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#endif
+
+#include "wlan_compat.h"
+
+// XXXX #define CMD_IRQ
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211req.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "hfa384x.h"
+#include "prism2mgmt.h"
+
+/*================================================================*/
+/* Local Constants */
+
+static const UINT16 crc16tab[256] =
+{
+	0x0000, 0xc0c1, 0xc181, 0x0140, 0xc301, 0x03c0, 0x0280, 0xc241,
+	0xc601, 0x06c0, 0x0780, 0xc741, 0x0500, 0xc5c1, 0xc481, 0x0440,
+	0xcc01, 0x0cc0, 0x0d80, 0xcd41, 0x0f00, 0xcfc1, 0xce81, 0x0e40,
+	0x0a00, 0xcac1, 0xcb81, 0x0b40, 0xc901, 0x09c0, 0x0880, 0xc841,
+	0xd801, 0x18c0, 0x1980, 0xd941, 0x1b00, 0xdbc1, 0xda81, 0x1a40,
+	0x1e00, 0xdec1, 0xdf81, 0x1f40, 0xdd01, 0x1dc0, 0x1c80, 0xdc41,
+	0x1400, 0xd4c1, 0xd581, 0x1540, 0xd701, 0x17c0, 0x1680, 0xd641,
+	0xd201, 0x12c0, 0x1380, 0xd341, 0x1100, 0xd1c1, 0xd081, 0x1040,
+	0xf001, 0x30c0, 0x3180, 0xf141, 0x3300, 0xf3c1, 0xf281, 0x3240,
+	0x3600, 0xf6c1, 0xf781, 0x3740, 0xf501, 0x35c0, 0x3480, 0xf441,
+	0x3c00, 0xfcc1, 0xfd81, 0x3d40, 0xff01, 0x3fc0, 0x3e80, 0xfe41,
+	0xfa01, 0x3ac0, 0x3b80, 0xfb41, 0x3900, 0xf9c1, 0xf881, 0x3840,
+	0x2800, 0xe8c1, 0xe981, 0x2940, 0xeb01, 0x2bc0, 0x2a80, 0xea41,
+	0xee01, 0x2ec0, 0x2f80, 0xef41, 0x2d00, 0xedc1, 0xec81, 0x2c40,
+	0xe401, 0x24c0, 0x2580, 0xe541, 0x2700, 0xe7c1, 0xe681, 0x2640,
+	0x2200, 0xe2c1, 0xe381, 0x2340, 0xe101, 0x21c0, 0x2080, 0xe041,
+	0xa001, 0x60c0, 0x6180, 0xa141, 0x6300, 0xa3c1, 0xa281, 0x6240,
+	0x6600, 0xa6c1, 0xa781, 0x6740, 0xa501, 0x65c0, 0x6480, 0xa441,
+	0x6c00, 0xacc1, 0xad81, 0x6d40, 0xaf01, 0x6fc0, 0x6e80, 0xae41,
+	0xaa01, 0x6ac0, 0x6b80, 0xab41, 0x6900, 0xa9c1, 0xa881, 0x6840,
+	0x7800, 0xb8c1, 0xb981, 0x7940, 0xbb01, 0x7bc0, 0x7a80, 0xba41,
+	0xbe01, 0x7ec0, 0x7f80, 0xbf41, 0x7d00, 0xbdc1, 0xbc81, 0x7c40,
+	0xb401, 0x74c0, 0x7580, 0xb541, 0x7700, 0xb7c1, 0xb681, 0x7640,
+	0x7200, 0xb2c1, 0xb381, 0x7340, 0xb101, 0x71c0, 0x7080, 0xb041,
+	0x5000, 0x90c1, 0x9181, 0x5140, 0x9301, 0x53c0, 0x5280, 0x9241,
+	0x9601, 0x56c0, 0x5780, 0x9741, 0x5500, 0x95c1, 0x9481, 0x5440,
+	0x9c01, 0x5cc0, 0x5d80, 0x9d41, 0x5f00, 0x9fc1, 0x9e81, 0x5e40,
+	0x5a00, 0x9ac1, 0x9b81, 0x5b40, 0x9901, 0x59c0, 0x5880, 0x9841,
+	0x8801, 0x48c0, 0x4980, 0x8941, 0x4b00, 0x8bc1, 0x8a81, 0x4a40,
+	0x4e00, 0x8ec1, 0x8f81, 0x4f40, 0x8d01, 0x4dc0, 0x4c80, 0x8c41,
+	0x4400, 0x84c1, 0x8581, 0x4540, 0x8701, 0x47c0, 0x4680, 0x8641,
+	0x8201, 0x42c0, 0x4380, 0x8341, 0x4100, 0x81c1, 0x8081, 0x4040
+};
+
+/*================================================================*/
+/* Local Macros */
+
+/*================================================================*/
+/* Local Types */
+
+/*================================================================*/
+/* Local Static Definitions */
+extern int prism2_debug;
+
+/*================================================================*/
+/* Local Function Declarations */
+
+static void	hfa384x_int_dtim(wlandevice_t *wlandev);
+static void	hfa384x_int_infdrop(wlandevice_t *wlandev);
+
+static void     hfa384x_bap_tasklet(unsigned long data);
+
+static void	hfa384x_int_info(wlandevice_t *wlandev);
+static void	hfa384x_int_txexc(wlandevice_t *wlandev);
+static void	hfa384x_int_tx(wlandevice_t *wlandev);
+static void	hfa384x_int_rx(wlandevice_t *wlandev);
+
+#ifdef CMD_IRQ
+static void	hfa384x_int_cmd(wlandevice_t *wlandev);
+#endif
+static void	hfa384x_int_rxmonitor( wlandevice_t *wlandev,
+			UINT16 rxfid, hfa384x_rx_frame_t *rxdesc);
+static void	hfa384x_int_alloc(wlandevice_t *wlandev);
+
+static int hfa384x_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd);
+
+static int hfa384x_dl_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd);
+
+static UINT16
+hfa384x_mkcrc16(UINT8 *p, int len);
+
+int hfa384x_copy_to_bap4(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
+			 void *buf, UINT len, void* buf2, UINT len2,
+			 void *buf3, UINT len3, void* buf4, UINT len4);
+
+/*================================================================*/
+/* Function Definitions */
+
+static UINT16
+txfid_queue_empty(hfa384x_t *hw)
+{
+	return (hw->txfid_head == hw->txfid_tail) ? 1 : 0;
+}
+
+static UINT16
+txfid_queue_remove(hfa384x_t *hw)
+{
+	UINT16 result= 0;
+
+	if (txfid_queue_empty(hw)) {
+		WLAN_LOG_DEBUG(3,"queue empty.\n");
+	} else {
+		result = hw->txfid_queue[hw->txfid_head];
+		hw->txfid_head = (hw->txfid_head + 1) % hw->txfid_N;
+	}
+
+	return (UINT16)result;
+}
+
+static INT16
+txfid_queue_add(hfa384x_t *hw, UINT16 val)
+{
+	INT16 result = 0;
+
+	if (hw->txfid_head == ((hw->txfid_tail + 1) % hw->txfid_N)) {
+		result = -1;
+		WLAN_LOG_DEBUG(3,"queue full.\n");
+	} else {
+		hw->txfid_queue[hw->txfid_tail] = val;
+		result = hw->txfid_tail;
+		hw->txfid_tail = (hw->txfid_tail + 1) % hw->txfid_N;
+	}
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_create
+*
+* Initializes the hfa384x_t data structure for use.  Note this
+* does _not_ intialize the actual hardware, just the data structures
+* we use to keep track of its state.
+*
+* Arguments:
+*	hw		device structure
+*	irq		device irq number
+*	iobase		[pcmcia] i/o base address for register access
+*			[pci] zero
+*			[plx] i/o base address for register access
+*	membase		[pcmcia] pcmcia_cs "link" pointer
+*			[pci] memory base address for register access
+*			[plx] memory base address for card attribute memory
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+void hfa384x_create(hfa384x_t *hw, UINT irq, UINT32 iobase,
+		    UINT8 __iomem *membase)
+{
+	DBFENTER;
+	memset(hw, 0, sizeof(hfa384x_t));
+	hw->irq = irq;
+	hw->iobase = iobase;
+	hw->membase = membase;
+	spin_lock_init(&(hw->cmdlock));
+
+	/* BAP setup */
+ 	spin_lock_init(&(hw->baplock));
+	tasklet_init(&hw->bap_tasklet,
+		     hfa384x_bap_tasklet,
+		     (unsigned long) hw);
+
+	init_waitqueue_head(&hw->cmdq);
+	sema_init(&hw->infofid_sem, 1);
+
+        hw->txfid_head = 0;
+        hw->txfid_tail = 0;
+        hw->txfid_N = HFA384x_DRVR_FIDSTACKLEN_MAX;
+        memset(hw->txfid_queue, 0, sizeof(hw->txfid_queue));
+
+	hw->isram16 = 1;
+
+	/* Init the auth queue head */
+	skb_queue_head_init(&hw->authq);
+
+	INIT_WORK2(&hw->link_bh, prism2sta_processing_defer);
+
+        INIT_WORK2(&hw->commsqual_bh, prism2sta_commsqual_defer);
+
+	init_timer(&hw->commsqual_timer);
+	hw->commsqual_timer.data = (unsigned long) hw;
+	hw->commsqual_timer.function = prism2sta_commsqual_timer;
+
+	hw->link_status = HFA384x_LINK_NOTCONNECTED;
+	hw->state = HFA384x_STATE_INIT;
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_destroy
+*
+* Partner to hfa384x_create().  This function cleans up the hw
+* structure so that it can be freed by the caller using a simple
+* kfree.  Currently, this function is just a placeholder.  If, at some
+* point in the future, an hw in the 'shutdown' state requires a 'deep'
+* kfree, this is where it should be done.  Note that if this function
+* is called on a _running_ hw structure, the drvr_stop() function is
+* called.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	nothing, this function is not allowed to fail.
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+void
+hfa384x_destroy( hfa384x_t *hw)
+{
+	struct sk_buff *skb;
+
+	DBFENTER;
+
+	if ( hw->state == HFA384x_STATE_RUNNING ) {
+		hfa384x_drvr_stop(hw);
+	}
+	hw->state = HFA384x_STATE_PREINIT;
+
+	if (hw->scanresults) {
+		kfree(hw->scanresults);
+		hw->scanresults = NULL;
+	}
+
+        /* Now to clean out the auth queue */
+        while ( (skb = skb_dequeue(&hw->authq)) ) {
+                dev_kfree_skb(skb);
+        }
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_getconfig
+*
+* Performs the sequence necessary to read a config/info item.
+*
+* Arguments:
+*	hw		device structure
+*	rid		config/info record id (host order)
+*	buf		host side record buffer.  Upon return it will
+*			contain the body portion of the record (minus the
+*			RID and len).
+*	len		buffer length (in bytes, should match record length)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*	-ENODATA 	length mismatch between argument and retrieved
+*			record.
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_getconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len)
+{
+	int 		result = 0;
+	DBFENTER;
+
+	result = hfa384x_cmd_access( hw, 0, rid, buf, len);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_setconfig
+*
+* Performs the sequence necessary to write a config/info item.
+*
+* Arguments:
+*	hw		device structure
+*	rid		config/info record id (in host order)
+*	buf		host side record buffer
+*	len		buffer length (in bytes)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_setconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len)
+{
+	int		result = 0;
+	DBFENTER;
+
+	result = hfa384x_cmd_access( hw, 1, rid, buf, len);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_readpda
+*
+* Performs the sequence to read the PDA space.  Note there is no
+* drvr_writepda() function.  Writing a PDA is
+* generally implemented by a calling component via calls to
+* cmd_download and writing to the flash download buffer via the
+* aux regs.
+*
+* Arguments:
+*	hw		device structure
+*	buf		buffer to store PDA in
+*	len		buffer length
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*	-ETIMEOUT	timout waiting for the cmd regs to become
+*			available, or waiting for the control reg
+*			to indicate the Aux port is enabled.
+*	-ENODATA	the buffer does NOT contain a valid PDA.
+*			Either the card PDA is bad, or the auxdata
+*			reads are giving us garbage.
+
+*
+* Side effects:
+*
+* Call context:
+*	process thread or non-card interrupt.
+----------------------------------------------------------------*/
+int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, UINT len)
+{
+	int		result = 0;
+	UINT16		*pda = buf;
+	int		pdaok = 0;
+	int		morepdrs = 1;
+	int		currpdr = 0;	/* word offset of the current pdr */
+	int		i;
+	UINT16		pdrlen;		/* pdr length in bytes, host order */
+	UINT16		pdrcode;	/* pdr code, host order */
+	UINT16		crc;
+	UINT16		pdacrc;
+	struct pdaloc {
+		UINT32	cardaddr;
+		UINT16	auxctl;
+	} pdaloc[] =
+	{
+		{ HFA3842_PDA_BASE,		HFA384x_AUX_CTL_NV},
+		{ HFA3842_PDA_BASE,		HFA384x_AUX_CTL_EXTDS},
+		{ HFA3841_PDA_BASE,		HFA384x_AUX_CTL_NV},
+		{ HFA3841_PDA_BASE,		HFA384x_AUX_CTL_EXTDS},
+		{ HFA3841_PDA_BOGUS_BASE,	HFA384x_AUX_CTL_NV}
+	};
+
+	DBFENTER;
+	/* Check for aux available */
+	result = hfa384x_cmd_aux_enable(hw, 0);
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,"aux_enable() failed. result=%d\n", result);
+		goto failed;
+	}
+
+	/* Read the pda from each known address.  */
+	for ( i = 0; i < (sizeof(pdaloc)/sizeof(pdaloc[0])); i++) {
+		WLAN_LOG_DEBUG( 3, "Checking PDA@(0x%08x,%s)\n",
+			pdaloc[i].cardaddr,
+			pdaloc[i].auxctl == HFA384x_AUX_CTL_NV ?
+			"CTL_NV" : "CTL_EXTDS");
+
+		/* Copy bufsize bytes from our current pdaloc */
+		hfa384x_copy_from_aux(hw,
+			pdaloc[i].cardaddr,
+			pdaloc[i].auxctl,
+			buf,
+			len);
+
+		/* Test for garbage */
+		/* Traverse the PDR list Looking for PDA-END */
+		pdaok = 1;	/* intially assume good */
+		morepdrs = 1;
+		currpdr = 0;
+		while ( pdaok && morepdrs ) {
+			pdrlen = hfa384x2host_16(pda[currpdr]) * 2;
+			pdrcode = hfa384x2host_16(pda[currpdr+1]);
+
+			/* Test for completion at END record */
+			if ( pdrcode == HFA384x_PDR_END_OF_PDA ) {
+				if ( pdrlen == 4 ) {
+					morepdrs = 0;
+					/* Calculate CRC-16 and compare to PDA
+					 * value.  Note the addition of 2 words
+					 * for ENDREC.len and ENDREC.code
+					 * fields.
+					 */
+					crc = hfa384x_mkcrc16( (UINT8*)pda,
+						(currpdr + 2) * sizeof(UINT16));
+					pdacrc =hfa384x2host_16(pda[currpdr+2]);
+					if ( crc != pdacrc ) {
+						WLAN_LOG_DEBUG(3,
+						"PDA crc failed:"
+						"calc_crc=0x%04x,"
+						"pdr_crc=0x%04x.\n",
+						crc, pdacrc);
+						pdaok = 0;
+					}
+				} else {
+					WLAN_LOG_DEBUG(3,
+					"END record detected w/ "
+					"len(%d) != 2, assuming bad PDA\n",
+					pdrlen);
+					pdaok = 0;
+
+				}
+				break;
+			}
+
+			/* Test the record length */
+			if ( pdrlen > HFA384x_PDR_LEN_MAX || pdrlen == 0) {
+				WLAN_LOG_DEBUG(3,
+					"pdrlen for address #%d "
+					"at %#x:%#x:%d\n",
+					i, pdaloc[i].cardaddr,
+					pdaloc[i].auxctl, pdrlen);
+				WLAN_LOG_DEBUG(3,"pdrlen invalid=%d\n",
+					pdrlen);
+				pdaok = 0;
+				break;
+			}
+
+			/* Move to the next pdr */
+			if ( morepdrs ) {
+				/* note the access to pda[], we need words */
+				currpdr += hfa384x2host_16(pda[currpdr]) + 1;
+				if (currpdr*sizeof(UINT16) > len) {
+					WLAN_LOG_DEBUG(3,
+					"Didn't find PDA_END in buffer, "
+					"trying next location.\n");
+					pdaok = 0;
+					break;
+				}
+			}
+		}
+		if ( pdaok ) {
+			WLAN_LOG_INFO(
+				"PDA Read from 0x%08x in %s space.\n",
+				pdaloc[i].cardaddr,
+				pdaloc[i].auxctl == 0 ? "EXTDS" :
+				pdaloc[i].auxctl == 1 ? "NV" :
+				pdaloc[i].auxctl == 2 ? "PHY" :
+				pdaloc[i].auxctl == 3 ? "ICSRAM" :
+				"<bogus auxctl>");
+			break;
+		}
+	}
+	result = pdaok ? 0 : -ENODATA;
+
+	if ( result ) {
+		WLAN_LOG_DEBUG(3,"Failure: pda is not okay\n");
+	}
+
+	hfa384x_cmd_aux_disable(hw);
+failed:
+	DBFEXIT;
+	return result;
+}
+
+
+
+/*----------------------------------------------------------------
+* mkpda_crc
+*
+* Calculates the CRC16 for the given PDA and inserts the value
+* into the end record.
+*
+* Arguments:
+*	pda	ptr to the PDA data structure.
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+static UINT16
+hfa384x_mkcrc16(UINT8 *p, int len)
+{
+	UINT16	crc = 0;
+	UINT8	*lim = p + len;
+
+	while (p < lim) {
+		crc = (crc >> 8 ) ^ crc16tab[(crc & 0xff) ^ *p++];
+	}
+
+	return crc;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_ramdl_enable
+*
+* Begins the ram download state.  Checks to see that we're not
+* already in a download state and that a port isn't enabled.
+* Sets the download state and calls cmd_download with the
+* ENABLE_VOLATILE subcommand and the exeaddr argument.
+*
+* Arguments:
+*	hw		device structure
+*	exeaddr		the card execution address that will be
+*                       jumped to when ramdl_disable() is called
+*			(host order).
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_ramdl_enable(hfa384x_t *hw, UINT32 exeaddr)
+{
+	int		result = 0;
+	UINT16		lowaddr;
+	UINT16		hiaddr;
+	int		i;
+	DBFENTER;
+	/* Check that a port isn't active */
+	for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
+		if ( hw->port_enabled[i] ) {
+			WLAN_LOG_DEBUG(1,"Can't download with a port enabled.\n");
+			result = -EINVAL;
+			goto done;
+		}
+	}
+
+	/* Check that we're not already in a download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
+		WLAN_LOG_DEBUG(1,"Download state not disabled.\n");
+		result = -EINVAL;
+		goto done;
+	}
+
+	/* Are we supposed to go into genesis mode? */
+	if (exeaddr == 0x3f0000) {
+		UINT16 initseq[2] = { 0xe100, 0xffa1 };
+		UINT16 readbuf[2];
+		UINT8 hcr = 0x0f; /* Default to x16 SRAM */
+		hw->isram16 = 1;
+
+		WLAN_LOG_DEBUG(1, "Dropping into Genesis mode\n");
+
+		/* Issue card reset and enable aux port */
+		hfa384x_corereset(hw, prism2_reset_holdtime,
+				  prism2_reset_settletime, 0);
+		hfa384x_cmd_aux_enable(hw, 1);
+
+		/* Genesis set */
+		hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
+				    initseq, sizeof(initseq));
+
+		hfa384x_corereset(hw, prism2_reset_holdtime,
+				  prism2_reset_settletime, hcr);
+
+		/* Validate memory config */
+		hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
+				    initseq, sizeof(initseq));
+		hfa384x_copy_from_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
+				    readbuf, sizeof(initseq));
+		WLAN_HEX_DUMP(3, "readback", readbuf, sizeof(readbuf));
+
+		if (memcmp(initseq, readbuf, sizeof(readbuf))) {
+			hcr = 0x1f; /* x8 SRAM */
+			hw->isram16 = 0;
+
+			hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
+					    initseq, sizeof(initseq));
+			hfa384x_corereset(hw, prism2_reset_holdtime,
+					  prism2_reset_settletime, hcr);
+
+			hfa384x_copy_to_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
+					    initseq, sizeof(initseq));
+			hfa384x_copy_from_aux(hw, 0x7E0038, HFA384x_AUX_CTL_EXTDS,
+					    readbuf, sizeof(initseq));
+			WLAN_HEX_DUMP(2, "readback", readbuf, sizeof(readbuf));
+
+			if (memcmp(initseq, readbuf, sizeof(readbuf))) {
+				WLAN_LOG_ERROR("Genesis mode failed\n");
+				result = -1;
+				goto done;
+			}
+		}
+
+		/* Now we're in genesis mode */
+		hw->dlstate = HFA384x_DLSTATE_GENESIS;
+		goto done;
+	}
+
+	/* Retrieve the buffer loc&size and timeout */
+	if ( (result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DOWNLOADBUFFER,
+				&(hw->bufinfo), sizeof(hw->bufinfo))) ) {
+		goto done;
+	}
+	hw->bufinfo.page = hfa384x2host_16(hw->bufinfo.page);
+	hw->bufinfo.offset = hfa384x2host_16(hw->bufinfo.offset);
+	hw->bufinfo.len = hfa384x2host_16(hw->bufinfo.len);
+	if ( (result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_MAXLOADTIME,
+				&(hw->dltimeout))) ) {
+		goto done;
+	}
+	hw->dltimeout = hfa384x2host_16(hw->dltimeout);
+
+	/* Enable the aux port */
+	if ( (result = hfa384x_cmd_aux_enable(hw, 0)) ) {
+		WLAN_LOG_DEBUG(1,"Aux enable failed, result=%d.\n", result);
+		goto done;
+	}
+
+	/* Call the download(1,addr) function */
+	lowaddr = HFA384x_ADDR_CMD_MKOFF(exeaddr);
+	hiaddr =  HFA384x_ADDR_CMD_MKPAGE(exeaddr);
+
+	result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_RAM,
+			lowaddr, hiaddr, 0);
+	if ( result == 0) {
+		/* Set the download state */
+		hw->dlstate = HFA384x_DLSTATE_RAMENABLED;
+	} else {
+		WLAN_LOG_DEBUG(1,"cmd_download(0x%04x, 0x%04x) failed, result=%d.\n",
+				lowaddr,hiaddr, result);
+		/* Disable  the aux port */
+		hfa384x_cmd_aux_disable(hw);
+	}
+
+ done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_ramdl_disable
+*
+* Ends the ram download state.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_ramdl_disable(hfa384x_t *hw)
+{
+	DBFENTER;
+	/* Check that we're already in the download state */
+	if ( ( hw->dlstate != HFA384x_DLSTATE_RAMENABLED ) &&
+	     ( hw->dlstate != HFA384x_DLSTATE_GENESIS ) ) {
+		return -EINVAL;
+	}
+
+	if (hw->dlstate == HFA384x_DLSTATE_GENESIS) {
+		hfa384x_corereset(hw, prism2_reset_holdtime,
+				  prism2_reset_settletime,
+				  hw->isram16 ? 0x07: 0x17);
+		goto done;
+	}
+
+	/* Disable the aux port */
+	hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0 , 0);
+
+ done:
+	hw->dlstate = HFA384x_DLSTATE_DISABLED;
+	hfa384x_cmd_aux_disable(hw);
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_ramdl_write
+*
+* Performs a RAM download of a chunk of data. First checks to see
+* that we're in the RAM download state, then uses the aux functions
+* to 1) copy the data, 2) readback and compare.  The download
+* state is unaffected.  When all data has been written using
+* this function, call drvr_ramdl_disable() to end the download state
+* and restart the MAC.
+*
+* Arguments:
+*	hw		device structure
+*	daddr		Card address to write to. (host order)
+*	buf		Ptr to data to write.
+*	len		Length of data (host order).
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_ramdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len)
+{
+	int		result = 0;
+	UINT8		*verbuf;
+	DBFENTER;
+	/* Check that we're in the ram download state */
+	if ( ( hw->dlstate != HFA384x_DLSTATE_RAMENABLED ) &&
+	     ( hw->dlstate != HFA384x_DLSTATE_GENESIS ) ) {
+		return -EINVAL;
+	}
+
+	WLAN_LOG_INFO("Writing %d bytes to ram @0x%06x\n", len, daddr);
+#if 0
+WLAN_HEX_DUMP(1, "dldata", buf, len);
+#endif
+	/* Copy the data via the aux port */
+	hfa384x_copy_to_aux(hw, daddr, HFA384x_AUX_CTL_EXTDS, buf, len);
+
+	/* Create a buffer for the verify */
+	verbuf = kmalloc(len, GFP_KERNEL);
+	if (verbuf == NULL ) return 1;
+
+	/* Read back and compare */
+	hfa384x_copy_from_aux(hw, daddr, HFA384x_AUX_CTL_EXTDS, verbuf, len);
+
+	if ( memcmp(buf, verbuf, len) ) {
+		WLAN_LOG_DEBUG(1,"ramdl verify failed!\n");
+		result = -EINVAL;
+	}
+
+	kfree_s(verbuf, len);
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_flashdl_enable
+*
+* Begins the flash download state.  Checks to see that we're not
+* already in a download state and that a port isn't enabled.
+* Sets the download state and retrieves the flash download
+* buffer location, buffer size, and timeout length.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_flashdl_enable(hfa384x_t *hw)
+{
+	int		result = 0;
+	int		i;
+
+	DBFENTER;
+	/* Check that a port isn't active */
+	for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
+		if ( hw->port_enabled[i] ) {
+			WLAN_LOG_DEBUG(1,"called when port enabled.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Check that we're not already in a download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
+		return -EINVAL;
+	}
+
+	/* Retrieve the buffer loc&size and timeout */
+	if ( (result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DOWNLOADBUFFER,
+				&(hw->bufinfo), sizeof(hw->bufinfo))) ) {
+		return result;
+	}
+	hw->bufinfo.page = hfa384x2host_16(hw->bufinfo.page);
+	hw->bufinfo.offset = hfa384x2host_16(hw->bufinfo.offset);
+	hw->bufinfo.len = hfa384x2host_16(hw->bufinfo.len);
+	if ( (result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_MAXLOADTIME,
+				&(hw->dltimeout))) ) {
+		return result;
+	}
+	hw->dltimeout = hfa384x2host_16(hw->dltimeout);
+
+	/* Enable the aux port */
+	if ( (result = hfa384x_cmd_aux_enable(hw, 0)) ) {
+		return result;
+	}
+
+	hw->dlstate = HFA384x_DLSTATE_FLASHENABLED;
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_flashdl_disable
+*
+* Ends the flash download state.  Note that this will cause the MAC
+* firmware to restart.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_flashdl_disable(hfa384x_t *hw)
+{
+	DBFENTER;
+	/* Check that we're already in the download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_FLASHENABLED ) {
+		return -EINVAL;
+	}
+
+	/* There isn't much we can do at this point, so I don't */
+	/*  bother  w/ the return value */
+	hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0 , 0);
+	hw->dlstate = HFA384x_DLSTATE_DISABLED;
+
+	/* Disable the aux port */
+	hfa384x_cmd_aux_disable(hw);
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_flashdl_write
+*
+* Performs a FLASH download of a chunk of data. First checks to see
+* that we're in the FLASH download state, then sets the download
+* mode, uses the aux functions to 1) copy the data to the flash
+* buffer, 2) sets the download 'write flash' mode, 3) readback and
+* compare.  Lather rinse, repeat as many times an necessary to get
+* all the given data into flash.
+* When all data has been written using this function (possibly
+* repeatedly), call drvr_flashdl_disable() to end the download state
+* and restart the MAC.
+*
+* Arguments:
+*	hw		device structure
+*	daddr		Card address to write to. (host order)
+*	buf		Ptr to data to write.
+*	len		Length of data (host order).
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_flashdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len)
+{
+	int		result = 0;
+	UINT8		*verbuf;
+	UINT32		dlbufaddr;
+	UINT32		currlen;
+	UINT32		currdaddr;
+	UINT16		destlo;
+	UINT16		desthi;
+	int		nwrites;
+	int		i;
+
+	DBFENTER;
+	/* Check that we're in the flash download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_FLASHENABLED ) {
+		return -EINVAL;
+	}
+
+	WLAN_LOG_INFO("Download %d bytes to flash @0x%06x\n", len, daddr);
+
+	/* Need a flat address for arithmetic */
+	dlbufaddr = HFA384x_ADDR_AUX_MKFLAT(
+			hw->bufinfo.page,
+			hw->bufinfo.offset);
+	verbuf = kmalloc(hw->bufinfo.len, GFP_KERNEL);
+
+#if 0
+WLAN_LOG_WARNING("dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr, hw->bufinfo.len, hw->dltimeout);
+#endif
+	/* Figure out how many times to to the flash prog */
+	nwrites = len / hw->bufinfo.len;
+	nwrites += (len % hw->bufinfo.len) ? 1 : 0;
+
+	if ( verbuf == NULL ) {
+		WLAN_LOG_ERROR("Failed to allocate flash verify buffer\n");
+		return 1;
+	}
+	/* For each */
+	for ( i = 0; i < nwrites; i++) {
+		/* Get the dest address and len */
+		currlen = (len - (hw->bufinfo.len * i)) > hw->bufinfo.len ?
+				hw->bufinfo.len :
+				(len - (hw->bufinfo.len * i));
+		currdaddr = daddr + (hw->bufinfo.len * i);
+		destlo = HFA384x_ADDR_CMD_MKOFF(currdaddr);
+		desthi = HFA384x_ADDR_CMD_MKPAGE(currdaddr);
+		WLAN_LOG_INFO("Writing %d bytes to flash @0x%06x\n", currlen, currdaddr);
+#if 0
+WLAN_HEX_DUMP(1, "dldata", buf+(hw->bufinfo.len*i), currlen);
+#endif
+		/* Set the download mode */
+		result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NV,
+				destlo, desthi, currlen);
+		if ( result ) {
+			WLAN_LOG_ERROR("download(NV,lo=%x,hi=%x,len=%x) "
+				"cmd failed, result=%d. Aborting d/l\n",
+				destlo, desthi, currlen, result);
+			goto exit_proc;
+		}
+		/* copy the data to the flash buffer */
+		hfa384x_copy_to_aux(hw, dlbufaddr, HFA384x_AUX_CTL_EXTDS,
+					buf+(hw->bufinfo.len*i), currlen);
+		/* set the download 'write flash' mode */
+		result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NVWRITE, 0,0,0);
+		if ( result ) {
+			WLAN_LOG_ERROR(
+				"download(NVWRITE,lo=%x,hi=%x,len=%x) "
+				"cmd failed, result=%d. Aborting d/l\n",
+				destlo, desthi, currlen, result);
+			goto exit_proc;
+		}
+		/* readback and compare, if fail...bail */
+		hfa384x_copy_from_aux(hw,
+				currdaddr, HFA384x_AUX_CTL_NV,
+				verbuf, currlen);
+
+		if ( memcmp(buf+(hw->bufinfo.len*i), verbuf, currlen) ) {
+			return -EINVAL;
+		}
+	}
+
+exit_proc:
+         /* DOH! This kfree's for you Mark :-) My forehead hurts... */
+         kfree(verbuf);
+
+	/* Leave the firmware in the 'post-prog' mode.  flashdl_disable will */
+	/*  actually disable programming mode.  Remember, that will cause the */
+	/*  the firmware to effectively reset itself. */
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_initialize
+*
+* Issues the initialize command and sets the hw->state based
+* on the result.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_initialize(hfa384x_t *hw)
+{
+	int result = 0;
+	int i;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	/* we don't want to be interrupted during the reset */
+	hfa384x_setreg(hw, 0, HFA384x_INTEN);
+	hfa384x_setreg(hw, 0xffff, HFA384x_EVACK);
+
+	cmd.cmd = HFA384x_CMDCODE_INIT;
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	if ( result == 0 ) {
+		for ( i = 0; i < HFA384x_NUMPORTS_MAX; i++) {
+			hw->port_enabled[i] = 0;
+		}
+	}
+
+        hw->link_status = HFA384x_LINK_NOTCONNECTED;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_commtallies
+*
+* Send a commtallies inquiry to the MAC.  Note that this is an async
+* call that will result in an info frame arriving sometime later.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	zero		success.
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_commtallies( hfa384x_t *hw )
+{
+	hfa384x_metacmd_t cmd;
+	int result;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMDCODE_INQ;
+	cmd.parm0 = HFA384x_IT_COMMTALLIES;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_enable
+*
+* Issues the enable command to enable communications on one of
+* the MACs 'ports'.  Only macport 0 is valid  for stations.
+* APs may also enable macports 1-6.  Only ports that are currently
+* disabled may be enabled.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_enable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+
+	DBFENTER;
+	if ((!hw->isap && macport != 0) ||
+	    (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
+	    (hw->port_enabled[macport]) ){
+		result = -EINVAL;
+	} else {
+		result = hfa384x_cmd_enable(hw, macport);
+		if ( result == 0 ) {
+			hw->port_enabled[macport] = 1;
+		}
+	}
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_enable
+*
+* Issues the the enable command to enable communications on one of the
+* MACs 'ports'.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_enable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
+		  HFA384x_CMD_MACPORT_SET(macport);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_disable
+*
+* Issues the disable command to stop communications on one of
+* the MACs 'ports'.  Only macport 0 is valid  for stations.
+* APs may also disable macports 1-6.  Only ports that have been
+* previously enabled may be disabled.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_disable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+
+	DBFENTER;
+	if ((!hw->isap && macport != 0) ||
+	    (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
+	    !(hw->port_enabled[macport]) ){
+		result = -EINVAL;
+	} else {
+		result = hfa384x_cmd_disable(hw, macport);
+		if ( result == 0 ) {
+			hw->port_enabled[macport] = 0;
+		}
+	}
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_disable
+*
+* Issues the command to disable a port.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_disable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
+		  HFA384x_CMD_MACPORT_SET(macport);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_diagnose
+*
+* Issues the diagnose command to test the: register interface,
+* MAC controller (including loopback), External RAM, Non-volatile
+* memory integrity, and synthesizers.  Following execution of this
+* command, MAC/firmware are in the 'initial state'.  Therefore,
+* the Initialize command should be issued after successful
+* completion of this command.  This function may only be called
+* when the MAC is in the 'communication disabled' state.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+#define DIAG_PATTERNA ((UINT16)0xaaaa)
+#define DIAG_PATTERNB ((UINT16)0x5555)
+
+int hfa384x_cmd_diagnose(hfa384x_t *hw)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DIAG);
+	cmd.parm0 = DIAG_PATTERNA;
+	cmd.parm1 = DIAG_PATTERNB;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_allocate
+*
+* Issues the allocate command instructing the firmware to allocate
+* a 'frame structure buffer' in MAC controller RAM.  This command
+* does not provide the result, it only initiates one of the f/w's
+* asynchronous processes to construct the buffer.  When the
+* allocation is complete, it will be indicated via the Alloc
+* bit in the EvStat register and the FID identifying the allocated
+* space will be available from the AllocFID register.  Some care
+* should be taken when waiting for the Alloc event.  If a Tx or
+* Notify command w/ Reclaim has been previously executed, it's
+* possible the first Alloc event after execution of this command
+* will be for the reclaimed buffer and not the one you asked for.
+* This case must be handled in the Alloc event handler.
+*
+* Arguments:
+*	hw		device structure
+*	len		allocation length, must be an even value
+*			in the range [4-2400]. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_allocate(hfa384x_t *hw, UINT16 len)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	if ( (len % 2) ||
+	     len < HFA384x_CMD_ALLOC_LEN_MIN ||
+	     len > HFA384x_CMD_ALLOC_LEN_MAX ) {
+		result = -EINVAL;
+	} else {
+		cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ALLOC);
+		cmd.parm0 = len;
+		cmd.parm1 = 0;
+		cmd.parm2 = 0;
+
+		spin_lock_bh(&hw->cmdlock);
+		result = hfa384x_docmd_wait(hw, &cmd);
+		spin_unlock_bh(&hw->cmdlock);
+	}
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_transmit
+*
+* Instructs the firmware to transmit a frame previously copied
+* to a given buffer.  This function returns immediately, the Tx
+* results are available via the Tx or TxExc events (if the frame
+* control bits are set).  The reclaim argument specifies if the
+* FID passed will be used by the f/w tx process or returned for
+* use w/ another transmit command.  If reclaim is set, expect an
+* Alloc event signalling the availibility of the FID for reuse.
+*
+* NOTE: hw->cmdlock MUST BE HELD before calling this function!
+*
+* Arguments:
+*	hw		device structure
+*	reclaim		[0|1] indicates whether the given FID will
+*			be handed back (via Alloc event) for reuse.
+*			(host order)
+*	qos		[0-3] Value to put in the QoS field of the
+*			tx command, identifies a queue to place the
+*			outgoing frame in.
+*			(host order)
+*	fid		FID of buffer containing the frame that was
+*			previously copied to MAC memory via the bap.
+*			(host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*	hw->resp0 will contain the FID being used by async tx
+*	process.  If reclaim==0, resp0 will be the same as the fid
+*	argument.  If reclaim==1, resp0 will be the different and
+*	is the value to watch for in the Tx|TxExc to indicate completion
+*	of the frame passed in fid.
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_transmit(hfa384x_t *hw, UINT16 reclaim, UINT16 qos, UINT16 fid)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_TX) |
+		HFA384x_CMD_RECL_SET(reclaim) |
+		HFA384x_CMD_QOS_SET(qos);
+	cmd.parm0 = fid;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_clearpersist
+*
+* Instructs the firmware to clear the persistence bit in a given
+* FID.  This has the effect of telling the firmware to drop the
+* persistent frame.  The FID must be one that was previously used
+* to transmit a PRST frame.
+*
+* Arguments:
+*	hw		device structure
+*	fid		FID of the persistent frame (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_clearpersist(hfa384x_t *hw, UINT16 fid)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_CLRPRST);
+	cmd.parm0 = fid;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_notify
+*
+* Sends an info frame to the firmware to alter the behavior
+* of the f/w asynch processes.  Can only be called when the MAC
+* is in the enabled state.
+*
+* Arguments:
+*	hw		device structure
+*	reclaim		[0|1] indicates whether the given FID will
+*			be handed back (via Alloc event) for reuse.
+*			(host order)
+*	fid		FID of buffer containing the frame that was
+*			previously copied to MAC memory via the bap.
+*			(host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*	hw->resp0 will contain the FID being used by async notify
+*	process.  If reclaim==0, resp0 will be the same as the fid
+*	argument.  If reclaim==1, resp0 will be the different.
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_notify(hfa384x_t *hw, UINT16 reclaim, UINT16 fid,
+		       void *buf, UINT16 len)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_NOTIFY) |
+		HFA384x_CMD_RECL_SET(reclaim);
+	cmd.parm0 = fid;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+
+        /* Copy the record to FID */
+        result = hfa384x_copy_to_bap(hw, HFA384x_BAP_PROC, hw->infofid, 0, buf, len);
+        if ( result ) {
+                WLAN_LOG_DEBUG(1,
+			"copy_to_bap(%04x, 0, %d) failed, result=0x%x\n",
+                        hw->infofid, len, result);
+		result = -EIO;
+                goto failed;
+        }
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+ failed:
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+#if 0
+/*----------------------------------------------------------------
+* hfa384x_cmd_inquiry
+*
+* Requests an info frame from the firmware.  The info frame will
+* be delivered asynchronously via the Info event.
+*
+* Arguments:
+*	hw		device structure
+*	fid		FID of the info frame requested. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int hfa384x_cmd_inquiry(hfa384x_t *hw, UINT16 fid)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_INQ);
+	cmd.parm0 = fid;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+#endif
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_access
+*
+* Requests that a given record be copied to/from the record
+* buffer.  If we're writing from the record buffer, the contents
+* must previously have been written to the record buffer via the
+* bap.  If we're reading into the record buffer, the record can
+* be read out of the record buffer after this call.
+*
+* Arguments:
+*	hw		device structure
+*	write		[0|1] copy the record buffer to the given
+*			configuration record. (host order)
+*	rid		RID of the record to read/write. (host order)
+*	buf		host side record buffer.  Upon return it will
+*			contain the body portion of the record (minus the
+*			RID and len).
+*	len		buffer length (in bytes, should match record length)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_access(hfa384x_t *hw, UINT16 write, UINT16 rid,
+		       void* buf, UINT16 len)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+	hfa384x_rec_t	rec;
+
+	DBFENTER;
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
+	/* This should NOT be called in interrupt context! */
+	if (in_irq()) {
+		WLAN_LOG_ERROR("Krap, in Interrupt context!");
+#ifdef WLAN_INCLUDE_DEBUG
+		BUG();
+#endif
+	}
+#endif
+	spin_lock_bh(&hw->cmdlock);
+
+	if (write) {
+		rec.rid = host2hfa384x_16(rid);
+		rec.reclen = host2hfa384x_16((len/2) + 1); /* note conversion to words, +1 for rid field */
+		/* write the record */
+		result = hfa384x_copy_to_bap4( hw, HFA384x_BAP_PROC, rid, 0,
+					       &rec, sizeof(rec),
+					       buf, len,
+					       NULL, 0, NULL, 0);
+		if ( result ) {
+			WLAN_LOG_DEBUG(3,"Failure writing record header+data\n");
+			goto fail;
+		}
+
+	}
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ACCESS) |
+		HFA384x_CMD_WRITE_SET(write);
+	cmd.parm0 = rid;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+	if ( result ) {
+		WLAN_LOG_ERROR("Call to hfa384x_docmd_wait failed (%d %d)\n",
+				result, cmd.result.resp0);
+		goto fail;
+	}
+
+	if (!write) {
+		result = hfa384x_copy_from_bap( hw, HFA384x_BAP_PROC, rid, 0, &rec, sizeof(rec));
+		if ( result ) {
+			WLAN_LOG_DEBUG(3,"Call to hfa384x_copy_from_bap failed\n");
+			goto fail;
+		}
+
+		/* Validate the record length */
+		if ( ((hfa384x2host_16(rec.reclen)-1)*2) != len ) {  /* note body len calculation in bytes */
+			WLAN_LOG_DEBUG(1, "RID len mismatch, rid=0x%04x hlen=%d fwlen=%d\n",
+					rid, len, (hfa384x2host_16(rec.reclen)-1)*2);
+			result = -ENODATA;
+			goto fail;
+		}
+
+		result = hfa384x_copy_from_bap( hw, HFA384x_BAP_PROC, rid, sizeof(rec), buf, len);
+
+	}
+
+ fail:
+	spin_unlock_bh(&hw->cmdlock);
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_monitor
+*
+* Enables the 'monitor mode' of the MAC.  Here's the description of
+* monitor mode that I've received thus far:
+*
+*  "The "monitor mode" of operation is that the MAC passes all
+*  frames for which the PLCP checks are correct. All received
+*  MPDUs are passed to the host with MAC Port = 7, with a
+*  receive status of good, FCS error, or undecryptable. Passing
+*  certain MPDUs is a violation of the 802.11 standard, but useful
+*  for a debugging tool."  Normal communication is not possible
+*  while monitor mode is enabled.
+*
+* Arguments:
+*	hw		device structure
+*	enable		a code (0x0b|0x0f) that enables/disables
+*			monitor mode. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_monitor(hfa384x_t *hw, UINT16 enable)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
+		HFA384x_CMD_AINFO_SET(enable);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_download
+*
+* Sets the controls for the MAC controller code/data download
+* process.  The arguments set the mode and address associated
+* with a download.  Note that the aux registers should be enabled
+* prior to setting one of the download enable modes.
+*
+* Arguments:
+*	hw		device structure
+*	mode		0 - Disable programming and begin code exec
+*			1 - Enable volatile mem programming
+*			2 - Enable non-volatile mem programming
+*			3 - Program non-volatile section from NV download
+*			    buffer.
+*			(host order)
+*	lowaddr
+*	highaddr	For mode 1, sets the high & low order bits of
+*			the "destination address".  This address will be
+*			the execution start address when download is
+*			subsequently disabled.
+*			For mode 2, sets the high & low order bits of
+*			the destination in NV ram.
+*			For modes 0 & 3, should be zero. (host order)
+*			NOTE: these address args are in CMD format
+*	codelen		Length of the data to write in mode 2,
+*			zero otherwise. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_download(hfa384x_t *hw, UINT16 mode, UINT16 lowaddr,
+				UINT16 highaddr, UINT16 codelen)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DOWNLD) |
+		HFA384x_CMD_PROGMODE_SET(mode);
+	cmd.parm0 = lowaddr;
+	cmd.parm1 = highaddr;
+	cmd.parm2 = codelen;
+
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_dl_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_aux_enable
+*
+* Goes through the process of enabling the auxilary port.  This
+* is necessary prior to raw reads/writes to card data space.
+* Direct access to the card data space is only used for downloading
+* code and debugging.
+* Note that a call to this function is required before attempting
+* a download.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_aux_enable(hfa384x_t *hw, int force)
+{
+	int		result = -ETIMEDOUT;
+	unsigned long	flags;
+	UINT32		retries_remaining;
+	UINT16		reg;
+	UINT		auxen_mirror = hw->auxen;
+
+	DBFENTER;
+
+	/* Check for existing enable */
+	if ( hw->auxen ) {
+		hw->auxen++;
+		return 0;
+	}
+
+	/* acquire the lock */
+	spin_lock_irqsave( &(hw->cmdlock), flags);
+	/* wait for cmd register busy bit to clear */
+	retries_remaining = 100000;
+	do {
+		reg = hfa384x_getreg(hw, HFA384x_CMD);
+		udelay(10);
+	}
+	while (HFA384x_CMD_ISBUSY(reg) && --retries_remaining);
+	if (retries_remaining != 0) {
+		/* busy bit clear, it's OK to write to ParamX regs */
+		hfa384x_setreg(hw, HFA384x_AUXPW0,
+			HFA384x_PARAM0);
+		hfa384x_setreg(hw, HFA384x_AUXPW1,
+			HFA384x_PARAM1);
+		hfa384x_setreg(hw, HFA384x_AUXPW2,
+			HFA384x_PARAM2);
+
+		/* Set the aux enable in the Control register */
+		hfa384x_setreg(hw, HFA384x_CONTROL_AUX_DOENABLE,
+			HFA384x_CONTROL);
+
+		/* Now wait for completion */
+		retries_remaining = 100000;
+		do {
+			reg = hfa384x_getreg(hw, HFA384x_CONTROL);
+			udelay(10);
+		}
+		while ( ((reg & (BIT14|BIT15)) != HFA384x_CONTROL_AUX_ISENABLED) &&
+			--retries_remaining );
+		if (retries_remaining != 0) {
+			result = 0;
+			hw->auxen++;
+		}
+	}
+
+	/* Force it enabled even if the command failed, if told.. */
+	if ((hw->auxen == auxen_mirror) && force)
+		hw->auxen++;
+
+	spin_unlock_irqrestore( &(hw->cmdlock), flags);
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_aux_disable
+*
+* Goes through the process of disabling the auxilary port
+* enabled with aux_enable().
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_cmd_aux_disable(hfa384x_t *hw)
+{
+	int		result = -ETIMEDOUT;
+	unsigned long   timeout;
+	UINT16		reg = 0;
+
+	DBFENTER;
+
+	/* See if there's more than one enable */
+	if (hw->auxen) hw->auxen--;
+	if (hw->auxen) return 0;
+
+	/* Clear the aux enable in the Control register */
+	hfa384x_setreg(hw, 0, HFA384x_PARAM0);
+	hfa384x_setreg(hw, 0, HFA384x_PARAM1);
+	hfa384x_setreg(hw, 0, HFA384x_PARAM2);
+	hfa384x_setreg(hw, HFA384x_CONTROL_AUX_DODISABLE,
+		HFA384x_CONTROL);
+
+	/* Now wait for completion */
+	timeout = jiffies + 1*HZ;
+	reg = hfa384x_getreg(hw, HFA384x_CONTROL);
+	while ( ((reg & (BIT14|BIT15)) != HFA384x_CONTROL_AUX_ISDISABLED) &&
+		time_before(jiffies,timeout) ){
+		udelay(10);
+		reg = hfa384x_getreg(hw, HFA384x_CONTROL);
+	}
+	if ((reg & (BIT14|BIT15)) == HFA384x_CONTROL_AUX_ISDISABLED ) {
+		result = 0;
+	}
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_low_level
+*
+* Write test commands to the card.  Some test commands don't make
+* sense without prior set-up.  For example, continous TX isn't very
+* useful until you set the channel.  That functionality should be
+*
+* Side effects:
+*
+* Call context:
+*      process thread
+* -----------------------------------------------------------------*/
+int hfa384x_drvr_low_level(hfa384x_t *hw, hfa384x_metacmd_t *cmd)
+{
+	int             result = 0;
+	DBFENTER;
+
+	/* Do i need a host2hfa... conversion ? */
+#if 0
+	printk(KERN_INFO "%#x %#x %#x %#x\n", cmd->cmd, cmd->parm0, cmd->parm1, cmd->parm2);
+#endif
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/* TODO: determine if these will ever be needed */
+#if 0
+int hfa384x_cmd_readmif(hfa384x_t *hw)
+{
+	DBFENTER;
+	DBFEXIT;
+	return 0;
+}
+
+
+int hfa384x_cmd_writemif(hfa384x_t *hw)
+{
+	DBFENTER;
+	DBFEXIT;
+	return 0;
+}
+#endif
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_mmi_read
+*
+* Read mmi registers.  mmi is intersil-speak for the baseband
+* processor registers.
+*
+* Arguments:
+*       hw              device structure
+*       register        The test register to be accessed (must be even #).
+*
+* Returns:
+*       0               success
+*       >0              f/w reported error - f/w status code
+*       <0              driver reported error
+*
+* Side effects:
+*
+* Call context:
+*       process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_mmi_read(hfa384x_t *hw, UINT32 addr, UINT32 *resp)
+{
+        int             result = 0;
+	hfa384x_metacmd_t cmd;
+
+        DBFENTER;
+	cmd.cmd = (UINT16) 0x30;
+	cmd.parm0 = (UINT16) addr;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+        /* Do i need a host2hfa... conversion ? */
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+	*resp = (UINT32) cmd.result.resp0;
+
+        DBFEXIT;
+        return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_mmi_write
+*
+* Read mmi registers.  mmi is intersil-speak for the baseband
+* processor registers.
+*
+* Arguments:
+*       hw              device structure
+*       addr            The test register to be accessed (must be even #).
+*       data            The data value to write to the register.
+*
+* Returns:
+*       0               success
+*       >0              f/w reported error - f/w status code
+*       <0              driver reported error
+*
+* Side effects:
+*
+* Call context:
+*       process thread
+----------------------------------------------------------------*/
+
+int
+hfa384x_drvr_mmi_write(hfa384x_t *hw, UINT32 addr, UINT32 data)
+{
+        int             result = 0;
+	hfa384x_metacmd_t cmd;
+
+        DBFENTER;
+	cmd.cmd = (UINT16) 0x31;
+	cmd.parm0 = (UINT16) addr;
+	cmd.parm1 = (UINT16) data;
+	cmd.parm2 = 0;
+
+        WLAN_LOG_DEBUG(1,"mmi write : addr = 0x%08x\n", addr);
+        WLAN_LOG_DEBUG(1,"mmi write : data = 0x%08x\n", data);
+
+        /* Do i need a host2hfa... conversion ? */
+	spin_lock_bh(&hw->cmdlock);
+	result = hfa384x_docmd_wait(hw, &cmd);
+	spin_unlock_bh(&hw->cmdlock);
+
+        DBFEXIT;
+        return result;
+}
+
+
+/* TODO: determine if these will ever be needed */
+#if 0
+int hfa384x_cmd_readmif(hfa384x_t *hw)
+{
+        DBFENTER;
+        DBFEXIT;
+        return 0;
+}
+
+
+int hfa384x_cmd_writemif(hfa384x_t *hw)
+{
+        DBFENTER;
+        DBFEXIT;
+        return 0;
+}
+#endif
+
+
+
+/*----------------------------------------------------------------
+* hfa384x_copy_from_bap
+*
+* Copies a collection of bytes from the MAC controller memory via
+* one set of BAP registers.
+*
+* Arguments:
+*	hw		device structure
+*	bap		[0|1] which BAP to use
+*	id		FID or RID, destined for the select register (host order)
+*	offset		An _even_ offset into the buffer for the given
+*			FID/RID.  We haven't the means to validate this,
+*			so be careful. (host order)
+*	buf		ptr to array of bytes
+*	len		length of data to transfer in bytes
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - value of offset reg.
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+*	interrupt
+----------------------------------------------------------------*/
+int hfa384x_copy_from_bap(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
+				void *buf, UINT len)
+{
+	int		result = 0;
+	unsigned long	flags = 0;
+	UINT8		*d = (UINT8*)buf;
+	UINT		selectreg;
+	UINT		offsetreg;
+	UINT		datareg;
+	UINT		i;
+	UINT16		reg = 0;
+
+	DBFENTER;
+
+	/* Validate bap, offset, buf, and len */
+	if ( (bap > 1) ||
+	     (offset > HFA384x_BAP_OFFSET_MAX) ||
+	     (offset % 2) ||
+	     (buf == NULL) ||
+	     (len > HFA384x_BAP_DATALEN_MAX) ){
+	     	result = -EINVAL;
+	} else {
+		selectreg = (bap == 1) ?  HFA384x_SELECT1 : HFA384x_SELECT0 ;
+		offsetreg = (bap == 1) ?  HFA384x_OFFSET1 : HFA384x_OFFSET0 ;
+		datareg =   (bap == 1) ?  HFA384x_DATA1 : HFA384x_DATA0 ;
+
+		/* Obtain lock */
+		spin_lock_irqsave( &(hw->baplock), flags);
+
+		/* Write id to select reg */
+		hfa384x_setreg(hw, id, selectreg);
+		/* Write offset to offset reg */
+		hfa384x_setreg(hw, offset, offsetreg);
+		/* Wait for offset[busy] to clear (see BAP_TIMEOUT) */
+		i = 0;
+		do {
+			reg = hfa384x_getreg(hw, offsetreg);
+			if ( i > 0 ) udelay(10);
+			i++;
+		} while ( i < prism2_bap_timeout && HFA384x_OFFSET_ISBUSY(reg));
+#if (WLAN_HOSTIF != WLAN_PCI)
+		/* Release lock */
+		spin_unlock_irqrestore( &(hw->baplock), flags);
+#endif
+
+		if ( HFA384x_OFFSET_ISBUSY(reg) ){
+			/* If timeout, return -ETIMEDOUT */
+			result = reg;
+		} else if ( HFA384x_OFFSET_ISERR(reg) ){
+			/* If offset[err] == 1, return -EINVAL */
+			result = reg;
+		} else {
+			/* Read even(len) buf contents from data reg */
+			for ( i = 0; i < (len & 0xfffe); i+=2 ) {
+				*(UINT16*)(&(d[i])) =
+					hfa384x_getreg_noswap(hw, datareg);
+			}
+			/* If len odd, handle last byte */
+			if ( len % 2 ){
+				reg = hfa384x_getreg_noswap(hw, datareg);
+				d[len-1] = ((UINT8*)(&reg))[0];
+			}
+		}
+
+		/* According to Intersil errata dated 9/16/02:
+
+		"In PRISM PCI MAC host interface, if both BAPs are concurrently
+		 requesing memory access, both will accept the Ack.   There is no
+		 firmware workaround possible.  To prevent BAP access failures or
+		 hang conditions the host MUST NOT access both BAPs in sucession
+		 unless at least 5us elapses between accesses.  The safest choice
+		 is to USE ONLY ONE BAP for all data movement operations."
+
+		 What this means:
+
+		 We have to serialize ALL BAP accesses, and furthermore, add a 5us
+		 delay after access if we're using a PCI platform.
+
+		 Unfortunately, this means we have to lock out interrupts througout
+		 the entire BAP copy.
+
+		 It remains to be seen if "BAP access" means "BAP setup" or the more
+		 literal definition of "copying data back and forth"  I'm erring for
+		 the latter, safer definition.  -- SLP.
+
+		*/
+
+#if (WLAN_HOSTIF == WLAN_PCI)
+		udelay(5);
+		/* Release lock */
+		spin_unlock_irqrestore( &(hw->baplock), flags);
+#endif
+
+	}
+
+	if (result) {
+	  WLAN_LOG_DEBUG(1,
+			  "copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
+			  reg, len, result);
+	}
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_copy_to_bap
+*
+* Copies a collection of bytes to the MAC controller memory via
+* one set of BAP registers.
+*
+* Arguments:
+*	hw		device structure
+*	bap		[0|1] which BAP to use
+*	id		FID or RID, destined for the select register (host order)
+*	offset		An _even_ offset into the buffer for the given
+*			FID/RID.  We haven't the means to validate this,
+*			so be careful. (host order)
+*	buf		ptr to array of bytes
+*	len		length of data to transfer (in bytes)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - value of offset reg.
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+*	interrupt
+----------------------------------------------------------------*/
+int hfa384x_copy_to_bap(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
+				void *buf, UINT len)
+{
+	return hfa384x_copy_to_bap4(hw, bap, id, offset, buf, len, NULL, 0, NULL, 0, NULL, 0);
+}
+
+int hfa384x_copy_to_bap4(hfa384x_t *hw, UINT16 bap, UINT16 id, UINT16 offset,
+			 void *buf, UINT len1, void* buf2, UINT len2,
+			 void *buf3, UINT len3, void *buf4, UINT len4)
+{
+	int		result = 0;
+	unsigned long	flags = 0;
+	UINT8		*d;
+	UINT		selectreg;
+	UINT		offsetreg;
+	UINT		datareg;
+	UINT		i;
+	UINT16		reg;
+
+	DBFENTER;
+
+//	printk(KERN_DEBUG "ctb1 %d id %04x o %d %d %d %d %d\n", bap, id, offset, len1, len2, len3, len4);
+
+	/* Validate bap, offset, buf, and len */
+	if ( (bap > 1) ||
+	     (offset > HFA384x_BAP_OFFSET_MAX) ||
+	     (offset % 2) ||
+	     (buf == NULL) ||
+	     (len1+len2+len3+len4 > HFA384x_BAP_DATALEN_MAX) ){
+	     	result = -EINVAL;
+	} else {
+		selectreg = (bap == 1) ? HFA384x_SELECT1 : HFA384x_SELECT0;
+		offsetreg = (bap == 1) ? HFA384x_OFFSET1 : HFA384x_OFFSET0;
+		datareg =   (bap == 1) ? HFA384x_DATA1   : HFA384x_DATA0;
+		/* Obtain lock */
+		spin_lock_irqsave( &(hw->baplock), flags);
+
+		/* Write id to select reg */
+		hfa384x_setreg(hw, id, selectreg);
+		udelay(10);
+		/* Write offset to offset reg */
+		hfa384x_setreg(hw, offset, offsetreg);
+		/* Wait for offset[busy] to clear (see BAP_TIMEOUT) */
+		i = 0;
+		do {
+			reg = hfa384x_getreg(hw, offsetreg);
+			if ( i > 0 ) udelay(10);
+			i++;
+		} while ( i < prism2_bap_timeout && HFA384x_OFFSET_ISBUSY(reg));
+
+#if (WLAN_HOSTIF != WLAN_PCI)
+		/* Release lock */
+		spin_unlock_irqrestore( &(hw->baplock), flags);
+#endif
+
+		if ( HFA384x_OFFSET_ISBUSY(reg) ){
+			/* If timeout, return reg */
+			result = reg;
+		} else if ( HFA384x_OFFSET_ISERR(reg) ){
+			/* If offset[err] == 1, return reg */
+			result = reg;
+		} else {
+			d = (UINT8*)buf;
+			/* Write even(len1) buf contents to data reg */
+			for ( i = 0; i < (len1 & 0xfffe); i+=2 ) {
+				hfa384x_setreg_noswap(hw,
+					*(UINT16*)(&(d[i])), datareg);
+			}
+			if (len1 & 1) {
+				UINT16 data;
+				UINT8 *b = (UINT8 *) &data;
+				b[0] = d[len1-1];
+				if (buf2 != NULL) {
+					d = (UINT8*)buf2;
+					b[1] = d[0];
+					len2--;
+					buf2++;
+				}
+				hfa384x_setreg_noswap(hw, data, datareg);
+			}
+			if ((buf2 != NULL) && (len2 > 0)) {
+				/* Write even(len2) buf contents to data reg */
+				d = (UINT8*)buf2;
+				for ( i = 0; i < (len2 & 0xfffe); i+=2 ) {
+					hfa384x_setreg_noswap(hw, *(UINT16*)(&(d[i])), datareg);
+				}
+				if (len2 & 1) {
+					UINT16 data;
+					UINT8 *b = (UINT8 *) &data;
+					b[0] = d[len2-1];
+					if (buf3 != NULL) {
+						d = (UINT8*)buf3;
+						b[1] = d[0];
+						len3--;
+						buf3++;
+					}
+					hfa384x_setreg_noswap(hw, data, datareg);
+				}
+			}
+
+			if ((buf3 != NULL) && (len3 > 0)) {
+				/* Write even(len3) buf contents to data reg */
+				d = (UINT8*)buf3;
+				for ( i = 0; i < (len3 & 0xfffe); i+=2 ) {
+					hfa384x_setreg_noswap(hw, *(UINT16*)(&(d[i])), datareg);
+				}
+				if (len3 & 1) {
+					UINT16 data;
+					UINT8 *b = (UINT8 *) &data;
+					b[0] = d[len3-1];
+					if (buf4 != NULL) {
+						d = (UINT8*)buf4;
+						b[1] = d[0];
+						len4--;
+						buf4++;
+					}
+					hfa384x_setreg_noswap(hw, data, datareg);
+				}
+			}
+			if ((buf4 != NULL) && (len4 > 0)) {
+				/* Write even(len4) buf contents to data reg */
+				d = (UINT8*)buf4;
+				for ( i = 0; i < (len4 & 0xfffe); i+=2 ) {
+					hfa384x_setreg_noswap(hw, *(UINT16*)(&(d[i])), datareg);
+				}
+				if (len4 & 1) {
+					UINT16 data;
+					UINT8 *b = (UINT8 *) &data;
+					b[0] = d[len4-1];
+					b[1] = 0;
+
+					hfa384x_setreg_noswap(hw, data, datareg);
+				}
+			}
+//			printk(KERN_DEBUG "ctb2 %d id %04x o %d %d %d %d %d\n", bap, id, offset, len1, len2, len3, len4);
+
+		}
+
+#if (WLAN_HOSTIF == WLAN_PCI)
+		udelay(5);
+		/* Release lock */
+		spin_unlock_irqrestore( &(hw->baplock), flags);
+#endif
+
+	}
+
+	if (result)
+		WLAN_LOG_ERROR("copy_to_bap() failed.\n");
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_copy_from_aux
+*
+* Copies a collection of bytes from the controller memory.  The
+* Auxiliary port MUST be enabled prior to calling this function.
+* We _might_ be in a download state.
+*
+* Arguments:
+*	hw		device structure
+*	cardaddr	address in hfa384x data space to read
+*	auxctl		address space select
+*	buf		ptr to destination host buffer
+*	len		length of data to transfer (in bytes)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	buf contains the data copied
+*
+* Call context:
+*	process thread
+*	interrupt
+----------------------------------------------------------------*/
+void
+hfa384x_copy_from_aux(
+	hfa384x_t *hw, UINT32 cardaddr, UINT32 auxctl, void *buf, UINT len)
+{
+	UINT16		currpage;
+	UINT16		curroffset;
+	UINT		i = 0;
+
+	DBFENTER;
+
+	if ( !(hw->auxen) ) {
+		WLAN_LOG_DEBUG(1,
+			"Attempt to read 0x%04x when aux not enabled\n",
+			cardaddr);
+		return;
+
+	}
+	/* Build appropriate aux page and offset */
+	currpage = HFA384x_AUX_MKPAGE(cardaddr);
+	curroffset = HFA384x_AUX_MKOFF(cardaddr, auxctl);
+	hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
+	hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
+	udelay(5);	/* beat */
+
+	/* read the data */
+	while ( i < len) {
+		*((UINT16*)(buf+i)) = hfa384x_getreg_noswap(hw, HFA384x_AUXDATA);
+		i+=2;
+		curroffset+=2;
+		if ( (curroffset&HFA384x_ADDR_AUX_OFF_MASK) >
+			HFA384x_ADDR_AUX_OFF_MAX ) {
+			currpage++;
+			curroffset = 0;
+			curroffset = HFA384x_AUX_MKOFF(curroffset, auxctl);
+			hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
+			hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
+			udelay(5);	/* beat */
+		}
+	}
+	/* Make sure the auxctl bits are clear */
+	hfa384x_setreg(hw, 0, HFA384x_AUXOFFSET);
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_copy_to_aux
+*
+* Copies a collection of bytes to the controller memory.  The
+* Auxiliary port MUST be enabled prior to calling this function.
+* We _might_ be in a download state.
+*
+* Arguments:
+*	hw		device structure
+*	cardaddr	address in hfa384x data space to read
+*	auxctl		address space select
+*	buf		ptr to destination host buffer
+*	len		length of data to transfer (in bytes)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	Controller memory now contains a copy of buf
+*
+* Call context:
+*	process thread
+*	interrupt
+----------------------------------------------------------------*/
+void
+hfa384x_copy_to_aux(
+	hfa384x_t *hw, UINT32 cardaddr, UINT32 auxctl, void *buf, UINT len)
+{
+	UINT16		currpage;
+	UINT16		curroffset;
+	UINT		i = 0;
+
+	DBFENTER;
+
+	if ( !(hw->auxen) ) {
+		WLAN_LOG_DEBUG(1,
+			"Attempt to read 0x%04x when aux not enabled\n",
+			cardaddr);
+		return;
+
+	}
+	/* Build appropriate aux page and offset */
+	currpage = HFA384x_AUX_MKPAGE(cardaddr);
+	curroffset = HFA384x_AUX_MKOFF(cardaddr, auxctl);
+	hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
+	hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
+	udelay(5);	/* beat */
+
+	/* write the data */
+	while ( i < len) {
+		hfa384x_setreg_noswap(hw,
+			*((UINT16*)(buf+i)), HFA384x_AUXDATA);
+		i+=2;
+		curroffset+=2;
+		if ( curroffset > HFA384x_ADDR_AUX_OFF_MAX ) {
+			currpage++;
+			curroffset = 0;
+			hfa384x_setreg(hw, currpage, HFA384x_AUXPAGE);
+			hfa384x_setreg(hw, curroffset, HFA384x_AUXOFFSET);
+			udelay(5);	/* beat */
+		}
+	}
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_wait
+*
+* Waits for availability of the Command register, then
+* issues the given command.  Then polls the Evstat register
+* waiting for command completion.  Timeouts shouldn't be
+* possible since we're preventing overlapping commands and all
+* commands should be cleared and acknowledged.
+*
+* Arguments:
+*	wlandev		device structure
+*       cmd             cmd structure.  Includes all arguments and result
+*                       data points.  All in host order.
+*
+* Returns:
+*	0		success
+*	-ETIMEDOUT	timed out waiting for register ready or
+*			command completion
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int hfa384x_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd)
+{
+	int		result = -ETIMEDOUT;
+	UINT16		reg = 0;
+	UINT16          counter;
+
+	DBFENTER;
+
+	hw->cmdflag = 0;
+	hw->cmddata = cmd;
+
+	/* wait for the busy bit to clear */
+	counter = 0;
+	reg = hfa384x_getreg(hw, HFA384x_CMD);
+	while ( HFA384x_CMD_ISBUSY(reg) &&
+		(counter < 10)) {
+		reg = hfa384x_getreg(hw, HFA384x_CMD);
+		counter++;
+		udelay(10);
+	}
+
+	if (HFA384x_CMD_ISBUSY(reg)) {
+		WLAN_LOG_ERROR("hfa384x_cmd timeout(1), reg=0x%0hx.\n", reg);
+		goto failed;
+	}
+	if (!HFA384x_CMD_ISBUSY(reg)) {
+		/* busy bit clear, write command */
+		hfa384x_setreg(hw, cmd->parm0, HFA384x_PARAM0);
+		hfa384x_setreg(hw, cmd->parm1, HFA384x_PARAM1);
+		hfa384x_setreg(hw, cmd->parm2, HFA384x_PARAM2);
+		hfa384x_setreg(hw, cmd->cmd, HFA384x_CMD);
+
+#ifdef CMD_IRQ
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,0))
+		while (! hw->cmdflag)
+			interruptible_sleep_on(&hw->cmdq);
+#else
+		wait_event_interruptible(hw->cmdq, hw->cmdflag);
+#endif
+		result = HFA384x_STATUS_RESULT_GET(cmd->status);
+#else // CMD_IRQ
+		/* Now wait for completion */
+		counter = 0;
+		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+		/* Initialization is the problem.  It takes about
+                   100ms. "normal" commands are typically is about
+                   200-400 us (I've never seen less than 200).  Longer
+                   is better so that we're not hammering the bus. */
+		while ( !HFA384x_EVSTAT_ISCMD(reg) &&
+			(counter < 5000)) {
+			reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+			counter++;
+			udelay(200);
+		}
+
+		if ( HFA384x_EVSTAT_ISCMD(reg) ) {
+			result = 0;
+			cmd->result.status = hfa384x_getreg(hw, HFA384x_STATUS);
+			cmd->result.resp0 = hfa384x_getreg(hw, HFA384x_RESP0);
+			cmd->result.resp1 = hfa384x_getreg(hw, HFA384x_RESP1);
+			cmd->result.resp2 = hfa384x_getreg(hw, HFA384x_RESP2);
+			hfa384x_setreg(hw, HFA384x_EVACK_CMD,
+				HFA384x_EVACK);
+			result = HFA384x_STATUS_RESULT_GET(cmd->result.status);
+		} else {
+			WLAN_LOG_ERROR("hfa384x_cmd timeout(2), reg=0x%0hx.\n", reg);
+		}
+#endif  /* CMD_IRQ */
+	}
+
+ failed:
+	hw->cmdflag = 0;
+	hw->cmddata = NULL;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_dl_docmd_wait
+*
+* Waits for availability of the Command register, then
+* issues the given command.  Then polls the Evstat register
+* waiting for command completion.  Timeouts shouldn't be
+* possible since we're preventing overlapping commands and all
+* commands should be cleared and acknowledged.
+*
+* This routine is only used for downloads.  Since it doesn't lock out
+* interrupts the system response is much better.
+*
+* Arguments:
+*	wlandev		device structure
+*       cmd             cmd structure.  Includes all arguments and result
+*                       data points.  All in host order.
+*
+* Returns:
+*	0		success
+*	-ETIMEDOUT	timed out waiting for register ready or
+*			command completion
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int hfa384x_dl_docmd_wait( hfa384x_t *hw, hfa384x_metacmd_t *cmd)
+{
+	int		result = -ETIMEDOUT;
+	unsigned long	timeout;
+	UINT16		reg = 0;
+
+	DBFENTER;
+	/* wait for the busy bit to clear */
+	timeout = jiffies + 1*HZ;
+	reg = hfa384x_getreg(hw, HFA384x_CMD);
+	while ( HFA384x_CMD_ISBUSY(reg) && time_before( jiffies, timeout) ) {
+		reg = hfa384x_getreg(hw, HFA384x_CMD);
+		udelay(10);
+	}
+	if (HFA384x_CMD_ISBUSY(reg)) {
+		WLAN_LOG_WARNING("Timed out waiting for cmd register.\n");
+		goto failed;
+	}
+
+	if (!HFA384x_CMD_ISBUSY(reg)) {
+		/* busy bit clear, write command */
+		hfa384x_setreg(hw, cmd->parm0, HFA384x_PARAM0);
+		hfa384x_setreg(hw, cmd->parm1, HFA384x_PARAM1);
+		hfa384x_setreg(hw, cmd->parm2, HFA384x_PARAM2);
+		hfa384x_setreg(hw, cmd->cmd, HFA384x_CMD);
+
+		/* Now wait for completion */
+		if ( (HFA384x_CMD_CMDCODE_GET(cmd->cmd) == HFA384x_CMDCODE_DOWNLD) ) {
+			/* dltimeout is in ms */
+			timeout = (((UINT32)hw->dltimeout) / 1000UL) * HZ;
+			if ( timeout > 0 ) {
+				timeout += jiffies;
+			} else {
+				timeout = jiffies + 1*HZ;
+			}
+		} else {
+			timeout = jiffies + 1*HZ;
+		}
+		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+		while ( !HFA384x_EVSTAT_ISCMD(reg) && time_before(jiffies,timeout) ) {
+			udelay(100);
+			reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+		}
+		if ( HFA384x_EVSTAT_ISCMD(reg) ) {
+			result = 0;
+			cmd->result.status = hfa384x_getreg(hw, HFA384x_STATUS);
+			cmd->result.resp0 = hfa384x_getreg(hw, HFA384x_RESP0);
+			cmd->result.resp1 = hfa384x_getreg(hw, HFA384x_RESP1);
+			cmd->result.resp2 = hfa384x_getreg(hw, HFA384x_RESP2);
+			hfa384x_setreg(hw, HFA384x_EVACK_CMD, HFA384x_EVACK);
+			result = HFA384x_STATUS_RESULT_GET(cmd->result.status);
+		}
+	}
+
+failed:
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_start
+*
+* Issues the MAC initialize command, sets up some data structures,
+* and enables the interrupts.  After this function completes, the
+* low-level stuff should be ready for any/all commands.
+*
+* Arguments:
+*	hw		device structure
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_start(hfa384x_t *hw)
+{
+	int	result = 0;
+	UINT16			reg;
+	int			i;
+	int			j;
+	DBFENTER;
+
+	/* call initialize */
+	result = hfa384x_cmd_initialize(hw);
+	if (result != 0) {
+		WLAN_LOG_ERROR("Initialize command failed.\n");
+		goto failed;
+	}
+
+	/* make sure interrupts are disabled and any layabout events cleared */
+	hfa384x_setreg(hw, 0, HFA384x_INTEN);
+	hfa384x_setreg(hw, 0xffff, HFA384x_EVACK);
+
+        hw->txfid_head = 0;
+        hw->txfid_tail = 0;
+        hw->txfid_N = HFA384x_DRVR_FIDSTACKLEN_MAX;
+        memset(hw->txfid_queue, 0, sizeof(hw->txfid_queue));
+
+	/* Allocate tx and notify FIDs */
+	/* First, tx */
+	for ( i = 0; i < HFA384x_DRVR_FIDSTACKLEN_MAX-1; i++) {
+		result = hfa384x_cmd_allocate(hw, HFA384x_DRVR_TXBUF_MAX);
+		if (result != 0) {
+			WLAN_LOG_ERROR("Allocate(tx) command failed.\n");
+			goto failed;
+		}
+		j = 0;
+		do {
+			reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+			udelay(10);
+			j++;
+		} while ( !HFA384x_EVSTAT_ISALLOC(reg) && j < 50); /* 50 is timeout */
+		if ( j >= 50 ) {
+			WLAN_LOG_ERROR("Timed out waiting for evalloc(tx).\n");
+			result = -ETIMEDOUT;
+			goto failed;
+		}
+		reg = hfa384x_getreg(hw, HFA384x_ALLOCFID);
+
+		txfid_queue_add(hw, reg);
+
+		WLAN_LOG_DEBUG(4,"hw->txfid_queue[%d]=0x%04x\n",i,reg);
+
+		reg = HFA384x_EVACK_ALLOC_SET(1);
+		hfa384x_setreg(hw, reg, HFA384x_EVACK);
+
+	}
+
+	/* Now, the info frame fid */
+	result = hfa384x_cmd_allocate(hw, HFA384x_INFOFRM_MAXLEN);
+	if (result != 0) {
+		WLAN_LOG_ERROR("Allocate(tx) command failed.\n");
+		goto failed;
+	}
+	i = 0;
+	do {
+		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+		udelay(10);
+		i++;
+	} while ( !HFA384x_EVSTAT_ISALLOC(reg) && i < 50); /* 50 is timeout */
+	if ( i >= 50 ) {
+		WLAN_LOG_ERROR("Timed out waiting for evalloc(info).\n");
+		result = -ETIMEDOUT;
+		goto failed;
+	}
+	hw->infofid = hfa384x_getreg(hw, HFA384x_ALLOCFID);
+	reg = HFA384x_EVACK_ALLOC_SET(1);
+	hfa384x_setreg(hw, reg, HFA384x_EVACK);
+	WLAN_LOG_DEBUG(4,"hw->infofid=0x%04x\n", hw->infofid);
+
+	/* Set swsupport regs to magic # for card presence detection */
+	hfa384x_setreg(hw, HFA384x_DRVR_MAGIC, HFA384x_SWSUPPORT0);
+
+	/* Now enable the interrupts and set the running state */
+	hfa384x_setreg(hw, 0xffff, HFA384x_EVSTAT);
+	hfa384x_events_all(hw);
+
+	hw->state = HFA384x_STATE_RUNNING;
+
+	goto done;
+failed:
+	WLAN_LOG_ERROR("Failed, result=%d\n", result);
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_stop
+*
+* Issues the initialize command to leave us in the 'reset' state.
+*
+* Arguments:
+*	hw		device structure
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_stop(hfa384x_t *hw)
+{
+	int	result = 0;
+	int i;
+	DBFENTER;
+
+	del_timer_sync(&hw->commsqual_timer);
+
+	if ( hw->wlandev->hwremoved ) {
+		/* only flush when we're shutting down for good */
+		flush_scheduled_work();
+	}
+
+	if (hw->state == HFA384x_STATE_RUNNING) {
+		/*
+		 * Send the MAC initialize cmd.
+		 */
+		hfa384x_cmd_initialize(hw);
+
+		/*
+		 * Make absolutely sure interrupts are disabled and any
+		 * layabout events cleared
+		 */
+		hfa384x_setreg(hw, 0, HFA384x_INTEN);
+		hfa384x_setreg(hw, 0xffff, HFA384x_EVACK);
+	}
+
+	tasklet_kill(&hw->bap_tasklet);
+
+	hw->link_status = HFA384x_LINK_NOTCONNECTED;
+	hw->state = HFA384x_STATE_INIT;
+
+	/* Clear all the port status */
+	for ( i = 0; i < HFA384x_NUMPORTS_MAX; i++) {
+		hw->port_enabled[i] = 0;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_txframe
+*
+* Takes a frame from prism2sta and queues it for transmission.
+*
+* Arguments:
+*	hw		device structure
+*	skb		packet buffer struct.  Contains an 802.11
+*			data frame.
+*       p80211_hdr      points to the 802.11 header for the packet.
+* Returns:
+*	0		Success and more buffs available
+*	1		Success but no more buffs
+*	2		Allocation failure
+*	3		MAC Tx command failed
+*	4		Buffer full or queue busy
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep)
+{
+	hfa384x_tx_frame_t	txdesc;
+	UINT16			macq = 0;
+	UINT16			fid;
+	int			result;
+
+	DBFENTER;
+
+	/* Build Tx frame structure */
+	/* Set up the control field */
+	memset(&txdesc, 0, sizeof(txdesc));
+
+/* Tx complete and Tx exception disable per dleach.  Might be causing
+ * buf depletion
+ */
+#define DOBOTH 1
+#if DOBOTH
+	txdesc.tx_control =
+		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
+		HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(1);
+#elif DOEXC
+	txdesc.tx_control =
+		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
+		HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(0);
+#else
+	txdesc.tx_control =
+		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
+		HFA384x_TX_TXEX_SET(0) | HFA384x_TX_TXOK_SET(0);
+#endif
+
+	/* if we're using host WEP, increase size by IV+ICV */
+	if (p80211_wep->data) {
+		txdesc.data_len = host2hfa384x_16(skb->len+8);
+		//		txdesc.tx_control |= HFA384x_TX_NOENCRYPT_SET(1);
+	} else {
+		txdesc.data_len =  host2hfa384x_16(skb->len);
+	}
+
+	txdesc.tx_control = host2hfa384x_16(txdesc.tx_control);
+	/* copy the header over to the txdesc */
+	memcpy(&(txdesc.frame_control), p80211_hdr, sizeof(p80211_hdr_t));
+
+	/* Since tbusy is set whenever the stack is empty, there should
+	 * always be something on the stack if we get to this point.
+	 * [MSM]: NOT TRUE!!!!! so I added the test of fid below.
+	 */
+
+	/* Allocate FID */
+
+	fid = txfid_queue_remove(hw);
+
+	if ( fid == 0 ) { /* stack or queue was empty */
+		return 4;
+	}
+
+	/* now let's get the cmdlock */
+	spin_lock(&hw->cmdlock);
+
+	/* Copy descriptor+payload to FID */
+        if (p80211_wep->data) {
+		result = hfa384x_copy_to_bap4(hw, HFA384x_BAP_PROC, fid, 0,
+					      &txdesc, sizeof(txdesc),
+					      p80211_wep->iv, sizeof(p80211_wep->iv),
+					      p80211_wep->data, skb->len,
+					      p80211_wep->icv, sizeof(p80211_wep->icv));
+	} else {
+		result = hfa384x_copy_to_bap4(hw, HFA384x_BAP_PROC, fid, 0,
+					      &txdesc, sizeof(txdesc),
+					      skb->data, skb->len,
+					      NULL, 0, NULL, 0);
+	}
+
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			"copy_to_bap(%04x, %d, %d) failed, result=0x%x\n",
+			fid,
+		 	sizeof(txdesc),
+	 		skb->len,
+			result);
+
+		/* put the fid back in the queue */
+		txfid_queue_add(hw, fid);
+
+		result = 3;
+		goto failed;
+	}
+
+	/* Issue Tx command */
+	result = hfa384x_cmd_transmit(hw, HFA384x_TXCMD_RECL, macq, fid);
+
+	if ( result != 0 ) {
+		txfid_queue_add(hw, fid);
+
+		WLAN_LOG_DEBUG(1,"cmd_tx(%04x) failed, result=%d\n",
+			fid, result);
+		result = 3;
+		goto failed;
+	}
+
+	/* indicate we haven't any buffers, int_alloc will clear */
+	result = txfid_queue_empty(hw);
+failed:
+
+	spin_unlock(&hw->cmdlock);
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_interrupt
+*
+* Driver interrupt handler.
+*
+* Arguments:
+*	irq		irq number
+*	dev_id		pointer to the device
+*	regs		registers
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	May result in a frame being passed up the stack or an info
+*	frame being handled.
+*
+* Call context:
+*	Ummm, could it be interrupt?
+----------------------------------------------------------------*/
+irqreturn_t hfa384x_interrupt(int irq, void *dev_id PT_REGS)
+{
+	int			reg;
+	wlandevice_t		*wlandev = (wlandevice_t*)dev_id;
+	hfa384x_t		*hw = wlandev->priv;
+	int			ev_read = 0;
+	DBFENTER;
+
+	if (!wlandev || wlandev->hwremoved)
+		return IRQ_NONE;  /* Not much we can do w/o hardware */
+#if (WLAN_HOSTIF == WLAN_PCMCIA)
+	if (hw->iobase == 0)  /* XXX FIXME Properly */
+		return IRQ_NONE;
+#endif
+
+	for (;;ev_read++) {
+		if (ev_read >= prism2_irq_evread_max)
+			break;
+
+		/* Check swsupport reg magic # for card presence */
+		reg = hfa384x_getreg(hw, HFA384x_SWSUPPORT0);
+		if ( reg != HFA384x_DRVR_MAGIC) {
+			WLAN_LOG_DEBUG(2, "irq=%d, no magic.  Card removed?.\n", irq);
+			break;
+		}
+
+		/* read the EvStat register for interrupt enabled events */
+		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+
+		/* AND with the enabled interrupts */
+		reg &= hfa384x_getreg(hw, HFA384x_INTEN);
+
+		/* Handle the events */
+		if ( HFA384x_EVSTAT_ISWTERR(reg) ){
+			WLAN_LOG_ERROR(
+			"Error: WTERR interrupt received (unhandled).\n");
+			hfa384x_setreg(hw, HFA384x_EVACK_WTERR_SET(1),
+				HFA384x_EVACK);
+		}
+
+		if ( HFA384x_EVSTAT_ISINFDROP(reg) ){
+			hfa384x_int_infdrop(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_INFDROP_SET(1),
+				HFA384x_EVACK);
+		}
+
+		if (HFA384x_EVSTAT_ISBAP_OP(reg)) {
+			/* Disable the BAP interrupts */
+			hfa384x_events_nobap(hw);
+			tasklet_schedule(&hw->bap_tasklet);
+		}
+
+		if ( HFA384x_EVSTAT_ISALLOC(reg) ){
+			hfa384x_int_alloc(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_ALLOC_SET(1),
+				HFA384x_EVACK);
+		}
+
+		if ( HFA384x_EVSTAT_ISDTIM(reg) ){
+			hfa384x_int_dtim(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_DTIM_SET(1),
+				HFA384x_EVACK);
+		}
+#ifdef CMD_IRQ
+		if ( HFA384x_EVSTAT_ISCMD(reg) ){
+			hfa384x_int_cmd(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_CMD_SET(1),
+				       HFA384x_EVACK);
+		}
+#endif
+
+		/* allow the evstat to be updated after the evack */
+		udelay(20);
+	}
+
+	DBFEXIT;
+	return IRQ_HANDLED;
+}
+
+#ifdef CMD_IRQ
+/*----------------------------------------------------------------
+* hfa384x_int_cmd
+*
+* Handles command completion event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void hfa384x_int_cmd(wlandevice_t *wlandev)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	DBFENTER;
+
+	// check to make sure it's the right command?
+	if (hw->cmddata) {
+		hw->cmddata->status = hfa384x_getreg(hw, HFA384x_STATUS);
+		hw->cmddata->resp0 = hfa384x_getreg(hw, HFA384x_RESP0);
+		hw->cmddata->resp1 = hfa384x_getreg(hw, HFA384x_RESP1);
+		hw->cmddata->resp2 = hfa384x_getreg(hw, HFA384x_RESP2);
+	}
+	hw->cmdflag = 1;
+
+	printk(KERN_INFO "um. int_cmd\n");
+
+	wake_up_interruptible(&hw->cmdq);
+
+	// XXXX perform a bap copy too?
+
+	DBFEXIT;
+	return;
+}
+#endif
+
+/*----------------------------------------------------------------
+* hfa384x_int_dtim
+*
+* Handles the DTIM early warning event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_int_dtim(wlandevice_t *wlandev)
+{
+#if 0
+	hfa384x_t		*hw = wlandev->priv;
+#endif
+	DBFENTER;
+	prism2sta_ev_dtim(wlandev);
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_int_infdrop
+*
+* Handles the InfDrop event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_int_infdrop(wlandevice_t *wlandev)
+{
+#if 0
+	hfa384x_t		*hw = wlandev->priv;
+#endif
+	DBFENTER;
+	prism2sta_ev_infdrop(wlandev);
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_int_info
+*
+* Handles the Info event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	tasklet
+----------------------------------------------------------------*/
+static void hfa384x_int_info(wlandevice_t *wlandev)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	UINT16			reg;
+	hfa384x_InfFrame_t	inf;
+	int			result;
+	DBFENTER;
+	/* Retrieve the FID */
+	reg = hfa384x_getreg(hw, HFA384x_INFOFID);
+
+	/* Retrieve the length */
+	result = hfa384x_copy_from_bap( hw,
+		HFA384x_BAP_INT, reg, 0, &inf.framelen, sizeof(UINT16));
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
+			reg, sizeof(inf), result);
+		goto failed;
+	}
+	inf.framelen = hfa384x2host_16(inf.framelen);
+
+	/* Retrieve the rest */
+	result = hfa384x_copy_from_bap( hw,
+		HFA384x_BAP_INT, reg, sizeof(UINT16),
+		&(inf.infotype), inf.framelen * sizeof(UINT16));
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
+			reg, sizeof(inf), result);
+		goto failed;
+	}
+
+	prism2sta_ev_info(wlandev, &inf);
+failed:
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_int_txexc
+*
+* Handles the TxExc event.  A Transmit Exception event indicates
+* that the MAC's TX process was unsuccessful - so the packet did
+* not get transmitted.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	tasklet
+----------------------------------------------------------------*/
+static void hfa384x_int_txexc(wlandevice_t *wlandev)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	UINT16			status;
+	UINT16			fid;
+	int			result = 0;
+	DBFENTER;
+	/* Collect the status and display */
+	fid = hfa384x_getreg(hw, HFA384x_TXCOMPLFID);
+	result = hfa384x_copy_from_bap(hw, HFA384x_BAP_INT, fid, 0, &status, sizeof(status));
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
+			fid, sizeof(status), result);
+		goto failed;
+	}
+	status = hfa384x2host_16(status);
+	prism2sta_ev_txexc(wlandev, status);
+failed:
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_int_tx
+*
+* Handles the Tx event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	tasklet
+----------------------------------------------------------------*/
+static void hfa384x_int_tx(wlandevice_t *wlandev)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	UINT16			fid;
+	UINT16			status;
+	int			result = 0;
+	DBFENTER;
+	fid = hfa384x_getreg(hw, HFA384x_TXCOMPLFID);
+	result = hfa384x_copy_from_bap(hw, HFA384x_BAP_INT, fid, 0, &status, sizeof(status));
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			"copy_from_bap(0x%04x, 0, %d) failed, result=0x%x\n",
+			fid, sizeof(status), result);
+		goto failed;
+	}
+	status = hfa384x2host_16(status);
+	prism2sta_ev_tx(wlandev, status);
+failed:
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_int_rx
+*
+* Handles the Rx event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	tasklet
+----------------------------------------------------------------*/
+static void hfa384x_int_rx(wlandevice_t *wlandev)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	UINT16			rxfid;
+	hfa384x_rx_frame_t	rxdesc;
+	int			result;
+	int                     hdrlen;
+	UINT16                  fc;
+	p80211_rxmeta_t	*rxmeta;
+	struct sk_buff          *skb = NULL;
+	UINT8 *datap;
+
+	DBFENTER;
+
+	/* Get the FID */
+	rxfid = hfa384x_getreg(hw, HFA384x_RXFID);
+	/* Get the descriptor (including headers) */
+	result = hfa384x_copy_from_bap(hw,
+			HFA384x_BAP_INT,
+			rxfid,
+			0,
+			&rxdesc,
+			sizeof(rxdesc));
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			"copy_from_bap(0x%04x, %d, %d) failed, result=0x%x\n",
+			rxfid,
+			0,
+			sizeof(rxdesc),
+			result);
+		goto done;
+	}
+
+	/* Byte order convert once up front. */
+	rxdesc.status =	hfa384x2host_16(rxdesc.status);
+	rxdesc.time =	hfa384x2host_32(rxdesc.time);
+
+	/* drop errors and whatnot in promisc mode */
+	if (( wlandev->netdev->flags & IFF_PROMISC ) &&
+	    (HFA384x_RXSTATUS_ISFCSERR(rxdesc.status) ||
+	     HFA384x_RXSTATUS_ISUNDECR(rxdesc.status)))
+	  goto done;
+
+	/* Now handle frame based on port# */
+	switch( HFA384x_RXSTATUS_MACPORT_GET(rxdesc.status) )
+	{
+	case 0:
+
+		fc = ieee2host16(rxdesc.frame_control);
+
+		/* If exclude and we receive an unencrypted, drop it */
+		if ( (wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED) &&
+		     !WLAN_GET_FC_ISWEP(fc)) {
+			goto done;
+		}
+
+		hdrlen = p80211_headerlen(fc);
+
+		/* Allocate the buffer, note CRC (aka FCS). pballoc */
+		/* assumes there needs to be space for one */
+		skb = dev_alloc_skb(hfa384x2host_16(rxdesc.data_len) + hdrlen + WLAN_CRC_LEN + 2); /* a little extra */
+
+		if ( ! skb ) {
+			WLAN_LOG_ERROR("alloc_skb failed.\n");
+			goto done;
+                }
+
+		skb->dev = wlandev->netdev;
+
+		/* theoretically align the IP header on a 32-bit word. */
+		if ( hdrlen == WLAN_HDR_A4_LEN )
+			skb_reserve(skb, 2);
+
+		/* Copy the 802.11 hdr to the buffer */
+		datap = skb_put(skb, WLAN_HDR_A3_LEN);
+		memcpy(datap, &rxdesc.frame_control, WLAN_HDR_A3_LEN);
+
+		/* Snag the A4 address if present */
+		if (hdrlen == WLAN_HDR_A4_LEN) {
+			datap = skb_put(skb, WLAN_ADDR_LEN);
+			memcpy(datap, &rxdesc.address4, WLAN_HDR_A3_LEN);
+		}
+
+		/* we can convert the data_len as we passed the original on */
+		rxdesc.data_len = hfa384x2host_16(rxdesc.data_len);
+
+		/* Copy the payload data to the buffer */
+		if ( rxdesc.data_len > 0 ) {
+			datap = skb_put(skb, rxdesc.data_len);
+			result = hfa384x_copy_from_bap(hw,
+				HFA384x_BAP_INT, rxfid, HFA384x_RX_DATA_OFF,
+				datap, rxdesc.data_len);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+					"copy_from_bap(0x%04x, %d, %d) failed, result=0x%x\n",
+					rxfid,
+					HFA384x_RX_DATA_OFF,
+					rxdesc.data_len,
+					result);
+				goto failed;
+			}
+		}
+		/* the prism2 cards don't return the FCS */
+		datap = skb_put(skb, WLAN_CRC_LEN);
+		memset (datap, 0xff, WLAN_CRC_LEN);
+		skb_reset_mac_header(skb);
+
+		/* Attach the rxmeta, set some stuff */
+		p80211skb_rxmeta_attach(wlandev, skb);
+		rxmeta = P80211SKB_RXMETA(skb);
+		rxmeta->mactime = rxdesc.time;
+		rxmeta->rxrate = rxdesc.rate;
+		rxmeta->signal = rxdesc.signal - hw->dbmadjust;
+		rxmeta->noise = rxdesc.silence - hw->dbmadjust;
+
+		prism2sta_ev_rx(wlandev, skb);
+		goto done;
+	case 7:
+
+        	if ( ! HFA384x_RXSTATUS_ISFCSERR(rxdesc.status) ) {
+                        hfa384x_int_rxmonitor( wlandev, rxfid, &rxdesc);
+                } else {
+                        WLAN_LOG_DEBUG(3,"Received monitor frame: FCSerr set\n");
+                }
+		goto done;
+
+	default:
+
+		WLAN_LOG_WARNING("Received frame on unsupported port=%d\n",
+			HFA384x_RXSTATUS_MACPORT_GET(rxdesc.status) );
+		goto done;
+	}
+
+ failed:
+	dev_kfree_skb(skb);
+
+ done:
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_int_rxmonitor
+*
+* Helper function for int_rx.  Handles monitor frames.
+* Note that this function allocates space for the FCS and sets it
+* to 0xffffffff.  The hfa384x doesn't give us the FCS value but the
+* higher layers expect it.  0xffffffff is used as a flag to indicate
+* the FCS is bogus.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	rxfid		received FID
+*	rxdesc		rx descriptor read from card in int_rx
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	Allocates an skb and passes it up via the PF_PACKET interface.
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_int_rxmonitor( wlandevice_t *wlandev, UINT16 rxfid,
+				   hfa384x_rx_frame_t *rxdesc)
+{
+	hfa384x_t			*hw = wlandev->priv;
+	UINT				hdrlen = 0;
+	UINT				datalen = 0;
+	UINT				skblen = 0;
+	UINT				truncated = 0;
+	UINT8				*datap;
+	UINT16				fc;
+	struct sk_buff			*skb;
+
+	DBFENTER;
+	/* Don't forget the status, time, and data_len fields are in host order */
+	/* Figure out how big the frame is */
+	fc = ieee2host16(rxdesc->frame_control);
+	hdrlen = p80211_headerlen(fc);
+	datalen = hfa384x2host_16(rxdesc->data_len);
+
+	/* Allocate an ind message+framesize skb */
+	skblen = sizeof(p80211msg_lnxind_wlansniffrm_t) +
+		hdrlen + datalen + WLAN_CRC_LEN;
+
+	/* sanity check the length */
+	if ( skblen >
+		(sizeof(p80211msg_lnxind_wlansniffrm_t) +
+		WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN) ) {
+		WLAN_LOG_DEBUG(1, "overlen frm: len=%d\n",
+			skblen - sizeof(p80211msg_lnxind_wlansniffrm_t));
+	}
+
+	if ( (skb = dev_alloc_skb(skblen)) == NULL ) {
+		WLAN_LOG_ERROR("alloc_skb failed trying to allocate %d bytes\n", skblen);
+		return;
+	}
+
+	/* only prepend the prism header if in the right mode */
+	if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
+	    (hw->sniffhdr == 0)) {
+		p80211msg_lnxind_wlansniffrm_t	*msg;
+		datap = skb_put(skb, sizeof(p80211msg_lnxind_wlansniffrm_t));
+		msg = (p80211msg_lnxind_wlansniffrm_t*) datap;
+
+		/* Initialize the message members */
+		msg->msgcode = DIDmsg_lnxind_wlansniffrm;
+		msg->msglen = sizeof(p80211msg_lnxind_wlansniffrm_t);
+		strcpy(msg->devname, wlandev->name);
+
+		msg->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
+		msg->hosttime.status = 0;
+		msg->hosttime.len = 4;
+		msg->hosttime.data = jiffies;
+
+		msg->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
+		msg->mactime.status = 0;
+		msg->mactime.len = 4;
+		msg->mactime.data = rxdesc->time * 1000;
+
+		msg->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
+		msg->channel.status = 0;
+		msg->channel.len = 4;
+		msg->channel.data = hw->sniff_channel;
+
+		msg->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
+		msg->rssi.status = P80211ENUM_msgitem_status_no_value;
+		msg->rssi.len = 4;
+		msg->rssi.data = 0;
+
+		msg->sq.did = DIDmsg_lnxind_wlansniffrm_sq;
+		msg->sq.status = P80211ENUM_msgitem_status_no_value;
+		msg->sq.len = 4;
+		msg->sq.data = 0;
+
+		msg->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
+		msg->signal.status = 0;
+		msg->signal.len = 4;
+		msg->signal.data = rxdesc->signal;
+
+		msg->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
+		msg->noise.status = 0;
+		msg->noise.len = 4;
+		msg->noise.data = rxdesc->silence;
+
+		msg->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
+		msg->rate.status = 0;
+		msg->rate.len = 4;
+		msg->rate.data = rxdesc->rate / 5; /* set to 802.11 units */
+
+		msg->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
+		msg->istx.status = 0;
+		msg->istx.len = 4;
+		msg->istx.data = P80211ENUM_truth_false;
+
+		msg->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
+		msg->frmlen.status = 0;
+		msg->frmlen.len = 4;
+		msg->frmlen.data = hdrlen + datalen + WLAN_CRC_LEN;
+	} else if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
+		   (hw->sniffhdr != 0)) {
+		p80211_caphdr_t		*caphdr;
+		/* The NEW header format! */
+		datap = skb_put(skb, sizeof(p80211_caphdr_t));
+		caphdr = (p80211_caphdr_t*) datap;
+
+		caphdr->version =	htonl(P80211CAPTURE_VERSION);
+		caphdr->length =	htonl(sizeof(p80211_caphdr_t));
+		caphdr->mactime =	__cpu_to_be64(rxdesc->time);
+		caphdr->hosttime =	__cpu_to_be64(jiffies);
+		caphdr->phytype =	htonl(4); /* dss_dot11_b */
+		caphdr->channel =	htonl(hw->sniff_channel);
+		caphdr->datarate =	htonl(rxdesc->rate);
+		caphdr->antenna =	htonl(0); /* unknown */
+		caphdr->priority =	htonl(0); /* unknown */
+		caphdr->ssi_type =	htonl(3); /* rssi_raw */
+		caphdr->ssi_signal =	htonl(rxdesc->signal);
+		caphdr->ssi_noise =	htonl(rxdesc->silence);
+		caphdr->preamble =	htonl(0); /* unknown */
+		caphdr->encoding =	htonl(1); /* cck */
+	}
+	/* Copy the 802.11 header to the skb (ctl frames may be less than a full header) */
+	datap = skb_put(skb, hdrlen);
+	memcpy( datap, &(rxdesc->frame_control), hdrlen);
+
+	/* If any, copy the data from the card to the skb */
+	if ( datalen > 0 )
+	{
+		/* Truncate the packet if the user wants us to */
+		UINT	dataread = datalen;
+		if(hw->sniff_truncate > 0 && dataread > hw->sniff_truncate) {
+			dataread = hw->sniff_truncate;
+			truncated = 1;
+		}
+
+		datap = skb_put(skb, dataread);
+		hfa384x_copy_from_bap(hw,
+			HFA384x_BAP_INT, rxfid, HFA384x_RX_DATA_OFF,
+			datap, dataread);
+
+		/* check for unencrypted stuff if WEP bit set. */
+		if (*(datap - hdrlen + 1) & 0x40) // wep set
+		  if ((*(datap) == 0xaa) && (*(datap+1) == 0xaa))
+		    *(datap - hdrlen + 1) &= 0xbf; // clear wep; it's the 802.2 header!
+	}
+
+	if (!truncated && hw->sniff_fcs) {
+		/* Set the FCS */
+		datap = skb_put(skb, WLAN_CRC_LEN);
+		memset( datap, 0xff, WLAN_CRC_LEN);
+	}
+
+	/* pass it back up */
+	prism2sta_ev_rx(wlandev, skb);
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_int_alloc
+*
+* Handles the Alloc event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_int_alloc(wlandevice_t *wlandev)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	UINT16			fid;
+	INT16			result;
+
+	DBFENTER;
+
+	/* Handle the reclaimed FID */
+	/*   collect the FID and push it onto the stack */
+	fid = hfa384x_getreg(hw, HFA384x_ALLOCFID);
+
+	if ( fid != hw->infofid ) { /* It's a transmit fid */
+		WLAN_LOG_DEBUG(5, "int_alloc(%#x)\n", fid);
+		result = txfid_queue_add(hw, fid);
+		if (result != -1) {
+			prism2sta_ev_alloc(wlandev);
+			WLAN_LOG_DEBUG(5, "q_add.\n");
+		} else {
+			WLAN_LOG_DEBUG(5, "q_full.\n");
+		}
+	} else {
+		/* unlock the info fid */
+		up(&hw->infofid_sem);
+	}
+
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_handover
+*
+* Sends a handover notification to the MAC.
+*
+* Arguments:
+*	hw		device structure
+*	addr		address of station that's left
+*
+* Returns:
+*	zero		success.
+*	-ERESTARTSYS	received signal while waiting for semaphore.
+*	-EIO		failed to write to bap, or failed in cmd.
+*
+* Side effects:
+*
+* Call context:
+*	process thread, NOTE: this call may block on a semaphore!
+----------------------------------------------------------------*/
+int hfa384x_drvr_handover( hfa384x_t *hw, UINT8 *addr)
+{
+	int			result = 0;
+        hfa384x_HandoverAddr_t  rec;
+        UINT                    len;
+        DBFENTER;
+
+	/* Acquire the infofid */
+	if ( down_interruptible(&hw->infofid_sem) ) {
+		result = -ERESTARTSYS;
+		goto failed;
+	}
+
+        /* Set up the record */
+        len = sizeof(hfa384x_HandoverAddr_t);
+        rec.framelen = host2hfa384x_16(len/2 - 1);
+        rec.infotype = host2hfa384x_16(HFA384x_IT_HANDOVERADDR);
+        memcpy(rec.handover_addr, addr, sizeof(rec.handover_addr));
+
+        /* Issue the command */
+        result = hfa384x_cmd_notify(hw, 1, hw->infofid, &rec, len);
+
+        if ( result != 0 ) {
+                WLAN_LOG_DEBUG(1,"cmd_notify(%04x) failed, result=%d",
+                        hw->infofid, result);
+		result = -EIO;
+                goto failed;
+        }
+
+failed:
+	DBFEXIT;
+	return result;
+}
+
+void hfa384x_tx_timeout(wlandevice_t *wlandev)
+{
+	DBFENTER;
+
+	WLAN_LOG_WARNING("Implement me.\n");
+
+	DBFEXIT;
+}
+
+/* Handles all "rx" BAP operations */
+static void     hfa384x_bap_tasklet(unsigned long data)
+{
+	hfa384x_t *hw = (hfa384x_t *) data;
+	wlandevice_t *wlandev = hw->wlandev;
+	int counter = prism2_irq_evread_max;
+	int			reg;
+
+	DBFENTER;
+
+	while (counter-- > 0) {
+		/* Get interrupt register */
+		reg = hfa384x_getreg(hw, HFA384x_EVSTAT);
+
+		if ((reg == 0xffff) ||
+		    !(reg & HFA384x_INT_BAP_OP)) {
+			break;
+		}
+
+		if ( HFA384x_EVSTAT_ISINFO(reg) ){
+			hfa384x_int_info(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_INFO_SET(1),
+				HFA384x_EVACK);
+		}
+		if ( HFA384x_EVSTAT_ISTXEXC(reg) ){
+			hfa384x_int_txexc(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_TXEXC_SET(1),
+				HFA384x_EVACK);
+		}
+		if ( HFA384x_EVSTAT_ISTX(reg) ){
+			hfa384x_int_tx(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_TX_SET(1),
+				HFA384x_EVACK);
+		}
+		if ( HFA384x_EVSTAT_ISRX(reg) ){
+			hfa384x_int_rx(wlandev);
+			hfa384x_setreg(hw, HFA384x_EVACK_RX_SET(1),
+				HFA384x_EVACK);
+		}
+	}
+
+	/* re-enable interrupts */
+	hfa384x_events_all(hw);
+
+	DBFEXIT;
+}
diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h
new file mode 100644
index 0000000..a205463
--- /dev/null
+++ b/drivers/staging/wlan-ng/hfa384x.h
@@ -0,0 +1,3067 @@
+/* hfa384x.h
+*
+* Defines the constants and data structures for the hfa384x
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+*   [Implementation and usage notes]
+*
+*   [References]
+*	CW10 Programmer's Manual v1.5
+*	IEEE 802.11 D10.0
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _HFA384x_H
+#define _HFA384x_H
+
+/*=============================================================*/
+#define HFA384x_FIRMWARE_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+
+#define HFA384x_LEVEL_TO_dBm(v)   (0x100 + (v) * 100 / 255 - 100)
+
+/*------ Constants --------------------------------------------*/
+/*--- Mins & Maxs -----------------------------------*/
+#define		HFA384x_CMD_ALLOC_LEN_MIN	((UINT16)4)
+#define		HFA384x_CMD_ALLOC_LEN_MAX	((UINT16)2400)
+#define		HFA384x_BAP_DATALEN_MAX		((UINT16)4096)
+#define		HFA384x_BAP_OFFSET_MAX		((UINT16)4096)
+#define		HFA384x_PORTID_MAX		((UINT16)7)
+#define		HFA384x_NUMPORTS_MAX		((UINT16)(HFA384x_PORTID_MAX+1))
+#define		HFA384x_PDR_LEN_MAX		((UINT16)512)	/* in bytes, from EK */
+#define		HFA384x_PDA_RECS_MAX		((UINT16)200)	/* a guess */
+#define		HFA384x_PDA_LEN_MAX		((UINT16)1024)	/* in bytes, from EK */
+#define		HFA384x_SCANRESULT_MAX		((UINT16)31)
+#define		HFA384x_HSCANRESULT_MAX		((UINT16)31)
+#define		HFA384x_CHINFORESULT_MAX	((UINT16)16)
+#define		HFA384x_DRVR_FIDSTACKLEN_MAX	(10)
+#define		HFA384x_DRVR_TXBUF_MAX		(sizeof(hfa384x_tx_frame_t) + \
+						WLAN_DATA_MAXLEN - \
+						WLAN_WEP_IV_LEN - \
+						WLAN_WEP_ICV_LEN + 2)
+#define		HFA384x_DRVR_MAGIC		(0x4a2d)
+#define		HFA384x_INFODATA_MAXLEN		(sizeof(hfa384x_infodata_t))
+#define		HFA384x_INFOFRM_MAXLEN		(sizeof(hfa384x_InfFrame_t))
+#define		HFA384x_RID_GUESSING_MAXLEN	2048  /* I'm not really sure */
+#define		HFA384x_RIDDATA_MAXLEN		HFA384x_RID_GUESSING_MAXLEN
+#define		HFA384x_USB_RWMEM_MAXLEN	2048
+
+/*--- Support Constants -----------------------------*/
+#define		HFA384x_BAP_PROC			((UINT16)0)
+#define		HFA384x_BAP_INT				((UINT16)1)
+#define		HFA384x_PORTTYPE_IBSS			((UINT16)0)
+#define		HFA384x_PORTTYPE_BSS			((UINT16)1)
+#define		HFA384x_PORTTYPE_WDS			((UINT16)2)
+#define		HFA384x_PORTTYPE_PSUEDOIBSS		((UINT16)3)
+#define		HFA384x_PORTTYPE_HOSTAP    		((UINT16)6)
+#define		HFA384x_WEPFLAGS_PRIVINVOKED		((UINT16)BIT0)
+#define		HFA384x_WEPFLAGS_EXCLUDE		((UINT16)BIT1)
+#define		HFA384x_WEPFLAGS_DISABLE_TXCRYPT	((UINT16)BIT4)
+#define		HFA384x_WEPFLAGS_DISABLE_RXCRYPT	((UINT16)BIT7)
+#define		HFA384x_WEPFLAGS_DISALLOW_MIXED 	((UINT16)BIT11)
+#define		HFA384x_WEPFLAGS_IV_INTERVAL1		((UINT16)0)
+#define		HFA384x_WEPFLAGS_IV_INTERVAL10		((UINT16)BIT5)
+#define		HFA384x_WEPFLAGS_IV_INTERVAL50		((UINT16)BIT6)
+#define		HFA384x_WEPFLAGS_IV_INTERVAL100		((UINT16)(BIT5 | BIT6))
+#define		HFA384x_WEPFLAGS_FIRMWARE_WPA  		((UINT16)BIT8)
+#define		HFA384x_WEPFLAGS_HOST_MIC      		((UINT16)BIT9)
+#define 	HFA384x_ROAMMODE_FWSCAN_FWROAM		((UINT16)1)
+#define 	HFA384x_ROAMMODE_FWSCAN_HOSTROAM	((UINT16)2)
+#define 	HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM	((UINT16)3)
+#define 	HFA384x_PORTSTATUS_DISABLED		((UINT16)1)
+#define 	HFA384x_PORTSTATUS_INITSRCH		((UINT16)2)
+#define 	HFA384x_PORTSTATUS_CONN_IBSS		((UINT16)3)
+#define 	HFA384x_PORTSTATUS_CONN_ESS		((UINT16)4)
+#define 	HFA384x_PORTSTATUS_OOR_ESS		((UINT16)5)
+#define 	HFA384x_PORTSTATUS_CONN_WDS		((UINT16)6)
+#define 	HFA384x_PORTSTATUS_HOSTAP		((UINT16)8)
+#define		HFA384x_RATEBIT_1			((UINT16)1)
+#define		HFA384x_RATEBIT_2			((UINT16)2)
+#define		HFA384x_RATEBIT_5dot5			((UINT16)4)
+#define		HFA384x_RATEBIT_11			((UINT16)8)
+
+/*--- Just some symbolic names for legibility -------*/
+#define		HFA384x_TXCMD_NORECL		((UINT16)0)
+#define		HFA384x_TXCMD_RECL		((UINT16)1)
+
+/*--- MAC Internal memory constants and macros ------*/
+/* masks and macros used to manipulate MAC internal memory addresses. */
+/* MAC internal memory addresses are 23 bit quantities.  The MAC uses
+ * a paged address space where the upper 16 bits are the page number
+ * and the lower 7 bits are the offset.  There are various Host API
+ * elements that require two 16-bit quantities to specify a MAC
+ * internal memory address.  Unfortunately, some of the API's use a
+ * page/offset format where the offset value is JUST the lower seven
+ * bits and the page is  the remaining 16 bits.  Some of the API's
+ * assume that the 23 bit address has been split at the 16th bit.  We
+ * refer to these two formats as AUX format and CMD format.  The
+ * macros below help handle some of this.
+ */
+
+/* Handy constant */
+#define		HFA384x_ADDR_AUX_OFF_MAX	((UINT16)0x007f)
+
+/* Mask bits for discarding unwanted pieces in a flat address */
+#define		HFA384x_ADDR_FLAT_AUX_PAGE_MASK	(0x007fff80)
+#define		HFA384x_ADDR_FLAT_AUX_OFF_MASK	(0x0000007f)
+#define		HFA384x_ADDR_FLAT_CMD_PAGE_MASK	(0xffff0000)
+#define		HFA384x_ADDR_FLAT_CMD_OFF_MASK	(0x0000ffff)
+
+/* Mask bits for discarding unwanted pieces in AUX format 16-bit address parts */
+#define		HFA384x_ADDR_AUX_PAGE_MASK	(0xffff)
+#define		HFA384x_ADDR_AUX_OFF_MASK	(0x007f)
+
+/* Mask bits for discarding unwanted pieces in CMD format 16-bit address parts */
+#define		HFA384x_ADDR_CMD_PAGE_MASK	(0x007f)
+#define		HFA384x_ADDR_CMD_OFF_MASK	(0xffff)
+
+/* Make a 32-bit flat address from AUX format 16-bit page and offset */
+#define		HFA384x_ADDR_AUX_MKFLAT(p,o)	\
+		(((UINT32)(((UINT16)(p))&HFA384x_ADDR_AUX_PAGE_MASK)) <<7) | \
+		((UINT32)(((UINT16)(o))&HFA384x_ADDR_AUX_OFF_MASK))
+
+/* Make a 32-bit flat address from CMD format 16-bit page and offset */
+#define		HFA384x_ADDR_CMD_MKFLAT(p,o)	\
+		(((UINT32)(((UINT16)(p))&HFA384x_ADDR_CMD_PAGE_MASK)) <<16) | \
+		((UINT32)(((UINT16)(o))&HFA384x_ADDR_CMD_OFF_MASK))
+
+/* Make AUX format offset and page from a 32-bit flat address */
+#define		HFA384x_ADDR_AUX_MKPAGE(f) \
+		((UINT16)((((UINT32)(f))&HFA384x_ADDR_FLAT_AUX_PAGE_MASK)>>7))
+#define		HFA384x_ADDR_AUX_MKOFF(f) \
+		((UINT16)(((UINT32)(f))&HFA384x_ADDR_FLAT_AUX_OFF_MASK))
+
+/* Make CMD format offset and page from a 32-bit flat address */
+#define		HFA384x_ADDR_CMD_MKPAGE(f) \
+		((UINT16)((((UINT32)(f))&HFA384x_ADDR_FLAT_CMD_PAGE_MASK)>>16))
+#define		HFA384x_ADDR_CMD_MKOFF(f) \
+		((UINT16)(((UINT32)(f))&HFA384x_ADDR_FLAT_CMD_OFF_MASK))
+
+/*--- Aux register masks/tests ----------------------*/
+/* Some of the upper bits of the AUX offset register are used to */
+/*  select address space. */
+#define		HFA384x_AUX_CTL_EXTDS	(0x00)
+#define		HFA384x_AUX_CTL_NV	(0x01)
+#define		HFA384x_AUX_CTL_PHY	(0x02)
+#define		HFA384x_AUX_CTL_ICSRAM	(0x03)
+
+/* Make AUX register offset and page values from a flat address */
+#define		HFA384x_AUX_MKOFF(f, c) \
+	(HFA384x_ADDR_AUX_MKOFF(f) | (((UINT16)(c))<<12))
+#define		HFA384x_AUX_MKPAGE(f)	HFA384x_ADDR_AUX_MKPAGE(f)
+
+
+/*--- Controller Memory addresses -------------------*/
+#define		HFA3842_PDA_BASE	(0x007f0000UL)
+#define		HFA3841_PDA_BASE	(0x003f0000UL)
+#define		HFA3841_PDA_BOGUS_BASE	(0x00390000UL)
+
+/*--- Driver Download states  -----------------------*/
+#define		HFA384x_DLSTATE_DISABLED		0
+#define		HFA384x_DLSTATE_RAMENABLED		1
+#define		HFA384x_DLSTATE_FLASHENABLED		2
+#define		HFA384x_DLSTATE_FLASHWRITTEN		3
+#define		HFA384x_DLSTATE_FLASHWRITEPENDING	4
+#define		HFA384x_DLSTATE_GENESIS 		5
+
+/*--- Register I/O offsets --------------------------*/
+#if ((WLAN_HOSTIF == WLAN_PCMCIA) || (WLAN_HOSTIF == WLAN_PLX))
+
+#define		HFA384x_CMD_OFF			(0x00)
+#define		HFA384x_PARAM0_OFF		(0x02)
+#define		HFA384x_PARAM1_OFF		(0x04)
+#define		HFA384x_PARAM2_OFF		(0x06)
+#define		HFA384x_STATUS_OFF		(0x08)
+#define		HFA384x_RESP0_OFF		(0x0A)
+#define		HFA384x_RESP1_OFF		(0x0C)
+#define		HFA384x_RESP2_OFF		(0x0E)
+#define		HFA384x_INFOFID_OFF		(0x10)
+#define		HFA384x_RXFID_OFF		(0x20)
+#define		HFA384x_ALLOCFID_OFF		(0x22)
+#define		HFA384x_TXCOMPLFID_OFF		(0x24)
+#define		HFA384x_SELECT0_OFF		(0x18)
+#define		HFA384x_OFFSET0_OFF		(0x1C)
+#define		HFA384x_DATA0_OFF		(0x36)
+#define		HFA384x_SELECT1_OFF		(0x1A)
+#define		HFA384x_OFFSET1_OFF		(0x1E)
+#define		HFA384x_DATA1_OFF		(0x38)
+#define		HFA384x_EVSTAT_OFF		(0x30)
+#define		HFA384x_INTEN_OFF		(0x32)
+#define		HFA384x_EVACK_OFF		(0x34)
+#define		HFA384x_CONTROL_OFF		(0x14)
+#define		HFA384x_SWSUPPORT0_OFF		(0x28)
+#define		HFA384x_SWSUPPORT1_OFF		(0x2A)
+#define		HFA384x_SWSUPPORT2_OFF		(0x2C)
+#define		HFA384x_AUXPAGE_OFF		(0x3A)
+#define		HFA384x_AUXOFFSET_OFF		(0x3C)
+#define		HFA384x_AUXDATA_OFF		(0x3E)
+
+#elif (WLAN_HOSTIF == WLAN_PCI || WLAN_HOSTIF == WLAN_USB)
+
+#define		HFA384x_CMD_OFF			(0x00)
+#define		HFA384x_PARAM0_OFF		(0x04)
+#define		HFA384x_PARAM1_OFF		(0x08)
+#define		HFA384x_PARAM2_OFF		(0x0c)
+#define		HFA384x_STATUS_OFF		(0x10)
+#define		HFA384x_RESP0_OFF		(0x14)
+#define		HFA384x_RESP1_OFF		(0x18)
+#define		HFA384x_RESP2_OFF		(0x1c)
+#define		HFA384x_INFOFID_OFF		(0x20)
+#define		HFA384x_RXFID_OFF		(0x40)
+#define		HFA384x_ALLOCFID_OFF		(0x44)
+#define		HFA384x_TXCOMPLFID_OFF		(0x48)
+#define		HFA384x_SELECT0_OFF		(0x30)
+#define		HFA384x_OFFSET0_OFF		(0x38)
+#define		HFA384x_DATA0_OFF		(0x6c)
+#define		HFA384x_SELECT1_OFF		(0x34)
+#define		HFA384x_OFFSET1_OFF		(0x3c)
+#define		HFA384x_DATA1_OFF		(0x70)
+#define		HFA384x_EVSTAT_OFF		(0x60)
+#define		HFA384x_INTEN_OFF		(0x64)
+#define		HFA384x_EVACK_OFF		(0x68)
+#define		HFA384x_CONTROL_OFF		(0x28)
+#define		HFA384x_SWSUPPORT0_OFF		(0x50)
+#define		HFA384x_SWSUPPORT1_OFF		(0x54)
+#define		HFA384x_SWSUPPORT2_OFF		(0x58)
+#define		HFA384x_AUXPAGE_OFF		(0x74)
+#define		HFA384x_AUXOFFSET_OFF		(0x78)
+#define		HFA384x_AUXDATA_OFF		(0x7c)
+#define		HFA384x_PCICOR_OFF		(0x4c)
+#define		HFA384x_PCIHCR_OFF		(0x5c)
+#define		HFA384x_PCI_M0_ADDRH_OFF	(0x80)
+#define		HFA384x_PCI_M0_ADDRL_OFF	(0x84)
+#define		HFA384x_PCI_M0_LEN_OFF		(0x88)
+#define		HFA384x_PCI_M0_CTL_OFF		(0x8c)
+#define		HFA384x_PCI_STATUS_OFF		(0x98)
+#define		HFA384x_PCI_M1_ADDRH_OFF	(0xa0)
+#define		HFA384x_PCI_M1_ADDRL_OFF	(0xa4)
+#define		HFA384x_PCI_M1_LEN_OFF		(0xa8)
+#define		HFA384x_PCI_M1_CTL_OFF		(0xac)
+
+#endif
+
+/*--- Register Field Masks --------------------------*/
+#define		HFA384x_CMD_BUSY		((UINT16)BIT15)
+#define		HFA384x_CMD_AINFO		((UINT16)(BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8))
+#define		HFA384x_CMD_MACPORT		((UINT16)(BIT10 | BIT9 | BIT8))
+#define		HFA384x_CMD_RECL		((UINT16)BIT8)
+#define		HFA384x_CMD_WRITE		((UINT16)BIT8)
+#define		HFA384x_CMD_PROGMODE		((UINT16)(BIT9 | BIT8))
+#define		HFA384x_CMD_CMDCODE		((UINT16)(BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0))
+
+#define		HFA384x_STATUS_RESULT		((UINT16)(BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8))
+#define		HFA384x_STATUS_CMDCODE		((UINT16)(BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0))
+
+#define		HFA384x_OFFSET_BUSY		((UINT16)BIT15)
+#define		HFA384x_OFFSET_ERR		((UINT16)BIT14)
+#define		HFA384x_OFFSET_DATAOFF		((UINT16)(BIT11 | BIT10 | BIT9 | BIT8 | BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | BIT2 | BIT1))
+
+#define		HFA384x_EVSTAT_TICK		((UINT16)BIT15)
+#define		HFA384x_EVSTAT_WTERR		((UINT16)BIT14)
+#define		HFA384x_EVSTAT_INFDROP		((UINT16)BIT13)
+#define		HFA384x_EVSTAT_INFO		((UINT16)BIT7)
+#define		HFA384x_EVSTAT_DTIM		((UINT16)BIT5)
+#define		HFA384x_EVSTAT_CMD		((UINT16)BIT4)
+#define		HFA384x_EVSTAT_ALLOC		((UINT16)BIT3)
+#define		HFA384x_EVSTAT_TXEXC		((UINT16)BIT2)
+#define		HFA384x_EVSTAT_TX		((UINT16)BIT1)
+#define		HFA384x_EVSTAT_RX		((UINT16)BIT0)
+
+#define         HFA384x_INT_BAP_OP           (HFA384x_EVSTAT_INFO|HFA384x_EVSTAT_RX|HFA384x_EVSTAT_TX|HFA384x_EVSTAT_TXEXC)
+
+#define         HFA384x_INT_NORMAL           (HFA384x_EVSTAT_INFO|HFA384x_EVSTAT_RX|HFA384x_EVSTAT_TX|HFA384x_EVSTAT_TXEXC|HFA384x_EVSTAT_INFDROP|HFA384x_EVSTAT_ALLOC|HFA384x_EVSTAT_DTIM)
+
+#define		HFA384x_INTEN_TICK		((UINT16)BIT15)
+#define		HFA384x_INTEN_WTERR		((UINT16)BIT14)
+#define		HFA384x_INTEN_INFDROP		((UINT16)BIT13)
+#define		HFA384x_INTEN_INFO		((UINT16)BIT7)
+#define		HFA384x_INTEN_DTIM		((UINT16)BIT5)
+#define		HFA384x_INTEN_CMD		((UINT16)BIT4)
+#define		HFA384x_INTEN_ALLOC		((UINT16)BIT3)
+#define		HFA384x_INTEN_TXEXC		((UINT16)BIT2)
+#define		HFA384x_INTEN_TX		((UINT16)BIT1)
+#define		HFA384x_INTEN_RX		((UINT16)BIT0)
+
+#define		HFA384x_EVACK_TICK		((UINT16)BIT15)
+#define		HFA384x_EVACK_WTERR		((UINT16)BIT14)
+#define		HFA384x_EVACK_INFDROP		((UINT16)BIT13)
+#define		HFA384x_EVACK_INFO		((UINT16)BIT7)
+#define		HFA384x_EVACK_DTIM		((UINT16)BIT5)
+#define		HFA384x_EVACK_CMD		((UINT16)BIT4)
+#define		HFA384x_EVACK_ALLOC		((UINT16)BIT3)
+#define		HFA384x_EVACK_TXEXC		((UINT16)BIT2)
+#define		HFA384x_EVACK_TX		((UINT16)BIT1)
+#define		HFA384x_EVACK_RX		((UINT16)BIT0)
+
+#define		HFA384x_CONTROL_AUXEN		((UINT16)(BIT15 | BIT14))
+
+
+/*--- Command Code Constants --------------------------*/
+/*--- Controller Commands --------------------------*/
+#define		HFA384x_CMDCODE_INIT		((UINT16)0x00)
+#define		HFA384x_CMDCODE_ENABLE		((UINT16)0x01)
+#define		HFA384x_CMDCODE_DISABLE		((UINT16)0x02)
+#define		HFA384x_CMDCODE_DIAG		((UINT16)0x03)
+
+/*--- Buffer Mgmt Commands --------------------------*/
+#define		HFA384x_CMDCODE_ALLOC		((UINT16)0x0A)
+#define		HFA384x_CMDCODE_TX		((UINT16)0x0B)
+#define		HFA384x_CMDCODE_CLRPRST		((UINT16)0x12)
+
+/*--- Regulate Commands --------------------------*/
+#define		HFA384x_CMDCODE_NOTIFY		((UINT16)0x10)
+#define		HFA384x_CMDCODE_INQ		((UINT16)0x11)
+
+/*--- Configure Commands --------------------------*/
+#define		HFA384x_CMDCODE_ACCESS		((UINT16)0x21)
+#define		HFA384x_CMDCODE_DOWNLD		((UINT16)0x22)
+
+/*--- Debugging Commands -----------------------------*/
+#define 	HFA384x_CMDCODE_MONITOR		((UINT16)(0x38))
+#define		HFA384x_MONITOR_ENABLE		((UINT16)(0x0b))
+#define		HFA384x_MONITOR_DISABLE		((UINT16)(0x0f))
+
+/*--- Result Codes --------------------------*/
+#define		HFA384x_SUCCESS			((UINT16)(0x00))
+#define		HFA384x_CARD_FAIL		((UINT16)(0x01))
+#define		HFA384x_NO_BUFF			((UINT16)(0x05))
+#define		HFA384x_CMD_ERR			((UINT16)(0x7F))
+
+/*--- Programming Modes --------------------------
+	MODE 0: Disable programming
+	MODE 1: Enable volatile memory programming
+	MODE 2: Enable non-volatile memory programming
+	MODE 3: Program non-volatile memory section
+--------------------------------------------------*/
+#define		HFA384x_PROGMODE_DISABLE	((UINT16)0x00)
+#define		HFA384x_PROGMODE_RAM		((UINT16)0x01)
+#define		HFA384x_PROGMODE_NV		((UINT16)0x02)
+#define		HFA384x_PROGMODE_NVWRITE	((UINT16)0x03)
+
+/*--- AUX register enable --------------------------*/
+#define		HFA384x_AUXPW0			((UINT16)0xfe01)
+#define		HFA384x_AUXPW1			((UINT16)0xdc23)
+#define		HFA384x_AUXPW2			((UINT16)0xba45)
+
+#define		HFA384x_CONTROL_AUX_ISDISABLED	((UINT16)0x0000)
+#define		HFA384x_CONTROL_AUX_ISENABLED	((UINT16)0xc000)
+#define		HFA384x_CONTROL_AUX_DOENABLE	((UINT16)0x8000)
+#define		HFA384x_CONTROL_AUX_DODISABLE	((UINT16)0x4000)
+
+/*--- Record ID Constants --------------------------*/
+/*--------------------------------------------------------------------
+Configuration RIDs: Network Parameters, Static Configuration Entities
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_CNFPORTTYPE		((UINT16)0xFC00)
+#define		HFA384x_RID_CNFOWNMACADDR	((UINT16)0xFC01)
+#define		HFA384x_RID_CNFDESIREDSSID	((UINT16)0xFC02)
+#define		HFA384x_RID_CNFOWNCHANNEL	((UINT16)0xFC03)
+#define		HFA384x_RID_CNFOWNSSID		((UINT16)0xFC04)
+#define		HFA384x_RID_CNFOWNATIMWIN	((UINT16)0xFC05)
+#define		HFA384x_RID_CNFSYSSCALE		((UINT16)0xFC06)
+#define		HFA384x_RID_CNFMAXDATALEN	((UINT16)0xFC07)
+#define		HFA384x_RID_CNFWDSADDR		((UINT16)0xFC08)
+#define		HFA384x_RID_CNFPMENABLED	((UINT16)0xFC09)
+#define		HFA384x_RID_CNFPMEPS		((UINT16)0xFC0A)
+#define		HFA384x_RID_CNFMULTICASTRX	((UINT16)0xFC0B)
+#define		HFA384x_RID_CNFMAXSLEEPDUR	((UINT16)0xFC0C)
+#define		HFA384x_RID_CNFPMHOLDDUR	((UINT16)0xFC0D)
+#define		HFA384x_RID_CNFOWNNAME		((UINT16)0xFC0E)
+#define		HFA384x_RID_CNFOWNDTIMPER	((UINT16)0xFC10)
+#define		HFA384x_RID_CNFWDSADDR1		((UINT16)0xFC11)
+#define		HFA384x_RID_CNFWDSADDR2		((UINT16)0xFC12)
+#define		HFA384x_RID_CNFWDSADDR3		((UINT16)0xFC13)
+#define		HFA384x_RID_CNFWDSADDR4		((UINT16)0xFC14)
+#define		HFA384x_RID_CNFWDSADDR5		((UINT16)0xFC15)
+#define		HFA384x_RID_CNFWDSADDR6		((UINT16)0xFC16)
+#define		HFA384x_RID_CNFMCASTPMBUFF	((UINT16)0xFC17)
+
+/*--------------------------------------------------------------------
+Configuration RID lengths: Network Params, Static Config Entities
+  This is the length of JUST the DATA part of the RID (does not
+  include the len or code fields)
+--------------------------------------------------------------------*/
+/* TODO: fill in the rest of these */
+#define		HFA384x_RID_CNFPORTTYPE_LEN	((UINT16)2)
+#define		HFA384x_RID_CNFOWNMACADDR_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFDESIREDSSID_LEN	((UINT16)34)
+#define		HFA384x_RID_CNFOWNCHANNEL_LEN	((UINT16)2)
+#define		HFA384x_RID_CNFOWNSSID_LEN	((UINT16)34)
+#define		HFA384x_RID_CNFOWNATIMWIN_LEN	((UINT16)2)
+#define		HFA384x_RID_CNFSYSSCALE_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFMAXDATALEN_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFWDSADDR_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFPMENABLED_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFPMEPS_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFMULTICASTRX_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFMAXSLEEPDUR_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFPMHOLDDUR_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFOWNNAME_LEN	((UINT16)34)
+#define		HFA384x_RID_CNFOWNDTIMPER_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFWDSADDR1_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFWDSADDR2_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFWDSADDR3_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFWDSADDR4_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFWDSADDR5_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFWDSADDR6_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFMCASTPMBUFF_LEN	((UINT16)0)
+#define		HFA384x_RID_CNFAUTHENTICATION_LEN ((UINT16)sizeof(UINT16))
+#define		HFA384x_RID_CNFMAXSLEEPDUR_LEN	((UINT16)0)
+
+/*--------------------------------------------------------------------
+Configuration RIDs: Network Parameters, Dynamic Configuration Entities
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_GROUPADDR		((UINT16)0xFC80)
+#define		HFA384x_RID_CREATEIBSS		((UINT16)0xFC81)
+#define		HFA384x_RID_FRAGTHRESH		((UINT16)0xFC82)
+#define		HFA384x_RID_RTSTHRESH		((UINT16)0xFC83)
+#define		HFA384x_RID_TXRATECNTL		((UINT16)0xFC84)
+#define		HFA384x_RID_PROMISCMODE		((UINT16)0xFC85)
+#define		HFA384x_RID_FRAGTHRESH0		((UINT16)0xFC90)
+#define		HFA384x_RID_FRAGTHRESH1		((UINT16)0xFC91)
+#define		HFA384x_RID_FRAGTHRESH2		((UINT16)0xFC92)
+#define		HFA384x_RID_FRAGTHRESH3		((UINT16)0xFC93)
+#define		HFA384x_RID_FRAGTHRESH4		((UINT16)0xFC94)
+#define		HFA384x_RID_FRAGTHRESH5		((UINT16)0xFC95)
+#define		HFA384x_RID_FRAGTHRESH6		((UINT16)0xFC96)
+#define		HFA384x_RID_RTSTHRESH0		((UINT16)0xFC97)
+#define		HFA384x_RID_RTSTHRESH1		((UINT16)0xFC98)
+#define		HFA384x_RID_RTSTHRESH2		((UINT16)0xFC99)
+#define		HFA384x_RID_RTSTHRESH3		((UINT16)0xFC9A)
+#define		HFA384x_RID_RTSTHRESH4		((UINT16)0xFC9B)
+#define		HFA384x_RID_RTSTHRESH5		((UINT16)0xFC9C)
+#define		HFA384x_RID_RTSTHRESH6		((UINT16)0xFC9D)
+#define		HFA384x_RID_TXRATECNTL0		((UINT16)0xFC9E)
+#define		HFA384x_RID_TXRATECNTL1		((UINT16)0xFC9F)
+#define		HFA384x_RID_TXRATECNTL2		((UINT16)0xFCA0)
+#define		HFA384x_RID_TXRATECNTL3		((UINT16)0xFCA1)
+#define		HFA384x_RID_TXRATECNTL4		((UINT16)0xFCA2)
+#define		HFA384x_RID_TXRATECNTL5		((UINT16)0xFCA3)
+#define		HFA384x_RID_TXRATECNTL6		((UINT16)0xFCA4)
+
+/*--------------------------------------------------------------------
+Configuration RID Lengths: Network Param, Dynamic Config Entities
+  This is the length of JUST the DATA part of the RID (does not
+  include the len or code fields)
+--------------------------------------------------------------------*/
+/* TODO: fill in the rest of these */
+#define		HFA384x_RID_GROUPADDR_LEN	((UINT16)16 * WLAN_ADDR_LEN)
+#define		HFA384x_RID_CREATEIBSS_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL_LEN	((UINT16)4)
+#define		HFA384x_RID_PROMISCMODE_LEN	((UINT16)2)
+#define		HFA384x_RID_FRAGTHRESH0_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH1_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH2_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH3_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH4_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH5_LEN	((UINT16)0)
+#define		HFA384x_RID_FRAGTHRESH6_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH0_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH1_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH2_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH3_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH4_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH5_LEN	((UINT16)0)
+#define		HFA384x_RID_RTSTHRESH6_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL0_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL1_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL2_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL3_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL4_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL5_LEN	((UINT16)0)
+#define		HFA384x_RID_TXRATECNTL6_LEN	((UINT16)0)
+
+/*--------------------------------------------------------------------
+Configuration RIDs: Behavior Parameters
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_ITICKTIME		((UINT16)0xFCE0)
+
+/*--------------------------------------------------------------------
+Configuration RID Lengths: Behavior Parameters
+  This is the length of JUST the DATA part of the RID (does not
+  include the len or code fields)
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_ITICKTIME_LEN	((UINT16)2)
+
+/*----------------------------------------------------------------------
+Information RIDs: NIC Information
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_MAXLOADTIME		((UINT16)0xFD00)
+#define		HFA384x_RID_DOWNLOADBUFFER	((UINT16)0xFD01)
+#define		HFA384x_RID_PRIIDENTITY		((UINT16)0xFD02)
+#define		HFA384x_RID_PRISUPRANGE		((UINT16)0xFD03)
+#define		HFA384x_RID_PRI_CFIACTRANGES	((UINT16)0xFD04)
+#define		HFA384x_RID_NICSERIALNUMBER	((UINT16)0xFD0A)
+#define		HFA384x_RID_NICIDENTITY		((UINT16)0xFD0B)
+#define		HFA384x_RID_MFISUPRANGE		((UINT16)0xFD0C)
+#define		HFA384x_RID_CFISUPRANGE		((UINT16)0xFD0D)
+#define		HFA384x_RID_CHANNELLIST		((UINT16)0xFD10)
+#define		HFA384x_RID_REGULATORYDOMAINS	((UINT16)0xFD11)
+#define		HFA384x_RID_TEMPTYPE		((UINT16)0xFD12)
+#define		HFA384x_RID_CIS			((UINT16)0xFD13)
+#define		HFA384x_RID_STAIDENTITY		((UINT16)0xFD20)
+#define		HFA384x_RID_STASUPRANGE		((UINT16)0xFD21)
+#define		HFA384x_RID_STA_MFIACTRANGES	((UINT16)0xFD22)
+#define		HFA384x_RID_STA_CFIACTRANGES	((UINT16)0xFD23)
+#define		HFA384x_RID_BUILDSEQ		((UINT16)0xFFFE)
+#define		HFA384x_RID_FWID		((UINT16)0xFFFF)
+
+/*----------------------------------------------------------------------
+Information RID Lengths: NIC Information
+  This is the length of JUST the DATA part of the RID (does not
+  include the len or code fields)
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_MAXLOADTIME_LEN		((UINT16)0)
+#define		HFA384x_RID_DOWNLOADBUFFER_LEN		((UINT16)sizeof(hfa384x_downloadbuffer_t))
+#define		HFA384x_RID_PRIIDENTITY_LEN		((UINT16)8)
+#define		HFA384x_RID_PRISUPRANGE_LEN		((UINT16)10)
+#define		HFA384x_RID_CFIACTRANGES_LEN		((UINT16)10)
+#define		HFA384x_RID_NICSERIALNUMBER_LEN		((UINT16)12)
+#define		HFA384x_RID_NICIDENTITY_LEN		((UINT16)8)
+#define		HFA384x_RID_MFISUPRANGE_LEN		((UINT16)10)
+#define		HFA384x_RID_CFISUPRANGE_LEN		((UINT16)10)
+#define		HFA384x_RID_CHANNELLIST_LEN		((UINT16)0)
+#define		HFA384x_RID_REGULATORYDOMAINS_LEN	((UINT16)12)
+#define		HFA384x_RID_TEMPTYPE_LEN		((UINT16)0)
+#define		HFA384x_RID_CIS_LEN			((UINT16)480)
+#define		HFA384x_RID_STAIDENTITY_LEN		((UINT16)8)
+#define		HFA384x_RID_STASUPRANGE_LEN		((UINT16)10)
+#define		HFA384x_RID_MFIACTRANGES_LEN		((UINT16)10)
+#define		HFA384x_RID_CFIACTRANGES2_LEN		((UINT16)10)
+#define		HFA384x_RID_BUILDSEQ_LEN		((UINT16)sizeof(hfa384x_BuildSeq_t))
+#define		HFA384x_RID_FWID_LEN			((UINT16)sizeof(hfa384x_FWID_t))
+
+/*--------------------------------------------------------------------
+Information RIDs:  MAC Information
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_PORTSTATUS		((UINT16)0xFD40)
+#define		HFA384x_RID_CURRENTSSID		((UINT16)0xFD41)
+#define		HFA384x_RID_CURRENTBSSID	((UINT16)0xFD42)
+#define		HFA384x_RID_COMMSQUALITY	((UINT16)0xFD43)
+#define		HFA384x_RID_CURRENTTXRATE	((UINT16)0xFD44)
+#define		HFA384x_RID_CURRENTBCNINT	((UINT16)0xFD45)
+#define		HFA384x_RID_CURRENTSCALETHRESH	((UINT16)0xFD46)
+#define		HFA384x_RID_PROTOCOLRSPTIME	((UINT16)0xFD47)
+#define		HFA384x_RID_SHORTRETRYLIMIT	((UINT16)0xFD48)
+#define		HFA384x_RID_LONGRETRYLIMIT	((UINT16)0xFD49)
+#define		HFA384x_RID_MAXTXLIFETIME	((UINT16)0xFD4A)
+#define		HFA384x_RID_MAXRXLIFETIME	((UINT16)0xFD4B)
+#define		HFA384x_RID_CFPOLLABLE		((UINT16)0xFD4C)
+#define		HFA384x_RID_AUTHALGORITHMS	((UINT16)0xFD4D)
+#define		HFA384x_RID_PRIVACYOPTIMP	((UINT16)0xFD4F)
+#define		HFA384x_RID_DBMCOMMSQUALITY	((UINT16)0xFD51)
+#define		HFA384x_RID_CURRENTTXRATE1	((UINT16)0xFD80)
+#define		HFA384x_RID_CURRENTTXRATE2	((UINT16)0xFD81)
+#define		HFA384x_RID_CURRENTTXRATE3	((UINT16)0xFD82)
+#define		HFA384x_RID_CURRENTTXRATE4	((UINT16)0xFD83)
+#define		HFA384x_RID_CURRENTTXRATE5	((UINT16)0xFD84)
+#define		HFA384x_RID_CURRENTTXRATE6	((UINT16)0xFD85)
+#define		HFA384x_RID_OWNMACADDRESS	((UINT16)0xFD86)
+// #define	HFA384x_RID_PCFINFO		((UINT16)0xFD87)
+#define		HFA384x_RID_SCANRESULTS       	((UINT16)0xFD88) // NEW
+#define		HFA384x_RID_HOSTSCANRESULTS   	((UINT16)0xFD89) // NEW
+#define		HFA384x_RID_AUTHENTICATIONUSED	((UINT16)0xFD8A) // NEW
+#define		HFA384x_RID_ASSOCIATEFAILURE  	((UINT16)0xFD8D) // 1.8.0
+
+/*--------------------------------------------------------------------
+Information RID Lengths:  MAC Information
+  This is the length of JUST the DATA part of the RID (does not
+  include the len or code fields)
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_PORTSTATUS_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTSSID_LEN		((UINT16)34)
+#define		HFA384x_RID_CURRENTBSSID_LEN		((UINT16)WLAN_BSSID_LEN)
+#define		HFA384x_RID_COMMSQUALITY_LEN		((UINT16)sizeof(hfa384x_commsquality_t))
+#define		HFA384x_RID_DBMCOMMSQUALITY_LEN		((UINT16)sizeof(hfa384x_dbmcommsquality_t))
+#define		HFA384x_RID_CURRENTTXRATE_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTBCNINT_LEN		((UINT16)0)
+#define		HFA384x_RID_STACURSCALETHRESH_LEN	((UINT16)12)
+#define		HFA384x_RID_APCURSCALETHRESH_LEN	((UINT16)6)
+#define		HFA384x_RID_PROTOCOLRSPTIME_LEN		((UINT16)0)
+#define		HFA384x_RID_SHORTRETRYLIMIT_LEN		((UINT16)0)
+#define		HFA384x_RID_LONGRETRYLIMIT_LEN		((UINT16)0)
+#define		HFA384x_RID_MAXTXLIFETIME_LEN		((UINT16)0)
+#define		HFA384x_RID_MAXRXLIFETIME_LEN		((UINT16)0)
+#define		HFA384x_RID_CFPOLLABLE_LEN		((UINT16)0)
+#define		HFA384x_RID_AUTHALGORITHMS_LEN		((UINT16)4)
+#define		HFA384x_RID_PRIVACYOPTIMP_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTTXRATE1_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTTXRATE2_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTTXRATE3_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTTXRATE4_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTTXRATE5_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTTXRATE6_LEN		((UINT16)0)
+#define		HFA384x_RID_OWNMACADDRESS_LEN		((UINT16)6)
+#define		HFA384x_RID_PCFINFO_LEN			((UINT16)6)
+#define		HFA384x_RID_CNFAPPCFINFO_LEN		((UINT16)sizeof(hfa384x_PCFInfo_data_t))
+#define		HFA384x_RID_SCANREQUEST_LEN		((UINT16)sizeof(hfa384x_ScanRequest_data_t))
+#define		HFA384x_RID_JOINREQUEST_LEN		((UINT16)sizeof(hfa384x_JoinRequest_data_t))
+#define		HFA384x_RID_AUTHENTICATESTA_LEN		((UINT16)sizeof(hfa384x_authenticateStation_data_t))
+#define		HFA384x_RID_CHANNELINFOREQUEST_LEN	((UINT16)sizeof(hfa384x_ChannelInfoRequest_data_t))
+/*--------------------------------------------------------------------
+Information RIDs:  Modem Information
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_PHYTYPE		((UINT16)0xFDC0)
+#define		HFA384x_RID_CURRENTCHANNEL	((UINT16)0xFDC1)
+#define		HFA384x_RID_CURRENTPOWERSTATE	((UINT16)0xFDC2)
+#define		HFA384x_RID_CCAMODE		((UINT16)0xFDC3)
+#define		HFA384x_RID_SUPPORTEDDATARATES	((UINT16)0xFDC6)
+#define		HFA384x_RID_LFOSTATUS           ((UINT16)0xFDC7) // 1.7.1
+
+/*--------------------------------------------------------------------
+Information RID Lengths:  Modem Information
+  This is the length of JUST the DATA part of the RID (does not
+  include the len or code fields)
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_PHYTYPE_LEN			((UINT16)0)
+#define		HFA384x_RID_CURRENTCHANNEL_LEN		((UINT16)0)
+#define		HFA384x_RID_CURRENTPOWERSTATE_LEN	((UINT16)0)
+#define		HFA384x_RID_CCAMODE_LEN			((UINT16)0)
+#define		HFA384x_RID_SUPPORTEDDATARATES_LEN	((UINT16)10)
+
+/*--------------------------------------------------------------------
+API ENHANCEMENTS (NOT ALREADY IMPLEMENTED)
+--------------------------------------------------------------------*/
+#define		HFA384x_RID_CNFWEPDEFAULTKEYID	((UINT16)0xFC23)
+#define		HFA384x_RID_CNFWEPDEFAULTKEY0	((UINT16)0xFC24)
+#define		HFA384x_RID_CNFWEPDEFAULTKEY1	((UINT16)0xFC25)
+#define		HFA384x_RID_CNFWEPDEFAULTKEY2	((UINT16)0xFC26)
+#define		HFA384x_RID_CNFWEPDEFAULTKEY3	((UINT16)0xFC27)
+#define		HFA384x_RID_CNFWEPFLAGS		((UINT16)0xFC28)
+#define		HFA384x_RID_CNFWEPKEYMAPTABLE	((UINT16)0xFC29)
+#define		HFA384x_RID_CNFAUTHENTICATION	((UINT16)0xFC2A)
+#define		HFA384x_RID_CNFMAXASSOCSTATIONS	((UINT16)0xFC2B)
+#define		HFA384x_RID_CNFTXCONTROL	((UINT16)0xFC2C)
+#define		HFA384x_RID_CNFROAMINGMODE	((UINT16)0xFC2D)
+#define		HFA384x_RID_CNFHOSTAUTHASSOC	((UINT16)0xFC2E)
+#define		HFA384x_RID_CNFRCVCRCERROR	((UINT16)0xFC30)
+// #define		HFA384x_RID_CNFMMLIFE		((UINT16)0xFC31)
+#define		HFA384x_RID_CNFALTRETRYCNT	((UINT16)0xFC32)
+#define		HFA384x_RID_CNFAPBCNINT		((UINT16)0xFC33)
+#define		HFA384x_RID_CNFAPPCFINFO	((UINT16)0xFC34)
+#define		HFA384x_RID_CNFSTAPCFINFO	((UINT16)0xFC35)
+#define		HFA384x_RID_CNFPRIORITYQUSAGE	((UINT16)0xFC37)
+#define		HFA384x_RID_CNFTIMCTRL		((UINT16)0xFC40)
+#define		HFA384x_RID_CNFTHIRTY2TALLY	((UINT16)0xFC42)
+#define		HFA384x_RID_CNFENHSECURITY	((UINT16)0xFC43)
+#define		HFA384x_RID_CNFDBMADJUST  	((UINT16)0xFC46) // NEW
+#define		HFA384x_RID_CNFWPADATA       	((UINT16)0xFC48) // 1.7.0
+#define		HFA384x_RID_CNFPROPOGATIONDELAY	((UINT16)0xFC49) // 1.7.6
+#define		HFA384x_RID_CNFSHORTPREAMBLE	((UINT16)0xFCB0)
+#define		HFA384x_RID_CNFEXCLONGPREAMBLE	((UINT16)0xFCB1)
+#define		HFA384x_RID_CNFAUTHRSPTIMEOUT	((UINT16)0xFCB2)
+#define		HFA384x_RID_CNFBASICRATES	((UINT16)0xFCB3)
+#define		HFA384x_RID_CNFSUPPRATES	((UINT16)0xFCB4)
+#define		HFA384x_RID_CNFFALLBACKCTRL	((UINT16)0xFCB5) // NEW
+#define		HFA384x_RID_WEPKEYSTATUS   	((UINT16)0xFCB6) // NEW
+#define		HFA384x_RID_WEPKEYMAPINDEX 	((UINT16)0xFCB7) // NEW
+#define		HFA384x_RID_BROADCASTKEYID 	((UINT16)0xFCB8) // NEW
+#define		HFA384x_RID_ENTSECFLAGEYID 	((UINT16)0xFCB9) // NEW
+#define		HFA384x_RID_CNFPASSIVESCANCTRL	((UINT16)0xFCBA) // NEW STA
+#define		HFA384x_RID_CNFWPAHANDLING	((UINT16)0xFCBB) // 1.7.0
+#define		HFA384x_RID_MDCCONTROL        	((UINT16)0xFCBC) // 1.7.0/1.4.0
+#define		HFA384x_RID_MDCCOUNTRY        	((UINT16)0xFCBD) // 1.7.0/1.4.0
+#define		HFA384x_RID_TXPOWERMAX        	((UINT16)0xFCBE) // 1.7.0/1.4.0
+#define		HFA384x_RID_CNFLFOENBLED      	((UINT16)0xFCBF) // 1.6.3
+#define         HFA384x_RID_CAPINFO             ((UINT16)0xFCC0) // 1.7.0/1.3.7
+#define         HFA384x_RID_LISTENINTERVAL      ((UINT16)0xFCC1) // 1.7.0/1.3.7
+#define         HFA384x_RID_DIVERSITYENABLED    ((UINT16)0xFCC2) // 1.7.0/1.3.7
+#define         HFA384x_RID_LED_CONTROL         ((UINT16)0xFCC4) // 1.7.6
+#define         HFA384x_RID_HFO_DELAY           ((UINT16)0xFCC5) // 1.7.6
+#define         HFA384x_RID_DISSALOWEDBSSID     ((UINT16)0xFCC6) // 1.8.0
+#define		HFA384x_RID_SCANREQUEST		((UINT16)0xFCE1)
+#define		HFA384x_RID_JOINREQUEST		((UINT16)0xFCE2)
+#define		HFA384x_RID_AUTHENTICATESTA	((UINT16)0xFCE3)
+#define		HFA384x_RID_CHANNELINFOREQUEST	((UINT16)0xFCE4)
+#define		HFA384x_RID_HOSTSCAN          	((UINT16)0xFCE5) // NEW STA
+#define		HFA384x_RID_ASSOCIATESTA	((UINT16)0xFCE6)
+
+#define		HFA384x_RID_CNFWEPDEFAULTKEY_LEN	((UINT16)6)
+#define		HFA384x_RID_CNFWEP128DEFAULTKEY_LEN	((UINT16)14)
+#define		HFA384x_RID_CNFPRIOQUSAGE_LEN		((UINT16)4)
+/*--------------------------------------------------------------------
+PD Record codes
+--------------------------------------------------------------------*/
+#define HFA384x_PDR_PCB_PARTNUM		((UINT16)0x0001)
+#define HFA384x_PDR_PDAVER		((UINT16)0x0002)
+#define HFA384x_PDR_NIC_SERIAL		((UINT16)0x0003)
+#define HFA384x_PDR_MKK_MEASUREMENTS	((UINT16)0x0004)
+#define HFA384x_PDR_NIC_RAMSIZE		((UINT16)0x0005)
+#define HFA384x_PDR_MFISUPRANGE		((UINT16)0x0006)
+#define HFA384x_PDR_CFISUPRANGE		((UINT16)0x0007)
+#define HFA384x_PDR_NICID		((UINT16)0x0008)
+//#define HFA384x_PDR_REFDAC_MEASUREMENTS	((UINT16)0x0010)
+//#define HFA384x_PDR_VGDAC_MEASUREMENTS	((UINT16)0x0020)
+//#define HFA384x_PDR_LEVEL_COMP_MEASUREMENTS	((UINT16)0x0030)
+//#define HFA384x_PDR_MODEM_TRIMDAC_MEASUREMENTS	((UINT16)0x0040)
+//#define HFA384x_PDR_COREGA_HACK		((UINT16)0x00ff)
+#define HFA384x_PDR_MAC_ADDRESS		((UINT16)0x0101)
+//#define HFA384x_PDR_MKK_CALLNAME	((UINT16)0x0102)
+#define HFA384x_PDR_REGDOMAIN		((UINT16)0x0103)
+#define HFA384x_PDR_ALLOWED_CHANNEL	((UINT16)0x0104)
+#define HFA384x_PDR_DEFAULT_CHANNEL	((UINT16)0x0105)
+//#define HFA384x_PDR_PRIVACY_OPTION	((UINT16)0x0106)
+#define HFA384x_PDR_TEMPTYPE		((UINT16)0x0107)
+//#define HFA384x_PDR_REFDAC_SETUP	((UINT16)0x0110)
+//#define HFA384x_PDR_VGDAC_SETUP		((UINT16)0x0120)
+//#define HFA384x_PDR_LEVEL_COMP_SETUP	((UINT16)0x0130)
+//#define HFA384x_PDR_TRIMDAC_SETUP	((UINT16)0x0140)
+#define HFA384x_PDR_IFR_SETTING		((UINT16)0x0200)
+#define HFA384x_PDR_RFR_SETTING		((UINT16)0x0201)
+#define HFA384x_PDR_HFA3861_BASELINE	((UINT16)0x0202)
+#define HFA384x_PDR_HFA3861_SHADOW	((UINT16)0x0203)
+#define HFA384x_PDR_HFA3861_IFRF	((UINT16)0x0204)
+#define HFA384x_PDR_HFA3861_CHCALSP	((UINT16)0x0300)
+#define HFA384x_PDR_HFA3861_CHCALI	((UINT16)0x0301)
+#define HFA384x_PDR_MAX_TX_POWER  	((UINT16)0x0302)
+#define HFA384x_PDR_MASTER_CHAN_LIST	((UINT16)0x0303)
+#define HFA384x_PDR_3842_NIC_CONFIG	((UINT16)0x0400)
+#define HFA384x_PDR_USB_ID		((UINT16)0x0401)
+#define HFA384x_PDR_PCI_ID		((UINT16)0x0402)
+#define HFA384x_PDR_PCI_IFCONF		((UINT16)0x0403)
+#define HFA384x_PDR_PCI_PMCONF		((UINT16)0x0404)
+#define HFA384x_PDR_RFENRGY		((UINT16)0x0406)
+#define HFA384x_PDR_USB_POWER_TYPE      ((UINT16)0x0407)
+//#define HFA384x_PDR_UNKNOWN408		((UINT16)0x0408)
+#define HFA384x_PDR_USB_MAX_POWER	((UINT16)0x0409)
+#define HFA384x_PDR_USB_MANUFACTURER	((UINT16)0x0410)
+#define HFA384x_PDR_USB_PRODUCT  	((UINT16)0x0411)
+#define HFA384x_PDR_ANT_DIVERSITY   	((UINT16)0x0412)
+#define HFA384x_PDR_HFO_DELAY       	((UINT16)0x0413)
+#define HFA384x_PDR_SCALE_THRESH 	((UINT16)0x0414)
+
+#define HFA384x_PDR_HFA3861_MANF_TESTSP	((UINT16)0x0900)
+#define HFA384x_PDR_HFA3861_MANF_TESTI	((UINT16)0x0901)
+#define HFA384x_PDR_END_OF_PDA		((UINT16)0x0000)
+
+
+/*=============================================================*/
+/*------ Macros -----------------------------------------------*/
+
+/*--- Register ID macros ------------------------*/
+
+#define		HFA384x_CMD		HFA384x_CMD_OFF
+#define		HFA384x_PARAM0		HFA384x_PARAM0_OFF
+#define		HFA384x_PARAM1		HFA384x_PARAM1_OFF
+#define		HFA384x_PARAM2		HFA384x_PARAM2_OFF
+#define		HFA384x_STATUS		HFA384x_STATUS_OFF
+#define		HFA384x_RESP0		HFA384x_RESP0_OFF
+#define		HFA384x_RESP1		HFA384x_RESP1_OFF
+#define		HFA384x_RESP2		HFA384x_RESP2_OFF
+#define		HFA384x_INFOFID		HFA384x_INFOFID_OFF
+#define		HFA384x_RXFID		HFA384x_RXFID_OFF
+#define		HFA384x_ALLOCFID	HFA384x_ALLOCFID_OFF
+#define		HFA384x_TXCOMPLFID	HFA384x_TXCOMPLFID_OFF
+#define		HFA384x_SELECT0		HFA384x_SELECT0_OFF
+#define		HFA384x_OFFSET0		HFA384x_OFFSET0_OFF
+#define		HFA384x_DATA0		HFA384x_DATA0_OFF
+#define		HFA384x_SELECT1		HFA384x_SELECT1_OFF
+#define		HFA384x_OFFSET1		HFA384x_OFFSET1_OFF
+#define		HFA384x_DATA1		HFA384x_DATA1_OFF
+#define		HFA384x_EVSTAT		HFA384x_EVSTAT_OFF
+#define		HFA384x_INTEN		HFA384x_INTEN_OFF
+#define		HFA384x_EVACK		HFA384x_EVACK_OFF
+#define		HFA384x_CONTROL		HFA384x_CONTROL_OFF
+#define		HFA384x_SWSUPPORT0	HFA384x_SWSUPPORT0_OFF
+#define		HFA384x_SWSUPPORT1	HFA384x_SWSUPPORT1_OFF
+#define		HFA384x_SWSUPPORT2	HFA384x_SWSUPPORT2_OFF
+#define		HFA384x_AUXPAGE		HFA384x_AUXPAGE_OFF
+#define		HFA384x_AUXOFFSET	HFA384x_AUXOFFSET_OFF
+#define		HFA384x_AUXDATA		HFA384x_AUXDATA_OFF
+#define		HFA384x_PCICOR		HFA384x_PCICOR_OFF
+#define		HFA384x_PCIHCR		HFA384x_PCIHCR_OFF
+
+
+/*--- Register Test/Get/Set Field macros ------------------------*/
+
+#define		HFA384x_CMD_ISBUSY(value)		((UINT16)(((UINT16)value) & HFA384x_CMD_BUSY))
+#define		HFA384x_CMD_AINFO_GET(value)		((UINT16)(((UINT16)(value) & HFA384x_CMD_AINFO) >> 8))
+#define		HFA384x_CMD_AINFO_SET(value)		((UINT16)((UINT16)(value) << 8))
+#define		HFA384x_CMD_MACPORT_GET(value)		((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_MACPORT)))
+#define		HFA384x_CMD_MACPORT_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET(value))
+#define		HFA384x_CMD_ISRECL(value)		((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_RECL)))
+#define		HFA384x_CMD_RECL_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET(value))
+#define		HFA384x_CMD_QOS_GET(value)		((UINT16((((UINT16)(value))&((UINT16)0x3000)) >> 12))
+#define		HFA384x_CMD_QOS_SET(value)		((UINT16)((((UINT16)(value)) << 12) & 0x3000))
+#define		HFA384x_CMD_ISWRITE(value)		((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_WRITE)))
+#define		HFA384x_CMD_WRITE_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET((UINT16)value))
+#define		HFA384x_CMD_PROGMODE_GET(value)		((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_PROGMODE)))
+#define		HFA384x_CMD_PROGMODE_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET((UINT16)value))
+#define		HFA384x_CMD_CMDCODE_GET(value)		((UINT16)(((UINT16)(value)) & HFA384x_CMD_CMDCODE))
+#define		HFA384x_CMD_CMDCODE_SET(value)		((UINT16)(value))
+
+#define		HFA384x_STATUS_RESULT_GET(value)	((UINT16)((((UINT16)(value)) & HFA384x_STATUS_RESULT) >> 8))
+#define		HFA384x_STATUS_RESULT_SET(value)	(((UINT16)(value)) << 8)
+#define		HFA384x_STATUS_CMDCODE_GET(value)	(((UINT16)(value)) & HFA384x_STATUS_CMDCODE)
+#define		HFA384x_STATUS_CMDCODE_SET(value)	((UINT16)(value))
+
+#define		HFA384x_OFFSET_ISBUSY(value)		((UINT16)(((UINT16)(value)) & HFA384x_OFFSET_BUSY))
+#define		HFA384x_OFFSET_ISERR(value)		((UINT16)(((UINT16)(value)) & HFA384x_OFFSET_ERR))
+#define		HFA384x_OFFSET_DATAOFF_GET(value)	((UINT16)(((UINT16)(value)) & HFA384x_OFFSET_DATAOFF))
+#define		HFA384x_OFFSET_DATAOFF_SET(value)	((UINT16)(value))
+
+#define		HFA384x_EVSTAT_ISTICK(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_TICK))
+#define		HFA384x_EVSTAT_ISWTERR(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_WTERR))
+#define		HFA384x_EVSTAT_ISINFDROP(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_INFDROP))
+#define		HFA384x_EVSTAT_ISINFO(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_INFO))
+#define		HFA384x_EVSTAT_ISDTIM(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_DTIM))
+#define		HFA384x_EVSTAT_ISCMD(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_CMD))
+#define		HFA384x_EVSTAT_ISALLOC(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_ALLOC))
+#define		HFA384x_EVSTAT_ISTXEXC(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_TXEXC))
+#define		HFA384x_EVSTAT_ISTX(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_TX))
+#define		HFA384x_EVSTAT_ISRX(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVSTAT_RX))
+
+#define		HFA384x_EVSTAT_ISBAP_OP(value)		((UINT16)(((UINT16)(value)) & HFA384x_INT_BAP_OP))
+
+#define		HFA384x_INTEN_ISTICK(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_TICK))
+#define		HFA384x_INTEN_TICK_SET(value)		((UINT16)(((UINT16)(value)) << 15))
+#define		HFA384x_INTEN_ISWTERR(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_WTERR))
+#define		HFA384x_INTEN_WTERR_SET(value)		((UINT16)(((UINT16)(value)) << 14))
+#define		HFA384x_INTEN_ISINFDROP(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_INFDROP))
+#define		HFA384x_INTEN_INFDROP_SET(value)	((UINT16)(((UINT16)(value)) << 13))
+#define		HFA384x_INTEN_ISINFO(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_INFO))
+#define		HFA384x_INTEN_INFO_SET(value)		((UINT16)(((UINT16)(value)) << 7))
+#define		HFA384x_INTEN_ISDTIM(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_DTIM))
+#define		HFA384x_INTEN_DTIM_SET(value)		((UINT16)(((UINT16)(value)) << 5))
+#define		HFA384x_INTEN_ISCMD(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_CMD))
+#define		HFA384x_INTEN_CMD_SET(value)		((UINT16)(((UINT16)(value)) << 4))
+#define		HFA384x_INTEN_ISALLOC(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_ALLOC))
+#define		HFA384x_INTEN_ALLOC_SET(value)		((UINT16)(((UINT16)(value)) << 3))
+#define		HFA384x_INTEN_ISTXEXC(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_TXEXC))
+#define		HFA384x_INTEN_TXEXC_SET(value)		((UINT16)(((UINT16)(value)) << 2))
+#define		HFA384x_INTEN_ISTX(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_TX))
+#define		HFA384x_INTEN_TX_SET(value)		((UINT16)(((UINT16)(value)) << 1))
+#define		HFA384x_INTEN_ISRX(value)		((UINT16)(((UINT16)(value)) & HFA384x_INTEN_RX))
+#define		HFA384x_INTEN_RX_SET(value)		((UINT16)(((UINT16)(value)) << 0))
+
+#define		HFA384x_EVACK_ISTICK(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_TICK))
+#define		HFA384x_EVACK_TICK_SET(value)		((UINT16)(((UINT16)(value)) << 15))
+#define		HFA384x_EVACK_ISWTERR(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_WTERR))
+#define		HFA384x_EVACK_WTERR_SET(value)		((UINT16)(((UINT16)(value)) << 14))
+#define		HFA384x_EVACK_ISINFDROP(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_INFDROP))
+#define		HFA384x_EVACK_INFDROP_SET(value)	((UINT16)(((UINT16)(value)) << 13))
+#define		HFA384x_EVACK_ISINFO(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_INFO))
+#define		HFA384x_EVACK_INFO_SET(value)		((UINT16)(((UINT16)(value)) << 7))
+#define		HFA384x_EVACK_ISDTIM(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_DTIM))
+#define		HFA384x_EVACK_DTIM_SET(value)		((UINT16)(((UINT16)(value)) << 5))
+#define		HFA384x_EVACK_ISCMD(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_CMD))
+#define		HFA384x_EVACK_CMD_SET(value)		((UINT16)(((UINT16)(value)) << 4))
+#define		HFA384x_EVACK_ISALLOC(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_ALLOC))
+#define		HFA384x_EVACK_ALLOC_SET(value)		((UINT16)(((UINT16)(value)) << 3))
+#define		HFA384x_EVACK_ISTXEXC(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_TXEXC))
+#define		HFA384x_EVACK_TXEXC_SET(value)		((UINT16)(((UINT16)(value)) << 2))
+#define		HFA384x_EVACK_ISTX(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_TX))
+#define		HFA384x_EVACK_TX_SET(value)		((UINT16)(((UINT16)(value)) << 1))
+#define		HFA384x_EVACK_ISRX(value)		((UINT16)(((UINT16)(value)) & HFA384x_EVACK_RX))
+#define		HFA384x_EVACK_RX_SET(value)		((UINT16)(((UINT16)(value)) << 0))
+
+#define		HFA384x_CONTROL_AUXEN_SET(value)	((UINT16)(((UINT16)(value)) << 14))
+#define		HFA384x_CONTROL_AUXEN_GET(value)	((UINT16)(((UINT16)(value)) >> 14))
+
+/* Byte Order */
+#ifdef __KERNEL__
+#define hfa384x2host_16(n)	(__le16_to_cpu((UINT16)(n)))
+#define hfa384x2host_32(n)	(__le32_to_cpu((UINT32)(n)))
+#define host2hfa384x_16(n)	(__cpu_to_le16((UINT16)(n)))
+#define host2hfa384x_32(n)	(__cpu_to_le32((UINT32)(n)))
+#endif
+
+/* Host Maintained State Info */
+#define HFA384x_STATE_PREINIT	0
+#define HFA384x_STATE_INIT	1
+#define HFA384x_STATE_RUNNING	2
+
+/*=============================================================*/
+/*------ Types and their related constants --------------------*/
+
+#define HFA384x_HOSTAUTHASSOC_HOSTAUTH   BIT0
+#define HFA384x_HOSTAUTHASSOC_HOSTASSOC  BIT1
+
+#define HFA384x_WHAHANDLING_DISABLED     0
+#define HFA384x_WHAHANDLING_PASSTHROUGH  BIT1
+
+/*-------------------------------------------------------------*/
+/* Commonly used basic types */
+typedef struct hfa384x_bytestr
+{
+	UINT16	len;
+	UINT8	data[0];
+} __WLAN_ATTRIB_PACK__ hfa384x_bytestr_t;
+
+typedef struct hfa384x_bytestr32
+{
+	UINT16	len;
+	UINT8	data[32];
+} __WLAN_ATTRIB_PACK__ hfa384x_bytestr32_t;
+
+/*--------------------------------------------------------------------
+Configuration Record Structures:
+	Network Parameters, Static Configuration Entities
+--------------------------------------------------------------------*/
+/* Prototype structure: all configuration record structures start with
+these members */
+
+typedef struct hfa384x_record
+{
+	UINT16	reclen;
+	UINT16	rid;
+} __WLAN_ATTRIB_PACK__ hfa384x_rec_t;
+
+typedef struct hfa384x_record16
+{
+	UINT16	reclen;
+	UINT16	rid;
+	UINT16	val;
+} __WLAN_ATTRIB_PACK__ hfa384x_rec16_t;
+
+typedef struct hfa384x_record32
+{
+	UINT16	reclen;
+	UINT16	rid;
+	UINT32	val;
+} __WLAN_ATTRIB_PACK__ hfa384x_rec32;
+
+/*-- Hardware/Firmware Component Information ----------*/
+typedef struct hfa384x_compident
+{
+	UINT16	id;
+	UINT16	variant;
+	UINT16	major;
+	UINT16	minor;
+} __WLAN_ATTRIB_PACK__ hfa384x_compident_t;
+
+typedef struct hfa384x_caplevel
+{
+	UINT16	role;
+	UINT16	id;
+	UINT16	variant;
+	UINT16	bottom;
+	UINT16	top;
+} __WLAN_ATTRIB_PACK__ hfa384x_caplevel_t;
+
+/*-- Configuration Record: cnfPortType --*/
+typedef struct hfa384x_cnfPortType
+{
+	UINT16	cnfPortType;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfPortType_t;
+
+/*-- Configuration Record: cnfOwnMACAddress --*/
+typedef struct hfa384x_cnfOwnMACAddress
+{
+	UINT8	cnfOwnMACAddress[6];
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfOwnMACAddress_t;
+
+/*-- Configuration Record: cnfDesiredSSID --*/
+typedef struct hfa384x_cnfDesiredSSID
+{
+	UINT8	cnfDesiredSSID[34];
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfDesiredSSID_t;
+
+/*-- Configuration Record: cnfOwnChannel --*/
+typedef struct hfa384x_cnfOwnChannel
+{
+	UINT16	cnfOwnChannel;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfOwnChannel_t;
+
+/*-- Configuration Record: cnfOwnSSID --*/
+typedef struct hfa384x_cnfOwnSSID
+{
+	UINT8	cnfOwnSSID[34];
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfOwnSSID_t;
+
+/*-- Configuration Record: cnfOwnATIMWindow --*/
+typedef struct hfa384x_cnfOwnATIMWindow
+{
+	UINT16	cnfOwnATIMWindow;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfOwnATIMWindow_t;
+
+/*-- Configuration Record: cnfSystemScale --*/
+typedef struct hfa384x_cnfSystemScale
+{
+	UINT16	cnfSystemScale;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfSystemScale_t;
+
+/*-- Configuration Record: cnfMaxDataLength --*/
+typedef struct hfa384x_cnfMaxDataLength
+{
+	UINT16	cnfMaxDataLength;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfMaxDataLength_t;
+
+/*-- Configuration Record: cnfWDSAddress --*/
+typedef struct hfa384x_cnfWDSAddress
+{
+	UINT8	cnfWDSAddress[6];
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfWDSAddress_t;
+
+/*-- Configuration Record: cnfPMEnabled --*/
+typedef struct hfa384x_cnfPMEnabled
+{
+	UINT16	cnfPMEnabled;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfPMEnabled_t;
+
+/*-- Configuration Record: cnfPMEPS --*/
+typedef struct hfa384x_cnfPMEPS
+{
+	UINT16	cnfPMEPS;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfPMEPS_t;
+
+/*-- Configuration Record: cnfMulticastReceive --*/
+typedef struct hfa384x_cnfMulticastReceive
+{
+	UINT16	cnfMulticastReceive;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfMulticastReceive_t;
+
+/*-- Configuration Record: cnfAuthentication --*/
+#define HFA384x_CNFAUTHENTICATION_OPENSYSTEM	0x0001
+#define HFA384x_CNFAUTHENTICATION_SHAREDKEY	0x0002
+#define HFA384x_CNFAUTHENTICATION_LEAP     	0x0004
+
+/*-- Configuration Record: cnfMaxSleepDuration --*/
+typedef struct hfa384x_cnfMaxSleepDuration
+{
+	UINT16	cnfMaxSleepDuration;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfMaxSleepDuration_t;
+
+/*-- Configuration Record: cnfPMHoldoverDuration --*/
+typedef struct hfa384x_cnfPMHoldoverDuration
+{
+	UINT16	cnfPMHoldoverDuration;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfPMHoldoverDuration_t;
+
+/*-- Configuration Record: cnfOwnName --*/
+typedef struct hfa384x_cnfOwnName
+{
+	UINT8	cnfOwnName[34];
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfOwnName_t;
+
+/*-- Configuration Record: cnfOwnDTIMPeriod --*/
+typedef struct hfa384x_cnfOwnDTIMPeriod
+{
+	UINT16	cnfOwnDTIMPeriod;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfOwnDTIMPeriod_t;
+
+/*-- Configuration Record: cnfWDSAddress --*/
+typedef struct hfa384x_cnfWDSAddressN
+{
+	UINT8	cnfWDSAddress[6];
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfWDSAddressN_t;
+
+/*-- Configuration Record: cnfMulticastPMBuffering --*/
+typedef struct hfa384x_cnfMulticastPMBuffering
+{
+	UINT16	cnfMulticastPMBuffering;
+} __WLAN_ATTRIB_PACK__ hfa384x_cnfMulticastPMBuffering_t;
+
+/*--------------------------------------------------------------------
+Configuration Record Structures:
+	Network Parameters, Dynamic Configuration Entities
+--------------------------------------------------------------------*/
+
+/*-- Configuration Record: GroupAddresses --*/
+typedef struct hfa384x_GroupAddresses
+{
+	UINT8	MACAddress[16][6];
+} __WLAN_ATTRIB_PACK__ hfa384x_GroupAddresses_t;
+
+/*-- Configuration Record: CreateIBSS --*/
+typedef struct hfa384x_CreateIBSS
+{
+	UINT16	CreateIBSS;
+} __WLAN_ATTRIB_PACK__ hfa384x_CreateIBSS_t;
+
+#define HFA384x_CREATEIBSS_JOINCREATEIBSS          0
+#define HFA384x_CREATEIBSS_JOINESS_JOINCREATEIBSS  1
+#define HFA384x_CREATEIBSS_JOINIBSS                2
+#define HFA384x_CREATEIBSS_JOINESS_JOINIBSS        3
+
+/*-- Configuration Record: FragmentationThreshold --*/
+typedef struct hfa384x_FragmentationThreshold
+{
+	UINT16	FragmentationThreshold;
+} __WLAN_ATTRIB_PACK__ hfa384x_FragmentationThreshold_t;
+
+/*-- Configuration Record: RTSThreshold --*/
+typedef struct hfa384x_RTSThreshold
+{
+	UINT16	RTSThreshold;
+} __WLAN_ATTRIB_PACK__ hfa384x_RTSThreshold_t;
+
+/*-- Configuration Record: TxRateControl --*/
+typedef struct hfa384x_TxRateControl
+{
+	UINT16	TxRateControl;
+} __WLAN_ATTRIB_PACK__ hfa384x_TxRateControl_t;
+
+/*-- Configuration Record: PromiscuousMode --*/
+typedef struct hfa384x_PromiscuousMode
+{
+	UINT16	PromiscuousMode;
+} __WLAN_ATTRIB_PACK__ hfa384x_PromiscuousMode_t;
+
+/*-- Configuration Record: ScanRequest (data portion only) --*/
+typedef struct hfa384x_ScanRequest_data
+{
+	UINT16	channelList;
+	UINT16	txRate;
+} __WLAN_ATTRIB_PACK__ hfa384x_ScanRequest_data_t;
+
+/*-- Configuration Record: HostScanRequest (data portion only) --*/
+typedef struct hfa384x_HostScanRequest_data
+{
+	UINT16	channelList;
+	UINT16	txRate;
+	hfa384x_bytestr32_t ssid;
+} __WLAN_ATTRIB_PACK__ hfa384x_HostScanRequest_data_t;
+
+/*-- Configuration Record: JoinRequest (data portion only) --*/
+typedef struct hfa384x_JoinRequest_data
+{
+	UINT8	bssid[WLAN_BSSID_LEN];
+	UINT16	channel;
+} __WLAN_ATTRIB_PACK__ hfa384x_JoinRequest_data_t;
+
+/*-- Configuration Record: authenticateStation (data portion only) --*/
+typedef struct hfa384x_authenticateStation_data
+{
+	UINT8	address[WLAN_ADDR_LEN];
+	UINT16	status;
+	UINT16	algorithm;
+} __WLAN_ATTRIB_PACK__ hfa384x_authenticateStation_data_t;
+
+/*-- Configuration Record: associateStation (data portion only) --*/
+typedef struct hfa384x_associateStation_data
+{
+	UINT8	address[WLAN_ADDR_LEN];
+	UINT16	status;
+	UINT16	type;
+} __WLAN_ATTRIB_PACK__ hfa384x_associateStation_data_t;
+
+/*-- Configuration Record: ChannelInfoRequest (data portion only) --*/
+typedef struct hfa384x_ChannelInfoRequest_data
+{
+	UINT16	channelList;
+	UINT16	channelDwellTime;
+} __WLAN_ATTRIB_PACK__ hfa384x_ChannelInfoRequest_data_t;
+
+/*-- Configuration Record: WEPKeyMapping (data portion only) --*/
+typedef struct hfa384x_WEPKeyMapping
+{
+	UINT8	address[WLAN_ADDR_LEN];
+	UINT16	key_index;
+	UINT8 	key[16];
+	UINT8 	mic_transmit_key[4];
+	UINT8 	mic_receive_key[4];
+} __WLAN_ATTRIB_PACK__ hfa384x_WEPKeyMapping_t;
+
+/*-- Configuration Record: WPAData       (data portion only) --*/
+typedef struct hfa384x_WPAData
+{
+	UINT16	datalen;
+        UINT8 	data[0]; // max 80
+} __WLAN_ATTRIB_PACK__ hfa384x_WPAData_t;
+
+/*--------------------------------------------------------------------
+Configuration Record Structures: Behavior Parameters
+--------------------------------------------------------------------*/
+
+/*-- Configuration Record: TickTime --*/
+typedef struct hfa384x_TickTime
+{
+	UINT16	TickTime;
+} __WLAN_ATTRIB_PACK__ hfa384x_TickTime_t;
+
+/*--------------------------------------------------------------------
+Information Record Structures: NIC Information
+--------------------------------------------------------------------*/
+
+/*-- Information Record: MaxLoadTime --*/
+typedef struct hfa384x_MaxLoadTime
+{
+	UINT16	MaxLoadTime;
+} __WLAN_ATTRIB_PACK__ hfa384x_MaxLoadTime_t;
+
+/*-- Information Record: DownLoadBuffer --*/
+/* NOTE: The page and offset are in AUX format */
+typedef struct hfa384x_downloadbuffer
+{
+	UINT16	page;
+	UINT16	offset;
+	UINT16	len;
+} __WLAN_ATTRIB_PACK__ hfa384x_downloadbuffer_t;
+
+/*-- Information Record: PRIIdentity --*/
+typedef struct hfa384x_PRIIdentity
+{
+	UINT16	PRICompID;
+	UINT16	PRIVariant;
+	UINT16	PRIMajorVersion;
+	UINT16	PRIMinorVersion;
+} __WLAN_ATTRIB_PACK__ hfa384x_PRIIdentity_t;
+
+/*-- Information Record: PRISupRange --*/
+typedef struct hfa384x_PRISupRange
+{
+	UINT16	PRIRole;
+	UINT16	PRIID;
+	UINT16	PRIVariant;
+	UINT16	PRIBottom;
+	UINT16	PRITop;
+} __WLAN_ATTRIB_PACK__ hfa384x_PRISupRange_t;
+
+/*-- Information Record: CFIActRanges --*/
+typedef struct hfa384x_CFIActRanges
+{
+	UINT16	CFIRole;
+	UINT16	CFIID;
+	UINT16	CFIVariant;
+	UINT16	CFIBottom;
+	UINT16	CFITop;
+} __WLAN_ATTRIB_PACK__ hfa384x_CFIActRanges_t;
+
+/*-- Information Record: NICSerialNumber --*/
+typedef struct hfa384x_NICSerialNumber
+{
+	UINT8	NICSerialNumber[12];
+} __WLAN_ATTRIB_PACK__ hfa384x_NICSerialNumber_t;
+
+/*-- Information Record: NICIdentity --*/
+typedef struct hfa384x_NICIdentity
+{
+	UINT16	NICCompID;
+	UINT16	NICVariant;
+	UINT16	NICMajorVersion;
+	UINT16	NICMinorVersion;
+} __WLAN_ATTRIB_PACK__ hfa384x_NICIdentity_t;
+
+/*-- Information Record: MFISupRange --*/
+typedef struct hfa384x_MFISupRange
+{
+	UINT16	MFIRole;
+	UINT16	MFIID;
+	UINT16	MFIVariant;
+	UINT16	MFIBottom;
+	UINT16	MFITop;
+} __WLAN_ATTRIB_PACK__ hfa384x_MFISupRange_t;
+
+/*-- Information Record: CFISupRange --*/
+typedef struct hfa384x_CFISupRange
+{
+	UINT16	CFIRole;
+	UINT16	CFIID;
+	UINT16	CFIVariant;
+	UINT16	CFIBottom;
+	UINT16	CFITop;
+} __WLAN_ATTRIB_PACK__ hfa384x_CFISupRange_t;
+
+/*-- Information Record: BUILDSEQ:BuildSeq --*/
+typedef struct hfa384x_BuildSeq {
+	UINT16	primary;
+	UINT16	secondary;
+} __WLAN_ATTRIB_PACK__ hfa384x_BuildSeq_t;
+
+/*-- Information Record: FWID --*/
+#define HFA384x_FWID_LEN	14
+typedef struct hfa384x_FWID {
+	UINT8	primary[HFA384x_FWID_LEN];
+	UINT8	secondary[HFA384x_FWID_LEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_FWID_t;
+
+/*-- Information Record: ChannelList --*/
+typedef struct hfa384x_ChannelList
+{
+	UINT16	ChannelList;
+} __WLAN_ATTRIB_PACK__ hfa384x_ChannelList_t;
+
+/*-- Information Record: RegulatoryDomains --*/
+typedef struct hfa384x_RegulatoryDomains
+{
+	UINT8	RegulatoryDomains[12];
+} __WLAN_ATTRIB_PACK__ hfa384x_RegulatoryDomains_t;
+
+/*-- Information Record: TempType --*/
+typedef struct hfa384x_TempType
+{
+	UINT16	TempType;
+} __WLAN_ATTRIB_PACK__ hfa384x_TempType_t;
+
+/*-- Information Record: CIS --*/
+typedef struct hfa384x_CIS
+{
+	UINT8	CIS[480];
+} __WLAN_ATTRIB_PACK__ hfa384x_CIS_t;
+
+/*-- Information Record: STAIdentity --*/
+typedef struct hfa384x_STAIdentity
+{
+	UINT16	STACompID;
+	UINT16	STAVariant;
+	UINT16	STAMajorVersion;
+	UINT16	STAMinorVersion;
+} __WLAN_ATTRIB_PACK__ hfa384x_STAIdentity_t;
+
+/*-- Information Record: STASupRange --*/
+typedef struct hfa384x_STASupRange
+{
+	UINT16	STARole;
+	UINT16	STAID;
+	UINT16	STAVariant;
+	UINT16	STABottom;
+	UINT16	STATop;
+} __WLAN_ATTRIB_PACK__ hfa384x_STASupRange_t;
+
+/*-- Information Record: MFIActRanges --*/
+typedef struct hfa384x_MFIActRanges
+{
+	UINT16	MFIRole;
+	UINT16	MFIID;
+	UINT16	MFIVariant;
+	UINT16	MFIBottom;
+	UINT16	MFITop;
+} __WLAN_ATTRIB_PACK__ hfa384x_MFIActRanges_t;
+
+/*--------------------------------------------------------------------
+Information Record Structures: NIC Information
+--------------------------------------------------------------------*/
+
+/*-- Information Record: PortStatus --*/
+typedef struct hfa384x_PortStatus
+{
+	UINT16	PortStatus;
+} __WLAN_ATTRIB_PACK__ hfa384x_PortStatus_t;
+
+#define HFA384x_PSTATUS_DISABLED	((UINT16)1)
+#define HFA384x_PSTATUS_SEARCHING	((UINT16)2)
+#define HFA384x_PSTATUS_CONN_IBSS	((UINT16)3)
+#define HFA384x_PSTATUS_CONN_ESS	((UINT16)4)
+#define HFA384x_PSTATUS_OUTOFRANGE	((UINT16)5)
+#define HFA384x_PSTATUS_CONN_WDS	((UINT16)6)
+
+/*-- Information Record: CurrentSSID --*/
+typedef struct hfa384x_CurrentSSID
+{
+	UINT8	CurrentSSID[34];
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentSSID_t;
+
+/*-- Information Record: CurrentBSSID --*/
+typedef struct hfa384x_CurrentBSSID
+{
+	UINT8	CurrentBSSID[6];
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentBSSID_t;
+
+/*-- Information Record: commsquality --*/
+typedef struct hfa384x_commsquality
+{
+	UINT16	CQ_currBSS;
+	UINT16	ASL_currBSS;
+	UINT16	ANL_currFC;
+} __WLAN_ATTRIB_PACK__ hfa384x_commsquality_t;
+
+/*-- Information Record: dmbcommsquality --*/
+typedef struct hfa384x_dbmcommsquality
+{
+	UINT16	CQdbm_currBSS;
+	UINT16	ASLdbm_currBSS;
+	UINT16	ANLdbm_currFC;
+} __WLAN_ATTRIB_PACK__ hfa384x_dbmcommsquality_t;
+
+/*-- Information Record: CurrentTxRate --*/
+typedef struct hfa384x_CurrentTxRate
+{
+	UINT16	CurrentTxRate;
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentTxRate_t;
+
+/*-- Information Record: CurrentBeaconInterval --*/
+typedef struct hfa384x_CurrentBeaconInterval
+{
+	UINT16	CurrentBeaconInterval;
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentBeaconInterval_t;
+
+/*-- Information Record: CurrentScaleThresholds --*/
+typedef struct hfa384x_CurrentScaleThresholds
+{
+	UINT16	EnergyDetectThreshold;
+	UINT16	CarrierDetectThreshold;
+	UINT16	DeferDetectThreshold;
+	UINT16	CellSearchThreshold; /* Stations only */
+	UINT16	DeadSpotThreshold; /* Stations only */
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentScaleThresholds_t;
+
+/*-- Information Record: ProtocolRspTime --*/
+typedef struct hfa384x_ProtocolRspTime
+{
+	UINT16	ProtocolRspTime;
+} __WLAN_ATTRIB_PACK__ hfa384x_ProtocolRspTime_t;
+
+/*-- Information Record: ShortRetryLimit --*/
+typedef struct hfa384x_ShortRetryLimit
+{
+	UINT16	ShortRetryLimit;
+} __WLAN_ATTRIB_PACK__ hfa384x_ShortRetryLimit_t;
+
+/*-- Information Record: LongRetryLimit --*/
+typedef struct hfa384x_LongRetryLimit
+{
+	UINT16	LongRetryLimit;
+} __WLAN_ATTRIB_PACK__ hfa384x_LongRetryLimit_t;
+
+/*-- Information Record: MaxTransmitLifetime --*/
+typedef struct hfa384x_MaxTransmitLifetime
+{
+	UINT16	MaxTransmitLifetime;
+} __WLAN_ATTRIB_PACK__ hfa384x_MaxTransmitLifetime_t;
+
+/*-- Information Record: MaxReceiveLifetime --*/
+typedef struct hfa384x_MaxReceiveLifetime
+{
+	UINT16	MaxReceiveLifetime;
+} __WLAN_ATTRIB_PACK__ hfa384x_MaxReceiveLifetime_t;
+
+/*-- Information Record: CFPollable --*/
+typedef struct hfa384x_CFPollable
+{
+	UINT16	CFPollable;
+} __WLAN_ATTRIB_PACK__ hfa384x_CFPollable_t;
+
+/*-- Information Record: AuthenticationAlgorithms --*/
+typedef struct hfa384x_AuthenticationAlgorithms
+{
+	UINT16	AuthenticationType;
+	UINT16	TypeEnabled;
+} __WLAN_ATTRIB_PACK__ hfa384x_AuthenticationAlgorithms_t;
+
+/*-- Information Record: AuthenticationAlgorithms
+(data only --*/
+typedef struct hfa384x_AuthenticationAlgorithms_data
+{
+	UINT16	AuthenticationType;
+	UINT16	TypeEnabled;
+} __WLAN_ATTRIB_PACK__ hfa384x_AuthenticationAlgorithms_data_t;
+
+/*-- Information Record: PrivacyOptionImplemented --*/
+typedef struct hfa384x_PrivacyOptionImplemented
+{
+	UINT16	PrivacyOptionImplemented;
+} __WLAN_ATTRIB_PACK__ hfa384x_PrivacyOptionImplemented_t;
+
+/*-- Information Record: OwnMACAddress --*/
+typedef struct hfa384x_OwnMACAddress
+{
+	UINT8	OwnMACAddress[6];
+} __WLAN_ATTRIB_PACK__ hfa384x_OwnMACAddress_t;
+
+/*-- Information Record: PCFInfo --*/
+typedef struct hfa384x_PCFInfo
+{
+	UINT16	MediumOccupancyLimit;
+	UINT16	CFPPeriod;
+	UINT16	CFPMaxDuration;
+	UINT16	CFPFlags;
+} __WLAN_ATTRIB_PACK__ hfa384x_PCFInfo_t;
+
+/*-- Information Record: PCFInfo (data portion only) --*/
+typedef struct hfa384x_PCFInfo_data
+{
+	UINT16	MediumOccupancyLimit;
+	UINT16	CFPPeriod;
+	UINT16	CFPMaxDuration;
+	UINT16	CFPFlags;
+} __WLAN_ATTRIB_PACK__ hfa384x_PCFInfo_data_t;
+
+/*--------------------------------------------------------------------
+Information Record Structures: Modem Information Records
+--------------------------------------------------------------------*/
+
+/*-- Information Record: PHYType --*/
+typedef struct hfa384x_PHYType
+{
+	UINT16	PHYType;
+} __WLAN_ATTRIB_PACK__ hfa384x_PHYType_t;
+
+/*-- Information Record: CurrentChannel --*/
+typedef struct hfa384x_CurrentChannel
+{
+	UINT16	CurrentChannel;
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentChannel_t;
+
+/*-- Information Record: CurrentPowerState --*/
+typedef struct hfa384x_CurrentPowerState
+{
+	UINT16	CurrentPowerState;
+} __WLAN_ATTRIB_PACK__ hfa384x_CurrentPowerState_t;
+
+/*-- Information Record: CCAMode --*/
+typedef struct hfa384x_CCAMode
+{
+	UINT16	CCAMode;
+} __WLAN_ATTRIB_PACK__ hfa384x_CCAMode_t;
+
+/*-- Information Record: SupportedDataRates --*/
+typedef struct hfa384x_SupportedDataRates
+{
+	UINT8	SupportedDataRates[10];
+} __WLAN_ATTRIB_PACK__ hfa384x_SupportedDataRates_t;
+
+/*-- Information Record: LFOStatus --*/
+typedef struct hfa384x_LFOStatus
+{
+	UINT16  TestResults;
+	UINT16  LFOResult;
+	UINT16  VRHFOResult;
+} __WLAN_ATTRIB_PACK__ hfa384x_LFOStatus_t;
+
+#define HFA384x_TESTRESULT_ALLPASSED    BIT0
+#define HFA384x_TESTRESULT_LFO_FAIL     BIT1
+#define HFA384x_TESTRESULT_VR_HF0_FAIL  BIT2
+#define HFA384x_HOST_FIRM_COORDINATE    BIT7
+#define HFA384x_TESTRESULT_COORDINATE   BIT15
+
+/*-- Information Record: LEDControl --*/
+typedef struct hfa384x_LEDControl
+{
+	UINT16  searching_on;
+	UINT16  searching_off;
+	UINT16  assoc_on;
+	UINT16  assoc_off;
+	UINT16  activity;
+} __WLAN_ATTRIB_PACK__ hfa384x_LEDControl_t;
+
+/*--------------------------------------------------------------------
+                 FRAME DESCRIPTORS AND FRAME STRUCTURES
+
+FRAME DESCRIPTORS: Offsets
+
+----------------------------------------------------------------------
+Control Info (offset 44-51)
+--------------------------------------------------------------------*/
+#define		HFA384x_FD_STATUS_OFF			((UINT16)0x44)
+#define		HFA384x_FD_TIME_OFF			((UINT16)0x46)
+#define		HFA384x_FD_SWSUPPORT_OFF		((UINT16)0x4A)
+#define		HFA384x_FD_SILENCE_OFF			((UINT16)0x4A)
+#define		HFA384x_FD_SIGNAL_OFF			((UINT16)0x4B)
+#define		HFA384x_FD_RATE_OFF			((UINT16)0x4C)
+#define		HFA384x_FD_RXFLOW_OFF			((UINT16)0x4D)
+#define		HFA384x_FD_RESERVED_OFF			((UINT16)0x4E)
+#define		HFA384x_FD_TXCONTROL_OFF		((UINT16)0x50)
+/*--------------------------------------------------------------------
+802.11 Header (offset 52-6B)
+--------------------------------------------------------------------*/
+#define		HFA384x_FD_FRAMECONTROL_OFF		((UINT16)0x52)
+#define		HFA384x_FD_DURATIONID_OFF		((UINT16)0x54)
+#define		HFA384x_FD_ADDRESS1_OFF			((UINT16)0x56)
+#define		HFA384x_FD_ADDRESS2_OFF			((UINT16)0x5C)
+#define		HFA384x_FD_ADDRESS3_OFF			((UINT16)0x62)
+#define		HFA384x_FD_SEQCONTROL_OFF		((UINT16)0x68)
+#define		HFA384x_FD_ADDRESS4_OFF			((UINT16)0x6A)
+#define		HFA384x_FD_DATALEN_OFF			((UINT16)0x70)
+/*--------------------------------------------------------------------
+802.3 Header (offset 72-7F)
+--------------------------------------------------------------------*/
+#define		HFA384x_FD_DESTADDRESS_OFF		((UINT16)0x72)
+#define		HFA384x_FD_SRCADDRESS_OFF		((UINT16)0x78)
+#define		HFA384x_FD_DATALENGTH_OFF		((UINT16)0x7E)
+
+/*--------------------------------------------------------------------
+FRAME STRUCTURES: Communication Frames
+----------------------------------------------------------------------
+Communication Frames: Transmit Frames
+--------------------------------------------------------------------*/
+/*-- Communication Frame: Transmit Frame Structure --*/
+typedef struct hfa384x_tx_frame
+{
+	UINT16	status;
+	UINT16	reserved1;
+	UINT16	reserved2;
+	UINT32	sw_support;
+	UINT8	tx_retrycount;
+	UINT8   tx_rate;
+	UINT16	tx_control;
+
+	/*-- 802.11 Header Information --*/
+
+	UINT16	frame_control;
+	UINT16	duration_id;
+	UINT8	address1[6];
+	UINT8	address2[6];
+	UINT8	address3[6];
+	UINT16	sequence_control;
+	UINT8	address4[6];
+	UINT16	data_len; /* little endian format */
+
+	/*-- 802.3 Header Information --*/
+
+	UINT8	dest_addr[6];
+	UINT8	src_addr[6];
+	UINT16	data_length; /* big endian format */
+} __WLAN_ATTRIB_PACK__ hfa384x_tx_frame_t;
+/*--------------------------------------------------------------------
+Communication Frames: Field Masks for Transmit Frames
+--------------------------------------------------------------------*/
+/*-- Status Field --*/
+#define		HFA384x_TXSTATUS_ACKERR			((UINT16)BIT5)
+#define		HFA384x_TXSTATUS_FORMERR		((UINT16)BIT3)
+#define		HFA384x_TXSTATUS_DISCON			((UINT16)BIT2)
+#define		HFA384x_TXSTATUS_AGEDERR		((UINT16)BIT1)
+#define		HFA384x_TXSTATUS_RETRYERR		((UINT16)BIT0)
+/*-- Transmit Control Field --*/
+#define		HFA384x_TX_CFPOLL			((UINT16)BIT12)
+#define		HFA384x_TX_PRST				((UINT16)BIT11)
+#define		HFA384x_TX_MACPORT			((UINT16)(BIT10 | BIT9 | BIT8))
+#define		HFA384x_TX_NOENCRYPT			((UINT16)BIT7)
+#define		HFA384x_TX_RETRYSTRAT			((UINT16)(BIT6 | BIT5))
+#define		HFA384x_TX_STRUCTYPE			((UINT16)(BIT4 | BIT3))
+#define		HFA384x_TX_TXEX				((UINT16)BIT2)
+#define		HFA384x_TX_TXOK				((UINT16)BIT1)
+/*--------------------------------------------------------------------
+Communication Frames: Test/Get/Set Field Values for Transmit Frames
+--------------------------------------------------------------------*/
+/*-- Status Field --*/
+#define HFA384x_TXSTATUS_ISERROR(v)	\
+	(((UINT16)(v))&\
+	(HFA384x_TXSTATUS_ACKERR|HFA384x_TXSTATUS_FORMERR|\
+	HFA384x_TXSTATUS_DISCON|HFA384x_TXSTATUS_AGEDERR|\
+	HFA384x_TXSTATUS_RETRYERR))
+
+#define	HFA384x_TXSTATUS_ISACKERR(v)	((UINT16)(((UINT16)(v)) & HFA384x_TXSTATUS_ACKERR))
+#define	HFA384x_TXSTATUS_ISFORMERR(v)	((UINT16)(((UINT16)(v)) & HFA384x_TXSTATUS_FORMERR))
+#define	HFA384x_TXSTATUS_ISDISCON(v)	((UINT16)(((UINT16)(v)) & HFA384x_TXSTATUS_DISCON))
+#define	HFA384x_TXSTATUS_ISAGEDERR(v)	((UINT16)(((UINT16)(v)) & HFA384x_TXSTATUS_AGEDERR))
+#define	HFA384x_TXSTATUS_ISRETRYERR(v)	((UINT16)(((UINT16)(v)) & HFA384x_TXSTATUS_RETRYERR))
+
+#define	HFA384x_TX_GET(v,m,s)		((((UINT16)(v))&((UINT16)(m)))>>((UINT16)(s)))
+#define	HFA384x_TX_SET(v,m,s)		((((UINT16)(v))<<((UINT16)(s)))&((UINT16)(m)))
+
+#define	HFA384x_TX_CFPOLL_GET(v)	HFA384x_TX_GET(v, HFA384x_TX_CFPOLL,12)
+#define	HFA384x_TX_CFPOLL_SET(v)	HFA384x_TX_SET(v, HFA384x_TX_CFPOLL,12)
+#define	HFA384x_TX_PRST_GET(v)		HFA384x_TX_GET(v, HFA384x_TX_PRST,11)
+#define	HFA384x_TX_PRST_SET(v)		HFA384x_TX_SET(v, HFA384x_TX_PRST,11)
+#define	HFA384x_TX_MACPORT_GET(v)	HFA384x_TX_GET(v, HFA384x_TX_MACPORT, 8)
+#define	HFA384x_TX_MACPORT_SET(v)	HFA384x_TX_SET(v, HFA384x_TX_MACPORT, 8)
+#define	HFA384x_TX_NOENCRYPT_GET(v)	HFA384x_TX_GET(v, HFA384x_TX_NOENCRYPT, 7)
+#define	HFA384x_TX_NOENCRYPT_SET(v)	HFA384x_TX_SET(v, HFA384x_TX_NOENCRYPT, 7)
+#define	HFA384x_TX_RETRYSTRAT_GET(v)	HFA384x_TX_GET(v, HFA384x_TX_RETRYSTRAT, 5)
+#define	HFA384x_TX_RETRYSTRAT_SET(v)	HFA384x_TX_SET(v, HFA384x_TX_RETRYSTRAT, 5)
+#define	HFA384x_TX_STRUCTYPE_GET(v)	HFA384x_TX_GET(v, HFA384x_TX_STRUCTYPE, 3)
+#define	HFA384x_TX_STRUCTYPE_SET(v)	HFA384x_TX_SET(v, HFA384x_TX_STRUCTYPE, 3)
+#define	HFA384x_TX_TXEX_GET(v)		HFA384x_TX_GET(v, HFA384x_TX_TXEX, 2)
+#define	HFA384x_TX_TXEX_SET(v)		HFA384x_TX_SET(v, HFA384x_TX_TXEX, 2)
+#define	HFA384x_TX_TXOK_GET(v)		HFA384x_TX_GET(v, HFA384x_TX_TXOK, 1)
+#define	HFA384x_TX_TXOK_SET(v)		HFA384x_TX_SET(v, HFA384x_TX_TXOK, 1)
+/*--------------------------------------------------------------------
+Communication Frames: Receive Frames
+--------------------------------------------------------------------*/
+/*-- Communication Frame: Receive Frame Structure --*/
+typedef struct hfa384x_rx_frame
+{
+	/*-- MAC rx descriptor (hfa384x byte order) --*/
+	UINT16	status;
+	UINT32	time;
+	UINT8	silence;
+	UINT8	signal;
+	UINT8	rate;
+	UINT8	rx_flow;
+	UINT16	reserved1;
+	UINT16	reserved2;
+
+	/*-- 802.11 Header Information (802.11 byte order) --*/
+	UINT16	frame_control;
+	UINT16	duration_id;
+	UINT8	address1[6];
+	UINT8	address2[6];
+	UINT8	address3[6];
+	UINT16	sequence_control;
+	UINT8	address4[6];
+	UINT16	data_len; /* hfa384x (little endian) format */
+
+	/*-- 802.3 Header Information --*/
+	UINT8	dest_addr[6];
+	UINT8	src_addr[6];
+	UINT16	data_length; /* IEEE? (big endian) format */
+} __WLAN_ATTRIB_PACK__ hfa384x_rx_frame_t;
+/*--------------------------------------------------------------------
+Communication Frames: Field Masks for Receive Frames
+--------------------------------------------------------------------*/
+/*-- Offsets --------*/
+#define		HFA384x_RX_DATA_LEN_OFF			((UINT16)44)
+#define		HFA384x_RX_80211HDR_OFF			((UINT16)14)
+#define		HFA384x_RX_DATA_OFF			((UINT16)60)
+
+/*-- Status Fields --*/
+#define		HFA384x_RXSTATUS_MSGTYPE		((UINT16)(BIT15 | BIT14 | BIT13))
+#define		HFA384x_RXSTATUS_MACPORT		((UINT16)(BIT10 | BIT9 | BIT8))
+#define		HFA384x_RXSTATUS_UNDECR			((UINT16)BIT1)
+#define		HFA384x_RXSTATUS_FCSERR			((UINT16)BIT0)
+/*--------------------------------------------------------------------
+Communication Frames: Test/Get/Set Field Values for Receive Frames
+--------------------------------------------------------------------*/
+#define		HFA384x_RXSTATUS_MSGTYPE_GET(value)	((UINT16)((((UINT16)(value)) & HFA384x_RXSTATUS_MSGTYPE) >> 13))
+#define		HFA384x_RXSTATUS_MSGTYPE_SET(value)	((UINT16)(((UINT16)(value)) << 13))
+#define		HFA384x_RXSTATUS_MACPORT_GET(value)	((UINT16)((((UINT16)(value)) & HFA384x_RXSTATUS_MACPORT) >> 8))
+#define		HFA384x_RXSTATUS_MACPORT_SET(value)	((UINT16)(((UINT16)(value)) << 8))
+#define		HFA384x_RXSTATUS_ISUNDECR(value)	((UINT16)(((UINT16)(value)) & HFA384x_RXSTATUS_UNDECR))
+#define		HFA384x_RXSTATUS_ISFCSERR(value)	((UINT16)(((UINT16)(value)) & HFA384x_RXSTATUS_FCSERR))
+/*--------------------------------------------------------------------
+ FRAME STRUCTURES: Information Types and Information Frame Structures
+----------------------------------------------------------------------
+Information Types
+--------------------------------------------------------------------*/
+#define		HFA384x_IT_HANDOVERADDR			((UINT16)0xF000UL)
+#define		HFA384x_IT_HANDOVERDEAUTHADDRESS	((UINT16)0xF001UL)//AP 1.3.7
+#define		HFA384x_IT_COMMTALLIES			((UINT16)0xF100UL)
+#define		HFA384x_IT_SCANRESULTS			((UINT16)0xF101UL)
+#define		HFA384x_IT_CHINFORESULTS		((UINT16)0xF102UL)
+#define		HFA384x_IT_HOSTSCANRESULTS		((UINT16)0xF103UL)
+#define		HFA384x_IT_LINKSTATUS			((UINT16)0xF200UL)
+#define		HFA384x_IT_ASSOCSTATUS			((UINT16)0xF201UL)
+#define		HFA384x_IT_AUTHREQ			((UINT16)0xF202UL)
+#define		HFA384x_IT_PSUSERCNT			((UINT16)0xF203UL)
+#define		HFA384x_IT_KEYIDCHANGED			((UINT16)0xF204UL)
+#define		HFA384x_IT_ASSOCREQ    			((UINT16)0xF205UL)
+#define		HFA384x_IT_MICFAILURE  			((UINT16)0xF206UL)
+
+/*--------------------------------------------------------------------
+Information Frames Structures
+----------------------------------------------------------------------
+Information Frames: Notification Frame Structures
+--------------------------------------------------------------------*/
+/*--  Notification Frame,MAC Mgmt: Handover Address --*/
+typedef struct hfa384x_HandoverAddr
+{
+	UINT16	framelen;
+	UINT16	infotype;
+	UINT8	handover_addr[WLAN_BSSID_LEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_HandoverAddr_t;
+
+/*--  Inquiry Frame, Diagnose: Communication Tallies --*/
+typedef struct hfa384x_CommTallies16
+{
+	UINT16	txunicastframes;
+	UINT16	txmulticastframes;
+	UINT16	txfragments;
+	UINT16	txunicastoctets;
+	UINT16	txmulticastoctets;
+	UINT16	txdeferredtrans;
+	UINT16	txsingleretryframes;
+	UINT16	txmultipleretryframes;
+	UINT16	txretrylimitexceeded;
+	UINT16	txdiscards;
+	UINT16	rxunicastframes;
+	UINT16	rxmulticastframes;
+	UINT16	rxfragments;
+	UINT16	rxunicastoctets;
+	UINT16	rxmulticastoctets;
+	UINT16	rxfcserrors;
+	UINT16	rxdiscardsnobuffer;
+	UINT16	txdiscardswrongsa;
+	UINT16	rxdiscardswepundecr;
+	UINT16	rxmsginmsgfrag;
+	UINT16	rxmsginbadmsgfrag;
+} __WLAN_ATTRIB_PACK__ hfa384x_CommTallies16_t;
+
+typedef struct hfa384x_CommTallies32
+{
+	UINT32	txunicastframes;
+	UINT32	txmulticastframes;
+	UINT32	txfragments;
+	UINT32	txunicastoctets;
+	UINT32	txmulticastoctets;
+	UINT32	txdeferredtrans;
+	UINT32	txsingleretryframes;
+	UINT32	txmultipleretryframes;
+	UINT32	txretrylimitexceeded;
+	UINT32	txdiscards;
+	UINT32	rxunicastframes;
+	UINT32	rxmulticastframes;
+	UINT32	rxfragments;
+	UINT32	rxunicastoctets;
+	UINT32	rxmulticastoctets;
+	UINT32	rxfcserrors;
+	UINT32	rxdiscardsnobuffer;
+	UINT32	txdiscardswrongsa;
+	UINT32	rxdiscardswepundecr;
+	UINT32	rxmsginmsgfrag;
+	UINT32	rxmsginbadmsgfrag;
+} __WLAN_ATTRIB_PACK__ hfa384x_CommTallies32_t;
+
+/*--  Inquiry Frame, Diagnose: Scan Results & Subfields--*/
+typedef struct hfa384x_ScanResultSub
+{
+	UINT16	chid;
+	UINT16	anl;
+	UINT16	sl;
+	UINT8	bssid[WLAN_BSSID_LEN];
+	UINT16	bcnint;
+	UINT16	capinfo;
+	hfa384x_bytestr32_t	ssid;
+	UINT8	supprates[10]; /* 802.11 info element */
+	UINT16	proberesp_rate;
+} __WLAN_ATTRIB_PACK__ hfa384x_ScanResultSub_t;
+
+typedef struct hfa384x_ScanResult
+{
+	UINT16	rsvd;
+	UINT16	scanreason;
+	hfa384x_ScanResultSub_t
+		result[HFA384x_SCANRESULT_MAX];
+} __WLAN_ATTRIB_PACK__ hfa384x_ScanResult_t;
+
+/*--  Inquiry Frame, Diagnose: ChInfo Results & Subfields--*/
+typedef struct hfa384x_ChInfoResultSub
+{
+	UINT16	chid;
+	UINT16	anl;
+	UINT16	pnl;
+	UINT16	active;
+} __WLAN_ATTRIB_PACK__ hfa384x_ChInfoResultSub_t;
+
+#define HFA384x_CHINFORESULT_BSSACTIVE	BIT0
+#define HFA384x_CHINFORESULT_PCFACTIVE	BIT1
+
+typedef struct hfa384x_ChInfoResult
+{
+	UINT16	scanchannels;
+	hfa384x_ChInfoResultSub_t
+		result[HFA384x_CHINFORESULT_MAX];
+} __WLAN_ATTRIB_PACK__ hfa384x_ChInfoResult_t;
+
+/*--  Inquiry Frame, Diagnose: Host Scan Results & Subfields--*/
+typedef struct hfa384x_HScanResultSub
+{
+	UINT16	chid;
+	UINT16	anl;
+	UINT16	sl;
+	UINT8	bssid[WLAN_BSSID_LEN];
+	UINT16	bcnint;
+	UINT16	capinfo;
+	hfa384x_bytestr32_t	ssid;
+	UINT8	supprates[10]; /* 802.11 info element */
+	UINT16	proberesp_rate;
+	UINT16	atim;
+} __WLAN_ATTRIB_PACK__ hfa384x_HScanResultSub_t;
+
+typedef struct hfa384x_HScanResult
+{
+	UINT16	nresult;
+	UINT16	rsvd;
+	hfa384x_HScanResultSub_t
+		result[HFA384x_HSCANRESULT_MAX];
+} __WLAN_ATTRIB_PACK__ hfa384x_HScanResult_t;
+
+/*--  Unsolicited Frame, MAC Mgmt: LinkStatus --*/
+
+#define HFA384x_LINK_NOTCONNECTED	((UINT16)0)
+#define HFA384x_LINK_CONNECTED		((UINT16)1)
+#define HFA384x_LINK_DISCONNECTED	((UINT16)2)
+#define HFA384x_LINK_AP_CHANGE		((UINT16)3)
+#define HFA384x_LINK_AP_OUTOFRANGE	((UINT16)4)
+#define HFA384x_LINK_AP_INRANGE		((UINT16)5)
+#define HFA384x_LINK_ASSOCFAIL		((UINT16)6)
+
+typedef struct hfa384x_LinkStatus
+{
+	UINT16	linkstatus;
+} __WLAN_ATTRIB_PACK__ hfa384x_LinkStatus_t;
+
+
+/*--  Unsolicited Frame, MAC Mgmt: AssociationStatus (--*/
+
+#define HFA384x_ASSOCSTATUS_STAASSOC	((UINT16)1)
+#define HFA384x_ASSOCSTATUS_REASSOC	((UINT16)2)
+#define HFA384x_ASSOCSTATUS_DISASSOC	((UINT16)3)
+#define HFA384x_ASSOCSTATUS_ASSOCFAIL	((UINT16)4)
+#define HFA384x_ASSOCSTATUS_AUTHFAIL	((UINT16)5)
+
+typedef struct hfa384x_AssocStatus
+{
+	UINT16	assocstatus;
+	UINT8	sta_addr[WLAN_ADDR_LEN];
+	/* old_ap_addr is only valid if assocstatus == 2 */
+	UINT8	old_ap_addr[WLAN_ADDR_LEN];
+	UINT16	reason;
+	UINT16	reserved;
+} __WLAN_ATTRIB_PACK__ hfa384x_AssocStatus_t;
+
+/*--  Unsolicited Frame, MAC Mgmt: AuthRequest (AP Only) --*/
+
+typedef struct hfa384x_AuthRequest
+{
+	UINT8	sta_addr[WLAN_ADDR_LEN];
+	UINT16	algorithm;
+} __WLAN_ATTRIB_PACK__ hfa384x_AuthReq_t;
+
+/*--  Unsolicited Frame, MAC Mgmt: AssocRequest (AP Only) --*/
+
+typedef struct hfa384x_AssocRequest
+{
+	UINT8	sta_addr[WLAN_ADDR_LEN];
+	UINT16	type;
+	UINT8   wpa_data[80];
+} __WLAN_ATTRIB_PACK__ hfa384x_AssocReq_t;
+
+
+#define HFA384x_ASSOCREQ_TYPE_ASSOC     0
+#define HFA384x_ASSOCREQ_TYPE_REASSOC   1
+
+/*--  Unsolicited Frame, MAC Mgmt: MIC Failure  (AP Only) --*/
+
+typedef struct hfa384x_MicFailure
+{
+	UINT8	sender[WLAN_ADDR_LEN];
+	UINT8	dest[WLAN_ADDR_LEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_MicFailure_t;
+
+/*--  Unsolicited Frame, MAC Mgmt: PSUserCount (AP Only) --*/
+
+typedef struct hfa384x_PSUserCount
+{
+	UINT16	usercnt;
+} __WLAN_ATTRIB_PACK__ hfa384x_PSUserCount_t;
+
+typedef struct hfa384x_KeyIDChanged
+{
+	UINT8	sta_addr[WLAN_ADDR_LEN];
+	UINT16	keyid;
+} __WLAN_ATTRIB_PACK__ hfa384x_KeyIDChanged_t;
+
+/*--  Collection of all Inf frames ---------------*/
+typedef union hfa384x_infodata {
+	hfa384x_CommTallies16_t	commtallies16;
+	hfa384x_CommTallies32_t	commtallies32;
+	hfa384x_ScanResult_t	scanresult;
+	hfa384x_ChInfoResult_t	chinforesult;
+	hfa384x_HScanResult_t	hscanresult;
+	hfa384x_LinkStatus_t	linkstatus;
+	hfa384x_AssocStatus_t	assocstatus;
+	hfa384x_AuthReq_t	authreq;
+	hfa384x_PSUserCount_t	psusercnt;
+	hfa384x_KeyIDChanged_t  keyidchanged;
+} __WLAN_ATTRIB_PACK__ hfa384x_infodata_t;
+
+typedef struct hfa384x_InfFrame
+{
+	UINT16			framelen;
+	UINT16			infotype;
+	hfa384x_infodata_t	info;
+} __WLAN_ATTRIB_PACK__ hfa384x_InfFrame_t;
+
+#if (WLAN_HOSTIF == WLAN_USB)
+/*--------------------------------------------------------------------
+USB Packet structures and constants.
+--------------------------------------------------------------------*/
+
+/* Should be sent to the ctrlout endpoint */
+#define HFA384x_USB_ENBULKIN	6
+
+/* Should be sent to the bulkout endpoint */
+#define HFA384x_USB_TXFRM	0
+#define HFA384x_USB_CMDREQ	1
+#define HFA384x_USB_WRIDREQ	2
+#define HFA384x_USB_RRIDREQ	3
+#define HFA384x_USB_WMEMREQ	4
+#define HFA384x_USB_RMEMREQ	5
+
+/* Received from the bulkin endpoint */
+#define HFA384x_USB_ISFRM(a)	(!((a) & 0x8000))
+#define HFA384x_USB_ISTXFRM(a)	(((a) & 0x9000) == 0x1000)
+#define HFA384x_USB_ISRXFRM(a)	(!((a) & 0x9000))
+#define HFA384x_USB_INFOFRM	0x8000
+#define HFA384x_USB_CMDRESP	0x8001
+#define HFA384x_USB_WRIDRESP	0x8002
+#define HFA384x_USB_RRIDRESP	0x8003
+#define HFA384x_USB_WMEMRESP	0x8004
+#define HFA384x_USB_RMEMRESP	0x8005
+#define HFA384x_USB_BUFAVAIL	0x8006
+#define HFA384x_USB_ERROR	0x8007
+
+/*------------------------------------*/
+/* Request (bulk OUT) packet contents */
+
+typedef struct hfa384x_usb_txfrm {
+	hfa384x_tx_frame_t	desc;
+	UINT8			data[WLAN_DATA_MAXLEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_txfrm_t;
+
+typedef struct hfa384x_usb_cmdreq {
+	UINT16		type;
+	UINT16		cmd;
+	UINT16		parm0;
+	UINT16		parm1;
+	UINT16		parm2;
+	UINT8		pad[54];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_cmdreq_t;
+
+typedef struct hfa384x_usb_wridreq {
+	UINT16		type;
+	UINT16		frmlen;
+	UINT16		rid;
+	UINT8		data[HFA384x_RIDDATA_MAXLEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_wridreq_t;
+
+typedef struct hfa384x_usb_rridreq {
+	UINT16		type;
+	UINT16		frmlen;
+	UINT16		rid;
+	UINT8		pad[58];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_rridreq_t;
+
+typedef struct hfa384x_usb_wmemreq {
+	UINT16		type;
+	UINT16		frmlen;
+	UINT16		offset;
+	UINT16		page;
+	UINT8		data[HFA384x_USB_RWMEM_MAXLEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_wmemreq_t;
+
+typedef struct hfa384x_usb_rmemreq {
+	UINT16		type;
+	UINT16		frmlen;
+	UINT16		offset;
+	UINT16		page;
+	UINT8		pad[56];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_rmemreq_t;
+
+/*------------------------------------*/
+/* Response (bulk IN) packet contents */
+
+typedef struct hfa384x_usb_rxfrm {
+	hfa384x_rx_frame_t	desc;
+	UINT8			data[WLAN_DATA_MAXLEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_rxfrm_t;
+
+typedef struct hfa384x_usb_infofrm {
+	UINT16			type;
+	hfa384x_InfFrame_t	info;
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_infofrm_t;
+
+typedef struct hfa384x_usb_statusresp {
+	UINT16		type;
+	UINT16		status;
+	UINT16		resp0;
+	UINT16		resp1;
+	UINT16		resp2;
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_cmdresp_t;
+
+typedef hfa384x_usb_cmdresp_t hfa384x_usb_wridresp_t;
+
+typedef struct hfa384x_usb_rridresp {
+	UINT16		type;
+	UINT16		frmlen;
+	UINT16		rid;
+	UINT8		data[HFA384x_RIDDATA_MAXLEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_rridresp_t;
+
+typedef hfa384x_usb_cmdresp_t hfa384x_usb_wmemresp_t;
+
+typedef struct hfa384x_usb_rmemresp {
+	UINT16		type;
+	UINT16		frmlen;
+	UINT8		data[HFA384x_USB_RWMEM_MAXLEN];
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_rmemresp_t;
+
+typedef struct hfa384x_usb_bufavail {
+	UINT16		type;
+	UINT16		frmlen;
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_bufavail_t;
+
+typedef struct hfa384x_usb_error {
+	UINT16		type;
+	UINT16		errortype;
+} __WLAN_ATTRIB_PACK__ hfa384x_usb_error_t;
+
+/*----------------------------------------------------------*/
+/* Unions for packaging all the known packet types together */
+
+typedef union hfa384x_usbout {
+	UINT16			type;
+	hfa384x_usb_txfrm_t	txfrm;
+	hfa384x_usb_cmdreq_t	cmdreq;
+	hfa384x_usb_wridreq_t	wridreq;
+	hfa384x_usb_rridreq_t	rridreq;
+	hfa384x_usb_wmemreq_t	wmemreq;
+	hfa384x_usb_rmemreq_t	rmemreq;
+} __WLAN_ATTRIB_PACK__ hfa384x_usbout_t;
+
+typedef union hfa384x_usbin {
+	UINT16			type;
+	hfa384x_usb_rxfrm_t	rxfrm;
+	hfa384x_usb_txfrm_t	txfrm;
+	hfa384x_usb_infofrm_t	infofrm;
+	hfa384x_usb_cmdresp_t	cmdresp;
+	hfa384x_usb_wridresp_t	wridresp;
+	hfa384x_usb_rridresp_t	rridresp;
+	hfa384x_usb_wmemresp_t	wmemresp;
+	hfa384x_usb_rmemresp_t	rmemresp;
+	hfa384x_usb_bufavail_t	bufavail;
+	hfa384x_usb_error_t	usberror;
+	UINT8			boguspad[3000];
+} __WLAN_ATTRIB_PACK__ hfa384x_usbin_t;
+
+#endif /* WLAN_USB */
+
+/*--------------------------------------------------------------------
+PD record structures.
+--------------------------------------------------------------------*/
+
+typedef struct hfa384x_pdr_pcb_partnum
+{
+	UINT8	num[8];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_pcb_partnum_t;
+
+typedef struct hfa384x_pdr_pcb_tracenum
+{
+	UINT8	num[8];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_pcb_tracenum_t;
+
+typedef struct hfa384x_pdr_nic_serial
+{
+	UINT8	num[12];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_nic_serial_t;
+
+typedef struct hfa384x_pdr_mkk_measurements
+{
+	double	carrier_freq;
+	double	occupied_band;
+	double	power_density;
+	double	tx_spur_f1;
+	double	tx_spur_f2;
+	double	tx_spur_f3;
+	double	tx_spur_f4;
+	double	tx_spur_l1;
+	double	tx_spur_l2;
+	double	tx_spur_l3;
+	double	tx_spur_l4;
+	double	rx_spur_f1;
+	double	rx_spur_f2;
+	double	rx_spur_l1;
+	double	rx_spur_l2;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_mkk_measurements_t;
+
+typedef struct hfa384x_pdr_nic_ramsize
+{
+	UINT8	size[12]; /* units of KB */
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_nic_ramsize_t;
+
+typedef struct hfa384x_pdr_mfisuprange
+{
+	UINT16	id;
+	UINT16	variant;
+	UINT16	bottom;
+	UINT16	top;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_mfisuprange_t;
+
+typedef struct hfa384x_pdr_cfisuprange
+{
+	UINT16	id;
+	UINT16	variant;
+	UINT16	bottom;
+	UINT16	top;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_cfisuprange_t;
+
+typedef struct hfa384x_pdr_nicid
+{
+	UINT16	id;
+	UINT16	variant;
+	UINT16	major;
+	UINT16	minor;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_nicid_t;
+
+
+typedef struct hfa384x_pdr_refdac_measurements
+{
+	UINT16	value[0];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_refdac_measurements_t;
+
+typedef struct hfa384x_pdr_vgdac_measurements
+{
+	UINT16	value[0];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_vgdac_measurements_t;
+
+typedef struct hfa384x_pdr_level_comp_measurements
+{
+	UINT16	value[0];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_level_compc_measurements_t;
+
+typedef struct hfa384x_pdr_mac_address
+{
+	UINT8	addr[6];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_mac_address_t;
+
+typedef struct hfa384x_pdr_mkk_callname
+{
+	UINT8	callname[8];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_mkk_callname_t;
+
+typedef struct hfa384x_pdr_regdomain
+{
+	UINT16	numdomains;
+	UINT16	domain[5];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_regdomain_t;
+
+typedef struct hfa384x_pdr_allowed_channel
+{
+	UINT16	ch_bitmap;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_allowed_channel_t;
+
+typedef struct hfa384x_pdr_default_channel
+{
+	UINT16	channel;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_default_channel_t;
+
+typedef struct hfa384x_pdr_privacy_option
+{
+	UINT16	available;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_privacy_option_t;
+
+typedef struct hfa384x_pdr_temptype
+{
+	UINT16	type;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_temptype_t;
+
+typedef struct hfa384x_pdr_refdac_setup
+{
+	UINT16	ch_value[14];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_refdac_setup_t;
+
+typedef struct hfa384x_pdr_vgdac_setup
+{
+	UINT16	ch_value[14];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_vgdac_setup_t;
+
+typedef struct hfa384x_pdr_level_comp_setup
+{
+	UINT16	ch_value[14];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_level_comp_setup_t;
+
+typedef struct hfa384x_pdr_trimdac_setup
+{
+	UINT16	trimidac;
+	UINT16	trimqdac;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_trimdac_setup_t;
+
+typedef struct hfa384x_pdr_ifr_setting
+{
+	UINT16	value[3];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_ifr_setting_t;
+
+typedef struct hfa384x_pdr_rfr_setting
+{
+	UINT16	value[3];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_rfr_setting_t;
+
+typedef struct hfa384x_pdr_hfa3861_baseline
+{
+	UINT16	value[50];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_baseline_t;
+
+typedef struct hfa384x_pdr_hfa3861_shadow
+{
+	UINT32	value[32];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_shadow_t;
+
+typedef struct hfa384x_pdr_hfa3861_ifrf
+{
+	UINT32	value[20];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_ifrf_t;
+
+typedef struct hfa384x_pdr_hfa3861_chcalsp
+{
+	UINT16	value[14];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_chcalsp_t;
+
+typedef struct hfa384x_pdr_hfa3861_chcali
+{
+	UINT16	value[17];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_chcali_t;
+
+typedef struct hfa384x_pdr_hfa3861_nic_config
+{
+	UINT16	config_bitmap;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_nic_config_t;
+
+typedef struct hfa384x_pdr_hfo_delay
+{
+	UINT8   hfo_delay;
+} __WLAN_ATTRIB_PACK__ hfa384x_hfo_delay_t;
+
+typedef struct hfa384x_pdr_hfa3861_manf_testsp
+{
+	UINT16	value[30];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_manf_testsp_t;
+
+typedef struct hfa384x_pdr_hfa3861_manf_testi
+{
+	UINT16	value[30];
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_hfa3861_manf_testi_t;
+
+typedef struct hfa384x_end_of_pda
+{
+	UINT16	crc;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdr_end_of_pda_t;
+
+typedef struct hfa384x_pdrec
+{
+	UINT16	len; /* in words */
+	UINT16	code;
+	union pdr {
+	hfa384x_pdr_pcb_partnum_t	pcb_partnum;
+	hfa384x_pdr_pcb_tracenum_t	pcb_tracenum;
+	hfa384x_pdr_nic_serial_t	nic_serial;
+	hfa384x_pdr_mkk_measurements_t	mkk_measurements;
+	hfa384x_pdr_nic_ramsize_t	nic_ramsize;
+	hfa384x_pdr_mfisuprange_t	mfisuprange;
+	hfa384x_pdr_cfisuprange_t	cfisuprange;
+	hfa384x_pdr_nicid_t		nicid;
+	hfa384x_pdr_refdac_measurements_t	refdac_measurements;
+	hfa384x_pdr_vgdac_measurements_t	vgdac_measurements;
+	hfa384x_pdr_level_compc_measurements_t	level_compc_measurements;
+	hfa384x_pdr_mac_address_t	mac_address;
+	hfa384x_pdr_mkk_callname_t	mkk_callname;
+	hfa384x_pdr_regdomain_t		regdomain;
+	hfa384x_pdr_allowed_channel_t	allowed_channel;
+	hfa384x_pdr_default_channel_t	default_channel;
+	hfa384x_pdr_privacy_option_t	privacy_option;
+	hfa384x_pdr_temptype_t		temptype;
+	hfa384x_pdr_refdac_setup_t	refdac_setup;
+	hfa384x_pdr_vgdac_setup_t	vgdac_setup;
+	hfa384x_pdr_level_comp_setup_t	level_comp_setup;
+	hfa384x_pdr_trimdac_setup_t	trimdac_setup;
+	hfa384x_pdr_ifr_setting_t	ifr_setting;
+	hfa384x_pdr_rfr_setting_t	rfr_setting;
+	hfa384x_pdr_hfa3861_baseline_t	hfa3861_baseline;
+	hfa384x_pdr_hfa3861_shadow_t	hfa3861_shadow;
+	hfa384x_pdr_hfa3861_ifrf_t	hfa3861_ifrf;
+	hfa384x_pdr_hfa3861_chcalsp_t	hfa3861_chcalsp;
+	hfa384x_pdr_hfa3861_chcali_t	hfa3861_chcali;
+	hfa384x_pdr_nic_config_t	nic_config;
+	hfa384x_hfo_delay_t             hfo_delay;
+	hfa384x_pdr_hfa3861_manf_testsp_t	hfa3861_manf_testsp;
+	hfa384x_pdr_hfa3861_manf_testi_t	hfa3861_manf_testi;
+	hfa384x_pdr_end_of_pda_t	end_of_pda;
+
+	} data;
+} __WLAN_ATTRIB_PACK__ hfa384x_pdrec_t;
+
+
+#ifdef __KERNEL__
+/*--------------------------------------------------------------------
+---  MAC state structure, argument to all functions --
+---  Also, a collection of support types --
+--------------------------------------------------------------------*/
+typedef struct hfa384x_statusresult
+{
+	UINT16	status;
+	UINT16	resp0;
+	UINT16	resp1;
+	UINT16	resp2;
+} hfa384x_cmdresult_t;
+
+#if (WLAN_HOSTIF == WLAN_USB)
+
+/* USB Control Exchange (CTLX):
+ *  A queue of the structure below is maintained for all of the
+ *  Request/Response type USB packets supported by Prism2.
+ */
+/* The following hfa384x_* structures are arguments to
+ * the usercb() for the different CTLX types.
+ */
+typedef hfa384x_cmdresult_t hfa384x_wridresult_t;
+typedef hfa384x_cmdresult_t hfa384x_wmemresult_t;
+
+typedef struct hfa384x_rridresult
+{
+	UINT16		rid;
+	const void	*riddata;
+	UINT		riddata_len;
+} hfa384x_rridresult_t;
+
+enum ctlx_state {
+	CTLX_START = 0,	/* Start state, not queued */
+
+	CTLX_COMPLETE,	/* CTLX successfully completed */
+	CTLX_REQ_FAILED,	/* OUT URB completed w/ error */
+
+	CTLX_PENDING,		/* Queued, data valid */
+	CTLX_REQ_SUBMITTED,	/* OUT URB submitted */
+	CTLX_REQ_COMPLETE,	/* OUT URB complete */
+	CTLX_RESP_COMPLETE	/* IN URB received */
+};
+typedef enum ctlx_state  CTLX_STATE;
+
+struct hfa384x_usbctlx;
+struct hfa384x;
+
+typedef void (*ctlx_cmdcb_t)( struct hfa384x*, const struct hfa384x_usbctlx* );
+
+typedef void (*ctlx_usercb_t)(
+	struct hfa384x	*hw,
+	void		*ctlxresult,
+	void		*usercb_data);
+
+typedef struct hfa384x_usbctlx
+{
+	struct list_head	list;
+
+	size_t			outbufsize;
+	hfa384x_usbout_t	outbuf;		/* pkt buf for OUT */
+	hfa384x_usbin_t		inbuf;		/* pkt buf for IN(a copy) */
+
+	CTLX_STATE		state;		/* Tracks running state */
+
+	struct completion	done;
+	volatile int		reapable;	/* Food for the reaper task */
+
+	ctlx_cmdcb_t		cmdcb;		/* Async command callback */
+	ctlx_usercb_t		usercb;		/* Async user callback, */
+	void			*usercb_data;	/*  at CTLX completion  */
+
+	int			variant;	/* Identifies cmd variant */
+} hfa384x_usbctlx_t;
+
+typedef struct hfa384x_usbctlxq
+{
+	spinlock_t		lock;
+	struct list_head	pending;
+	struct list_head	active;
+	struct list_head	completing;
+	struct list_head	reapable;
+} hfa384x_usbctlxq_t;
+#endif
+
+typedef struct hfa484x_metacmd
+{
+	UINT16		cmd;
+
+	UINT16          parm0;
+	UINT16          parm1;
+	UINT16          parm2;
+
+#if 0 //XXX cmd irq stuff
+	UINT16          bulkid;         /* what RID/FID to copy down. */
+	int             bulklen;        /* how much to copy from BAP */
+        char            *bulkdata;      /* And to where? */
+#endif
+
+	hfa384x_cmdresult_t result;
+} hfa384x_metacmd_t;
+
+#define	MAX_PRISM2_GRP_ADDR	16
+#define	MAX_GRP_ADDR		32
+#define WLAN_COMMENT_MAX	80  /* Max. length of user comment string. */
+
+#define MM_SAT_PCF		(BIT14)
+#define MM_GCSD_PCF		(BIT15)
+#define MM_GCSD_PCF_EB		(BIT14 | BIT15)
+
+#define WLAN_STATE_STOPPED	0   /* Network is not active. */
+#define WLAN_STATE_STARTED	1   /* Network has been started. */
+
+#define WLAN_AUTH_MAX           60  /* Max. # of authenticated stations. */
+#define WLAN_ACCESS_MAX		60  /* Max. # of stations in an access list. */
+#define WLAN_ACCESS_NONE	0   /* No stations may be authenticated. */
+#define WLAN_ACCESS_ALL		1   /* All stations may be authenticated. */
+#define WLAN_ACCESS_ALLOW	2   /* Authenticate only "allowed" stations. */
+#define WLAN_ACCESS_DENY	3   /* Do not authenticate "denied" stations. */
+
+/* XXX These are going away ASAP */
+typedef struct prism2sta_authlist
+{
+	UINT	cnt;
+	UINT8	addr[WLAN_AUTH_MAX][WLAN_ADDR_LEN];
+	UINT8	assoc[WLAN_AUTH_MAX];
+} prism2sta_authlist_t;
+
+typedef struct prism2sta_accesslist
+{
+	UINT	modify;
+	UINT	cnt;
+	UINT8	addr[WLAN_ACCESS_MAX][WLAN_ADDR_LEN];
+	UINT	cnt1;
+	UINT8	addr1[WLAN_ACCESS_MAX][WLAN_ADDR_LEN];
+} prism2sta_accesslist_t;
+
+typedef struct hfa384x
+{
+#if (WLAN_HOSTIF != WLAN_USB)
+	/* Resource config */
+	UINT32			iobase;
+	char			__iomem *membase;
+	UINT32			irq;
+#else
+	/* USB support data */
+	struct usb_device	*usb;
+	struct urb		rx_urb;
+	struct sk_buff		*rx_urb_skb;
+	struct urb		tx_urb;
+	struct urb		ctlx_urb;
+	hfa384x_usbout_t	txbuff;
+	hfa384x_usbctlxq_t	ctlxq;
+	struct timer_list	reqtimer;
+	struct timer_list	resptimer;
+
+	struct timer_list	throttle;
+
+	struct tasklet_struct	reaper_bh;
+	struct tasklet_struct	completion_bh;
+
+	struct work_struct	usb_work;
+
+	unsigned long		usb_flags;
+#define THROTTLE_RX	0
+#define THROTTLE_TX	1
+#define WORK_RX_HALT	2
+#define WORK_TX_HALT	3
+#define WORK_RX_RESUME	4
+#define WORK_TX_RESUME	5
+
+	unsigned short		req_timer_done:1;
+	unsigned short		resp_timer_done:1;
+
+	int                     endp_in;
+	int                     endp_out;
+#endif /* !USB */
+
+#if (WLAN_HOSTIF == WLAN_PCMCIA)
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	struct pcmcia_device *pdev;
+#else
+	dev_link_t	*link;
+#endif
+	dev_node_t	node;
+#endif
+
+	int                     sniff_fcs;
+	int                     sniff_channel;
+	int                     sniff_truncate;
+	int                     sniffhdr;
+
+	wait_queue_head_t cmdq;	        /* wait queue itself */
+
+	/* Controller state */
+	UINT32		state;
+	UINT32		isap;
+	UINT8		port_enabled[HFA384x_NUMPORTS_MAX];
+#if (WLAN_HOSTIF != WLAN_USB)
+	UINT		auxen;
+	UINT            isram16;
+#endif /* !USB */
+
+	/* Download support */
+	UINT				dlstate;
+	hfa384x_downloadbuffer_t	bufinfo;
+	UINT16				dltimeout;
+
+#if (WLAN_HOSTIF != WLAN_USB)
+	spinlock_t	cmdlock;
+	volatile int    cmdflag;        /* wait queue flag */
+	hfa384x_metacmd_t *cmddata;      /* for our async callback */
+
+	/* BAP support */
+	spinlock_t	baplock;
+	struct tasklet_struct   bap_tasklet;
+
+	/* MAC buffer ids */
+        UINT16          txfid_head;
+        UINT16          txfid_tail;
+        UINT            txfid_N;
+        UINT16          txfid_queue[HFA384x_DRVR_FIDSTACKLEN_MAX];
+	UINT16			infofid;
+	struct semaphore	infofid_sem;
+#endif /* !USB */
+
+	int                          scanflag;    /* to signal scan comlete */
+	int                          join_ap;        /* are we joined to a specific ap */
+	int                          join_retries;   /* number of join retries till we fail */
+	hfa384x_JoinRequest_data_t   joinreq;        /* join request saved data */
+
+	wlandevice_t            *wlandev;
+	/* Timer to allow for the deferred processing of linkstatus messages */
+	struct work_struct 	link_bh;
+
+        struct work_struct      commsqual_bh;
+	hfa384x_commsquality_t  qual;
+	struct timer_list	commsqual_timer;
+
+	UINT16 link_status;
+	UINT16 link_status_new;
+	struct sk_buff_head        authq;
+
+	/* And here we have stuff that used to be in priv */
+
+	/* State variables */
+	UINT		presniff_port_type;
+	UINT16		presniff_wepflags;
+	UINT32		dot11_desired_bss_type;
+	int		ap;	/* AP flag: 0 - Station, 1 - Access Point. */
+
+	int             dbmadjust;
+
+	/* Group Addresses - right now, there are up to a total
+	of MAX_GRP_ADDR group addresses */
+	UINT8		dot11_grp_addr[MAX_GRP_ADDR][WLAN_ADDR_LEN];
+	UINT		dot11_grpcnt;
+
+	/* Component Identities */
+	hfa384x_compident_t	ident_nic;
+	hfa384x_compident_t	ident_pri_fw;
+	hfa384x_compident_t	ident_sta_fw;
+	hfa384x_compident_t	ident_ap_fw;
+	UINT16			mm_mods;
+
+	/* Supplier compatibility ranges */
+	hfa384x_caplevel_t	cap_sup_mfi;
+	hfa384x_caplevel_t	cap_sup_cfi;
+	hfa384x_caplevel_t	cap_sup_pri;
+	hfa384x_caplevel_t	cap_sup_sta;
+	hfa384x_caplevel_t	cap_sup_ap;
+
+	/* Actor compatibility ranges */
+	hfa384x_caplevel_t	cap_act_pri_cfi; /* pri f/w to controller interface */
+	hfa384x_caplevel_t	cap_act_sta_cfi; /* sta f/w to controller interface */
+	hfa384x_caplevel_t	cap_act_sta_mfi; /* sta f/w to modem interface */
+	hfa384x_caplevel_t	cap_act_ap_cfi;  /* ap f/w to controller interface */
+	hfa384x_caplevel_t	cap_act_ap_mfi;  /* ap f/w to modem interface */
+
+	UINT32			psusercount;  /* Power save user count. */
+	hfa384x_CommTallies32_t	tallies;      /* Communication tallies. */
+	UINT8			comment[WLAN_COMMENT_MAX+1]; /* User comment */
+
+	/* Channel Info request results (AP only) */
+	struct {
+		atomic_t		done;
+		UINT8			count;
+		hfa384x_ChInfoResult_t	results;
+	} channel_info;
+
+	hfa384x_InfFrame_t      *scanresults;
+
+
+        prism2sta_authlist_t	authlist;     /* Authenticated station list. */
+	UINT			accessmode;   /* Access mode. */
+        prism2sta_accesslist_t	allow;        /* Allowed station list. */
+        prism2sta_accesslist_t	deny;         /* Denied station list. */
+
+} hfa384x_t;
+
+/*=============================================================*/
+/*--- Function Declarations -----------------------------------*/
+/*=============================================================*/
+#if (WLAN_HOSTIF == WLAN_USB)
+void
+hfa384x_create(
+	hfa384x_t *hw,
+	struct usb_device *usb);
+#else
+void
+hfa384x_create(
+	hfa384x_t *hw,
+	UINT irq,
+	UINT32 iobase,
+	UINT8 __iomem *membase);
+#endif
+
+void hfa384x_destroy(hfa384x_t *hw);
+
+irqreturn_t
+hfa384x_interrupt(int irq, void *dev_id PT_REGS);
+int
+hfa384x_corereset( hfa384x_t *hw, int holdtime, int settletime, int genesis);
+int
+hfa384x_drvr_chinforesults( hfa384x_t *hw);
+int
+hfa384x_drvr_commtallies( hfa384x_t *hw);
+int
+hfa384x_drvr_disable(hfa384x_t *hw, UINT16 macport);
+int
+hfa384x_drvr_enable(hfa384x_t *hw, UINT16 macport);
+int
+hfa384x_drvr_flashdl_enable(hfa384x_t *hw);
+int
+hfa384x_drvr_flashdl_disable(hfa384x_t *hw);
+int
+hfa384x_drvr_flashdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len);
+int
+hfa384x_drvr_getconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len);
+int
+hfa384x_drvr_handover( hfa384x_t *hw, UINT8 *addr);
+int
+hfa384x_drvr_hostscanresults( hfa384x_t *hw);
+int
+hfa384x_drvr_low_level(hfa384x_t *hw, hfa384x_metacmd_t *cmd);
+int
+hfa384x_drvr_mmi_read(hfa384x_t *hw, UINT32 address, UINT32 *result);
+int
+hfa384x_drvr_mmi_write(hfa384x_t *hw, UINT32 address, UINT32 data);
+int
+hfa384x_drvr_ramdl_enable(hfa384x_t *hw, UINT32 exeaddr);
+int
+hfa384x_drvr_ramdl_disable(hfa384x_t *hw);
+int
+hfa384x_drvr_ramdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len);
+int
+hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, UINT len);
+int
+hfa384x_drvr_scanresults( hfa384x_t *hw);
+
+int
+hfa384x_drvr_setconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len);
+
+static inline int
+hfa384x_drvr_getconfig16(hfa384x_t *hw, UINT16 rid, void *val)
+{
+	int		result = 0;
+	result = hfa384x_drvr_getconfig(hw, rid, val, sizeof(UINT16));
+	if ( result == 0 ) {
+		*((UINT16*)val) = hfa384x2host_16(*((UINT16*)val));
+	}
+	return result;
+}
+
+static inline int
+hfa384x_drvr_getconfig32(hfa384x_t *hw, UINT16 rid, void *val)
+{
+	int		result = 0;
+
+	result = hfa384x_drvr_getconfig(hw, rid, val, sizeof(UINT32));
+	if ( result == 0 ) {
+		*((UINT32*)val) = hfa384x2host_32(*((UINT32*)val));
+	}
+
+	return result;
+}
+
+static inline int
+hfa384x_drvr_setconfig16(hfa384x_t *hw, UINT16 rid, UINT16 val)
+{
+	UINT16 value = host2hfa384x_16(val);
+	return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(value));
+}
+
+static inline int
+hfa384x_drvr_setconfig32(hfa384x_t *hw, UINT16 rid, UINT32 val)
+{
+	UINT32 value = host2hfa384x_32(val);
+	return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(value));
+}
+
+#if (WLAN_HOSTIF == WLAN_USB)
+int
+hfa384x_drvr_getconfig_async(hfa384x_t     *hw,
+                              UINT16        rid,
+                              ctlx_usercb_t usercb,
+                              void          *usercb_data);
+
+int
+hfa384x_drvr_setconfig_async(hfa384x_t *hw,
+                              UINT16 rid,
+                              void *buf,
+                              UINT16 len,
+                              ctlx_usercb_t usercb,
+                              void *usercb_data);
+#else
+static inline int
+hfa384x_drvr_setconfig_async(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len,
+			     void *ptr1, void *ptr2)
+{
+         (void)ptr1;
+         (void)ptr2;
+         return hfa384x_drvr_setconfig(hw, rid, buf, len);
+}
+#endif
+
+static inline int
+hfa384x_drvr_setconfig16_async(hfa384x_t *hw, UINT16 rid, UINT16 val)
+{
+	UINT16 value = host2hfa384x_16(val);
+	return hfa384x_drvr_setconfig_async(hw, rid, &value, sizeof(value),
+					    NULL , NULL);
+}
+
+static inline int
+hfa384x_drvr_setconfig32_async(hfa384x_t *hw, UINT16 rid, UINT32 val)
+{
+	UINT32 value = host2hfa384x_32(val);
+	return hfa384x_drvr_setconfig_async(hw, rid, &value, sizeof(value),
+					    NULL , NULL);
+}
+
+
+int
+hfa384x_drvr_start(hfa384x_t *hw);
+int
+hfa384x_drvr_stop(hfa384x_t *hw);
+int
+hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep);
+void
+hfa384x_tx_timeout(wlandevice_t *wlandev);
+
+int
+hfa384x_cmd_initialize(hfa384x_t *hw);
+int
+hfa384x_cmd_enable(hfa384x_t *hw, UINT16 macport);
+int
+hfa384x_cmd_disable(hfa384x_t *hw, UINT16 macport);
+int
+hfa384x_cmd_diagnose(hfa384x_t *hw);
+int
+hfa384x_cmd_allocate(hfa384x_t *hw, UINT16 len);
+int
+hfa384x_cmd_transmit(hfa384x_t *hw, UINT16 reclaim, UINT16 qos, UINT16 fid);
+int
+hfa384x_cmd_clearpersist(hfa384x_t *hw, UINT16 fid);
+int
+hfa384x_cmd_notify(hfa384x_t *hw, UINT16 reclaim, UINT16 fid, void *buf, UINT16 len);
+int
+hfa384x_cmd_inquire(hfa384x_t *hw, UINT16 fid);
+int
+hfa384x_cmd_access(hfa384x_t *hw, UINT16 write, UINT16 rid, void *buf, UINT16 len);
+int
+hfa384x_cmd_monitor(hfa384x_t *hw, UINT16 enable);
+int
+hfa384x_cmd_download(
+	hfa384x_t *hw,
+	UINT16 mode,
+	UINT16 lowaddr,
+	UINT16 highaddr,
+	UINT16 codelen);
+int
+hfa384x_cmd_aux_enable(hfa384x_t *hw, int force);
+int
+hfa384x_cmd_aux_disable(hfa384x_t *hw);
+int
+hfa384x_copy_from_bap(
+	hfa384x_t *hw,
+	UINT16	bap,
+	UINT16	id,
+	UINT16	offset,
+	void	*buf,
+	UINT	len);
+int
+hfa384x_copy_to_bap(
+	hfa384x_t *hw,
+	UINT16	bap,
+	UINT16	id,
+	UINT16	offset,
+	void	*buf,
+	UINT	len);
+void
+hfa384x_copy_from_aux(
+	hfa384x_t *hw,
+	UINT32	cardaddr,
+	UINT32	auxctl,
+	void	*buf,
+	UINT	len);
+void
+hfa384x_copy_to_aux(
+	hfa384x_t *hw,
+	UINT32	cardaddr,
+	UINT32	auxctl,
+	void	*buf,
+	UINT	len);
+
+#if (WLAN_HOSTIF != WLAN_USB)
+
+/*
+   HFA384x is a LITTLE ENDIAN part.
+
+   the get/setreg functions implicitly byte-swap the data to LE.
+   the _noswap variants do not perform a byte-swap on the data.
+*/
+
+static inline UINT16
+__hfa384x_getreg(hfa384x_t *hw, UINT reg);
+
+static inline void
+__hfa384x_setreg(hfa384x_t *hw, UINT16 val, UINT reg);
+
+static inline UINT16
+__hfa384x_getreg_noswap(hfa384x_t *hw, UINT reg);
+
+static inline void
+__hfa384x_setreg_noswap(hfa384x_t *hw, UINT16 val, UINT reg);
+
+#ifdef REVERSE_ENDIAN
+#define hfa384x_getreg __hfa384x_getreg_noswap
+#define hfa384x_setreg __hfa384x_setreg_noswap
+#define hfa384x_getreg_noswap __hfa384x_getreg
+#define hfa384x_setreg_noswap __hfa384x_setreg
+#else
+#define hfa384x_getreg __hfa384x_getreg
+#define hfa384x_setreg __hfa384x_setreg
+#define hfa384x_getreg_noswap __hfa384x_getreg_noswap
+#define hfa384x_setreg_noswap __hfa384x_setreg_noswap
+#endif
+
+/*----------------------------------------------------------------
+* hfa384x_getreg
+*
+* Retrieve the value of one of the MAC registers.  Done here
+* because different PRISM2 MAC parts use different buses and such.
+* NOTE: This function returns the value in HOST ORDER!!!!!!
+*
+* Arguments:
+*       hw         MAC part structure
+*       reg        Register identifier (offset for I/O based i/f)
+*
+* Returns:
+*       Value from the register in HOST ORDER!!!!
+----------------------------------------------------------------*/
+static inline UINT16
+__hfa384x_getreg(hfa384x_t *hw, UINT reg)
+{
+/*	printk(KERN_DEBUG "Reading from 0x%0x\n", hw->membase + reg); */
+#if ((WLAN_HOSTIF == WLAN_PCMCIA) || (WLAN_HOSTIF == WLAN_PLX))
+	return wlan_inw_le16_to_cpu(hw->iobase+reg);
+#elif (WLAN_HOSTIF == WLAN_PCI)
+	return __le16_to_cpu(readw(hw->membase + reg));
+#endif
+}
+
+/*----------------------------------------------------------------
+* hfa384x_setreg
+*
+* Set the value of one of the MAC registers.  Done here
+* because different PRISM2 MAC parts use different buses and such.
+* NOTE: This function assumes the value is in HOST ORDER!!!!!!
+*
+* Arguments:
+*       hw	MAC part structure
+*	val	Value, in HOST ORDER!!, to put in the register
+*       reg	Register identifier (offset for I/O based i/f)
+*
+* Returns:
+*       Nothing
+----------------------------------------------------------------*/
+static inline void
+__hfa384x_setreg(hfa384x_t *hw, UINT16 val, UINT reg)
+{
+#if ((WLAN_HOSTIF == WLAN_PCMCIA) || (WLAN_HOSTIF == WLAN_PLX))
+	wlan_outw_cpu_to_le16( val, hw->iobase + reg);
+	return;
+#elif (WLAN_HOSTIF == WLAN_PCI)
+	writew(__cpu_to_le16(val), hw->membase + reg);
+	return;
+#endif
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_getreg_noswap
+*
+* Retrieve the value of one of the MAC registers.  Done here
+* because different PRISM2 MAC parts use different buses and such.
+*
+* Arguments:
+*       hw         MAC part structure
+*       reg        Register identifier (offset for I/O based i/f)
+*
+* Returns:
+*       Value from the register.
+----------------------------------------------------------------*/
+static inline UINT16
+__hfa384x_getreg_noswap(hfa384x_t *hw, UINT reg)
+{
+#if ((WLAN_HOSTIF == WLAN_PCMCIA) || (WLAN_HOSTIF == WLAN_PLX))
+	return wlan_inw(hw->iobase+reg);
+#elif (WLAN_HOSTIF == WLAN_PCI)
+	return readw(hw->membase + reg);
+#endif
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_setreg_noswap
+*
+* Set the value of one of the MAC registers.  Done here
+* because different PRISM2 MAC parts use different buses and such.
+*
+* Arguments:
+*       hw	MAC part structure
+*	val	Value to put in the register
+*       reg	Register identifier (offset for I/O based i/f)
+*
+* Returns:
+*       Nothing
+----------------------------------------------------------------*/
+static inline void
+__hfa384x_setreg_noswap(hfa384x_t *hw, UINT16 val, UINT reg)
+{
+#if ((WLAN_HOSTIF == WLAN_PCMCIA) || (WLAN_HOSTIF == WLAN_PLX))
+	wlan_outw( val, hw->iobase + reg);
+	return;
+#elif (WLAN_HOSTIF == WLAN_PCI)
+	writew(val, hw->membase + reg);
+	return;
+#endif
+}
+
+
+static inline void hfa384x_events_all(hfa384x_t *hw)
+{
+	hfa384x_setreg(hw,
+		       HFA384x_INT_NORMAL
+#ifdef CMD_IRQ
+		       | HFA384x_INTEN_CMD_SET(1)
+#endif
+		       ,
+		       HFA384x_INTEN);
+
+}
+
+static inline void hfa384x_events_nobap(hfa384x_t *hw)
+{
+	hfa384x_setreg(hw,
+		        (HFA384x_INT_NORMAL & ~HFA384x_INT_BAP_OP)
+#ifdef CMD_IRQ
+		       | HFA384x_INTEN_CMD_SET(1)
+#endif
+		       ,
+		       HFA384x_INTEN);
+
+}
+
+#endif /* WLAN_HOSTIF != WLAN_USB */
+#endif /* __KERNEL__ */
+
+#endif  /* _HFA384x_H */
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
new file mode 100644
index 0000000..db0c502
--- /dev/null
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -0,0 +1,5027 @@
+/* src/prism2/driver/hfa384x_usb.c
+*
+* Functions that talk to the USB variantof the Intersil hfa384x MAC
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file implements functions that correspond to the prism2/hfa384x
+* 802.11 MAC hardware and firmware host interface.
+*
+* The functions can be considered to represent several levels of
+* abstraction.  The lowest level functions are simply C-callable wrappers
+* around the register accesses.  The next higher level represents C-callable
+* prism2 API functions that match the Intersil documentation as closely
+* as is reasonable.  The next higher layer implements common sequences
+* of invokations of the API layer (e.g. write to bap, followed by cmd).
+*
+* Common sequences:
+* hfa384x_drvr_xxx	Highest level abstractions provided by the
+*			hfa384x code.  They are driver defined wrappers
+*			for common sequences.  These functions generally
+*			use the services of the lower levels.
+*
+* hfa384x_drvr_xxxconfig  An example of the drvr level abstraction. These
+*			functions are wrappers for the RID get/set
+*			sequence. They 	call copy_[to|from]_bap() and
+*			cmd_access().	These functions operate on the
+*			RIDs and buffers without validation.  The caller
+*			is responsible for that.
+*
+* API wrapper functions:
+* hfa384x_cmd_xxx	functions that provide access to the f/w commands.
+*			The function arguments correspond to each command
+*			argument, even command arguments that get packed
+*			into single registers.  These functions _just_
+*			issue the command by setting the cmd/parm regs
+*			& reading the status/resp regs.  Additional
+*			activities required to fully use a command
+*			(read/write from/to bap, get/set int status etc.)
+*			are implemented separately.  Think of these as
+*			C-callable prism2 commands.
+*
+* Lowest Layer Functions:
+* hfa384x_docmd_xxx	These functions implement the sequence required
+*			to issue any prism2 command.  Primarily used by the
+*			hfa384x_cmd_xxx functions.
+*
+* hfa384x_bap_xxx	BAP read/write access functions.
+*			Note: we usually use BAP0 for non-interrupt context
+*			 and BAP1 for interrupt context.
+*
+* hfa384x_dl_xxx	download related functions.
+*
+* Driver State Issues:
+* Note that there are two pairs of functions that manage the
+* 'initialized' and 'running' states of the hw/MAC combo.  The four
+* functions are create(), destroy(), start(), and stop().  create()
+* sets up the data structures required to support the hfa384x_*
+* functions and destroy() cleans them up.  The start() function gets
+* the actual hardware running and enables the interrupts.  The stop()
+* function shuts the hardware down.  The sequence should be:
+* create()
+* start()
+*  .
+*  .  Do interesting things w/ the hardware
+*  .
+* stop()
+* destroy()
+*
+* Note that destroy() can be called without calling stop() first.
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+#define WLAN_DBVAR	prism2_debug
+
+#include "version.h"
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <asm/bitops.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+
+#include "wlan_compat.h"
+
+#if (WLAN_HOSTIF != WLAN_USB)
+#error "This file is specific to USB"
+#endif
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+static int
+wait_for_completion_interruptible(struct completion *x)
+{
+  int ret = 0;
+
+  might_sleep();
+
+  spin_lock_irq(&x->wait.lock);
+  if (!x->done) {
+    DECLARE_WAITQUEUE(wait, current);
+
+    wait.flags |= WQ_FLAG_EXCLUSIVE;
+    __add_wait_queue_tail(&x->wait, &wait);
+    do {
+      if (signal_pending(current)) {
+        ret = -ERESTARTSYS;
+        __remove_wait_queue(&x->wait, &wait);
+        goto out;
+      }
+      __set_current_state(TASK_INTERRUPTIBLE);
+      spin_unlock_irq(&x->wait.lock);
+      schedule();
+      spin_lock_irq(&x->wait.lock);
+    } while (!x->done);
+    __remove_wait_queue(&x->wait, &wait);
+  }
+  x->done--;
+out:
+  spin_unlock_irq(&x->wait.lock);
+
+  return ret;
+}
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)
+static void
+usb_init_urb(struct urb *urb)
+{
+	memset(urb, 0, sizeof(*urb));
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) /* tune me! */
+	urb->count = (atomic_t)ATOMIC_INIT(1);
+#endif
+	spin_lock_init(&urb->lock);
+}
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) /* tune me! */
+#  define SUBMIT_URB(u,f)  usb_submit_urb(u,f)
+#else
+#  define SUBMIT_URB(u,f)  usb_submit_urb(u)
+#endif
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211req.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "hfa384x.h"
+#include "prism2mgmt.h"
+
+/*================================================================*/
+/* Local Constants */
+
+enum cmd_mode
+{
+  DOWAIT = 0,
+  DOASYNC
+};
+typedef enum cmd_mode CMD_MODE;
+
+#define THROTTLE_JIFFIES	(HZ/8)
+
+/*================================================================*/
+/* Local Macros */
+
+#define ROUNDUP64(a) (((a)+63)&~63)
+
+/*================================================================*/
+/* Local Types */
+
+/*================================================================*/
+/* Local Static Definitions */
+extern int prism2_debug;
+
+/*================================================================*/
+/* Local Function Declarations */
+
+#ifdef DEBUG_USB
+static void
+dbprint_urb(struct urb* urb);
+#endif
+
+static void
+hfa384x_int_rxmonitor(
+	wlandevice_t *wlandev,
+	hfa384x_usb_rxfrm_t *rxfrm);
+
+static void
+hfa384x_usb_defer(struct work_struct *data);
+
+static int
+submit_rx_urb(hfa384x_t *hw, gfp_t flags);
+
+static int
+submit_tx_urb(hfa384x_t *hw, struct urb *tx_urb, gfp_t flags);
+
+/*---------------------------------------------------*/
+/* Callbacks */
+#ifdef URB_ONLY_CALLBACK
+static void
+hfa384x_usbout_callback(struct urb *urb);
+static void
+hfa384x_ctlxout_callback(struct urb *urb);
+static void
+hfa384x_usbin_callback(struct urb *urb);
+#else
+static void
+hfa384x_usbout_callback(struct urb *urb, struct pt_regs *regs);
+static void
+hfa384x_ctlxout_callback(struct urb *urb, struct pt_regs *regs);
+static void
+hfa384x_usbin_callback(struct urb *urb, struct pt_regs *regs);
+#endif
+
+static void
+hfa384x_usbin_txcompl(wlandevice_t *wlandev, hfa384x_usbin_t *usbin);
+
+static void
+hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb);
+
+static void
+hfa384x_usbin_info(wlandevice_t *wlandev, hfa384x_usbin_t *usbin);
+
+static void
+hfa384x_usbout_tx(wlandevice_t *wlandev, hfa384x_usbout_t *usbout);
+
+static void hfa384x_usbin_ctlx(hfa384x_t *hw, hfa384x_usbin_t *usbin,
+			       int urb_status);
+
+/*---------------------------------------------------*/
+/* Functions to support the prism2 usb command queue */
+
+static void
+hfa384x_usbctlxq_run(hfa384x_t *hw);
+
+static void
+hfa384x_usbctlx_reqtimerfn(unsigned long data);
+
+static void
+hfa384x_usbctlx_resptimerfn(unsigned long data);
+
+static void
+hfa384x_usb_throttlefn(unsigned long data);
+
+static void
+hfa384x_usbctlx_completion_task(unsigned long data);
+
+static void
+hfa384x_usbctlx_reaper_task(unsigned long data);
+
+static int
+hfa384x_usbctlx_submit(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx);
+
+static void
+unlocked_usbctlx_complete(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx);
+
+struct usbctlx_completor
+{
+	int (*complete)(struct usbctlx_completor*);
+};
+typedef struct usbctlx_completor usbctlx_completor_t;
+
+static int
+hfa384x_usbctlx_complete_sync(hfa384x_t *hw,
+                              hfa384x_usbctlx_t *ctlx,
+                              usbctlx_completor_t *completor);
+
+static int
+unlocked_usbctlx_cancel_async(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx);
+
+static void
+hfa384x_cb_status(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx);
+
+static void
+hfa384x_cb_rrid(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx);
+
+static int
+usbctlx_get_status(const hfa384x_usb_cmdresp_t *cmdresp,
+                   hfa384x_cmdresult_t *result);
+
+static void
+usbctlx_get_rridresult(const hfa384x_usb_rridresp_t *rridresp,
+                       hfa384x_rridresult_t *result);
+
+/*---------------------------------------------------*/
+/* Low level req/resp CTLX formatters and submitters */
+static int
+hfa384x_docmd(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	hfa384x_metacmd_t *cmd,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data);
+
+static int
+hfa384x_dorrid(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	rid,
+	void	*riddata,
+	UINT	riddatalen,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data);
+
+static int
+hfa384x_dowrid(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	rid,
+	void	*riddata,
+	UINT	riddatalen,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data);
+
+static int
+hfa384x_dormem(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	page,
+	UINT16	offset,
+	void	*data,
+	UINT	len,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data);
+
+static int
+hfa384x_dowmem(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	page,
+	UINT16	offset,
+	void	*data,
+	UINT	len,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data);
+
+static int
+hfa384x_isgood_pdrcode(UINT16 pdrcode);
+
+/*================================================================*/
+/* Function Definitions */
+static inline const char* ctlxstr(CTLX_STATE s)
+{
+	static const char* ctlx_str[] = {
+		"Initial state",
+		"Complete",
+		"Request failed",
+		"Request pending",
+		"Request packet submitted",
+		"Request packet completed",
+		"Response packet completed"
+	};
+
+	return ctlx_str[s];
+};
+
+
+static inline hfa384x_usbctlx_t*
+get_active_ctlx(hfa384x_t *hw)
+{
+	return list_entry(hw->ctlxq.active.next, hfa384x_usbctlx_t, list);
+}
+
+
+#ifdef DEBUG_USB
+void
+dbprint_urb(struct urb* urb)
+{
+	WLAN_LOG_DEBUG(3,"urb->pipe=0x%08x\n", urb->pipe);
+	WLAN_LOG_DEBUG(3,"urb->status=0x%08x\n", urb->status);
+	WLAN_LOG_DEBUG(3,"urb->transfer_flags=0x%08x\n", urb->transfer_flags);
+	WLAN_LOG_DEBUG(3,"urb->transfer_buffer=0x%08x\n", (UINT)urb->transfer_buffer);
+	WLAN_LOG_DEBUG(3,"urb->transfer_buffer_length=0x%08x\n", urb->transfer_buffer_length);
+	WLAN_LOG_DEBUG(3,"urb->actual_length=0x%08x\n", urb->actual_length);
+	WLAN_LOG_DEBUG(3,"urb->bandwidth=0x%08x\n", urb->bandwidth);
+	WLAN_LOG_DEBUG(3,"urb->setup_packet(ctl)=0x%08x\n", (UINT)urb->setup_packet);
+	WLAN_LOG_DEBUG(3,"urb->start_frame(iso/irq)=0x%08x\n", urb->start_frame);
+	WLAN_LOG_DEBUG(3,"urb->interval(irq)=0x%08x\n", urb->interval);
+	WLAN_LOG_DEBUG(3,"urb->error_count(iso)=0x%08x\n", urb->error_count);
+	WLAN_LOG_DEBUG(3,"urb->timeout=0x%08x\n", urb->timeout);
+	WLAN_LOG_DEBUG(3,"urb->context=0x%08x\n", (UINT)urb->context);
+	WLAN_LOG_DEBUG(3,"urb->complete=0x%08x\n", (UINT)urb->complete);
+}
+#endif
+
+
+/*----------------------------------------------------------------
+* submit_rx_urb
+*
+* Listen for input data on the BULK-IN pipe. If the pipe has
+* stalled then schedule it to be reset.
+*
+* Arguments:
+*	hw		device struct
+*	memflags	memory allocation flags
+*
+* Returns:
+*	error code from submission
+*
+* Call context:
+*	Any
+----------------------------------------------------------------*/
+static int
+submit_rx_urb(hfa384x_t *hw, gfp_t memflags)
+{
+	struct sk_buff *skb;
+	int result;
+
+	DBFENTER;
+
+	skb = dev_alloc_skb(sizeof(hfa384x_usbin_t));
+	if (skb == NULL) {
+		result = -ENOMEM;
+		goto done;
+	}
+
+	/* Post the IN urb */
+	usb_fill_bulk_urb(&hw->rx_urb, hw->usb,
+	              hw->endp_in,
+	              skb->data, sizeof(hfa384x_usbin_t),
+	              hfa384x_usbin_callback, hw->wlandev);
+
+	hw->rx_urb_skb = skb;
+
+	result = -ENOLINK;
+	if ( !hw->wlandev->hwremoved && !test_bit(WORK_RX_HALT, &hw->usb_flags)) {
+		result = SUBMIT_URB(&hw->rx_urb, memflags);
+
+		/* Check whether we need to reset the RX pipe */
+		if (result == -EPIPE) {
+			WLAN_LOG_WARNING("%s rx pipe stalled: requesting reset\n",
+			                 hw->wlandev->netdev->name);
+			if ( !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags) )
+				schedule_work(&hw->usb_work);
+		}
+	}
+
+	/* Don't leak memory if anything should go wrong */
+	if (result != 0) {
+		dev_kfree_skb(skb);
+		hw->rx_urb_skb = NULL;
+	}
+
+ done:
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* submit_tx_urb
+*
+* Prepares and submits the URB of transmitted data. If the
+* submission fails then it will schedule the output pipe to
+* be reset.
+*
+* Arguments:
+*	hw		device struct
+*	tx_urb		URB of data for tranmission
+*	memflags	memory allocation flags
+*
+* Returns:
+*	error code from submission
+*
+* Call context:
+*	Any
+----------------------------------------------------------------*/
+static int
+submit_tx_urb(hfa384x_t *hw, struct urb *tx_urb, gfp_t memflags)
+{
+	struct net_device *netdev = hw->wlandev->netdev;
+	int result;
+
+	DBFENTER;
+
+	result = -ENOLINK;
+	if ( netif_running(netdev) ) {
+
+		if ( !hw->wlandev->hwremoved && !test_bit(WORK_TX_HALT, &hw->usb_flags) ) {
+			result = SUBMIT_URB(tx_urb, memflags);
+
+			/* Test whether we need to reset the TX pipe */
+			if (result == -EPIPE) {
+				WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
+				                 netdev->name);
+				set_bit(WORK_TX_HALT, &hw->usb_flags);
+				schedule_work(&hw->usb_work);
+			} else if (result == 0) {
+				netif_stop_queue(netdev);
+			}
+		}
+	}
+
+	DBFEXIT;
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa394x_usb_defer
+*
+* There are some things that the USB stack cannot do while
+* in interrupt context, so we arrange this function to run
+* in process context.
+*
+* Arguments:
+*	hw	device structure
+*
+* Returns:
+*	nothing
+*
+* Call context:
+*	process (by design)
+----------------------------------------------------------------*/
+static void
+hfa384x_usb_defer(struct work_struct *data)
+{
+	hfa384x_t *hw = container_of(data, struct hfa384x, usb_work);
+	struct net_device *netdev = hw->wlandev->netdev;
+
+	DBFENTER;
+
+	/* Don't bother trying to reset anything if the plug
+	 * has been pulled ...
+	 */
+	if ( hw->wlandev->hwremoved ) {
+		DBFEXIT;
+		return;
+	}
+
+	/* Reception has stopped: try to reset the input pipe */
+	if (test_bit(WORK_RX_HALT, &hw->usb_flags)) {
+		int ret;
+
+		usb_kill_urb(&hw->rx_urb);  /* Cannot be holding spinlock! */
+
+		ret = usb_clear_halt(hw->usb, hw->endp_in);
+		if (ret != 0) {
+			printk(KERN_ERR
+			       "Failed to clear rx pipe for %s: err=%d\n",
+			       netdev->name, ret);
+		} else {
+			printk(KERN_INFO "%s rx pipe reset complete.\n",
+			                 netdev->name);
+			clear_bit(WORK_RX_HALT, &hw->usb_flags);
+			set_bit(WORK_RX_RESUME, &hw->usb_flags);
+		}
+	}
+
+	/* Resume receiving data back from the device. */
+	if ( test_bit(WORK_RX_RESUME, &hw->usb_flags) ) {
+		int ret;
+
+		ret = submit_rx_urb(hw, GFP_KERNEL);
+		if (ret != 0) {
+			printk(KERN_ERR
+			       "Failed to resume %s rx pipe.\n", netdev->name);
+		} else {
+			clear_bit(WORK_RX_RESUME, &hw->usb_flags);
+		}
+	}
+
+	/* Transmission has stopped: try to reset the output pipe */
+	if (test_bit(WORK_TX_HALT, &hw->usb_flags)) {
+		int ret;
+
+		usb_kill_urb(&hw->tx_urb);
+		ret = usb_clear_halt(hw->usb, hw->endp_out);
+		if (ret != 0) {
+			printk(KERN_ERR
+			       "Failed to clear tx pipe for %s: err=%d\n",
+			       netdev->name, ret);
+		} else {
+			printk(KERN_INFO "%s tx pipe reset complete.\n",
+			                 netdev->name);
+			clear_bit(WORK_TX_HALT, &hw->usb_flags);
+			set_bit(WORK_TX_RESUME, &hw->usb_flags);
+
+			/* Stopping the BULK-OUT pipe also blocked
+			 * us from sending any more CTLX URBs, so
+			 * we need to re-run our queue ...
+			 */
+			hfa384x_usbctlxq_run(hw);
+		}
+	}
+
+	/* Resume transmitting. */
+	if ( test_and_clear_bit(WORK_TX_RESUME, &hw->usb_flags) ) {
+		p80211netdev_wake_queue(hw->wlandev);
+	}
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_create
+*
+* Sets up the hfa384x_t data structure for use.  Note this
+* does _not_ intialize the actual hardware, just the data structures
+* we use to keep track of its state.
+*
+* Arguments:
+*	hw		device structure
+*	irq		device irq number
+*	iobase		i/o base address for register access
+*	membase		memory base address for register access
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+void
+hfa384x_create( hfa384x_t *hw, struct usb_device *usb)
+{
+	DBFENTER;
+
+	memset(hw, 0, sizeof(hfa384x_t));
+	hw->usb = usb;
+
+	/* set up the endpoints */
+	hw->endp_in = usb_rcvbulkpipe(usb, 1);
+	hw->endp_out = usb_sndbulkpipe(usb, 2);
+
+	/* Set up the waitq */
+	init_waitqueue_head(&hw->cmdq);
+
+	/* Initialize the command queue */
+	spin_lock_init(&hw->ctlxq.lock);
+	INIT_LIST_HEAD(&hw->ctlxq.pending);
+	INIT_LIST_HEAD(&hw->ctlxq.active);
+	INIT_LIST_HEAD(&hw->ctlxq.completing);
+	INIT_LIST_HEAD(&hw->ctlxq.reapable);
+
+	/* Initialize the authentication queue */
+	skb_queue_head_init(&hw->authq);
+
+	tasklet_init(&hw->reaper_bh,
+	             hfa384x_usbctlx_reaper_task,
+	             (unsigned long)hw);
+	tasklet_init(&hw->completion_bh,
+	             hfa384x_usbctlx_completion_task,
+	             (unsigned long)hw);
+	INIT_WORK2(&hw->link_bh, prism2sta_processing_defer);
+	INIT_WORK2(&hw->usb_work, hfa384x_usb_defer);
+
+	init_timer(&hw->throttle);
+	hw->throttle.function = hfa384x_usb_throttlefn;
+	hw->throttle.data = (unsigned long)hw;
+
+	init_timer(&hw->resptimer);
+	hw->resptimer.function = hfa384x_usbctlx_resptimerfn;
+	hw->resptimer.data = (unsigned long)hw;
+
+	init_timer(&hw->reqtimer);
+	hw->reqtimer.function = hfa384x_usbctlx_reqtimerfn;
+	hw->reqtimer.data = (unsigned long)hw;
+
+	usb_init_urb(&hw->rx_urb);
+	usb_init_urb(&hw->tx_urb);
+	usb_init_urb(&hw->ctlx_urb);
+
+	hw->link_status = HFA384x_LINK_NOTCONNECTED;
+	hw->state = HFA384x_STATE_INIT;
+
+        INIT_WORK2(&hw->commsqual_bh, prism2sta_commsqual_defer);
+	init_timer(&hw->commsqual_timer);
+	hw->commsqual_timer.data = (unsigned long) hw;
+	hw->commsqual_timer.function = prism2sta_commsqual_timer;
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_destroy
+*
+* Partner to hfa384x_create().  This function cleans up the hw
+* structure so that it can be freed by the caller using a simple
+* kfree.  Currently, this function is just a placeholder.  If, at some
+* point in the future, an hw in the 'shutdown' state requires a 'deep'
+* kfree, this is where it should be done.  Note that if this function
+* is called on a _running_ hw structure, the drvr_stop() function is
+* called.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	nothing, this function is not allowed to fail.
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+void
+hfa384x_destroy( hfa384x_t *hw)
+{
+	struct sk_buff *skb;
+
+	DBFENTER;
+
+	if ( hw->state == HFA384x_STATE_RUNNING ) {
+		hfa384x_drvr_stop(hw);
+	}
+	hw->state = HFA384x_STATE_PREINIT;
+
+	if (hw->scanresults) {
+		kfree(hw->scanresults);
+		hw->scanresults = NULL;
+	}
+
+	/* Now to clean out the auth queue */
+        while ( (skb = skb_dequeue(&hw->authq)) ) {
+                dev_kfree_skb(skb);
+        }
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+ */
+static hfa384x_usbctlx_t* usbctlx_alloc(void)
+{
+	hfa384x_usbctlx_t *ctlx;
+
+	ctlx = kmalloc(sizeof(*ctlx), in_interrupt() ? GFP_ATOMIC : GFP_KERNEL);
+	if (ctlx != NULL)
+	{
+		memset(ctlx, 0, sizeof(*ctlx));
+		init_completion(&ctlx->done);
+	}
+
+	return ctlx;
+}
+
+
+/*----------------------------------------------------------------
+ *
+----------------------------------------------------------------*/
+static int
+usbctlx_get_status(const hfa384x_usb_cmdresp_t *cmdresp,
+                   hfa384x_cmdresult_t *result)
+{
+	DBFENTER;
+
+	result->status = hfa384x2host_16(cmdresp->status);
+	result->resp0 = hfa384x2host_16(cmdresp->resp0);
+	result->resp1 = hfa384x2host_16(cmdresp->resp1);
+	result->resp2 = hfa384x2host_16(cmdresp->resp2);
+
+	WLAN_LOG_DEBUG(4, "cmdresult:status=0x%04x "
+	                  "resp0=0x%04x resp1=0x%04x resp2=0x%04x\n",
+	                result->status,
+	                result->resp0,
+	                result->resp1,
+	                result->resp2);
+
+	DBFEXIT;
+	return (result->status & HFA384x_STATUS_RESULT);
+}
+
+static void
+usbctlx_get_rridresult(const hfa384x_usb_rridresp_t *rridresp,
+                       hfa384x_rridresult_t *result)
+{
+	DBFENTER;
+
+	result->rid = hfa384x2host_16(rridresp->rid);
+	result->riddata = rridresp->data;
+	result->riddata_len = ((hfa384x2host_16(rridresp->frmlen) - 1) * 2);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* Completor object:
+* This completor must be passed to hfa384x_usbctlx_complete_sync()
+* when processing a CTLX that returns a hfa384x_cmdresult_t structure.
+----------------------------------------------------------------*/
+struct usbctlx_cmd_completor
+{
+	usbctlx_completor_t	head;
+
+	const hfa384x_usb_cmdresp_t	*cmdresp;
+	hfa384x_cmdresult_t	*result;
+};
+typedef struct usbctlx_cmd_completor usbctlx_cmd_completor_t;
+
+static int usbctlx_cmd_completor_fn(usbctlx_completor_t *head)
+{
+	usbctlx_cmd_completor_t *complete = (usbctlx_cmd_completor_t*)head;
+	return usbctlx_get_status(complete->cmdresp, complete->result);
+}
+
+static inline usbctlx_completor_t*
+init_cmd_completor(usbctlx_cmd_completor_t *completor,
+                   const hfa384x_usb_cmdresp_t *cmdresp,
+                   hfa384x_cmdresult_t *result)
+{
+	completor->head.complete = usbctlx_cmd_completor_fn;
+	completor->cmdresp = cmdresp;
+	completor->result = result;
+	return &(completor->head);
+}
+
+/*----------------------------------------------------------------
+* Completor object:
+* This completor must be passed to hfa384x_usbctlx_complete_sync()
+* when processing a CTLX that reads a RID.
+----------------------------------------------------------------*/
+struct usbctlx_rrid_completor
+{
+	usbctlx_completor_t	head;
+
+	const hfa384x_usb_rridresp_t	*rridresp;
+	void			*riddata;
+	UINT			riddatalen;
+};
+typedef struct usbctlx_rrid_completor usbctlx_rrid_completor_t;
+
+static int usbctlx_rrid_completor_fn(usbctlx_completor_t *head)
+{
+	usbctlx_rrid_completor_t *complete = (usbctlx_rrid_completor_t*)head;
+	hfa384x_rridresult_t rridresult;
+
+	usbctlx_get_rridresult(complete->rridresp, &rridresult);
+
+	/* Validate the length, note body len calculation in bytes */
+	if ( rridresult.riddata_len != complete->riddatalen ) {
+		WLAN_LOG_WARNING(
+			"RID len mismatch, rid=0x%04x hlen=%d fwlen=%d\n",
+		        rridresult.rid,
+		        complete->riddatalen,
+		        rridresult.riddata_len);
+		return -ENODATA;
+	}
+
+	memcpy(complete->riddata,
+	       rridresult.riddata,
+	       complete->riddatalen);
+	return 0;
+}
+
+static inline usbctlx_completor_t*
+init_rrid_completor(usbctlx_rrid_completor_t *completor,
+                    const hfa384x_usb_rridresp_t *rridresp,
+                    void *riddata,
+                    UINT riddatalen)
+{
+	completor->head.complete = usbctlx_rrid_completor_fn;
+	completor->rridresp = rridresp;
+	completor->riddata = riddata;
+	completor->riddatalen = riddatalen;
+	return &(completor->head);
+}
+
+/*----------------------------------------------------------------
+* Completor object:
+* Interprets the results of a synchronous RID-write
+----------------------------------------------------------------*/
+typedef usbctlx_cmd_completor_t usbctlx_wrid_completor_t;
+#define init_wrid_completor  init_cmd_completor
+
+/*----------------------------------------------------------------
+* Completor object:
+* Interprets the results of a synchronous memory-write
+----------------------------------------------------------------*/
+typedef usbctlx_cmd_completor_t usbctlx_wmem_completor_t;
+#define init_wmem_completor  init_cmd_completor
+
+/*----------------------------------------------------------------
+* Completor object:
+* Interprets the results of a synchronous memory-read
+----------------------------------------------------------------*/
+struct usbctlx_rmem_completor
+{
+        usbctlx_completor_t           head;
+
+        const hfa384x_usb_rmemresp_t  *rmemresp;
+        void                          *data;
+        UINT                          len;
+};
+typedef struct usbctlx_rmem_completor usbctlx_rmem_completor_t;
+
+static int usbctlx_rmem_completor_fn(usbctlx_completor_t *head)
+{
+	usbctlx_rmem_completor_t *complete = (usbctlx_rmem_completor_t*)head;
+
+	WLAN_LOG_DEBUG(4,"rmemresp:len=%d\n", complete->rmemresp->frmlen);
+	memcpy(complete->data, complete->rmemresp->data, complete->len);
+	return 0;
+}
+
+static inline usbctlx_completor_t*
+init_rmem_completor(usbctlx_rmem_completor_t *completor,
+                    hfa384x_usb_rmemresp_t *rmemresp,
+                    void *data,
+                    UINT len)
+{
+	completor->head.complete = usbctlx_rmem_completor_fn;
+	completor->rmemresp = rmemresp;
+	completor->data = data;
+	completor->len = len;
+	return &(completor->head);
+}
+
+/*----------------------------------------------------------------
+* hfa384x_cb_status
+*
+* Ctlx_complete handler for async CMD type control exchanges.
+* mark the hw struct as such.
+*
+* Note: If the handling is changed here, it should probably be
+*       changed in docmd as well.
+*
+* Arguments:
+*	hw		hw struct
+*	ctlx		completed CTLX
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void
+hfa384x_cb_status(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx)
+{
+	DBFENTER;
+
+	if ( ctlx->usercb != NULL ) {
+		hfa384x_cmdresult_t cmdresult;
+
+		if (ctlx->state != CTLX_COMPLETE) {
+			memset(&cmdresult, 0, sizeof(cmdresult));
+			cmdresult.status = HFA384x_STATUS_RESULT_SET(HFA384x_CMD_ERR);
+		} else {
+			usbctlx_get_status(&ctlx->inbuf.cmdresp, &cmdresult);
+		}
+
+		ctlx->usercb(hw, &cmdresult, ctlx->usercb_data);
+	}
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cb_rrid
+*
+* CTLX completion handler for async RRID type control exchanges.
+*
+* Note: If the handling is changed here, it should probably be
+*       changed in dorrid as well.
+*
+* Arguments:
+*	hw		hw struct
+*	ctlx		completed CTLX
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void
+hfa384x_cb_rrid(hfa384x_t *hw, const hfa384x_usbctlx_t *ctlx)
+{
+	DBFENTER;
+
+	if ( ctlx->usercb != NULL ) {
+		hfa384x_rridresult_t rridresult;
+
+		if (ctlx->state != CTLX_COMPLETE) {
+			memset(&rridresult, 0, sizeof(rridresult));
+			rridresult.rid = hfa384x2host_16(ctlx->outbuf.rridreq.rid);
+		} else {
+			usbctlx_get_rridresult(&ctlx->inbuf.rridresp, &rridresult);
+		}
+
+		ctlx->usercb(hw, &rridresult, ctlx->usercb_data);
+	}
+
+	DBFEXIT;
+}
+
+static inline int
+hfa384x_docmd_wait(hfa384x_t *hw, hfa384x_metacmd_t *cmd)
+{
+	return hfa384x_docmd(hw, DOWAIT, cmd, NULL, NULL, NULL);
+}
+
+static inline int
+hfa384x_docmd_async(hfa384x_t *hw,
+                    hfa384x_metacmd_t *cmd,
+                    ctlx_cmdcb_t cmdcb,
+                    ctlx_usercb_t usercb,
+                    void *usercb_data)
+{
+	return hfa384x_docmd(hw, DOASYNC, cmd,
+	                        cmdcb, usercb, usercb_data);
+}
+
+static inline int
+hfa384x_dorrid_wait(hfa384x_t *hw, UINT16 rid, void *riddata, UINT riddatalen)
+{
+	return hfa384x_dorrid(hw, DOWAIT,
+	                      rid, riddata, riddatalen,
+	                      NULL, NULL, NULL);
+}
+
+static inline int
+hfa384x_dorrid_async(hfa384x_t *hw,
+                     UINT16 rid, void *riddata, UINT riddatalen,
+                     ctlx_cmdcb_t cmdcb,
+                     ctlx_usercb_t usercb,
+                     void *usercb_data)
+{
+	return hfa384x_dorrid(hw, DOASYNC,
+	                      rid, riddata, riddatalen,
+	                      cmdcb, usercb, usercb_data);
+}
+
+static inline int
+hfa384x_dowrid_wait(hfa384x_t *hw, UINT16 rid, void *riddata, UINT riddatalen)
+{
+	return hfa384x_dowrid(hw, DOWAIT,
+	                      rid, riddata, riddatalen,
+	                      NULL, NULL, NULL);
+}
+
+static inline int
+hfa384x_dowrid_async(hfa384x_t *hw,
+                     UINT16 rid, void *riddata, UINT riddatalen,
+                     ctlx_cmdcb_t cmdcb,
+                     ctlx_usercb_t usercb,
+                     void *usercb_data)
+{
+	return hfa384x_dowrid(hw, DOASYNC,
+	                      rid, riddata, riddatalen,
+	                      cmdcb, usercb, usercb_data);
+}
+
+static inline int
+hfa384x_dormem_wait(hfa384x_t *hw,
+                    UINT16 page, UINT16 offset, void *data, UINT len)
+{
+	return hfa384x_dormem(hw, DOWAIT,
+	                      page, offset, data, len,
+	                      NULL, NULL, NULL);
+}
+
+static inline int
+hfa384x_dormem_async(hfa384x_t *hw,
+                     UINT16 page, UINT16 offset, void *data, UINT len,
+                     ctlx_cmdcb_t cmdcb,
+                     ctlx_usercb_t usercb,
+                     void *usercb_data)
+{
+	return hfa384x_dormem(hw, DOASYNC,
+	                      page, offset, data, len,
+	                      cmdcb, usercb, usercb_data);
+}
+
+static inline int
+hfa384x_dowmem_wait(
+        hfa384x_t *hw,
+        UINT16  page,
+        UINT16  offset,
+        void    *data,
+        UINT    len)
+{
+	return hfa384x_dowmem(hw, DOWAIT,
+                                  page, offset, data, len,
+	                          NULL, NULL, NULL);
+}
+
+static inline int
+hfa384x_dowmem_async(
+        hfa384x_t *hw,
+        UINT16  page,
+        UINT16  offset,
+        void    *data,
+        UINT    len,
+        ctlx_cmdcb_t cmdcb,
+        ctlx_usercb_t usercb,
+        void    *usercb_data)
+{
+	return hfa384x_dowmem(hw, DOASYNC,
+                                  page, offset, data, len,
+	                          cmdcb, usercb, usercb_data);
+}
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_initialize
+*
+* Issues the initialize command and sets the hw->state based
+* on the result.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int
+hfa384x_cmd_initialize(hfa384x_t *hw)
+{
+	int	result = 0;
+	int	i;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+
+	cmd.cmd = HFA384x_CMDCODE_INIT;
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+
+	WLAN_LOG_DEBUG(3,"cmdresp.init: "
+		"status=0x%04x, resp0=0x%04x, "
+		"resp1=0x%04x, resp2=0x%04x\n",
+		cmd.result.status,
+		cmd.result.resp0,
+		cmd.result.resp1,
+		cmd.result.resp2);
+	if ( result == 0 ) {
+		for ( i = 0; i < HFA384x_NUMPORTS_MAX; i++) {
+			hw->port_enabled[i] = 0;
+		}
+	}
+
+        hw->link_status = HFA384x_LINK_NOTCONNECTED;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_disable
+*
+* Issues the disable command to stop communications on one of
+* the MACs 'ports'.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_cmd_disable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DISABLE) |
+		  HFA384x_CMD_MACPORT_SET(macport);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_enable
+*
+* Issues the enable command to enable communications on one of
+* the MACs 'ports'.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_cmd_enable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_ENABLE) |
+		  HFA384x_CMD_MACPORT_SET(macport);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_notify
+*
+* Sends an info frame to the firmware to alter the behavior
+* of the f/w asynch processes.  Can only be called when the MAC
+* is in the enabled state.
+*
+* Arguments:
+*	hw		device structure
+*	reclaim		[0|1] indicates whether the given FID will
+*			be handed back (via Alloc event) for reuse.
+*			(host order)
+*	fid		FID of buffer containing the frame that was
+*			previously copied to MAC memory via the bap.
+*			(host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*	hw->resp0 will contain the FID being used by async notify
+*	process.  If reclaim==0, resp0 will be the same as the fid
+*	argument.  If reclaim==1, resp0 will be the different.
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_cmd_notify(hfa384x_t *hw, UINT16 reclaim, UINT16 fid,
+		       void *buf, UINT16 len)
+{
+#if 0
+	int	result = 0;
+	UINT16	cmd;
+	DBFENTER;
+	cmd =	HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_NOTIFY) |
+		HFA384x_CMD_RECL_SET(reclaim);
+	result = hfa384x_docmd_wait(hw, cmd);
+
+	DBFEXIT;
+	return result;
+#endif
+return 0;
+}
+
+
+#if 0
+/*----------------------------------------------------------------
+* hfa384x_cmd_inquiry
+*
+* Requests an info frame from the firmware.  The info frame will
+* be delivered asynchronously via the Info event.
+*
+* Arguments:
+*	hw		device structure
+*	fid		FID of the info frame requested. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_cmd_inquiry(hfa384x_t *hw, UINT16 fid)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_INQ);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+	DBFEXIT;
+	return result;
+}
+#endif
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_monitor
+*
+* Enables the 'monitor mode' of the MAC.  Here's the description of
+* monitor mode that I've received thus far:
+*
+*  "The "monitor mode" of operation is that the MAC passes all
+*  frames for which the PLCP checks are correct. All received
+*  MPDUs are passed to the host with MAC Port = 7, with a
+*  receive status of good, FCS error, or undecryptable. Passing
+*  certain MPDUs is a violation of the 802.11 standard, but useful
+*  for a debugging tool."  Normal communication is not possible
+*  while monitor mode is enabled.
+*
+* Arguments:
+*	hw		device structure
+*	enable		a code (0x0b|0x0f) that enables/disables
+*			monitor mode. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_cmd_monitor(hfa384x_t *hw, UINT16 enable)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_MONITOR) |
+		HFA384x_CMD_AINFO_SET(enable);
+	cmd.parm0 = 0;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_cmd_download
+*
+* Sets the controls for the MAC controller code/data download
+* process.  The arguments set the mode and address associated
+* with a download.  Note that the aux registers should be enabled
+* prior to setting one of the download enable modes.
+*
+* Arguments:
+*	hw		device structure
+*	mode		0 - Disable programming and begin code exec
+*			1 - Enable volatile mem programming
+*			2 - Enable non-volatile mem programming
+*			3 - Program non-volatile section from NV download
+*			    buffer.
+*			(host order)
+*	lowaddr
+*	highaddr	For mode 1, sets the high & low order bits of
+*			the "destination address".  This address will be
+*			the execution start address when download is
+*			subsequently disabled.
+*			For mode 2, sets the high & low order bits of
+*			the destination in NV ram.
+*			For modes 0 & 3, should be zero. (host order)
+*			NOTE: these are CMD format.
+*	codelen		Length of the data to write in mode 2,
+*			zero otherwise. (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_cmd_download(hfa384x_t *hw, UINT16 mode, UINT16 lowaddr,
+				UINT16 highaddr, UINT16 codelen)
+{
+	int	result = 0;
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+	WLAN_LOG_DEBUG(5,
+		"mode=%d, lowaddr=0x%04x, highaddr=0x%04x, codelen=%d\n",
+		mode, lowaddr, highaddr, codelen);
+
+	cmd.cmd = (HFA384x_CMD_CMDCODE_SET(HFA384x_CMDCODE_DOWNLD) |
+		   HFA384x_CMD_PROGMODE_SET(mode));
+
+	cmd.parm0 = lowaddr;
+	cmd.parm1 = highaddr;
+	cmd.parm2 = codelen;
+
+	result = hfa384x_docmd_wait(hw, &cmd);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_copy_from_aux
+*
+* Copies a collection of bytes from the controller memory.  The
+* Auxiliary port MUST be enabled prior to calling this function.
+* We _might_ be in a download state.
+*
+* Arguments:
+*	hw		device structure
+*	cardaddr	address in hfa384x data space to read
+*	auxctl		address space select
+*	buf		ptr to destination host buffer
+*	len		length of data to transfer (in bytes)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	buf contains the data copied
+*
+* Call context:
+*	process
+*	interrupt
+----------------------------------------------------------------*/
+void
+hfa384x_copy_from_aux(
+	hfa384x_t *hw, UINT32 cardaddr, UINT32 auxctl, void *buf, UINT len)
+{
+	DBFENTER;
+	WLAN_LOG_ERROR("not used in USB.\n");
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_copy_to_aux
+*
+* Copies a collection of bytes to the controller memory.  The
+* Auxiliary port MUST be enabled prior to calling this function.
+* We _might_ be in a download state.
+*
+* Arguments:
+*	hw		device structure
+*	cardaddr	address in hfa384x data space to read
+*	auxctl		address space select
+*	buf		ptr to destination host buffer
+*	len		length of data to transfer (in bytes)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	Controller memory now contains a copy of buf
+*
+* Call context:
+*	process
+*	interrupt
+----------------------------------------------------------------*/
+void
+hfa384x_copy_to_aux(
+	hfa384x_t *hw, UINT32 cardaddr, UINT32 auxctl, void *buf, UINT len)
+{
+	DBFENTER;
+	WLAN_LOG_ERROR("not used in USB.\n");
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_corereset
+*
+* Perform a reset of the hfa38xx MAC core.  We assume that the hw
+* structure is in its "created" state.  That is, it is initialized
+* with proper values.  Note that if a reset is done after the
+* device has been active for awhile, the caller might have to clean
+* up some leftover cruft in the hw structure.
+*
+* Arguments:
+*	hw		device structure
+*	holdtime	how long (in ms) to hold the reset
+*	settletime	how long (in ms) to wait after releasing
+*			the reset
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
+{
+#if 0
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	struct usb_device	*parent = hw->usb->parent;
+	int			i;
+	int			port = -1;
+#endif
+#endif
+	int 			result = 0;
+
+
+#define P2_USB_RT_PORT		(USB_TYPE_CLASS | USB_RECIP_OTHER)
+#define P2_USB_FEAT_RESET	4
+#define P2_USB_FEAT_C_RESET	20
+
+	DBFENTER;
+
+#if 0
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	/* Find the hub port */
+	for ( i = 0; i < parent->maxchild; i++) {
+		if (parent->children[i] == hw->usb) {
+			port = i;
+			break;
+		}
+	}
+	if (port < 0) return -ENOENT;
+
+	/* Set and clear the reset */
+	usb_control_msg(parent, usb_sndctrlpipe(parent, 0),
+		USB_REQ_SET_FEATURE, P2_USB_RT_PORT, P2_USB_FEAT_RESET,
+		port+1, NULL, 0, 1*HZ);
+	wait_ms(holdtime);
+	usb_control_msg(parent, usb_sndctrlpipe(parent, 0),
+		USB_REQ_CLEAR_FEATURE, P2_USB_RT_PORT, P2_USB_FEAT_C_RESET,
+		port+1, NULL, 0, 1*HZ);
+	wait_ms(settletime);
+
+	/* Set the device address */
+	result=usb_set_address(hw->usb);
+	if (result < 0) {
+		WLAN_LOG_ERROR("reset_usbdev: Dev not accepting address, "
+			"result=%d\n", result);
+		clear_bit(hw->usb->devnum, &hw->usb->bus->devmap.devicemap);
+		hw->usb->devnum = -1;
+		goto done;
+	}
+	/* Let the address settle */
+	wait_ms(20);
+
+	/* Assume we're reusing the original descriptor data */
+
+	/* Set the configuration. */
+	WLAN_LOG_DEBUG(3, "Setting Configuration %d\n",
+		hw->usb->config[0].bConfigurationValue);
+	result=usb_set_configuration(hw->usb, hw->usb->config[0].bConfigurationValue);
+	if ( result ) {
+		WLAN_LOG_ERROR("usb_set_configuration() failed, result=%d.\n",
+				result);
+		goto done;
+	}
+	/* Let the configuration settle */
+	wait_ms(20);
+
+ done:
+#else
+	result=usb_reset_device(hw->usb);
+	if(result<0) {
+		WLAN_LOG_ERROR("usb_reset_device() failed, result=%d.\n",result);
+	}
+#endif
+#endif
+
+	result=usb_reset_device(hw->usb);
+	if(result<0) {
+		WLAN_LOG_ERROR("usb_reset_device() failed, result=%d.\n",result);
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlx_complete_sync
+*
+* Waits for a synchronous CTLX object to complete,
+* and then handles the response.
+*
+* Arguments:
+*	hw		device structure
+*	ctlx	 	CTLX ptr
+*	completor	functor object to decide what to
+*			do with the CTLX's result.
+*
+* Returns:
+*	0		Success
+*	-ERESTARTSYS	Interrupted by a signal
+*	-EIO		CTLX failed
+*	-ENODEV		Adapter was unplugged
+*	???		Result from completor
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+static int hfa384x_usbctlx_complete_sync(hfa384x_t *hw,
+					 hfa384x_usbctlx_t *ctlx,
+					 usbctlx_completor_t *completor)
+{
+	unsigned long flags;
+	int result;
+
+	DBFENTER;
+
+	result = wait_for_completion_interruptible(&ctlx->done);
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/*
+	 * We can only handle the CTLX if the USB disconnect
+	 * function has not run yet ...
+	 */
+	cleanup:
+	if ( hw->wlandev->hwremoved )
+	{
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+		result = -ENODEV;
+	}
+	else if ( result != 0 )
+	{
+		int runqueue = 0;
+
+		/*
+		 * We were probably interrupted, so delete
+		 * this CTLX asynchronously, kill the timers
+		 * and the URB, and then start the next
+		 * pending CTLX.
+		 *
+		 * NOTE: We can only delete the timers and
+		 *       the URB if this CTLX is active.
+		 */
+		if (ctlx == get_active_ctlx(hw))
+		{
+			spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+			del_singleshot_timer_sync(&hw->reqtimer);
+			del_singleshot_timer_sync(&hw->resptimer);
+			hw->req_timer_done = 1;
+			hw->resp_timer_done = 1;
+			usb_kill_urb(&hw->ctlx_urb);
+
+			spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+			runqueue = 1;
+
+			/*
+			 * This scenario is so unlikely that I'm
+			 * happy with a grubby "goto" solution ...
+			 */
+			if ( hw->wlandev->hwremoved )
+				goto cleanup;
+		}
+
+		/*
+		 * The completion task will send this CTLX
+		 * to the reaper the next time it runs. We
+		 * are no longer in a hurry.
+		 */
+		ctlx->reapable = 1;
+		ctlx->state = CTLX_REQ_FAILED;
+		list_move_tail(&ctlx->list, &hw->ctlxq.completing);
+
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+		if (runqueue)
+			hfa384x_usbctlxq_run(hw);
+	} else {
+		if (ctlx->state == CTLX_COMPLETE) {
+			result = completor->complete(completor);
+		} else {
+			WLAN_LOG_WARNING("CTLX[%d] error: state(%s)\n",
+			                 hfa384x2host_16(ctlx->outbuf.type),
+			                 ctlxstr(ctlx->state));
+			result = -EIO;
+		}
+
+		list_del(&ctlx->list);
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+		kfree(ctlx);
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_docmd
+*
+* Constructs a command CTLX and submits it.
+*
+* NOTE: Any changes to the 'post-submit' code in this function
+*       need to be carried over to hfa384x_cbcmd() since the handling
+*       is virtually identical.
+*
+* Arguments:
+*	hw		device structure
+*	mode		DOWAIT or DOASYNC
+*       cmd             cmd structure.  Includes all arguments and result
+*                       data points.  All in host order. in host order
+*	cmdcb		command-specific callback
+*	usercb		user callback for async calls, NULL for DOWAIT calls
+*	usercb_data	user supplied data pointer for async calls, NULL
+*			for DOASYNC calls
+*
+* Returns:
+*	0		success
+*	-EIO		CTLX failure
+*	-ERESTARTSYS	Awakened on signal
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+static int
+hfa384x_docmd(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	hfa384x_metacmd_t *cmd,
+	ctlx_cmdcb_t	cmdcb,
+	ctlx_usercb_t	usercb,
+	void	*usercb_data)
+{
+	int			result;
+	hfa384x_usbctlx_t	*ctlx;
+
+	DBFENTER;
+	ctlx = usbctlx_alloc();
+	if ( ctlx == NULL ) {
+		result = -ENOMEM;
+		goto done;
+	}
+
+	/* Initialize the command */
+	ctlx->outbuf.cmdreq.type = 	host2hfa384x_16(HFA384x_USB_CMDREQ);
+	ctlx->outbuf.cmdreq.cmd =	host2hfa384x_16(cmd->cmd);
+	ctlx->outbuf.cmdreq.parm0 =	host2hfa384x_16(cmd->parm0);
+	ctlx->outbuf.cmdreq.parm1 =	host2hfa384x_16(cmd->parm1);
+	ctlx->outbuf.cmdreq.parm2 =	host2hfa384x_16(cmd->parm2);
+
+	ctlx->outbufsize = sizeof(ctlx->outbuf.cmdreq);
+
+	WLAN_LOG_DEBUG(4, "cmdreq: cmd=0x%04x "
+		"parm0=0x%04x parm1=0x%04x parm2=0x%04x\n",
+		cmd->cmd,
+		cmd->parm0,
+		cmd->parm1,
+		cmd->parm2);
+
+	ctlx->reapable = mode;
+	ctlx->cmdcb = cmdcb;
+	ctlx->usercb = usercb;
+	ctlx->usercb_data = usercb_data;
+
+	result = hfa384x_usbctlx_submit(hw, ctlx);
+	if (result != 0) {
+		kfree(ctlx);
+	} else if (mode == DOWAIT) {
+		usbctlx_cmd_completor_t completor;
+
+		result = hfa384x_usbctlx_complete_sync(
+		             hw, ctlx, init_cmd_completor(&completor,
+		                                          &ctlx->inbuf.cmdresp,
+		                                          &cmd->result) );
+	}
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_dorrid
+*
+* Constructs a read rid CTLX and issues it.
+*
+* NOTE: Any changes to the 'post-submit' code in this function
+*       need to be carried over to hfa384x_cbrrid() since the handling
+*       is virtually identical.
+*
+* Arguments:
+*	hw		device structure
+*	mode		DOWAIT or DOASYNC
+*	rid		Read RID number (host order)
+*	riddata		Caller supplied buffer that MAC formatted RID.data
+*			record will be written to for DOWAIT calls. Should
+*			be NULL for DOASYNC calls.
+*	riddatalen	Buffer length for DOWAIT calls. Zero for DOASYNC calls.
+*	cmdcb		command callback for async calls, NULL for DOWAIT calls
+*	usercb		user callback for async calls, NULL for DOWAIT calls
+*	usercb_data	user supplied data pointer for async calls, NULL
+*			for DOWAIT calls
+*
+* Returns:
+*	0		success
+*	-EIO		CTLX failure
+*	-ERESTARTSYS	Awakened on signal
+*	-ENODATA	riddatalen != macdatalen
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+* Call context:
+*	interrupt (DOASYNC)
+*	process (DOWAIT or DOASYNC)
+----------------------------------------------------------------*/
+static int
+hfa384x_dorrid(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	rid,
+	void	*riddata,
+	UINT	riddatalen,
+        ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data)
+{
+	int			result;
+	hfa384x_usbctlx_t	*ctlx;
+
+	DBFENTER;
+	ctlx = usbctlx_alloc();
+	if ( ctlx == NULL ) {
+		result = -ENOMEM;
+		goto done;
+	}
+
+	/* Initialize the command */
+	ctlx->outbuf.rridreq.type =   host2hfa384x_16(HFA384x_USB_RRIDREQ);
+	ctlx->outbuf.rridreq.frmlen =
+		host2hfa384x_16(sizeof(ctlx->outbuf.rridreq.rid));
+	ctlx->outbuf.rridreq.rid =    host2hfa384x_16(rid);
+
+	ctlx->outbufsize = sizeof(ctlx->outbuf.rridreq);
+
+	ctlx->reapable = mode;
+	ctlx->cmdcb = cmdcb;
+	ctlx->usercb = usercb;
+	ctlx->usercb_data = usercb_data;
+
+	/* Submit the CTLX */
+	result = hfa384x_usbctlx_submit(hw, ctlx);
+	if (result != 0) {
+		kfree(ctlx);
+	} else if (mode == DOWAIT) {
+		usbctlx_rrid_completor_t completor;
+
+		result = hfa384x_usbctlx_complete_sync(
+		           hw, ctlx, init_rrid_completor(&completor,
+		                                         &ctlx->inbuf.rridresp,
+		                                         riddata,
+		                                         riddatalen) );
+	}
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_dowrid
+*
+* Constructs a write rid CTLX and issues it.
+*
+* NOTE: Any changes to the 'post-submit' code in this function
+*       need to be carried over to hfa384x_cbwrid() since the handling
+*       is virtually identical.
+*
+* Arguments:
+*	hw		device structure
+*	CMD_MODE	DOWAIT or DOASYNC
+*	rid		RID code
+*	riddata		Data portion of RID formatted for MAC
+*	riddatalen	Length of the data portion in bytes
+*       cmdcb           command callback for async calls, NULL for DOWAIT calls
+*	usercb		user callback for async calls, NULL for DOWAIT calls
+*	usercb_data	user supplied data pointer for async calls
+*
+* Returns:
+*	0		success
+*	-ETIMEDOUT	timed out waiting for register ready or
+*			command completion
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+* Call context:
+*	interrupt (DOASYNC)
+*	process (DOWAIT or DOASYNC)
+----------------------------------------------------------------*/
+static int
+hfa384x_dowrid(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	rid,
+	void	*riddata,
+	UINT	riddatalen,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data)
+{
+	int			result;
+	hfa384x_usbctlx_t	*ctlx;
+
+	DBFENTER;
+	ctlx = usbctlx_alloc();
+	if ( ctlx == NULL ) {
+		result = -ENOMEM;
+		goto done;
+	}
+
+	/* Initialize the command */
+	ctlx->outbuf.wridreq.type =   host2hfa384x_16(HFA384x_USB_WRIDREQ);
+	ctlx->outbuf.wridreq.frmlen = host2hfa384x_16(
+					(sizeof(ctlx->outbuf.wridreq.rid) +
+					riddatalen + 1) / 2);
+	ctlx->outbuf.wridreq.rid =    host2hfa384x_16(rid);
+	memcpy(ctlx->outbuf.wridreq.data, riddata, riddatalen);
+
+	ctlx->outbufsize = sizeof(ctlx->outbuf.wridreq.type) +
+	                   sizeof(ctlx->outbuf.wridreq.frmlen) +
+	                   sizeof(ctlx->outbuf.wridreq.rid) +
+	                   riddatalen;
+
+	ctlx->reapable = mode;
+	ctlx->cmdcb = cmdcb;
+	ctlx->usercb = usercb;
+	ctlx->usercb_data = usercb_data;
+
+	/* Submit the CTLX */
+	result = hfa384x_usbctlx_submit(hw, ctlx);
+	if (result != 0) {
+		kfree(ctlx);
+	} else if (mode == DOWAIT) {
+		usbctlx_wrid_completor_t completor;
+		hfa384x_cmdresult_t wridresult;
+
+		result = hfa384x_usbctlx_complete_sync(
+		               hw,
+		               ctlx,
+		               init_wrid_completor(&completor,
+		                                   &ctlx->inbuf.wridresp,
+		                                   &wridresult) );
+	}
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_dormem
+*
+* Constructs a readmem CTLX and issues it.
+*
+* NOTE: Any changes to the 'post-submit' code in this function
+*       need to be carried over to hfa384x_cbrmem() since the handling
+*       is virtually identical.
+*
+* Arguments:
+*	hw		device structure
+*	mode		DOWAIT or DOASYNC
+*	page		MAC address space page (CMD format)
+*	offset		MAC address space offset
+*	data		Ptr to data buffer to receive read
+*	len		Length of the data to read (max == 2048)
+*	cmdcb		command callback for async calls, NULL for DOWAIT calls
+*	usercb		user callback for async calls, NULL for DOWAIT calls
+*	usercb_data	user supplied data pointer for async calls
+*
+* Returns:
+*	0		success
+*	-ETIMEDOUT	timed out waiting for register ready or
+*			command completion
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+* Call context:
+*	interrupt (DOASYNC)
+*	process (DOWAIT or DOASYNC)
+----------------------------------------------------------------*/
+static int
+hfa384x_dormem(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	page,
+	UINT16	offset,
+	void	*data,
+	UINT	len,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data)
+{
+	int			result;
+	hfa384x_usbctlx_t	*ctlx;
+
+	DBFENTER;
+	ctlx = usbctlx_alloc();
+	if ( ctlx == NULL ) {
+		result = -ENOMEM;
+		goto done;
+	}
+
+	/* Initialize the command */
+	ctlx->outbuf.rmemreq.type =    host2hfa384x_16(HFA384x_USB_RMEMREQ);
+	ctlx->outbuf.rmemreq.frmlen =  host2hfa384x_16(
+					sizeof(ctlx->outbuf.rmemreq.offset) +
+					sizeof(ctlx->outbuf.rmemreq.page) +
+					len);
+	ctlx->outbuf.rmemreq.offset =	host2hfa384x_16(offset);
+	ctlx->outbuf.rmemreq.page =	host2hfa384x_16(page);
+
+	ctlx->outbufsize = sizeof(ctlx->outbuf.rmemreq);
+
+	WLAN_LOG_DEBUG(4,
+		"type=0x%04x frmlen=%d offset=0x%04x page=0x%04x\n",
+		ctlx->outbuf.rmemreq.type,
+		ctlx->outbuf.rmemreq.frmlen,
+		ctlx->outbuf.rmemreq.offset,
+		ctlx->outbuf.rmemreq.page);
+
+	WLAN_LOG_DEBUG(4,"pktsize=%zd\n",
+		ROUNDUP64(sizeof(ctlx->outbuf.rmemreq)));
+
+	ctlx->reapable = mode;
+	ctlx->cmdcb = cmdcb;
+	ctlx->usercb = usercb;
+	ctlx->usercb_data = usercb_data;
+
+	result = hfa384x_usbctlx_submit(hw, ctlx);
+	if (result != 0) {
+		kfree(ctlx);
+	} else if ( mode == DOWAIT ) {
+                usbctlx_rmem_completor_t completor;
+
+                result = hfa384x_usbctlx_complete_sync(
+                           hw, ctlx, init_rmem_completor(&completor,
+                                                         &ctlx->inbuf.rmemresp,
+                                                         data,
+                                                         len) );
+	}
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+
+/*----------------------------------------------------------------
+* hfa384x_dowmem
+*
+* Constructs a writemem CTLX and issues it.
+*
+* NOTE: Any changes to the 'post-submit' code in this function
+*       need to be carried over to hfa384x_cbwmem() since the handling
+*       is virtually identical.
+*
+* Arguments:
+*	hw		device structure
+*	mode		DOWAIT or DOASYNC
+*	page		MAC address space page (CMD format)
+*	offset		MAC address space offset
+*	data		Ptr to data buffer containing write data
+*	len		Length of the data to read (max == 2048)
+*	cmdcb		command callback for async calls, NULL for DOWAIT calls
+*	usercb		user callback for async calls, NULL for DOWAIT calls
+*	usercb_data	user supplied data pointer for async calls.
+*
+* Returns:
+*	0		success
+*	-ETIMEDOUT	timed out waiting for register ready or
+*			command completion
+*	>0		command indicated error, Status and Resp0-2 are
+*			in hw structure.
+*
+* Side effects:
+*
+* Call context:
+*	interrupt (DOWAIT)
+*	process (DOWAIT or DOASYNC)
+----------------------------------------------------------------*/
+static int
+hfa384x_dowmem(
+	hfa384x_t *hw,
+	CMD_MODE mode,
+	UINT16	page,
+	UINT16	offset,
+	void	*data,
+	UINT	len,
+	ctlx_cmdcb_t cmdcb,
+	ctlx_usercb_t usercb,
+	void	*usercb_data)
+{
+	int			result;
+	hfa384x_usbctlx_t	*ctlx;
+
+	DBFENTER;
+	WLAN_LOG_DEBUG(5, "page=0x%04x offset=0x%04x len=%d\n",
+		page,offset,len);
+
+	ctlx = usbctlx_alloc();
+	if ( ctlx == NULL ) {
+		result = -ENOMEM;
+		goto done;
+	}
+
+	/* Initialize the command */
+	ctlx->outbuf.wmemreq.type =   host2hfa384x_16(HFA384x_USB_WMEMREQ);
+	ctlx->outbuf.wmemreq.frmlen = host2hfa384x_16(
+					sizeof(ctlx->outbuf.wmemreq.offset) +
+					sizeof(ctlx->outbuf.wmemreq.page) +
+					len);
+	ctlx->outbuf.wmemreq.offset = host2hfa384x_16(offset);
+	ctlx->outbuf.wmemreq.page =   host2hfa384x_16(page);
+	memcpy(ctlx->outbuf.wmemreq.data, data, len);
+
+	ctlx->outbufsize = sizeof(ctlx->outbuf.wmemreq.type) +
+	                   sizeof(ctlx->outbuf.wmemreq.frmlen) +
+	                   sizeof(ctlx->outbuf.wmemreq.offset) +
+	                   sizeof(ctlx->outbuf.wmemreq.page) +
+	                   len;
+
+	ctlx->reapable = mode;
+	ctlx->cmdcb = cmdcb;
+	ctlx->usercb = usercb;
+	ctlx->usercb_data = usercb_data;
+
+	result = hfa384x_usbctlx_submit(hw, ctlx);
+	if (result != 0) {
+		kfree(ctlx);
+	} else if ( mode == DOWAIT ) {
+                usbctlx_wmem_completor_t completor;
+                hfa384x_cmdresult_t wmemresult;
+
+                result = hfa384x_usbctlx_complete_sync(
+                               hw,
+                               ctlx,
+                               init_wmem_completor(&completor,
+                                                   &ctlx->inbuf.wmemresp,
+                                                   &wmemresult) );
+	}
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_commtallies
+*
+* Send a commtallies inquiry to the MAC.  Note that this is an async
+* call that will result in an info frame arriving sometime later.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	zero		success.
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_commtallies( hfa384x_t *hw )
+{
+	hfa384x_metacmd_t cmd;
+
+	DBFENTER;
+
+	cmd.cmd = HFA384x_CMDCODE_INQ;
+	cmd.parm0 = HFA384x_IT_COMMTALLIES;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+	hfa384x_docmd_async(hw, &cmd, NULL, NULL, NULL);
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_disable
+*
+* Issues the disable command to stop communications on one of
+* the MACs 'ports'.  Only macport 0 is valid  for stations.
+* APs may also disable macports 1-6.  Only ports that have been
+* previously enabled may be disabled.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number (host order)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_disable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+
+	DBFENTER;
+	if ((!hw->isap && macport != 0) ||
+	    (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
+	    !(hw->port_enabled[macport]) ){
+		result = -EINVAL;
+	} else {
+		result = hfa384x_cmd_disable(hw, macport);
+		if ( result == 0 ) {
+			hw->port_enabled[macport] = 0;
+		}
+	}
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_enable
+*
+* Issues the enable command to enable communications on one of
+* the MACs 'ports'.  Only macport 0 is valid  for stations.
+* APs may also enable macports 1-6.  Only ports that are currently
+* disabled may be enabled.
+*
+* Arguments:
+*	hw		device structure
+*	macport		MAC port number
+*
+* Returns:
+*	0		success
+*	>0		f/w reported failure - f/w status code
+*	<0		driver reported error (timeout|bad arg)
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_enable(hfa384x_t *hw, UINT16 macport)
+{
+	int	result = 0;
+
+	DBFENTER;
+	if ((!hw->isap && macport != 0) ||
+	    (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
+	    (hw->port_enabled[macport]) ){
+		result = -EINVAL;
+	} else {
+		result = hfa384x_cmd_enable(hw, macport);
+		if ( result == 0 ) {
+			hw->port_enabled[macport] = 1;
+		}
+	}
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_flashdl_enable
+*
+* Begins the flash download state.  Checks to see that we're not
+* already in a download state and that a port isn't enabled.
+* Sets the download state and retrieves the flash download
+* buffer location, buffer size, and timeout length.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_flashdl_enable(hfa384x_t *hw)
+{
+	int		result = 0;
+	int		i;
+
+	DBFENTER;
+	/* Check that a port isn't active */
+	for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
+		if ( hw->port_enabled[i] ) {
+			WLAN_LOG_DEBUG(1,"called when port enabled.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Check that we're not already in a download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
+		return -EINVAL;
+	}
+
+	/* Retrieve the buffer loc&size and timeout */
+	if ( (result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DOWNLOADBUFFER,
+				&(hw->bufinfo), sizeof(hw->bufinfo))) ) {
+		return result;
+	}
+	hw->bufinfo.page = hfa384x2host_16(hw->bufinfo.page);
+	hw->bufinfo.offset = hfa384x2host_16(hw->bufinfo.offset);
+	hw->bufinfo.len = hfa384x2host_16(hw->bufinfo.len);
+	if ( (result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_MAXLOADTIME,
+				&(hw->dltimeout))) ) {
+		return result;
+	}
+	hw->dltimeout = hfa384x2host_16(hw->dltimeout);
+
+	WLAN_LOG_DEBUG(1,"flashdl_enable\n");
+
+	hw->dlstate = HFA384x_DLSTATE_FLASHENABLED;
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_flashdl_disable
+*
+* Ends the flash download state.  Note that this will cause the MAC
+* firmware to restart.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_flashdl_disable(hfa384x_t *hw)
+{
+	DBFENTER;
+	/* Check that we're already in the download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_FLASHENABLED ) {
+		return -EINVAL;
+	}
+
+	WLAN_LOG_DEBUG(1,"flashdl_enable\n");
+
+	/* There isn't much we can do at this point, so I don't */
+	/*  bother  w/ the return value */
+	hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0 , 0);
+	hw->dlstate = HFA384x_DLSTATE_DISABLED;
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_flashdl_write
+*
+* Performs a FLASH download of a chunk of data. First checks to see
+* that we're in the FLASH download state, then sets the download
+* mode, uses the aux functions to 1) copy the data to the flash
+* buffer, 2) sets the download 'write flash' mode, 3) readback and
+* compare.  Lather rinse, repeat as many times an necessary to get
+* all the given data into flash.
+* When all data has been written using this function (possibly
+* repeatedly), call drvr_flashdl_disable() to end the download state
+* and restart the MAC.
+*
+* Arguments:
+*	hw		device structure
+*	daddr		Card address to write to. (host order)
+*	buf		Ptr to data to write.
+*	len		Length of data (host order).
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int
+hfa384x_drvr_flashdl_write(
+	hfa384x_t	*hw,
+	UINT32		daddr,
+	void		*buf,
+	UINT32		len)
+{
+	int		result = 0;
+	UINT32		dlbufaddr;
+	int		nburns;
+	UINT32		burnlen;
+	UINT32		burndaddr;
+	UINT16		burnlo;
+	UINT16		burnhi;
+	int		nwrites;
+	UINT8		*writebuf;
+	UINT16		writepage;
+	UINT16		writeoffset;
+	UINT32		writelen;
+	int		i;
+	int		j;
+
+	DBFENTER;
+	WLAN_LOG_DEBUG(5,"daddr=0x%08x len=%d\n", daddr, len);
+
+	/* Check that we're in the flash download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_FLASHENABLED ) {
+		return -EINVAL;
+	}
+
+	WLAN_LOG_INFO("Download %d bytes to flash @0x%06x\n", len, daddr);
+
+	/* Convert to flat address for arithmetic */
+	/* NOTE: dlbuffer RID stores the address in AUX format */
+	dlbufaddr = HFA384x_ADDR_AUX_MKFLAT(
+			hw->bufinfo.page, hw->bufinfo.offset);
+	WLAN_LOG_DEBUG(5,
+		"dlbuf.page=0x%04x dlbuf.offset=0x%04x dlbufaddr=0x%08x\n",
+		hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr);
+
+#if 0
+WLAN_LOG_WARNING("dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr, hw->bufinfo.len, hw->dltimeout);
+#endif
+	/* Calculations to determine how many fills of the dlbuffer to do
+	 * and how many USB wmemreq's to do for each fill.  At this point
+	 * in time, the dlbuffer size and the wmemreq size are the same.
+	 * Therefore, nwrites should always be 1.  The extra complexity
+	 * here is a hedge against future changes.
+	 */
+
+	/* Figure out how many times to do the flash programming */
+	nburns = len / hw->bufinfo.len;
+	nburns += (len % hw->bufinfo.len) ? 1 : 0;
+
+	/* For each flash program cycle, how many USB wmemreq's are needed? */
+	nwrites = hw->bufinfo.len / HFA384x_USB_RWMEM_MAXLEN;
+	nwrites += (hw->bufinfo.len % HFA384x_USB_RWMEM_MAXLEN) ? 1 : 0;
+
+	/* For each burn */
+	for ( i = 0; i < nburns; i++) {
+		/* Get the dest address and len */
+		burnlen = (len - (hw->bufinfo.len * i)) > hw->bufinfo.len ?
+				hw->bufinfo.len :
+				(len - (hw->bufinfo.len * i));
+		burndaddr = daddr + (hw->bufinfo.len * i);
+		burnlo = HFA384x_ADDR_CMD_MKOFF(burndaddr);
+		burnhi = HFA384x_ADDR_CMD_MKPAGE(burndaddr);
+
+		WLAN_LOG_INFO("Writing %d bytes to flash @0x%06x\n",
+			burnlen, burndaddr);
+
+		/* Set the download mode */
+		result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NV,
+				burnlo, burnhi, burnlen);
+		if ( result ) {
+			WLAN_LOG_ERROR("download(NV,lo=%x,hi=%x,len=%x) "
+				"cmd failed, result=%d. Aborting d/l\n",
+				burnlo, burnhi, burnlen, result);
+			goto exit_proc;
+		}
+
+		/* copy the data to the flash download buffer */
+		for ( j=0; j < nwrites; j++) {
+			writebuf = buf +
+				(i*hw->bufinfo.len) +
+				(j*HFA384x_USB_RWMEM_MAXLEN);
+
+			writepage = HFA384x_ADDR_CMD_MKPAGE(
+					dlbufaddr +
+					(j*HFA384x_USB_RWMEM_MAXLEN));
+			writeoffset = HFA384x_ADDR_CMD_MKOFF(
+					dlbufaddr +
+					(j*HFA384x_USB_RWMEM_MAXLEN));
+
+			writelen = burnlen-(j*HFA384x_USB_RWMEM_MAXLEN);
+			writelen = writelen  > HFA384x_USB_RWMEM_MAXLEN ?
+					HFA384x_USB_RWMEM_MAXLEN :
+					writelen;
+
+			result = hfa384x_dowmem_wait( hw,
+					writepage,
+					writeoffset,
+					writebuf,
+					writelen );
+#if 0
+
+Comment out for debugging, assume the write was successful.
+			if (result) {
+				WLAN_LOG_ERROR(
+					"Write to dl buffer failed, "
+					"result=0x%04x. Aborting.\n",
+					result);
+				goto exit_proc;
+			}
+#endif
+
+		}
+
+		/* set the download 'write flash' mode */
+		result = hfa384x_cmd_download(hw,
+				HFA384x_PROGMODE_NVWRITE,
+				0,0,0);
+		if ( result ) {
+			WLAN_LOG_ERROR(
+				"download(NVWRITE,lo=%x,hi=%x,len=%x) "
+				"cmd failed, result=%d. Aborting d/l\n",
+				burnlo, burnhi, burnlen, result);
+			goto exit_proc;
+		}
+
+		/* TODO: We really should do a readback and compare. */
+	}
+
+exit_proc:
+
+	/* Leave the firmware in the 'post-prog' mode.  flashdl_disable will */
+	/*  actually disable programming mode.  Remember, that will cause the */
+	/*  the firmware to effectively reset itself. */
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_getconfig
+*
+* Performs the sequence necessary to read a config/info item.
+*
+* Arguments:
+*	hw		device structure
+*	rid		config/info record id (host order)
+*	buf		host side record buffer.  Upon return it will
+*			contain the body portion of the record (minus the
+*			RID and len).
+*	len		buffer length (in bytes, should match record length)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*	-ENODATA 	length mismatch between argument and retrieved
+*			record.
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_getconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len)
+{
+	int 			result;
+	DBFENTER;
+
+	result = hfa384x_dorrid_wait(hw, rid, buf, len);
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+ * hfa384x_drvr_getconfig_async
+ *
+ * Performs the sequence necessary to perform an async read of
+ * of a config/info item.
+ *
+ * Arguments:
+ *       hw              device structure
+ *       rid             config/info record id (host order)
+ *       buf             host side record buffer.  Upon return it will
+ *                       contain the body portion of the record (minus the
+ *                       RID and len).
+ *       len             buffer length (in bytes, should match record length)
+ *       cbfn            caller supplied callback, called when the command
+ *                       is done (successful or not).
+ *       cbfndata        pointer to some caller supplied data that will be
+ *                       passed in as an argument to the cbfn.
+ *
+ * Returns:
+ *       nothing         the cbfn gets a status argument identifying if
+ *                       any errors occur.
+ * Side effects:
+ *       Queues an hfa384x_usbcmd_t for subsequent execution.
+ *
+ * Call context:
+ *       Any
+ ----------------------------------------------------------------*/
+int
+hfa384x_drvr_getconfig_async(
+         hfa384x_t               *hw,
+         UINT16                  rid,
+         ctlx_usercb_t           usercb,
+         void                    *usercb_data)
+{
+         return hfa384x_dorrid_async(hw, rid, NULL, 0,
+				     hfa384x_cb_rrid, usercb, usercb_data);
+}
+
+/*----------------------------------------------------------------
+ * hfa384x_drvr_setconfig_async
+ *
+ * Performs the sequence necessary to write a config/info item.
+ *
+ * Arguments:
+ *       hw              device structure
+ *       rid             config/info record id (in host order)
+ *       buf             host side record buffer
+ *       len             buffer length (in bytes)
+ *       usercb          completion callback
+ *       usercb_data     completion callback argument
+ *
+ * Returns:
+ *       0               success
+ *       >0              f/w reported error - f/w status code
+ *       <0              driver reported error
+ *
+ * Side effects:
+ *
+ * Call context:
+ *       process
+ ----------------------------------------------------------------*/
+int
+hfa384x_drvr_setconfig_async(
+         hfa384x_t       *hw,
+         UINT16          rid,
+         void            *buf,
+         UINT16          len,
+         ctlx_usercb_t   usercb,
+         void            *usercb_data)
+{
+	return hfa384x_dowrid_async(hw, rid, buf, len,
+				    hfa384x_cb_status, usercb, usercb_data);
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_handover
+*
+* Sends a handover notification to the MAC.
+*
+* Arguments:
+*	hw		device structure
+*	addr		address of station that's left
+*
+* Returns:
+*	zero		success.
+*	-ERESTARTSYS	received signal while waiting for semaphore.
+*	-EIO		failed to write to bap, or failed in cmd.
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_handover( hfa384x_t *hw, UINT8 *addr)
+{
+        DBFENTER;
+	WLAN_LOG_ERROR("Not currently supported in USB!\n");
+	DBFEXIT;
+	return -EIO;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_low_level
+*
+* Write test commands to the card.  Some test commands don't make
+* sense without prior set-up.  For example, continous TX isn't very
+* useful until you set the channel.  That functionality should be
+*
+* Side effects:
+*
+* Call context:
+*      process thread
+* -----------------------------------------------------------------*/
+int hfa384x_drvr_low_level(hfa384x_t *hw, hfa384x_metacmd_t *cmd)
+{
+	int             result;
+	DBFENTER;
+
+	/* Do i need a host2hfa... conversion ? */
+
+	result = hfa384x_docmd_wait(hw, cmd);
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_mmi_read
+*
+* Read mmi registers.  mmi is intersil-speak for the baseband
+* processor registers.
+*
+* Arguments:
+*       hw              device structure
+*       register        The test register to be accessed (must be even #).
+*
+* Returns:
+*       0               success
+*       >0              f/w reported error - f/w status code
+*       <0              driver reported error
+*
+* Side effects:
+*
+* Call context:
+*       process
+----------------------------------------------------------------*/
+int hfa384x_drvr_mmi_read(hfa384x_t *hw, UINT32 addr, UINT32 *resp)
+{
+#if 0
+        int             result = 0;
+        UINT16  cmd_code = (UINT16) 0x30;
+        UINT16 param = (UINT16) addr;
+        DBFENTER;
+
+        /* Do i need a host2hfa... conversion ? */
+        result = hfa384x_docmd_wait(hw, cmd_code);
+
+        DBFEXIT;
+        return result;
+#endif
+return 0;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_mmi_write
+*
+* Read mmi registers.  mmi is intersil-speak for the baseband
+* processor registers.
+*
+* Arguments:
+*       hw              device structure
+*       addr            The test register to be accessed (must be even #).
+*       data            The data value to write to the register.
+*
+* Returns:
+*       0               success
+*       >0              f/w reported error - f/w status code
+*       <0              driver reported error
+*
+* Side effects:
+*
+* Call context:
+*       process
+----------------------------------------------------------------*/
+
+int
+hfa384x_drvr_mmi_write(hfa384x_t *hw, UINT32 addr, UINT32 data)
+{
+#if 0
+        int             result = 0;
+        UINT16  cmd_code = (UINT16) 0x31;
+        UINT16 param0 = (UINT16) addr;
+        UINT16 param1 = (UINT16) data;
+        DBFENTER;
+
+        WLAN_LOG_DEBUG(1,"mmi write : addr = 0x%08lx\n", addr);
+        WLAN_LOG_DEBUG(1,"mmi write : data = 0x%08lx\n", data);
+
+        /* Do i need a host2hfa... conversion ? */
+        result = hfa384x_docmd_wait(hw, cmd_code);
+
+        DBFEXIT;
+        return result;
+#endif
+return 0;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_ramdl_disable
+*
+* Ends the ram download state.
+*
+* Arguments:
+*	hw		device structure
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int
+hfa384x_drvr_ramdl_disable(hfa384x_t *hw)
+{
+	DBFENTER;
+	/* Check that we're already in the download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_RAMENABLED ) {
+		return -EINVAL;
+	}
+
+	WLAN_LOG_DEBUG(3,"ramdl_disable()\n");
+
+	/* There isn't much we can do at this point, so I don't */
+	/*  bother  w/ the return value */
+	hfa384x_cmd_download(hw, HFA384x_PROGMODE_DISABLE, 0, 0 , 0);
+	hw->dlstate = HFA384x_DLSTATE_DISABLED;
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_ramdl_enable
+*
+* Begins the ram download state.  Checks to see that we're not
+* already in a download state and that a port isn't enabled.
+* Sets the download state and calls cmd_download with the
+* ENABLE_VOLATILE subcommand and the exeaddr argument.
+*
+* Arguments:
+*	hw		device structure
+*	exeaddr		the card execution address that will be
+*                       jumped to when ramdl_disable() is called
+*			(host order).
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int
+hfa384x_drvr_ramdl_enable(hfa384x_t *hw, UINT32 exeaddr)
+{
+	int		result = 0;
+	UINT16		lowaddr;
+	UINT16		hiaddr;
+	int		i;
+	DBFENTER;
+	/* Check that a port isn't active */
+	for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
+		if ( hw->port_enabled[i] ) {
+			WLAN_LOG_ERROR(
+				"Can't download with a macport enabled.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Check that we're not already in a download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
+		WLAN_LOG_ERROR(
+			"Download state not disabled.\n");
+		return -EINVAL;
+	}
+
+	WLAN_LOG_DEBUG(3,"ramdl_enable, exeaddr=0x%08x\n", exeaddr);
+
+	/* Call the download(1,addr) function */
+	lowaddr = HFA384x_ADDR_CMD_MKOFF(exeaddr);
+	hiaddr =  HFA384x_ADDR_CMD_MKPAGE(exeaddr);
+
+	result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_RAM,
+			lowaddr, hiaddr, 0);
+
+	if ( result == 0) {
+		/* Set the download state */
+		hw->dlstate = HFA384x_DLSTATE_RAMENABLED;
+	} else {
+		WLAN_LOG_DEBUG(1,
+			"cmd_download(0x%04x, 0x%04x) failed, result=%d.\n",
+			lowaddr,
+			hiaddr,
+			result);
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_ramdl_write
+*
+* Performs a RAM download of a chunk of data. First checks to see
+* that we're in the RAM download state, then uses the [read|write]mem USB
+* commands to 1) copy the data, 2) readback and compare.  The download
+* state is unaffected.  When all data has been written using
+* this function, call drvr_ramdl_disable() to end the download state
+* and restart the MAC.
+*
+* Arguments:
+*	hw		device structure
+*	daddr		Card address to write to. (host order)
+*	buf		Ptr to data to write.
+*	len		Length of data (host order).
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int
+hfa384x_drvr_ramdl_write(hfa384x_t *hw, UINT32 daddr, void* buf, UINT32 len)
+{
+	int		result = 0;
+	int		nwrites;
+	UINT8		*data = buf;
+	int		i;
+	UINT32		curraddr;
+	UINT16		currpage;
+	UINT16		curroffset;
+	UINT16		currlen;
+	DBFENTER;
+	/* Check that we're in the ram download state */
+	if ( hw->dlstate != HFA384x_DLSTATE_RAMENABLED ) {
+		return -EINVAL;
+	}
+
+	WLAN_LOG_INFO("Writing %d bytes to ram @0x%06x\n", len, daddr);
+
+	/* How many dowmem calls?  */
+	nwrites = len / HFA384x_USB_RWMEM_MAXLEN;
+	nwrites += len % HFA384x_USB_RWMEM_MAXLEN ? 1 : 0;
+
+	/* Do blocking wmem's */
+	for(i=0; i < nwrites; i++) {
+		/* make address args */
+		curraddr = daddr + (i * HFA384x_USB_RWMEM_MAXLEN);
+		currpage = HFA384x_ADDR_CMD_MKPAGE(curraddr);
+		curroffset = HFA384x_ADDR_CMD_MKOFF(curraddr);
+		currlen = len - (i * HFA384x_USB_RWMEM_MAXLEN);
+		if ( currlen > HFA384x_USB_RWMEM_MAXLEN) {
+			currlen = HFA384x_USB_RWMEM_MAXLEN;
+		}
+
+	 	/* Do blocking ctlx */
+		result = hfa384x_dowmem_wait( hw,
+				currpage,
+				curroffset,
+				data + (i*HFA384x_USB_RWMEM_MAXLEN),
+				currlen );
+
+		if (result) break;
+
+		/* TODO: We really should have a readback. */
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_readpda
+*
+* Performs the sequence to read the PDA space.  Note there is no
+* drvr_writepda() function.  Writing a PDA is
+* generally implemented by a calling component via calls to
+* cmd_download and writing to the flash download buffer via the
+* aux regs.
+*
+* Arguments:
+*	hw		device structure
+*	buf		buffer to store PDA in
+*	len		buffer length
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*	-ETIMEOUT	timout waiting for the cmd regs to become
+*			available, or waiting for the control reg
+*			to indicate the Aux port is enabled.
+*	-ENODATA	the buffer does NOT contain a valid PDA.
+*			Either the card PDA is bad, or the auxdata
+*			reads are giving us garbage.
+
+*
+* Side effects:
+*
+* Call context:
+*	process or non-card interrupt.
+----------------------------------------------------------------*/
+int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, UINT len)
+{
+	int		result = 0;
+	UINT16		*pda = buf;
+	int		pdaok = 0;
+	int		morepdrs = 1;
+	int		currpdr = 0;	/* word offset of the current pdr */
+	size_t		i;
+	UINT16		pdrlen;		/* pdr length in bytes, host order */
+	UINT16		pdrcode;	/* pdr code, host order */
+	UINT16		currpage;
+	UINT16		curroffset;
+	struct pdaloc {
+		UINT32	cardaddr;
+		UINT16	auxctl;
+	} pdaloc[] =
+	{
+		{ HFA3842_PDA_BASE,		0},
+		{ HFA3841_PDA_BASE,		0},
+		{ HFA3841_PDA_BOGUS_BASE,	0}
+	};
+
+	DBFENTER;
+
+	/* Read the pda from each known address.  */
+	for ( i = 0; i < ARRAY_SIZE(pdaloc); i++) {
+		/* Make address */
+		currpage = HFA384x_ADDR_CMD_MKPAGE(pdaloc[i].cardaddr);
+		curroffset = HFA384x_ADDR_CMD_MKOFF(pdaloc[i].cardaddr);
+
+		result = hfa384x_dormem_wait(hw,
+			currpage,
+			curroffset,
+			buf,
+			len);		/* units of bytes */
+
+		if (result) {
+			WLAN_LOG_WARNING(
+					  "Read from index %zd failed, continuing\n",
+				i );
+			continue;
+		}
+
+		/* Test for garbage */
+		pdaok = 1;	/* initially assume good */
+		morepdrs = 1;
+		while ( pdaok && morepdrs ) {
+			pdrlen = hfa384x2host_16(pda[currpdr]) * 2;
+			pdrcode = hfa384x2host_16(pda[currpdr+1]);
+			/* Test the record length */
+			if ( pdrlen > HFA384x_PDR_LEN_MAX || pdrlen == 0) {
+				WLAN_LOG_ERROR("pdrlen invalid=%d\n",
+					pdrlen);
+				pdaok = 0;
+				break;
+			}
+			/* Test the code */
+			if ( !hfa384x_isgood_pdrcode(pdrcode) ) {
+				WLAN_LOG_ERROR("pdrcode invalid=%d\n",
+					pdrcode);
+				pdaok = 0;
+				break;
+			}
+			/* Test for completion */
+			if ( pdrcode == HFA384x_PDR_END_OF_PDA) {
+				morepdrs = 0;
+			}
+
+			/* Move to the next pdr (if necessary) */
+			if ( morepdrs ) {
+				/* note the access to pda[], need words here */
+				currpdr += hfa384x2host_16(pda[currpdr]) + 1;
+			}
+		}
+		if ( pdaok ) {
+			WLAN_LOG_INFO(
+				"PDA Read from 0x%08x in %s space.\n",
+				pdaloc[i].cardaddr,
+				pdaloc[i].auxctl == 0 ? "EXTDS" :
+				pdaloc[i].auxctl == 1 ? "NV" :
+				pdaloc[i].auxctl == 2 ? "PHY" :
+				pdaloc[i].auxctl == 3 ? "ICSRAM" :
+				"<bogus auxctl>");
+			break;
+		}
+	}
+	result = pdaok ? 0 : -ENODATA;
+
+	if ( result ) {
+		WLAN_LOG_DEBUG(3,"Failure: pda is not okay\n");
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_setconfig
+*
+* Performs the sequence necessary to write a config/info item.
+*
+* Arguments:
+*	hw		device structure
+*	rid		config/info record id (in host order)
+*	buf		host side record buffer
+*	len		buffer length (in bytes)
+*
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_setconfig(hfa384x_t *hw, UINT16 rid, void *buf, UINT16 len)
+{
+	return hfa384x_dowrid_wait(hw, rid, buf, len);
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_start
+*
+* Issues the MAC initialize command, sets up some data structures,
+* and enables the interrupts.  After this function completes, the
+* low-level stuff should be ready for any/all commands.
+*
+* Arguments:
+*	hw		device structure
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int hfa384x_drvr_start(hfa384x_t *hw)
+{
+	int		result;
+	DBFENTER;
+
+	might_sleep();
+
+	if (usb_clear_halt(hw->usb, hw->endp_in)) {
+		WLAN_LOG_ERROR(
+			"Failed to reset bulk in endpoint.\n");
+	}
+
+	if (usb_clear_halt(hw->usb, hw->endp_out)) {
+		WLAN_LOG_ERROR(
+			"Failed to reset bulk out endpoint.\n");
+	}
+
+	/* Synchronous unlink, in case we're trying to restart the driver */
+	usb_kill_urb(&hw->rx_urb);
+
+	/* Post the IN urb */
+	result = submit_rx_urb(hw, GFP_KERNEL);
+	if (result != 0) {
+		WLAN_LOG_ERROR(
+			"Fatal, failed to submit RX URB, result=%d\n",
+			result);
+		goto done;
+	}
+
+	/* call initialize */
+	result = hfa384x_cmd_initialize(hw);
+	if (result != 0) {
+		usb_kill_urb(&hw->rx_urb);
+		WLAN_LOG_ERROR(
+			"cmd_initialize() failed, result=%d\n",
+			result);
+		goto done;
+	}
+
+	hw->state = HFA384x_STATE_RUNNING;
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_stop
+*
+* Shuts down the MAC to the point where it is safe to unload the
+* driver.  Any subsystem that may be holding a data or function
+* ptr into the driver must be cleared/deinitialized.
+*
+* Arguments:
+*	hw		device structure
+* Returns:
+*	0		success
+*	>0		f/w reported error - f/w status code
+*	<0		driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+int
+hfa384x_drvr_stop(hfa384x_t *hw)
+{
+	int	result = 0;
+	int	i;
+	DBFENTER;
+
+	might_sleep();
+
+	/* There's no need for spinlocks here. The USB "disconnect"
+	 * function sets this "removed" flag and then calls us.
+	 */
+	if ( !hw->wlandev->hwremoved ) {
+		/* Call initialize to leave the MAC in its 'reset' state */
+		hfa384x_cmd_initialize(hw);
+
+		/* Cancel the rxurb */
+		usb_kill_urb(&hw->rx_urb);
+	}
+
+	hw->link_status = HFA384x_LINK_NOTCONNECTED;
+	hw->state = HFA384x_STATE_INIT;
+
+	del_timer_sync(&hw->commsqual_timer);
+
+	/* Clear all the port status */
+	for ( i = 0; i < HFA384x_NUMPORTS_MAX; i++) {
+		hw->port_enabled[i] = 0;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_drvr_txframe
+*
+* Takes a frame from prism2sta and queues it for transmission.
+*
+* Arguments:
+*	hw		device structure
+*	skb		packet buffer struct.  Contains an 802.11
+*			data frame.
+*       p80211_hdr      points to the 802.11 header for the packet.
+* Returns:
+*	0		Success and more buffs available
+*	1		Success but no more buffs
+*	2		Allocation failure
+*	4		Buffer full or queue busy
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep)
+
+{
+	int		usbpktlen = sizeof(hfa384x_tx_frame_t);
+	int		result;
+	int		ret;
+	char		*ptr;
+
+	DBFENTER;
+
+	if (hw->tx_urb.status == -EINPROGRESS) {
+		WLAN_LOG_WARNING("TX URB already in use\n");
+		result = 3;
+		goto exit;
+	}
+
+	/* Build Tx frame structure */
+	/* Set up the control field */
+	memset(&hw->txbuff.txfrm.desc, 0, sizeof(hw->txbuff.txfrm.desc));
+
+	/* Setup the usb type field */
+	hw->txbuff.type = host2hfa384x_16(HFA384x_USB_TXFRM);
+
+	/* Set up the sw_support field to identify this frame */
+	hw->txbuff.txfrm.desc.sw_support = 0x0123;
+
+/* Tx complete and Tx exception disable per dleach.  Might be causing
+ * buf depletion
+ */
+//#define DOEXC  SLP -- doboth breaks horribly under load, doexc less so.
+#if defined(DOBOTH)
+	hw->txbuff.txfrm.desc.tx_control =
+		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
+		HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(1);
+#elif defined(DOEXC)
+	hw->txbuff.txfrm.desc.tx_control =
+		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
+		HFA384x_TX_TXEX_SET(1) | HFA384x_TX_TXOK_SET(0);
+#else
+	hw->txbuff.txfrm.desc.tx_control =
+		HFA384x_TX_MACPORT_SET(0) | HFA384x_TX_STRUCTYPE_SET(1) |
+		HFA384x_TX_TXEX_SET(0) | HFA384x_TX_TXOK_SET(0);
+#endif
+	hw->txbuff.txfrm.desc.tx_control =
+		host2hfa384x_16(hw->txbuff.txfrm.desc.tx_control);
+
+	/* copy the header over to the txdesc */
+	memcpy(&(hw->txbuff.txfrm.desc.frame_control), p80211_hdr, sizeof(p80211_hdr_t));
+
+	/* if we're using host WEP, increase size by IV+ICV */
+	if (p80211_wep->data) {
+		hw->txbuff.txfrm.desc.data_len = host2hfa384x_16(skb->len+8);
+		// hw->txbuff.txfrm.desc.tx_control |= HFA384x_TX_NOENCRYPT_SET(1);
+		usbpktlen+=8;
+	} else {
+		hw->txbuff.txfrm.desc.data_len = host2hfa384x_16(skb->len);
+	}
+
+	usbpktlen += skb->len;
+
+	/* copy over the WEP IV if we are using host WEP */
+	ptr = hw->txbuff.txfrm.data;
+	if (p80211_wep->data) {
+		memcpy(ptr, p80211_wep->iv, sizeof(p80211_wep->iv));
+		ptr+= sizeof(p80211_wep->iv);
+		memcpy(ptr, p80211_wep->data, skb->len);
+	} else {
+		memcpy(ptr, skb->data, skb->len);
+	}
+	/* copy over the packet data */
+	ptr+= skb->len;
+
+	/* copy over the WEP ICV if we are using host WEP */
+	if (p80211_wep->data) {
+		memcpy(ptr, p80211_wep->icv, sizeof(p80211_wep->icv));
+	}
+
+	/* Send the USB packet */
+	usb_fill_bulk_urb( &(hw->tx_urb), hw->usb,
+	               hw->endp_out,
+	               &(hw->txbuff), ROUNDUP64(usbpktlen),
+	               hfa384x_usbout_callback, hw->wlandev );
+	hw->tx_urb.transfer_flags |= USB_QUEUE_BULK;
+
+	result = 1;
+	ret = submit_tx_urb(hw, &hw->tx_urb, GFP_ATOMIC);
+	if ( ret != 0 ) {
+		WLAN_LOG_ERROR(
+			"submit_tx_urb() failed, error=%d\n", ret);
+		result = 3;
+	}
+
+ exit:
+	DBFEXIT;
+	return result;
+}
+
+void hfa384x_tx_timeout(wlandevice_t *wlandev)
+{
+	hfa384x_t	*hw = wlandev->priv;
+	unsigned long flags;
+
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	if ( !hw->wlandev->hwremoved &&
+	     /* Note the bitwise OR, not the logical OR. */
+	     ( !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags) |
+	       !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags) ) )
+	{
+		schedule_work(&hw->usb_work);
+	}
+
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlx_reaper_task
+*
+* Tasklet to delete dead CTLX objects
+*
+* Arguments:
+*	data	ptr to a hfa384x_t
+*
+* Returns:
+*
+* Call context:
+*	Interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbctlx_reaper_task(unsigned long data)
+{
+	hfa384x_t	*hw = (hfa384x_t*)data;
+	struct list_head *entry;
+	struct list_head *temp;
+	unsigned long	flags;
+
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/* This list is guaranteed to be empty if someone
+	 * has unplugged the adapter.
+	 */
+	list_for_each_safe(entry, temp, &hw->ctlxq.reapable) {
+		hfa384x_usbctlx_t	*ctlx;
+
+		ctlx = list_entry(entry, hfa384x_usbctlx_t, list);
+		list_del(&ctlx->list);
+		kfree(ctlx);
+	}
+
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlx_completion_task
+*
+* Tasklet to call completion handlers for returned CTLXs
+*
+* Arguments:
+*	data	ptr to hfa384x_t
+*
+* Returns:
+*	Nothing
+*
+* Call context:
+*	Interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbctlx_completion_task(unsigned long data)
+{
+	hfa384x_t *hw = (hfa384x_t*)data;
+	struct list_head *entry;
+	struct list_head *temp;
+	unsigned long flags;
+
+	int reap = 0;
+
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/* This list is guaranteed to be empty if someone
+	 * has unplugged the adapter ...
+	 */
+	list_for_each_safe(entry, temp, &hw->ctlxq.completing) {
+		hfa384x_usbctlx_t *ctlx;
+
+		ctlx = list_entry(entry, hfa384x_usbctlx_t, list);
+
+		/* Call the completion function that this
+		 * command was assigned, assuming it has one.
+		 */
+		if ( ctlx->cmdcb != NULL ) {
+			spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+			ctlx->cmdcb(hw, ctlx);
+			spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+			/* Make sure we don't try and complete
+			 * this CTLX more than once!
+			 */
+			ctlx->cmdcb = NULL;
+
+			/* Did someone yank the adapter out
+			 * while our list was (briefly) unlocked?
+			 */
+			if ( hw->wlandev->hwremoved )
+			{
+				reap = 0;
+				break;
+			}
+		}
+
+		/*
+		 * "Reapable" CTLXs are ones which don't have any
+		 * threads waiting for them to die. Hence they must
+		 * be delivered to The Reaper!
+		 */
+		if ( ctlx->reapable ) {
+			/* Move the CTLX off the "completing" list (hopefully)
+			 * on to the "reapable" list where the reaper task
+			 * can find it. And "reapable" means that this CTLX
+			 * isn't sitting on a wait-queue somewhere.
+			 */
+			list_move_tail(&ctlx->list, &hw->ctlxq.reapable);
+			reap = 1;
+		}
+
+		complete(&ctlx->done);
+	}
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	if (reap)
+		tasklet_schedule(&hw->reaper_bh);
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* unlocked_usbctlx_cancel_async
+*
+* Mark the CTLX dead asynchronously, and ensure that the
+* next command on the queue is run afterwards.
+*
+* Arguments:
+*	hw	ptr to the hfa384x_t structure
+*	ctlx	ptr to a CTLX structure
+*
+* Returns:
+*	0	the CTLX's URB is inactive
+* -EINPROGRESS	the URB is currently being unlinked
+*
+* Call context:
+*	Either process or interrupt, but presumably interrupt
+----------------------------------------------------------------*/
+static int unlocked_usbctlx_cancel_async(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
+{
+	int ret;
+
+	DBFENTER;
+
+	/*
+	 * Try to delete the URB containing our request packet.
+	 * If we succeed, then its completion handler will be
+	 * called with a status of -ECONNRESET.
+	 */
+	hw->ctlx_urb.transfer_flags |= URB_ASYNC_UNLINK;
+	ret = usb_unlink_urb(&hw->ctlx_urb);
+
+	if (ret != -EINPROGRESS) {
+		/*
+		 * The OUT URB had either already completed
+		 * or was still in the pending queue, so the
+		 * URB's completion function will not be called.
+		 * We will have to complete the CTLX ourselves.
+		 */
+		ctlx->state = CTLX_REQ_FAILED;
+		unlocked_usbctlx_complete(hw, ctlx);
+		ret = 0;
+	}
+
+	DBFEXIT;
+
+	return ret;
+}
+
+/*----------------------------------------------------------------
+* unlocked_usbctlx_complete
+*
+* A CTLX has completed.  It may have been successful, it may not
+* have been. At this point, the CTLX should be quiescent.  The URBs
+* aren't active and the timers should have been stopped.
+*
+* The CTLX is migrated to the "completing" queue, and the completing
+* tasklet is scheduled.
+*
+* Arguments:
+*	hw		ptr to a hfa384x_t structure
+*	ctlx		ptr to a ctlx structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	Either, assume interrupt
+----------------------------------------------------------------*/
+static void unlocked_usbctlx_complete(hfa384x_t *hw, hfa384x_usbctlx_t *ctlx)
+{
+	DBFENTER;
+
+	/* Timers have been stopped, and ctlx should be in
+	 * a terminal state. Retire it from the "active"
+	 * queue.
+	 */
+	list_move_tail(&ctlx->list, &hw->ctlxq.completing);
+	tasklet_schedule(&hw->completion_bh);
+
+	switch (ctlx->state) {
+	case CTLX_COMPLETE:
+	case CTLX_REQ_FAILED:
+		/* This are the correct terminating states. */
+		break;
+
+	default:
+		WLAN_LOG_ERROR("CTLX[%d] not in a terminating state(%s)\n",
+		               hfa384x2host_16(ctlx->outbuf.type),
+		               ctlxstr(ctlx->state));
+		break;
+	} /* switch */
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlxq_run
+*
+* Checks to see if the head item is running.  If not, starts it.
+*
+* Arguments:
+*	hw	ptr to hfa384x_t
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	any
+----------------------------------------------------------------*/
+static void
+hfa384x_usbctlxq_run(hfa384x_t	*hw)
+{
+	unsigned long		flags;
+	DBFENTER;
+
+	/* acquire lock */
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/* Only one active CTLX at any one time, because there's no
+	 * other (reliable) way to match the response URB to the
+	 * correct CTLX.
+	 *
+	 * Don't touch any of these CTLXs if the hardware
+	 * has been removed or the USB subsystem is stalled.
+	 */
+	if ( !list_empty(&hw->ctlxq.active) ||
+	     test_bit(WORK_TX_HALT, &hw->usb_flags) ||
+	     hw->wlandev->hwremoved )
+		goto unlock;
+
+	while ( !list_empty(&hw->ctlxq.pending) ) {
+		hfa384x_usbctlx_t	*head;
+		int			result;
+
+		/* This is the first pending command */
+		head = list_entry(hw->ctlxq.pending.next,
+		                  hfa384x_usbctlx_t,
+		                  list);
+
+		/* We need to split this off to avoid a race condition */
+		list_move_tail(&head->list, &hw->ctlxq.active);
+
+		/* Fill the out packet */
+		usb_fill_bulk_urb( &(hw->ctlx_urb), hw->usb,
+		                   hw->endp_out,
+		                   &(head->outbuf), ROUNDUP64(head->outbufsize),
+		                   hfa384x_ctlxout_callback, hw);
+		hw->ctlx_urb.transfer_flags |= USB_QUEUE_BULK;
+
+		/* Now submit the URB and update the CTLX's state
+		 */
+		if ((result = SUBMIT_URB(&hw->ctlx_urb, GFP_ATOMIC)) == 0) {
+			/* This CTLX is now running on the active queue */
+			head->state = CTLX_REQ_SUBMITTED;
+
+			/* Start the OUT wait timer */
+			hw->req_timer_done = 0;
+			hw->reqtimer.expires = jiffies + HZ;
+			add_timer(&hw->reqtimer);
+
+			/* Start the IN wait timer */
+			hw->resp_timer_done = 0;
+			hw->resptimer.expires = jiffies + 2*HZ;
+			add_timer(&hw->resptimer);
+
+			break;
+		}
+
+		if (result == -EPIPE) {
+			/* The OUT pipe needs resetting, so put
+			 * this CTLX back in the "pending" queue
+			 * and schedule a reset ...
+			 */
+			WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
+			                 hw->wlandev->netdev->name);
+			list_move(&head->list, &hw->ctlxq.pending);
+			set_bit(WORK_TX_HALT, &hw->usb_flags);
+			schedule_work(&hw->usb_work);
+			break;
+		}
+
+		if (result == -ESHUTDOWN) {
+			WLAN_LOG_WARNING("%s urb shutdown!\n",
+					 hw->wlandev->netdev->name);
+			break;
+		}
+
+		WLAN_LOG_ERROR("Failed to submit CTLX[%d]: error=%d\n",
+		               hfa384x2host_16(head->outbuf.type), result);
+		unlocked_usbctlx_complete(hw, head);
+	} /* while */
+
+	unlock:
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbin_callback
+*
+* Callback for URBs on the BULKIN endpoint.
+*
+* Arguments:
+*	urb		ptr to the completed urb
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+#ifdef URB_ONLY_CALLBACK
+static void hfa384x_usbin_callback(struct urb *urb)
+#else
+static void hfa384x_usbin_callback(struct urb *urb, struct pt_regs *regs)
+#endif
+{
+	wlandevice_t		*wlandev = urb->context;
+	hfa384x_t		*hw;
+	hfa384x_usbin_t		*usbin = (hfa384x_usbin_t *) urb->transfer_buffer;
+	struct sk_buff          *skb = NULL;
+	int			result;
+	int                     urb_status;
+	UINT16			type;
+
+	enum USBIN_ACTION {
+		HANDLE,
+		RESUBMIT,
+		ABORT
+	} action;
+
+	DBFENTER;
+
+	if ( !wlandev ||
+	     !wlandev->netdev ||
+	     !netif_device_present(wlandev->netdev) )
+		goto exit;
+
+	hw = wlandev->priv;
+	if (!hw)
+		goto exit;
+
+	skb = hw->rx_urb_skb;
+	if (!skb || (skb->data != urb->transfer_buffer)) {
+		BUG();
+	}
+	hw->rx_urb_skb = NULL;
+
+	/* Check for error conditions within the URB */
+	switch (urb->status) {
+	case 0:
+		action = HANDLE;
+
+		/* Check for short packet */
+		if ( urb->actual_length == 0 ) {
+			++(wlandev->linux_stats.rx_errors);
+			++(wlandev->linux_stats.rx_length_errors);
+			action = RESUBMIT;
+		}
+		break;
+
+	case -EPIPE:
+		WLAN_LOG_WARNING("%s rx pipe stalled: requesting reset\n",
+		                 wlandev->netdev->name);
+		if ( !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags) )
+			schedule_work(&hw->usb_work);
+		++(wlandev->linux_stats.rx_errors);
+		action = ABORT;
+		break;
+
+	case -EILSEQ:
+	case -ETIMEDOUT:
+	case -EPROTO:
+		if ( !test_and_set_bit(THROTTLE_RX, &hw->usb_flags) &&
+		     !timer_pending(&hw->throttle) ) {
+			mod_timer(&hw->throttle, jiffies + THROTTLE_JIFFIES);
+		}
+		++(wlandev->linux_stats.rx_errors);
+		action = ABORT;
+		break;
+
+	case -EOVERFLOW:
+		++(wlandev->linux_stats.rx_over_errors);
+		action = RESUBMIT;
+		break;
+
+	case -ENODEV:
+	case -ESHUTDOWN:
+		WLAN_LOG_DEBUG(3,"status=%d, device removed.\n", urb->status);
+		action = ABORT;
+		break;
+
+	case -ENOENT:
+	case -ECONNRESET:
+		WLAN_LOG_DEBUG(3,"status=%d, urb explicitly unlinked.\n", urb->status);
+		action = ABORT;
+		break;
+
+	default:
+		WLAN_LOG_DEBUG(3,"urb status=%d, transfer flags=0x%x\n",
+		                 urb->status, urb->transfer_flags);
+		++(wlandev->linux_stats.rx_errors);
+		action = RESUBMIT;
+		break;
+	}
+
+	urb_status = urb->status;
+
+	if (action != ABORT) {
+		/* Repost the RX URB */
+		result = submit_rx_urb(hw, GFP_ATOMIC);
+
+		if (result != 0) {
+			WLAN_LOG_ERROR(
+				"Fatal, failed to resubmit rx_urb. error=%d\n",
+				result);
+		}
+	}
+
+	/* Handle any USB-IN packet */
+	/* Note: the check of the sw_support field, the type field doesn't
+	 *       have bit 12 set like the docs suggest.
+	 */
+	type = hfa384x2host_16(usbin->type);
+	if (HFA384x_USB_ISRXFRM(type)) {
+		if (action == HANDLE) {
+			if (usbin->txfrm.desc.sw_support == 0x0123) {
+				hfa384x_usbin_txcompl(wlandev, usbin);
+			} else {
+				skb_put(skb, sizeof(*usbin));
+				hfa384x_usbin_rx(wlandev, skb);
+				skb = NULL;
+			}
+		}
+		goto exit;
+	}
+	if (HFA384x_USB_ISTXFRM(type)) {
+		if (action == HANDLE)
+			hfa384x_usbin_txcompl(wlandev, usbin);
+		goto exit;
+	}
+	switch (type) {
+	case HFA384x_USB_INFOFRM:
+		if (action == ABORT)
+			goto exit;
+		if (action == HANDLE)
+			hfa384x_usbin_info(wlandev, usbin);
+		break;
+
+	case HFA384x_USB_CMDRESP:
+	case HFA384x_USB_WRIDRESP:
+	case HFA384x_USB_RRIDRESP:
+	case HFA384x_USB_WMEMRESP:
+	case HFA384x_USB_RMEMRESP:
+		/* ALWAYS, ALWAYS, ALWAYS handle this CTLX!!!! */
+		hfa384x_usbin_ctlx(hw, usbin, urb_status);
+		break;
+
+	case HFA384x_USB_BUFAVAIL:
+		WLAN_LOG_DEBUG(3,"Received BUFAVAIL packet, frmlen=%d\n",
+			usbin->bufavail.frmlen);
+		break;
+
+	case HFA384x_USB_ERROR:
+		WLAN_LOG_DEBUG(3,"Received USB_ERROR packet, errortype=%d\n",
+			usbin->usberror.errortype);
+		break;
+
+	default:
+		WLAN_LOG_DEBUG(3,"Unrecognized USBIN packet, type=%x, status=%d\n",
+			usbin->type, urb_status);
+		break;
+	} /* switch */
+
+exit:
+
+	if (skb)
+		dev_kfree_skb(skb);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbin_ctlx
+*
+* We've received a URB containing a Prism2 "response" message.
+* This message needs to be matched up with a CTLX on the active
+* queue and our state updated accordingly.
+*
+* Arguments:
+*	hw		ptr to hfa384x_t
+*	usbin		ptr to USB IN packet
+*	urb_status	status of this Bulk-In URB
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbin_ctlx(hfa384x_t *hw, hfa384x_usbin_t *usbin,
+			       int urb_status)
+{
+	hfa384x_usbctlx_t	*ctlx;
+	int			run_queue = 0;
+	unsigned long		flags;
+
+	DBFENTER;
+
+retry:
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/* There can be only one CTLX on the active queue
+	 * at any one time, and this is the CTLX that the
+	 * timers are waiting for.
+	 */
+	if ( list_empty(&hw->ctlxq.active) ) {
+		goto unlock;
+	}
+
+	/* Remove the "response timeout". It's possible that
+	 * we are already too late, and that the timeout is
+	 * already running. And that's just too bad for us,
+	 * because we could lose our CTLX from the active
+	 * queue here ...
+	 */
+	if (del_timer(&hw->resptimer) == 0) {
+		if (hw->resp_timer_done == 0) {
+			spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+			goto retry;
+		}
+	}
+	else {
+		hw->resp_timer_done = 1;
+	}
+
+	ctlx = get_active_ctlx(hw);
+
+	if (urb_status != 0) {
+		/*
+		 * Bad CTLX, so get rid of it. But we only
+		 * remove it from the active queue if we're no
+		 * longer expecting the OUT URB to complete.
+		 */
+		if (unlocked_usbctlx_cancel_async(hw, ctlx) == 0)
+			run_queue = 1;
+	} else {
+		const UINT16 intype = (usbin->type&~host2hfa384x_16(0x8000));
+
+		/*
+		 * Check that our message is what we're expecting ...
+		 */
+		if (ctlx->outbuf.type != intype) {
+			WLAN_LOG_WARNING("Expected IN[%d], received IN[%d] - ignored.\n",
+			                 hfa384x2host_16(ctlx->outbuf.type),
+			                 hfa384x2host_16(intype));
+			goto unlock;
+		}
+
+		/* This URB has succeeded, so grab the data ... */
+		memcpy(&ctlx->inbuf, usbin, sizeof(ctlx->inbuf));
+
+		switch (ctlx->state) {
+		case CTLX_REQ_SUBMITTED:
+			/*
+			 * We have received our response URB before
+			 * our request has been acknowledged. Odd,
+			 * but our OUT URB is still alive...
+			 */
+			WLAN_LOG_DEBUG(0, "Causality violation: please reboot Universe, or email linux-wlan-devel@lists.linux-wlan.com\n");
+			ctlx->state = CTLX_RESP_COMPLETE;
+			break;
+
+		case CTLX_REQ_COMPLETE:
+			/*
+			 * This is the usual path: our request
+			 * has already been acknowledged, and
+			 * now we have received the reply too.
+			 */
+			ctlx->state = CTLX_COMPLETE;
+			unlocked_usbctlx_complete(hw, ctlx);
+			run_queue = 1;
+			break;
+
+		default:
+			/*
+			 * Throw this CTLX away ...
+			 */
+			WLAN_LOG_ERROR("Matched IN URB, CTLX[%d] in invalid state(%s)."
+			               " Discarded.\n",
+			               hfa384x2host_16(ctlx->outbuf.type),
+			               ctlxstr(ctlx->state));
+			if (unlocked_usbctlx_cancel_async(hw, ctlx) == 0)
+				run_queue = 1;
+			break;
+		} /* switch */
+	}
+
+unlock:
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	if (run_queue)
+		hfa384x_usbctlxq_run(hw);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbin_txcompl
+*
+* At this point we have the results of a previous transmit.
+*
+* Arguments:
+*	wlandev		wlan device
+*	usbin		ptr to the usb transfer buffer
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbin_txcompl(wlandevice_t *wlandev, hfa384x_usbin_t *usbin)
+{
+	UINT16			status;
+	DBFENTER;
+
+	status = hfa384x2host_16(usbin->type); /* yeah I know it says type...*/
+
+	/* Was there an error? */
+	if (HFA384x_TXSTATUS_ISERROR(status)) {
+		prism2sta_ev_txexc(wlandev, status);
+	} else {
+		prism2sta_ev_tx(wlandev, status);
+	}
+	// prism2sta_ev_alloc(wlandev);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbin_rx
+*
+* At this point we have a successful received a rx frame packet.
+*
+* Arguments:
+*	wlandev		wlan device
+*	usbin		ptr to the usb transfer buffer
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb)
+{
+	hfa384x_usbin_t         *usbin = (hfa384x_usbin_t *) skb->data;
+	hfa384x_t               *hw = wlandev->priv;
+	int                     hdrlen;
+	p80211_rxmeta_t         *rxmeta;
+	UINT16                  data_len;
+	UINT16                  fc;
+
+	DBFENTER;
+
+	/* Byte order convert once up front. */
+	usbin->rxfrm.desc.status =
+		hfa384x2host_16(usbin->rxfrm.desc.status);
+	usbin->rxfrm.desc.time =
+		hfa384x2host_32(usbin->rxfrm.desc.time);
+
+	/* Now handle frame based on port# */
+	switch( HFA384x_RXSTATUS_MACPORT_GET(usbin->rxfrm.desc.status) )
+	{
+	case 0:
+		fc = ieee2host16(usbin->rxfrm.desc.frame_control);
+
+		/* If exclude and we receive an unencrypted, drop it */
+		if ( (wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED) &&
+		     !WLAN_GET_FC_ISWEP(fc)){
+			goto done;
+		}
+
+		data_len = hfa384x2host_16(usbin->rxfrm.desc.data_len);
+
+		/* How much header data do we have? */
+		hdrlen = p80211_headerlen(fc);
+
+		/* Pull off the descriptor */
+		skb_pull(skb, sizeof(hfa384x_rx_frame_t));
+
+		/* Now shunt the header block up against the data block
+		 * with an "overlapping" copy
+		 */
+		memmove(skb_push(skb, hdrlen),
+		        &usbin->rxfrm.desc.frame_control,
+		        hdrlen);
+
+		skb->dev = wlandev->netdev;
+		skb->dev->last_rx = jiffies;
+
+		/* And set the frame length properly */
+		skb_trim(skb, data_len + hdrlen);
+
+		/* The prism2 series does not return the CRC */
+		memset(skb_put(skb, WLAN_CRC_LEN), 0xff, WLAN_CRC_LEN);
+
+		skb_reset_mac_header(skb);
+
+		/* Attach the rxmeta, set some stuff */
+		p80211skb_rxmeta_attach(wlandev, skb);
+		rxmeta = P80211SKB_RXMETA(skb);
+		rxmeta->mactime = usbin->rxfrm.desc.time;
+		rxmeta->rxrate = usbin->rxfrm.desc.rate;
+		rxmeta->signal = usbin->rxfrm.desc.signal - hw->dbmadjust;
+		rxmeta->noise = usbin->rxfrm.desc.silence - hw->dbmadjust;
+
+		prism2sta_ev_rx(wlandev, skb);
+
+		break;
+
+	case 7:
+		if ( ! HFA384x_RXSTATUS_ISFCSERR(usbin->rxfrm.desc.status) ) {
+			/* Copy to wlansnif skb */
+			hfa384x_int_rxmonitor( wlandev, &usbin->rxfrm);
+			dev_kfree_skb(skb);
+		} else {
+			WLAN_LOG_DEBUG(3,"Received monitor frame: FCSerr set\n");
+		}
+		break;
+
+	default:
+		WLAN_LOG_WARNING("Received frame on unsupported port=%d\n",
+			HFA384x_RXSTATUS_MACPORT_GET(usbin->rxfrm.desc.status) );
+		goto done;
+		break;
+	}
+
+done:
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_int_rxmonitor
+*
+* Helper function for int_rx.  Handles monitor frames.
+* Note that this function allocates space for the FCS and sets it
+* to 0xffffffff.  The hfa384x doesn't give us the FCS value but the
+* higher layers expect it.  0xffffffff is used as a flag to indicate
+* the FCS is bogus.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	rxfrm		rx descriptor read from card in int_rx
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	Allocates an skb and passes it up via the PF_PACKET interface.
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_int_rxmonitor( wlandevice_t *wlandev, hfa384x_usb_rxfrm_t *rxfrm)
+{
+	hfa384x_rx_frame_t              *rxdesc = &(rxfrm->desc);
+	UINT				hdrlen = 0;
+	UINT				datalen = 0;
+	UINT				skblen = 0;
+	p80211msg_lnxind_wlansniffrm_t	*msg;
+	UINT8				*datap;
+	UINT16				fc;
+	struct sk_buff			*skb;
+	hfa384x_t		        *hw = wlandev->priv;
+
+
+	DBFENTER;
+	/* Don't forget the status, time, and data_len fields are in host order */
+	/* Figure out how big the frame is */
+	fc = ieee2host16(rxdesc->frame_control);
+	hdrlen = p80211_headerlen(fc);
+	datalen = hfa384x2host_16(rxdesc->data_len);
+
+	/* Allocate an ind message+framesize skb */
+	skblen = sizeof(p80211msg_lnxind_wlansniffrm_t) +
+		hdrlen + datalen + WLAN_CRC_LEN;
+
+	/* sanity check the length */
+	if ( skblen >
+		(sizeof(p80211msg_lnxind_wlansniffrm_t) +
+		WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN) ) {
+		WLAN_LOG_DEBUG(1, "overlen frm: len=%zd\n",
+			skblen - sizeof(p80211msg_lnxind_wlansniffrm_t));
+	}
+
+	if ( (skb = dev_alloc_skb(skblen)) == NULL ) {
+		WLAN_LOG_ERROR("alloc_skb failed trying to allocate %d bytes\n", skblen);
+		return;
+	}
+
+	/* only prepend the prism header if in the right mode */
+	if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
+	    (hw->sniffhdr == 0)) {
+		datap = skb_put(skb, sizeof(p80211msg_lnxind_wlansniffrm_t));
+		msg = (p80211msg_lnxind_wlansniffrm_t*) datap;
+
+		/* Initialize the message members */
+		msg->msgcode = DIDmsg_lnxind_wlansniffrm;
+		msg->msglen = sizeof(p80211msg_lnxind_wlansniffrm_t);
+		strcpy(msg->devname, wlandev->name);
+
+		msg->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
+		msg->hosttime.status = 0;
+		msg->hosttime.len = 4;
+		msg->hosttime.data = jiffies;
+
+		msg->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
+		msg->mactime.status = 0;
+		msg->mactime.len = 4;
+		msg->mactime.data = rxdesc->time;
+
+		msg->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
+		msg->channel.status = 0;
+		msg->channel.len = 4;
+		msg->channel.data = hw->sniff_channel;
+
+		msg->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
+		msg->rssi.status = P80211ENUM_msgitem_status_no_value;
+		msg->rssi.len = 4;
+		msg->rssi.data = 0;
+
+		msg->sq.did = DIDmsg_lnxind_wlansniffrm_sq;
+		msg->sq.status = P80211ENUM_msgitem_status_no_value;
+		msg->sq.len = 4;
+		msg->sq.data = 0;
+
+		msg->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
+		msg->signal.status = 0;
+		msg->signal.len = 4;
+		msg->signal.data = rxdesc->signal;
+
+		msg->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
+		msg->noise.status = 0;
+		msg->noise.len = 4;
+		msg->noise.data = rxdesc->silence;
+
+		msg->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
+		msg->rate.status = 0;
+		msg->rate.len = 4;
+		msg->rate.data = rxdesc->rate / 5; /* set to 802.11 units */
+
+		msg->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
+		msg->istx.status = 0;
+		msg->istx.len = 4;
+		msg->istx.data = P80211ENUM_truth_false;
+
+		msg->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
+		msg->frmlen.status = 0;
+		msg->frmlen.len = 4;
+		msg->frmlen.data = hdrlen + datalen + WLAN_CRC_LEN;
+	} else if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
+		   (hw->sniffhdr != 0)) {
+		p80211_caphdr_t		*caphdr;
+		/* The NEW header format! */
+		datap = skb_put(skb, sizeof(p80211_caphdr_t));
+		caphdr = (p80211_caphdr_t*) datap;
+
+		caphdr->version =	htonl(P80211CAPTURE_VERSION);
+		caphdr->length =	htonl(sizeof(p80211_caphdr_t));
+		caphdr->mactime =	__cpu_to_be64(rxdesc->time) * 1000;
+		caphdr->hosttime =	__cpu_to_be64(jiffies);
+		caphdr->phytype =	htonl(4); /* dss_dot11_b */
+		caphdr->channel =	htonl(hw->sniff_channel);
+		caphdr->datarate =	htonl(rxdesc->rate);
+		caphdr->antenna =	htonl(0); /* unknown */
+		caphdr->priority =	htonl(0); /* unknown */
+		caphdr->ssi_type =	htonl(3); /* rssi_raw */
+		caphdr->ssi_signal =	htonl(rxdesc->signal);
+		caphdr->ssi_noise =	htonl(rxdesc->silence);
+		caphdr->preamble =	htonl(0); /* unknown */
+		caphdr->encoding =	htonl(1); /* cck */
+	}
+
+	/* Copy the 802.11 header to the skb (ctl frames may be less than a full header) */
+	datap = skb_put(skb, hdrlen);
+	memcpy( datap, &(rxdesc->frame_control), hdrlen);
+
+	/* If any, copy the data from the card to the skb */
+	if ( datalen > 0 )
+	{
+		datap = skb_put(skb, datalen);
+		memcpy(datap, rxfrm->data, datalen);
+
+		/* check for unencrypted stuff if WEP bit set. */
+		if (*(datap - hdrlen + 1) & 0x40) // wep set
+		  if ((*(datap) == 0xaa) && (*(datap+1) == 0xaa))
+		    *(datap - hdrlen + 1) &= 0xbf; // clear wep; it's the 802.2 header!
+	}
+
+	if (hw->sniff_fcs) {
+		/* Set the FCS */
+		datap = skb_put(skb, WLAN_CRC_LEN);
+		memset( datap, 0xff, WLAN_CRC_LEN);
+	}
+
+	/* pass it back up */
+	prism2sta_ev_rx(wlandev, skb);
+
+	DBFEXIT;
+	return;
+}
+
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbin_info
+*
+* At this point we have a successful received a Prism2 info frame.
+*
+* Arguments:
+*	wlandev		wlan device
+*	usbin		ptr to the usb transfer buffer
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbin_info(wlandevice_t *wlandev, hfa384x_usbin_t *usbin)
+{
+	DBFENTER;
+
+	usbin->infofrm.info.framelen = hfa384x2host_16(usbin->infofrm.info.framelen);
+	prism2sta_ev_info(wlandev, &usbin->infofrm.info);
+
+	DBFEXIT;
+}
+
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbout_callback
+*
+* Callback for URBs on the BULKOUT endpoint.
+*
+* Arguments:
+*	urb		ptr to the completed urb
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+#ifdef URB_ONLY_CALLBACK
+static void hfa384x_usbout_callback(struct urb *urb)
+#else
+static void hfa384x_usbout_callback(struct urb *urb, struct pt_regs *regs)
+#endif
+{
+	wlandevice_t		*wlandev = urb->context;
+	hfa384x_usbout_t	*usbout = urb->transfer_buffer;
+	DBFENTER;
+
+#ifdef DEBUG_USB
+	dbprint_urb(urb);
+#endif
+
+	if ( wlandev &&
+	     wlandev->netdev ) {
+
+		switch(urb->status) {
+		case 0:
+			hfa384x_usbout_tx(wlandev, usbout);
+			break;
+
+		case -EPIPE:
+		{
+			hfa384x_t *hw = wlandev->priv;
+			WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
+			                 wlandev->netdev->name);
+			if ( !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags) )
+				schedule_work(&hw->usb_work);
+			++(wlandev->linux_stats.tx_errors);
+			break;
+		}
+
+		case -EPROTO:
+		case -ETIMEDOUT:
+		case -EILSEQ:
+		{
+			hfa384x_t *hw = wlandev->priv;
+
+			if ( !test_and_set_bit(THROTTLE_TX, &hw->usb_flags)
+			     && !timer_pending(&hw->throttle) ) {
+				mod_timer(&hw->throttle,
+				          jiffies + THROTTLE_JIFFIES);
+			}
+			++(wlandev->linux_stats.tx_errors);
+			netif_stop_queue(wlandev->netdev);
+			break;
+		}
+
+		case -ENOENT:
+		case -ESHUTDOWN:
+			/* Ignorable errors */
+			break;
+
+		default:
+			WLAN_LOG_INFO("unknown urb->status=%d\n", urb->status);
+			++(wlandev->linux_stats.tx_errors);
+			break;
+		} /* switch */
+	}
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_ctlxout_callback
+*
+* Callback for control data on the BULKOUT endpoint.
+*
+* Arguments:
+*	urb		ptr to the completed urb
+*
+* Returns:
+* nothing
+*
+* Side effects:
+*
+* Call context:
+* interrupt
+----------------------------------------------------------------*/
+#ifdef URB_ONLY_CALLBACK
+static void hfa384x_ctlxout_callback(struct urb *urb)
+#else
+static void hfa384x_ctlxout_callback(struct urb *urb, struct pt_regs *regs)
+#endif
+{
+	hfa384x_t	*hw = urb->context;
+	int             delete_resptimer = 0;
+	int             timer_ok = 1;
+	int		run_queue = 0;
+	hfa384x_usbctlx_t	*ctlx;
+	unsigned long	flags;
+
+	DBFENTER;
+
+	WLAN_LOG_DEBUG(3,"urb->status=%d\n", urb->status);
+#ifdef DEBUG_USB
+	dbprint_urb(urb);
+#endif
+	if ( (urb->status == -ESHUTDOWN) ||
+	     (urb->status == -ENODEV) ||
+	     (hw == NULL) )
+		goto done;
+
+retry:
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/*
+	 * Only one CTLX at a time on the "active" list, and
+	 * none at all if we are unplugged. However, we can
+	 * rely on the disconnect function to clean everything
+	 * up if someone unplugged the adapter.
+	 */
+	if ( list_empty(&hw->ctlxq.active) ) {
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+		goto done;
+	}
+
+	/*
+	 * Having something on the "active" queue means
+	 * that we have timers to worry about ...
+	 */
+	if (del_timer(&hw->reqtimer) == 0) {
+		if (hw->req_timer_done == 0) {
+			/*
+			 * This timer was actually running while we
+			 * were trying to delete it. Let it terminate
+			 * gracefully instead.
+			 */
+			spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+			goto retry;
+		}
+	}
+	else {
+		hw->req_timer_done = 1;
+	}
+
+	ctlx = get_active_ctlx(hw);
+
+	if ( urb->status == 0 ) {
+		/* Request portion of a CTLX is successful */
+		switch ( ctlx->state ) {
+		case CTLX_REQ_SUBMITTED:
+			/* This OUT-ACK received before IN */
+			ctlx->state = CTLX_REQ_COMPLETE;
+			break;
+
+		case CTLX_RESP_COMPLETE:
+			/* IN already received before this OUT-ACK,
+			 * so this command must now be complete.
+			 */
+			ctlx->state = CTLX_COMPLETE;
+			unlocked_usbctlx_complete(hw, ctlx);
+			run_queue = 1;
+			break;
+
+		default:
+			/* This is NOT a valid CTLX "success" state! */
+			WLAN_LOG_ERROR(
+			    "Illegal CTLX[%d] success state(%s, %d) in OUT URB\n",
+			    hfa384x2host_16(ctlx->outbuf.type),
+			    ctlxstr(ctlx->state), urb->status);
+			break;
+		} /* switch */
+	} else {
+		/* If the pipe has stalled then we need to reset it */
+		if ( (urb->status == -EPIPE) &&
+		      !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags) ) {
+			WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
+			                 hw->wlandev->netdev->name);
+			schedule_work(&hw->usb_work);
+		}
+
+		/* If someone cancels the OUT URB then its status
+		 * should be either -ECONNRESET or -ENOENT.
+		 */
+		ctlx->state = CTLX_REQ_FAILED;
+		unlocked_usbctlx_complete(hw, ctlx);
+		delete_resptimer = 1;
+		run_queue = 1;
+	}
+
+ delresp:
+	if (delete_resptimer) {
+		if ((timer_ok = del_timer(&hw->resptimer)) != 0) {
+			hw->resp_timer_done = 1;
+		}
+	}
+
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	if ( !timer_ok && (hw->resp_timer_done == 0) ) {
+		spin_lock_irqsave(&hw->ctlxq.lock, flags);
+		goto delresp;
+	}
+
+	if (run_queue)
+		hfa384x_usbctlxq_run(hw);
+
+ done:
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlx_reqtimerfn
+*
+* Timer response function for CTLX request timeouts.  If this
+* function is called, it means that the callback for the OUT
+* URB containing a Prism2.x XXX_Request was never called.
+*
+* Arguments:
+*	data		a ptr to the hfa384x_t
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void
+hfa384x_usbctlx_reqtimerfn(unsigned long data)
+{
+	hfa384x_t	*hw = (hfa384x_t*)data;
+	unsigned long   flags;
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	hw->req_timer_done = 1;
+
+	/* Removing the hardware automatically empties
+	 * the active list ...
+	 */
+	if ( !list_empty(&hw->ctlxq.active) )
+	{
+		/*
+		 * We must ensure that our URB is removed from
+		 * the system, if it hasn't already expired.
+		 */
+		hw->ctlx_urb.transfer_flags |= URB_ASYNC_UNLINK;
+		if (usb_unlink_urb(&hw->ctlx_urb) == -EINPROGRESS)
+		{
+			hfa384x_usbctlx_t *ctlx = get_active_ctlx(hw);
+
+			ctlx->state = CTLX_REQ_FAILED;
+
+			/* This URB was active, but has now been
+			 * cancelled. It will now have a status of
+			 * -ECONNRESET in the callback function.
+			 *
+			 * We are cancelling this CTLX, so we're
+			 * not going to need to wait for a response.
+			 * The URB's callback function will check
+			 * that this timer is truly dead.
+			 */
+			if (del_timer(&hw->resptimer) != 0)
+				hw->resp_timer_done = 1;
+		}
+	}
+
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlx_resptimerfn
+*
+* Timer response function for CTLX response timeouts.  If this
+* function is called, it means that the callback for the IN
+* URB containing a Prism2.x XXX_Response was never called.
+*
+* Arguments:
+*	data		a ptr to the hfa384x_t
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void
+hfa384x_usbctlx_resptimerfn(unsigned long data)
+{
+	hfa384x_t *hw = (hfa384x_t*)data;
+	unsigned long   flags;
+
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	hw->resp_timer_done = 1;
+
+	/* The active list will be empty if the
+	 * adapter has been unplugged ...
+	 */
+	if ( !list_empty(&hw->ctlxq.active) )
+	{
+		hfa384x_usbctlx_t *ctlx = get_active_ctlx(hw);
+
+		if ( unlocked_usbctlx_cancel_async(hw, ctlx) == 0 )
+		{
+			spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+			hfa384x_usbctlxq_run(hw);
+			goto done;
+		}
+	}
+
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+ done:
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_usb_throttlefn
+*
+*
+* Arguments:
+*	data	ptr to hw
+*
+* Returns:
+*	Nothing
+*
+* Side effects:
+*
+* Call context:
+*	Interrupt
+----------------------------------------------------------------*/
+static void
+hfa384x_usb_throttlefn(unsigned long data)
+{
+	hfa384x_t *hw = (hfa384x_t*)data;
+	unsigned long   flags;
+
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	/*
+	 * We need to check BOTH the RX and the TX throttle controls,
+	 * so we use the bitwise OR instead of the logical OR.
+	 */
+	WLAN_LOG_DEBUG(3, "flags=0x%lx\n", hw->usb_flags);
+	if ( !hw->wlandev->hwremoved &&
+	     (
+	       (test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) &&
+	       !test_and_set_bit(WORK_RX_RESUME, &hw->usb_flags))
+	       |
+	       (test_and_clear_bit(THROTTLE_TX, &hw->usb_flags) &&
+	        !test_and_set_bit(WORK_TX_RESUME, &hw->usb_flags))
+	     ) )
+	{
+		schedule_work(&hw->usb_work);
+	}
+
+	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbctlx_submit
+*
+* Called from the doxxx functions to submit a CTLX to the queue
+*
+* Arguments:
+*	hw		ptr to the hw struct
+*	ctlx		ctlx structure to enqueue
+*
+* Returns:
+*	-ENODEV if the adapter is unplugged
+*	0
+*
+* Side effects:
+*
+* Call context:
+*	process or interrupt
+----------------------------------------------------------------*/
+static int
+hfa384x_usbctlx_submit(
+	hfa384x_t		*hw,
+	hfa384x_usbctlx_t	*ctlx)
+{
+	unsigned long flags;
+	int ret;
+
+	DBFENTER;
+
+	spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+	if (hw->wlandev->hwremoved) {
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+		ret = -ENODEV;
+	} else {
+		ctlx->state = CTLX_PENDING;
+		list_add_tail(&ctlx->list, &hw->ctlxq.pending);
+
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+		hfa384x_usbctlxq_run(hw);
+		ret = 0;
+	}
+
+	DBFEXIT;
+	return ret;
+}
+
+
+/*----------------------------------------------------------------
+* hfa384x_usbout_tx
+*
+* At this point we have finished a send of a frame.  Mark the URB
+* as available and call ev_alloc to notify higher layers we're
+* ready for more.
+*
+* Arguments:
+*	wlandev		wlan device
+*	usbout		ptr to the usb transfer buffer
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void hfa384x_usbout_tx(wlandevice_t *wlandev, hfa384x_usbout_t *usbout)
+{
+	DBFENTER;
+
+	prism2sta_ev_alloc(wlandev);
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* hfa384x_isgood_pdrcore
+*
+* Quick check of PDR codes.
+*
+* Arguments:
+*	pdrcode		PDR code number (host order)
+*
+* Returns:
+*	zero		not good.
+*	one		is good.
+*
+* Side effects:
+*
+* Call context:
+----------------------------------------------------------------*/
+static int
+hfa384x_isgood_pdrcode(UINT16 pdrcode)
+{
+	switch(pdrcode) {
+	case HFA384x_PDR_END_OF_PDA:
+	case HFA384x_PDR_PCB_PARTNUM:
+	case HFA384x_PDR_PDAVER:
+	case HFA384x_PDR_NIC_SERIAL:
+	case HFA384x_PDR_MKK_MEASUREMENTS:
+	case HFA384x_PDR_NIC_RAMSIZE:
+	case HFA384x_PDR_MFISUPRANGE:
+	case HFA384x_PDR_CFISUPRANGE:
+	case HFA384x_PDR_NICID:
+	case HFA384x_PDR_MAC_ADDRESS:
+	case HFA384x_PDR_REGDOMAIN:
+	case HFA384x_PDR_ALLOWED_CHANNEL:
+	case HFA384x_PDR_DEFAULT_CHANNEL:
+	case HFA384x_PDR_TEMPTYPE:
+	case HFA384x_PDR_IFR_SETTING:
+	case HFA384x_PDR_RFR_SETTING:
+	case HFA384x_PDR_HFA3861_BASELINE:
+	case HFA384x_PDR_HFA3861_SHADOW:
+	case HFA384x_PDR_HFA3861_IFRF:
+	case HFA384x_PDR_HFA3861_CHCALSP:
+	case HFA384x_PDR_HFA3861_CHCALI:
+	case HFA384x_PDR_3842_NIC_CONFIG:
+	case HFA384x_PDR_USB_ID:
+	case HFA384x_PDR_PCI_ID:
+	case HFA384x_PDR_PCI_IFCONF:
+	case HFA384x_PDR_PCI_PMCONF:
+	case HFA384x_PDR_RFENRGY:
+	case HFA384x_PDR_HFA3861_MANF_TESTSP:
+	case HFA384x_PDR_HFA3861_MANF_TESTI:
+		/* code is OK */
+		return 1;
+		break;
+	default:
+		if ( pdrcode < 0x1000 ) {
+			/* code is OK, but we don't know exactly what it is */
+			WLAN_LOG_DEBUG(3,
+				"Encountered unknown PDR#=0x%04x, "
+				"assuming it's ok.\n",
+				pdrcode);
+			return 1;
+		} else {
+			/* bad code */
+			WLAN_LOG_DEBUG(3,
+				"Encountered unknown PDR#=0x%04x, "
+				"(>=0x1000), assuming it's bad.\n",
+				pdrcode);
+			return 0;
+		}
+		break;
+	}
+	return 0; /* avoid compiler warnings */
+}
+
diff --git a/drivers/staging/wlan-ng/p80211conv.c b/drivers/staging/wlan-ng/p80211conv.c
new file mode 100644
index 0000000..68121b9
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211conv.c
@@ -0,0 +1,683 @@
+/* src/p80211/p80211conv.c
+*
+* Ether/802.11 conversions and packet buffer routines
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file defines the functions that perform Ethernet to/from
+* 802.11 frame conversions.
+*
+* --------------------------------------------------------------------
+*/
+/*================================================================*/
+/* System Includes */
+
+#define __NO_VERSION__		/* prevent the static definition */
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+
+#include <asm/byteorder.h>
+
+#include "version.h"
+#include "wlan_compat.h"
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211conv.h"
+#include "p80211mgmt.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211ioctl.h"
+#include "p80211req.h"
+
+
+/*================================================================*/
+/* Local Constants */
+
+/*================================================================*/
+/* Local Macros */
+
+
+/*================================================================*/
+/* Local Types */
+
+
+/*================================================================*/
+/* Local Static Definitions */
+
+static UINT8	oui_rfc1042[] = {0x00, 0x00, 0x00};
+static UINT8	oui_8021h[] = {0x00, 0x00, 0xf8};
+
+/*================================================================*/
+/* Local Function Declarations */
+
+
+/*================================================================*/
+/* Function Definitions */
+
+/*----------------------------------------------------------------
+* p80211pb_ether_to_80211
+*
+* Uses the contents of the ether frame and the etherconv setting
+* to build the elements of the 802.11 frame.
+*
+* We don't actually set
+* up the frame header here.  That's the MAC's job.  We're only handling
+* conversion of DIXII or 802.3+LLC frames to something that works
+* with 802.11.
+*
+* Note -- 802.11 header is NOT part of the skb.  Likewise, the 802.11
+*         FCS is also not present and will need to be added elsewhere.
+*
+* Arguments:
+*	ethconv		Conversion type to perform
+*	skb		skbuff containing the ether frame
+*       p80211_hdr      802.11 header
+*
+* Returns:
+*	0 on success, non-zero otherwise
+*
+* Call context:
+*	May be called in interrupt or non-interrupt context
+----------------------------------------------------------------*/
+int skb_ether_to_p80211( wlandevice_t *wlandev, UINT32 ethconv, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep)
+{
+
+	UINT16          fc;
+	UINT16          proto;
+	wlan_ethhdr_t   e_hdr;
+	wlan_llc_t      *e_llc;
+	wlan_snap_t     *e_snap;
+	int foo;
+
+	DBFENTER;
+	memcpy(&e_hdr, skb->data, sizeof(e_hdr));
+
+	if (skb->len <= 0) {
+		WLAN_LOG_DEBUG(1, "zero-length skb!\n");
+		return 1;
+	}
+
+	if ( ethconv == WLAN_ETHCONV_ENCAP ) { /* simplest case */
+	        WLAN_LOG_DEBUG(3, "ENCAP len: %d\n", skb->len);
+		/* here, we don't care what kind of ether frm. Just stick it */
+		/*  in the 80211 payload */
+		/* which is to say, leave the skb alone. */
+	} else {
+		/* step 1: classify ether frame, DIX or 802.3? */
+		proto = ntohs(e_hdr.type);
+		if ( proto <= 1500 ) {
+		        WLAN_LOG_DEBUG(3, "802.3 len: %d\n", skb->len);
+                        /* codes <= 1500 reserved for 802.3 lengths */
+			/* it's 802.3, pass ether payload unchanged,  */
+
+			/* trim off ethernet header */
+			skb_pull(skb, WLAN_ETHHDR_LEN);
+
+			/*   leave off any PAD octets.  */
+			skb_trim(skb, proto);
+		} else {
+		        WLAN_LOG_DEBUG(3, "DIXII len: %d\n", skb->len);
+			/* it's DIXII, time for some conversion */
+
+			/* trim off ethernet header */
+			skb_pull(skb, WLAN_ETHHDR_LEN);
+
+			/* tack on SNAP */
+			e_snap = (wlan_snap_t *) skb_push(skb, sizeof(wlan_snap_t));
+			e_snap->type = htons(proto);
+			if ( ethconv == WLAN_ETHCONV_8021h && p80211_stt_findproto(proto) ) {
+				memcpy( e_snap->oui, oui_8021h, WLAN_IEEE_OUI_LEN);
+			} else {
+				memcpy( e_snap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN);
+			}
+
+			/* tack on llc */
+			e_llc = (wlan_llc_t *) skb_push(skb, sizeof(wlan_llc_t));
+			e_llc->dsap = 0xAA;	/* SNAP, see IEEE 802 */
+			e_llc->ssap = 0xAA;
+			e_llc->ctl = 0x03;
+
+		}
+	}
+
+	/* Set up the 802.11 header */
+	/* It's a data frame */
+	fc = host2ieee16( WLAN_SET_FC_FTYPE(WLAN_FTYPE_DATA) |
+			  WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_DATAONLY));
+
+	switch ( wlandev->macmode ) {
+	case WLAN_MACMODE_IBSS_STA:
+		memcpy(p80211_hdr->a3.a1, &e_hdr.daddr, WLAN_ADDR_LEN);
+		memcpy(p80211_hdr->a3.a2, wlandev->netdev->dev_addr, WLAN_ADDR_LEN);
+		memcpy(p80211_hdr->a3.a3, wlandev->bssid, WLAN_ADDR_LEN);
+		break;
+	case WLAN_MACMODE_ESS_STA:
+		fc |= host2ieee16(WLAN_SET_FC_TODS(1));
+		memcpy(p80211_hdr->a3.a1, wlandev->bssid, WLAN_ADDR_LEN);
+		memcpy(p80211_hdr->a3.a2, wlandev->netdev->dev_addr, WLAN_ADDR_LEN);
+		memcpy(p80211_hdr->a3.a3, &e_hdr.daddr, WLAN_ADDR_LEN);
+		break;
+	case WLAN_MACMODE_ESS_AP:
+		fc |= host2ieee16(WLAN_SET_FC_FROMDS(1));
+		memcpy(p80211_hdr->a3.a1, &e_hdr.daddr, WLAN_ADDR_LEN);
+		memcpy(p80211_hdr->a3.a2, wlandev->bssid, WLAN_ADDR_LEN);
+		memcpy(p80211_hdr->a3.a3, &e_hdr.saddr, WLAN_ADDR_LEN);
+		break;
+	default:
+		WLAN_LOG_ERROR("Error: Converting eth to wlan in unknown mode.\n");
+		return 1;
+		break;
+	}
+
+	p80211_wep->data = NULL;
+
+	if ((wlandev->hostwep & HOSTWEP_PRIVACYINVOKED) && (wlandev->hostwep & HOSTWEP_ENCRYPT)) {
+		// XXXX need to pick keynum other than default?
+
+#if 1
+		p80211_wep->data = kmalloc(skb->len, GFP_ATOMIC);
+#else
+		p80211_wep->data = skb->data;
+#endif
+
+		if ((foo = wep_encrypt(wlandev, skb->data, p80211_wep->data,
+				       skb->len,
+				(wlandev->hostwep & HOSTWEP_DEFAULTKEY_MASK),
+				p80211_wep->iv, p80211_wep->icv))) {
+			WLAN_LOG_WARNING("Host en-WEP failed, dropping frame (%d).\n", foo);
+			return 2;
+		}
+		fc |= host2ieee16(WLAN_SET_FC_ISWEP(1));
+	}
+
+
+	//	skb->nh.raw = skb->data;
+
+	p80211_hdr->a3.fc = fc;
+	p80211_hdr->a3.dur = 0;
+	p80211_hdr->a3.seq = 0;
+
+	DBFEXIT;
+	return 0;
+}
+
+/* jkriegl: from orinoco, modified */
+static void orinoco_spy_gather(wlandevice_t *wlandev, char *mac,
+			       p80211_rxmeta_t *rxmeta)
+{
+        int i;
+
+        /* Gather wireless spy statistics: for each packet, compare the
+         * source address with out list, and if match, get the stats... */
+
+        for (i = 0; i < wlandev->spy_number; i++) {
+
+                if (!memcmp(wlandev->spy_address[i], mac, ETH_ALEN)) {
+			memcpy(wlandev->spy_address[i], mac, ETH_ALEN);
+                        wlandev->spy_stat[i].level = rxmeta->signal;
+                        wlandev->spy_stat[i].noise = rxmeta->noise;
+                        wlandev->spy_stat[i].qual = (rxmeta->signal > rxmeta->noise) ? \
+                                                     (rxmeta->signal - rxmeta->noise) : 0;
+                        wlandev->spy_stat[i].updated = 0x7;
+                }
+        }
+}
+
+/*----------------------------------------------------------------
+* p80211pb_80211_to_ether
+*
+* Uses the contents of a received 802.11 frame and the etherconv
+* setting to build an ether frame.
+*
+* This function extracts the src and dest address from the 802.11
+* frame to use in the construction of the eth frame.
+*
+* Arguments:
+*	ethconv		Conversion type to perform
+*	skb		Packet buffer containing the 802.11 frame
+*
+* Returns:
+*	0 on success, non-zero otherwise
+*
+* Call context:
+*	May be called in interrupt or non-interrupt context
+----------------------------------------------------------------*/
+int skb_p80211_to_ether( wlandevice_t *wlandev, UINT32 ethconv, struct sk_buff *skb)
+{
+	netdevice_t     *netdev = wlandev->netdev;
+	UINT16          fc;
+	UINT            payload_length;
+	UINT            payload_offset;
+	UINT8		daddr[WLAN_ETHADDR_LEN];
+	UINT8		saddr[WLAN_ETHADDR_LEN];
+	p80211_hdr_t    *w_hdr;
+	wlan_ethhdr_t   *e_hdr;
+	wlan_llc_t      *e_llc;
+	wlan_snap_t     *e_snap;
+
+	int foo;
+
+	DBFENTER;
+
+	payload_length = skb->len - WLAN_HDR_A3_LEN - WLAN_CRC_LEN;
+	payload_offset = WLAN_HDR_A3_LEN;
+
+	w_hdr = (p80211_hdr_t *) skb->data;
+
+        /* setup some vars for convenience */
+	fc = ieee2host16(w_hdr->a3.fc);
+	if ( (WLAN_GET_FC_TODS(fc) == 0) && (WLAN_GET_FC_FROMDS(fc) == 0) ) {
+		memcpy(daddr, w_hdr->a3.a1, WLAN_ETHADDR_LEN);
+		memcpy(saddr, w_hdr->a3.a2, WLAN_ETHADDR_LEN);
+	} else if( (WLAN_GET_FC_TODS(fc) == 0) && (WLAN_GET_FC_FROMDS(fc) == 1) ) {
+		memcpy(daddr, w_hdr->a3.a1, WLAN_ETHADDR_LEN);
+		memcpy(saddr, w_hdr->a3.a3, WLAN_ETHADDR_LEN);
+	} else if( (WLAN_GET_FC_TODS(fc) == 1) && (WLAN_GET_FC_FROMDS(fc) == 0) ) {
+		memcpy(daddr, w_hdr->a3.a3, WLAN_ETHADDR_LEN);
+		memcpy(saddr, w_hdr->a3.a2, WLAN_ETHADDR_LEN);
+	} else {
+		payload_offset = WLAN_HDR_A4_LEN;
+		payload_length -= ( WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN );
+		if (payload_length < 0 ) {
+			WLAN_LOG_ERROR("A4 frame too short!\n");
+			return 1;
+		}
+		memcpy(daddr, w_hdr->a4.a3, WLAN_ETHADDR_LEN);
+		memcpy(saddr, w_hdr->a4.a4, WLAN_ETHADDR_LEN);
+	}
+
+	/* perform de-wep if necessary.. */
+	if ((wlandev->hostwep & HOSTWEP_PRIVACYINVOKED) && WLAN_GET_FC_ISWEP(fc) && (wlandev->hostwep & HOSTWEP_DECRYPT)) {
+		if (payload_length <= 8) {
+			WLAN_LOG_ERROR("WEP frame too short (%u).\n",
+					skb->len);
+			return 1;
+		}
+		if ((foo = wep_decrypt(wlandev, skb->data + payload_offset + 4,
+				       payload_length - 8, -1,
+				       skb->data + payload_offset,
+				       skb->data + payload_offset + payload_length - 4))) {
+			/* de-wep failed, drop skb. */
+			WLAN_LOG_DEBUG(1, "Host de-WEP failed, dropping frame (%d).\n", foo);
+			wlandev->rx.decrypt_err++;
+			return 2;
+		}
+
+		/* subtract the IV+ICV length off the payload */
+		payload_length -= 8;
+		/* chop off the IV */
+		skb_pull(skb, 4);
+		/* chop off the ICV. */
+		skb_trim(skb, skb->len - 4);
+
+		wlandev->rx.decrypt++;
+	}
+
+	e_hdr = (wlan_ethhdr_t *) (skb->data + payload_offset);
+
+	e_llc = (wlan_llc_t *) (skb->data + payload_offset);
+	e_snap = (wlan_snap_t *) (skb->data + payload_offset + sizeof(wlan_llc_t));
+
+	/* Test for the various encodings */
+	if ( (payload_length >= sizeof(wlan_ethhdr_t)) &&
+	     ( e_llc->dsap != 0xaa || e_llc->ssap != 0xaa ) &&
+	     ((memcmp(daddr, e_hdr->daddr, WLAN_ETHADDR_LEN) == 0) ||
+	     (memcmp(saddr, e_hdr->saddr, WLAN_ETHADDR_LEN) == 0))) {
+		WLAN_LOG_DEBUG(3, "802.3 ENCAP len: %d\n", payload_length);
+		/* 802.3 Encapsulated */
+		/* Test for an overlength frame */
+		if ( payload_length > (netdev->mtu + WLAN_ETHHDR_LEN)) {
+			/* A bogus length ethfrm has been encap'd. */
+			/* Is someone trying an oflow attack? */
+			WLAN_LOG_ERROR("ENCAP frame too large (%d > %d)\n",
+				payload_length, netdev->mtu + WLAN_ETHHDR_LEN);
+			return 1;
+		}
+
+		/* Chop off the 802.11 header.  it's already sane. */
+		skb_pull(skb, payload_offset);
+		/* chop off the 802.11 CRC */
+		skb_trim(skb, skb->len - WLAN_CRC_LEN);
+
+	} else if ((payload_length >= sizeof(wlan_llc_t) + sizeof(wlan_snap_t)) &&
+		   (e_llc->dsap == 0xaa) &&
+		   (e_llc->ssap == 0xaa) &&
+		   (e_llc->ctl == 0x03) &&
+		   (((memcmp( e_snap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN)==0) &&
+		    (ethconv == WLAN_ETHCONV_8021h) &&
+		    (p80211_stt_findproto(ieee2host16(e_snap->type)))) ||
+		    (memcmp( e_snap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN)!=0)))
+	{
+		WLAN_LOG_DEBUG(3, "SNAP+RFC1042 len: %d\n", payload_length);
+		/* it's a SNAP + RFC1042 frame && protocol is in STT */
+		/* build 802.3 + RFC1042 */
+
+		/* Test for an overlength frame */
+		if ( payload_length > netdev->mtu ) {
+			/* A bogus length ethfrm has been sent. */
+			/* Is someone trying an oflow attack? */
+			WLAN_LOG_ERROR("SNAP frame too large (%d > %d)\n",
+				payload_length, netdev->mtu);
+			return 1;
+		}
+
+		/* chop 802.11 header from skb. */
+		skb_pull(skb, payload_offset);
+
+		/* create 802.3 header at beginning of skb. */
+		e_hdr = (wlan_ethhdr_t *) skb_push(skb, WLAN_ETHHDR_LEN);
+		memcpy(e_hdr->daddr, daddr, WLAN_ETHADDR_LEN);
+		memcpy(e_hdr->saddr, saddr, WLAN_ETHADDR_LEN);
+		e_hdr->type = htons(payload_length);
+
+		/* chop off the 802.11 CRC */
+		skb_trim(skb, skb->len - WLAN_CRC_LEN);
+
+	}  else if ((payload_length >= sizeof(wlan_llc_t) + sizeof(wlan_snap_t)) &&
+		    (e_llc->dsap == 0xaa) &&
+		    (e_llc->ssap == 0xaa) &&
+		    (e_llc->ctl == 0x03) ) {
+		WLAN_LOG_DEBUG(3, "802.1h/RFC1042 len: %d\n", payload_length);
+		/* it's an 802.1h frame || (an RFC1042 && protocol is not in STT) */
+		/* build a DIXII + RFC894 */
+
+		/* Test for an overlength frame */
+		if ((payload_length - sizeof(wlan_llc_t) - sizeof(wlan_snap_t))
+		    > netdev->mtu) {
+			/* A bogus length ethfrm has been sent. */
+			/* Is someone trying an oflow attack? */
+			WLAN_LOG_ERROR("DIXII frame too large (%ld > %d)\n",
+					(long int) (payload_length - sizeof(wlan_llc_t) -
+						    sizeof(wlan_snap_t)),
+					netdev->mtu);
+			return 1;
+		}
+
+		/* chop 802.11 header from skb. */
+		skb_pull(skb, payload_offset);
+
+		/* chop llc header from skb. */
+		skb_pull(skb, sizeof(wlan_llc_t));
+
+		/* chop snap header from skb. */
+		skb_pull(skb, sizeof(wlan_snap_t));
+
+		/* create 802.3 header at beginning of skb. */
+		e_hdr = (wlan_ethhdr_t *) skb_push(skb, WLAN_ETHHDR_LEN);
+		e_hdr->type = e_snap->type;
+		memcpy(e_hdr->daddr, daddr, WLAN_ETHADDR_LEN);
+		memcpy(e_hdr->saddr, saddr, WLAN_ETHADDR_LEN);
+
+		/* chop off the 802.11 CRC */
+		skb_trim(skb, skb->len - WLAN_CRC_LEN);
+	} else {
+		WLAN_LOG_DEBUG(3, "NON-ENCAP len: %d\n", payload_length);
+		/* any NON-ENCAP */
+		/* it's a generic 80211+LLC or IPX 'Raw 802.3' */
+		/*  build an 802.3 frame */
+		/* allocate space and setup hostbuf */
+
+		/* Test for an overlength frame */
+		if ( payload_length > netdev->mtu ) {
+			/* A bogus length ethfrm has been sent. */
+			/* Is someone trying an oflow attack? */
+			WLAN_LOG_ERROR("OTHER frame too large (%d > %d)\n",
+				payload_length,
+				netdev->mtu);
+			return 1;
+		}
+
+		/* Chop off the 802.11 header. */
+		skb_pull(skb, payload_offset);
+
+		/* create 802.3 header at beginning of skb. */
+		e_hdr = (wlan_ethhdr_t *) skb_push(skb, WLAN_ETHHDR_LEN);
+		memcpy(e_hdr->daddr, daddr, WLAN_ETHADDR_LEN);
+		memcpy(e_hdr->saddr, saddr, WLAN_ETHADDR_LEN);
+		e_hdr->type = htons(payload_length);
+
+		/* chop off the 802.11 CRC */
+		skb_trim(skb, skb->len - WLAN_CRC_LEN);
+
+	}
+
+	skb->protocol = eth_type_trans(skb, netdev);
+	skb_reset_mac_header(skb);
+
+        /* jkriegl: process signal and noise as set in hfa384x_int_rx() */
+	/* jkriegl: only process signal/noise if requested by iwspy */
+        if (wlandev->spy_number)
+                orinoco_spy_gather(wlandev, eth_hdr(skb)->h_source, P80211SKB_RXMETA(skb));
+
+	/* Free the metadata */
+	p80211skb_rxmeta_detach(skb);
+
+	DBFEXIT;
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* p80211_stt_findproto
+*
+* Searches the 802.1h Selective Translation Table for a given
+* protocol.
+*
+* Arguments:
+*	proto	protocl number (in host order) to search for.
+*
+* Returns:
+*	1 - if the table is empty or a match is found.
+*	0 - if the table is non-empty and a match is not found.
+*
+* Call context:
+*	May be called in interrupt or non-interrupt context
+----------------------------------------------------------------*/
+int p80211_stt_findproto(UINT16 proto)
+{
+	/* Always return found for now.  This is the behavior used by the */
+	/*  Zoom Win95 driver when 802.1h mode is selected */
+	/* TODO: If necessary, add an actual search we'll probably
+		 need this to match the CMAC's way of doing things.
+		 Need to do some testing to confirm.
+	*/
+
+	if (proto == 0x80f3)  /* APPLETALK */
+		return 1;
+
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* p80211skb_rxmeta_detach
+*
+* Disconnects the frmmeta and rxmeta from an skb.
+*
+* Arguments:
+*	wlandev		The wlandev this skb belongs to.
+*	skb		The skb we're attaching to.
+*
+* Returns:
+*	0 on success, non-zero otherwise
+*
+* Call context:
+*	May be called in interrupt or non-interrupt context
+----------------------------------------------------------------*/
+void
+p80211skb_rxmeta_detach(struct sk_buff *skb)
+{
+	p80211_rxmeta_t		*rxmeta;
+	p80211_frmmeta_t	*frmmeta;
+
+	DBFENTER;
+	/* Sanity checks */
+	if ( skb==NULL ) {			/* bad skb */
+		WLAN_LOG_DEBUG(1, "Called w/ null skb.\n");
+		goto exit;
+	}
+	frmmeta = P80211SKB_FRMMETA(skb);
+	if ( frmmeta == NULL ) { 		/* no magic */
+		WLAN_LOG_DEBUG(1, "Called w/ bad frmmeta magic.\n");
+		goto exit;
+	}
+	rxmeta = frmmeta->rx;
+	if ( rxmeta == NULL ) {			/* bad meta ptr */
+		WLAN_LOG_DEBUG(1, "Called w/ bad rxmeta ptr.\n");
+		goto exit;
+	}
+
+	/* Free rxmeta */
+	kfree(rxmeta);
+
+	/* Clear skb->cb */
+	memset(skb->cb, 0, sizeof(skb->cb));
+exit:
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* p80211skb_rxmeta_attach
+*
+* Allocates a p80211rxmeta structure, initializes it, and attaches
+* it to an skb.
+*
+* Arguments:
+*	wlandev		The wlandev this skb belongs to.
+*	skb		The skb we're attaching to.
+*
+* Returns:
+*	0 on success, non-zero otherwise
+*
+* Call context:
+*	May be called in interrupt or non-interrupt context
+----------------------------------------------------------------*/
+int
+p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb)
+{
+	int			result = 0;
+	p80211_rxmeta_t		*rxmeta;
+	p80211_frmmeta_t	*frmmeta;
+
+	DBFENTER;
+
+	/* If these already have metadata, we error out! */
+	if (P80211SKB_RXMETA(skb) != NULL) {
+		WLAN_LOG_ERROR("%s: RXmeta already attached!\n",
+				wlandev->name);
+		result = 0;
+		goto exit;
+	}
+
+	/* Allocate the rxmeta */
+	rxmeta = kmalloc(sizeof(p80211_rxmeta_t), GFP_ATOMIC);
+
+	if ( rxmeta == NULL ) {
+		WLAN_LOG_ERROR("%s: Failed to allocate rxmeta.\n",
+				wlandev->name);
+		result = 1;
+		goto exit;
+	}
+
+	/* Initialize the rxmeta */
+	memset(rxmeta, 0, sizeof(p80211_rxmeta_t));
+	rxmeta->wlandev = wlandev;
+	rxmeta->hosttime = jiffies;
+
+	/* Overlay a frmmeta_t onto skb->cb */
+	memset(skb->cb, 0, sizeof(p80211_frmmeta_t));
+	frmmeta = (p80211_frmmeta_t*)(skb->cb);
+	frmmeta->magic = P80211_FRMMETA_MAGIC;
+	frmmeta->rx = rxmeta;
+exit:
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* p80211skb_free
+*
+* Frees an entire p80211skb by checking and freeing the meta struct
+* and then freeing the skb.
+*
+* Arguments:
+*	wlandev		The wlandev this skb belongs to.
+*	skb		The skb we're attaching to.
+*
+* Returns:
+*	0 on success, non-zero otherwise
+*
+* Call context:
+*	May be called in interrupt or non-interrupt context
+----------------------------------------------------------------*/
+void
+p80211skb_free(struct wlandevice *wlandev, struct sk_buff *skb)
+{
+	p80211_frmmeta_t	*meta;
+	DBFENTER;
+	meta = P80211SKB_FRMMETA(skb);
+	if ( meta && meta->rx) {
+		p80211skb_rxmeta_detach(skb);
+	} else {
+		WLAN_LOG_ERROR("Freeing an skb (%p) w/ no frmmeta.\n", skb);
+	}
+
+	dev_kfree_skb(skb);
+	DBFEXIT;
+	return;
+}
diff --git a/drivers/staging/wlan-ng/p80211conv.h b/drivers/staging/wlan-ng/p80211conv.h
new file mode 100644
index 0000000..3f5ab57c
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211conv.h
@@ -0,0 +1,186 @@
+/* p80211conv.h
+*
+* Ether/802.11 conversions and packet buffer routines
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares the functions, types and macros that perform
+* Ethernet to/from 802.11 frame conversions.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _LINUX_P80211CONV_H
+#define _LINUX_P80211CONV_H
+
+/*================================================================*/
+/* Constants */
+
+#define WLAN_ETHADDR_LEN	6
+#define WLAN_IEEE_OUI_LEN	3
+
+#define WLAN_ETHCONV_ENCAP	1
+#define WLAN_ETHCONV_RFC1042	2
+#define WLAN_ETHCONV_8021h	3
+
+#define WLAN_MIN_ETHFRM_LEN	60
+#define WLAN_MAX_ETHFRM_LEN	1514
+#define WLAN_ETHHDR_LEN		14
+
+#define P80211CAPTURE_VERSION	0x80211001
+
+/*================================================================*/
+/* Macros */
+
+#define	P80211_FRMMETA_MAGIC		0x802110
+
+#define P80211SKB_FRMMETA(s) \
+	(((((p80211_frmmeta_t*)((s)->cb))->magic)==P80211_FRMMETA_MAGIC) ? \
+		((p80211_frmmeta_t*)((s)->cb)) : \
+		(NULL))
+
+#define P80211SKB_RXMETA(s) \
+	(P80211SKB_FRMMETA((s)) ?  P80211SKB_FRMMETA((s))->rx : ((p80211_rxmeta_t*)(NULL)))
+
+typedef struct p80211_rxmeta
+{
+	struct wlandevice	*wlandev;
+
+	UINT64	mactime;	/* Hi-rez MAC-supplied time value */
+	UINT64	hosttime;	/* Best-rez host supplied time value */
+
+	UINT	rxrate;		/* Receive data rate in 100kbps */
+	UINT	priority;	/* 0-15, 0=contention, 6=CF */
+	INT	signal;		/* An SSI, see p80211netdev.h */
+	INT	noise;		/* An SSI, see p80211netdev.h */
+	UINT	channel;	/* Receive channel (mostly for snifs) */
+	UINT	preamble;	/* P80211ENUM_preambletype_* */
+	UINT	encoding;	/* P80211ENUM_encoding_* */
+
+} p80211_rxmeta_t;
+
+typedef struct p80211_frmmeta
+{
+	UINT			magic;
+	p80211_rxmeta_t		*rx;
+} p80211_frmmeta_t;
+
+void p80211skb_free(struct wlandevice *wlandev, struct sk_buff *skb);
+int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb);
+void p80211skb_rxmeta_detach(struct sk_buff *skb);
+
+/*================================================================*/
+/* Types */
+
+/*
+ * Frame capture header.  (See doc/capturefrm.txt)
+ */
+typedef struct p80211_caphdr
+{
+	UINT32		version;
+	UINT32		length;
+	UINT64		mactime;
+	UINT64		hosttime;
+	UINT32		phytype;
+	UINT32		channel;
+	UINT32		datarate;
+	UINT32		antenna;
+	UINT32		priority;
+	UINT32		ssi_type;
+	INT32		ssi_signal;
+	INT32		ssi_noise;
+	UINT32		preamble;
+	UINT32		encoding;
+} p80211_caphdr_t;
+
+/* buffer free method pointer type */
+typedef void (* freebuf_method_t)(void *buf, int size);
+
+typedef struct p80211_metawep {
+	void  *data;
+	UINT8 iv[4];
+	UINT8 icv[4];
+} p80211_metawep_t;
+
+/* local ether header type */
+typedef struct wlan_ethhdr
+{
+	UINT8	daddr[WLAN_ETHADDR_LEN];
+	UINT8	saddr[WLAN_ETHADDR_LEN];
+	UINT16	type;
+} __WLAN_ATTRIB_PACK__ wlan_ethhdr_t;
+
+/* local llc header type */
+typedef struct wlan_llc
+{
+	UINT8	dsap;
+	UINT8	ssap;
+	UINT8	ctl;
+} __WLAN_ATTRIB_PACK__ wlan_llc_t;
+
+/* local snap header type */
+typedef struct wlan_snap
+{
+	UINT8	oui[WLAN_IEEE_OUI_LEN];
+	UINT16	type;
+} __WLAN_ATTRIB_PACK__ wlan_snap_t;
+
+/* Circular include trick */
+struct wlandevice;
+
+/*================================================================*/
+/* Externs */
+
+/*================================================================*/
+/*Function Declarations */
+
+int skb_p80211_to_ether( struct wlandevice *wlandev, UINT32 ethconv,
+			 struct sk_buff *skb);
+int skb_ether_to_p80211( struct wlandevice *wlandev, UINT32 ethconv,
+			 struct sk_buff *skb, p80211_hdr_t *p80211_hdr,
+			 p80211_metawep_t *p80211_wep );
+
+int p80211_stt_findproto(UINT16 proto);
+int p80211_stt_addproto(UINT16 proto);
+
+#endif
diff --git a/drivers/staging/wlan-ng/p80211hdr.h b/drivers/staging/wlan-ng/p80211hdr.h
new file mode 100644
index 0000000..b7b0872
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211hdr.h
@@ -0,0 +1,299 @@
+/* p80211hdr.h
+*
+* Macros, types, and functions for handling 802.11 MAC headers
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares the constants and types used in the interface
+* between a wlan driver and the user mode utilities.
+*
+* Note:
+*  - Constant values are always in HOST byte order.  To assign
+*    values to multi-byte fields they _must_ be converted to
+*    ieee byte order.  To retrieve multi-byte values from incoming
+*    frames, they must be converted to host order.
+*
+* All functions declared here are implemented in p80211.c
+* --------------------------------------------------------------------
+*/
+
+#ifndef _P80211HDR_H
+#define _P80211HDR_H
+
+/*================================================================*/
+/* System Includes */
+
+/*================================================================*/
+/* Project Includes */
+
+#ifndef  _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+
+/*================================================================*/
+/* Constants */
+
+/*--- Sizes -----------------------------------------------*/
+#define WLAN_ADDR_LEN			6
+#define WLAN_CRC_LEN			4
+#define WLAN_BSSID_LEN			6
+#define WLAN_BSS_TS_LEN			8
+#define WLAN_HDR_A3_LEN			24
+#define WLAN_HDR_A4_LEN			30
+#define WLAN_SSID_MAXLEN		32
+#define WLAN_DATA_MAXLEN		2312
+#define WLAN_A3FR_MAXLEN		(WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)
+#define WLAN_A4FR_MAXLEN		(WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)
+#define WLAN_BEACON_FR_MAXLEN		(WLAN_HDR_A3_LEN + 334)
+#define WLAN_ATIM_FR_MAXLEN		(WLAN_HDR_A3_LEN + 0)
+#define WLAN_DISASSOC_FR_MAXLEN		(WLAN_HDR_A3_LEN + 2)
+#define WLAN_ASSOCREQ_FR_MAXLEN		(WLAN_HDR_A3_LEN + 48)
+#define WLAN_ASSOCRESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 16)
+#define WLAN_REASSOCREQ_FR_MAXLEN	(WLAN_HDR_A3_LEN + 54)
+#define WLAN_REASSOCRESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 16)
+#define WLAN_PROBEREQ_FR_MAXLEN		(WLAN_HDR_A3_LEN + 44)
+#define WLAN_PROBERESP_FR_MAXLEN	(WLAN_HDR_A3_LEN + 78)
+#define WLAN_AUTHEN_FR_MAXLEN		(WLAN_HDR_A3_LEN + 261)
+#define WLAN_DEAUTHEN_FR_MAXLEN		(WLAN_HDR_A3_LEN + 2)
+#define WLAN_WEP_NKEYS			4
+#define WLAN_WEP_MAXKEYLEN		13
+#define WLAN_CHALLENGE_IE_LEN		130
+#define WLAN_CHALLENGE_LEN		128
+#define WLAN_WEP_IV_LEN			4
+#define WLAN_WEP_ICV_LEN		4
+
+/*--- Frame Control Field -------------------------------------*/
+/* Frame Types */
+#define WLAN_FTYPE_MGMT			0x00
+#define WLAN_FTYPE_CTL			0x01
+#define WLAN_FTYPE_DATA			0x02
+
+/* Frame subtypes */
+/* Management */
+#define WLAN_FSTYPE_ASSOCREQ		0x00
+#define WLAN_FSTYPE_ASSOCRESP		0x01
+#define WLAN_FSTYPE_REASSOCREQ		0x02
+#define WLAN_FSTYPE_REASSOCRESP		0x03
+#define WLAN_FSTYPE_PROBEREQ		0x04
+#define WLAN_FSTYPE_PROBERESP		0x05
+#define WLAN_FSTYPE_BEACON		0x08
+#define WLAN_FSTYPE_ATIM		0x09
+#define WLAN_FSTYPE_DISASSOC		0x0a
+#define WLAN_FSTYPE_AUTHEN		0x0b
+#define WLAN_FSTYPE_DEAUTHEN		0x0c
+
+/* Control */
+#define WLAN_FSTYPE_BLOCKACKREQ		0x8
+#define WLAN_FSTYPE_BLOCKACK  		0x9
+#define WLAN_FSTYPE_PSPOLL		0x0a
+#define WLAN_FSTYPE_RTS			0x0b
+#define WLAN_FSTYPE_CTS			0x0c
+#define WLAN_FSTYPE_ACK			0x0d
+#define WLAN_FSTYPE_CFEND		0x0e
+#define WLAN_FSTYPE_CFENDCFACK		0x0f
+
+/* Data */
+#define WLAN_FSTYPE_DATAONLY		0x00
+#define WLAN_FSTYPE_DATA_CFACK		0x01
+#define WLAN_FSTYPE_DATA_CFPOLL		0x02
+#define WLAN_FSTYPE_DATA_CFACK_CFPOLL	0x03
+#define WLAN_FSTYPE_NULL		0x04
+#define WLAN_FSTYPE_CFACK		0x05
+#define WLAN_FSTYPE_CFPOLL		0x06
+#define WLAN_FSTYPE_CFACK_CFPOLL	0x07
+
+
+/*================================================================*/
+/* Macros */
+
+/*--- FC Macros ----------------------------------------------*/
+/* Macros to get/set the bitfields of the Frame Control Field */
+/*  GET_FC_??? - takes the host byte-order value of an FC     */
+/*               and retrieves the value of one of the        */
+/*               bitfields and moves that value so its lsb is */
+/*               in bit 0.                                    */
+/*  SET_FC_??? - takes a host order value for one of the FC   */
+/*               bitfields and moves it to the proper bit     */
+/*               location for ORing into a host order FC.     */
+/*               To send the FC produced from SET_FC_???,     */
+/*               one must put the bytes in IEEE order.        */
+/*  e.g.                                                      */
+/*     printf("the frame subtype is %x",                      */
+/*                 GET_FC_FTYPE( ieee2host( rx.fc )))         */
+/*                                                            */
+/*     tx.fc = host2ieee( SET_FC_FTYPE(WLAN_FTYP_CTL) |       */
+/*                        SET_FC_FSTYPE(WLAN_FSTYPE_RTS) );   */
+/*------------------------------------------------------------*/
+
+#define WLAN_GET_FC_PVER(n)	 (((UINT16)(n)) & (BIT0 | BIT1))
+#define WLAN_GET_FC_FTYPE(n)	((((UINT16)(n)) & (BIT2 | BIT3)) >> 2)
+#define WLAN_GET_FC_FSTYPE(n)	((((UINT16)(n)) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
+#define WLAN_GET_FC_TODS(n) 	((((UINT16)(n)) & (BIT8)) >> 8)
+#define WLAN_GET_FC_FROMDS(n)	((((UINT16)(n)) & (BIT9)) >> 9)
+#define WLAN_GET_FC_MOREFRAG(n) ((((UINT16)(n)) & (BIT10)) >> 10)
+#define WLAN_GET_FC_RETRY(n)	((((UINT16)(n)) & (BIT11)) >> 11)
+#define WLAN_GET_FC_PWRMGT(n)	((((UINT16)(n)) & (BIT12)) >> 12)
+#define WLAN_GET_FC_MOREDATA(n) ((((UINT16)(n)) & (BIT13)) >> 13)
+#define WLAN_GET_FC_ISWEP(n)	((((UINT16)(n)) & (BIT14)) >> 14)
+#define WLAN_GET_FC_ORDER(n)	((((UINT16)(n)) & (BIT15)) >> 15)
+
+#define WLAN_SET_FC_PVER(n)	((UINT16)(n))
+#define WLAN_SET_FC_FTYPE(n)	(((UINT16)(n)) << 2)
+#define WLAN_SET_FC_FSTYPE(n)	(((UINT16)(n)) << 4)
+#define WLAN_SET_FC_TODS(n) 	(((UINT16)(n)) << 8)
+#define WLAN_SET_FC_FROMDS(n)	(((UINT16)(n)) << 9)
+#define WLAN_SET_FC_MOREFRAG(n) (((UINT16)(n)) << 10)
+#define WLAN_SET_FC_RETRY(n)	(((UINT16)(n)) << 11)
+#define WLAN_SET_FC_PWRMGT(n)	(((UINT16)(n)) << 12)
+#define WLAN_SET_FC_MOREDATA(n) (((UINT16)(n)) << 13)
+#define WLAN_SET_FC_ISWEP(n)	(((UINT16)(n)) << 14)
+#define WLAN_SET_FC_ORDER(n)	(((UINT16)(n)) << 15)
+
+/*--- Duration Macros ----------------------------------------*/
+/* Macros to get/set the bitfields of the Duration Field      */
+/*  - the duration value is only valid when bit15 is zero     */
+/*  - the firmware handles these values, so I'm not going     */
+/*    these macros right now.                                 */
+/*------------------------------------------------------------*/
+
+/*--- Sequence Control  Macros -------------------------------*/
+/* Macros to get/set the bitfields of the Sequence Control    */
+/* Field.                                                     */
+/*------------------------------------------------------------*/
+#define WLAN_GET_SEQ_FRGNUM(n) (((UINT16)(n)) & (BIT0|BIT1|BIT2|BIT3))
+#define WLAN_GET_SEQ_SEQNUM(n) ((((UINT16)(n)) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
+
+/*--- Data ptr macro -----------------------------------------*/
+/* Creates a UINT8* to the data portion of a frame            */
+/* Assumes you're passing in a ptr to the beginning of the hdr*/
+/*------------------------------------------------------------*/
+#define WLAN_HDR_A3_DATAP(p) (((UINT8*)(p)) + WLAN_HDR_A3_LEN)
+#define WLAN_HDR_A4_DATAP(p) (((UINT8*)(p)) + WLAN_HDR_A4_LEN)
+
+#define DOT11_RATE5_ISBASIC_GET(r)     (((UINT8)(r)) & BIT7)
+
+/*================================================================*/
+/* Types */
+
+/* BSS Timestamp */
+typedef UINT8 wlan_bss_ts_t[WLAN_BSS_TS_LEN];
+
+/* Generic 802.11 Header types */
+
+typedef struct p80211_hdr_a3
+{
+	UINT16	fc;
+	UINT16	dur;
+	UINT8	a1[WLAN_ADDR_LEN];
+	UINT8	a2[WLAN_ADDR_LEN];
+	UINT8	a3[WLAN_ADDR_LEN];
+	UINT16	seq;
+} __WLAN_ATTRIB_PACK__ p80211_hdr_a3_t;
+
+typedef struct p80211_hdr_a4
+{
+	UINT16	fc;
+	UINT16	dur;
+	UINT8	a1[WLAN_ADDR_LEN];
+	UINT8	a2[WLAN_ADDR_LEN];
+	UINT8	a3[WLAN_ADDR_LEN];
+	UINT16	seq;
+	UINT8	a4[WLAN_ADDR_LEN];
+} __WLAN_ATTRIB_PACK__ p80211_hdr_a4_t;
+
+typedef union p80211_hdr
+{
+	p80211_hdr_a3_t		a3;
+	p80211_hdr_a4_t		a4;
+} __WLAN_ATTRIB_PACK__ p80211_hdr_t;
+
+
+/*================================================================*/
+/* Extern Declarations */
+
+
+/*================================================================*/
+/* Function Declarations */
+
+/* Frame and header lenght macros */
+
+#define WLAN_CTL_FRAMELEN(fstype) (\
+	(fstype) == WLAN_FSTYPE_BLOCKACKREQ	? 24 : \
+	(fstype) == WLAN_FSTYPE_BLOCKACK   	? 152 : \
+	(fstype) == WLAN_FSTYPE_PSPOLL		? 20 : \
+	(fstype) == WLAN_FSTYPE_RTS		? 20 : \
+	(fstype) == WLAN_FSTYPE_CTS		? 14 : \
+	(fstype) == WLAN_FSTYPE_ACK		? 14 : \
+	(fstype) == WLAN_FSTYPE_CFEND		? 20 : \
+	(fstype) == WLAN_FSTYPE_CFENDCFACK	? 20 : 4)
+
+#define WLAN_FCS_LEN			4
+
+/* ftcl in HOST order */
+inline static UINT16 p80211_headerlen(UINT16 fctl)
+{
+	UINT16 hdrlen = 0;
+
+	switch ( WLAN_GET_FC_FTYPE(fctl) ) {
+	case WLAN_FTYPE_MGMT:
+		hdrlen = WLAN_HDR_A3_LEN;
+		break;
+	case WLAN_FTYPE_DATA:
+		hdrlen = WLAN_HDR_A3_LEN;
+		if ( WLAN_GET_FC_TODS(fctl) && WLAN_GET_FC_FROMDS(fctl) ) {
+			hdrlen += WLAN_ADDR_LEN;
+		}
+		break;
+	case WLAN_FTYPE_CTL:
+		hdrlen = WLAN_CTL_FRAMELEN(WLAN_GET_FC_FSTYPE(fctl)) -
+			WLAN_FCS_LEN;
+		break;
+	default:
+		hdrlen = WLAN_HDR_A3_LEN;
+	}
+
+	return hdrlen;
+}
+
+#endif /* _P80211HDR_H */
diff --git a/drivers/staging/wlan-ng/p80211ioctl.h b/drivers/staging/wlan-ng/p80211ioctl.h
new file mode 100644
index 0000000..25b2ea8
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211ioctl.h
@@ -0,0 +1,123 @@
+/* p80211ioctl.h
+*
+* Declares constants and types for the p80211 ioctls
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+*  While this file is called 'ioctl' is purpose goes a little beyond
+*  that.  This file defines the types and contants used to implement
+*  the p80211 request/confirm/indicate interfaces on Linux.  The
+*  request/confirm interface is, in fact, normally implemented as an
+*  ioctl.  The indicate interface on the other hand, is implemented
+*  using the Linux 'netlink' interface.
+*
+*  The reason I say that request/confirm is 'normally' implemented
+*  via ioctl is that we're reserving the right to be able to send
+*  request commands via the netlink interface.  This will be necessary
+*  if we ever need to send request messages when there aren't any
+*  wlan network devices present (i.e. sending a message that only p80211
+*  cares about.
+* --------------------------------------------------------------------
+*/
+
+
+#ifndef _P80211IOCTL_H
+#define _P80211IOCTL_H
+
+/*================================================================*/
+/* Constants */
+
+/*----------------------------------------------------------------*/
+/* p80211 ioctl "request" codes.  See argument 2 of ioctl(2). */
+
+#define P80211_IFTEST		(SIOCDEVPRIVATE + 0)
+#define P80211_IFREQ		(SIOCDEVPRIVATE + 1)
+
+/*----------------------------------------------------------------*/
+/* Magic number, a quick test to see we're getting the desired struct */
+
+#define P80211_IOCTL_MAGIC	(0x4a2d464dUL)
+
+/*----------------------------------------------------------------*/
+/* Netlink protocol numbers for the indication interface */
+
+#define P80211_NL_SOCK_IND	NETLINK_USERSOCK
+
+/*----------------------------------------------------------------*/
+/* Netlink multicast bits for different types of messages */
+
+#define P80211_NL_MCAST_GRP_MLME	BIT0	/* Local station messages */
+#define P80211_NL_MCAST_GRP_SNIFF	BIT1	/* Sniffer messages */
+#define P80211_NL_MCAST_GRP_DIST	BIT2	/* Distribution system messages */
+
+/*================================================================*/
+/* Macros */
+
+
+/*================================================================*/
+/* Types */
+
+/*----------------------------------------------------------------*/
+/* A ptr to the following structure type is passed as the third */
+/*  argument to the ioctl system call when issuing a request to */
+/*  the p80211 module. */
+
+typedef struct p80211ioctl_req
+{
+	char 	name[WLAN_DEVNAMELEN_MAX];
+	caddr_t data;
+	UINT32	magic;
+	UINT16	len;
+	UINT32	result;
+} __WLAN_ATTRIB_PACK__ p80211ioctl_req_t;
+
+
+/*================================================================*/
+/* Extern Declarations */
+
+
+/*================================================================*/
+/* Function Declarations */
+
+
+#endif /* _P80211IOCTL_H */
diff --git a/drivers/staging/wlan-ng/p80211meta.h b/drivers/staging/wlan-ng/p80211meta.h
new file mode 100644
index 0000000..5cb3f5a
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211meta.h
@@ -0,0 +1,169 @@
+/* p80211meta.h
+*
+* Macros, constants, types, and funcs for p80211 metadata
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares some of the constants and types used in various
+* parts of the linux-wlan system.
+*
+* Notes:
+*   - Constant values are always in HOST byte order.
+*
+* All functions and statics declared here are implemented in p80211types.c
+*   --------------------------------------------------------------------
+*/
+
+#ifndef _P80211META_H
+#define _P80211META_H
+
+/*================================================================*/
+/* System Includes */
+
+/*================================================================*/
+/* Project Includes */
+
+#ifndef _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+/*================================================================*/
+/* Constants */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Macros */
+
+/*----------------------------------------------------------------*/
+/* The following macros are used to ensure consistent naming */
+/*  conventions for all the different metadata lists. */
+
+#define MKREQMETANAME(name)		p80211meta_ ## req ## _ ## name
+#define MKINDMETANAME(name)		p80211meta_ ## ind ## _ ## name
+#define MKMIBMETANAME(name)		p80211meta_ ## mib ## _ ## name
+#define MKGRPMETANAME(name)		p80211meta_ ## grp ## _ ## name
+
+#define MKREQMETASIZE(name)		p80211meta_ ## req ## _ ## name ## _ ## size
+#define MKINDMETASIZE(name)		p80211meta_ ## ind ## _ ## name ## _ ## size
+#define MKMIBMETASIZE(name)		p80211meta_ ## mib ## _ ## name ## _ ## size
+#define MKGRPMETASIZE(name)		p80211meta_ ## grp ## _ ## name ## _ ## size
+
+#define GETMETASIZE(aptr)		(**((UINT32**)(aptr)))
+
+/*----------------------------------------------------------------*/
+/* The following ifdef depends on the following defines: */
+/*  P80211_NOINCLUDESTRINGS - if defined, all metadata name fields */
+/*                               are empty strings */
+
+#ifdef P80211_NOINCLUDESTRINGS
+	#define	MKITEMNAME(s)	("")
+#else
+	#define	MKITEMNAME(s)	(s)
+#endif
+
+/*================================================================*/
+/* Types */
+
+/*----------------------------------------------------------------*/
+/* The following structure types are used for the metadata */
+/* representation of category list metadata, group list metadata, */
+/* and data item metadata for both Mib and Messages. */
+
+typedef struct p80211meta
+{
+	char			*name;		/* data item name */
+	UINT32			did;		/* partial did */
+	UINT32			flags;		/* set of various flag bits */
+	UINT32			min;		/* min value of a BOUNDEDINT */
+	UINT32			max;		/* max value of a BOUNDEDINT */
+
+	UINT32			maxlen;		/* maxlen of a OCTETSTR or DISPLAYSTR */
+	UINT32			minlen;		/* minlen of a OCTETSTR or DISPLAYSTR */
+	p80211enum_t		*enumptr;	/* ptr to the enum type for ENUMINT */
+	p80211_totext_t		totextptr;	/* ptr to totext conversion function */
+	p80211_fromtext_t	fromtextptr;	/* ptr to totext conversion function */
+	p80211_valid_t		validfunptr;	/* ptr to totext conversion function */
+} p80211meta_t;
+
+typedef struct grplistitem
+{
+	char		*name;
+	p80211meta_t	*itemlist;
+} grplistitem_t;
+
+typedef struct catlistitem
+{
+	char		*name;
+	grplistitem_t	*grplist;
+} catlistitem_t;
+
+/*================================================================*/
+/* Extern Declarations */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Function Declarations */
+
+/*----------------------------------------------------------------*/
+/* */
+UINT32 p80211_text2did(catlistitem_t *catlist, char *catname, char *grpname, char *itemname);
+UINT32 p80211_text2catdid(catlistitem_t *list, char *name );
+UINT32 p80211_text2grpdid(grplistitem_t *list, char *name );
+UINT32 p80211_text2itemdid(p80211meta_t *list, char *name );
+UINT32 p80211_isvalid_did( catlistitem_t *catlist, UINT32 did );
+UINT32 p80211_isvalid_catdid( catlistitem_t *catlist, UINT32 did );
+UINT32 p80211_isvalid_grpdid( catlistitem_t *catlist, UINT32 did );
+UINT32 p80211_isvalid_itemdid( catlistitem_t *catlist, UINT32 did );
+catlistitem_t *p80211_did2cat( catlistitem_t *catlist, UINT32 did );
+grplistitem_t *p80211_did2grp( catlistitem_t *catlist, UINT32 did );
+p80211meta_t *p80211_did2item( catlistitem_t *catlist, UINT32 did );
+UINT32 p80211item_maxdatalen( struct catlistitem *metalist, UINT32 did );
+UINT32 p80211_metaname2did(struct catlistitem *metalist, char *itemname);
+UINT32 p80211item_getoffset( struct catlistitem *metalist, UINT32 did );
+int p80211item_gettype(p80211meta_t *meta);
+
+#endif /* _P80211META_H */
diff --git a/drivers/staging/wlan-ng/p80211metadef.h b/drivers/staging/wlan-ng/p80211metadef.h
new file mode 100644
index 0000000..2c7f435
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211metadef.h
@@ -0,0 +1,2524 @@
+/* This file is GENERATED AUTOMATICALLY.  DO NOT EDIT OR MODIFY.
+* --------------------------------------------------------------------
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _P80211MKMETADEF_H
+#define _P80211MKMETADEF_H
+
+
+#define DIDmsg_cat_dot11req \
+			P80211DID_MKSECTION(1)
+#define DIDmsg_dot11req_mibget \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1))
+#define DIDmsg_dot11req_mibget_mibattribute \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_mibget_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_mibset \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2))
+#define DIDmsg_dot11req_mibset_mibattribute \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_mibset_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_powermgmt \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3))
+#define DIDmsg_dot11req_powermgmt_powermgmtmode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_powermgmt_wakeup \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_powermgmt_receivedtims \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_powermgmt_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_scan \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4))
+#define DIDmsg_dot11req_scan_bsstype \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_scan_bssid \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_scan_ssid \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_scan_scantype \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_scan_probedelay \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_dot11req_scan_channellist \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_dot11req_scan_minchanneltime \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_dot11req_scan_maxchanneltime \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_dot11req_scan_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(9) | 0x00000000)
+#define DIDmsg_dot11req_scan_numbss \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(10) | 0x00000000)
+#define DIDmsg_dot11req_scan_append \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(11) | 0x00000000)
+#define DIDmsg_dot11req_scan_results \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5))
+#define DIDmsg_dot11req_scan_results_bssindex \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_signal \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_noise \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_bssid \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_ssid \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_bsstype \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_beaconperiod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_dtimperiod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(9) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_timestamp \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(10) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_localtime \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(11) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_fhdwelltime \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(12) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_fhhopset \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(13) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_fhhoppattern \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(14) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_fhhopindex \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(15) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_dschannel \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(16) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_cfpcount \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(17) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_cfpperiod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(18) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_cfpmaxduration \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(19) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_cfpdurremaining \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(20) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_ibssatimwindow \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(21) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_cfpollable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(22) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_cfpollreq \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(23) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_privacy \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(24) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(25) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(26) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(27) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(28) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(29) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(30) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate7 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(31) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_basicrate8 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(32) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(33) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(34) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(35) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(36) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(37) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(38) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate7 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(39) | 0x00000000)
+#define DIDmsg_dot11req_scan_results_supprate8 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(40) | 0x00000000)
+#define DIDmsg_dot11req_join \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6))
+#define DIDmsg_dot11req_join_bssid \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_join_joinfailuretimeout \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate7 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(9) | 0x00000000)
+#define DIDmsg_dot11req_join_basicrate8 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(10) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(11) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(12) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(13) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(14) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(15) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(16) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate7 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(17) | 0x00000000)
+#define DIDmsg_dot11req_join_operationalrate8 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(18) | 0x00000000)
+#define DIDmsg_dot11req_join_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(19) | 0x00000000)
+#define DIDmsg_dot11req_authenticate \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(7))
+#define DIDmsg_dot11req_authenticate_peerstaaddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_authenticate_authenticationtype \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_authenticate_authenticationfailuretimeout \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_authenticate_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_deauthenticate \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(8))
+#define DIDmsg_dot11req_deauthenticate_peerstaaddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_deauthenticate_reasoncode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_deauthenticate_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_associate \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9))
+#define DIDmsg_dot11req_associate_peerstaaddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_associate_associatefailuretimeout \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_associate_cfpollable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_associate_cfpollreq \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_associate_privacy \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_dot11req_associate_listeninterval \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_dot11req_associate_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_dot11req_reassociate \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10))
+#define DIDmsg_dot11req_reassociate_newapaddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_reassociate_reassociatefailuretimeout \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_reassociate_cfpollable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_reassociate_cfpollreq \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_reassociate_privacy \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_dot11req_reassociate_listeninterval \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_dot11req_reassociate_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_dot11req_disassociate \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(11))
+#define DIDmsg_dot11req_disassociate_peerstaaddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_disassociate_reasoncode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_disassociate_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_reset \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(12))
+#define DIDmsg_dot11req_reset_setdefaultmib \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_reset_macaddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_reset_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_start \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13))
+#define DIDmsg_dot11req_start_ssid \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_start_bsstype \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11req_start_beaconperiod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11req_start_dtimperiod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_dot11req_start_cfpperiod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_dot11req_start_cfpmaxduration \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_dot11req_start_fhdwelltime \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_dot11req_start_fhhopset \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_dot11req_start_fhhoppattern \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(9) | 0x00000000)
+#define DIDmsg_dot11req_start_dschannel \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(10) | 0x00000000)
+#define DIDmsg_dot11req_start_ibssatimwindow \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(11) | 0x00000000)
+#define DIDmsg_dot11req_start_probedelay \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(12) | 0x00000000)
+#define DIDmsg_dot11req_start_cfpollable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(13) | 0x00000000)
+#define DIDmsg_dot11req_start_cfpollreq \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(14) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(15) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(16) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(17) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(18) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(19) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(20) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate7 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(21) | 0x00000000)
+#define DIDmsg_dot11req_start_basicrate8 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(22) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(23) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(24) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(25) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(26) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(27) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(28) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate7 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(29) | 0x00000000)
+#define DIDmsg_dot11req_start_operationalrate8 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(30) | 0x00000000)
+#define DIDmsg_dot11req_start_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(31) | 0x00000000)
+#define DIDmsg_cat_dot11ind \
+			P80211DID_MKSECTION(2)
+#define DIDmsg_dot11ind_authenticate \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1))
+#define DIDmsg_dot11ind_authenticate_peerstaaddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11ind_authenticate_authenticationtype \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11ind_deauthenticate \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2))
+#define DIDmsg_dot11ind_deauthenticate_peerstaaddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11ind_deauthenticate_reasoncode \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11ind_associate \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3))
+#define DIDmsg_dot11ind_associate_peerstaaddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11ind_associate_aid \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11ind_reassociate \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(4))
+#define DIDmsg_dot11ind_reassociate_peerstaaddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11ind_reassociate_aid \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_dot11ind_reassociate_oldapaddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_dot11ind_disassociate \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(5))
+#define DIDmsg_dot11ind_disassociate_peerstaaddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11ind_disassociate_reasoncode \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_cat_lnxreq \
+			P80211DID_MKSECTION(3)
+#define DIDmsg_lnxreq_ifstate \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1))
+#define DIDmsg_lnxreq_ifstate_ifstate \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_lnxreq_ifstate_resultcode \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2))
+#define DIDmsg_lnxreq_wlansniff_enable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_channel \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_prismheader \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_wlanheader \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_keepwepflags \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_stripfcs \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_packet_trunc \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_lnxreq_wlansniff_resultcode \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_lnxreq_hostwep \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3))
+#define DIDmsg_lnxreq_hostwep_resultcode \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_lnxreq_hostwep_decrypt \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_lnxreq_hostwep_encrypt \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_lnxreq_commsquality \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4))
+#define DIDmsg_lnxreq_commsquality_resultcode \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_lnxreq_commsquality_dbm \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_lnxreq_commsquality_link \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_lnxreq_commsquality_level \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_lnxreq_commsquality_noise \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_lnxreq_autojoin \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5))
+#define DIDmsg_lnxreq_autojoin_ssid \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_lnxreq_autojoin_authtype \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_lnxreq_autojoin_resultcode \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_cat_lnxind \
+			P80211DID_MKSECTION(4)
+#define DIDmsg_lnxind_wlansniffrm \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1))
+#define DIDmsg_lnxind_wlansniffrm_hosttime \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_mactime \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_channel \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_rssi \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_sq \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_signal \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_noise \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_rate \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_istx \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(9) | 0x00000000)
+#define DIDmsg_lnxind_wlansniffrm_frmlen \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(10) | 0x00000000)
+#define DIDmsg_lnxind_roam \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(2))
+#define DIDmsg_lnxind_roam_reason \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_cat_p2req \
+			P80211DID_MKSECTION(5)
+#define DIDmsg_p2req_join \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1))
+#define DIDmsg_p2req_join_bssid \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate7 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_p2req_join_basicrate8 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(9) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(10) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(11) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(12) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(13) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(14) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(15) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate7 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(16) | 0x00000000)
+#define DIDmsg_p2req_join_operationalrate8 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(17) | 0x00000000)
+#define DIDmsg_p2req_join_ssid \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(18) | 0x00000000)
+#define DIDmsg_p2req_join_channel \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(19) | 0x00000000)
+#define DIDmsg_p2req_join_authtype \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(20) | 0x00000000)
+#define DIDmsg_p2req_join_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(21) | 0x00000000)
+#define DIDmsg_p2req_readpda \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2))
+#define DIDmsg_p2req_readpda_pda \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_readpda_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_readcis \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3))
+#define DIDmsg_p2req_readcis_cis \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_readcis_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_auxport_state \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(4))
+#define DIDmsg_p2req_auxport_state_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_auxport_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_auxport_read \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5))
+#define DIDmsg_p2req_auxport_read_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_auxport_read_len \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_auxport_read_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_auxport_read_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_auxport_write \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6))
+#define DIDmsg_p2req_auxport_write_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_auxport_write_len \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_auxport_write_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_auxport_write_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_low_level \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7))
+#define DIDmsg_p2req_low_level_command \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_low_level_param0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_low_level_param1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_low_level_param2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_low_level_resp0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_p2req_low_level_resp1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_p2req_low_level_resp2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_p2req_low_level_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(8) | 0x00000000)
+#define DIDmsg_p2req_test_command \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8))
+#define DIDmsg_p2req_test_command_testcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_test_command_testparam \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_test_command_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_test_command_status \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_test_command_resp0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_p2req_test_command_resp1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_p2req_test_command_resp2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(7) | 0x00000000)
+#define DIDmsg_p2req_mmi_read \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(9))
+#define DIDmsg_p2req_mmi_read_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_mmi_read_value \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_mmi_read_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_mmi_write \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(10))
+#define DIDmsg_p2req_mmi_write_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_mmi_write_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_mmi_write_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11))
+#define DIDmsg_p2req_ramdl_state_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state_exeaddr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12))
+#define DIDmsg_p2req_ramdl_write_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_len \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_flashdl_state \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(13))
+#define DIDmsg_p2req_flashdl_state_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_flashdl_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(13) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_flashdl_write \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(14))
+#define DIDmsg_p2req_flashdl_write_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(14) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_flashdl_write_len \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(14) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_flashdl_write_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(14) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_flashdl_write_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(14) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_mm_state \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(15))
+#define DIDmsg_p2req_mm_state_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(15) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_mm_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(15) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_dump_state \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(16))
+#define DIDmsg_p2req_dump_state_level \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(16) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_dump_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(16) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_channel_info \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(17))
+#define DIDmsg_p2req_channel_info_channellist \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(17) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_channel_info_channeldwelltime \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(17) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_channel_info_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(17) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_channel_info_numchinfo \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(17) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_channel_info_results \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18))
+#define DIDmsg_p2req_channel_info_results_channel \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_channel_info_results_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_channel_info_results_avgnoiselevel \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_channel_info_results_peaknoiselevel \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18) | \
+			P80211DID_MKITEM(4) | 0x00000000)
+#define DIDmsg_p2req_channel_info_results_bssactive \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18) | \
+			P80211DID_MKITEM(5) | 0x00000000)
+#define DIDmsg_p2req_channel_info_results_pcfactive \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(18) | \
+			P80211DID_MKITEM(6) | 0x00000000)
+#define DIDmsg_p2req_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(19))
+#define DIDmsg_p2req_enable_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(19) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmib_cat_dot11smt \
+			P80211DID_MKSECTION(1)
+#define DIDmib_dot11smt_p80211Table \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1))
+#define DIDmib_dot11smt_p80211Table_p80211_ifstate \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2))
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11StationID \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11MediumOccupancyLimit \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11CFPollable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11CFPPeriod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11CFPMaxDuration \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(5) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11AuthenticationResponseTimeOut \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(6) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11PrivacyOptionImplemented \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11PowerManagementMode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(8) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DesiredSSID \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(9) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DesiredBSSType \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(10) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11OperationalRateSet \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(11) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11BeaconPeriod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(12) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DTIMPeriod \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(13) | 0x18000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11AssociationResponseTimeOut \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(14) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DisassociateReason \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(15) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DisassociateStation \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(16) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DeauthenticateReason \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(17) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11DeauthenticateStation \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(18) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11AuthenticateFailStatus \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(19) | 0x10000000)
+#define DIDmib_dot11smt_dot11StationConfigTable_dot11AuthenticateFailStation \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(20) | 0x10000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3))
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x14000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x1c000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(3) | 0x14000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(4) | 0x1c000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(5) | 0x14000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(6) | 0x1c000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(7) | 0x14000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable4 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(8) | 0x1c000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(9) | 0x14000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable5 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(10) | 0x1c000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(11) | 0x14000000)
+#define DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable6 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(12) | 0x1c000000)
+#define DIDmib_dot11smt_dot11WEPDefaultKeysTable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4))
+#define DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x0c000000)
+#define DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(2) | 0x0c000000)
+#define DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(3) | 0x0c000000)
+#define DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3 \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(4) | 0x0c000000)
+#define DIDmib_dot11smt_dot11WEPKeyMappingsTable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5))
+#define DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingIndex \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x1c000000)
+#define DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingAddress \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x1c000000)
+#define DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingWEPOn \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(3) | 0x1c000000)
+#define DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingValue \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(4) | 0x1c000000)
+#define DIDmib_dot11smt_dot11PrivacyTable \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6))
+#define DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_dot11smt_dot11PrivacyTable_dot11WEPKeyMappingLength \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(3) | 0x18000000)
+#define DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_dot11smt_dot11PrivacyTable_dot11WEPICVErrorCount \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_dot11smt_dot11PrivacyTable_dot11WEPExcludedCount \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_cat_dot11mac \
+			P80211DID_MKSECTION(2)
+#define DIDmib_dot11mac_dot11OperationTable \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1))
+#define DIDmib_dot11mac_dot11OperationTable_dot11MACAddress \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(5) | 0x18000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11MaxReceiveLifetime \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11ManufacturerID \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(8) | 0x10000000)
+#define DIDmib_dot11mac_dot11OperationTable_dot11ProductID \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(9) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2))
+#define DIDmib_dot11mac_dot11CountersTable_dot11TransmittedFragmentCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11MulticastTransmittedFrameCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11FailedCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11RetryCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11MultipleRetryCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11FrameDuplicateCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11RTSSuccessCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11RTSFailureCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(8) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11ACKFailureCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(9) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11ReceivedFragmentCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(10) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11MulticastReceivedFrameCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(11) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11FCSErrorCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(12) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11TransmittedFrameCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(13) | 0x10000000)
+#define DIDmib_dot11mac_dot11CountersTable_dot11WEPUndecryptableCount \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(14) | 0x10000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3))
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address1 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address2 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address3 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(3) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address4 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(4) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address5 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(5) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address6 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(6) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address7 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(7) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address8 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(8) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address9 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(9) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address10 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(10) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address11 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(11) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address12 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(12) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address13 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(13) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address14 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(14) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address15 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(15) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address16 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(16) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address17 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(17) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address18 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(18) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address19 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(19) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address20 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(20) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address21 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(21) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address22 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(22) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address23 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(23) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address24 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(24) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address25 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(25) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address26 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(26) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address27 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(27) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address28 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(28) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address29 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(29) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address30 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(30) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address31 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(31) | 0x1c000000)
+#define DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address32 \
+			(P80211DID_MKSECTION(2) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(32) | 0x1c000000)
+#define DIDmib_cat_dot11phy \
+			P80211DID_MKSECTION(3)
+#define DIDmib_dot11phy_dot11PhyOperationTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1))
+#define DIDmib_dot11phy_dot11PhyOperationTable_dot11PHYType \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyOperationTable_dot11CurrentRegDomain \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyOperationTable_dot11TempType \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyOperationTable_dot11ChannelAgilityPresent \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyOperationTable_dot11ChannelAgilityEnabled \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyOperationTable_dot11ShortPreambleEnabled \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyAntennaTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2))
+#define DIDmib_dot11phy_dot11PhyAntennaTable_dot11CurrentTxAntenna \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyAntennaTable_dot11DiversitySupport \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyAntennaTable_dot11CurrentRxAntenna \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(3) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3))
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11NumberSupportedPowerLevels \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel1 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel2 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel3 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel4 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel5 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel6 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel7 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(8) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel8 \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(9) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(10) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4))
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11HopTime \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentChannelNumber \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11MaxDwellTime \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentDwellTime \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentSet \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(5) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentPattern \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(6) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentIndex \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(7) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyDSSSTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5))
+#define DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyDSSSTable_dot11CCAModeSupported \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentCCAMode \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyDSSSTable_dot11EDThreshold \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyDSSSTable_dot11ShortPreambleOptionImplemented \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyDSSSTable_dot11PBCCOptionImplemented \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_dot11phy_dot11PhyIRTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(6))
+#define DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogTimerMax \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogCountMax \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogTimerMin \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(3) | 0x18000000)
+#define DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogCountMin \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_dot11phy_dot11RegDomainsSupportedTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(7))
+#define DIDmib_dot11phy_dot11RegDomainsSupportedTable_dot11RegDomainsSupportIndex \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(1) | 0x1c000000)
+#define DIDmib_dot11phy_dot11RegDomainsSupportedTable_dot11RegDomainsSupportValue \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(2) | 0x14000000)
+#define DIDmib_dot11phy_dot11AntennasListTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(8))
+#define DIDmib_dot11phy_dot11AntennasListTable_dot11AntennaListIndex \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(1) | 0x1c000000)
+#define DIDmib_dot11phy_dot11AntennasListTable_dot11SupportedTxAntenna \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(2) | 0x1c000000)
+#define DIDmib_dot11phy_dot11AntennasListTable_dot11SupportedRxAntenna \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(3) | 0x1c000000)
+#define DIDmib_dot11phy_dot11AntennasListTable_dot11DiversitySelectionRx \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(8) | \
+			P80211DID_MKITEM(4) | 0x1c000000)
+#define DIDmib_dot11phy_dot11SupportedDataRatesTxTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(9))
+#define DIDmib_dot11phy_dot11SupportedDataRatesTxTable_dot11SupportedDataRatesTxIndex \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(1) | 0x1c000000)
+#define DIDmib_dot11phy_dot11SupportedDataRatesTxTable_dot11SupportedDataRatesTxValue \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(9) | \
+			P80211DID_MKITEM(2) | 0x14000000)
+#define DIDmib_dot11phy_dot11SupportedDataRatesRxTable \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(10))
+#define DIDmib_dot11phy_dot11SupportedDataRatesRxTable_dot11SupportedDataRatesRxIndex \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(1) | 0x1c000000)
+#define DIDmib_dot11phy_dot11SupportedDataRatesRxTable_dot11SupportedDataRatesRxValue \
+			(P80211DID_MKSECTION(3) | \
+			P80211DID_MKGROUP(10) | \
+			P80211DID_MKITEM(2) | 0x14000000)
+#define DIDmib_cat_lnx \
+			P80211DID_MKSECTION(4)
+#define DIDmib_lnx_lnxConfigTable \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1))
+#define DIDmib_lnx_lnxConfigTable_lnxRSNAIE \
+			(P80211DID_MKSECTION(4) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_cat_p2 \
+			P80211DID_MKSECTION(5)
+#define DIDmib_p2_p2Table \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1))
+#define DIDmib_p2_p2Table_p2MMTx \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_p2_p2Table_p2EarlyBeacon \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_p2_p2Table_p2ReceivedFrameStatistics \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_p2_p2Table_p2CommunicationTallies \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_p2_p2Table_p2Authenticated \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_p2_p2Table_p2Associated \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_p2_p2Table_p2PowerSaveUserCount \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_p2_p2Table_p2Comment \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(8) | 0x18000000)
+#define DIDmib_p2_p2Table_p2AccessMode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(9) | 0x18000000)
+#define DIDmib_p2_p2Table_p2AccessAllow \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(10) | 0x18000000)
+#define DIDmib_p2_p2Table_p2AccessDeny \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(11) | 0x18000000)
+#define DIDmib_p2_p2Table_p2ChannelInfoResults \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(12) | 0x10000000)
+#define DIDmib_p2_p2Static \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2))
+#define DIDmib_p2_p2Static_p2CnfPortType \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfOwnMACAddress \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfDesiredSSID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(3) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfOwnChannel \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfOwnSSID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(5) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfOwnATIMWindow \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(6) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfSystemScale \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(7) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfMaxDataLength \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(8) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(9) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfPMEnabled \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(10) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfPMEPS \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(11) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfMulticastReceive \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(12) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfMaxSleepDuration \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(13) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfPMHoldoverDuration \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(14) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfOwnName \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(15) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfOwnDTIMPeriod \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(16) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(17) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(18) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(19) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(20) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(21) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWDSAddress6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(22) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfMulticastPMBuffering \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(23) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWEPDefaultKeyID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(24) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfWEPDefaultKey0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(25) | 0x08000000)
+#define DIDmib_p2_p2Static_p2CnfWEPDefaultKey1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(26) | 0x08000000)
+#define DIDmib_p2_p2Static_p2CnfWEPDefaultKey2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(27) | 0x08000000)
+#define DIDmib_p2_p2Static_p2CnfWEPDefaultKey3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(28) | 0x08000000)
+#define DIDmib_p2_p2Static_p2CnfWEPFlags \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(29) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfAuthentication \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(30) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfMaxAssociatedStations \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(31) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfTxControl \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(32) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfRoamingMode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(33) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfHostAuthentication \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(34) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfRcvCrcError \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(35) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfAltRetryCount \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(36) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfBeaconInterval \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(37) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfMediumOccupancyLimit \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(38) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfCFPPeriod \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(39) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfCFPMaxDuration \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(40) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfCFPFlags \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(41) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfSTAPCFInfo \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(42) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfPriorityQUsage \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(43) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfTIMCtrl \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(44) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfThirty2Tally \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(45) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfEnhSecurity \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(46) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfShortPreamble \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(47) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfExcludeLongPreamble \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(48) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfAuthenticationRspTO \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(49) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfBasicRates \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(50) | 0x18000000)
+#define DIDmib_p2_p2Static_p2CnfSupportedRates \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(51) | 0x18000000)
+#define DIDmib_p2_p2Dynamic \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3))
+#define DIDmib_p2_p2Dynamic_p2CreateIBSS \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(2) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(3) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(4) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2PromiscuousMode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(5) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(6) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(7) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(8) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(9) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(10) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(11) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2FragmentationThreshold6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(12) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(13) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(14) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(15) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(16) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(17) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(18) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2RTSThreshold6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(19) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl0 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(20) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(21) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(22) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(23) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(24) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(25) | 0x18000000)
+#define DIDmib_p2_p2Dynamic_p2TxRateControl6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(3) | \
+			P80211DID_MKITEM(26) | 0x18000000)
+#define DIDmib_p2_p2Behavior \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(4))
+#define DIDmib_p2_p2Behavior_p2TickTime \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(4) | \
+			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_p2_p2NIC \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5))
+#define DIDmib_p2_p2NIC_p2MaxLoadTime \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2DLBufferPage \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2DLBufferOffset \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2DLBufferLength \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2PRIIdentity \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2PRISupRange \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2CFIActRanges \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2NICSerialNumber \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(8) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2NICIdentity \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(9) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2MFISupRange \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(10) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2CFISupRange \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(11) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2ChannelList \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(12) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2RegulatoryDomains \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(13) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2TempType \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(14) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2STAIdentity \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(15) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2STASupRange \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(16) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2MFIActRanges \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(17) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2STACFIActRanges \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(18) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2BuildSequence \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(19) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2PrimaryFWID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(20) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2SecondaryFWID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(21) | 0x10000000)
+#define DIDmib_p2_p2NIC_p2TertiaryFWID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(22) | 0x10000000)
+#define DIDmib_p2_p2MAC \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6))
+#define DIDmib_p2_p2MAC_p2PortStatus \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentSSID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentBSSID \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CommsQuality \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CommsQualityCQ \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CommsQualityASL \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(6) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CommsQualityANL \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(7) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2dbmCommsQuality \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(8) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2dbmCommsQualityCQ \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(9) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2dbmCommsQualityASL \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(10) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2dbmCommsQualityANL \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(11) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(12) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentBeaconInterval \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(13) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2StaCurrentScaleThresholds \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(14) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2APCurrentScaleThresholds \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(15) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2ProtocolRspTime \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(16) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2ShortRetryLimit \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(17) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2LongRetryLimit \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(18) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2MaxTransmitLifetime \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(19) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2MaxReceiveLifetime \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(20) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CFPollable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(21) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2AuthenticationAlgorithms \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(22) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2PrivacyOptionImplemented \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(23) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate1 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(24) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate2 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(25) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate3 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(26) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate4 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(27) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate5 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(28) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2CurrentTxRate6 \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(29) | 0x10000000)
+#define DIDmib_p2_p2MAC_p2OwnMACAddress \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(6) | \
+			P80211DID_MKITEM(30) | 0x10000000)
+#define DIDmib_p2_p2Modem \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7))
+#define DIDmib_p2_p2Modem_p2PHYType \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(1) | 0x10000000)
+#define DIDmib_p2_p2Modem_p2CurrentChannel \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(2) | 0x10000000)
+#define DIDmib_p2_p2Modem_p2CurrentPowerState \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(3) | 0x10000000)
+#define DIDmib_p2_p2Modem_p2CCAMode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(4) | 0x10000000)
+#define DIDmib_p2_p2Modem_p2SupportedDataRates \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(5) | 0x10000000)
+#define DIDmib_p2_p2Modem_p2TxPowerMax \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(7) | \
+			P80211DID_MKITEM(6) | 0x18000000)
+#endif
diff --git a/drivers/staging/wlan-ng/p80211metamib.h b/drivers/staging/wlan-ng/p80211metamib.h
new file mode 100644
index 0000000..19867fd
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211metamib.h
@@ -0,0 +1,105 @@
+/* p80211metamib.h
+*
+* Macros, const, types, and funcs for p80211 mib metadata
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares some of the constants and types used in various
+* parts of the linux-wlan system.
+*
+* Notes:
+*   - Constant values are always in HOST byte order.
+*
+* All functions and statics declared here are implemented in p80211types.c
+*   --------------------------------------------------------------------
+*/
+
+#ifndef _P80211METAMIB_H
+#define _P80211METAMIB_H
+
+/*================================================================*/
+/* System Includes */
+
+/*================================================================*/
+/* Project Includes */
+
+#ifndef _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+/*================================================================*/
+/* Constants */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Macros */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Types */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Extern Declarations */
+
+/*----------------------------------------------------------------*/
+/* The following is the external declaration for the mib */
+/* category metadata list */
+
+extern catlistitem_t mib_catlist[];
+extern UINT32 mib_catlist_size;
+
+
+/*================================================================*/
+/* Function Declarations */
+
+/*----------------------------------------------------------------*/
+/* */
+
+#endif /* _P80211METAMIB_H */
diff --git a/drivers/staging/wlan-ng/p80211metamsg.h b/drivers/staging/wlan-ng/p80211metamsg.h
new file mode 100644
index 0000000..4d6dfcc
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211metamsg.h
@@ -0,0 +1,105 @@
+/* p80211metamsg.h
+*
+* Macros, const, types, and funcs for p80211 msg metadata
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares some of the constants and types used in various
+* parts of the linux-wlan system.
+*
+* Notes:
+*   - Constant values are always in HOST byte order.
+*
+* All functions and statics declared here are implemented in p80211types.c
+*   --------------------------------------------------------------------
+*/
+
+#ifndef _P80211METAMSG_H
+#define _P80211METAMSG_H
+
+/*================================================================*/
+/* System Includes */
+
+/*================================================================*/
+/* Project Includes */
+
+#ifndef _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+/*================================================================*/
+/* Constants */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Macros */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Types */
+
+/*----------------------------------------------------------------*/
+/* */
+
+/*================================================================*/
+/* Extern Declarations */
+
+/*----------------------------------------------------------------*/
+/* The following is the external declaration for the message */
+/* category metadata list */
+
+extern catlistitem_t msg_catlist[];
+extern UINT32 msg_catlist_size;
+
+
+/*================================================================*/
+/* Function Declarations */
+
+/*----------------------------------------------------------------*/
+/* */
+
+#endif /* _P80211METAMSG_H */
diff --git a/drivers/staging/wlan-ng/p80211metastruct.h b/drivers/staging/wlan-ng/p80211metastruct.h
new file mode 100644
index 0000000..715f4b2
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211metastruct.h
@@ -0,0 +1,644 @@
+/* This file is GENERATED AUTOMATICALLY.  DO NOT EDIT OR MODIFY.
+* --------------------------------------------------------------------
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _P80211MKMETASTRUCT_H
+#define _P80211MKMETASTRUCT_H
+
+
+typedef struct p80211msg_dot11req_mibget
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_unk392_t	mibattribute	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_mibget_t;
+
+typedef struct p80211msg_dot11req_mibset
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_unk392_t	mibattribute	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_mibset_t;
+
+typedef struct p80211msg_dot11req_powermgmt
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	powermgmtmode	;
+	p80211item_uint32_t	wakeup	;
+	p80211item_uint32_t	receivedtims	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_powermgmt_t;
+
+typedef struct p80211msg_dot11req_scan
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	bsstype	;
+	p80211item_pstr6_t	bssid	;
+	UINT8	pad_0C[1]	;
+	p80211item_pstr32_t	ssid	;
+	UINT8	pad_1D[3]	;
+	p80211item_uint32_t	scantype	;
+	p80211item_uint32_t	probedelay	;
+	p80211item_pstr14_t	channellist	;
+	UINT8	pad_2C[1]	;
+	p80211item_uint32_t	minchanneltime	;
+	p80211item_uint32_t	maxchanneltime	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	numbss	;
+	p80211item_uint32_t	append	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_scan_t;
+
+typedef struct p80211msg_dot11req_scan_results
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	bssindex	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	signal	;
+	p80211item_uint32_t	noise	;
+	p80211item_pstr6_t	bssid	;
+	UINT8	pad_3C[1]	;
+	p80211item_pstr32_t	ssid	;
+	UINT8	pad_4D[3]	;
+	p80211item_uint32_t	bsstype	;
+	p80211item_uint32_t	beaconperiod	;
+	p80211item_uint32_t	dtimperiod	;
+	p80211item_uint32_t	timestamp	;
+	p80211item_uint32_t	localtime	;
+	p80211item_uint32_t	fhdwelltime	;
+	p80211item_uint32_t	fhhopset	;
+	p80211item_uint32_t	fhhoppattern	;
+	p80211item_uint32_t	fhhopindex	;
+	p80211item_uint32_t	dschannel	;
+	p80211item_uint32_t	cfpcount	;
+	p80211item_uint32_t	cfpperiod	;
+	p80211item_uint32_t	cfpmaxduration	;
+	p80211item_uint32_t	cfpdurremaining	;
+	p80211item_uint32_t	ibssatimwindow	;
+	p80211item_uint32_t	cfpollable	;
+	p80211item_uint32_t	cfpollreq	;
+	p80211item_uint32_t	privacy	;
+	p80211item_uint32_t	basicrate1	;
+	p80211item_uint32_t	basicrate2	;
+	p80211item_uint32_t	basicrate3	;
+	p80211item_uint32_t	basicrate4	;
+	p80211item_uint32_t	basicrate5	;
+	p80211item_uint32_t	basicrate6	;
+	p80211item_uint32_t	basicrate7	;
+	p80211item_uint32_t	basicrate8	;
+	p80211item_uint32_t	supprate1	;
+	p80211item_uint32_t	supprate2	;
+	p80211item_uint32_t	supprate3	;
+	p80211item_uint32_t	supprate4	;
+	p80211item_uint32_t	supprate5	;
+	p80211item_uint32_t	supprate6	;
+	p80211item_uint32_t	supprate7	;
+	p80211item_uint32_t	supprate8	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_scan_results_t;
+
+typedef struct p80211msg_dot11req_join
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	bssid	;
+	UINT8	pad_5C[1]	;
+	p80211item_uint32_t	joinfailuretimeout	;
+	p80211item_uint32_t	basicrate1	;
+	p80211item_uint32_t	basicrate2	;
+	p80211item_uint32_t	basicrate3	;
+	p80211item_uint32_t	basicrate4	;
+	p80211item_uint32_t	basicrate5	;
+	p80211item_uint32_t	basicrate6	;
+	p80211item_uint32_t	basicrate7	;
+	p80211item_uint32_t	basicrate8	;
+	p80211item_uint32_t	operationalrate1	;
+	p80211item_uint32_t	operationalrate2	;
+	p80211item_uint32_t	operationalrate3	;
+	p80211item_uint32_t	operationalrate4	;
+	p80211item_uint32_t	operationalrate5	;
+	p80211item_uint32_t	operationalrate6	;
+	p80211item_uint32_t	operationalrate7	;
+	p80211item_uint32_t	operationalrate8	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_join_t;
+
+typedef struct p80211msg_dot11req_authenticate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_6C[1]	;
+	p80211item_uint32_t	authenticationtype	;
+	p80211item_uint32_t	authenticationfailuretimeout	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_authenticate_t;
+
+typedef struct p80211msg_dot11req_deauthenticate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_7C[1]	;
+	p80211item_uint32_t	reasoncode	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_deauthenticate_t;
+
+typedef struct p80211msg_dot11req_associate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_8C[1]	;
+	p80211item_uint32_t	associatefailuretimeout	;
+	p80211item_uint32_t	cfpollable	;
+	p80211item_uint32_t	cfpollreq	;
+	p80211item_uint32_t	privacy	;
+	p80211item_uint32_t	listeninterval	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_associate_t;
+
+typedef struct p80211msg_dot11req_reassociate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	newapaddress	;
+	UINT8	pad_9C[1]	;
+	p80211item_uint32_t	reassociatefailuretimeout	;
+	p80211item_uint32_t	cfpollable	;
+	p80211item_uint32_t	cfpollreq	;
+	p80211item_uint32_t	privacy	;
+	p80211item_uint32_t	listeninterval	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_reassociate_t;
+
+typedef struct p80211msg_dot11req_disassociate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_10C[1]	;
+	p80211item_uint32_t	reasoncode	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_disassociate_t;
+
+typedef struct p80211msg_dot11req_reset
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	setdefaultmib	;
+	p80211item_pstr6_t	macaddress	;
+	UINT8	pad_11C[1]	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_reset_t;
+
+typedef struct p80211msg_dot11req_start
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr32_t	ssid	;
+	UINT8	pad_12D[3]	;
+	p80211item_uint32_t	bsstype	;
+	p80211item_uint32_t	beaconperiod	;
+	p80211item_uint32_t	dtimperiod	;
+	p80211item_uint32_t	cfpperiod	;
+	p80211item_uint32_t	cfpmaxduration	;
+	p80211item_uint32_t	fhdwelltime	;
+	p80211item_uint32_t	fhhopset	;
+	p80211item_uint32_t	fhhoppattern	;
+	p80211item_uint32_t	dschannel	;
+	p80211item_uint32_t	ibssatimwindow	;
+	p80211item_uint32_t	probedelay	;
+	p80211item_uint32_t	cfpollable	;
+	p80211item_uint32_t	cfpollreq	;
+	p80211item_uint32_t	basicrate1	;
+	p80211item_uint32_t	basicrate2	;
+	p80211item_uint32_t	basicrate3	;
+	p80211item_uint32_t	basicrate4	;
+	p80211item_uint32_t	basicrate5	;
+	p80211item_uint32_t	basicrate6	;
+	p80211item_uint32_t	basicrate7	;
+	p80211item_uint32_t	basicrate8	;
+	p80211item_uint32_t	operationalrate1	;
+	p80211item_uint32_t	operationalrate2	;
+	p80211item_uint32_t	operationalrate3	;
+	p80211item_uint32_t	operationalrate4	;
+	p80211item_uint32_t	operationalrate5	;
+	p80211item_uint32_t	operationalrate6	;
+	p80211item_uint32_t	operationalrate7	;
+	p80211item_uint32_t	operationalrate8	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11req_start_t;
+
+typedef struct p80211msg_dot11ind_authenticate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_13C[1]	;
+	p80211item_uint32_t	authenticationtype	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11ind_authenticate_t;
+
+typedef struct p80211msg_dot11ind_deauthenticate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_14C[1]	;
+	p80211item_uint32_t	reasoncode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11ind_deauthenticate_t;
+
+typedef struct p80211msg_dot11ind_associate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_15C[1]	;
+	p80211item_uint32_t	aid	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11ind_associate_t;
+
+typedef struct p80211msg_dot11ind_reassociate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_16C[1]	;
+	p80211item_uint32_t	aid	;
+	p80211item_pstr6_t	oldapaddress	;
+	UINT8	pad_17C[1]	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11ind_reassociate_t;
+
+typedef struct p80211msg_dot11ind_disassociate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	peerstaaddress	;
+	UINT8	pad_18C[1]	;
+	p80211item_uint32_t	reasoncode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_dot11ind_disassociate_t;
+
+typedef struct p80211msg_lnxreq_ifstate
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	ifstate	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxreq_ifstate_t;
+
+typedef struct p80211msg_lnxreq_wlansniff
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	enable	;
+	p80211item_uint32_t	channel	;
+	p80211item_uint32_t	prismheader	;
+	p80211item_uint32_t	wlanheader	;
+	p80211item_uint32_t	keepwepflags	;
+	p80211item_uint32_t	stripfcs	;
+	p80211item_uint32_t	packet_trunc	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxreq_wlansniff_t;
+
+typedef struct p80211msg_lnxreq_hostwep
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	decrypt	;
+	p80211item_uint32_t	encrypt	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxreq_hostwep_t;
+
+typedef struct p80211msg_lnxreq_commsquality
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	dbm	;
+	p80211item_uint32_t	link	;
+	p80211item_uint32_t	level	;
+	p80211item_uint32_t	noise	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxreq_commsquality_t;
+
+typedef struct p80211msg_lnxreq_autojoin
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr32_t	ssid	;
+	UINT8	pad_19D[3]	;
+	p80211item_uint32_t	authtype	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxreq_autojoin_t;
+
+typedef struct p80211msg_lnxind_wlansniffrm
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	hosttime	;
+	p80211item_uint32_t	mactime	;
+	p80211item_uint32_t	channel	;
+	p80211item_uint32_t	rssi	;
+	p80211item_uint32_t	sq	;
+	p80211item_uint32_t	signal	;
+	p80211item_uint32_t	noise	;
+	p80211item_uint32_t	rate	;
+	p80211item_uint32_t	istx	;
+	p80211item_uint32_t	frmlen	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxind_wlansniffrm_t;
+
+typedef struct p80211msg_lnxind_roam
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	reason	;
+} __WLAN_ATTRIB_PACK__ p80211msg_lnxind_roam_t;
+
+typedef struct p80211msg_p2req_join
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_pstr6_t	bssid	;
+	UINT8	pad_20C[1]	;
+	p80211item_uint32_t	basicrate1	;
+	p80211item_uint32_t	basicrate2	;
+	p80211item_uint32_t	basicrate3	;
+	p80211item_uint32_t	basicrate4	;
+	p80211item_uint32_t	basicrate5	;
+	p80211item_uint32_t	basicrate6	;
+	p80211item_uint32_t	basicrate7	;
+	p80211item_uint32_t	basicrate8	;
+	p80211item_uint32_t	operationalrate1	;
+	p80211item_uint32_t	operationalrate2	;
+	p80211item_uint32_t	operationalrate3	;
+	p80211item_uint32_t	operationalrate4	;
+	p80211item_uint32_t	operationalrate5	;
+	p80211item_uint32_t	operationalrate6	;
+	p80211item_uint32_t	operationalrate7	;
+	p80211item_uint32_t	operationalrate8	;
+	p80211item_pstr32_t	ssid	;
+	UINT8	pad_21D[3]	;
+	p80211item_uint32_t	channel	;
+	p80211item_uint32_t	authtype	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_join_t;
+
+typedef struct p80211msg_p2req_readpda
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_unk1024_t	pda	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_readpda_t;
+
+typedef struct p80211msg_p2req_readcis
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_unk1024_t	cis	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_readcis_t;
+
+typedef struct p80211msg_p2req_auxport_state
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	enable	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_auxport_state_t;
+
+typedef struct p80211msg_p2req_auxport_read
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	addr	;
+	p80211item_uint32_t	len	;
+	p80211item_unk1024_t	data	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_auxport_read_t;
+
+typedef struct p80211msg_p2req_auxport_write
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	addr	;
+	p80211item_uint32_t	len	;
+	p80211item_unk1024_t	data	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_auxport_write_t;
+
+typedef struct p80211msg_p2req_low_level
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	command	;
+	p80211item_uint32_t	param0	;
+	p80211item_uint32_t	param1	;
+	p80211item_uint32_t	param2	;
+	p80211item_uint32_t	resp0	;
+	p80211item_uint32_t	resp1	;
+	p80211item_uint32_t	resp2	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_low_level_t;
+
+typedef struct p80211msg_p2req_test_command
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	testcode	;
+	p80211item_uint32_t	testparam	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	status	;
+	p80211item_uint32_t	resp0	;
+	p80211item_uint32_t	resp1	;
+	p80211item_uint32_t	resp2	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_test_command_t;
+
+typedef struct p80211msg_p2req_mmi_read
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	addr	;
+	p80211item_uint32_t	value	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_mmi_read_t;
+
+typedef struct p80211msg_p2req_mmi_write
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	addr	;
+	p80211item_uint32_t	data	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_mmi_write_t;
+
+typedef struct p80211msg_p2req_ramdl_state
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	enable	;
+	p80211item_uint32_t	exeaddr	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_ramdl_state_t;
+
+typedef struct p80211msg_p2req_ramdl_write
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	addr	;
+	p80211item_uint32_t	len	;
+	p80211item_unk4096_t	data	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_ramdl_write_t;
+
+typedef struct p80211msg_p2req_flashdl_state
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	enable	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_flashdl_state_t;
+
+typedef struct p80211msg_p2req_flashdl_write
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	addr	;
+	p80211item_uint32_t	len	;
+	p80211item_unk4096_t	data	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_flashdl_write_t;
+
+typedef struct p80211msg_p2req_mm_state
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	enable	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_mm_state_t;
+
+typedef struct p80211msg_p2req_dump_state
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	level	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_dump_state_t;
+
+typedef struct p80211msg_p2req_channel_info
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	channellist	;
+	p80211item_uint32_t	channeldwelltime	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	numchinfo	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_channel_info_t;
+
+typedef struct p80211msg_p2req_channel_info_results
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	channel	;
+	p80211item_uint32_t	resultcode	;
+	p80211item_uint32_t	avgnoiselevel	;
+	p80211item_uint32_t	peaknoiselevel	;
+	p80211item_uint32_t	bssactive	;
+	p80211item_uint32_t	pcfactive	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_channel_info_results_t;
+
+typedef struct p80211msg_p2req_enable
+{
+	UINT32		msgcode	;
+	UINT32		msglen	;
+	UINT8		devname[WLAN_DEVNAMELEN_MAX]	;
+	p80211item_uint32_t	resultcode	;
+} __WLAN_ATTRIB_PACK__ p80211msg_p2req_enable_t;
+
+#endif
diff --git a/drivers/staging/wlan-ng/p80211mgmt.h b/drivers/staging/wlan-ng/p80211mgmt.h
new file mode 100644
index 0000000..bd4c1629
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211mgmt.h
@@ -0,0 +1,575 @@
+/* p80211mgmt.h
+*
+* Macros, types, and functions to handle 802.11 mgmt frames
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares the constants and types used in the interface
+* between a wlan driver and the user mode utilities.
+*
+* Notes:
+*  - Constant values are always in HOST byte order.  To assign
+*    values to multi-byte fields they _must_ be converted to
+*    ieee byte order.  To retrieve multi-byte values from incoming
+*    frames, they must be converted to host order.
+*
+*  - The len member of the frame structure does NOT!!! include
+*    the MAC CRC.  Therefore, the len field on rx'd frames should
+*    have 4 subtracted from it.
+*
+* All functions declared here are implemented in p80211.c
+*
+* The types, macros, and functions defined here are primarily
+* used for encoding and decoding management frames.  They are
+* designed to follow these patterns of use:
+*
+* DECODE:
+* 1) a frame of length len is received into buffer b
+* 2) using the hdr structure and macros, we determine the type
+* 3) an appropriate mgmt frame structure, mf, is allocated and zeroed
+* 4) mf.hdr = b
+*    mf.buf = b
+*    mf.len = len
+* 5) call mgmt_decode( mf )
+* 6) the frame field pointers in mf are now set.  Note that any
+*    multi-byte frame field values accessed using the frame field
+*    pointers are in ieee byte order and will have to be converted
+*    to host order.
+*
+* ENCODE:
+* 1) Library client allocates buffer space for maximum length
+*    frame of the desired type
+* 2) Library client allocates a mgmt frame structure, called mf,
+*    of the desired type
+* 3) Set the following:
+*    mf.type = <desired type>
+*    mf.buf = <allocated buffer address>
+* 4) call mgmt_encode( mf )
+* 5) all of the fixed field pointers and fixed length information element
+*    pointers in mf are now set to their respective locations in the
+*    allocated space (fortunately, all variable length information elements
+*    fall at the end of their respective frames).
+* 5a) The length field is set to include the last of the fixed and fixed
+*     length fields.  It may have to be updated for optional or variable
+* 	length information elements.
+* 6) Optional and variable length information elements are special cases
+*    and must be handled individually by the client code.
+* --------------------------------------------------------------------
+*/
+
+#ifndef _P80211MGMT_H
+#define _P80211MGMT_H
+
+/*================================================================*/
+/* System Includes */
+
+/*================================================================*/
+/* Project Includes */
+
+#ifndef  _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+#ifndef  _P80211HDR_H
+#include "p80211hdr.h"
+#endif
+
+
+/*================================================================*/
+/* Constants */
+
+/*-- Information Element IDs --------------------*/
+#define WLAN_EID_SSID		0
+#define WLAN_EID_SUPP_RATES	1
+#define WLAN_EID_FH_PARMS	2
+#define WLAN_EID_DS_PARMS	3
+#define WLAN_EID_CF_PARMS	4
+#define WLAN_EID_TIM		5
+#define WLAN_EID_IBSS_PARMS	6
+/*-- values 7-15 reserved --*/
+#define WLAN_EID_CHALLENGE	16
+/*-- values 17-31 reserved for challenge text extension --*/
+/*-- values 32-255 reserved --*/
+
+/*-- Reason Codes -------------------------------*/
+#define WLAN_MGMT_REASON_RSVD			0
+#define WLAN_MGMT_REASON_UNSPEC			1
+#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID	2
+#define WLAN_MGMT_REASON_DEAUTH_LEAVING		3
+#define WLAN_MGMT_REASON_DISASSOC_INACTIVE	4
+#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY	5
+#define WLAN_MGMT_REASON_CLASS2_NONAUTH		6
+#define WLAN_MGMT_REASON_CLASS3_NONASSOC	7
+#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT	8
+#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH	9
+
+/*-- Status Codes -------------------------------*/
+#define WLAN_MGMT_STATUS_SUCCESS		0
+#define WLAN_MGMT_STATUS_UNSPEC_FAILURE		1
+#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED	10
+#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC	11
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC	12
+#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG	13
+#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ		14
+#define WLAN_MGMT_STATUS_CHALLENGE_FAIL		15
+#define WLAN_MGMT_STATUS_AUTH_TIMEOUT		16
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY	17
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES	18
+  /* p80211b additions */
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOSHORT	19
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOPBCC	20
+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOAGILITY	21
+
+
+
+/*-- Auth Algorithm Field ---------------------------*/
+#define WLAN_AUTH_ALG_OPENSYSTEM		0
+#define WLAN_AUTH_ALG_SHAREDKEY			1
+
+/*-- Management Frame Field Offsets -------------*/
+/* Note: Not all fields are listed because of variable lengths,   */
+/*       see the code in p80211.c to see how we search for fields */
+/* Note: These offsets are from the start of the frame data       */
+
+#define WLAN_BEACON_OFF_TS			0
+#define WLAN_BEACON_OFF_BCN_INT			8
+#define WLAN_BEACON_OFF_CAPINFO			10
+#define WLAN_BEACON_OFF_SSID			12
+
+#define WLAN_DISASSOC_OFF_REASON		0
+
+#define WLAN_ASSOCREQ_OFF_CAP_INFO		0
+#define WLAN_ASSOCREQ_OFF_LISTEN_INT		2
+#define WLAN_ASSOCREQ_OFF_SSID			4
+
+#define WLAN_ASSOCRESP_OFF_CAP_INFO		0
+#define WLAN_ASSOCRESP_OFF_STATUS		2
+#define WLAN_ASSOCRESP_OFF_AID			4
+#define WLAN_ASSOCRESP_OFF_SUPP_RATES		6
+
+#define WLAN_REASSOCREQ_OFF_CAP_INFO		0
+#define WLAN_REASSOCREQ_OFF_LISTEN_INT		2
+#define WLAN_REASSOCREQ_OFF_CURR_AP		4
+#define WLAN_REASSOCREQ_OFF_SSID		10
+
+#define WLAN_REASSOCRESP_OFF_CAP_INFO		0
+#define WLAN_REASSOCRESP_OFF_STATUS		2
+#define WLAN_REASSOCRESP_OFF_AID		4
+#define WLAN_REASSOCRESP_OFF_SUPP_RATES		6
+
+#define WLAN_PROBEREQ_OFF_SSID			0
+
+#define WLAN_PROBERESP_OFF_TS			0
+#define WLAN_PROBERESP_OFF_BCN_INT		8
+#define WLAN_PROBERESP_OFF_CAP_INFO		10
+#define WLAN_PROBERESP_OFF_SSID			12
+
+#define WLAN_AUTHEN_OFF_AUTH_ALG		0
+#define WLAN_AUTHEN_OFF_AUTH_SEQ		2
+#define WLAN_AUTHEN_OFF_STATUS			4
+#define WLAN_AUTHEN_OFF_CHALLENGE		6
+
+#define WLAN_DEAUTHEN_OFF_REASON		0
+
+
+/*================================================================*/
+/* Macros */
+
+/*-- Capability Field ---------------------------*/
+#define WLAN_GET_MGMT_CAP_INFO_ESS(n)		((n) & BIT0)
+#define WLAN_GET_MGMT_CAP_INFO_IBSS(n)		(((n) & BIT1) >> 1)
+#define WLAN_GET_MGMT_CAP_INFO_CFPOLLABLE(n)	(((n) & BIT2) >> 2)
+#define WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(n)	(((n) & BIT3) >> 3)
+#define WLAN_GET_MGMT_CAP_INFO_PRIVACY(n)	(((n) & BIT4) >> 4)
+  /* p80211b additions */
+#define WLAN_GET_MGMT_CAP_INFO_SHORT(n)		(((n) & BIT5) >> 5)
+#define WLAN_GET_MGMT_CAP_INFO_PBCC(n)		(((n) & BIT6) >> 6)
+#define WLAN_GET_MGMT_CAP_INFO_AGILITY(n)	(((n) & BIT7) >> 7)
+
+#define WLAN_SET_MGMT_CAP_INFO_ESS(n)		(n)
+#define WLAN_SET_MGMT_CAP_INFO_IBSS(n)		((n) << 1)
+#define WLAN_SET_MGMT_CAP_INFO_CFPOLLABLE(n)	((n) << 2)
+#define WLAN_SET_MGMT_CAP_INFO_CFPOLLREQ(n)	((n) << 3)
+#define WLAN_SET_MGMT_CAP_INFO_PRIVACY(n)	((n) << 4)
+  /* p80211b additions */
+#define WLAN_SET_MGMT_CAP_INFO_SHORT(n)		((n) << 5)
+#define WLAN_SET_MGMT_CAP_INFO_PBCC(n)		((n) << 6)
+#define WLAN_SET_MGMT_CAP_INFO_AGILITY(n)	((n) << 7)
+
+
+/*================================================================*/
+/* Types */
+
+/*-- Information Element Types --------------------*/
+/* prototype structure, all IEs start with these members */
+
+typedef struct wlan_ie
+{
+	UINT8	eid;
+	UINT8	len;
+} __WLAN_ATTRIB_PACK__ wlan_ie_t;
+
+/*-- Service Set Identity (SSID)  -----------------*/
+typedef struct wlan_ie_ssid
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT8	ssid[1];  /* may be zero, ptrs may overlap */
+} __WLAN_ATTRIB_PACK__ wlan_ie_ssid_t;
+
+/*-- Supported Rates  -----------------------------*/
+typedef struct wlan_ie_supp_rates
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT8	rates[1];  /* had better be at LEAST one! */
+} __WLAN_ATTRIB_PACK__ wlan_ie_supp_rates_t;
+
+/*-- FH Parameter Set  ----------------------------*/
+typedef struct wlan_ie_fh_parms
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT16	dwell;
+	UINT8	hopset;
+	UINT8	hoppattern;
+	UINT8	hopindex;
+} __WLAN_ATTRIB_PACK__ wlan_ie_fh_parms_t;
+
+/*-- DS Parameter Set  ----------------------------*/
+typedef struct wlan_ie_ds_parms
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT8	curr_ch;
+} __WLAN_ATTRIB_PACK__ wlan_ie_ds_parms_t;
+
+/*-- CF Parameter Set  ----------------------------*/
+
+typedef struct wlan_ie_cf_parms
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT8	cfp_cnt;
+	UINT8	cfp_period;
+	UINT16	cfp_maxdur;
+	UINT16	cfp_durremaining;
+} __WLAN_ATTRIB_PACK__ wlan_ie_cf_parms_t;
+
+/*-- TIM ------------------------------------------*/
+typedef struct wlan_ie_tim
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT8	dtim_cnt;
+	UINT8	dtim_period;
+	UINT8	bitmap_ctl;
+	UINT8	virt_bm[1];
+} __WLAN_ATTRIB_PACK__ wlan_ie_tim_t;
+
+/*-- IBSS Parameter Set ---------------------------*/
+typedef struct wlan_ie_ibss_parms
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT16	atim_win;
+} __WLAN_ATTRIB_PACK__ wlan_ie_ibss_parms_t;
+
+/*-- Challenge Text  ------------------------------*/
+typedef struct wlan_ie_challenge
+{
+	UINT8	eid;
+	UINT8	len;
+	UINT8	challenge[1];
+} __WLAN_ATTRIB_PACK__ wlan_ie_challenge_t;
+
+/*-------------------------------------------------*/
+/*  Frame Types  */
+
+/* prototype structure, all mgmt frame types will start with these members */
+typedef struct wlan_fr_mgmt
+{
+	UINT16			type;
+	UINT16			len;	/* DOES NOT include CRC !!!!*/
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	/*-- info elements ----------*/
+} wlan_fr_mgmt_t;
+
+/*-- Beacon ---------------------------------------*/
+typedef struct wlan_fr_beacon
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT64			*ts;
+	UINT16			*bcn_int;
+	UINT16			*cap_info;
+	/*-- info elements ----------*/
+	wlan_ie_ssid_t		*ssid;
+	wlan_ie_supp_rates_t	*supp_rates;
+	wlan_ie_fh_parms_t	*fh_parms;
+	wlan_ie_ds_parms_t	*ds_parms;
+	wlan_ie_cf_parms_t	*cf_parms;
+	wlan_ie_ibss_parms_t	*ibss_parms;
+	wlan_ie_tim_t		*tim;
+
+} wlan_fr_beacon_t;
+
+
+/*-- IBSS ATIM ------------------------------------*/
+typedef struct wlan_fr_ibssatim
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8*			buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+
+	/*-- fixed fields -----------*/
+	/*-- info elements ----------*/
+
+	/* this frame type has a null body */
+
+} wlan_fr_ibssatim_t;
+
+/*-- Disassociation -------------------------------*/
+typedef struct wlan_fr_disassoc
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*reason;
+
+	/*-- info elements ----------*/
+
+} wlan_fr_disassoc_t;
+
+/*-- Association Request --------------------------*/
+typedef struct wlan_fr_assocreq
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8*			buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*cap_info;
+	UINT16			*listen_int;
+	/*-- info elements ----------*/
+	wlan_ie_ssid_t		*ssid;
+	wlan_ie_supp_rates_t	*supp_rates;
+
+} wlan_fr_assocreq_t;
+
+/*-- Association Response -------------------------*/
+typedef struct wlan_fr_assocresp
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*cap_info;
+	UINT16			*status;
+	UINT16			*aid;
+	/*-- info elements ----------*/
+	wlan_ie_supp_rates_t	*supp_rates;
+
+} wlan_fr_assocresp_t;
+
+/*-- Reassociation Request ------------------------*/
+typedef struct wlan_fr_reassocreq
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*cap_info;
+	UINT16			*listen_int;
+	UINT8			*curr_ap;
+	/*-- info elements ----------*/
+	wlan_ie_ssid_t		*ssid;
+	wlan_ie_supp_rates_t	*supp_rates;
+
+} wlan_fr_reassocreq_t;
+
+/*-- Reassociation Response -----------------------*/
+typedef struct wlan_fr_reassocresp
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*cap_info;
+	UINT16			*status;
+	UINT16			*aid;
+	/*-- info elements ----------*/
+	wlan_ie_supp_rates_t	*supp_rates;
+
+} wlan_fr_reassocresp_t;
+
+/*-- Probe Request --------------------------------*/
+typedef struct wlan_fr_probereq
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	/*-- info elements ----------*/
+	wlan_ie_ssid_t		*ssid;
+	wlan_ie_supp_rates_t	*supp_rates;
+
+} wlan_fr_probereq_t;
+
+/*-- Probe Response -------------------------------*/
+typedef struct wlan_fr_proberesp
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT64			*ts;
+	UINT16			*bcn_int;
+	UINT16			*cap_info;
+	/*-- info elements ----------*/
+	wlan_ie_ssid_t		*ssid;
+	wlan_ie_supp_rates_t	*supp_rates;
+	wlan_ie_fh_parms_t	*fh_parms;
+	wlan_ie_ds_parms_t	*ds_parms;
+	wlan_ie_cf_parms_t	*cf_parms;
+	wlan_ie_ibss_parms_t	*ibss_parms;
+} wlan_fr_proberesp_t;
+
+/*-- Authentication -------------------------------*/
+typedef struct wlan_fr_authen
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*auth_alg;
+	UINT16			*auth_seq;
+	UINT16			*status;
+	/*-- info elements ----------*/
+	wlan_ie_challenge_t	*challenge;
+
+} wlan_fr_authen_t;
+
+/*-- Deauthenication -----------------------------*/
+typedef struct wlan_fr_deauthen
+{
+	UINT16			type;
+	UINT16			len;
+	UINT8			*buf;
+	p80211_hdr_t		*hdr;
+	/* used for target specific data, skb in Linux */
+	void			*priv;
+	/*-- fixed fields -----------*/
+	UINT16			*reason;
+
+	/*-- info elements ----------*/
+
+} wlan_fr_deauthen_t;
+
+
+/*================================================================*/
+/* Extern Declarations */
+
+
+/*================================================================*/
+/* Function Declarations */
+
+void wlan_mgmt_encode_beacon( wlan_fr_beacon_t  *f );
+void wlan_mgmt_decode_beacon( wlan_fr_beacon_t  *f );
+void wlan_mgmt_encode_disassoc( wlan_fr_disassoc_t  *f );
+void wlan_mgmt_decode_disassoc( wlan_fr_disassoc_t  *f );
+void wlan_mgmt_encode_assocreq( wlan_fr_assocreq_t  *f );
+void wlan_mgmt_decode_assocreq( wlan_fr_assocreq_t  *f );
+void wlan_mgmt_encode_assocresp( wlan_fr_assocresp_t  *f );
+void wlan_mgmt_decode_assocresp( wlan_fr_assocresp_t  *f );
+void wlan_mgmt_encode_reassocreq( wlan_fr_reassocreq_t  *f );
+void wlan_mgmt_decode_reassocreq( wlan_fr_reassocreq_t  *f );
+void wlan_mgmt_encode_reassocresp( wlan_fr_reassocresp_t  *f );
+void wlan_mgmt_decode_reassocresp( wlan_fr_reassocresp_t  *f );
+void wlan_mgmt_encode_probereq( wlan_fr_probereq_t  *f );
+void wlan_mgmt_decode_probereq( wlan_fr_probereq_t  *f );
+void wlan_mgmt_encode_proberesp( wlan_fr_proberesp_t  *f );
+void wlan_mgmt_decode_proberesp( wlan_fr_proberesp_t  *f );
+void wlan_mgmt_encode_authen( wlan_fr_authen_t  *f );
+void wlan_mgmt_decode_authen( wlan_fr_authen_t  *f );
+void wlan_mgmt_encode_deauthen( wlan_fr_deauthen_t  *f );
+void wlan_mgmt_decode_deauthen( wlan_fr_deauthen_t  *f );
+
+
+#endif /* _P80211MGMT_H */
diff --git a/drivers/staging/wlan-ng/p80211mod.c b/drivers/staging/wlan-ng/p80211mod.c
new file mode 100644
index 0000000..e2c3f63
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211mod.c
@@ -0,0 +1,216 @@
+/* src/p80211/p80211mod.c
+*
+* Module entry and exit for p80211
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file contains the p80211.o entry and exit points defined for linux
+* kernel modules.
+*
+* Notes:
+* - all module parameters for  p80211.o should be defined here.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,25))
+#include <linux/moduleparam.h>
+#endif
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+
+#include "version.h"
+#include "wlan_compat.h"
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211req.h"
+
+/*================================================================*/
+/* Local Constants */
+
+
+/*================================================================*/
+/* Local Macros */
+
+
+/*================================================================*/
+/* Local Types */
+
+
+/*================================================================*/
+/* Local Static Definitions */
+
+static char *version = "p80211.o: " WLAN_RELEASE;
+
+
+/*----------------------------------------------------------------*/
+/* --Module Parameters */
+
+int wlan_watchdog = 5000;
+module_param(wlan_watchdog, int, 0644);
+MODULE_PARM_DESC(wlan_watchdog, "transmit timeout in milliseconds");
+
+int wlan_wext_write = 0;
+#if WIRELESS_EXT > 12
+module_param(wlan_wext_write, int, 0644);
+MODULE_PARM_DESC(wlan_wext_write, "enable write wireless extensions");
+#endif
+
+#ifdef WLAN_INCLUDE_DEBUG
+int wlan_debug=0;
+module_param(wlan_debug, int, 0644);
+MODULE_PARM_DESC(wlan_debug, "p80211 debug level");
+#endif
+
+MODULE_LICENSE("Dual MPL/GPL");
+
+/*================================================================*/
+/* Local Function Declarations */
+
+int	init_module(void);
+void	cleanup_module(void);
+
+/*================================================================*/
+/* Function Definitions */
+
+/*----------------------------------------------------------------
+* init_module
+*
+* Module initialization routine, called once at module load time.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	0	- success
+*	~0	- failure, module is unloaded.
+*
+* Side effects:
+*	TODO: define
+*
+* Call context:
+*	process thread (insmod or modprobe)
+----------------------------------------------------------------*/
+int init_module(void)
+{
+        DBFENTER;
+
+#if 0
+        printk(KERN_NOTICE "%s (%s) Loaded\n", version, WLAN_BUILD_DATE);
+#endif
+
+	p80211netdev_startup();
+#ifdef CONFIG_HOTPLUG
+	p80211_run_sbin_hotplug(NULL, WLAN_HOTPLUG_STARTUP);
+#endif
+
+        DBFEXIT;
+        return 0;
+}
+
+
+/*----------------------------------------------------------------
+* cleanup_module
+*
+* Called at module unload time.  This is our last chance to
+* clean up after ourselves.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	TODO: define
+*
+* Call context:
+*	process thread
+*
+----------------------------------------------------------------*/
+void cleanup_module(void)
+{
+        DBFENTER;
+
+#ifdef CONFIG_HOTPLUG
+	p80211_run_sbin_hotplug(NULL, WLAN_HOTPLUG_SHUTDOWN);
+#endif
+	p80211netdev_shutdown();
+        printk(KERN_NOTICE "%s Unloaded\n", version);
+
+        DBFEXIT;
+        return;
+}
+
+EXPORT_SYMBOL(p80211netdev_hwremoved);
+EXPORT_SYMBOL(register_wlandev);
+EXPORT_SYMBOL(p80211netdev_rx);
+EXPORT_SYMBOL(unregister_wlandev);
+EXPORT_SYMBOL(wlan_setup);
+EXPORT_SYMBOL(wlan_unsetup);
+EXPORT_SYMBOL(p80211_suspend);
+EXPORT_SYMBOL(p80211_resume);
+
+EXPORT_SYMBOL(p80211skb_free);
+EXPORT_SYMBOL(p80211skb_rxmeta_attach);
+
+EXPORT_SYMBOL(p80211wext_event_associated);
diff --git a/drivers/staging/wlan-ng/p80211msg.h b/drivers/staging/wlan-ng/p80211msg.h
new file mode 100644
index 0000000..c14e9fb
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211msg.h
@@ -0,0 +1,102 @@
+/* p80211msg.h
+*
+* Macros, constants, types, and funcs for req and ind messages
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _P80211MSG_H
+#define _P80211MSG_H
+
+/*================================================================*/
+/* System Includes */
+
+/*================================================================*/
+/* Project Includes */
+
+#ifndef _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+/*================================================================*/
+/* Constants */
+
+#define MSG_BUFF_LEN		4000
+#define WLAN_DEVNAMELEN_MAX	16
+
+/*================================================================*/
+/* Macros */
+
+/*================================================================*/
+/* Types */
+
+/*--------------------------------------------------------------------*/
+/*----- Message Structure Types --------------------------------------*/
+
+/*--------------------------------------------------------------------*/
+/* Prototype msg type */
+
+typedef struct p80211msg
+{
+	UINT32	msgcode;
+	UINT32	msglen;
+	UINT8	devname[WLAN_DEVNAMELEN_MAX];
+} __WLAN_ATTRIB_PACK__ p80211msg_t;
+
+typedef struct p80211msgd
+{
+	UINT32	msgcode;
+	UINT32	msglen;
+	UINT8	devname[WLAN_DEVNAMELEN_MAX];
+	UINT8	args[0];
+} __WLAN_ATTRIB_PACK__ p80211msgd_t;
+
+/*================================================================*/
+/* Extern Declarations */
+
+
+/*================================================================*/
+/* Function Declarations */
+
+#endif  /* _P80211MSG_H */
+
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
new file mode 100644
index 0000000..11f84a8
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -0,0 +1,1502 @@
+/* src/p80211/p80211knetdev.c
+*
+* Linux Kernel net device interface
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* The functions required for a Linux network device are defined here.
+*
+* --------------------------------------------------------------------
+*/
+
+
+/*================================================================*/
+/* System Includes */
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/kmod.h>
+#include <linux/if_arp.h>
+#include <linux/wireless.h>
+#include <linux/sockios.h>
+#include <linux/etherdevice.h>
+
+#include <asm/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+#ifdef SIOCETHTOOL
+#include <linux/ethtool.h>
+#endif
+
+#if WIRELESS_EXT > 12
+#include <net/iw_handler.h>
+#endif
+#include <net/net_namespace.h>
+
+/*================================================================*/
+/* Project Includes */
+
+#include "version.h"
+#include "wlan_compat.h"
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211conv.h"
+#include "p80211mgmt.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211ioctl.h"
+#include "p80211req.h"
+#include "p80211metastruct.h"
+#include "p80211metadef.h"
+
+/*================================================================*/
+/* Local Constants */
+
+/*================================================================*/
+/* Local Macros */
+
+
+/*================================================================*/
+/* Local Types */
+
+/*================================================================*/
+/* Local Static Definitions */
+
+#define __NO_VERSION__		/* prevent the static definition */
+
+#ifdef CONFIG_PROC_FS
+static struct proc_dir_entry	*proc_p80211;
+#endif
+
+/*================================================================*/
+/* Local Function Declarations */
+
+/* Support functions */
+static void p80211netdev_rx_bh(unsigned long arg);
+
+/* netdevice method functions */
+static int p80211knetdev_init( netdevice_t *netdev);
+static struct net_device_stats* p80211knetdev_get_stats(netdevice_t *netdev);
+static int p80211knetdev_open( netdevice_t *netdev);
+static int p80211knetdev_stop( netdevice_t *netdev );
+static int p80211knetdev_hard_start_xmit( struct sk_buff *skb, netdevice_t *netdev);
+static void p80211knetdev_set_multicast_list(netdevice_t *dev);
+static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd);
+static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr);
+static void p80211knetdev_tx_timeout(netdevice_t *netdev);
+static int p80211_rx_typedrop( wlandevice_t *wlandev, UINT16 fc);
+
+#ifdef CONFIG_PROC_FS
+static int
+p80211netdev_proc_read(
+	char	*page,
+	char	**start,
+	off_t	offset,
+	int	count,
+	int	*eof,
+	void	*data);
+#endif
+
+/*================================================================*/
+/* Function Definitions */
+
+/*----------------------------------------------------------------
+* p80211knetdev_startup
+*
+* Initialize the wlandevice/netdevice part of 802.11 services at
+* load time.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+void p80211netdev_startup(void)
+{
+	DBFENTER;
+
+#ifdef CONFIG_PROC_FS
+	if (init_net.proc_net != NULL) {
+		proc_p80211 = create_proc_entry(
+				"p80211",
+				(S_IFDIR|S_IRUGO|S_IXUGO),
+				init_net.proc_net);
+	}
+#endif
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* p80211knetdev_shutdown
+*
+* Shutdown the wlandevice/netdevice part of 802.11 services at
+* unload time.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+void
+p80211netdev_shutdown(void)
+{
+	DBFENTER;
+#ifdef CONFIG_PROC_FS
+	if (proc_p80211 != NULL) {
+		remove_proc_entry("p80211", init_net.proc_net);
+	}
+#endif
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* p80211knetdev_init
+*
+* Init method for a Linux netdevice.  Called in response to
+* register_netdev.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+static int p80211knetdev_init( netdevice_t *netdev)
+{
+	DBFENTER;
+	/* Called in response to register_netdev */
+	/* This is usually the probe function, but the probe has */
+	/* already been done by the MSD and the create_kdev */
+	/* function.  All we do here is return success */
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* p80211knetdev_get_stats
+*
+* Statistics retrieval for linux netdevices.  Here we're reporting
+* the Linux i/f level statistics.  Hence, for the primary numbers,
+* we don't want to report the numbers from the MIB.  Eventually,
+* it might be useful to collect some of the error counters though.
+*
+* Arguments:
+*	netdev		Linux netdevice
+*
+* Returns:
+*	the address of the statistics structure
+----------------------------------------------------------------*/
+static struct net_device_stats*
+p80211knetdev_get_stats(netdevice_t *netdev)
+{
+	wlandevice_t	*wlandev = (wlandevice_t*)netdev->priv;
+	DBFENTER;
+
+	/* TODO: review the MIB stats for items that correspond to
+		linux stats */
+
+	DBFEXIT;
+	return &(wlandev->linux_stats);
+}
+
+
+/*----------------------------------------------------------------
+* p80211knetdev_open
+*
+* Linux netdevice open method.  Following a successful call here,
+* the device is supposed to be ready for tx and rx.  In our
+* situation that may not be entirely true due to the state of the
+* MAC below.
+*
+* Arguments:
+*	netdev		Linux network device structure
+*
+* Returns:
+*	zero on success, non-zero otherwise
+----------------------------------------------------------------*/
+static int p80211knetdev_open( netdevice_t *netdev )
+{
+	int 		result = 0; /* success */
+	wlandevice_t	*wlandev = (wlandevice_t*)(netdev->priv);
+
+	DBFENTER;
+
+	/* Check to make sure the MSD is running */
+	if ( wlandev->msdstate != WLAN_MSD_RUNNING ) {
+		return -ENODEV;
+	}
+
+	/* Tell the MSD to open */
+	if ( wlandev->open != NULL) {
+		result = wlandev->open(wlandev);
+		if ( result == 0 ) {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43) )
+			netdev->interrupt = 0;
+#endif
+			p80211netdev_start_queue(wlandev);
+			wlandev->state = WLAN_DEVICE_OPEN;
+		}
+	} else {
+		result = -EAGAIN;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* p80211knetdev_stop
+*
+* Linux netdevice stop (close) method.  Following this call,
+* no frames should go up or down through this interface.
+*
+* Arguments:
+*	netdev		Linux network device structure
+*
+* Returns:
+*	zero on success, non-zero otherwise
+----------------------------------------------------------------*/
+static int p80211knetdev_stop( netdevice_t *netdev )
+{
+	int		result = 0;
+	wlandevice_t	*wlandev = (wlandevice_t*)(netdev->priv);
+
+	DBFENTER;
+
+	if ( wlandev->close != NULL ) {
+		result = wlandev->close(wlandev);
+	}
+
+	p80211netdev_stop_queue(wlandev);
+	wlandev->state = WLAN_DEVICE_CLOSED;
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* p80211netdev_rx
+*
+* Frame receive function called by the mac specific driver.
+*
+* Arguments:
+*	wlandev		WLAN network device structure
+*	skb		skbuff containing a full 802.11 frame.
+* Returns:
+*	nothing
+* Side effects:
+*
+----------------------------------------------------------------*/
+void
+p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb )
+{
+	DBFENTER;
+
+	/* Enqueue for post-irq processing */
+	skb_queue_tail(&wlandev->nsd_rxq, skb);
+
+	tasklet_schedule(&wlandev->rx_bh);
+
+        DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* p80211netdev_rx_bh
+*
+* Deferred processing of all received frames.
+*
+* Arguments:
+*	wlandev		WLAN network device structure
+*	skb		skbuff containing a full 802.11 frame.
+* Returns:
+*	nothing
+* Side effects:
+*
+----------------------------------------------------------------*/
+static void p80211netdev_rx_bh(unsigned long arg)
+{
+	wlandevice_t *wlandev = (wlandevice_t *) arg;
+	struct sk_buff *skb = NULL;
+	netdevice_t     *dev = wlandev->netdev;
+	p80211_hdr_a3_t *hdr;
+	UINT16 fc;
+
+        DBFENTER;
+
+	/* Let's empty our our queue */
+	while ( (skb = skb_dequeue(&wlandev->nsd_rxq)) ) {
+		if (wlandev->state == WLAN_DEVICE_OPEN) {
+
+			if (dev->type != ARPHRD_ETHER) {
+				/* RAW frame; we shouldn't convert it */
+				// XXX Append the Prism Header here instead.
+
+				/* set up various data fields */
+				skb->dev = dev;
+				skb_reset_mac_header(skb);
+				skb->ip_summed = CHECKSUM_NONE;
+				skb->pkt_type = PACKET_OTHERHOST;
+				skb->protocol = htons(ETH_P_80211_RAW);
+				dev->last_rx = jiffies;
+
+				wlandev->linux_stats.rx_packets++;
+				wlandev->linux_stats.rx_bytes += skb->len;
+				netif_rx_ni(skb);
+				continue;
+			} else {
+				hdr = (p80211_hdr_a3_t *)skb->data;
+				fc = ieee2host16(hdr->fc);
+				if (p80211_rx_typedrop(wlandev, fc)) {
+					dev_kfree_skb(skb);
+					continue;
+				}
+
+				/* perform mcast filtering */
+				if (wlandev->netdev->flags & IFF_ALLMULTI) {
+					/* allow my local address through */
+					if (memcmp(hdr->a1, wlandev->netdev->dev_addr, WLAN_ADDR_LEN) != 0) {
+						/* but reject anything else that isn't multicast */
+						if (!(hdr->a1[0] & 0x01)) {
+							dev_kfree_skb(skb);
+							continue;
+						}
+					}
+				}
+
+				if ( skb_p80211_to_ether(wlandev, wlandev->ethconv, skb) == 0 ) {
+					skb->dev->last_rx = jiffies;
+					wlandev->linux_stats.rx_packets++;
+					wlandev->linux_stats.rx_bytes += skb->len;
+					netif_rx_ni(skb);
+					continue;
+				}
+				WLAN_LOG_DEBUG(1, "p80211_to_ether failed.\n");
+			}
+		}
+		dev_kfree_skb(skb);
+	}
+
+        DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* p80211knetdev_hard_start_xmit
+*
+* Linux netdevice method for transmitting a frame.
+*
+* Arguments:
+*	skb	Linux sk_buff containing the frame.
+*	netdev	Linux netdevice.
+*
+* Side effects:
+*	If the lower layers report that buffers are full. netdev->tbusy
+*	will be set to prevent higher layers from sending more traffic.
+*
+*	Note: If this function returns non-zero, higher layers retain
+*	      ownership of the skb.
+*
+* Returns:
+*	zero on success, non-zero on failure.
+----------------------------------------------------------------*/
+static int p80211knetdev_hard_start_xmit( struct sk_buff *skb, netdevice_t *netdev)
+{
+	int		result = 0;
+	int		txresult = -1;
+	wlandevice_t	*wlandev = (wlandevice_t*)netdev->priv;
+	p80211_hdr_t    p80211_hdr;
+	p80211_metawep_t p80211_wep;
+
+	DBFENTER;
+
+	if (skb == NULL) {
+		return 0;
+	}
+
+        if (wlandev->state != WLAN_DEVICE_OPEN) {
+		result = 1;
+		goto failed;
+	}
+
+	memset(&p80211_hdr, 0, sizeof(p80211_hdr_t));
+	memset(&p80211_wep, 0, sizeof(p80211_metawep_t));
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38) )
+	if ( test_and_set_bit(0, (void*)&(netdev->tbusy)) != 0 ) {
+		/* We've been called w/ tbusy set, has the tx */
+		/* path stalled?   */
+		WLAN_LOG_DEBUG(1, "called when tbusy set\n");
+		result = 1;
+		goto failed;
+	}
+#else
+	if ( netif_queue_stopped(netdev) ) {
+		WLAN_LOG_DEBUG(1, "called when queue stopped.\n");
+		result = 1;
+		goto failed;
+	}
+
+	netif_stop_queue(netdev);
+
+	/* No timeout handling here, 2.3.38+ kernels call the
+	 * timeout function directly.
+	 * TODO: Add timeout handling.
+	*/
+#endif
+
+	/* Check to see that a valid mode is set */
+	switch( wlandev->macmode ) {
+	case WLAN_MACMODE_IBSS_STA:
+	case WLAN_MACMODE_ESS_STA:
+	case WLAN_MACMODE_ESS_AP:
+		break;
+	default:
+		/* Mode isn't set yet, just drop the frame
+		 * and return success .
+		 * TODO: we need a saner way to handle this
+		 */
+		if(skb->protocol != ETH_P_80211_RAW) {
+			p80211netdev_start_queue(wlandev);
+			WLAN_LOG_NOTICE(
+				"Tx attempt prior to association, frame dropped.\n");
+			wlandev->linux_stats.tx_dropped++;
+			result = 0;
+			goto failed;
+		}
+		break;
+	}
+
+	/* Check for raw transmits */
+	if(skb->protocol == ETH_P_80211_RAW) {
+		if (!capable(CAP_NET_ADMIN)) {
+			result = 1;
+			goto failed;
+		}
+		/* move the header over */
+		memcpy(&p80211_hdr, skb->data, sizeof(p80211_hdr_t));
+		skb_pull(skb, sizeof(p80211_hdr_t));
+	} else {
+		if ( skb_ether_to_p80211(wlandev, wlandev->ethconv, skb, &p80211_hdr, &p80211_wep) != 0 ) {
+			/* convert failed */
+			WLAN_LOG_DEBUG(1, "ether_to_80211(%d) failed.\n",
+					wlandev->ethconv);
+			result = 1;
+			goto failed;
+		}
+	}
+	if ( wlandev->txframe == NULL ) {
+		result = 1;
+		goto failed;
+	}
+
+	netdev->trans_start = jiffies;
+
+	wlandev->linux_stats.tx_packets++;
+	/* count only the packet payload */
+	wlandev->linux_stats.tx_bytes += skb->len;
+
+	txresult = wlandev->txframe(wlandev, skb, &p80211_hdr, &p80211_wep);
+
+	if ( txresult == 0) {
+		/* success and more buf */
+		/* avail, re: hw_txdata */
+		p80211netdev_wake_queue(wlandev);
+		result = 0;
+	} else if ( txresult == 1 ) {
+		/* success, no more avail */
+		WLAN_LOG_DEBUG(3, "txframe success, no more bufs\n");
+		/* netdev->tbusy = 1;  don't set here, irqhdlr */
+		/*   may have already cleared it */
+		result = 0;
+	} else if ( txresult == 2 ) {
+		/* alloc failure, drop frame */
+		WLAN_LOG_DEBUG(3, "txframe returned alloc_fail\n");
+		result = 1;
+	} else {
+		/* buffer full or queue busy, drop frame. */
+		WLAN_LOG_DEBUG(3, "txframe returned full or busy\n");
+		result = 1;
+	}
+
+ failed:
+	/* Free up the WEP buffer if it's not the same as the skb */
+	if ((p80211_wep.data) && (p80211_wep.data != skb->data))
+		kfree(p80211_wep.data);
+
+	/* we always free the skb here, never in a lower level. */
+	if (!result)
+		dev_kfree_skb(skb);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* p80211knetdev_set_multicast_list
+*
+* Called from higher lavers whenever there's a need to set/clear
+* promiscuous mode or rewrite the multicast list.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+static void p80211knetdev_set_multicast_list(netdevice_t *dev)
+{
+	wlandevice_t	*wlandev = (wlandevice_t*)dev->priv;
+
+	DBFENTER;
+
+	/* TODO:  real multicast support as well */
+
+	if (wlandev->set_multicast_list)
+		wlandev->set_multicast_list(wlandev, dev);
+
+	DBFEXIT;
+}
+
+#ifdef SIOCETHTOOL
+
+static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
+{
+	UINT32 ethcmd;
+	struct ethtool_drvinfo info;
+	struct ethtool_value edata;
+
+	memset(&info, 0, sizeof(info));
+	memset(&edata, 0, sizeof(edata));
+
+	if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
+		return -EFAULT;
+
+	switch (ethcmd) {
+	case ETHTOOL_GDRVINFO:
+		info.cmd = ethcmd;
+		snprintf(info.driver, sizeof(info.driver), "p80211_%s",
+			 wlandev->nsdname);
+		snprintf(info.version, sizeof(info.version), "%s",
+			 WLAN_RELEASE);
+
+		// info.fw_version
+		// info.bus_info
+
+		if (copy_to_user(useraddr, &info, sizeof(info)))
+			return -EFAULT;
+		return 0;
+#ifdef ETHTOOL_GLINK
+	case ETHTOOL_GLINK:
+		edata.cmd = ethcmd;
+
+		if (wlandev->linkstatus &&
+		    (wlandev->macmode != WLAN_MACMODE_NONE)) {
+			edata.data = 1;
+		} else {
+			edata.data = 0;
+		}
+
+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
+                        return -EFAULT;
+		return 0;
+	}
+#endif
+
+	return -EOPNOTSUPP;
+}
+
+#endif
+
+/*----------------------------------------------------------------
+* p80211knetdev_do_ioctl
+*
+* Handle an ioctl call on one of our devices.  Everything Linux
+* ioctl specific is done here.  Then we pass the contents of the
+* ifr->data to the request message handler.
+*
+* Arguments:
+*	dev	Linux kernel netdevice
+*	ifr	Our private ioctl request structure, typed for the
+*		generic struct ifreq so we can use ptr to func
+*		w/o cast.
+*
+* Returns:
+*	zero on success, a negative errno on failure.  Possible values:
+*		-ENETDOWN Device isn't up.
+*		-EBUSY	cmd already in progress
+*		-ETIME	p80211 cmd timed out (MSD may have its own timers)
+*		-EFAULT memory fault copying msg from user buffer
+*		-ENOMEM unable to allocate kernel msg buffer
+*		-ENOSYS	bad magic, it the cmd really for us?
+*		-EINTR	sleeping on cmd, awakened by signal, cmd cancelled.
+*
+* Call Context:
+*	Process thread (ioctl caller).  TODO: SMP support may require
+*	locks.
+----------------------------------------------------------------*/
+static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
+{
+	int			result = 0;
+	p80211ioctl_req_t	*req = (p80211ioctl_req_t*)ifr;
+	wlandevice_t		*wlandev = (wlandevice_t*)dev->priv;
+	UINT8			*msgbuf;
+	DBFENTER;
+
+	WLAN_LOG_DEBUG(2, "rx'd ioctl, cmd=%d, len=%d\n", cmd, req->len);
+
+#if WIRELESS_EXT < 13
+	/* Is this a wireless extensions ioctl? */
+	if ((cmd >= SIOCIWFIRST) && (cmd <= SIOCIWLAST)) {
+		if ((result = p80211wext_support_ioctl(dev, ifr, cmd))
+		    != (-EOPNOTSUPP)) {
+			goto bail;
+		}
+	}
+#endif
+
+#ifdef SIOCETHTOOL
+	if (cmd == SIOCETHTOOL) {
+		result = p80211netdev_ethtool(wlandev, (void __user *) ifr->ifr_data);
+		goto bail;
+	}
+#endif
+
+	/* Test the magic, assume ifr is good if it's there */
+	if ( req->magic != P80211_IOCTL_MAGIC ) {
+		result = -ENOSYS;
+		goto bail;
+	}
+
+	if ( cmd == P80211_IFTEST ) {
+		result = 0;
+		goto bail;
+	} else if ( cmd != P80211_IFREQ ) {
+		result = -ENOSYS;
+		goto bail;
+	}
+
+	/* Allocate a buf of size req->len */
+	if ((msgbuf = kmalloc( req->len, GFP_KERNEL))) {
+		if ( copy_from_user( msgbuf, (void __user *) req->data, req->len) ) {
+			result = -EFAULT;
+		} else {
+			result = p80211req_dorequest( wlandev, msgbuf);
+		}
+
+		if ( result == 0 ) {
+			if ( copy_to_user( (void __user *) req->data, msgbuf, req->len)) {
+				result = -EFAULT;
+			}
+		}
+		kfree(msgbuf);
+	} else {
+		result = -ENOMEM;
+	}
+bail:
+	DBFEXIT;
+
+	return result; /* If allocate,copyfrom or copyto fails, return errno */
+}
+
+/*----------------------------------------------------------------
+* p80211knetdev_set_mac_address
+*
+* Handles the ioctl for changing the MACAddress of a netdevice
+*
+* references: linux/netdevice.h and drivers/net/net_init.c
+*
+* NOTE: [MSM] We only prevent address changes when the netdev is
+* up.  We don't control anything based on dot11 state.  If the
+* address is changed on a STA that's currently associated, you
+* will probably lose the ability to send and receive data frames.
+* Just be aware.  Therefore, this should usually only be done
+* prior to scan/join/auth/assoc.
+*
+* Arguments:
+*	dev	netdevice struct
+*	addr	the new MACAddress (a struct)
+*
+* Returns:
+*	zero on success, a negative errno on failure.  Possible values:
+*		-EBUSY	device is bussy (cmd not possible)
+*		-and errors returned by: p80211req_dorequest(..)
+*
+* by: Collin R. Mulliner <collin@mulliner.org>
+----------------------------------------------------------------*/
+static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
+{
+	struct sockaddr			*new_addr = addr;
+	p80211msg_dot11req_mibset_t	dot11req;
+	p80211item_unk392_t		*mibattr;
+	p80211item_pstr6_t		*macaddr;
+	p80211item_uint32_t		*resultcode;
+	int result = 0;
+
+	DBFENTER;
+	/* If we're running, we don't allow MAC address changes */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38) )
+	if ( dev->start) {
+		return -EBUSY;
+	}
+#else
+	if (netif_running(dev)) {
+		return -EBUSY;
+	}
+#endif
+
+	/* Set up some convenience pointers. */
+	mibattr = &dot11req.mibattribute;
+	macaddr = (p80211item_pstr6_t*)&mibattr->data;
+	resultcode = &dot11req.resultcode;
+
+	/* Set up a dot11req_mibset */
+	memset(&dot11req, 0, sizeof(p80211msg_dot11req_mibset_t));
+	dot11req.msgcode = DIDmsg_dot11req_mibset;
+	dot11req.msglen = sizeof(p80211msg_dot11req_mibset_t);
+	memcpy(dot11req.devname,
+		((wlandevice_t*)(dev->priv))->name,
+		WLAN_DEVNAMELEN_MAX - 1);
+
+	/* Set up the mibattribute argument */
+	mibattr->did = DIDmsg_dot11req_mibset_mibattribute;
+	mibattr->status = P80211ENUM_msgitem_status_data_ok;
+	mibattr->len = sizeof(mibattr->data);
+
+	macaddr->did = DIDmib_dot11mac_dot11OperationTable_dot11MACAddress;
+	macaddr->status = P80211ENUM_msgitem_status_data_ok;
+	macaddr->len = sizeof(macaddr->data);
+	macaddr->data.len = WLAN_ADDR_LEN;
+	memcpy(&macaddr->data.data, new_addr->sa_data, WLAN_ADDR_LEN);
+
+	/* Set up the resultcode argument */
+	resultcode->did = DIDmsg_dot11req_mibset_resultcode;
+	resultcode->status = P80211ENUM_msgitem_status_no_value;
+	resultcode->len = sizeof(resultcode->data);
+	resultcode->data = 0;
+
+	/* now fire the request */
+	result = p80211req_dorequest(dev->priv, (UINT8*)&dot11req);
+
+	/* If the request wasn't successful, report an error and don't
+	 * change the netdev address
+	 */
+	if ( result != 0 || resultcode->data != P80211ENUM_resultcode_success) {
+		WLAN_LOG_ERROR(
+		"Low-level driver failed dot11req_mibset(dot11MACAddress).\n");
+		result = -EADDRNOTAVAIL;
+	} else {
+		/* everything's ok, change the addr in netdev */
+		memcpy(dev->dev_addr, new_addr->sa_data, dev->addr_len);
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+static int wlan_change_mtu(netdevice_t *dev, int new_mtu)
+{
+	DBFENTER;
+	// 2312 is max 802.11 payload, 20 is overhead, (ether + llc +snap)
+	// and another 8 for wep.
+        if ( (new_mtu < 68) || (new_mtu > (2312 - 20 - 8)))
+                return -EINVAL;
+
+        dev->mtu = new_mtu;
+
+	DBFEXIT;
+
+        return 0;
+}
+
+
+
+/*----------------------------------------------------------------
+* wlan_setup
+*
+* Roughly matches the functionality of ether_setup.  Here
+* we set up any members of the wlandevice structure that are common
+* to all devices.  Additionally, we allocate a linux 'struct device'
+* and perform the same setup as ether_setup.
+*
+* Note: It's important that the caller have setup the wlandev->name
+*	ptr prior to calling this function.
+*
+* Arguments:
+*	wlandev		ptr to the wlandev structure for the
+*			interface.
+* Returns:
+*	zero on success, non-zero otherwise.
+* Call Context:
+*	Should be process thread.  We'll assume it might be
+*	interrupt though.  When we add support for statically
+*	compiled drivers, this function will be called in the
+*	context of the kernel startup code.
+----------------------------------------------------------------*/
+int wlan_setup(wlandevice_t *wlandev)
+{
+	int		result = 0;
+	netdevice_t	*dev;
+
+	DBFENTER;
+
+	/* Set up the wlandev */
+	wlandev->state = WLAN_DEVICE_CLOSED;
+	wlandev->ethconv = WLAN_ETHCONV_8021h;
+	wlandev->macmode = WLAN_MACMODE_NONE;
+
+	/* Set up the rx queue */
+	skb_queue_head_init(&wlandev->nsd_rxq);
+	tasklet_init(&wlandev->rx_bh,
+		     p80211netdev_rx_bh,
+		     (unsigned long)wlandev);
+
+	/* Allocate and initialize the struct device */
+	dev = kmalloc(sizeof(netdevice_t), GFP_ATOMIC);
+	if ( dev == NULL ) {
+		WLAN_LOG_ERROR("Failed to alloc netdev.\n");
+		result = 1;
+	} else {
+		memset( dev, 0, sizeof(netdevice_t));
+		ether_setup(dev);
+		wlandev->netdev = dev;
+		dev->priv = wlandev;
+		dev->hard_start_xmit =	p80211knetdev_hard_start_xmit;
+		dev->get_stats =	p80211knetdev_get_stats;
+#ifdef HAVE_PRIVATE_IOCTL
+		dev->do_ioctl = 	p80211knetdev_do_ioctl;
+#endif
+#ifdef HAVE_MULTICAST
+		dev->set_multicast_list = p80211knetdev_set_multicast_list;
+#endif
+		dev->init =		p80211knetdev_init;
+		dev->open =		p80211knetdev_open;
+		dev->stop =		p80211knetdev_stop;
+
+#ifdef CONFIG_NET_WIRELESS
+#if ((WIRELESS_EXT < 17) && (WIRELESS_EXT < 21))
+		dev->get_wireless_stats = p80211wext_get_wireless_stats;
+#endif
+#if WIRELESS_EXT > 12
+		dev->wireless_handlers = &p80211wext_handler_def;
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38) )
+		dev->tbusy = 1;
+		dev->start = 0;
+#else
+		netif_stop_queue(dev);
+#endif
+#ifdef HAVE_CHANGE_MTU
+		dev->change_mtu = wlan_change_mtu;
+#endif
+#ifdef HAVE_SET_MAC_ADDR
+		dev->set_mac_address =	p80211knetdev_set_mac_address;
+#endif
+#ifdef HAVE_TX_TIMEOUT
+		dev->tx_timeout      =  &p80211knetdev_tx_timeout;
+		dev->watchdog_timeo  =  (wlan_watchdog * HZ) / 1000;
+#endif
+		netif_carrier_off(dev);
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* wlan_unsetup
+*
+* This function is paired with the wlan_setup routine.  It should
+* be called after unregister_wlandev.  Basically, all it does is
+* free the 'struct device' that's associated with the wlandev.
+* We do it here because the 'struct device' isn't allocated
+* explicitly in the driver code, it's done in wlan_setup.  To
+* do the free in the driver might seem like 'magic'.
+*
+* Arguments:
+*	wlandev		ptr to the wlandev structure for the
+*			interface.
+* Returns:
+*	zero on success, non-zero otherwise.
+* Call Context:
+*	Should be process thread.  We'll assume it might be
+*	interrupt though.  When we add support for statically
+*	compiled drivers, this function will be called in the
+*	context of the kernel startup code.
+----------------------------------------------------------------*/
+int wlan_unsetup(wlandevice_t *wlandev)
+{
+	int		result = 0;
+
+	DBFENTER;
+
+	tasklet_kill(&wlandev->rx_bh);
+
+	if (wlandev->netdev == NULL ) {
+		WLAN_LOG_ERROR("called without wlandev->netdev set.\n");
+		result = 1;
+	} else {
+		free_netdev(wlandev->netdev);
+		wlandev->netdev = NULL;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+
+
+/*----------------------------------------------------------------
+* register_wlandev
+*
+* Roughly matches the functionality of register_netdev.  This function
+* is called after the driver has successfully probed and set up the
+* resources for the device.  It's now ready to become a named device
+* in the Linux system.
+*
+* First we allocate a name for the device (if not already set), then
+* we call the Linux function register_netdevice.
+*
+* Arguments:
+*	wlandev		ptr to the wlandev structure for the
+*			interface.
+* Returns:
+*	zero on success, non-zero otherwise.
+* Call Context:
+*	Can be either interrupt or not.
+----------------------------------------------------------------*/
+int register_wlandev(wlandevice_t *wlandev)
+{
+	int		i = 0;
+	netdevice_t	*dev = wlandev->netdev;
+
+	DBFENTER;
+
+	i = dev_alloc_name(wlandev->netdev, "wlan%d");
+	if (i >= 0) {
+		i = register_netdev(wlandev->netdev);
+	}
+	if (i != 0) {
+		return -EIO;
+	}
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) )
+	dev->name = wlandev->name;
+#else
+	strcpy(wlandev->name, dev->name);
+#endif
+
+#ifdef CONFIG_PROC_FS
+	if (proc_p80211) {
+		wlandev->procdir = proc_mkdir(wlandev->name, proc_p80211);
+		if ( wlandev->procdir )
+			wlandev->procwlandev =
+				create_proc_read_entry("wlandev", 0,
+						       wlandev->procdir,
+						       p80211netdev_proc_read,
+						       wlandev);
+		if (wlandev->nsd_proc_read)
+			create_proc_read_entry("nsd", 0,
+					       wlandev->procdir,
+					       wlandev->nsd_proc_read,
+					       wlandev);
+	}
+#endif
+
+#ifdef CONFIG_HOTPLUG
+	p80211_run_sbin_hotplug(wlandev, WLAN_HOTPLUG_REGISTER);
+#endif
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* unregister_wlandev
+*
+* Roughly matches the functionality of unregister_netdev.  This
+* function is called to remove a named device from the system.
+*
+* First we tell linux that the device should no longer exist.
+* Then we remove it from the list of known wlan devices.
+*
+* Arguments:
+*	wlandev		ptr to the wlandev structure for the
+*			interface.
+* Returns:
+*	zero on success, non-zero otherwise.
+* Call Context:
+*	Can be either interrupt or not.
+----------------------------------------------------------------*/
+int unregister_wlandev(wlandevice_t *wlandev)
+{
+	struct sk_buff *skb;
+
+	DBFENTER;
+
+#ifdef CONFIG_HOTPLUG
+	p80211_run_sbin_hotplug(wlandev, WLAN_HOTPLUG_REMOVE);
+#endif
+
+#ifdef CONFIG_PROC_FS
+	if ( wlandev->procwlandev ) {
+		remove_proc_entry("wlandev", wlandev->procdir);
+	}
+	if ( wlandev->nsd_proc_read ) {
+		remove_proc_entry("nsd", wlandev->procdir);
+	}
+	if (wlandev->procdir) {
+		remove_proc_entry(wlandev->name, proc_p80211);
+	}
+#endif
+
+	unregister_netdev(wlandev->netdev);
+
+	/* Now to clean out the rx queue */
+	while ( (skb = skb_dequeue(&wlandev->nsd_rxq)) ) {
+		dev_kfree_skb(skb);
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+#ifdef CONFIG_PROC_FS
+/*----------------------------------------------------------------
+* proc_read
+*
+* Read function for /proc/net/p80211/<device>/wlandev
+*
+* Arguments:
+*	buf
+*	start
+*	offset
+*	count
+*	eof
+*	data
+* Returns:
+*	zero on success, non-zero otherwise.
+* Call Context:
+*	Can be either interrupt or not.
+----------------------------------------------------------------*/
+static int
+p80211netdev_proc_read(
+	char	*page,
+	char	**start,
+	off_t	offset,
+	int	count,
+	int	*eof,
+	void	*data)
+{
+	char	 *p = page;
+	wlandevice_t *wlandev = (wlandevice_t *) data;
+
+	DBFENTER;
+	if (offset != 0) {
+		*eof = 1;
+		goto exit;
+	}
+
+	p += sprintf(p, "p80211 version: %s (%s)\n\n",
+		     WLAN_RELEASE, WLAN_BUILD_DATE);
+	p += sprintf(p, "name       : %s\n", wlandev->name);
+	p += sprintf(p, "nsd name   : %s\n", wlandev->nsdname);
+	p += sprintf(p, "address    : %02x:%02x:%02x:%02x:%02x:%02x\n",
+		     wlandev->netdev->dev_addr[0], wlandev->netdev->dev_addr[1], wlandev->netdev->dev_addr[2],
+		     wlandev->netdev->dev_addr[3], wlandev->netdev->dev_addr[4], wlandev->netdev->dev_addr[5]);
+	p += sprintf(p, "nsd caps   : %s%s%s%s%s%s%s%s%s%s\n",
+		     (wlandev->nsdcaps & P80211_NSDCAP_HARDWAREWEP) ? "wep_hw " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_TIEDWEP) ? "wep_tied " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_NOHOSTWEP) ? "wep_hw_only " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_PBCC) ? "pbcc " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_SHORT_PREAMBLE) ? "short_preamble " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_AGILITY) ? "agility " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_AP_RETRANSMIT) ? "ap_retransmit " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_HWFRAGMENT) ? "hw_frag " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_AUTOJOIN) ? "autojoin " : "",
+		     (wlandev->nsdcaps & P80211_NSDCAP_NOSCAN) ? "" : "scan ");
+
+
+	p += sprintf(p, "bssid      : %02x:%02x:%02x:%02x:%02x:%02x\n",
+		     wlandev->bssid[0], wlandev->bssid[1], wlandev->bssid[2],
+		     wlandev->bssid[3], wlandev->bssid[4], wlandev->bssid[5]);
+
+	p += sprintf(p, "Enabled    : %s%s\n",
+		     (wlandev->shortpreamble) ? "short_preamble " : "",
+		     (wlandev->hostwep & HOSTWEP_PRIVACYINVOKED) ? "privacy" : "");
+
+
+ exit:
+	DBFEXIT;
+	return (p - page);
+}
+#endif
+
+/*----------------------------------------------------------------
+* p80211netdev_hwremoved
+*
+* Hardware removed notification. This function should be called
+* immediately after an MSD has detected that the underlying hardware
+* has been yanked out from under us.  The primary things we need
+* to do are:
+*   - Mark the wlandev
+*   - Prevent any further traffic from the knetdev i/f
+*   - Prevent any further requests from mgmt i/f
+*   - If there are any waitq'd mgmt requests or mgmt-frame exchanges,
+*     shut them down.
+*   - Call the MSD hwremoved function.
+*
+* The remainder of the cleanup will be handled by unregister().
+* Our primary goal here is to prevent as much tickling of the MSD
+* as possible since the MSD is already in a 'wounded' state.
+*
+* TODO: As new features are added, this function should be
+*       updated.
+*
+* Arguments:
+*	wlandev		WLAN network device structure
+* Returns:
+*	nothing
+* Side effects:
+*
+* Call context:
+*	Usually interrupt.
+----------------------------------------------------------------*/
+void p80211netdev_hwremoved(wlandevice_t *wlandev)
+{
+	DBFENTER;
+	wlandev->hwremoved = 1;
+	if ( wlandev->state == WLAN_DEVICE_OPEN) {
+		p80211netdev_stop_queue(wlandev);
+	}
+
+	netif_device_detach(wlandev->netdev);
+
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* p80211_rx_typedrop
+*
+* Classifies the frame, increments the appropriate counter, and
+* returns 0|1|2 indicating whether the driver should handle, ignore, or
+* drop the frame
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	fc		frame control field
+*
+* Returns:
+*	zero if the frame should be handled by the driver,
+*       one if the frame should be ignored
+*       anything else means we drop it.
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static int p80211_rx_typedrop( wlandevice_t *wlandev, UINT16 fc)
+{
+	UINT16	ftype;
+	UINT16	fstype;
+	int	drop = 0;
+	/* Classify frame, increment counter */
+	ftype = WLAN_GET_FC_FTYPE(fc);
+	fstype = WLAN_GET_FC_FSTYPE(fc);
+#if 0
+	WLAN_LOG_DEBUG(4,
+		"rx_typedrop : ftype=%d fstype=%d.\n", ftype, fstype);
+#endif
+	switch ( ftype ) {
+	case WLAN_FTYPE_MGMT:
+		if ((wlandev->netdev->flags & IFF_PROMISC) ||
+			(wlandev->netdev->flags & IFF_ALLMULTI)) {
+			drop = 1;
+			break;
+		}
+		WLAN_LOG_DEBUG(3, "rx'd mgmt:\n");
+		wlandev->rx.mgmt++;
+		switch( fstype ) {
+		case WLAN_FSTYPE_ASSOCREQ:
+			/* printk("assocreq"); */
+			wlandev->rx.assocreq++;
+			break;
+		case WLAN_FSTYPE_ASSOCRESP:
+			/* printk("assocresp"); */
+			wlandev->rx.assocresp++;
+			break;
+		case WLAN_FSTYPE_REASSOCREQ:
+			/* printk("reassocreq"); */
+			wlandev->rx.reassocreq++;
+			break;
+		case WLAN_FSTYPE_REASSOCRESP:
+			/* printk("reassocresp"); */
+			wlandev->rx.reassocresp++;
+			break;
+		case WLAN_FSTYPE_PROBEREQ:
+			/* printk("probereq"); */
+			wlandev->rx.probereq++;
+			break;
+		case WLAN_FSTYPE_PROBERESP:
+			/* printk("proberesp"); */
+			wlandev->rx.proberesp++;
+			break;
+		case WLAN_FSTYPE_BEACON:
+			/* printk("beacon"); */
+			wlandev->rx.beacon++;
+			break;
+		case WLAN_FSTYPE_ATIM:
+			/* printk("atim"); */
+			wlandev->rx.atim++;
+			break;
+		case WLAN_FSTYPE_DISASSOC:
+			/* printk("disassoc"); */
+			wlandev->rx.disassoc++;
+			break;
+		case WLAN_FSTYPE_AUTHEN:
+			/* printk("authen"); */
+			wlandev->rx.authen++;
+			break;
+		case WLAN_FSTYPE_DEAUTHEN:
+			/* printk("deauthen"); */
+			wlandev->rx.deauthen++;
+			break;
+		default:
+			/* printk("unknown"); */
+			wlandev->rx.mgmt_unknown++;
+			break;
+		}
+		/* printk("\n"); */
+		drop = 2;
+		break;
+
+	case WLAN_FTYPE_CTL:
+		if ((wlandev->netdev->flags & IFF_PROMISC) ||
+			(wlandev->netdev->flags & IFF_ALLMULTI)) {
+			drop = 1;
+			break;
+		}
+		WLAN_LOG_DEBUG(3, "rx'd ctl:\n");
+		wlandev->rx.ctl++;
+		switch( fstype ) {
+		case WLAN_FSTYPE_PSPOLL:
+			/* printk("pspoll"); */
+			wlandev->rx.pspoll++;
+			break;
+		case WLAN_FSTYPE_RTS:
+			/* printk("rts"); */
+			wlandev->rx.rts++;
+			break;
+		case WLAN_FSTYPE_CTS:
+			/* printk("cts"); */
+			wlandev->rx.cts++;
+			break;
+		case WLAN_FSTYPE_ACK:
+			/* printk("ack"); */
+			wlandev->rx.ack++;
+			break;
+		case WLAN_FSTYPE_CFEND:
+			/* printk("cfend"); */
+			wlandev->rx.cfend++;
+			break;
+		case WLAN_FSTYPE_CFENDCFACK:
+			/* printk("cfendcfack"); */
+			wlandev->rx.cfendcfack++;
+			break;
+		default:
+			/* printk("unknown"); */
+			wlandev->rx.ctl_unknown++;
+			break;
+		}
+		/* printk("\n"); */
+		drop = 2;
+		break;
+
+	case WLAN_FTYPE_DATA:
+		wlandev->rx.data++;
+		switch( fstype ) {
+		case WLAN_FSTYPE_DATAONLY:
+			wlandev->rx.dataonly++;
+			break;
+		case WLAN_FSTYPE_DATA_CFACK:
+			wlandev->rx.data_cfack++;
+			break;
+		case WLAN_FSTYPE_DATA_CFPOLL:
+			wlandev->rx.data_cfpoll++;
+			break;
+		case WLAN_FSTYPE_DATA_CFACK_CFPOLL:
+			wlandev->rx.data__cfack_cfpoll++;
+			break;
+		case WLAN_FSTYPE_NULL:
+			WLAN_LOG_DEBUG(3, "rx'd data:null\n");
+			wlandev->rx.null++;
+			break;
+		case WLAN_FSTYPE_CFACK:
+			WLAN_LOG_DEBUG(3, "rx'd data:cfack\n");
+			wlandev->rx.cfack++;
+			break;
+		case WLAN_FSTYPE_CFPOLL:
+			WLAN_LOG_DEBUG(3, "rx'd data:cfpoll\n");
+			wlandev->rx.cfpoll++;
+			break;
+		case WLAN_FSTYPE_CFACK_CFPOLL:
+			WLAN_LOG_DEBUG(3, "rx'd data:cfack_cfpoll\n");
+			wlandev->rx.cfack_cfpoll++;
+			break;
+		default:
+			/* printk("unknown"); */
+			wlandev->rx.data_unknown++;
+			break;
+		}
+
+		break;
+	}
+	return drop;
+}
+
+#ifdef CONFIG_HOTPLUG
+/* Notify userspace when a netdevice event occurs,
+ * by running '/sbin/hotplug net' with certain
+ * environment variables set.
+ */
+int p80211_run_sbin_hotplug(wlandevice_t *wlandev, char *action)
+{
+        char *argv[3], *envp[7], ifname[12 + IFNAMSIZ], action_str[32];
+	char nsdname[32], wlan_wext[32];
+        int i;
+
+	if (wlandev) {
+		sprintf(ifname, "INTERFACE=%s", wlandev->name);
+		sprintf(nsdname, "NSDNAME=%s", wlandev->nsdname);
+	} else {
+		sprintf(ifname, "INTERFACE=null");
+		sprintf(nsdname, "NSDNAME=null");
+	}
+
+	sprintf(wlan_wext, "WLAN_WEXT=%s", wlan_wext_write ? "y" : "");
+        sprintf(action_str, "ACTION=%s", action);
+
+        i = 0;
+        argv[i++] = hotplug_path;
+        argv[i++] = "wlan";
+        argv[i] = NULL;
+
+        i = 0;
+        /* minimal command environment */
+        envp [i++] = "HOME=/";
+        envp [i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+        envp [i++] = ifname;
+        envp [i++] = action_str;
+        envp [i++] = nsdname;
+        envp [i++] = wlan_wext;
+        envp [i] = NULL;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,62))
+        return call_usermodehelper(argv [0], argv, envp);
+#else
+        return call_usermodehelper(argv [0], argv, envp, 0);
+#endif
+}
+
+#endif
+
+
+void    p80211_suspend(wlandevice_t *wlandev)
+{
+	DBFENTER;
+
+#ifdef CONFIG_HOTPLUG
+	p80211_run_sbin_hotplug(wlandev, WLAN_HOTPLUG_SUSPEND);
+#endif
+
+	DBFEXIT;
+}
+
+void    p80211_resume(wlandevice_t *wlandev)
+{
+	DBFENTER;
+
+#ifdef CONFIG_HOTPLUG
+	p80211_run_sbin_hotplug(wlandev, WLAN_HOTPLUG_RESUME);
+#endif
+
+	DBFEXIT;
+}
+
+static void p80211knetdev_tx_timeout( netdevice_t *netdev)
+{
+	wlandevice_t	*wlandev = (wlandevice_t*)netdev->priv;
+	DBFENTER;
+
+	if (wlandev->tx_timeout) {
+		wlandev->tx_timeout(wlandev);
+	} else {
+		WLAN_LOG_WARNING("Implement tx_timeout for %s\n",
+				 wlandev->nsdname);
+		p80211netdev_wake_queue(wlandev);
+	}
+
+	DBFEXIT;
+}
diff --git a/drivers/staging/wlan-ng/p80211netdev.h b/drivers/staging/wlan-ng/p80211netdev.h
new file mode 100644
index 0000000..9b2e0cd
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211netdev.h
@@ -0,0 +1,336 @@
+/* p80211netdev.h
+*
+* WLAN net device structure and functions
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares the structure type that represents each wlan
+* interface.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _LINUX_P80211NETDEV_H
+#define _LINUX_P80211NETDEV_H
+
+#include <linux/interrupt.h>
+#include <linux/wireless.h>
+
+/*================================================================*/
+/* Constants */
+
+#define WLAN_DEVICE_CLOSED	0
+#define WLAN_DEVICE_OPEN	1
+
+#define WLAN_MACMODE_NONE	0
+#define WLAN_MACMODE_IBSS_STA	1
+#define WLAN_MACMODE_ESS_STA	2
+#define WLAN_MACMODE_ESS_AP	3
+
+/* MSD States */
+#define WLAN_MSD_START			-1
+#define WLAN_MSD_DRIVERLOADED		0
+#define WLAN_MSD_HWPRESENT_PENDING	1
+#define WLAN_MSD_HWFAIL			2
+#define WLAN_MSD_HWPRESENT		3
+#define WLAN_MSD_FWLOAD_PENDING		4
+#define WLAN_MSD_FWLOAD			5
+#define WLAN_MSD_RUNNING_PENDING	6
+#define WLAN_MSD_RUNNING		7
+
+#ifndef ETH_P_ECONET
+#define ETH_P_ECONET   0x0018    /* needed for 2.2.x kernels */
+#endif
+
+#define ETH_P_80211_RAW        (ETH_P_ECONET + 1)
+
+#ifndef ARPHRD_IEEE80211
+#define ARPHRD_IEEE80211 801     /* kernel 2.4.6 */
+#endif
+
+#ifndef ARPHRD_IEEE80211_PRISM  /* kernel 2.4.18 */
+#define ARPHRD_IEEE80211_PRISM 802
+#endif
+
+/*--- NSD Capabilities Flags ------------------------------*/
+#define P80211_NSDCAP_HARDWAREWEP           0x01  /* hardware wep engine */
+#define P80211_NSDCAP_TIEDWEP               0x02  /* can't decouple en/de */
+#define P80211_NSDCAP_NOHOSTWEP             0x04  /* must use hardware wep */
+#define P80211_NSDCAP_PBCC                  0x08  /* hardware supports PBCC */
+#define P80211_NSDCAP_SHORT_PREAMBLE        0x10  /* hardware supports */
+#define P80211_NSDCAP_AGILITY               0x20  /* hardware supports */
+#define P80211_NSDCAP_AP_RETRANSMIT         0x40  /* nsd handles retransmits */
+#define P80211_NSDCAP_HWFRAGMENT            0x80  /* nsd handles frag/defrag */
+#define P80211_NSDCAP_AUTOJOIN              0x100  /* nsd does autojoin */
+#define P80211_NSDCAP_NOSCAN                0x200  /* nsd can scan */
+
+/*================================================================*/
+/* Macros */
+
+/*================================================================*/
+/* Types */
+
+/* Received frame statistics */
+typedef struct p80211_frmrx_t
+{
+	UINT32	mgmt;
+	UINT32	assocreq;
+	UINT32	assocresp;
+	UINT32	reassocreq;
+	UINT32	reassocresp;
+	UINT32	probereq;
+	UINT32	proberesp;
+	UINT32	beacon;
+	UINT32	atim;
+	UINT32	disassoc;
+	UINT32	authen;
+	UINT32	deauthen;
+	UINT32	mgmt_unknown;
+	UINT32	ctl;
+	UINT32	pspoll;
+	UINT32	rts;
+	UINT32	cts;
+	UINT32	ack;
+	UINT32	cfend;
+	UINT32	cfendcfack;
+	UINT32	ctl_unknown;
+	UINT32	data;
+	UINT32	dataonly;
+	UINT32	data_cfack;
+	UINT32	data_cfpoll;
+	UINT32	data__cfack_cfpoll;
+	UINT32	null;
+	UINT32	cfack;
+	UINT32	cfpoll;
+	UINT32	cfack_cfpoll;
+	UINT32	data_unknown;
+	UINT32  decrypt;
+	UINT32  decrypt_err;
+} p80211_frmrx_t;
+
+#ifdef WIRELESS_EXT
+/* called by /proc/net/wireless */
+struct iw_statistics* p80211wext_get_wireless_stats(netdevice_t *dev);
+/* wireless extensions' ioctls */
+int p80211wext_support_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd);
+#if WIRELESS_EXT > 12
+extern struct iw_handler_def p80211wext_handler_def;
+#endif
+
+int p80211wext_event_associated(struct wlandevice *wlandev, int assoc);
+
+#endif /* wireless extensions */
+
+/* WEP stuff */
+#define NUM_WEPKEYS 4
+#define MAX_KEYLEN 32
+
+#define HOSTWEP_DEFAULTKEY_MASK (BIT1|BIT0)
+#define HOSTWEP_DECRYPT  BIT4
+#define HOSTWEP_ENCRYPT  BIT5
+#define HOSTWEP_PRIVACYINVOKED BIT6
+#define HOSTWEP_EXCLUDEUNENCRYPTED BIT7
+
+extern int wlan_watchdog;
+extern int wlan_wext_write;
+
+/* WLAN device type */
+typedef struct wlandevice
+{
+	struct wlandevice	*next;		/* link for list of devices */
+	void			*priv;		/* private data for MSD */
+
+	/* Subsystem State */
+	char		name[WLAN_DEVNAMELEN_MAX]; /* Dev name, from register_wlandev()*/
+	char		*nsdname;
+
+	UINT32          state;          /* Device I/F state (open/closed) */
+	UINT32		msdstate;	/* state of underlying driver */
+	UINT32		hwremoved;	/* Has the hw been yanked out? */
+
+	/* Hardware config */
+	UINT		irq;
+	UINT		iobase;
+	UINT		membase;
+	UINT32          nsdcaps;  /* NSD Capabilities flags */
+
+	/* Config vars */
+	UINT		ethconv;
+
+	/* device methods (init by MSD, used by p80211 */
+	int		(*open)(struct wlandevice *wlandev);
+	int		(*close)(struct wlandevice *wlandev);
+	void		(*reset)(struct wlandevice *wlandev );
+	int		(*txframe)(struct wlandevice *wlandev, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep);
+	int		(*mlmerequest)(struct wlandevice *wlandev, p80211msg_t *msg);
+	int             (*set_multicast_list)(struct wlandevice *wlandev,
+					      netdevice_t *dev);
+	void		(*tx_timeout)(struct wlandevice *wlandev);
+
+#ifdef CONFIG_PROC_FS
+	int             (*nsd_proc_read)(char *page, char **start, off_t offset, int count, int	*eof, void *data);
+#endif
+
+	/* 802.11 State */
+	UINT8		bssid[WLAN_BSSID_LEN];
+	p80211pstr32_t	ssid;
+	UINT32		macmode;
+	int             linkstatus;
+	int             shortpreamble;  /* C bool */
+
+	/* WEP State */
+	UINT8 wep_keys[NUM_WEPKEYS][MAX_KEYLEN];
+	UINT8 wep_keylens[NUM_WEPKEYS];
+	int   hostwep;
+
+	/* Request/Confirm i/f state (used by p80211) */
+	unsigned long		request_pending; /* flag, access atomically */
+
+	/* netlink socket */
+	/* queue for indications waiting for cmd completion */
+	/* Linux netdevice and support */
+	netdevice_t		*netdev;	/* ptr to linux netdevice */
+	struct net_device_stats linux_stats;
+
+#ifdef CONFIG_PROC_FS
+	/* Procfs support */
+	struct proc_dir_entry	*procdir;
+	struct proc_dir_entry	*procwlandev;
+#endif
+
+	/* Rx bottom half */
+	struct tasklet_struct	rx_bh;
+
+	struct sk_buff_head	nsd_rxq;
+
+	/* 802.11 device statistics */
+	struct p80211_frmrx_t	rx;
+
+/* compatibility to wireless extensions */
+#ifdef WIRELESS_EXT
+	struct iw_statistics	wstats;
+
+	/* jkriegl: iwspy fields */
+        UINT8			spy_number;
+        char			spy_address[IW_MAX_SPY][ETH_ALEN];
+        struct iw_quality       spy_stat[IW_MAX_SPY];
+
+#endif
+
+} wlandevice_t;
+
+/* WEP stuff */
+int wep_change_key(wlandevice_t *wlandev, int keynum, UINT8* key, int keylen);
+int wep_decrypt(wlandevice_t *wlandev, UINT8 *buf, UINT32 len, int key_override, UINT8 *iv, UINT8 *icv);
+int wep_encrypt(wlandevice_t *wlandev, UINT8 *buf, UINT8 *dst, UINT32 len, int keynum, UINT8 *iv, UINT8 *icv);
+
+/*================================================================*/
+/* Externs */
+
+/*================================================================*/
+/* Function Declarations */
+
+void	p80211netdev_startup(void);
+void	p80211netdev_shutdown(void);
+int	wlan_setup(wlandevice_t *wlandev);
+int	wlan_unsetup(wlandevice_t *wlandev);
+int	register_wlandev(wlandevice_t *wlandev);
+int	unregister_wlandev(wlandevice_t *wlandev);
+void	p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb);
+void	p80211netdev_hwremoved(wlandevice_t *wlandev);
+void    p80211_suspend(wlandevice_t *wlandev);
+void    p80211_resume(wlandevice_t *wlandev);
+
+/*================================================================*/
+/* Function Definitions */
+
+static inline void
+p80211netdev_stop_queue(wlandevice_t *wlandev)
+{
+	if ( !wlandev ) return;
+	if ( !wlandev->netdev ) return;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38) )
+	wlandev->netdev->tbusy = 1;
+	wlandev->netdev->start = 0;
+#else
+	netif_stop_queue(wlandev->netdev);
+#endif
+}
+
+static inline void
+p80211netdev_start_queue(wlandevice_t *wlandev)
+{
+	if ( !wlandev ) return;
+	if ( !wlandev->netdev ) return;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38) )
+	wlandev->netdev->tbusy = 0;
+	wlandev->netdev->start = 1;
+#else
+	netif_start_queue(wlandev->netdev);
+#endif
+}
+
+static inline void
+p80211netdev_wake_queue(wlandevice_t *wlandev)
+{
+	if ( !wlandev ) return;
+	if ( !wlandev->netdev ) return;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38) )
+	wlandev->netdev->tbusy = 0;
+	mark_bh(NET_BH);
+#else
+	netif_wake_queue(wlandev->netdev);
+#endif
+}
+
+#ifdef CONFIG_HOTPLUG
+#define WLAN_HOTPLUG_REGISTER "register"
+#define WLAN_HOTPLUG_REMOVE   "remove"
+#define WLAN_HOTPLUG_STARTUP  "startup"
+#define WLAN_HOTPLUG_SHUTDOWN "shutdown"
+#define WLAN_HOTPLUG_SUSPEND "suspend"
+#define WLAN_HOTPLUG_RESUME "resume"
+int p80211_run_sbin_hotplug(wlandevice_t *wlandev, char *action);
+#endif
+
+#endif
diff --git a/drivers/staging/wlan-ng/p80211req.c b/drivers/staging/wlan-ng/p80211req.c
new file mode 100644
index 0000000..0233abe
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211req.c
@@ -0,0 +1,329 @@
+/* src/p80211/p80211req.c
+*
+* Request/Indication/MacMgmt interface handling functions
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file contains the functions, types, and macros to support the
+* MLME request interface that's implemented via the device ioctls.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/sock.h>
+#include <linux/netlink.h>
+
+#include "version.h"
+#include "wlan_compat.h"
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211ioctl.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "p80211req.h"
+
+/*================================================================*/
+/* Local Constants */
+
+/* Maximum amount of time we'll wait for a request to complete */
+#define P80211REQ_MAXTIME	3*HZ	/* 3 seconds */
+
+/*================================================================*/
+/* Local Macros */
+
+/*================================================================*/
+/* Local Types */
+
+/*================================================================*/
+/* Local Static Definitions */
+
+/*================================================================*/
+/* Local Function Declarations */
+
+static void p80211req_handlemsg( wlandevice_t *wlandev, p80211msg_t *msg);
+static int p80211req_mibset_mibget(wlandevice_t *wlandev, p80211msg_dot11req_mibget_t *mib_msg, int isget);
+
+/*================================================================*/
+/* Function Definitions */
+
+
+/*----------------------------------------------------------------
+* p80211req_dorequest
+*
+* Handles an MLME reqest/confirm message.
+*
+* Arguments:
+*	wlandev		WLAN device struct
+*	msgbuf		Buffer containing a request message
+*
+* Returns:
+*	0 on success, an errno otherwise
+*
+* Call context:
+*	Potentially blocks the caller, so it's a good idea to
+*	not call this function from an interrupt context.
+----------------------------------------------------------------*/
+int p80211req_dorequest( wlandevice_t *wlandev, UINT8 *msgbuf)
+{
+	int		result = 0;
+	p80211msg_t	*msg = (p80211msg_t*)msgbuf;
+
+	DBFENTER;
+
+	/* Check to make sure the MSD is running */
+	if (
+	!((wlandev->msdstate == WLAN_MSD_HWPRESENT &&
+	msg->msgcode == DIDmsg_lnxreq_ifstate) ||
+	wlandev->msdstate == WLAN_MSD_RUNNING ||
+	wlandev->msdstate == WLAN_MSD_FWLOAD) ) {
+		return -ENODEV;
+	}
+
+	/* Check Permissions */
+	if (!capable(CAP_NET_ADMIN) &&
+	    (msg->msgcode != DIDmsg_dot11req_mibget)) {
+		WLAN_LOG_ERROR("%s: only dot11req_mibget allowed for non-root.\n", wlandev->name);
+		return -EPERM;
+	}
+
+	/* Check for busy status */
+	if ( test_and_set_bit(1, &(wlandev->request_pending))) {
+		return -EBUSY;
+	}
+
+	/* Allow p80211 to look at msg and handle if desired. */
+	/* So far, all p80211 msgs are immediate, no waitq/timer necessary */
+	/* This may change. */
+	p80211req_handlemsg(wlandev, msg);
+
+	/* Pass it down to wlandev via wlandev->mlmerequest */
+	if ( wlandev->mlmerequest != NULL )
+		wlandev->mlmerequest(wlandev, msg);
+
+	clear_bit( 1, &(wlandev->request_pending));
+	DBFEXIT;
+	return result;	/* if result==0, msg->status still may contain an err */
+}
+
+/*----------------------------------------------------------------
+* p80211req_handlemsg
+*
+* p80211 message handler.  Primarily looks for messages that
+* belong to p80211 and then dispatches the appropriate response.
+* TODO: we don't do anything yet.  Once the linuxMIB is better
+*	defined we'll need a get/set handler.
+*
+* Arguments:
+*	wlandev		WLAN device struct
+*	msg		message structure
+*
+* Returns:
+*	nothing (any results are set in the status field of the msg)
+*
+* Call context:
+*	Process thread
+----------------------------------------------------------------*/
+static void p80211req_handlemsg( wlandevice_t *wlandev, p80211msg_t *msg)
+{
+        DBFENTER;
+
+	switch (msg->msgcode) {
+
+	case DIDmsg_lnxreq_hostwep: {
+		p80211msg_lnxreq_hostwep_t *req = (p80211msg_lnxreq_hostwep_t*) msg;
+		wlandev->hostwep &= ~(HOSTWEP_DECRYPT|HOSTWEP_ENCRYPT);
+		if (req->decrypt.data == P80211ENUM_truth_true)
+			wlandev->hostwep |= HOSTWEP_DECRYPT;
+		if (req->encrypt.data == P80211ENUM_truth_true)
+			wlandev->hostwep |= HOSTWEP_ENCRYPT;
+
+		break;
+	}
+	case DIDmsg_dot11req_mibget:
+	case DIDmsg_dot11req_mibset: {
+		int isget = (msg->msgcode == DIDmsg_dot11req_mibget);
+		p80211msg_dot11req_mibget_t  *mib_msg = (p80211msg_dot11req_mibget_t *) msg;
+		p80211req_mibset_mibget (wlandev, mib_msg, isget);
+	}
+	default:
+		// XXX do nothing!
+		;
+	} /* switch msg->msgcode */
+
+	DBFEXIT;
+
+	return;
+}
+
+static int p80211req_mibset_mibget(wlandevice_t *wlandev,
+				   p80211msg_dot11req_mibget_t *mib_msg,
+				   int isget)
+{
+	p80211itemd_t   *mibitem = (p80211itemd_t *) mib_msg->mibattribute.data;
+	p80211pstrd_t  *pstr = (p80211pstrd_t*) mibitem->data;
+	UINT8 *key = mibitem->data + sizeof(p80211pstrd_t);
+
+	DBFENTER;
+
+	switch (mibitem->did) {
+	case DIDmib_dot11smt_p80211Table_p80211_ifstate: {
+		UINT32 *data = (UINT32 *) mibitem->data;
+		if (isget)
+			switch (wlandev->msdstate) {
+			case WLAN_MSD_HWPRESENT:
+				*data = P80211ENUM_ifstate_disable;
+				break;
+			case WLAN_MSD_FWLOAD:
+				*data = P80211ENUM_ifstate_fwload;
+				break;
+			case WLAN_MSD_RUNNING:
+				*data = P80211ENUM_ifstate_enable;
+				break;
+			default:
+				*data = P80211ENUM_ifstate_enable;
+			}
+		break;
+	}
+	case DIDmib_dot11phy_dot11PhyOperationTable_dot11ShortPreambleEnabled: {
+		UINT32 *data = (UINT32 *) mibitem->data;
+
+		if (isget)
+			*data = wlandev->shortpreamble;
+		else
+			wlandev->shortpreamble = *data;
+		break;
+	}
+	case DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0: {
+		if (!isget)
+			wep_change_key(wlandev, 0, key, pstr->len);
+		break;
+	}
+	case DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1: {
+		if (!isget)
+			wep_change_key(wlandev, 1, key, pstr->len);
+		break;
+	}
+	case DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2: {
+		if (!isget)
+			wep_change_key(wlandev, 2, key, pstr->len);
+		break;
+	}
+	case DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3: {
+		if (!isget)
+			wep_change_key(wlandev, 3, key, pstr->len);
+		break;
+	}
+	case DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID: {
+		UINT32 *data = (UINT32 *) mibitem->data;
+
+		if (isget) {
+			*data = wlandev->hostwep & HOSTWEP_DEFAULTKEY_MASK;
+			} else {
+				wlandev->hostwep &= ~(HOSTWEP_DEFAULTKEY_MASK);
+
+				wlandev->hostwep |= (*data & HOSTWEP_DEFAULTKEY_MASK);
+			}
+		break;
+	}
+	case DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked: {
+		UINT32 *data = (UINT32 *) mibitem->data;
+
+		if (isget) {
+			if (wlandev->hostwep & HOSTWEP_PRIVACYINVOKED)
+				*data = P80211ENUM_truth_true;
+			else
+				*data = P80211ENUM_truth_false;
+		} else {
+				wlandev->hostwep &= ~(HOSTWEP_PRIVACYINVOKED);
+				if (*data == P80211ENUM_truth_true)
+					wlandev->hostwep |= HOSTWEP_PRIVACYINVOKED;
+		}
+		break;
+	}
+	case DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted: {
+		UINT32 *data = (UINT32 *) mibitem->data;
+
+		if (isget) {
+			if (wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED)
+				*data = P80211ENUM_truth_true;
+			else
+				*data = P80211ENUM_truth_false;
+		} else {
+			wlandev->hostwep &= ~(HOSTWEP_EXCLUDEUNENCRYPTED);
+			if (*data == P80211ENUM_truth_true)
+				wlandev->hostwep |= HOSTWEP_EXCLUDEUNENCRYPTED;
+		}
+		break;
+	}
+	default:
+		// XXXX do nothing!
+		;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
diff --git a/drivers/staging/wlan-ng/p80211req.h b/drivers/staging/wlan-ng/p80211req.h
new file mode 100644
index 0000000..54abdce
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211req.h
@@ -0,0 +1,68 @@
+/* p80211req.h
+*
+* Request handling functions
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _LINUX_P80211REQ_H
+#define _LINUX_P80211REQ_H
+
+/*================================================================*/
+/* Constants */
+
+/*================================================================*/
+/* Macros */
+
+/*================================================================*/
+/* Types */
+
+/*================================================================*/
+/* Externs */
+
+/*================================================================*/
+/* Function Declarations */
+
+int	p80211req_dorequest(wlandevice_t *wlandev, UINT8 *msgbuf);
+
+#endif
diff --git a/drivers/staging/wlan-ng/p80211types.h b/drivers/staging/wlan-ng/p80211types.h
new file mode 100644
index 0000000..811b0ce
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211types.h
@@ -0,0 +1,675 @@
+/* p80211types.h
+*
+* Macros, constants, types, and funcs for p80211 data types
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file declares some of the constants and types used in various
+* parts of the linux-wlan system.
+*
+* Notes:
+*   - Constant values are always in HOST byte order.
+*
+* All functions and statics declared here are implemented in p80211types.c
+*   --------------------------------------------------------------------
+*/
+
+#ifndef _P80211TYPES_H
+#define _P80211TYPES_H
+
+/*================================================================*/
+/* System Includes */
+/*================================================================*/
+
+/*================================================================*/
+/* Project Includes */
+/*================================================================*/
+
+#ifndef _WLAN_COMPAT_H
+#include "wlan_compat.h"
+#endif
+
+/*================================================================*/
+/* Constants */
+/*================================================================*/
+
+/*----------------------------------------------------------------*/
+/* p80211 data type codes used for MIB items and message */
+/* arguments. The various metadata structures provide additional */
+/* information about these types. */
+
+#define P80211_TYPE_OCTETSTR		1	/* pascal array of bytes */
+#define P80211_TYPE_DISPLAYSTR		2	/* pascal array of bytes containing ascii */
+#define P80211_TYPE_INT			4	/* UINT32 min and max limited by 32 bits */
+#define P80211_TYPE_ENUMINT		5	/* UINT32 holding a numeric
+						   code that can be mapped
+						   to a textual name */
+#define P80211_TYPE_UNKDATA		6	/* Data item containing an
+						   unknown data type */
+#define P80211_TYPE_INTARRAY		7	/* Array of 32-bit integers. */
+#define P80211_TYPE_BITARRAY		8	/* Array of bits. */
+#define P80211_TYPE_MACARRAY		9	/* Array of MAC addresses. */
+
+/*----------------------------------------------------------------*/
+/* The following constants are indexes into the Mib Category List */
+/* and the Message Category List */
+
+/* Mib Category List */
+#define P80211_MIB_CAT_DOT11SMT		1
+#define P80211_MIB_CAT_DOT11MAC		2
+#define P80211_MIB_CAT_DOT11PHY		3
+
+#define P80211SEC_DOT11SMT		P80211_MIB_CAT_DOT11SMT
+#define P80211SEC_DOT11MAC		P80211_MIB_CAT_DOT11MAC
+#define P80211SEC_DOT11PHY		P80211_MIB_CAT_DOT11PHY
+
+/* Message Category List */
+#define P80211_MSG_CAT_DOT11REQ		1
+#define P80211_MSG_CAT_DOT11IND		2
+/* #define P80211_MSG_CAT_DOT11CFM		3 (doesn't exist at this time) */
+
+#define P80211SEC_DOT11REQ		P80211_MSG_CAT_DOT11REQ
+#define P80211SEC_DOT11IND		P80211_MSG_CAT_DOT11IND
+/* #define P80211SEC_DOT11CFM		P80211_MSG_CAT_DOT11CFM  (doesn't exist at this time */
+
+
+
+/*----------------------------------------------------------------*/
+/* p80211 DID field codes that represent access type and */
+/* is_table status. */
+
+#define P80211DID_ACCESS_READ		0x10000000
+#define P80211DID_ACCESS_WRITE		0x08000000
+#define P80211DID_WRITEONLY		0x00000001
+#define P80211DID_READONLY		0x00000002
+#define P80211DID_READWRITE		0x00000003
+#define P80211DID_ISTABLE_FALSE		0
+#define P80211DID_ISTABLE_TRUE		1
+
+/*----------------------------------------------------------------*/
+/* p80211 enumeration constants.  The value to text mappings for */
+/*  these is in p80211types.c.  These defines were generated */
+/*  from the mappings. */
+
+/* error codes for lookups */
+#define P80211ENUM_BAD				0xffffffffUL
+#define P80211ENUM_BADSTR			"P80211ENUM_BAD"
+
+#define P80211ENUM_truth_false			0
+#define P80211ENUM_truth_true			1
+#define P80211ENUM_ifstate_disable		0
+#define P80211ENUM_ifstate_fwload		1
+#define P80211ENUM_ifstate_enable		2
+#define P80211ENUM_powermgmt_active		1
+#define P80211ENUM_powermgmt_powersave		2
+#define P80211ENUM_bsstype_infrastructure	1
+#define P80211ENUM_bsstype_independent		2
+#define P80211ENUM_bsstype_any			3
+#define P80211ENUM_authalg_opensystem		1
+#define P80211ENUM_authalg_sharedkey		2
+#define P80211ENUM_phytype_fhss			1
+#define P80211ENUM_phytype_dsss			2
+#define P80211ENUM_phytype_irbaseband		3
+#define P80211ENUM_temptype_commercial		1
+#define P80211ENUM_temptype_industrial		2
+#define P80211ENUM_regdomain_fcc		16
+#define P80211ENUM_regdomain_doc		32
+#define P80211ENUM_regdomain_etsi		48
+#define P80211ENUM_regdomain_spain		49
+#define P80211ENUM_regdomain_france		50
+#define P80211ENUM_regdomain_mkk		64
+#define P80211ENUM_ccamode_edonly		1
+#define P80211ENUM_ccamode_csonly		2
+#define P80211ENUM_ccamode_edandcs		4
+#define P80211ENUM_ccamode_cswithtimer		8
+#define P80211ENUM_ccamode_hrcsanded		16
+#define P80211ENUM_diversity_fixedlist		1
+#define P80211ENUM_diversity_notsupported	2
+#define P80211ENUM_diversity_dynamic		3
+#define P80211ENUM_scantype_active		1
+#define P80211ENUM_scantype_passive		2
+#define P80211ENUM_scantype_both		3
+#define P80211ENUM_resultcode_success		1
+#define P80211ENUM_resultcode_invalid_parameters	2
+#define P80211ENUM_resultcode_not_supported	3
+#define P80211ENUM_resultcode_timeout		4
+#define P80211ENUM_resultcode_too_many_req	5
+#define P80211ENUM_resultcode_refused		6
+#define P80211ENUM_resultcode_bss_already	7
+#define P80211ENUM_resultcode_invalid_access	8
+#define P80211ENUM_resultcode_invalid_mibattribute	9
+#define P80211ENUM_resultcode_cant_set_readonly_mib	10
+#define P80211ENUM_resultcode_implementation_failure	11
+#define P80211ENUM_resultcode_cant_get_writeonly_mib	12
+#define P80211ENUM_reason_unspec_reason		1
+#define P80211ENUM_reason_auth_not_valid	2
+#define P80211ENUM_reason_deauth_lv_ss		3
+#define P80211ENUM_reason_inactivity		4
+#define P80211ENUM_reason_ap_overload		5
+#define P80211ENUM_reason_class23_err		6
+#define P80211ENUM_reason_class3_err		7
+#define P80211ENUM_reason_disas_lv_ss		8
+#define P80211ENUM_reason_asoc_not_auth		9
+#define P80211ENUM_status_successful		0
+#define P80211ENUM_status_unspec_failure	1
+#define P80211ENUM_status_unsup_cap		10
+#define P80211ENUM_status_reasoc_no_asoc	11
+#define P80211ENUM_status_fail_other		12
+#define P80211ENUM_status_unspt_alg		13
+#define P80211ENUM_status_auth_seq_fail		14
+#define P80211ENUM_status_chlng_fail		15
+#define P80211ENUM_status_auth_timeout		16
+#define P80211ENUM_status_ap_full		17
+#define P80211ENUM_status_unsup_rate		18
+#define P80211ENUM_status_unsup_shortpreamble	19
+#define P80211ENUM_status_unsup_pbcc		20
+#define P80211ENUM_status_unsup_agility		21
+#define P80211ENUM_msgitem_status_data_ok		0
+#define P80211ENUM_msgitem_status_no_value		1
+#define P80211ENUM_msgitem_status_invalid_itemname	2
+#define P80211ENUM_msgitem_status_invalid_itemdata	3
+#define P80211ENUM_msgitem_status_missing_itemdata	4
+#define P80211ENUM_msgitem_status_incomplete_itemdata	5
+#define P80211ENUM_msgitem_status_invalid_msg_did	6
+#define P80211ENUM_msgitem_status_invalid_mib_did	7
+#define P80211ENUM_msgitem_status_missing_conv_func	8
+#define P80211ENUM_msgitem_status_string_too_long	9
+#define P80211ENUM_msgitem_status_data_out_of_range	10
+#define P80211ENUM_msgitem_status_string_too_short	11
+#define P80211ENUM_msgitem_status_missing_valid_func	12
+#define P80211ENUM_msgitem_status_unknown		13
+#define P80211ENUM_msgitem_status_invalid_did		14
+#define P80211ENUM_msgitem_status_missing_print_func	15
+
+#define P80211ENUM_lnxroam_reason_unknown        0
+#define P80211ENUM_lnxroam_reason_beacon         1
+#define P80211ENUM_lnxroam_reason_signal         2
+#define P80211ENUM_lnxroam_reason_txretry        3
+#define P80211ENUM_lnxroam_reason_notjoined      4
+
+#define P80211ENUM_p2preamble_long               0
+#define P80211ENUM_p2preamble_short              2
+#define P80211ENUM_p2preamble_mixed              3
+
+/*----------------------------------------------------------------*/
+/* p80211 max length constants for the different pascal strings. */
+
+#define MAXLEN_PSTR6		(6)	/* pascal array of 6 bytes */
+#define MAXLEN_PSTR14		(14)	/* pascal array of 14 bytes */
+#define MAXLEN_PSTR32		(32)	/* pascal array of 32 bytes */
+#define MAXLEN_PSTR255		(255)	/* pascal array of 255 bytes */
+#define MAXLEN_MIBATTRIBUTE	(392)	/* maximum mibattribute */
+					/* where the size of the DATA itself */
+					/* is a DID-LEN-DATA triple */
+					/* with a max size of 4+4+384 */
+
+#define P80211_SET_INT(item, value) do { \
+	(item).data   = (value); \
+	(item).status = P80211ENUM_msgitem_status_data_ok; \
+	} while(0)
+/*----------------------------------------------------------------*/
+/* string constants */
+
+#define NOT_SET			"NOT_SET"
+#define NOT_SUPPORTED		"NOT_SUPPORTED"
+#define UNKNOWN_DATA		"UNKNOWN_DATA"
+
+
+/*--------------------------------------------------------------------*/
+/*  Metadata flags  */
+
+/* MSM: Do these belong in p80211meta.h? I'm not sure. */
+
+#define ISREQUIRED		(0x80000000UL)
+#define ISREQUEST		(0x40000000UL)
+#define ISCONFIRM		(0x20000000UL)
+
+
+/*================================================================*/
+/* Macros */
+
+/*--------------------------------------------------------------------*/
+/* The following macros are used to manipulate the 'flags' field in   */
+/*  the metadata.  These are only used when the metadata is for       */
+/*  command arguments to determine if the data item is required, and  */
+/*  whether the metadata item is for a request command, confirm       */
+/*  command or both.                                                  */
+/*--------------------------------------------------------------------*/
+/* MSM: Do these belong in p80211meta.h?  I'm not sure */
+
+#define P80211ITEM_SETFLAGS(q, r, c)	( q | r | c )
+
+#define P80211ITEM_ISREQUIRED(flags)	(((UINT32)(flags & ISREQUIRED)) >> 31 )
+#define P80211ITEM_ISREQUEST(flags)	(((UINT32)(flags & ISREQUEST)) >> 30 )
+#define P80211ITEM_ISCONFIRM(flags)	(((UINT32)(flags & ISCONFIRM)) >> 29 )
+
+/*----------------------------------------------------------------*/
+/* The following macro creates a name for an enum */
+
+#define MKENUMNAME(name) p80211enum_ ## name
+
+/*----------------------------------------------------------------
+* The following constants and macros are used to construct and
+* deconstruct the Data ID codes.  The coding is as follows:
+*
+*     ...rwtnnnnnnnniiiiiiggggggssssss      s - Section
+*                                           g - Group
+*                                           i - Item
+*                                           n - Index
+*                                           t - Table flag
+*                                           w - Write flag
+*                                           r - Read flag
+*                                           . - Unused
+*/
+
+#define P80211DID_INVALID		0xffffffffUL
+#define P80211DID_VALID			0x00000000UL
+
+#define P80211DID_LSB_SECTION		(0)
+#define P80211DID_LSB_GROUP		(6)
+#define P80211DID_LSB_ITEM		(12)
+#define P80211DID_LSB_INDEX		(18)
+#define P80211DID_LSB_ISTABLE		(26)
+#define P80211DID_LSB_ACCESS 		(27)
+
+#define P80211DID_MASK_SECTION		(0x0000003fUL)
+#define P80211DID_MASK_GROUP		(0x0000003fUL)
+#define P80211DID_MASK_ITEM		(0x0000003fUL)
+#define P80211DID_MASK_INDEX		(0x000000ffUL)
+#define P80211DID_MASK_ISTABLE		(0x00000001UL)
+#define P80211DID_MASK_ACCESS 		(0x00000003UL)
+
+
+#define P80211DID_MK(a,m,l)	((((UINT32)(a)) & (m)) << (l))
+
+#define P80211DID_MKSECTION(a)	P80211DID_MK(a, \
+					P80211DID_MASK_SECTION, \
+					P80211DID_LSB_SECTION )
+#define P80211DID_MKGROUP(a)	P80211DID_MK(a, \
+					P80211DID_MASK_GROUP, \
+					P80211DID_LSB_GROUP )
+#define P80211DID_MKITEM(a)	P80211DID_MK(a, \
+					P80211DID_MASK_ITEM, \
+					P80211DID_LSB_ITEM )
+#define P80211DID_MKINDEX(a)	P80211DID_MK(a, \
+					P80211DID_MASK_INDEX, \
+					P80211DID_LSB_INDEX )
+#define P80211DID_MKISTABLE(a)	P80211DID_MK(a, \
+					P80211DID_MASK_ISTABLE, \
+					P80211DID_LSB_ISTABLE )
+
+
+#define P80211DID_MKID(s,g,i,n,t,a)	(P80211DID_MKSECTION(s) | \
+						P80211DID_MKGROUP(g) | \
+				 		P80211DID_MKITEM(i) | \
+				 		P80211DID_MKINDEX(n) | \
+						P80211DID_MKISTABLE(t) | \
+						(a) )
+
+
+#define P80211DID_GET(a,m,l)	((((UINT32)(a)) >> (l)) & (m))
+
+#define P80211DID_SECTION(a)	P80211DID_GET(a, \
+					P80211DID_MASK_SECTION, \
+					P80211DID_LSB_SECTION)
+#define P80211DID_GROUP(a)	P80211DID_GET(a, \
+					P80211DID_MASK_GROUP, \
+					P80211DID_LSB_GROUP)
+#define P80211DID_ITEM(a)	P80211DID_GET(a, \
+					P80211DID_MASK_ITEM, \
+					P80211DID_LSB_ITEM)
+#define P80211DID_INDEX(a)	P80211DID_GET(a, \
+					P80211DID_MASK_INDEX, \
+					P80211DID_LSB_INDEX)
+#define P80211DID_ISTABLE(a)	P80211DID_GET(a, \
+					P80211DID_MASK_ISTABLE, \
+					P80211DID_LSB_ISTABLE)
+#define P80211DID_ACCESS(a)	P80211DID_GET(a, \
+					P80211DID_MASK_ACCESS, \
+					P80211DID_LSB_ACCESS)
+
+/*================================================================*/
+/* Types */
+
+/*----------------------------------------------------------------*/
+/* The following structure types are used for the represenation */
+/*  of ENUMINT type metadata. */
+
+typedef struct p80211enumpair
+{
+	UINT32			val;
+	char			*name;
+} p80211enumpair_t;
+
+typedef struct p80211enum
+{
+	INT			nitems;
+	p80211enumpair_t	*list;
+} p80211enum_t;
+
+/*----------------------------------------------------------------*/
+/* The following structure types are used to store data items in */
+/*  messages. */
+
+/* Template pascal string */
+typedef struct p80211pstr
+{
+	UINT8		len;
+} __WLAN_ATTRIB_PACK__ p80211pstr_t;
+
+typedef struct p80211pstrd
+{
+	UINT8		len;
+	UINT8		data[0];
+} __WLAN_ATTRIB_PACK__ p80211pstrd_t;
+
+/* Maximum pascal string */
+typedef struct p80211pstr255
+{
+	UINT8		len;
+	UINT8		data[MAXLEN_PSTR255];
+} __WLAN_ATTRIB_PACK__ p80211pstr255_t;
+
+/* pascal string for macaddress and bssid */
+typedef struct p80211pstr6
+{
+	UINT8		len;
+	UINT8		data[MAXLEN_PSTR6];
+} __WLAN_ATTRIB_PACK__ p80211pstr6_t;
+
+/* pascal string for channel list */
+typedef struct p80211pstr14
+{
+	UINT8		len;
+	UINT8		data[MAXLEN_PSTR14];
+} __WLAN_ATTRIB_PACK__ p80211pstr14_t;
+
+/* pascal string for ssid */
+typedef struct p80211pstr32
+{
+	UINT8		len;
+	UINT8		data[MAXLEN_PSTR32];
+} __WLAN_ATTRIB_PACK__ p80211pstr32_t;
+
+/* MAC address array */
+typedef struct p80211macarray
+{
+	UINT32		cnt;
+	UINT8		data[1][MAXLEN_PSTR6];
+} __WLAN_ATTRIB_PACK__ p80211macarray_t;
+
+/* prototype template */
+typedef struct p80211item
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+} __WLAN_ATTRIB_PACK__ p80211item_t;
+
+/* prototype template w/ data item */
+typedef struct p80211itemd
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+	UINT8		data[0];
+} __WLAN_ATTRIB_PACK__ p80211itemd_t;
+
+/* message data item for INT, BOUNDEDINT, ENUMINT */
+typedef struct p80211item_uint32
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+	UINT32		data;
+} __WLAN_ATTRIB_PACK__ p80211item_uint32_t;
+
+/* message data item for OCTETSTR, DISPLAYSTR */
+typedef struct p80211item_pstr6
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+	p80211pstr6_t	data;
+} __WLAN_ATTRIB_PACK__ p80211item_pstr6_t;
+
+/* message data item for OCTETSTR, DISPLAYSTR */
+typedef struct p80211item_pstr14
+{
+	UINT32			did;
+	UINT16			status;
+	UINT16			len;
+	p80211pstr14_t		data;
+} __WLAN_ATTRIB_PACK__ p80211item_pstr14_t;
+
+/* message data item for OCTETSTR, DISPLAYSTR */
+typedef struct p80211item_pstr32
+{
+	UINT32			did;
+	UINT16			status;
+	UINT16			len;
+	p80211pstr32_t		data;
+} __WLAN_ATTRIB_PACK__ p80211item_pstr32_t;
+
+/* message data item for OCTETSTR, DISPLAYSTR */
+typedef struct p80211item_pstr255
+{
+	UINT32			did;
+	UINT16			status;
+	UINT16			len;
+	p80211pstr255_t		data;
+} __WLAN_ATTRIB_PACK__ p80211item_pstr255_t;
+
+/* message data item for UNK 392, namely mib items */
+typedef struct  p80211item_unk392
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+	UINT8		data[MAXLEN_MIBATTRIBUTE];
+} __WLAN_ATTRIB_PACK__ p80211item_unk392_t;
+
+/* message data item for UNK 1025, namely p2 pdas */
+typedef struct  p80211item_unk1024
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+	UINT8		data[1024];
+}  __WLAN_ATTRIB_PACK__ p80211item_unk1024_t;
+
+/* message data item for UNK 4096, namely p2 download chunks */
+typedef struct  p80211item_unk4096
+{
+	UINT32		did;
+	UINT16		status;
+	UINT16		len;
+	UINT8		data[4096];
+}  __WLAN_ATTRIB_PACK__ p80211item_unk4096_t;
+
+struct catlistitem;
+
+/*----------------------------------------------------------------*/
+/* The following structure type is used to represent all of the */
+/*  metadata items.  Some components may choose to use more, */
+/*  less or different metadata items. */
+
+typedef void (*p80211_totext_t)( struct catlistitem *, UINT32 did, UINT8* itembuf, char *textbuf);
+typedef void (*p80211_fromtext_t)( struct catlistitem *, UINT32 did, UINT8* itembuf, char *textbuf);
+typedef UINT32 (*p80211_valid_t)( struct catlistitem *, UINT32 did, UINT8* itembuf);
+
+
+/*================================================================*/
+/* Extern Declarations */
+
+/*----------------------------------------------------------------*/
+/* Enumeration Lists */
+/*  The following are the external declarations */
+/*  for all enumerations  */
+
+extern p80211enum_t MKENUMNAME(truth);
+extern p80211enum_t MKENUMNAME(ifstate);
+extern p80211enum_t MKENUMNAME(powermgmt);
+extern p80211enum_t MKENUMNAME(bsstype);
+extern p80211enum_t MKENUMNAME(authalg);
+extern p80211enum_t MKENUMNAME(phytype);
+extern p80211enum_t MKENUMNAME(temptype);
+extern p80211enum_t MKENUMNAME(regdomain);
+extern p80211enum_t MKENUMNAME(ccamode);
+extern p80211enum_t MKENUMNAME(diversity);
+extern p80211enum_t MKENUMNAME(scantype);
+extern p80211enum_t MKENUMNAME(resultcode);
+extern p80211enum_t MKENUMNAME(reason);
+extern p80211enum_t MKENUMNAME(status);
+extern p80211enum_t MKENUMNAME(msgcode);
+extern p80211enum_t MKENUMNAME(msgitem_status);
+
+extern p80211enum_t MKENUMNAME(lnxroam_reason);
+
+extern p80211enum_t MKENUMNAME(p2preamble);
+
+/*================================================================*/
+/* Function Declarations */
+
+/*----------------------------------------------------------------*/
+/* The following declare some utility functions for use with the */
+/*  p80211enum_t type. */
+
+UINT32 p80211enum_text2int(p80211enum_t *ep, char *text);
+UINT32 p80211enum_int2text(p80211enum_t *ep, UINT32 val, char *text);
+void p80211_error2text(int err_code, char *err_str);
+
+/*----------------------------------------------------------------*/
+/* The following declare some utility functions for use with the */
+/*  p80211item_t and p80211meta_t types. */
+
+/*----------------------------------------------------------------*/
+/* The following declare functions that perform validation and    */
+/* text to binary conversions based on the metadata for interface */
+/* and MIB data items.                                            */
+/*----------------------------------------------------------------*/
+
+/*-- DISPLAYSTR ------------------------------------------------------*/
+/* pstr ==> cstr */
+void p80211_totext_displaystr( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* cstr ==> pstr */
+void p80211_fromtext_displaystr( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of a displaystr binary value */
+UINT32 p80211_isvalid_displaystr( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- OCTETSTR --------------------------------------------------------*/
+/* pstr ==> "xx:xx:...." */
+void p80211_totext_octetstr( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* "xx:xx:...." ==> pstr */
+void p80211_fromtext_octetstr( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of an octetstr binary value */
+UINT32 p80211_isvalid_octetstr( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- INT -------------------------------------------------------------*/
+/* UINT32 ==> %d */
+void p80211_totext_int( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* %d ==> UINT32 */
+void p80211_fromtext_int( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of an int's binary value (always successful) */
+UINT32 p80211_isvalid_int( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- ENUMINT ---------------------------------------------------------*/
+/* UINT32 ==> <valuename> */
+void p80211_totext_enumint( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* <valuename> ==> UINT32 */
+void p80211_fromtext_enumint( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of an enum's binary value */
+UINT32 p80211_isvalid_enumint( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- INTARRAY --------------------------------------------------------*/
+/* UINT32[] => %d,%d,%d,... */
+void p80211_totext_intarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* %d,%d,%d,... ==> UINT32[] */
+void p80211_fromtext_intarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of an integer array's value */
+UINT32 p80211_isvalid_intarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- BITARRAY --------------------------------------------------------*/
+/* UINT32 ==> %d,%d,%d,... */
+void p80211_totext_bitarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* %d,%d,%d,... ==> UINT32 */
+void p80211_fromtext_bitarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of a bit array's value */
+UINT32 p80211_isvalid_bitarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- MACARRAY --------------------------------------------------------*/
+void p80211_totext_macarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+void p80211_fromtext_macarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of a MAC address array's value */
+UINT32 p80211_isvalid_macarray( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+/*-- MIBATTRIUBTE ------------------------------------------------------*/
+/* <mibvalue> ==> <textual representation identified in MIB metadata> */
+void p80211_totext_getmibattribute( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+void p80211_totext_setmibattribute( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+
+/* <textual representation identified in MIB metadata> ==> <mibvalue> */
+void p80211_fromtext_getmibattribute( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+void p80211_fromtext_setmibattribute( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf, char *textbuf );
+
+/* function that checks validity of a mibitem's binary value */
+UINT32 p80211_isvalid_getmibattribute( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+UINT32 p80211_isvalid_setmibattribute( struct catlistitem *metalist, UINT32 did, UINT8 *itembuf );
+
+#endif /* _P80211TYPES_H */
+
diff --git a/drivers/staging/wlan-ng/p80211wep.c b/drivers/staging/wlan-ng/p80211wep.c
new file mode 100644
index 0000000..53fe298
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211wep.c
@@ -0,0 +1,317 @@
+/* src/p80211/p80211wep.c
+*
+* WEP encode/decode for P80211.
+*
+* Copyright (C) 2002 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+
+
+#include <linux/version.h>
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+
+#include "version.h"
+#include "wlan_compat.h"
+
+// #define WEP_DEBUG
+
+/*================================================================*/
+/* Project Includes */
+
+#include "version.h"
+#include "p80211hdr.h"
+#include "p80211types.h"
+#include "p80211msg.h"
+#include "p80211conv.h"
+#include "p80211netdev.h"
+
+/*================================================================*/
+/* Local Constants */
+
+#define SSWAP(a,b) {UINT8 tmp = s[a]; s[a] = s[b]; s[b] = tmp;}
+#define WEP_KEY(x)       (((x) & 0xC0) >> 6)
+
+/*================================================================*/
+/* Local Macros */
+
+
+/*================================================================*/
+/* Local Types */
+
+
+/*================================================================*/
+/* Local Static Definitions */
+
+static const UINT32 wep_crc32_table[256] = {
+        0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+        0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+        0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+        0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+        0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+        0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+        0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+        0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+        0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+        0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+        0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+        0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+        0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+        0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+        0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+        0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+        0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+        0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+        0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+        0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+        0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+        0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+        0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+        0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+        0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+        0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+        0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+        0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+        0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+        0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+        0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+        0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+        0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+        0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+        0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+        0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+        0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+        0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+        0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+        0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+        0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+        0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+        0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+        0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+        0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+        0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+        0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+        0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+        0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+        0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+        0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+        0x2d02ef8dL
+};
+
+/*================================================================*/
+/* Local Function Declarations */
+
+/*================================================================*/
+/* Function Definitions */
+
+/* keylen in bytes! */
+
+int wep_change_key(wlandevice_t *wlandev, int keynum, UINT8* key, int keylen)
+{
+	if (keylen < 0)  return -1;
+	if (keylen >= MAX_KEYLEN) return -1;
+	if (key == NULL) return -1;
+	if (keynum < 0)  return -1;
+	if (keynum >= NUM_WEPKEYS) return -1;
+
+
+#ifdef WEP_DEBUG
+	printk(KERN_DEBUG "WEP key %d len %d = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", keynum, keylen, key[0], key[1], key[2], key[3], key[4], key[5], key[6], key[7]);
+#endif
+
+	wlandev->wep_keylens[keynum] = keylen;
+	memcpy(wlandev->wep_keys[keynum], key, keylen);
+
+	return 0;
+}
+
+/*
+  4-byte IV at start of buffer, 4-byte ICV at end of buffer.
+  if successful, buf start is payload begin, length -= 8;
+ */
+int wep_decrypt(wlandevice_t *wlandev, UINT8 *buf, UINT32 len, int key_override, UINT8 *iv, UINT8 *icv)
+{
+	UINT32 i, j, k, crc, keylen;
+	UINT8 s[256], key[64], c_crc[4];
+	UINT8 keyidx;
+
+	/* Needs to be at least 8 bytes of payload */
+	if (len <= 0) return -1;
+
+	/* initialize the first bytes of the key from the IV */
+	key[0] = iv[0];
+	key[1] = iv[1];
+	key[2] = iv[2];
+	keyidx = WEP_KEY(iv[3]);
+
+	if (key_override >= 0)
+		keyidx = key_override;
+
+	if (keyidx >= NUM_WEPKEYS) return -2;
+
+	keylen = wlandev->wep_keylens[keyidx];
+
+	if (keylen == 0) return -3;
+
+	/* copy the rest of the key over from the designated key */
+	memcpy(key+3, wlandev->wep_keys[keyidx], keylen);
+
+	keylen+=3;  /* add in IV bytes */
+
+#ifdef WEP_DEBUG
+	printk(KERN_DEBUG "D %d: %02x %02x %02x (%d %d) %02x:%02x:%02x:%02x:%02x\n", len, key[0], key[1], key[2], keyidx, keylen, key[3], key[4], key[5], key[6], key[7]);
+#endif
+
+	/* set up the RC4 state */
+	for (i = 0; i < 256; i++)
+		s[i] = i;
+	j = 0;
+	for (i = 0; i < 256; i++) {
+		j = (j + s[i] + key[i % keylen]) & 0xff;
+		SSWAP(i,j);
+	}
+
+	/* Apply the RC4 to the data, update the CRC32 */
+	crc = ~0;
+	i = j = 0;
+	for (k = 0; k < len; k++) {
+		i = (i+1) & 0xff;
+		j = (j+s[i]) & 0xff;
+		SSWAP(i,j);
+		buf[k] ^= s[(s[i] + s[j]) & 0xff];
+		crc = wep_crc32_table[(crc ^ buf[k]) & 0xff] ^ (crc >> 8);
+	}
+	crc = ~crc;
+
+	/* now let's check the crc */
+	c_crc[0] = crc;
+	c_crc[1] = crc >> 8;
+	c_crc[2] = crc >> 16;
+	c_crc[3] = crc >> 24;
+
+	for (k = 0; k < 4; k++) {
+		i = (i + 1) & 0xff;
+		j = (j+s[i]) & 0xff;
+		SSWAP(i,j);
+		if ((c_crc[k] ^ s[(s[i] + s[j]) & 0xff]) != icv[k])
+			return -(4 | (k << 4)) ; /* ICV mismatch */
+	}
+
+	return 0;
+}
+
+/* encrypts in-place. */
+int wep_encrypt(wlandevice_t *wlandev, UINT8 *buf, UINT8 *dst, UINT32 len, int keynum, UINT8 *iv, UINT8 *icv)
+{
+	UINT32 i, j, k, crc, keylen;
+	UINT8 s[256], key[64];
+
+	/* no point in WEPping an empty frame */
+	if (len <= 0) return -1;
+
+	/* we need to have a real key.. */
+	if (keynum >= NUM_WEPKEYS) return -2;
+	keylen = wlandev->wep_keylens[keynum];
+	if (keylen <= 0) return -3;
+
+	/* use a random IV.  And skip known weak ones. */
+	get_random_bytes(iv, 3);
+	while ((iv[1] == 0xff) && (iv[0] >= 3) && (iv[0] < keylen))
+		get_random_bytes(iv, 3);
+
+	iv[3] = (keynum & 0x03) << 6;
+
+	key[0] = iv[0];
+	key[1] = iv[1];
+	key[2] = iv[2];
+
+	/* copy the rest of the key over from the designated key */
+	memcpy(key+3, wlandev->wep_keys[keynum], keylen);
+
+	keylen+=3;  /* add in IV bytes */
+
+#ifdef WEP_DEBUG
+	printk(KERN_DEBUG "E %d (%d/%d %d) %02x %02x %02x %02x:%02x:%02x:%02x:%02x\n", len,  iv[3], keynum, keylen, key[0], key[1], key[2], key[3], key[4], key[5], key[6], key[7]);
+#endif
+
+	/* set up the RC4 state */
+	for (i = 0; i < 256; i++)
+		s[i] = i;
+	j = 0;
+	for (i = 0; i < 256; i++) {
+		j = (j + s[i] + key[i % keylen]) & 0xff;
+		SSWAP(i,j);
+	}
+
+	/* Update CRC32 then apply RC4 to the data */
+	crc = ~0;
+	i = j = 0;
+	for (k = 0; k < len; k++) {
+		crc = wep_crc32_table[(crc ^ buf[k]) & 0xff] ^ (crc >> 8);
+		i = (i+1) & 0xff;
+		j = (j+s[i]) & 0xff;
+		SSWAP(i,j);
+		dst[k] = buf[k] ^ s[(s[i] + s[j]) & 0xff];
+	}
+	crc = ~crc;
+
+	/* now let's encrypt the crc */
+	icv[0] = crc;
+	icv[1] = crc >> 8;
+	icv[2] = crc >> 16;
+	icv[3] = crc >> 24;
+
+	for (k = 0; k < 4; k++) {
+		i = (i + 1) & 0xff;
+		j = (j+s[i]) & 0xff;
+		SSWAP(i,j);
+		icv[k] ^= s[(s[i] + s[j]) & 0xff];
+	}
+
+	return 0;
+}
diff --git a/drivers/staging/wlan-ng/p80211wext.c b/drivers/staging/wlan-ng/p80211wext.c
new file mode 100644
index 0000000..906ba43
--- /dev/null
+++ b/drivers/staging/wlan-ng/p80211wext.c
@@ -0,0 +1,2048 @@
+/* src/p80211/p80211wext.c
+*
+* Glue code to make linux-wlan-ng a happy wireless extension camper.
+*
+* original author:  Reyk Floeter <reyk@synack.de>
+* Completely re-written by Solomon Peachy <solomon@linux-wlan.com>
+*
+* Copyright (C) 2002 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+
+
+#include <linux/version.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#if WIRELESS_EXT > 12
+#include <net/iw_handler.h>
+#endif
+#include <linux/if_arp.h>
+#include <asm/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+/*================================================================*/
+/* Project Includes */
+
+#include "version.h"
+#include "wlan_compat.h"
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211conv.h"
+#include "p80211mgmt.h"
+#include "p80211msg.h"
+#include "p80211metastruct.h"
+#include "p80211metadef.h"
+#include "p80211netdev.h"
+#include "p80211ioctl.h"
+#include "p80211req.h"
+
+static int p80211wext_giwrate(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      struct iw_param *rrq, char *extra);
+static int p80211wext_giwessid(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *data, char *essid);
+/* compatibility to wireless extensions */
+#ifdef WIRELESS_EXT
+
+static UINT8 p80211_mhz_to_channel(UINT16 mhz)
+{
+	if (mhz >= 5000) {
+		return ((mhz - 5000) / 5);
+	}
+
+	if (mhz == 2482)
+		return 14;
+
+	if (mhz >= 2407) {
+		return ((mhz - 2407) / 5);
+	}
+
+	return 0;
+}
+
+static UINT16 p80211_channel_to_mhz(UINT8 ch, int dot11a)
+{
+
+	if (ch == 0)
+		return 0;
+	if (ch > 200)
+		return 0;
+
+	/* 5G */
+
+	if (dot11a) {
+		return (5000 + (5 * ch));
+	}
+
+	/* 2.4G */
+
+	if (ch == 14)
+		return 2484;
+
+	if ((ch < 14) && (ch > 0)) {
+		return (2407 + (5 * ch));
+	}
+
+	return 0;
+}
+
+/* taken from orinoco.c ;-) */
+static const long p80211wext_channel_freq[] = {
+	2412, 2417, 2422, 2427, 2432, 2437, 2442,
+	2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+#define NUM_CHANNELS (sizeof(p80211wext_channel_freq) / sizeof(p80211wext_channel_freq[0]))
+
+/* steal a spare bit to store the shared/opensystems state. should default to open if not set */
+#define HOSTWEP_SHAREDKEY BIT3
+
+
+/** function declarations =============== */
+
+static int qual_as_percent(int snr ) {
+  if ( snr <= 0 )
+    return 0;
+  if ( snr <= 40 )
+    return snr*5/2;
+  return 100;
+}
+
+
+
+
+static int p80211wext_dorequest(wlandevice_t *wlandev, UINT32 did, UINT32 data)
+{
+	p80211msg_dot11req_mibset_t	msg;
+	p80211item_uint32_t		mibitem;
+	int	result;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+	mibitem.did = did;
+	mibitem.data = data;
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	DBFEXIT;
+	return result;
+}
+
+static int p80211wext_autojoin(wlandevice_t *wlandev)
+{
+	p80211msg_lnxreq_autojoin_t     msg;
+	struct iw_point			data;
+	char ssid[IW_ESSID_MAX_SIZE];
+
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	/* Get ESSID */
+	result = p80211wext_giwessid(wlandev->netdev, NULL, &data, ssid);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	if ( wlandev->hostwep & HOSTWEP_SHAREDKEY )
+	  msg.authtype.data = P80211ENUM_authalg_sharedkey;
+	else
+	  msg.authtype.data = P80211ENUM_authalg_opensystem;
+
+	msg.msgcode = DIDmsg_lnxreq_autojoin;
+
+	/* Trim the last '\0' to fit the SSID format */
+
+	if (data.length && ssid[data.length-1] == '\0') {
+		data.length = data.length - 1;
+	}
+
+	memcpy(msg.ssid.data.data, ssid, data.length);
+	msg.ssid.data.len = data.length;
+
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+exit:
+
+	DBFEXIT;
+	return err;
+
+}
+
+/* called by /proc/net/wireless */
+struct iw_statistics* p80211wext_get_wireless_stats (netdevice_t *dev)
+{
+	p80211msg_lnxreq_commsquality_t  quality;
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	struct iw_statistics* wstats = &wlandev->wstats;
+	int retval;
+
+	DBFENTER;
+	/* Check */
+	if ( (wlandev == NULL) || (wlandev->msdstate != WLAN_MSD_RUNNING) )
+		return NULL;
+
+	/* XXX Only valid in station mode */
+	wstats->status = 0;
+
+	/* build request message */
+	quality.msgcode = DIDmsg_lnxreq_commsquality;
+	quality.dbm.data = P80211ENUM_truth_true;
+	quality.dbm.status = P80211ENUM_msgitem_status_data_ok;
+
+	/* send message to nsd */
+	if ( wlandev->mlmerequest == NULL )
+		return NULL;
+
+	retval = wlandev->mlmerequest(wlandev, (p80211msg_t*) &quality);
+
+	wstats->qual.qual = qual_as_percent(quality.link.data);    /* overall link quality */
+	wstats->qual.level = quality.level.data;  /* instant signal level */
+	wstats->qual.noise = quality.noise.data;  /* instant noise level */
+
+#if WIRELESS_EXT > 18
+	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
+#else
+	wstats->qual.updated = 7;
+#endif
+	wstats->discard.code = wlandev->rx.decrypt_err;
+	wstats->discard.nwid = 0;
+	wstats->discard.misc = 0;
+
+#if WIRELESS_EXT > 11
+	wstats->discard.fragment = 0;  // incomplete fragments
+	wstats->discard.retries = 0;   // tx retries.
+	wstats->miss.beacon = 0;
+#endif
+
+	DBFEXIT;
+
+	return wstats;
+}
+
+static int p80211wext_giwname(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      char *name, char *extra)
+{
+	struct iw_param rate;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	result = p80211wext_giwrate(dev, NULL, &rate, NULL);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	switch (rate.value) {
+	case 1000000:
+	case 2000000:
+		strcpy(name, "IEEE 802.11-DS");
+		break;
+	case 5500000:
+	case 11000000:
+		strcpy(name, "IEEE 802.11-b");
+		break;
+	}
+exit:
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_giwfreq(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      struct iw_freq *freq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel;
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	if (mibitem.data > NUM_CHANNELS) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	/* convert into frequency instead of a channel */
+	freq->e = 1;
+	freq->m = p80211_channel_to_mhz(mibitem.data, 0) * 100000;
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_siwfreq(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      struct iw_freq *freq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+	mibitem.did = DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel;
+	mibitem.status = P80211ENUM_msgitem_status_data_ok;
+
+	if ( (freq->e == 0) && (freq->m <= 1000) )
+		mibitem.data = freq->m;
+	else
+		mibitem.data = p80211_mhz_to_channel(freq->m);
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+#if WIRELESS_EXT > 8
+
+static int p80211wext_giwmode(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      __u32 *mode, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+
+	DBFENTER;
+
+	switch (wlandev->macmode) {
+	case WLAN_MACMODE_IBSS_STA:
+		*mode = IW_MODE_ADHOC;
+		break;
+	case WLAN_MACMODE_ESS_STA:
+		*mode = IW_MODE_INFRA;
+		break;
+	case WLAN_MACMODE_ESS_AP:
+		*mode = IW_MODE_MASTER;
+		break;
+	default:
+		/* Not set yet. */
+		*mode = IW_MODE_AUTO;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+static int p80211wext_siwmode(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      __u32 *mode, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int 	result;
+	int     err = 0;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA &&
+	    *mode != IW_MODE_MASTER) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	/* Operation mode is the same with current mode */
+	if (*mode == wlandev->macmode)
+		goto exit;
+
+	switch (*mode) {
+	case IW_MODE_ADHOC:
+		wlandev->macmode = WLAN_MACMODE_IBSS_STA;
+		break;
+	case IW_MODE_INFRA:
+		wlandev->macmode = WLAN_MACMODE_ESS_STA;
+		break;
+	case IW_MODE_MASTER:
+		wlandev->macmode = WLAN_MACMODE_ESS_AP;
+		break;
+	default:
+		/* Not set yet. */
+		WLAN_LOG_INFO("Operation mode: %d not support\n", *mode);
+		return -EOPNOTSUPP;
+	}
+
+	/* Set Operation mode to the PORT TYPE RID */
+
+#warning "get rid of p2mib here"
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+	mibitem.did = DIDmib_p2_p2Static_p2CnfPortType;
+	mibitem.data = (*mode == IW_MODE_ADHOC) ? 0 : 1;
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result)
+		err = -EFAULT;
+
+ exit:
+	DBFEXIT;
+
+	return err;
+}
+
+
+static int p80211wext_giwrange(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *data, char *extra)
+{
+        struct iw_range *range = (struct iw_range *) extra;
+	int i, val;
+
+	DBFENTER;
+
+	// for backward compatability set size & zero everything we don't understand
+	data->length = sizeof(*range);
+	memset(range,0,sizeof(*range));
+
+#if WIRELESS_EXT > 9
+	range->txpower_capa = IW_TXPOW_DBM;
+	// XXX what about min/max_pmp, min/max_pmt, etc.
+#endif
+
+#if WIRELESS_EXT > 10
+	range->we_version_compiled = WIRELESS_EXT;
+	range->we_version_source = 13;
+
+	range->retry_capa = IW_RETRY_LIMIT;
+	range->retry_flags = IW_RETRY_LIMIT;
+	range->min_retry = 0;
+	range->max_retry = 255;
+#endif /* WIRELESS_EXT > 10 */
+
+#if WIRELESS_EXT > 16
+        range->event_capa[0] = (IW_EVENT_CAPA_K_0 |  //mode/freq/ssid
+                                IW_EVENT_CAPA_MASK(SIOCGIWAP) |
+                                IW_EVENT_CAPA_MASK(SIOCGIWSCAN));
+        range->event_capa[1] = IW_EVENT_CAPA_K_1;  //encode
+        range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVQUAL) |
+                                IW_EVENT_CAPA_MASK(IWEVCUSTOM) );
+#endif
+
+	range->num_channels = NUM_CHANNELS;
+
+	/* XXX need to filter against the regulatory domain &| active set */
+	val = 0;
+	for (i = 0; i < NUM_CHANNELS ; i++) {
+		range->freq[val].i = i + 1;
+		range->freq[val].m = p80211wext_channel_freq[i] * 100000;
+		range->freq[val].e = 1;
+		val++;
+	}
+
+	range->num_frequency = val;
+
+	/* Max of /proc/net/wireless */
+	range->max_qual.qual = 100;
+	range->max_qual.level = 0;
+	range->max_qual.noise = 0;
+	range->sensitivity = 3;
+	// XXX these need to be nsd-specific!
+
+	range->min_rts = 0;
+	range->max_rts = 2347;
+	range->min_frag = 256;
+	range->max_frag = 2346;
+
+	range->max_encoding_tokens = NUM_WEPKEYS;
+	range->num_encoding_sizes = 2;
+	range->encoding_size[0] = 5;
+	range->encoding_size[1] = 13;
+
+	// XXX what about num_bitrates/throughput?
+	range->num_bitrates = 0;
+
+	/* estimated max throughput */
+	// XXX need to cap it if we're running at ~2Mbps..
+	range->throughput = 5500000;
+
+	DBFEXIT;
+	return 0;
+}
+#endif
+
+static int p80211wext_giwap(netdevice_t *dev,
+			    struct iw_request_info *info,
+			    struct sockaddr *ap_addr, char *extra)
+{
+
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+
+	DBFENTER;
+
+	memcpy(ap_addr->sa_data, wlandev->bssid, WLAN_BSSID_LEN);
+	ap_addr->sa_family = ARPHRD_ETHER;
+
+	DBFEXIT;
+	return 0;
+}
+
+#if WIRELESS_EXT > 8
+static int p80211wext_giwencode(netdevice_t *dev,
+				struct iw_request_info *info,
+				struct iw_point *erq, char *key)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	int err = 0;
+	int i;
+
+	DBFENTER;
+
+	if (wlandev->hostwep & HOSTWEP_PRIVACYINVOKED)
+		erq->flags = IW_ENCODE_ENABLED;
+	else
+		erq->flags = IW_ENCODE_DISABLED;
+
+	if (wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED)
+		erq->flags |= IW_ENCODE_RESTRICTED;
+	else
+		erq->flags |= IW_ENCODE_OPEN;
+
+	i = (erq->flags & IW_ENCODE_INDEX) - 1;
+
+	if (i == -1)
+		i = wlandev->hostwep & HOSTWEP_DEFAULTKEY_MASK;
+
+	if ((i < 0) || (i >= NUM_WEPKEYS)) {
+		err = -EINVAL;
+		goto exit;
+	}
+
+	erq->flags |= i + 1;
+
+	/* copy the key from the driver cache as the keys are read-only MIBs */
+	erq->length = wlandev->wep_keylens[i];
+	memcpy(key, wlandev->wep_keys[i], erq->length);
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_siwencode(netdevice_t *dev,
+				struct iw_request_info *info,
+				struct iw_point *erq, char *key)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211msg_dot11req_mibset_t	msg;
+	p80211item_pstr32_t		pstr;
+
+	int err = 0;
+	int result = 0;
+	int enable = 0;
+	int i;
+
+	DBFENTER;
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	/* Check the Key index first. */
+	if((i = (erq->flags & IW_ENCODE_INDEX))) {
+
+		if ((i < 1) || (i > NUM_WEPKEYS)) {
+			err = -EINVAL;
+			goto exit;
+		}
+		else
+			i--;
+
+		result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID, i);
+
+		if (result) {
+			err = -EFAULT;
+			goto exit;
+		}
+		else {
+			enable = 1;
+		}
+
+	}
+	else {
+		// Do not thing when no Key Index
+	}
+
+	/* Check if there is no key information in the iwconfig request */
+	if((erq->flags & IW_ENCODE_NOKEY) == 0 && enable == 1) {
+
+		/*------------------------------------------------------------
+		 * If there is WEP Key for setting, check the Key Information
+		 * and then set it to the firmware.
+		 -------------------------------------------------------------*/
+
+		if (erq->length > 0) {
+
+			/* copy the key from the driver cache as the keys are read-only MIBs */
+			wlandev->wep_keylens[i] = erq->length;
+			memcpy(wlandev->wep_keys[i], key, erq->length);
+
+			/* Prepare data struture for p80211req_dorequest. */
+			memcpy(pstr.data.data, key, erq->length);
+			pstr.data.len = erq->length;
+
+			switch(i)
+			{
+				case 0:
+					pstr.did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
+					break;
+
+				case 1:
+					pstr.did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
+					break;
+
+				case 2:
+					pstr.did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
+					break;
+
+				case 3:
+					pstr.did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
+					break;
+
+				default:
+					err = -EINVAL;
+					goto exit;
+			}
+
+			msg.msgcode = DIDmsg_dot11req_mibset;
+			memcpy(&msg.mibattribute.data, &pstr, sizeof(pstr));
+			result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+			if (result) {
+				err = -EFAULT;
+				goto exit;
+			}
+		}
+
+	}
+
+	/* Check the PrivacyInvoked flag */
+	if (erq->flags & IW_ENCODE_DISABLED) {
+		result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked, P80211ENUM_truth_false);
+	}
+	else if((erq->flags & IW_ENCODE_ENABLED) || enable == 1) {
+		result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked, P80211ENUM_truth_true);
+	}
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	/* Check the ExcludeUnencrypted flag */
+	if (erq->flags & IW_ENCODE_RESTRICTED) {
+		result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted, P80211ENUM_truth_true);
+	}
+	else if (erq->flags & IW_ENCODE_OPEN) {
+		result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted, P80211ENUM_truth_false);
+	}
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+ exit:
+
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_giwessid(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *data, char *essid)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+
+	DBFENTER;
+
+	if (wlandev->ssid.len) {
+		data->length = wlandev->ssid.len;
+		data->flags = 1;
+		memcpy(essid, wlandev->ssid.data, data->length);
+		essid[data->length] = 0;
+#if (WIRELESS_EXT < 21)
+		data->length++;
+#endif
+	} else {
+	  	memset(essid, 0, sizeof(wlandev->ssid.data));
+		data->length = 0;
+		data->flags = 0;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+static int p80211wext_siwessid(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *data, char *essid)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211msg_lnxreq_autojoin_t     msg;
+
+	int result;
+	int err = 0;
+	int length = data->length;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+
+	if ( wlandev->hostwep & HOSTWEP_SHAREDKEY )
+	  msg.authtype.data = P80211ENUM_authalg_sharedkey;
+	else
+	  msg.authtype.data = P80211ENUM_authalg_opensystem;
+
+	msg.msgcode = DIDmsg_lnxreq_autojoin;
+
+#if (WIRELESS_EXT < 21)
+	if (length) length--;
+#endif
+
+	/* Trim the last '\0' to fit the SSID format */
+
+	if (length && essid[length-1] == '\0') {
+	  length--;
+	}
+
+	memcpy(msg.ssid.data.data, essid, length);
+	msg.ssid.data.len = length;
+
+	WLAN_LOG_DEBUG(1,"autojoin_ssid for %s \n",essid);
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+        WLAN_LOG_DEBUG(1,"autojoin_ssid %d\n",result);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+
+static int p80211wext_siwcommit(netdevice_t *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *essid)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	int err = 0;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	/* Auto Join */
+	err = p80211wext_autojoin(wlandev);
+
+ exit:
+ 	DBFEXIT;
+	return err;
+}
+
+
+static int p80211wext_giwrate(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      struct iw_param *rrq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_p2_p2MAC_p2CurrentTxRate;
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	rrq->fixed = 0;   /* can it change? */
+	rrq->disabled = 0;
+	rrq->value = 0;
+
+#define		HFA384x_RATEBIT_1			((UINT16)1)
+#define		HFA384x_RATEBIT_2			((UINT16)2)
+#define		HFA384x_RATEBIT_5dot5			((UINT16)4)
+#define		HFA384x_RATEBIT_11			((UINT16)8)
+
+	switch (mibitem.data) {
+	case HFA384x_RATEBIT_1:
+		rrq->value = 1000000;
+		break;
+	case HFA384x_RATEBIT_2:
+		rrq->value = 2000000;
+		break;
+	case HFA384x_RATEBIT_5dot5:
+		rrq->value = 5500000;
+		break;
+	case HFA384x_RATEBIT_11:
+		rrq->value = 11000000;
+		break;
+	default:
+		err = -EINVAL;
+	}
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_giwrts(netdevice_t *dev,
+			     struct iw_request_info *info,
+			     struct iw_param *rts, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold;
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	rts->value = mibitem.data;
+	rts->disabled = (rts->value == 2347);
+	rts->fixed = 1;
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+
+static int p80211wext_siwrts(netdevice_t *dev,
+			     struct iw_request_info *info,
+			     struct iw_param *rts, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold;
+	if (rts->disabled)
+		mibitem.data = 2347;
+	else
+		mibitem.data = rts->value;
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_giwfrag(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      struct iw_param *frag, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold;
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	frag->value = mibitem.data;
+	frag->disabled = (frag->value == 2346);
+	frag->fixed = 1;
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+static int p80211wext_siwfrag(netdevice_t *dev,
+			      struct iw_request_info *info,
+			      struct iw_param *frag, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold;
+
+	if (frag->disabled)
+		mibitem.data = 2346;
+	else
+		mibitem.data = frag->value;
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+#endif  /* WIRELESS_EXT > 8 */
+
+#if WIRELESS_EXT > 10
+
+#ifndef IW_RETRY_LONG
+#define IW_RETRY_LONG IW_RETRY_MAX
+#endif
+
+#ifndef IW_RETRY_SHORT
+#define IW_RETRY_SHORT IW_RETRY_MIN
+#endif
+
+static int p80211wext_giwretry(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_param *rrq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+	UINT16 shortretry, longretry, lifetime;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit;
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	shortretry = mibitem.data;
+
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit;
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	longretry = mibitem.data;
+
+	mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime;
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	lifetime = mibitem.data;
+
+	rrq->disabled = 0;
+
+	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+		rrq->flags = IW_RETRY_LIFETIME;
+		rrq->value = lifetime * 1024;
+	} else {
+		if (rrq->flags & IW_RETRY_LONG) {
+			rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+			rrq->value = longretry;
+		} else {
+			rrq->flags = IW_RETRY_LIMIT;
+			rrq->value = shortretry;
+			if (shortretry != longretry)
+				rrq->flags |= IW_RETRY_SHORT;
+		}
+	}
+
+ exit:
+	DBFEXIT;
+	return err;
+
+}
+
+static int p80211wext_siwretry(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_param *rrq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	if (!wlan_wext_write) {
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	if (rrq->disabled) {
+		err = -EINVAL;
+		goto exit;
+	}
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+
+	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+		mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime;
+		mibitem.data =  rrq->value /= 1024;
+
+		memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+		result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+		if (result) {
+			err = -EFAULT;
+			goto exit;
+		}
+	} else {
+		if (rrq->flags & IW_RETRY_LONG) {
+			mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit;
+			mibitem.data = rrq->value;
+
+			memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+			result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+			if (result) {
+				err = -EFAULT;
+				goto exit;
+			}
+		}
+
+		if (rrq->flags & IW_RETRY_SHORT) {
+			mibitem.did = DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit;
+			mibitem.data = rrq->value;
+
+			memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+			result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+			if (result) {
+				err = -EFAULT;
+				goto exit;
+			}
+		}
+	}
+
+ exit:
+	DBFEXIT;
+	return err;
+
+}
+
+#endif /* WIRELESS_EXT > 10 */
+
+#if WIRELESS_EXT > 9
+static int p80211wext_siwtxpow(netdevice_t *dev,
+                               struct iw_request_info *info,
+                               struct iw_param *rrq, char *extra)
+{
+        wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+        p80211item_uint32_t             mibitem;
+        p80211msg_dot11req_mibset_t     msg;
+        int result;
+        int err = 0;
+
+        DBFENTER;
+
+       if (!wlan_wext_write) {
+                err = (-EOPNOTSUPP);
+                goto exit;
+        }
+
+        msg.msgcode = DIDmsg_dot11req_mibset;
+
+        switch (rrq->value) {
+
+          case 1 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel1; break;
+          case 2 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel2; break;
+          case 3 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel3; break;
+          case 4 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel4; break;
+          case 5 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel5; break;
+          case 6 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel6; break;
+          case 7 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel7; break;
+          case 8 : mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel8; break;
+          default: mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel8; break;
+	}
+
+        memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+        result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+        if (result) {
+                err = -EFAULT;
+                goto exit;
+        }
+
+ exit:
+        DBFEXIT;
+        return err;
+}
+
+static int p80211wext_giwtxpow(netdevice_t *dev,
+			       struct iw_request_info *info,
+			       struct iw_param *rrq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211item_uint32_t             mibitem;
+	p80211msg_dot11req_mibset_t     msg;
+	int result;
+	int err = 0;
+
+	DBFENTER;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem.did = DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel;
+
+	memcpy(&msg.mibattribute.data, &mibitem, sizeof(mibitem));
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	memcpy(&mibitem, &msg.mibattribute.data, sizeof(mibitem));
+
+	// XXX handle OFF by setting disabled = 1;
+
+	rrq->flags = 0; // IW_TXPOW_DBM;
+	rrq->disabled = 0;
+	rrq->fixed = 0;
+	rrq->value = mibitem.data;
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+#endif /* WIRELESS_EXT > 9 */
+
+static int p80211wext_siwspy(netdevice_t *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *srq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+        struct sockaddr address[IW_MAX_SPY];
+        int number = srq->length;
+        int i;
+
+	DBFENTER;
+
+	/* Copy the data from the input buffer */
+	memcpy(address, extra, sizeof(struct sockaddr)*number);
+
+        wlandev->spy_number = 0;
+
+        if (number > 0) {
+
+                /* extract the addresses */
+                for (i = 0; i < number; i++) {
+
+                        memcpy(wlandev->spy_address[i], address[i].sa_data, ETH_ALEN);
+		}
+
+                /* reset stats */
+                memset(wlandev->spy_stat, 0, sizeof(struct iw_quality) * IW_MAX_SPY);
+
+                /* set number of addresses */
+                wlandev->spy_number = number;
+        }
+
+	DBFEXIT;
+	return 0;
+}
+
+/* jkriegl: from orinoco, modified */
+static int p80211wext_giwspy(netdevice_t *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *srq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+
+        struct sockaddr address[IW_MAX_SPY];
+        struct iw_quality spy_stat[IW_MAX_SPY];
+        int number;
+        int i;
+
+	DBFENTER;
+
+        number = wlandev->spy_number;
+
+        if (number > 0) {
+
+                /* populate address and spy struct's */
+                for (i = 0; i < number; i++) {
+                        memcpy(address[i].sa_data, wlandev->spy_address[i], ETH_ALEN);
+                        address[i].sa_family = AF_UNIX;
+                	memcpy(&spy_stat[i], &wlandev->spy_stat[i], sizeof(struct iw_quality));
+                }
+
+		/* reset update flag */
+                for (i=0; i < number; i++)
+                        wlandev->spy_stat[i].updated = 0;
+        }
+
+        /* push stuff to user space */
+        srq->length = number;
+	memcpy(extra, address, sizeof(struct sockaddr)*number);
+	memcpy(extra+sizeof(struct sockaddr)*number, spy_stat, sizeof(struct iw_quality)*number);
+
+	DBFEXIT;
+	return 0;
+}
+
+static int prism2_result2err (int prism2_result)
+{
+	int err = 0;
+
+	switch (prism2_result) {
+		case P80211ENUM_resultcode_invalid_parameters:
+			err = -EINVAL;
+			break;
+		case P80211ENUM_resultcode_implementation_failure:
+			err = -EIO;
+			break;
+		case P80211ENUM_resultcode_not_supported:
+			err = -EOPNOTSUPP;
+			break;
+		default:
+			err = 0;
+			break;
+	}
+
+	return err;
+}
+
+#if WIRELESS_EXT > 13
+static int p80211wext_siwscan(netdevice_t *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *srq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211msg_dot11req_scan_t	msg;
+	int result;
+	int err = 0;
+	int i = 0;
+
+	DBFENTER;
+
+	if (wlandev->macmode == WLAN_MACMODE_ESS_AP) {
+		WLAN_LOG_ERROR("Can't scan in AP mode\n");
+		err = (-EOPNOTSUPP);
+		goto exit;
+	}
+
+	memset(&msg, 0x00, sizeof(p80211msg_dot11req_scan_t));
+	msg.msgcode = DIDmsg_dot11req_scan;
+	msg.bsstype.data = P80211ENUM_bsstype_any;
+
+	memset(&(msg.bssid.data), 0xFF, sizeof (p80211item_pstr6_t));
+	msg.bssid.data.len = 6;
+
+	msg.scantype.data = P80211ENUM_scantype_active;
+	msg.probedelay.data = 0;
+
+	for (i = 1; i <= 14; i++)
+		msg.channellist.data.data[i-1] = i;
+	msg.channellist.data.len = 14;
+
+	msg.maxchanneltime.data = 250;
+	msg.minchanneltime.data = 200;
+
+	result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+	if (result)
+		err = prism2_result2err (msg.resultcode.data);
+
+ exit:
+	DBFEXIT;
+	return err;
+}
+
+
+/* Helper to translate scan into Wireless Extensions scan results.
+ * Inspired by the prism54 code, which was in turn inspired by the
+ * airo driver code.
+ */
+static char *
+wext_translate_bss(struct iw_request_info *info, char *current_ev,
+		   char *end_buf, p80211msg_dot11req_scan_results_t *bss)
+{
+	struct iw_event iwe;	/* Temporary buffer */
+
+	/* The first entry must be the MAC address */
+	memcpy(iwe.u.ap_addr.sa_data, bss->bssid.data.data, WLAN_BSSID_LEN);
+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+	iwe.cmd = SIOCGIWAP;
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+
+	/* The following entries will be displayed in the same order we give them */
+
+	/* The ESSID. */
+	if (bss->ssid.data.len > 0) {
+		char essid[IW_ESSID_MAX_SIZE + 1];
+		int size;
+
+		size = wlan_min(IW_ESSID_MAX_SIZE, bss->ssid.data.len);
+		memset(&essid, 0, sizeof (essid));
+		memcpy(&essid, bss->ssid.data.data, size);
+		WLAN_LOG_DEBUG(1, " essid size = %d\n", size);
+		iwe.u.data.length = size;
+		iwe.u.data.flags = 1;
+		iwe.cmd = SIOCGIWESSID;
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, &essid[0]);
+		WLAN_LOG_DEBUG(1, " essid size OK.\n");
+	}
+
+	switch (bss->bsstype.data) {
+		case P80211ENUM_bsstype_infrastructure:
+			iwe.u.mode = IW_MODE_MASTER;
+			break;
+
+		case P80211ENUM_bsstype_independent:
+			iwe.u.mode = IW_MODE_ADHOC;
+			break;
+
+		default:
+			iwe.u.mode = 0;
+			break;
+	}
+	iwe.cmd = SIOCGIWMODE;
+	if (iwe.u.mode)
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+
+	/* Encryption capability */
+	if (bss->privacy.data == P80211ENUM_truth_true)
+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+	else
+		iwe.u.data.flags = IW_ENCODE_DISABLED;
+	iwe.u.data.length = 0;
+	iwe.cmd = SIOCGIWENCODE;
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, NULL);
+
+	/* Add frequency. (short) bss->channel is the frequency in MHz */
+	iwe.u.freq.m = bss->dschannel.data;
+	iwe.u.freq.e = 0;
+	iwe.cmd = SIOCGIWFREQ;
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
+
+	/* Add quality statistics */
+	iwe.u.qual.level = bss->signal.data;
+	iwe.u.qual.noise = bss->noise.data;
+	/* do a simple SNR for quality */
+	iwe.u.qual.qual = qual_as_percent(bss->signal.data - bss->noise.data);
+	iwe.cmd = IWEVQUAL;
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+
+	return current_ev;
+}
+
+
+static int p80211wext_giwscan(netdevice_t *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *srq, char *extra)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	p80211msg_dot11req_scan_results_t	msg;
+	int result = 0;
+	int err = 0;
+	int i = 0;
+	int scan_good = 0;
+	char *current_ev = extra;
+
+	DBFENTER;
+
+	/* Since wireless tools doesn't really have a way of passing how
+	 * many scan results results there were back here, keep grabbing them
+	 * until we fail.
+	 */
+	do {
+		memset(&msg, 0, sizeof(msg));
+		msg.msgcode = DIDmsg_dot11req_scan_results;
+		msg.bssindex.data = i;
+
+		result = p80211req_dorequest(wlandev, (UINT8*)&msg);
+		if ((result != 0) ||
+		    (msg.resultcode.data != P80211ENUM_resultcode_success)) {
+			break;
+		}
+
+		current_ev = wext_translate_bss(info, current_ev, extra + IW_SCAN_MAX_DATA, &msg);
+		scan_good = 1;
+		i++;
+	} while (i < IW_MAX_AP);
+
+	srq->length = (current_ev - extra);
+	srq->flags = 0;	/* todo */
+
+	if (result && !scan_good)
+		err = prism2_result2err (msg.resultcode.data);
+
+	DBFEXIT;
+	return err;
+}
+#endif
+
+/*****************************************************/
+//extra wireless extensions stuff to support NetworkManager (I hope)
+
+#if WIRELESS_EXT > 17
+/* SIOCSIWENCODEEXT */
+static int p80211wext_set_encodeext(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+{
+  wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+  struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	p80211msg_dot11req_mibset_t	msg;
+	p80211item_pstr32_t		*pstr;
+
+  int result = 0;
+  struct iw_point *encoding = &wrqu->encoding;
+  int idx = encoding->flags & IW_ENCODE_INDEX;
+
+  WLAN_LOG_DEBUG(1,"set_encode_ext flags[%d] alg[%d] keylen[%d]\n",ext->ext_flags,(int)ext->alg,(int)ext->key_len);
+
+
+  if ( ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY ) {
+    // set default key ? I'm not sure if this the the correct thing to do here
+
+    if ( idx ) {
+      if (idx < 1 || idx > NUM_WEPKEYS) {
+	return -EINVAL;
+      } else
+	idx--;
+    }
+    WLAN_LOG_DEBUG(1,"setting default key (%d)\n",idx);
+    result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID, idx);
+    if ( result )
+      return -EFAULT;
+  }
+
+
+  if ( ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY ) {
+    if ( ! ext->alg & IW_ENCODE_ALG_WEP) {
+      WLAN_LOG_DEBUG(1,"asked to set a non wep key :(");
+      return -EINVAL;
+    }
+    if (idx) {
+      if (idx <1 || idx > NUM_WEPKEYS)
+	return -EINVAL;
+      else
+	idx--;
+    }
+    WLAN_LOG_DEBUG(1,"Set WEP key (%d)\n",idx);
+    wlandev->wep_keylens[idx] = ext->key_len;
+    memcpy(wlandev->wep_keys[idx], ext->key, ext->key_len);
+
+    memset( &msg,0,sizeof(msg));
+    pstr = (p80211item_pstr32_t*)&msg.mibattribute.data;
+    memcpy(pstr->data.data, ext->key,ext->key_len);
+    pstr->data.len = ext->key_len;
+    switch (idx) {
+    case 0:
+      pstr->did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
+      break;
+    case 1:
+      pstr->did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
+      break;
+    case 2:
+      pstr->did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
+      break;
+    case 3:
+      pstr->did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
+      break;
+    default:
+      break;
+    }
+    msg.msgcode = DIDmsg_dot11req_mibset;
+    result = p80211req_dorequest(wlandev,(UINT8*)&msg);
+    WLAN_LOG_DEBUG(1,"result (%d)\n",result);
+  }
+  return result;
+}
+
+/* SIOCGIWENCODEEXT */
+static int p80211wext_get_encodeext(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu, char *extra)
+
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+
+	struct iw_point *encoding = &wrqu->encoding;
+	int result = 0;
+	int max_len;
+	int idx;
+
+	DBFENTER;
+
+	WLAN_LOG_DEBUG(1,"get_encode_ext flags[%d] alg[%d] keylen[%d]\n",ext->ext_flags,(int)ext->alg,(int)ext->key_len);
+
+
+	max_len = encoding->length - sizeof(*ext);
+	if ( max_len <= 0) {
+		WLAN_LOG_DEBUG(1,"get_encodeext max_len [%d] invalid\n",max_len);
+		result = -EINVAL;
+		goto exit;
+	}
+	idx = encoding->flags & IW_ENCODE_INDEX;
+
+	WLAN_LOG_DEBUG(1,"get_encode_ext index [%d]\n",idx);
+
+	if (idx) {
+		if (idx < 1 || idx > NUM_WEPKEYS ) {
+			WLAN_LOG_DEBUG(1,"get_encode_ext invalid key index [%d]\n",idx);
+			result = -EINVAL;
+			goto exit;
+		}
+		idx--;
+	} else {
+		/* default key ? not sure what to do */
+		/* will just use key[0] for now ! FIX ME */
+	}
+
+	encoding->flags = idx + 1;
+	memset(ext,0,sizeof(*ext));
+
+	ext->alg = IW_ENCODE_ALG_WEP;
+	ext->key_len = wlandev->wep_keylens[idx];
+	memcpy( ext->key, wlandev->wep_keys[idx] , ext->key_len );
+
+	encoding->flags |= IW_ENCODE_ENABLED;
+exit:
+	DBFEXIT;
+
+	return result;
+}
+
+
+/* SIOCSIWAUTH */
+static int p80211_wext_set_iwauth (struct net_device *dev,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *extra)
+{
+  wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+  struct iw_param *param = &wrqu->param;
+  int result =0;
+
+  WLAN_LOG_DEBUG(1,"set_iwauth flags[%d]\n",(int)param->flags & IW_AUTH_INDEX );
+
+  switch (param->flags & IW_AUTH_INDEX) {
+  case IW_AUTH_DROP_UNENCRYPTED:
+    WLAN_LOG_DEBUG(1,"drop_unencrypted %d\n",param->value);
+    if (param->value)
+      result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted, P80211ENUM_truth_true);
+    else
+      result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted, P80211ENUM_truth_false);
+    break;
+
+  case IW_AUTH_PRIVACY_INVOKED:
+    WLAN_LOG_DEBUG(1,"privacy invoked %d\n",param->value);
+    if ( param->value)
+      result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked, P80211ENUM_truth_true);
+    else
+      result = p80211wext_dorequest(wlandev, DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked, P80211ENUM_truth_false);
+
+    break;
+
+  case IW_AUTH_80211_AUTH_ALG:
+    if ( param->value & IW_AUTH_ALG_OPEN_SYSTEM ) {
+      WLAN_LOG_DEBUG(1,"set open_system\n");
+      wlandev->hostwep &= ~HOSTWEP_SHAREDKEY;
+    } else if ( param->value & IW_AUTH_ALG_SHARED_KEY) {
+      WLAN_LOG_DEBUG(1,"set shared key\n");
+      wlandev->hostwep |= HOSTWEP_SHAREDKEY;
+    } else {
+      /* don't know what to do know :( */
+      WLAN_LOG_DEBUG(1,"unknown AUTH_ALG (%d)\n",param->value);
+      result = -EINVAL;
+    }
+    break;
+
+  default:
+    break;
+  }
+
+
+
+  return result;
+}
+
+/* SIOCSIWAUTH */
+static int p80211_wext_get_iwauth (struct net_device *dev,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *extra)
+{
+  wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+  struct iw_param *param = &wrqu->param;
+  int result =0;
+
+  WLAN_LOG_DEBUG(1,"get_iwauth flags[%d]\n",(int)param->flags & IW_AUTH_INDEX );
+
+  switch (param->flags & IW_AUTH_INDEX) {
+  case IW_AUTH_DROP_UNENCRYPTED:
+    param->value = wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED?1:0;
+    break;
+
+  case IW_AUTH_PRIVACY_INVOKED:
+    param->value = wlandev->hostwep & HOSTWEP_PRIVACYINVOKED?1:0;
+    break;
+
+  case IW_AUTH_80211_AUTH_ALG:
+    param->value = wlandev->hostwep & HOSTWEP_SHAREDKEY?IW_AUTH_ALG_SHARED_KEY:IW_AUTH_ALG_OPEN_SYSTEM;
+    break;
+
+
+  default:
+    break;
+  }
+
+
+
+  return result;
+}
+
+
+#endif
+
+
+
+
+
+
+/*****************************************************/
+
+
+
+
+
+/*
+typedef int (*iw_handler)(netdevice_t *dev, struct iw_request_info *info,
+                          union iwreq_data *wrqu, char *extra);
+*/
+
+#if WIRELESS_EXT > 12
+static iw_handler p80211wext_handlers[] =  {
+	(iw_handler) p80211wext_siwcommit,		/* SIOCSIWCOMMIT */
+	(iw_handler) p80211wext_giwname,		/* SIOCGIWNAME */
+	(iw_handler) NULL,				/* SIOCSIWNWID */
+	(iw_handler) NULL,				/* SIOCGIWNWID */
+	(iw_handler) p80211wext_siwfreq,  		/* SIOCSIWFREQ */
+	(iw_handler) p80211wext_giwfreq,  		/* SIOCGIWFREQ */
+	(iw_handler) p80211wext_siwmode,       		/* SIOCSIWMODE */
+	(iw_handler) p80211wext_giwmode,       		/* SIOCGIWMODE */
+	(iw_handler) NULL,                 		/* SIOCSIWSENS */
+	(iw_handler) NULL,                		/* SIOCGIWSENS */
+	(iw_handler) NULL, /* not used */     		/* SIOCSIWRANGE */
+	(iw_handler) p80211wext_giwrange,      		/* SIOCGIWRANGE */
+	(iw_handler) NULL, /* not used */     		/* SIOCSIWPRIV */
+	(iw_handler) NULL, /* kernel code */   		/* SIOCGIWPRIV */
+	(iw_handler) NULL, /* not used */     		/* SIOCSIWSTATS */
+	(iw_handler) NULL, /* kernel code */   		/* SIOCGIWSTATS */
+	(iw_handler) p80211wext_siwspy,			/* SIOCSIWSPY */
+	(iw_handler) p80211wext_giwspy,			/* SIOCGIWSPY */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,              		/* SIOCSIWAP */
+	(iw_handler) p80211wext_giwap,         		/* SIOCGIWAP */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,                  		/* SIOCGIWAPLIST */
+#if WIRELESS_EXT > 13
+	(iw_handler) p80211wext_siwscan,			/* SIOCSIWSCAN */
+	(iw_handler) p80211wext_giwscan,			/* SIOCGIWSCAN */
+#else /* WIRELESS_EXT > 13 */
+	(iw_handler) NULL,	/* null */		/* SIOCSIWSCAN */
+	(iw_handler) NULL,	/* null */		/* SIOCGIWSCAN */
+#endif /* WIRELESS_EXT > 13 */
+	(iw_handler) p80211wext_siwessid,  		/* SIOCSIWESSID */
+	(iw_handler) p80211wext_giwessid,      		/* SIOCGIWESSID */
+	(iw_handler) NULL,                 		/* SIOCSIWNICKN */
+	(iw_handler) p80211wext_giwessid,      		/* SIOCGIWNICKN */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,                		/* SIOCSIWRATE */
+	(iw_handler) p80211wext_giwrate,      		/* SIOCGIWRATE */
+	(iw_handler) p80211wext_siwrts,  		/* SIOCSIWRTS */
+	(iw_handler) p80211wext_giwrts,        		/* SIOCGIWRTS */
+	(iw_handler) p80211wext_siwfrag,      		/* SIOCSIWFRAG */
+	(iw_handler) p80211wext_giwfrag,   		/* SIOCGIWFRAG */
+	(iw_handler) p80211wext_siwtxpow,           	/* SIOCSIWTXPOW */
+	(iw_handler) p80211wext_giwtxpow,  		/* SIOCGIWTXPOW */
+	(iw_handler) p80211wext_siwretry,     		/* SIOCSIWRETRY */
+	(iw_handler) p80211wext_giwretry,  		/* SIOCGIWRETRY */
+	(iw_handler) p80211wext_siwencode,     		/* SIOCSIWENCODE */
+	(iw_handler) p80211wext_giwencode,  		/* SIOCGIWENCODE */
+	(iw_handler) NULL,                 		/* SIOCSIWPOWER */
+	(iw_handler) NULL,                  		/* SIOCGIWPOWER */
+#if WIRELESS_EXT > 17
+/* WPA operations */
+
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL, /* SIOCSIWGENIE	set generic IE */
+	(iw_handler) NULL, /* SIOCGIWGENIE	get generic IE */
+	(iw_handler) p80211_wext_set_iwauth, /* SIOCSIWAUTH	set authentication mode params */
+	(iw_handler) p80211_wext_get_iwauth, /* SIOCGIWAUTH	get authentication mode params */
+
+	(iw_handler) p80211wext_set_encodeext, /* SIOCSIWENCODEEXT  set encoding token & mode */
+	(iw_handler) p80211wext_get_encodeext, /* SIOCGIWENCODEEXT  get encoding token & mode */
+	(iw_handler) NULL, /* SIOCSIWPMKSA	PMKSA cache operation */
+#endif
+};
+
+struct iw_handler_def p80211wext_handler_def = {
+	.num_standard = sizeof(p80211wext_handlers) / sizeof(iw_handler),
+	.num_private = 0,
+	.num_private_args = 0,
+        .standard = p80211wext_handlers,
+	.private = NULL,
+	.private_args = NULL,
+#if WIRELESS_EXT > 16
+	.get_wireless_stats = p80211wext_get_wireless_stats
+#endif
+};
+
+#endif
+
+/* wireless extensions' ioctls */
+int p80211wext_support_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
+{
+	wlandevice_t *wlandev = (wlandevice_t*)dev->priv;
+
+#if WIRELESS_EXT < 13
+	struct iwreq *iwr = (struct iwreq*)ifr;
+#endif
+
+	p80211item_uint32_t             mibitem;
+	int err = 0;
+
+	DBFENTER;
+
+	mibitem.status = P80211ENUM_msgitem_status_data_ok;
+
+	if ( wlandev->msdstate != WLAN_MSD_RUNNING ) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	WLAN_LOG_DEBUG(1, "Received wireless extension ioctl #%d.\n", cmd);
+
+	switch (cmd) {
+#if WIRELESS_EXT < 13
+	case SIOCSIWNAME:  /* unused  */
+		err = (-EOPNOTSUPP);
+		break;
+	case SIOCGIWNAME: /* get name == wireless protocol */
+                err = p80211wext_giwname(dev, NULL, (char *) &iwr->u, NULL);
+		break;
+	case SIOCSIWNWID:
+	case SIOCGIWNWID:
+		err = (-EOPNOTSUPP);
+		break;
+	case SIOCSIWFREQ: /* set channel */
+                err = p80211wext_siwfreq(dev, NULL, &(iwr->u.freq), NULL);
+		break;
+	case SIOCGIWFREQ: /* get channel */
+                err = p80211wext_giwfreq(dev, NULL, &(iwr->u.freq), NULL);
+		break;
+	case SIOCSIWRANGE:
+	case SIOCSIWPRIV:
+	case SIOCSIWAP: /* set access point MAC addresses (BSSID) */
+		err = (-EOPNOTSUPP);
+		break;
+
+	case SIOCGIWAP:	/* get access point MAC addresses (BSSID) */
+                err = p80211wext_giwap(dev, NULL, &(iwr->u.ap_addr), NULL);
+		break;
+
+#if WIRELESS_EXT > 8
+	case SIOCSIWMODE: /* set operation mode */
+	case SIOCSIWESSID: /* set SSID (network name) */
+	case SIOCSIWRATE: /* set default bit rate (bps) */
+		err = (-EOPNOTSUPP);
+		break;
+
+	case SIOCGIWMODE: /* get operation mode */
+		err = p80211wext_giwmode(dev, NULL, &iwr->u.mode, NULL);
+
+		break;
+	case SIOCGIWNICKN: /* get node name/nickname */
+	case SIOCGIWESSID: /* get SSID */
+		if(iwr->u.essid.pointer) {
+                        char ssid[IW_ESSID_MAX_SIZE+1];
+			memset(ssid, 0, sizeof(ssid));
+
+			err = p80211wext_giwessid(dev, NULL, &iwr->u.essid, ssid);
+			if(copy_to_user(iwr->u.essid.pointer, ssid, sizeof(ssid)))
+				err = (-EFAULT);
+		}
+		break;
+	case SIOCGIWRATE:
+                err = p80211wext_giwrate(dev, NULL, &iwr->u.bitrate, NULL);
+		break;
+	case SIOCGIWRTS:
+		err = p80211wext_giwrts(dev, NULL, &iwr->u.rts, NULL);
+		break;
+	case SIOCGIWFRAG:
+		err = p80211wext_giwfrag(dev, NULL, &iwr->u.rts, NULL);
+		break;
+	case SIOCGIWENCODE:
+		if (!capable(CAP_NET_ADMIN))
+			err = -EPERM;
+		else if (iwr->u.encoding.pointer) {
+			char keybuf[MAX_KEYLEN];
+			err = p80211wext_giwencode(dev, NULL,
+						     &iwr->u.encoding, keybuf);
+			if (copy_to_user(iwr->u.encoding.pointer, keybuf,
+					 iwr->u.encoding.length))
+				err = -EFAULT;
+		}
+		break;
+	case SIOCGIWAPLIST:
+	case SIOCSIWRTS:
+	case SIOCSIWFRAG:
+	case SIOCSIWSENS:
+	case SIOCGIWSENS:
+	case SIOCSIWNICKN: /* set node name/nickname */
+	case SIOCSIWENCODE: /* set encoding token & mode */
+	case SIOCSIWSPY:
+	case SIOCGIWSPY:
+	case SIOCSIWPOWER:
+	case SIOCGIWPOWER:
+	case SIOCGIWPRIV:
+		err = (-EOPNOTSUPP);
+		break;
+	case SIOCGIWRANGE:
+		if(iwr->u.data.pointer != NULL) {
+                        struct iw_range range;
+                        err = p80211wext_giwrange(dev, NULL, &iwr->u.data,
+						  (char *) &range);
+			/* Push that up to the caller */
+			if (copy_to_user(iwr->u.data.pointer, &range, sizeof(range)))
+				err = -EFAULT;
+		}
+		break;
+#endif /* WIRELESS_EXT > 8 */
+#if WIRELESS_EXT > 9
+	case SIOCSIWTXPOW:
+		err = (-EOPNOTSUPP);
+		break;
+	case SIOCGIWTXPOW:
+		err = p80211wext_giwtxpow(dev, NULL, &iwr->u.txpower, NULL);
+		break;
+#endif /* WIRELESS_EXT > 9 */
+#if WIRELESS_EXT > 10
+	case SIOCSIWRETRY:
+		err = (-EOPNOTSUPP);
+		break;
+	case SIOCGIWRETRY:
+		err = p80211wext_giwretry(dev, NULL, &iwr->u.retry, NULL);
+		break;
+#endif /* WIRELESS_EXT > 10 */
+
+#endif /* WIRELESS_EXT <= 12 */
+
+	default:
+		err = (-EOPNOTSUPP);
+		break;
+	}
+
+ exit:
+	DBFEXIT;
+	return (err);
+}
+
+int p80211wext_event_associated(wlandevice_t *wlandev, int assoc)
+{
+        union iwreq_data data;
+
+        DBFENTER;
+
+#if WIRELESS_EXT > 13
+        /* Send the association state first */
+        data.ap_addr.sa_family = ARPHRD_ETHER;
+        if (assoc) {
+                memcpy(data.ap_addr.sa_data, wlandev->bssid, WLAN_ADDR_LEN);
+        } else {
+                memset(data.ap_addr.sa_data, 0, WLAN_ADDR_LEN);
+        }
+
+        if (wlan_wext_write)
+                wireless_send_event(wlandev->netdev, SIOCGIWAP, &data, NULL);
+
+        if (!assoc) goto done;
+
+        // XXX send association data, like IEs, etc etc.
+#endif
+ done:
+        DBFEXIT;
+        return 0;
+}
+
+
+#endif /* compatibility to wireless extensions */
+
+
+
+
diff --git a/drivers/staging/wlan-ng/prism2_cs.c b/drivers/staging/wlan-ng/prism2_cs.c
new file mode 100644
index 0000000..63ce565
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2_cs.c
@@ -0,0 +1,1487 @@
+#define WLAN_HOSTIF WLAN_PCMCIA
+#include "hfa384x.c"
+#include "prism2mgmt.c"
+#include "prism2mib.c"
+#include "prism2sta.c"
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,21) )
+#if (WLAN_CPU_FAMILY == WLAN_Ix86)
+#ifndef CONFIG_ISA
+#warning "You may need to enable ISA support in your kernel."
+#endif
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
+static u_int	irq_mask = 0xdeb8;		/* Interrupt mask */
+static int	irq_list[4] = { -1 };		/* Interrupt list */
+#endif
+static u_int	prism2_ignorevcc=1;		/* Boolean, if set, we
+						 * ignore what the Vcc
+						 * is set to and what the CIS
+						 * says.
+						 */
+module_param( prism2_ignorevcc, int, 0644);
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,9))
+static int numlist = 4;
+module_param_array(irq_list, int, numlist, 0444);
+#else
+module_param_array(irq_list, int, NULL, 0444);
+#endif
+module_param( irq_mask, int, 0644);
+#endif
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
+static int prism2_cs_suspend(struct pcmcia_device *pdev);
+static int prism2_cs_resume(struct pcmcia_device *pdev);
+static void prism2_cs_remove(struct pcmcia_device *pdev);
+static int prism2_cs_probe(struct pcmcia_device *pdev);
+#else
+dev_link_t	*prism2sta_attach(void);
+static void	prism2sta_detach(dev_link_t *link);
+static void	prism2sta_config(dev_link_t *link);
+static void	prism2sta_release(u_long arg);
+static int 	prism2sta_event (event_t event, int priority, event_callback_args_t *args);
+
+static dev_link_t	*dev_list = NULL;	/* head of instance list */
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
+/*----------------------------------------------------------------
+* cs_error
+*
+* Utility function to print card services error messages.
+*
+* Arguments:
+*	handle	client handle identifying this CS client
+*	func	CS function number that generated the error
+*	ret	CS function return code
+*
+* Returns:
+*	nothing
+* Side effects:
+*
+* Call context:
+*	process thread
+*	interrupt
+----------------------------------------------------------------*/
+static void cs_error(client_handle_t handle, int func, int ret)
+{
+#if (defined(CS_RELEASE_CODE) && (CS_RELEASE_CODE < 0x2911))
+	CardServices(ReportError, dev_info, (void *)func, (void *)ret);
+#else
+	error_info_t err = { func, ret };
+	pcmcia_report_error(handle, &err);
+#endif
+}
+#else // kernel_version
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)
+static struct pcmcia_device_id prism2_cs_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("INTERSIL",  "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), // Intersil PRISM2 Reference Design 11Mb/s 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), // Compaq WL100/200 11Mb/s 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), // Compaq iPaq HNW-100 11Mb/s 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), // Samsung SWL2000-N 11Mb/s 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), // Z-Com XI300 11Mb/s 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High",  "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), // ZoomAir 4100 11Mb/s 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ",  " Network PC CARD",  "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), // Linksys WPC11 11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("Addtron",  "AWP-100 Wireless PCMCIA",  "Version 01.02", 0xe6ec52ce, 0x8649af2, 0x4b74baa0), // Addtron AWP-100 11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("D",  "Link DWL-650 11Mbps WLAN Card",  "Version 01.02", 0x71b18589, 0xb6f1b0ab, 0x4b74baa0), // D-Link DWL-650 11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("SMC",  "SMC2632W",  "Version 01.02", 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0), // SMC 2632W 11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID1234("Intersil",  "PRISM 2_5 PCMCIA ADAPTER",  "ISL37300P",  "Eval-RevA", 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e), // BroMax Freeport 11Mbps 802.11b WLAN Card (Prism 2.5)
+	PCMCIA_DEVICE_PROD_ID123("U.S. Robotics",  "IEEE 802.11b PC-CARD",  "Version 01.02", 0xc7b8df9d, 0x1700d087, 0x4b74baa0), // U.S. Robotics IEEE 802.11b PC-CARD
+	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications",  "WPC-0100", 0xfdd73470, 0xe0b6f146), // Level-One WPC-0100
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), // Bromax OEM 11Mbps 802.11b WLAN Card (Prism 2.5)
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), // Bromax OEM 11Mbps 802.11b WLAN Card (Prism 3)
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.",  "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), // corega K.K. Wireless LAN PCC-11
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.",  "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), // corega K.K. Wireless LAN PCCA-11
+	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), // CONTEC FLEXSCAN/FX-DDS110-PCC
+	PCMCIA_DEVICE_PROD_ID12("PLANEX",  "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), // PLANEX GeoWave/GW-NS110
+	PCMCIA_DEVICE_PROD_ID123("OEM",  "PRISM2 IEEE 802.11 PC-Card",  "Version 01.02", 0xfea54c90, 0x48f2bdd6, 0x4b74baa0), // Ambicom WL1100 11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("LeArtery",  "SYNCBYAIR 11Mbps Wireless LAN PC Card",  "Version 01.02", 0x7e3b326a, 0x49893e92, 0x4b74baa0), // LeArtery SYNCBYAIR 11Mbps 802.11b WLAN Card
+PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), // Intermec MobileLAN 11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("NETGEAR MA401 Wireless PC",  "Card",  "Version 01.00", 0xa37434e9, 0x9762e8f1, 0xa57adb8c), // NETGEAR MA401 11Mbps 802.11 WLAN Card
+	PCMCIA_DEVICE_PROD_ID1234("Intersil",  "PRISM Freedom PCMCIA Adapter",  "ISL37100P",  "Eval-RevA", 0x4b801a17, 0xf222ec2d, 0x630d52b2, 0xc23adc0e), // Intersil PRISM Freedom 11mbps 802.11 WLAN Card
+	PCMCIA_DEVICE_PROD_ID123("OTC",  "Wireless AirEZY 2411-PCC WLAN Card",  "Version 01.02", 0x4ac44287, 0x235a6bed, 0x4b74baa0), // OTC Wireless AirEZY 2411-PCC 11Mbps 802.11 WLAN Card
+	PCMCIA_DEVICE_PROD_ID1234("802.11",  "11Mbps Wireless LAN Card",  "v08C1",  ""   , 0xb67a610e, 0x655aa7b7, 0x264b451a, 0x0), // Dynalink L11HDT 11Mbps 802.11 WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), // Dynalink L11HDT 11Mbps 802.11 WLAN Card
+	PCMCIA_DEVICE_PROD_ID12("PROXIM",  "RangeLAN-DS/LAN PC CARD", 0xc6536a5e, 0x3f35797d), // PROXIM RangeLAN-DS/LAN PC CARD
+	PCMCIA_DEVICE_PROD_ID1234("ACTIONTEC",  "PRISM Wireless LAN PC Card",  "0381",  "RevA", 0x393089da, 0xa71e69d5, 0x90471fa9, 0x57a66194), // ACTIONTEC PRISM Wireless LAN PC Card
+	PCMCIA_DEVICE_MANF_CARD(0x1668, 0x0101), // ACTIONTEC PRISM Wireless LAN PC Card
+	PCMCIA_DEVICE_PROD_ID12("3Com",  "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), // 3Com AirConnect 3CRWE737A
+	PCMCIA_DEVICE_PROD_ID12("3Com",  "3CRWE777A AirConnect Wireless LAN PCI Card"  , 0x41240e5b, 0xafc7c33e), // 3Com AirConnect 3CRWE777A
+	PCMCIA_DEVICE_PROD_ID12("ASUS",  "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), // ASUS WL-100 802.11b WLAN  PC Card
+	PCMCIA_DEVICE_PROD_ID12("ASUS",  "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), // ASUS WL-110 802.11b WLAN CF Card
+	PCMCIA_DEVICE_PROD_ID12("BUFFALO",  "WLI-CF-S11G", 0x2decece3, 0x82067c18), // BUFFALO WLI-CF-S11G 802.11b WLAN Card
+	PCMCIA_DEVICE_PROD_ID1234("The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA", 0xa5f472c2, 0x9c05598d, 0xc9049a39, 0x57a66194), // Linksys WCF11 11Mbps 802.11b WLAN Card (Prism 2.5)
+	PCMCIA_DEVICE_PROD_ID1234("Linksys",  "Wireless CompactFlash Card",  "",  "", 0x733cc81, 0xc52f395, 0x0, 0x0), // Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), // Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)
+	PCMCIA_DEVICE_PROD_ID1234("NETGEAR MA401RA Wireless PC",  "Card",  "ISL37300P",  "Eval-RevA", 0x306467f, 0x9762e8f1, 0xc9049a39, 0xc23adc0e), // NETGEAR MA401RA 11Mbps 802.11 WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), // D-Link DCF-660W  11Mbps 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001), // Microsoft Wireless Notebook Adapter MN-520
+	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), // AnyPoint(TM) Wireless II PC Card
+	PCMCIA_DEVICE_PROD_ID1234("D",  "Link DRC-650 11Mbps WLAN Card",  "Version 01.02",  "" , 0x71b18589, 0xf144e3ac, 0x4b74baa0, 0x0), // D-Link DRC-650 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), // Adaptec AWN-8030
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7110), // D-Link DWL-650 rev P 802.11b WLAN card
+	// PCMCIA_DEVICE_PROD_ID1234("D-Link",  "DWL-650 Wireless PC Card RevP",  "ISL37101P-10",  "A3", 0x1a424a1c, 0x6ea57632, 0xdd97a26b, 0x56b21f52), // D-Link DWL-650 rev P 802.11b WLAN card
+	PCMCIA_DEVICE_PROD_ID123("INTERSIL",   "I-GATE 11M PC Card / PC Card plus",  "Version 01.02", 0x74c5e40d, 0x8304ff77, 0x4b74baa0), // I-Gate 11M PC Card
+	PCMCIA_DEVICE_PROD_ID1234("BENQ",  "AWL100 PCMCIA ADAPTER",  "ISL37300P",  "Eval-RevA", 0x35dadc74, 0x1f7fedb, 0xc9049a39, 0xc23adc0e), // benQ AWL100 802.11b WLAN Card
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), // benQ AWL100 802.11b WLAN Card
+	// PCMCIA_DEVICE_PROD_ID1("INTERSIL", 0x74c5e40d), // Intersil Prism 2 card
+	// PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), // Intersil Prism 2 card
+
+	PCMCIA_DEVICE_NULL
+};
+
+MODULE_DEVICE_TABLE(pcmcia, prism2_cs_ids);
+#endif
+
+static struct pcmcia_driver prism2_cs_driver = {
+	.drv = {
+		.name = "prism2_cs",
+	},
+	.owner = THIS_MODULE,
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
+	.suspend = prism2_cs_suspend,
+	.resume = prism2_cs_resume,
+	.remove = prism2_cs_remove,
+	.probe = prism2_cs_probe,
+	.id_table = prism2_cs_ids,
+#else
+	.attach = prism2sta_attach,
+	.detach = prism2sta_detach,
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)
+	.id_table = prism2_cs_ids,
+	.event =  prism2sta_event,
+#endif // > 2.6.12
+#endif // <= 2.6.15
+};
+#endif /* kernel_version */
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+#define CFG_CHECK(fn, retf) \
+do { int ret = (retf); \
+if (ret != 0) { \
+        WLAN_LOG_DEBUG(1, "CardServices(" #fn ") returned %d\n", ret); \
+        cs_error(pdev, fn, ret); \
+        goto next_entry; \
+} \
+} while (0)
+
+static void prism2_cs_remove(struct pcmcia_device *pdev)
+{
+	struct wlandevice  *wlandev;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
+        dev_link_t *link = dev_to_instance(pdev);
+#endif
+
+	DBFENTER;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	wlandev = pdev->priv;
+#else
+	wlandev = link->priv;
+#endif
+
+	if (wlandev) {
+		p80211netdev_hwremoved(wlandev);
+		unregister_wlandev(wlandev);
+		wlan_unsetup(wlandev);
+		if (wlandev->priv) {
+			hfa384x_t *hw = wlandev->priv;
+			wlandev->priv = NULL;
+			if (hw) {
+				hfa384x_destroy(hw);
+				kfree(hw);
+			}
+		}
+		kfree(wlandev);
+	}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	pdev->priv = NULL;
+        pcmcia_disable_device(pdev);
+#else
+        if (link->state & DEV_CONFIG) {
+	        if (link->win)
+			pcmcia_release_window(link->win);
+		pcmcia_release_configuration(link->handle);
+		if (link->io.NumPorts1)
+			pcmcia_release_io(link->handle, &link->io);
+		if (link->irq.AssignedIRQ)
+			pcmcia_release_irq(link->handle, &link->irq);
+
+		link->state &= ~DEV_CONFIG;
+	}
+
+	link->priv = NULL;
+	kfree(link);
+#endif
+
+	DBFEXIT;
+	return;
+}
+
+static int prism2_cs_suspend(struct pcmcia_device *pdev)
+{
+	struct wlandevice  *wlandev;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
+        dev_link_t *link = dev_to_instance(pdev);
+#endif
+
+	DBFENTER;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	wlandev = pdev->priv;
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+#else
+	wlandev = link->priv;
+
+        link->state |= DEV_SUSPEND;
+        if (link->state & DEV_CONFIG) {
+		prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+		pcmcia_release_configuration(link->handle);
+	}
+#endif
+
+	DBFEXIT;
+
+	return 0;
+}
+
+static int prism2_cs_resume(struct pcmcia_device *pdev)
+{
+	struct wlandevice  *wlandev;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
+        dev_link_t *link = dev_to_instance(pdev);
+#endif
+
+	DBFENTER;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	wlandev = pdev->priv;
+	// XXX do something here?
+#else
+	wlandev = link->priv;
+        link->state &= ~DEV_SUSPEND;
+        if (link->state & DEV_CONFIG) {
+                pcmcia_request_configuration(link->handle, &link->conf);
+		// XXX do something here?
+	}
+#endif
+
+
+	DBFEXIT;
+
+	return 0;
+}
+
+static int prism2_cs_probe(struct pcmcia_device *pdev)
+{
+	int rval = 0;
+	struct wlandevice *wlandev = NULL;
+	hfa384x_t *hw = NULL;
+
+        config_info_t socketconf;
+        cisparse_t *parse = NULL;
+	tuple_t tuple;
+	uint8_t	buf[64];
+        int last_fn, last_ret;
+        cistpl_cftable_entry_t dflt = { 0 };
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
+	dev_link_t *link;
+#endif
+
+	DBFENTER;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	/* Set up interrupt type */
+        pdev->conf.IntType = INT_MEMORY_AND_IO;
+#else
+        link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
+        if (link == NULL)
+                return -ENOMEM;
+        memset(link, 0, sizeof(dev_link_t));
+
+        link->conf.Vcc = 33;
+        link->conf.IntType = INT_MEMORY_AND_IO;
+
+        link->handle = pdev;
+        pdev->instance = link;
+        link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+
+#endif
+
+	// VCC crap?
+        parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
+
+	wlandev = create_wlan();
+	if (!wlandev || !parse) {
+		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+		rval = -EIO;
+		goto failed;
+	}
+	hw = wlandev->priv;
+
+	if ( wlan_setup(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
+		rval = -EIO;
+		goto failed;
+	}
+
+	/* Initialize the hw struct for now */
+	hfa384x_create(hw, 0, 0, NULL);
+	hw->wlandev = wlandev;
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	hw->pdev = pdev;
+	pdev->priv = wlandev;
+#else
+	hw->link = link;
+	link->priv = wlandev;
+#endif
+
+        tuple.DesiredTuple = CISTPL_CONFIG;
+        tuple.Attributes = 0;
+        tuple.TupleData = buf;
+        tuple.TupleDataMax = sizeof(buf);
+        tuple.TupleOffset = 0;
+        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
+        CS_CHECK(GetTupleData, pcmcia_get_tuple_data(pdev, &tuple));
+        CS_CHECK(ParseTuple, pcmcia_parse_tuple(pdev, &tuple, parse));
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+        pdev->conf.ConfigBase = parse->config.base;
+        pdev->conf.Present = parse->config.rmask[0];
+#else
+        link->conf.ConfigBase = parse->config.base;
+        link->conf.Present = parse->config.rmask[0];
+
+	link->conf.Vcc = socketconf.Vcc;
+#endif
+        CS_CHECK(GetConfigurationInfo,
+                 pcmcia_get_configuration_info(pdev, &socketconf));
+
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
+        for (;;) {
+		cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
+                CFG_CHECK(GetTupleData,
+                           pcmcia_get_tuple_data(pdev, &tuple));
+                CFG_CHECK(ParseTuple,
+                           pcmcia_parse_tuple(pdev, &tuple, parse));
+
+                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+                        dflt = *cfg;
+                if (cfg->index == 0)
+                        goto next_entry;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+                pdev->conf.ConfigIndex = cfg->index;
+#else
+                link->conf.ConfigIndex = cfg->index;
+#endif
+
+                /* Does this card need audio output? */
+                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+                        pdev->conf.Attributes |= CONF_ENABLE_SPKR;
+                        pdev->conf.Status = CCSR_AUDIO_ENA;
+#else
+                        link->conf.Attributes |= CONF_ENABLE_SPKR;
+                        link->conf.Status = CCSR_AUDIO_ENA;
+#endif
+                }
+
+                /* Use power settings for Vcc and Vpp if present */
+                /*  Note that the CIS values need to be rescaled */
+                if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                        if (socketconf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+                            10000 && !prism2_ignorevcc) {
+                                WLAN_LOG_DEBUG(1, "  Vcc mismatch - skipping"
+                                       " this entry\n");
+                                goto next_entry;
+                        }
+                } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                        if (socketconf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
+                            10000 && !prism2_ignorevcc) {
+                                WLAN_LOG_DEBUG(1, "  Vcc (default) mismatch "
+                                       "- skipping this entry\n");
+                                goto next_entry;
+                        }
+                }
+
+                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+                        pdev->conf.Vpp =
+                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+#else
+                        link->conf.Vpp1 = link->conf.Vpp2 =
+                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+#endif
+                } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+                        pdev->conf.Vpp =
+                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+#else
+                        link->conf.Vpp1 = link->conf.Vpp2 =
+                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+#endif
+		}
+
+		/* Do we need to allocate an interrupt? */
+		/* HACK: due to a bad CIS....we ALWAYS need an interrupt */
+		/* if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+		pdev->conf.Attributes |= CONF_ENABLE_IRQ;
+#else
+		link->conf.Attributes |= CONF_ENABLE_IRQ;
+#endif
+
+		/* IO window settings */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+		pdev->io.NumPorts1 = pdev->io.NumPorts2 = 0;
+		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+			if (!(io->flags & CISTPL_IO_8BIT))
+				pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+			if (!(io->flags & CISTPL_IO_16BIT))
+				pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+			pdev->io.BasePort1 = io->win[0].base;
+			if  ( pdev->io.BasePort1 != 0 ) {
+				WLAN_LOG_WARNING(
+				"Brain damaged CIS: hard coded iobase="
+				"0x%x, try letting pcmcia_cs decide...\n",
+				pdev->io.BasePort1 );
+				pdev->io.BasePort1 = 0;
+			}
+			pdev->io.NumPorts1 = io->win[0].len;
+			if (io->nwin > 1) {
+				pdev->io.Attributes2 = pdev->io.Attributes1;
+				pdev->io.BasePort2 = io->win[1].base;
+				pdev->io.NumPorts2 = io->win[1].len;
+			}
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		CFG_CHECK(RequestIO, pcmcia_request_io(pdev, &pdev->io));
+#else
+		link->io.NumPorts1 = link->io.NumPorts2 = 0;
+		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+			if (!(io->flags & CISTPL_IO_8BIT))
+				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+			if (!(io->flags & CISTPL_IO_16BIT))
+				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+			link->io.BasePort1 = io->win[0].base;
+			if  ( link->io.BasePort1 != 0 ) {
+				WLAN_LOG_WARNING(
+				"Brain damaged CIS: hard coded iobase="
+				"0x%x, try letting pcmcia_cs decide...\n",
+				link->io.BasePort1 );
+				link->io.BasePort1 = 0;
+			}
+			link->io.NumPorts1 = io->win[0].len;
+			if (io->nwin > 1) {
+				link->io.Attributes2 = link->io.Attributes1;
+				link->io.BasePort2 = io->win[1].base;
+				link->io.NumPorts2 = io->win[1].len;
+			}
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		CFG_CHECK(RequestIO, pcmcia_request_io(pdev, &link->io));
+#endif
+		/* If we got this far, we're cool! */
+		break;
+
+	next_entry:
+		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+			dflt = *cfg;
+		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
+
+	}
+
+	/* Let pcmcia know the device name */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	pdev->dev_node = &hw->node;
+#else
+	link->dev = &hw->node;
+#endif
+
+	/* Register the network device and get assigned a name */
+	SET_MODULE_OWNER(wlandev->netdev);
+	SET_NETDEV_DEV(wlandev->netdev,  &handle_to_dev(pdev));
+	if (register_wlandev(wlandev) != 0) {
+		WLAN_LOG_NOTICE("prism2sta_cs: register_wlandev() failed.\n");
+		goto failed;
+	}
+
+	strcpy(hw->node.dev_name, wlandev->name);
+
+	/* Allocate an interrupt line.  Note that this does not assign a */
+	/* handler to the interrupt, unless the 'Handler' member of the */
+	/* irq structure is initialized. */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	if (pdev->conf.Attributes & CONF_ENABLE_IRQ) {
+		pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+		pdev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+		pdev->irq.Handler = hfa384x_interrupt;
+		pdev->irq.Instance = wlandev;
+		CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
+	}
+#else
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+		link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+		link->irq.Handler = hfa384x_interrupt;
+		link->irq.Instance = wlandev;
+		CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &link->irq));
+	}
+#endif
+
+	/* This actually configures the PCMCIA socket -- setting up */
+	/* the I/O windows and the interrupt mapping, and putting the */
+	/* card and host interface into "Memory and IO" mode. */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
+#else
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &link->conf));
+#endif
+
+	/* Fill the netdevice with this info */
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	wlandev->netdev->irq = pdev->irq.AssignedIRQ;
+	wlandev->netdev->base_addr = pdev->io.BasePort1;
+#else
+	wlandev->netdev->irq = link->irq.AssignedIRQ;
+	wlandev->netdev->base_addr = link->io.BasePort1;
+#endif
+
+	/* And the rest of the hw structure */
+	hw->irq = wlandev->netdev->irq;
+	hw->iobase = wlandev->netdev->base_addr;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
+	link->state |= DEV_CONFIG;
+	link->state &= ~DEV_CONFIG_PENDING;
+#endif
+
+	/* And now we're done! */
+	wlandev->msdstate = WLAN_MSD_HWPRESENT;
+
+	goto done;
+
+ cs_failed:
+        cs_error(pdev, last_fn, last_ret);
+
+failed:
+	// wlandev, hw, etc etc..
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	pdev->priv = NULL;
+#else
+	pdev->instance = NULL;
+	if (link) {
+		link->priv = NULL;
+		kfree(link);
+	}
+#endif
+	if (wlandev) {
+		wlan_unsetup(wlandev);
+		if (wlandev->priv) {
+			hw = wlandev->priv;
+			wlandev->priv = NULL;
+			if (hw) {
+				hfa384x_destroy(hw);
+				kfree(hw);
+			}
+		}
+		kfree(wlandev);
+	}
+
+done:
+	if (parse) kfree(parse);
+
+	DBFEXIT;
+	return rval;
+}
+#else  // <= 2.6.15
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+#define CFG_CHECK(fn, retf) \
+do { int ret = (retf); \
+if (ret != 0) { \
+        WLAN_LOG_DEBUG(1, "CardServices(" #fn ") returned %d\n", ret); \
+        cs_error(link->handle, fn, ret); \
+        goto next_entry; \
+} \
+} while (0)
+
+/*----------------------------------------------------------------
+* prism2sta_attach
+*
+* Half of the attach/detach pair.  Creates and registers a device
+* instance with Card Services.  In this case, it also creates the
+* wlandev structure and device private structure.  These are
+* linked to the device instance via its priv member.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	A valid ptr to dev_link_t on success, NULL otherwise
+*
+* Side effects:
+*
+*
+* Call context:
+*	process thread (insmod/init_module/register_pccard_driver)
+----------------------------------------------------------------*/
+dev_link_t *prism2sta_attach(void)
+{
+	client_reg_t		client_reg;
+	int			result;
+	dev_link_t		*link = NULL;
+	wlandevice_t		*wlandev = NULL;
+	hfa384x_t		*hw = NULL;
+
+	DBFENTER;
+
+	/* Alloc our structures */
+	link =		kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+
+	if (!link || ((wlandev = create_wlan()) == NULL)) {
+		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+		result = -EIO;
+		goto failed;
+	}
+	hw = wlandev->priv;
+
+	/* Clear all the structs */
+	memset(link, 0, sizeof(struct dev_link_t));
+
+	if ( wlan_setup(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
+		result = -EIO;
+		goto failed;
+	}
+
+	/* Initialize the hw struct for now */
+	hfa384x_create(hw, 0, 0, NULL);
+	hw->wlandev = wlandev;
+
+	/* Initialize the PC card device object. */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+	init_timer(&link->release);
+	link->release.function = &prism2sta_release;
+	link->release.data = (u_long)link;
+#endif
+	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->priv = wlandev;
+#if (defined(CS_RELEASE_CODE) && (CS_RELEASE_CODE < 0x2911))
+	link->irq.Instance = wlandev;
+#endif
+
+	/* Link in to the list of devices managed by this driver */
+	link->next = dev_list;
+	dev_list = link;
+
+	/* Register with Card Services */
+	client_reg.dev_info = &dev_info;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
+	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) )
+	client_reg.EventMask =
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_RESET_REQUEST |
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.event_handler = &prism2sta_event;
+#endif
+
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+
+	result = pcmcia_register_client(&link->handle, &client_reg);
+	if (result != 0) {
+		cs_error(link->handle, RegisterClient, result);
+		prism2sta_detach(link);
+		return NULL;
+	}
+
+	goto done;
+
+ failed:
+	if (link)	kfree(link);
+	if (wlandev)	kfree(wlandev);
+	if (hw)		kfree(hw);
+	link = NULL;
+
+ done:
+	DBFEXIT;
+	return link;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_detach
+*
+* Remove one of the device instances managed by this driver.
+*   Search the list for the given instance,
+*   check our flags for a waiting timer'd release call
+*   call release
+*   Deregister the instance with Card Services
+*   (netdevice) unregister the network device.
+*   unlink the instance from the list
+*   free the link, priv, and priv->priv memory
+* Note: the dev_list variable is a driver scoped static used to
+*	maintain a list of device instances managed by this
+*	driver.
+*
+* Arguments:
+*	link	ptr to the instance to detach
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	the link structure is gone, the netdevice is gone
+*
+* Call context:
+*	Might be interrupt, don't block.
+----------------------------------------------------------------*/
+void prism2sta_detach(dev_link_t *link)
+{
+	dev_link_t		**linkp;
+	wlandevice_t		*wlandev;
+	hfa384x_t		*hw;
+
+	DBFENTER;
+
+	/* Locate prev device structure */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
+		if (*linkp == link) break;
+	}
+
+	if (*linkp != NULL) {
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+		unsigned long	flags;
+		/* Get rid of any timer'd release call */
+		save_flags(flags);
+		cli();
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+		if (link->state & DEV_RELEASE_PENDING) {
+			del_timer_sync(&link->release);
+			link->state &= ~DEV_RELEASE_PENDING;
+		}
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+		restore_flags(flags);
+#endif
+
+		/* If link says we're still config'd, call release */
+		if (link->state & DEV_CONFIG) {
+			prism2sta_release((u_long)link);
+			if (link->state & DEV_STALE_CONFIG) {
+				link->state |= DEV_STALE_LINK;
+				return;
+			}
+		}
+
+		/* Tell Card Services we're not around any more */
+		if (link->handle) {
+			pcmcia_deregister_client(link->handle);
+		}
+
+		/* Unlink device structure, free bits */
+		*linkp = link->next;
+		if ( link->priv != NULL ) {
+			wlandev = (wlandevice_t*)link->priv;
+			p80211netdev_hwremoved(wlandev);
+			if (link->dev != NULL) {
+				unregister_wlandev(wlandev);
+			}
+			wlan_unsetup(wlandev);
+			if (wlandev->priv) {
+				hw = wlandev->priv;
+				wlandev->priv = NULL;
+				if (hw) {
+					hfa384x_destroy(hw);
+					kfree(hw);
+				}
+			}
+			link->priv = NULL;
+			kfree(wlandev);
+		}
+		kfree(link);
+	}
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_config
+*
+* Half of the config/release pair.  Usually called in response to
+* a card insertion event.  At this point, we _know_ there's some
+* physical device present.  That means we can start poking around
+* at the CIS and at any device specific config data we want.
+*
+* Note the gotos and the macros.  I recoded this once without
+* them, and it got incredibly ugly.  It's actually simpler with
+* them.
+*
+* Arguments:
+*	link	the dev_link_t structure created in attach that
+*		represents this device instance.
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	Resources (irq, io, mem) are allocated
+*	The pcmcia dev_link->node->name is set
+*	(For netcards) The device structure is finished and,
+*	  most importantly, registered.  This means that there
+*	  is now a _named_ device that can be configured from
+*	  userland.
+*
+* Call context:
+*	May be called from a timer.  Don't block!
+----------------------------------------------------------------*/
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+#define CFG_CHECK(fn, retf) \
+do { int ret = (retf); \
+if (ret != 0) { \
+        WLAN_LOG_DEBUG(1, "CardServices(" #fn ") returned %d\n", ret); \
+        cs_error(link->handle, fn, ret); \
+        goto next_entry; \
+} \
+} while (0)
+
+void prism2sta_config(dev_link_t *link)
+{
+	client_handle_t		handle;
+	wlandevice_t		*wlandev;
+	hfa384x_t               *hw;
+	int			last_fn;
+	int			last_ret;
+	tuple_t			tuple;
+	cisparse_t		parse;
+	config_info_t		socketconf;
+	UINT8			buf[64];
+	int			minVcc = 0;
+	int			maxVcc = 0;
+	cistpl_cftable_entry_t	dflt = { 0 };
+
+	DBFENTER;
+
+	handle = link->handle;
+	wlandev = (wlandevice_t*)link->priv;
+	hw = wlandev->priv;
+
+	/* Collect the config register info */
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+
+	/* Acquire the current socket config (need Vcc setting) */
+	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &socketconf));
+
+	/* Loop through the config table entries until we find one that works */
+	/* Assumes a complete and valid CIS */
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	while (1) {
+		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+		CFG_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+		CFG_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+
+		if (cfg->index == 0) goto next_entry;
+		link->conf.ConfigIndex = cfg->index;
+
+		/* Lets print out the Vcc that the controller+pcmcia-cs set
+		 * for us, cause that's what we're going to use.
+		 */
+		WLAN_LOG_DEBUG(1,"Initial Vcc=%d/10v\n", socketconf.Vcc);
+		if (prism2_ignorevcc) {
+			link->conf.Vcc = socketconf.Vcc;
+			goto skipvcc;
+		}
+
+		/* Use power settings for Vcc and Vpp if present */
+		/* Note that the CIS values need to be rescaled */
+		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			WLAN_LOG_DEBUG(1, "Vcc obtained from curtupl.VNOM\n");
+			minVcc = maxVcc =
+				cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
+		} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			WLAN_LOG_DEBUG(1, "Vcc set from dflt.VNOM\n");
+			minVcc = maxVcc =
+				dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
+		} else if ((cfg->vcc.present & (1<<CISTPL_POWER_VMAX)) &&
+			   (cfg->vcc.present & (1<<CISTPL_POWER_VMIN)) ) {
+			WLAN_LOG_DEBUG(1, "Vcc set from curtupl(VMIN,VMAX)\n");			minVcc = cfg->vcc.param[CISTPL_POWER_VMIN]/10000;
+			maxVcc = cfg->vcc.param[CISTPL_POWER_VMAX]/10000;
+		} else if ((dflt.vcc.present & (1<<CISTPL_POWER_VMAX)) &&
+			   (dflt.vcc.present & (1<<CISTPL_POWER_VMIN)) ) {
+			WLAN_LOG_DEBUG(1, "Vcc set from dflt(VMIN,VMAX)\n");
+			minVcc = dflt.vcc.param[CISTPL_POWER_VMIN]/10000;
+			maxVcc = dflt.vcc.param[CISTPL_POWER_VMAX]/10000;
+		}
+
+		if ( socketconf.Vcc >= minVcc && socketconf.Vcc <= maxVcc) {
+			link->conf.Vcc = socketconf.Vcc;
+		} else {
+			/* [MSM]: Note that I've given up trying to change
+			 * the Vcc if a change is indicated.  It seems the
+			 * system&socketcontroller&card vendors can't seem
+			 * to get it right, so I'm tired of trying to hack
+			 * my way around it.  pcmcia-cs does its best using
+			 * the voltage sense pins but sometimes the controller
+			 * lies.  Then, even if we have a good read on the VS
+			 * pins, some system designs will silently ignore our
+			 * requests to set the voltage.  Additionally, some
+			 * vendors have 3.3v indicated on their sense pins,
+			 * but 5v specified in the CIS or vice-versa.  I've
+			 * had it.  My only recommendation is "let the buyer
+			 * beware".  Your system might supply 5v to a 3v card
+			 * (possibly causing damage) or a 3v capable system
+			 * might supply 5v to a 3v capable card (wasting
+			 * precious battery life).
+			 * My only recommendation (if you care) is to get
+			 * yourself an extender card (I don't know where, I
+			 * have only one myself) and a meter and test it for
+			 * yourself.
+			 */
+			goto next_entry;
+		}
+skipvcc:
+		WLAN_LOG_DEBUG(1, "link->conf.Vcc=%d\n", link->conf.Vcc);
+
+		/* Do we need to allocate an interrupt? */
+		/* HACK: due to a bad CIS....we ALWAYS need an interrupt */
+		/* if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) */
+			link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+		/* IO window settings */
+		link->io.NumPorts1 = link->io.NumPorts2 = 0;
+		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+			if (!(io->flags & CISTPL_IO_8BIT))
+				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+			if (!(io->flags & CISTPL_IO_16BIT))
+				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+			link->io.BasePort1 = io->win[0].base;
+			if  ( link->io.BasePort1 != 0 ) {
+				WLAN_LOG_WARNING(
+				"Brain damaged CIS: hard coded iobase="
+				"0x%x, try letting pcmcia_cs decide...\n",
+				link->io.BasePort1 );
+				link->io.BasePort1 = 0;
+			}
+			link->io.NumPorts1 = io->win[0].len;
+			if (io->nwin > 1) {
+				link->io.Attributes2 = link->io.Attributes1;
+				link->io.BasePort2 = io->win[1].base;
+				link->io.NumPorts2 = io->win[1].len;
+			}
+		}
+
+		/* This reserves IO space but doesn't actually enable it */
+		CFG_CHECK(RequestIO, pcmcia_request_io(link->handle, &link->io));
+
+		/* If we got this far, we're cool! */
+		break;
+
+next_entry:
+		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+			dflt = *cfg;
+		CS_CHECK(GetNextTuple,
+                         pcmcia_get_next_tuple(handle, &tuple));
+	}
+
+	/* Allocate an interrupt line.  Note that this does not assign a */
+	/* handler to the interrupt, unless the 'Handler' member of the */
+	/* irq structure is initialized. */
+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
+	{
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
+		int			i;
+		link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
+		if (irq_list[0] == -1)
+			link->irq.IRQInfo2 = irq_mask;
+		else
+			for (i=0; i<4; i++)
+				link->irq.IRQInfo2 |= 1 << irq_list[i];
+#else
+		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+#endif
+		link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+		link->irq.Handler = hfa384x_interrupt;
+		link->irq.Instance = wlandev;
+		CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+	}
+
+	/* This actually configures the PCMCIA socket -- setting up */
+	/* the I/O windows and the interrupt mapping, and putting the */
+	/* card and host interface into "Memory and IO" mode. */
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+
+	/* Fill the netdevice with this info */
+	wlandev->netdev->irq = link->irq.AssignedIRQ;
+	wlandev->netdev->base_addr = link->io.BasePort1;
+
+	/* Report what we've done */
+	WLAN_LOG_INFO("%s: index 0x%02x: Vcc %d.%d",
+		dev_info, link->conf.ConfigIndex,
+		link->conf.Vcc/10, link->conf.Vcc%10);
+	if (link->conf.Vpp1)
+		printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
+		printk(", irq %d", link->irq.AssignedIRQ);
+	if (link->io.NumPorts1)
+		printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1);
+	if (link->io.NumPorts2)
+		printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1);
+	printk("\n");
+
+	link->state &= ~DEV_CONFIG_PENDING;
+
+	/* Let pcmcia know the device name */
+	link->dev = &hw->node;
+
+	/* Register the network device and get assigned a name */
+	SET_MODULE_OWNER(wlandev->netdev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,11) )
+	SET_NETDEV_DEV(wlandev->netdev,  &handle_to_dev(link->handle));
+#endif
+	if (register_wlandev(wlandev) != 0) {
+		WLAN_LOG_NOTICE("prism2sta_cs: register_wlandev() failed.\n");
+		goto failed;
+	}
+
+	strcpy(hw->node.dev_name, wlandev->name);
+
+	/* Any device custom config/query stuff should be done here */
+	/* For a netdevice, we should at least grab the mac address */
+
+	return;
+cs_failed:
+	cs_error(link->handle, last_fn, last_ret);
+	WLAN_LOG_ERROR("NextTuple failure? It's probably a Vcc mismatch.\n");
+
+failed:
+	prism2sta_release((u_long)link);
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_release
+*
+* Half of the config/release pair.  Usually called in response to
+* a card ejection event.  Checks to make sure no higher layers
+* are still (or think they are) using the card via the link->open
+* field.
+*
+* NOTE: Don't forget to increment the link->open variable in the
+*  device_open method, and decrement it in the device_close
+*  method.
+*
+* Arguments:
+*	arg	a generic 32 bit variable.  It's the value that
+*		we assigned to link->release.data in sta_attach().
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*	All resources should be released after this function
+*	executes and finds the device !open.
+*
+* Call context:
+*	Possibly in a timer context.  Don't do anything that'll
+*	block.
+----------------------------------------------------------------*/
+void prism2sta_release(u_long arg)
+{
+        dev_link_t	*link = (dev_link_t *)arg;
+
+	DBFENTER;
+
+	/* First thing we should do is get the MSD back to the
+	 * HWPRESENT state.  I.e. everything quiescent.
+	 */
+	prism2sta_ifstate(link->priv, P80211ENUM_ifstate_disable);
+
+        if (link->open) {
+		/* TODO: I don't think we're even using this bit of code
+		 * and I don't think it's hurting us at the moment.
+		 */
+                WLAN_LOG_DEBUG(1,
+			"prism2sta_cs: release postponed, '%s' still open\n",
+			link->dev->dev_name);
+                link->state |= DEV_STALE_CONFIG;
+                return;
+        }
+
+        pcmcia_release_configuration(link->handle);
+        pcmcia_release_io(link->handle, &link->io);
+        pcmcia_release_irq(link->handle, &link->irq);
+
+        link->state &= ~(DEV_CONFIG | DEV_RELEASE_PENDING);
+
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_event
+*
+* Handler for card services events.
+*
+* Arguments:
+*	event		The event code
+*	priority	hi/low - REMOVAL is the only hi
+*	args		ptr to card services struct containing info about
+*			pcmcia status
+*
+* Returns:
+*	Zero on success, non-zero otherwise
+*
+* Side effects:
+*
+*
+* Call context:
+*	Both interrupt and process thread, depends on the event.
+----------------------------------------------------------------*/
+static int
+prism2sta_event (
+	event_t event,
+	int priority,
+	event_callback_args_t *args)
+{
+	int			result = 0;
+	dev_link_t		*link = (dev_link_t *) args->client_data;
+	wlandevice_t		*wlandev = (wlandevice_t*)link->priv;
+	hfa384x_t		*hw = NULL;
+
+	DBFENTER;
+
+	if (wlandev) hw = wlandev->priv;
+
+	switch (event)
+	{
+	case CS_EVENT_CARD_INSERTION:
+		WLAN_LOG_DEBUG(5,"event is INSERTION\n");
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		prism2sta_config(link);
+		if (!(link->state & DEV_CONFIG)) {
+			wlandev->netdev->irq = 0;
+			WLAN_LOG_ERROR(
+				"%s: Initialization failed!\n", dev_info);
+			wlandev->msdstate = WLAN_MSD_HWFAIL;
+			break;
+		}
+
+		/* Fill in the rest of the hw struct */
+		hw->irq = wlandev->netdev->irq;
+		hw->iobase = wlandev->netdev->base_addr;
+		hw->link = link;
+
+		if (prism2_doreset) {
+			result = hfa384x_corereset(hw,
+					prism2_reset_holdtime,
+					prism2_reset_settletime, 0);
+			if ( result ) {
+				WLAN_LOG_ERROR(
+					"corereset() failed, result=%d.\n",
+					result);
+				wlandev->msdstate = WLAN_MSD_HWFAIL;
+				break;
+			}
+		}
+
+#if 0
+		/*
+		 * TODO: test_hostif() not implemented yet.
+		 */
+		result = hfa384x_test_hostif(hw);
+		if (result) {
+			WLAN_LOG_ERROR(
+			"test_hostif() failed, result=%d.\n", result);
+			wlandev->msdstate = WLAN_MSD_HWFAIL;
+			break;
+		}
+#endif
+		wlandev->msdstate = WLAN_MSD_HWPRESENT;
+		break;
+
+	case CS_EVENT_CARD_REMOVAL:
+		WLAN_LOG_DEBUG(5,"event is REMOVAL\n");
+		link->state &= ~DEV_PRESENT;
+
+		if (wlandev) {
+			p80211netdev_hwremoved(wlandev);
+		}
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+		if (link->state & DEV_CONFIG)
+		{
+			link->release.expires = jiffies + (HZ/20);
+			add_timer(&link->release);
+		}
+#endif
+		break;
+	case CS_EVENT_RESET_REQUEST:
+		WLAN_LOG_DEBUG(5,"event is RESET_REQUEST\n");
+		WLAN_LOG_NOTICE(
+			"prism2 card reset not supported "
+			"due to post-reset user mode configuration "
+			"requirements.\n");
+		WLAN_LOG_NOTICE(
+			"  From user mode, use "
+			"'cardctl suspend;cardctl resume' "
+			"instead.\n");
+		break;
+	case CS_EVENT_RESET_PHYSICAL:
+	case CS_EVENT_CARD_RESET:
+		WLAN_LOG_WARNING("Rx'd CS_EVENT_RESET_xxx, should not "
+			"be possible since RESET_REQUEST was denied.\n");
+		break;
+
+	case CS_EVENT_PM_SUSPEND:
+		WLAN_LOG_DEBUG(5,"event is SUSPEND\n");
+		link->state |= DEV_SUSPEND;
+		if (link->state & DEV_CONFIG)
+		{
+			prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+			pcmcia_release_configuration(link->handle);
+		}
+		break;
+
+	case CS_EVENT_PM_RESUME:
+		WLAN_LOG_DEBUG(5,"event is RESUME\n");
+		link->state &= ~DEV_SUSPEND;
+		if (link->state & DEV_CONFIG) {
+			pcmcia_request_configuration(link->handle, &link->conf);
+		}
+		break;
+	}
+
+	DBFEXIT;
+	return 0;  /* noone else does anthing with the return value */
+}
+#endif // <= 2.6.15
+
+
+
+int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
+{
+	int		result = 0;
+	conf_reg_t	reg;
+	UINT8		corsave;
+	DBFENTER;
+
+	WLAN_LOG_DEBUG(3, "Doing reset via CardServices().\n");
+
+	/* Collect COR */
+	reg.Function = 0;
+	reg.Action = CS_READ;
+	reg.Offset = CISREG_COR;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	result = pcmcia_access_configuration_register(hw->pdev, &reg);
+#else
+	result = pcmcia_access_configuration_register(
+			hw->link->handle,
+			&reg);
+#endif
+	if (result != CS_SUCCESS ) {
+		WLAN_LOG_ERROR(
+			":0: AccessConfigurationRegister(CS_READ) failed,"
+			"result=%d.\n", result);
+		result = -EIO;
+	}
+	corsave = reg.Value;
+
+	/* Write reset bit (BIT7) */
+	reg.Value |= BIT7;
+	reg.Action = CS_WRITE;
+	reg.Offset = CISREG_COR;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	result = pcmcia_access_configuration_register(hw->pdev, &reg);
+#else
+	result = pcmcia_access_configuration_register(
+			hw->link->handle,
+			&reg);
+#endif
+	if (result != CS_SUCCESS ) {
+		WLAN_LOG_ERROR(
+			":1: AccessConfigurationRegister(CS_WRITE) failed,"
+			"result=%d.\n", result);
+		result = -EIO;
+	}
+
+	/* Hold for holdtime */
+	mdelay(holdtime);
+
+	if (genesis) {
+		reg.Value = genesis;
+		reg.Action = CS_WRITE;
+		reg.Offset = CISREG_CCSR;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+		result = pcmcia_access_configuration_register(hw->pdev, &reg);
+#else
+		result = pcmcia_access_configuration_register(
+				      hw->link->handle,
+				      &reg);
+#endif
+		if (result != CS_SUCCESS ) {
+			WLAN_LOG_ERROR(
+				":1: AccessConfigurationRegister(CS_WRITE) failed,"
+				"result=%d.\n", result);
+			result = -EIO;
+		}
+	}
+
+	/* Hold for holdtime */
+	mdelay(holdtime);
+
+	/* Clear reset bit */
+	reg.Value &= ~BIT7;
+	reg.Action = CS_WRITE;
+	reg.Offset = CISREG_COR;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	result = pcmcia_access_configuration_register(hw->pdev, &reg);
+#else
+	result = pcmcia_access_configuration_register(
+				      hw->link->handle,
+				      &reg);
+#endif
+	if (result != CS_SUCCESS ) {
+		WLAN_LOG_ERROR(
+			":2: AccessConfigurationRegister(CS_WRITE) failed,"
+			"result=%d.\n", result);
+		result = -EIO;
+		goto done;
+	}
+
+	/* Wait for settletime */
+	mdelay(settletime);
+
+	/* Set non-reset bits back what they were */
+	reg.Value = corsave;
+	reg.Action = CS_WRITE;
+	reg.Offset = CISREG_COR;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,16)
+	result = pcmcia_access_configuration_register(hw->pdev, &reg);
+#else
+	result = pcmcia_access_configuration_register(
+				      hw->link->handle,
+				      &reg);
+#endif
+	if (result != CS_SUCCESS ) {
+		WLAN_LOG_ERROR(
+			":2: AccessConfigurationRegister(CS_WRITE) failed,"
+			"result=%d.\n", result);
+		result = -EIO;
+		goto done;
+	}
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+#ifdef MODULE
+
+static int __init prism2cs_init(void)
+{
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
+	servinfo_t	serv;
+#endif
+
+	DBFENTER;
+
+        WLAN_LOG_NOTICE("%s Loaded\n", version);
+        WLAN_LOG_NOTICE("dev_info is: %s\n", dev_info);
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
+	pcmcia_get_card_services_info(&serv);
+	if ( serv.Revision != CS_RELEASE_CODE )
+	{
+		printk(KERN_NOTICE"%s: CardServices release does not match!\n", dev_info);
+		return -1;
+	}
+
+	/* This call will result in a call to prism2sta_attach */
+	/*   and eventually prism2sta_detach */
+	register_pccard_driver( &dev_info, &prism2sta_attach, &prism2sta_detach);
+#else
+	pcmcia_register_driver(&prism2_cs_driver);
+#endif
+
+	DBFEXIT;
+	return 0;
+}
+
+static void __exit prism2cs_cleanup(void)
+{
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
+        dev_link_t *link = dev_list;
+        dev_link_t *nlink;
+        DBFENTER;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
+	for (link=dev_list; link != NULL; link = nlink) {
+		nlink = link->next;
+		if ( link->state & DEV_CONFIG ) {
+			prism2sta_release((u_long)link);
+		}
+		prism2sta_detach(link); /* remember detach() frees link */
+	}
+#endif
+
+	unregister_pccard_driver( &dev_info);
+#else
+	pcmcia_unregister_driver(&prism2_cs_driver);
+#endif
+
+        printk(KERN_NOTICE "%s Unloaded\n", version);
+
+        DBFEXIT;
+        return;
+}
+
+module_init(prism2cs_init);
+module_exit(prism2cs_cleanup);
+
+#endif // MODULE
+
diff --git a/drivers/staging/wlan-ng/prism2_pci.c b/drivers/staging/wlan-ng/prism2_pci.c
new file mode 100644
index 0000000..afe32df
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2_pci.c
@@ -0,0 +1,332 @@
+#define WLAN_HOSTIF WLAN_PCI
+#include "hfa384x.c"
+#include "prism2mgmt.c"
+#include "prism2mib.c"
+#include "prism2sta.c"
+
+#define PCI_SIZE		0x1000		/* Memory size - 4K bytes */
+
+/* ISL3874A 11Mb/s WLAN controller */
+#define PCIVENDOR_INTERSIL	0x1260UL
+#define PCIDEVICE_ISL3874	0x3873UL /* [MSM] yeah I know...the ID says
+					    3873. Trust me, it's a 3874. */
+
+/* Samsung SWL-2210P 11Mb/s WLAN controller (uses ISL3874A) */
+#define PCIVENDOR_SAMSUNG      0x167dUL
+#define PCIDEVICE_SWL_2210P    0xa000UL
+
+#define PCIVENDOR_NETGEAR      0x1385UL /* for MA311 */
+
+/* PCI Class & Sub-Class code, Network-'Other controller' */
+#define PCI_CLASS_NETWORK_OTHERS 0x280
+
+
+/*----------------------------------------------------------------
+* prism2sta_probe_pci
+*
+* Probe routine called when a PCI device w/ matching ID is found.
+* The ISL3874 implementation uses the following map:
+*   BAR0: Prism2.x registers memory mapped, size=4k
+* Here's the sequence:
+*   - Allocate the PCI resources.
+*   - Read the PCMCIA attribute memory to make sure we have a WLAN card
+*   - Reset the MAC
+*   - Initialize the netdev and wlan data
+*   - Initialize the MAC
+*
+* Arguments:
+*	pdev		ptr to pci device structure containing info about
+*			pci configuration.
+*	id		ptr to the device id entry that matched this device.
+*
+* Returns:
+*	zero		- success
+*	negative	- failed
+*
+* Side effects:
+*
+*
+* Call context:
+*	process thread
+*
+----------------------------------------------------------------*/
+static int __devinit
+prism2sta_probe_pci(
+	struct pci_dev *pdev,
+	const struct pci_device_id *id)
+{
+	int		result;
+	phys_t		phymem = 0;
+	void		__iomem *mem = NULL;
+        wlandevice_t    *wlandev = NULL;
+	hfa384x_t	*hw = NULL;
+
+	DBFENTER;
+
+	/* Enable the pci device */
+	if (pci_enable_device(pdev)) {
+		WLAN_LOG_ERROR("%s: pci_enable_device() failed.\n", dev_info);
+		result = -EIO;
+		goto fail;
+	}
+
+	/* Figure out our resources */
+	phymem = pci_resource_start(pdev, 0);
+
+        if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) {
+		printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n");
+		result = -EIO;
+		goto fail;
+        }
+
+	mem = ioremap(phymem, PCI_SIZE);
+	if ( mem == 0 ) {
+		WLAN_LOG_ERROR("%s: ioremap() failed.\n", dev_info);
+		result = -EIO;
+		goto fail;
+	}
+
+	/* Log the device */
+        WLAN_LOG_INFO("A Prism2.5 PCI device found, "
+		"phymem:0x%llx, irq:%d, mem:0x%p\n",
+		(unsigned long long)phymem, pdev->irq, mem);
+
+	if ((wlandev = create_wlan()) == NULL) {
+		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+		result = -EIO;
+		goto fail;
+	}
+	hw = wlandev->priv;
+
+	if ( wlan_setup(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
+		result = -EIO;
+		goto fail;
+	}
+
+	/* Setup netdevice's ability to report resources
+	 * Note: the netdevice was allocated by wlan_setup()
+	 */
+        wlandev->netdev->irq = pdev->irq;
+        wlandev->netdev->mem_start = (unsigned long) mem;
+        wlandev->netdev->mem_end = wlandev->netdev->mem_start +
+		pci_resource_len(pdev, 0);
+
+	/* Initialize the hw data */
+        hfa384x_create(hw, wlandev->netdev->irq, 0, mem);
+	hw->wlandev = wlandev;
+
+	/* Register the wlandev, this gets us a name and registers the
+	 * linux netdevice.
+	 */
+	SET_MODULE_OWNER(wlandev->netdev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+       SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
+#endif
+        if ( register_wlandev(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
+		result = -EIO;
+		goto fail;
+        }
+
+#if 0
+	/* TODO: Move this and an irq test into an hfa384x_testif() routine.
+	 */
+	outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
+	reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
+	if ( reg != PRISM2STA_MAGIC ) {
+		WLAN_LOG_ERROR("MAC register access test failed!\n");
+		result = -EIO;
+		goto fail;
+	}
+#endif
+
+	/* Do a chip-level reset on the MAC */
+	if (prism2_doreset) {
+		result = hfa384x_corereset(hw,
+				prism2_reset_holdtime,
+				prism2_reset_settletime, 0);
+		if (result != 0) {
+			WLAN_LOG_ERROR(
+				"%s: hfa384x_corereset() failed.\n",
+				dev_info);
+			unregister_wlandev(wlandev);
+			hfa384x_destroy(hw);
+			result = -EIO;
+			goto fail;
+		}
+	}
+
+        pci_set_drvdata(pdev, wlandev);
+
+	/* Shouldn't actually hook up the IRQ until we
+	 * _know_ things are alright.  A test routine would help.
+	 */
+       	request_irq(wlandev->netdev->irq, hfa384x_interrupt,
+		SA_SHIRQ, wlandev->name, wlandev);
+
+	wlandev->msdstate = WLAN_MSD_HWPRESENT;
+
+	result = 0;
+	goto done;
+
+ fail:
+	pci_set_drvdata(pdev, NULL);
+	if (wlandev)	kfree(wlandev);
+	if (hw)		kfree(hw);
+        if (mem)        iounmap(mem);
+	pci_release_regions(pdev);
+        pci_disable_device(pdev);
+
+ done:
+	DBFEXIT;
+	return result;
+}
+
+static void __devexit prism2sta_remove_pci(struct pci_dev *pdev)
+{
+       	wlandevice_t		*wlandev;
+	hfa384x_t	*hw;
+
+	wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
+	hw = wlandev->priv;
+
+	p80211netdev_hwremoved(wlandev);
+
+	/* reset hardware */
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+
+        if (pdev->irq)
+		free_irq(pdev->irq, wlandev);
+
+	unregister_wlandev(wlandev);
+
+	/* free local stuff */
+	if (hw) {
+		hfa384x_destroy(hw);
+		kfree(hw);
+	}
+
+	iounmap((void __iomem *)wlandev->netdev->mem_start);
+	wlan_unsetup(wlandev);
+
+	pci_release_regions(pdev);
+        pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	kfree(wlandev);
+}
+
+
+static struct pci_device_id pci_id_tbl[] = {
+	{
+		PCIVENDOR_INTERSIL, PCIDEVICE_ISL3874,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller"
+	},
+	{
+		PCIVENDOR_INTERSIL, 0x3872,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Intersil Prism2.5 ISL3872 11Mb/s WLAN Controller"
+	},
+        {
+               PCIVENDOR_SAMSUNG, PCIDEVICE_SWL_2210P,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0,
+               /* Driver data, we just put the name here */
+               (unsigned long)"Samsung MagicLAN SWL-2210P 11Mb/s WLAN Controller"
+	},
+	{ /* for NetGear MA311 */
+		PCIVENDOR_NETGEAR, 0x3872,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Netgear MA311 WLAN Controller"
+	},
+	{
+		0, 0, 0, 0, 0, 0, 0
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_id_tbl);
+
+/* Function declared here because of ptr reference below */
+static int  __devinit prism2sta_probe_pci(struct pci_dev *pdev,
+				const struct pci_device_id *id);
+static void  __devexit prism2sta_remove_pci(struct pci_dev *pdev);
+
+static struct pci_driver prism2_pci_drv_id = {
+        .name = "prism2_pci",
+        .id_table = pci_id_tbl,
+        .probe = prism2sta_probe_pci,
+        .remove = prism2sta_remove_pci,
+#ifdef CONFIG_PM
+        .suspend = prism2sta_suspend_pci,
+        .resume = prism2sta_resume_pci,
+#endif
+};
+
+#ifdef MODULE
+
+static int __init prism2pci_init(void)
+{
+        WLAN_LOG_NOTICE("%s Loaded\n", version);
+	return pci_module_init(&prism2_pci_drv_id);
+};
+
+static void __exit prism2pci_cleanup(void)
+{
+	pci_unregister_driver(&prism2_pci_drv_id);
+};
+
+module_init(prism2pci_init);
+module_exit(prism2pci_cleanup);
+
+#endif
+
+int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
+{
+	int		result = 0;
+	unsigned long	timeout;
+	UINT16	reg;
+	DBFENTER;
+
+	/* Assert reset and wait awhile
+	 * (note: these delays are _really_ long, but they appear to be
+	 *        necessary.)
+	 */
+	hfa384x_setreg(hw, 0xc5, HFA384x_PCICOR);
+	timeout = jiffies + HZ/4;
+	while(time_before(jiffies, timeout)) udelay(5);
+
+	if (genesis) {
+		hfa384x_setreg(hw, genesis, HFA384x_PCIHCR);
+		timeout = jiffies + HZ/4;
+		while(time_before(jiffies, timeout)) udelay(5);
+	}
+
+	/* Clear the reset and wait some more
+	 */
+	hfa384x_setreg(hw, 0x45, HFA384x_PCICOR);
+	timeout = jiffies + HZ/2;
+	while(time_before(jiffies, timeout)) udelay(5);
+
+	/* Wait for f/w to complete initialization (CMD:BUSY == 0)
+	 */
+	timeout = jiffies + 2*HZ;
+	reg = hfa384x_getreg(hw, HFA384x_CMD);
+	while ( HFA384x_CMD_ISBUSY(reg) && time_before( jiffies, timeout) ) {
+		reg = hfa384x_getreg(hw, HFA384x_CMD);
+		udelay(10);
+	}
+	if (HFA384x_CMD_ISBUSY(reg)) {
+		WLAN_LOG_WARNING("corereset: Timed out waiting for cmd register.\n");
+		result=1;
+	}
+	DBFEXIT;
+	return result;
+}
diff --git a/drivers/staging/wlan-ng/prism2_plx.c b/drivers/staging/wlan-ng/prism2_plx.c
new file mode 100644
index 0000000..320443f
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2_plx.c
@@ -0,0 +1,472 @@
+#define WLAN_HOSTIF WLAN_PLX
+#include "hfa384x.c"
+#include "prism2mgmt.c"
+#include "prism2mib.c"
+#include "prism2sta.c"
+
+#define PLX_ATTR_SIZE	0x1000	/* Attribute memory size - 4K bytes */
+#define COR_OFFSET	0x3e0	/* COR attribute offset of Prism2 PC card */
+#define COR_VALUE	0x41	/* Enable PC card with irq in level trigger */
+#define PLX_INTCSR	0x4c	/* Interrupt Control and Status Register */
+#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */
+#define PLX_MIN_ATTR_LEN 512    /* at least 2 x 256 is needed for CIS */
+
+/* 3Com 3CRW777A (PLX) board ID */
+#define PCIVENDOR_3COM       0x10B7
+#define PCIDEVICE_AIRCONNECT 0x7770
+
+/* Eumitcom PCI WL11000 PCI Adapter (PLX) board device+vendor ID */
+#define PCIVENDOR_EUMITCOM	0x1638UL
+#define PCIDEVICE_WL11000	0x1100UL
+
+/* Global Sun Tech GL24110P PCI Adapter (PLX) board device+vendor ID */
+#define PCIVENDOR_GLOBALSUN	0x16abUL
+#define PCIDEVICE_GL24110P	0x1101UL
+#define PCIDEVICE_GL24110P_ALT	0x1102UL
+
+/* Netgear MA301 PCI Adapter (PLX) board device+vendor ID */
+#define PCIVENDOR_NETGEAR	0x1385UL
+#define PCIDEVICE_MA301		0x4100UL
+
+/* US Robotics USR2410 PCI Adapter (PLX) board device+vendor ID */
+#define	PCIVENDOR_USROBOTICS    0x16ecUL
+#define PCIDEVICE_USR2410       0x3685UL
+
+/* Linksys WPC11 card with the WDT11 adapter (PLX) board device+vendor ID */
+#define	PCIVENDOR_Linksys       0x16abUL
+#define PCIDEVICE_Wpc11Wdt11    0x1102UL
+
+/* National Datacomm Corp SOHOware Netblaster II PCI */
+#define PCIVENDOR_NDC	        0x15e8UL
+#define PCIDEVICE_NCP130_PLX 	0x0130UL
+#define PCIDEVICE_NCP130_ASIC	0x0131UL
+
+/* NDC NCP130_PLX is also sold by Corega. Their name is CGWLPCIA11 */
+#define PCIVENDOR_COREGA       PCIVENDOR_NDC
+#define PCIDEVICE_CGWLPCIA11   PCIDEVICE_NCP130_PLX
+
+/* PCI Class & Sub-Class code, Network-'Other controller' */
+#define PCI_CLASS_NETWORK_OTHERS 0x280
+
+/*----------------------------------------------------------------
+* prism2sta_probe_plx
+*
+* Probe routine called when a PCI device w/ matching ID is found.
+* This PLX implementation uses the following map:
+*   BAR0: Unused
+*   BAR1: ????
+*   BAR2: PCMCIA attribute memory
+*   BAR3: PCMCIA i/o space
+* Here's the sequence:
+*   - Allocate the PCI resources.
+*   - Read the PCMCIA attribute memory to make sure we have a WLAN card
+*   - Reset the MAC using the PCMCIA COR
+*   - Initialize the netdev and wlan data
+*   - Initialize the MAC
+*
+* Arguments:
+*	pdev		ptr to pci device structure containing info about
+*			pci configuration.
+*	id		ptr to the device id entry that matched this device.
+*
+* Returns:
+*	zero		- success
+*	negative	- failed
+*
+* Side effects:
+*
+*
+* Call context:
+*	process thread
+*
+----------------------------------------------------------------*/
+static int __devinit
+prism2sta_probe_plx(
+	struct pci_dev			*pdev,
+	const struct pci_device_id	*id)
+{
+	int		result;
+        phys_t	pccard_ioaddr;
+	phys_t  pccard_attr_mem;
+        unsigned int    pccard_attr_len;
+	void __iomem *attr_mem = NULL;
+	UINT32		plx_addr;
+        wlandevice_t    *wlandev = NULL;
+	hfa384x_t	*hw = NULL;
+	int		reg;
+        u32		regic;
+
+	if (pci_enable_device(pdev))
+		return -EIO;
+
+	/* TMC7160 boards are special */
+	if ((pdev->vendor == PCIVENDOR_NDC) &&
+	    (pdev->device == PCIDEVICE_NCP130_ASIC)) {
+		unsigned long delay;
+
+		pccard_attr_mem = 0;
+		pccard_ioaddr = pci_resource_start(pdev, 1);
+
+		outb(0x45, pccard_ioaddr);
+		delay = jiffies + 1*HZ;
+		while (time_before(jiffies, delay));
+
+		if (inb(pccard_ioaddr) != 0x45) {
+			WLAN_LOG_ERROR("Initialize the TMC7160 failed. (0x%x)\n", inb(pccard_ioaddr));
+			return -EIO;
+		}
+
+		pccard_ioaddr = pci_resource_start(pdev, 2);
+		prism2_doreset = 0;
+
+		WLAN_LOG_INFO("NDC NCP130 with TMC716(ASIC) PCI interface device found at io:0x%x, irq:%d\n", pccard_ioaddr, pdev->irq);
+		goto init;
+	}
+
+	/* Collect the resource requirements */
+	pccard_attr_mem = pci_resource_start(pdev, 2);
+	pccard_attr_len = pci_resource_len(pdev, 2);
+        if (pccard_attr_len < PLX_MIN_ATTR_LEN)
+		return -EIO;
+
+	pccard_ioaddr = pci_resource_start(pdev, 3);
+
+	/* bjoern: We need to tell the card to enable interrupts, in
+	 * case the serial eprom didn't do this already. See the
+	 * PLX9052 data book, p8-1 and 8-24 for reference.
+	 * [MSM]: This bit of code came from the orinoco_cs driver.
+	 */
+	plx_addr = pci_resource_start(pdev, 1);
+
+	regic = 0;
+	regic = inl(plx_addr+PLX_INTCSR);
+	if(regic & PLX_INTCSR_INTEN) {
+		WLAN_LOG_DEBUG(1,
+			"%s: Local Interrupt already enabled\n", dev_info);
+	} else {
+		regic |= PLX_INTCSR_INTEN;
+		outl(regic, plx_addr+PLX_INTCSR);
+		regic = inl(plx_addr+PLX_INTCSR);
+		if(!(regic & PLX_INTCSR_INTEN)) {
+			WLAN_LOG_ERROR(
+				"%s: Couldn't enable Local Interrupts\n",
+				dev_info);
+			return -EIO;
+		}
+	}
+
+	/* These assignments are here in case of future mappings for
+	 * io space and irq that might be similar to ioremap
+	 */
+        if (!request_mem_region(pccard_attr_mem, pci_resource_len(pdev, 2), "Prism2")) {
+		WLAN_LOG_ERROR("%s: Couldn't reserve PCI memory region\n", dev_info);
+		return -EIO;
+        }
+
+	attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
+
+	WLAN_LOG_INFO("A PLX PCI/PCMCIA interface device found, "
+		"phymem:0x%llx, phyio=0x%x, irq:%d, "
+		"mem: 0x%lx\n",
+		(unsigned long long)pccard_attr_mem, pccard_ioaddr, pdev->irq,
+		(unsigned long)attr_mem);
+
+	/* Verify whether PC card is present.
+	 * [MSM] This needs improvement, the right thing to do is
+	 * probably to walk the CIS looking for the vendor and product
+	 * IDs.  It would be nice if this could be tied in with the
+	 * etc/pcmcia/wlan-ng.conf file.  Any volunteers?  ;-)
+	 */
+	if (
+	readb(attr_mem + 0) != 0x01 || readb(attr_mem + 2) != 0x03 ||
+	readb(attr_mem + 4) != 0x00 || readb(attr_mem + 6) != 0x00 ||
+	readb(attr_mem + 8) != 0xFF || readb(attr_mem + 10) != 0x17 ||
+	readb(attr_mem + 12) != 0x04 || readb(attr_mem + 14) != 0x67) {
+		WLAN_LOG_ERROR("Prism2 PC card CIS is invalid.\n");
+		return -EIO;
+        }
+        WLAN_LOG_INFO("A PCMCIA WLAN adapter was found.\n");
+
+        /* Write COR to enable PC card */
+	writeb(COR_VALUE, attr_mem + COR_OFFSET);
+	reg = readb(attr_mem + COR_OFFSET);
+
+ init:
+
+	/*
+	 * Now do everything the same as a PCI device
+	 * [MSM] TODO: We could probably factor this out of pcmcia/pci/plx
+	 * and perhaps usb.  Perhaps a task for another day.......
+	 */
+
+	if ((wlandev = create_wlan()) == NULL) {
+		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+		result = -EIO;
+		goto failed;
+	}
+
+	hw = wlandev->priv;
+
+	if ( wlan_setup(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
+		result = -EIO;
+		goto failed;
+	}
+
+	/* Setup netdevice's ability to report resources
+	 * Note: the netdevice was allocated by wlan_setup()
+	 */
+        wlandev->netdev->irq = pdev->irq;
+        wlandev->netdev->base_addr = pccard_ioaddr;
+        wlandev->netdev->mem_start = (unsigned long)attr_mem;
+        wlandev->netdev->mem_end = (unsigned long)attr_mem + pci_resource_len(pdev, 0);
+
+	/* Initialize the hw data */
+        hfa384x_create(hw, wlandev->netdev->irq, pccard_ioaddr, attr_mem);
+	hw->wlandev = wlandev;
+
+	/* Register the wlandev, this gets us a name and registers the
+	 * linux netdevice.
+	 */
+	SET_MODULE_OWNER(wlandev->netdev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+       SET_NETDEV_DEV(wlandev->netdev, &(pdev->dev));
+#endif
+        if ( register_wlandev(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
+		result = -EIO;
+		goto failed;
+        }
+
+#if 0
+	/* TODO: Move this and an irq test into an hfa384x_testif() routine.
+	 */
+	outw(PRISM2STA_MAGIC, HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
+	reg=inw( HFA384x_SWSUPPORT(wlandev->netdev->base_addr));
+	if ( reg != PRISM2STA_MAGIC ) {
+		WLAN_LOG_ERROR("MAC register access test failed!\n");
+ 		result = -EIO;
+		goto failed;
+	}
+#endif
+
+	/* Do a chip-level reset on the MAC */
+	if (prism2_doreset) {
+		result = hfa384x_corereset(hw,
+				prism2_reset_holdtime,
+				prism2_reset_settletime, 0);
+		if (result != 0) {
+			unregister_wlandev(wlandev);
+			hfa384x_destroy(hw);
+			WLAN_LOG_ERROR(
+				"%s: hfa384x_corereset() failed.\n",
+				dev_info);
+			result = -EIO;
+			goto failed;
+		}
+	}
+
+	pci_set_drvdata(pdev, wlandev);
+
+	/* Shouldn't actually hook up the IRQ until we
+	 * _know_ things are alright.  A test routine would help.
+	 */
+       	request_irq(wlandev->netdev->irq, hfa384x_interrupt,
+		SA_SHIRQ, wlandev->name, wlandev);
+
+	wlandev->msdstate = WLAN_MSD_HWPRESENT;
+
+	result = 0;
+
+	goto done;
+
+ failed:
+
+	pci_set_drvdata(pdev, NULL);
+	if (wlandev)	kfree(wlandev);
+	if (hw)		kfree(hw);
+        if (attr_mem)        iounmap(attr_mem);
+	pci_release_regions(pdev);
+        pci_disable_device(pdev);
+
+ done:
+	DBFEXIT;
+        return result;
+}
+
+static void __devexit prism2sta_remove_plx(struct pci_dev *pdev)
+{
+       	wlandevice_t		*wlandev;
+	hfa384x_t               *hw;
+
+	wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
+	hw = wlandev->priv;
+
+	p80211netdev_hwremoved(wlandev);
+
+	/* reset hardware */
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+
+        if (pdev->irq)
+		free_irq(pdev->irq, wlandev);
+
+	unregister_wlandev(wlandev);
+
+	/* free local stuff */
+	if (hw) {
+		hfa384x_destroy(hw);
+		kfree(hw);
+	}
+
+	iounmap((void __iomem *)wlandev->netdev->mem_start);
+	wlan_unsetup(wlandev);
+
+	pci_release_regions(pdev);
+        pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	kfree(wlandev);
+}
+
+static struct pci_device_id plx_id_tbl[] = {
+	{
+		PCIVENDOR_EUMITCOM, PCIDEVICE_WL11000,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Eumitcom WL11000 PCI(PLX) card"
+	},
+	{
+		PCIVENDOR_GLOBALSUN, PCIDEVICE_GL24110P,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
+	},
+	{
+		PCIVENDOR_GLOBALSUN, PCIDEVICE_GL24110P_ALT,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
+	},
+	{
+		PCIVENDOR_NETGEAR, PCIDEVICE_MA301,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Global Sun Tech GL24110P PCI(PLX) card"
+	},
+	{
+		PCIVENDOR_USROBOTICS, PCIDEVICE_USR2410,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"US Robotics USR2410 PCI(PLX) card"
+	},
+	{
+		PCIVENDOR_Linksys, PCIDEVICE_Wpc11Wdt11,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"Linksys WPC11 with WDT11 PCI(PLX) adapter"
+	},
+	{
+	        PCIVENDOR_NDC, PCIDEVICE_NCP130_PLX,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"NDC Netblaster II PCI(PLX)"
+	},
+	{
+	        PCIVENDOR_NDC, PCIDEVICE_NCP130_ASIC,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"NDC Netblaster II PCI(TMC7160)"
+	},
+	{
+		PCIVENDOR_3COM, PCIDEVICE_AIRCONNECT,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		/* Driver data, we just put the name here */
+		(unsigned long)"3Com AirConnect PCI 802.11b 11Mb/s WLAN Controller"
+	},
+	{
+		0, 0, 0, 0, 0, 0, 0
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, plx_id_tbl);
+
+/* Function declared here because of ptr reference below */
+static int __devinit prism2sta_probe_plx(struct pci_dev *pdev,
+					 const struct pci_device_id *);
+static void __devexit prism2sta_remove_plx(struct pci_dev *pdev);
+
+static struct pci_driver prism2_plx_drv_id = {
+        .name = "prism2_plx",
+        .id_table = plx_id_tbl,
+        .probe = prism2sta_probe_plx,
+        .remove = prism2sta_remove_plx,
+#ifdef CONFIG_PM
+        .suspend = prism2sta_suspend_pci,
+        .resume = prism2sta_resume_pci,
+#endif
+};
+
+#ifdef MODULE
+
+static int __init prism2plx_init(void)
+{
+        WLAN_LOG_NOTICE("%s Loaded\n", version);
+	return pci_module_init(&prism2_plx_drv_id);
+};
+
+static void __exit prism2plx_cleanup(void)
+{
+	pci_unregister_driver(&prism2_plx_drv_id);
+};
+
+module_init(prism2plx_init);
+module_exit(prism2plx_cleanup);
+
+#endif // MODULE
+
+
+int hfa384x_corereset(hfa384x_t *hw, int holdtime, int settletime, int genesis)
+{
+	int		result = 0;
+
+#define COR_OFFSET	0x3e0	/* COR attribute offset of Prism2 PC card */
+#define COR_VALUE	0x41	/* Enable PC card with irq in level trigger */
+
+#define HCR_OFFSET	0x3e2	/* HCR attribute offset of Prism2 PC card */
+
+	UINT8		corsave;
+	DBFENTER;
+
+	WLAN_LOG_DEBUG(3, "Doing reset via direct COR access.\n");
+
+	/* Collect COR */
+	corsave = readb(hw->membase + COR_OFFSET);
+	/* Write reset bit (BIT7) */
+	writeb(corsave | BIT7, hw->membase + COR_OFFSET);
+	/* Hold for holdtime */
+	mdelay(holdtime);
+
+	if (genesis) {
+		writeb(genesis, hw->membase + HCR_OFFSET);
+		/* Hold for holdtime */
+		mdelay(holdtime);
+	}
+
+	/* Clear reset bit */
+	writeb(corsave & ~BIT7, hw->membase + COR_OFFSET);
+	/* Wait for settletime */
+	mdelay(settletime);
+	/* Set non-reset bits back what they were */
+	writeb(corsave, hw->membase + COR_OFFSET);
+	DBFEXIT;
+	return result;
+}
diff --git a/drivers/staging/wlan-ng/prism2_usb.c b/drivers/staging/wlan-ng/prism2_usb.c
new file mode 100644
index 0000000..e45be23
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2_usb.c
@@ -0,0 +1,361 @@
+#define WLAN_HOSTIF WLAN_USB
+#include "hfa384x_usb.c"
+#include "prism2mgmt.c"
+#include "prism2mib.c"
+#include "prism2sta.c"
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+#error "prism2_usb requires at least a 2.4.x kernel!"
+#endif
+
+#define PRISM_USB_DEVICE(vid, pid, name) \
+           USB_DEVICE(vid, pid),  \
+           .driver_info = (unsigned long) name
+
+static struct usb_device_id usb_prism_tbl[] = {
+	{PRISM_USB_DEVICE(0x04bb, 0x0922, "IOData AirPort WN-B11/USBS")},
+	{PRISM_USB_DEVICE(0x07aa, 0x0012, "Corega Wireless LAN USB Stick-11")},
+	{PRISM_USB_DEVICE(0x09aa, 0x3642, "Prism2.x 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x1668, 0x0408, "Actiontec Prism2.5 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x1668, 0x0421, "Actiontec Prism2.5 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x1915, 0x2236, "Linksys WUSB11v3.0 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x066b, 0x2212, "Linksys WUSB11v2.5 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x066b, 0x2213, "Linksys WUSB12v1.1 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x067c, 0x1022, "Siemens SpeedStream 1022 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x049f, 0x0033, "Compaq/Intel W100 PRO/Wireless 11Mbps multiport WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x0411, 0x0016, "Melco WLI-USB-S11 11Mbps WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x08de, 0x7a01, "PRISM25 IEEE 802.11 Mini USB Adapter")},
+	{PRISM_USB_DEVICE(0x8086, 0x1111, "Intel PRO/Wireless 2011B LAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x0d8e, 0x7a01, "PRISM25 IEEE 802.11 Mini USB Adapter")},
+	{PRISM_USB_DEVICE(0x045e, 0x006e, "Microsoft MN510 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x0967, 0x0204, "Acer Warplink USB Adapter")},
+	{PRISM_USB_DEVICE(0x0cde, 0x0002, "Z-Com 725/726 Prism2.5 USB/USB Integrated")},
+	{PRISM_USB_DEVICE(0x0cde, 0x0005, "Z-Com Xl735 Wireless 802.11b USB Adapter")},
+	{PRISM_USB_DEVICE(0x413c, 0x8100, "Dell TrueMobile 1180 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x0b3b, 0x1601, "ALLNET 0193 11Mbps WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x0b3b, 0x1602, "ZyXEL ZyAIR B200 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x0baf, 0x00eb, "USRobotics USR1120 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x0411, 0x0027, "Melco WLI-USB-KS11G 11Mbps WLAN Adapter")},
+        {PRISM_USB_DEVICE(0x04f1, 0x3009, "JVC MP-XP7250 Builtin USB WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x0846, 0x4110, "NetGear MA111")},
+        {PRISM_USB_DEVICE(0x03f3, 0x0020, "Adaptec AWN-8020 USB WLAN Adapter")},
+//	{PRISM_USB_DEVICE(0x0ace, 0x1201, "ZyDAS ZD1201 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x2821, 0x3300, "ASUS-WL140 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x2001, 0x3700, "DWL-122 Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x2001, 0x3702, "DWL-120 Rev F Wireless USB Adapter")},
+	{PRISM_USB_DEVICE(0x50c2, 0x4013, "Averatec USB WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x2c02, 0x14ea, "Planex GW-US11H WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x124a, 0x168b, "Airvast PRISM3 WLAN USB Adapter")},
+	{PRISM_USB_DEVICE(0x083a, 0x3503, "T-Sinus 111 USB WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x2821, 0x3300, "Hawking HighDB USB Adapter")},
+	{PRISM_USB_DEVICE(0x0411, 0x0044, "Melco WLI-USB-KB11 11Mbps WLAN Adapter")},
+	{PRISM_USB_DEVICE(0x1668, 0x6106, "ROPEX FreeLan 802.11b USB Adapter")},
+	{PRISM_USB_DEVICE(0x124a, 0x4017, "Pheenet WL-503IA 802.11b USB Adapter")},
+	{PRISM_USB_DEVICE(0x0bb2, 0x0302, "Ambit Microsystems Corp.")},
+	{PRISM_USB_DEVICE(0x9016, 0x182d, "Sitecom WL-022 802.11b USB Adapter")},
+	{PRISM_USB_DEVICE(0x0543, 0x0f01, "ViewSonic Airsync USB Adapter 11Mbps (Prism2.5)")},
+	{ /* terminator */ }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_prism_tbl);
+
+/*----------------------------------------------------------------
+* prism2sta_probe_usb
+*
+* Probe routine called by the USB subsystem.
+*
+* Arguments:
+*	dev		ptr to the usb_device struct
+*	ifnum		interface number being offered
+*
+* Returns:
+*	NULL		- we're not claiming the device+interface
+*	non-NULL	- we are claiming the device+interface and
+*			  this is a ptr to the data we want back
+*			  when disconnect is called.
+*
+* Side effects:
+*
+* Call context:
+*	I'm not sure, assume it's interrupt.
+*
+----------------------------------------------------------------*/
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+static void __devinit *prism2sta_probe_usb(
+	struct usb_device *dev,
+	unsigned int ifnum,
+	const struct usb_device_id *id)
+#else
+static int prism2sta_probe_usb(
+	struct usb_interface *interface,
+	const struct usb_device_id *id)
+#endif
+{
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	struct usb_interface *interface;
+#else
+	struct usb_device *dev;
+#endif
+
+	wlandevice_t	*wlandev = NULL;
+	hfa384x_t	*hw = NULL;
+	int              result = 0;
+
+	DBFENTER;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	interface = &dev->actconfig->interface[ifnum];
+#else
+	dev = interface_to_usbdev(interface);
+#endif
+
+
+	if ((wlandev = create_wlan()) == NULL) {
+		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+		result = -EIO;
+		goto failed;
+	}
+	hw = wlandev->priv;
+
+	if ( wlan_setup(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
+		result = -EIO;
+		goto failed;
+	}
+
+	/* Initialize the hw data */
+	hfa384x_create(hw, dev);
+	hw->wlandev = wlandev;
+
+	/* Register the wlandev, this gets us a name and registers the
+	 * linux netdevice.
+	 */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+	SET_NETDEV_DEV(wlandev->netdev, &(interface->dev));
+#endif
+        if ( register_wlandev(wlandev) != 0 ) {
+		WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
+		result = -EIO;
+		goto failed;
+        }
+
+	/* Do a chip-level reset on the MAC */
+	if (prism2_doreset) {
+		result = hfa384x_corereset(hw,
+				prism2_reset_holdtime,
+				prism2_reset_settletime, 0);
+		if (result != 0) {
+			unregister_wlandev(wlandev);
+			hfa384x_destroy(hw);
+			result = -EIO;
+			WLAN_LOG_ERROR(
+				"%s: hfa384x_corereset() failed.\n",
+				dev_info);
+			goto failed;
+		}
+	}
+
+#ifndef NEW_MODULE_CODE
+	usb_inc_dev_use(dev);
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15))
+	usb_get_dev(dev);
+#endif
+
+	wlandev->msdstate = WLAN_MSD_HWPRESENT;
+
+	goto done;
+
+ failed:
+	if (wlandev)	kfree(wlandev);
+	if (hw)		kfree(hw);
+	wlandev = NULL;
+
+ done:
+	DBFEXIT;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+	return wlandev;
+#else
+	usb_set_intfdata(interface, wlandev);
+	return result;
+#endif
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_disconnect_usb
+*
+* Called when a device previously claimed by probe is removed
+* from the USB.
+*
+* Arguments:
+*	dev		ptr to the usb_device struct
+*	ptr		ptr returned by probe() when the device
+*                       was claimed.
+*
+* Returns:
+*	Nothing
+*
+* Side effects:
+*
+* Call context:
+*	process
+----------------------------------------------------------------*/
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+static void __devexit
+prism2sta_disconnect_usb(struct usb_device *dev, void *ptr)
+#else
+static void
+prism2sta_disconnect_usb(struct usb_interface *interface)
+#endif
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	wlandevice_t		*wlandev;
+#else
+	wlandevice_t		*wlandev = (wlandevice_t*)ptr;
+#endif
+
+        DBFENTER;
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	wlandev = (wlandevice_t *) usb_get_intfdata(interface);
+#endif
+
+	if ( wlandev != NULL ) {
+		LIST_HEAD(cleanlist);
+		struct list_head	*entry;
+		struct list_head	*temp;
+		unsigned long		flags;
+
+		hfa384x_t		*hw = wlandev->priv;
+
+		if (!hw)
+			goto exit;
+
+		spin_lock_irqsave(&hw->ctlxq.lock, flags);
+
+		p80211netdev_hwremoved(wlandev);
+		list_splice_init(&hw->ctlxq.reapable, &cleanlist);
+		list_splice_init(&hw->ctlxq.completing, &cleanlist);
+		list_splice_init(&hw->ctlxq.pending, &cleanlist);
+		list_splice_init(&hw->ctlxq.active, &cleanlist);
+
+		spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
+
+		/* There's no hardware to shutdown, but the driver
+		 * might have some tasks or tasklets that must be
+		 * stopped before we can tear everything down.
+		 */
+		prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+
+		del_singleshot_timer_sync(&hw->throttle);
+		del_singleshot_timer_sync(&hw->reqtimer);
+		del_singleshot_timer_sync(&hw->resptimer);
+
+		/* Unlink all the URBs. This "removes the wheels"
+		 * from the entire CTLX handling mechanism.
+		 */
+		usb_kill_urb(&hw->rx_urb);
+		usb_kill_urb(&hw->tx_urb);
+		usb_kill_urb(&hw->ctlx_urb);
+
+		tasklet_kill(&hw->completion_bh);
+		tasklet_kill(&hw->reaper_bh);
+
+		flush_scheduled_work();
+
+		/* Now we complete any outstanding commands
+		 * and tell everyone who is waiting for their
+		 * responses that we have shut down.
+		 */
+		list_for_each(entry, &cleanlist) {
+			hfa384x_usbctlx_t	*ctlx;
+
+			ctlx = list_entry(entry, hfa384x_usbctlx_t, list);
+			complete(&ctlx->done);
+		}
+
+		/* Give any outstanding synchronous commands
+		 * a chance to complete. All they need to do
+		 * is "wake up", so that's easy.
+		 * (I'd like a better way to do this, really.)
+		 */
+		msleep(100);
+
+		/* Now delete the CTLXs, because no-one else can now. */
+		list_for_each_safe(entry, temp, &cleanlist) {
+			hfa384x_usbctlx_t *ctlx;
+
+			ctlx = list_entry(entry, hfa384x_usbctlx_t, list);
+			kfree(ctlx);
+		}
+
+		/* Unhook the wlandev */
+		unregister_wlandev(wlandev);
+		wlan_unsetup(wlandev);
+
+#ifndef NEW_MODULE_CODE
+		usb_dec_dev_use(hw->usb);
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15))
+		usb_put_dev(hw->usb);
+#endif
+
+		hfa384x_destroy(hw);
+		kfree(hw);
+
+		kfree(wlandev);
+	}
+
+ exit:
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
+	usb_set_intfdata(interface, NULL);
+#endif
+	DBFEXIT;
+}
+
+
+static struct usb_driver prism2_usb_driver = {
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,19)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
+	.owner = THIS_MODULE,
+#endif
+	.name = "prism2_usb",
+	.probe = prism2sta_probe_usb,
+	.disconnect = prism2sta_disconnect_usb,
+	.id_table = usb_prism_tbl,
+	/* fops, minor? */
+};
+
+#ifdef MODULE
+
+static int __init prism2usb_init(void)
+{
+        DBFENTER;
+
+        WLAN_LOG_NOTICE("%s Loaded\n", version);
+        WLAN_LOG_NOTICE("dev_info is: %s\n", dev_info);
+
+	/* This call will result in calls to prism2sta_probe_usb. */
+	return usb_register(&prism2_usb_driver);
+
+	DBFEXIT;
+};
+
+static void __exit prism2usb_cleanup(void)
+{
+        DBFENTER;
+
+	usb_deregister(&prism2_usb_driver);
+
+        printk(KERN_NOTICE "%s Unloaded\n", version);
+
+	DBFEXIT;
+};
+
+module_init(prism2usb_init);
+module_exit(prism2usb_cleanup);
+
+#endif // module
diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
new file mode 100644
index 0000000..c975025
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -0,0 +1,2956 @@
+/* src/prism2/driver/prism2mgmt.c
+*
+* Management request handler functions.
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* The functions in this file handle management requests sent from
+* user mode.
+*
+* Most of these functions have two separate blocks of code that are
+* conditional on whether this is a station or an AP.  This is used
+* to separate out the STA and AP responses to these management primitives.
+* It's a choice (good, bad, indifferent?) to have the code in the same
+* place so it's clear that the same primitive is implemented in both
+* cases but has different behavior.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+#define WLAN_DBVAR	prism2_debug
+
+#include "version.h"
+
+
+#include <linux/version.h>
+
+#include <linux/if_arp.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/random.h>
+
+#if (WLAN_HOSTIF == WLAN_USB)
+#include <linux/usb.h>
+#endif
+
+#if (WLAN_HOSTIF == WLAN_PCMCIA)
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+#endif
+
+#include "wlan_compat.h"
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "hfa384x.h"
+#include "prism2mgmt.h"
+
+/*================================================================*/
+/* Local Constants */
+
+
+/*================================================================*/
+/* Local Macros */
+
+/* Converts 802.11 format rate specifications to prism2 */
+#define p80211rate_to_p2bit(n)	((((n)&~BIT7) == 2) ? BIT0 : \
+				 (((n)&~BIT7) == 4) ? BIT1 : \
+				 (((n)&~BIT7) == 11) ? BIT2 : \
+				 (((n)&~BIT7) == 22) ? BIT3 : 0)
+
+/*================================================================*/
+/* Local Types */
+
+
+/*================================================================*/
+/* Local Static Definitions */
+
+
+/*================================================================*/
+/* Local Function Declarations */
+
+
+/*================================================================*/
+/* Function Definitions */
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_powermgmt
+*
+* Set the power management state of this station's MAC.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_powermgmt(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_powermgmt_t	*msg = msgp;
+
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/*
+		 * Set CNFPMENABLED (on or off)
+		 * Set CNFMULTICASTRX (if PM on, otherwise clear)
+		 * Spout a notice stating that SleepDuration and
+		 * HoldoverDuration and PMEPS also have an impact.
+		 */
+		/* Powermgmt is currently unsupported for STA */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	} else {
+
+		/*** ACCESS POINT ***/
+
+		/* Powermgmt is never supported for AP */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_scan
+*
+* Initiate a scan for BSSs.
+*
+* This function corresponds to MLME-scan.request and part of
+* MLME-scan.confirm.  As far as I can tell in the standard, there
+* are no restrictions on when a scan.request may be issued.  We have
+* to handle in whatever state the driver/MAC happen to be.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_scan_t	*msg = msgp;
+        UINT16                  roamingmode, word;
+	int                     i, timeout;
+	int                     istmpenable = 0;
+
+        hfa384x_HostScanRequest_data_t  scanreq;
+
+	DBFENTER;
+
+        if (hw->ap) {
+                WLAN_LOG_ERROR("Prism2 in AP mode cannot perform scans.\n");
+                result = 1;
+                msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+                goto exit;
+        }
+
+        /* gatekeeper check */
+        if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+                                     hw->ident_sta_fw.minor,
+                                     hw->ident_sta_fw.variant) <
+            HFA384x_FIRMWARE_VERSION(1,3,2)) {
+		WLAN_LOG_ERROR("HostScan not supported with current firmware (<1.3.2).\n");
+                result = 1;
+                msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto exit;
+	}
+
+        memset(&scanreq, 0, sizeof(scanreq));
+
+        /* save current roaming mode */
+        result = hfa384x_drvr_getconfig16(hw,
+                        HFA384x_RID_CNFROAMINGMODE, &roamingmode);
+        if ( result ) {
+                WLAN_LOG_ERROR("getconfig(ROAMMODE) failed. result=%d\n",
+                                result);
+                msg->resultcode.data =
+                        P80211ENUM_resultcode_implementation_failure;
+                goto exit;
+        }
+
+        /* drop into mode 3 for the scan */
+        result = hfa384x_drvr_setconfig16(hw,
+                        HFA384x_RID_CNFROAMINGMODE,
+			HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+        if ( result ) {
+                WLAN_LOG_ERROR("setconfig(ROAMINGMODE) failed. result=%d\n",
+                                result);
+                msg->resultcode.data =
+                        P80211ENUM_resultcode_implementation_failure;
+                goto exit;
+        }
+
+        /* active or passive? */
+        if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+                                     hw->ident_sta_fw.minor,
+                                     hw->ident_sta_fw.variant) >
+            HFA384x_FIRMWARE_VERSION(1,5,0)) {
+                if (msg->scantype.data != P80211ENUM_scantype_active) {
+                        word = host2hfa384x_16(msg->maxchanneltime.data);
+                } else {
+                        word = 0;
+                }
+                result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL, word);
+                if ( result ) {
+                        WLAN_LOG_WARNING("Passive scan not supported with "
+					  "current firmware.  (<1.5.1)\n");
+                }
+        }
+
+	/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
+	word = HFA384x_RATEBIT_2;
+	scanreq.txRate = host2hfa384x_16(word);
+
+        /* set up the channel list */
+        word = 0;
+        for (i = 0; i < msg->channellist.data.len; i++) {
+                UINT8 channel = msg->channellist.data.data[i];
+                if (channel > 14) continue;
+                /* channel 1 is BIT0 ... channel 14 is BIT13 */
+                word |= (1 << (channel-1));
+        }
+        scanreq.channelList = host2hfa384x_16(word);
+
+        /* set up the ssid, if present. */
+        scanreq.ssid.len = host2hfa384x_16(msg->ssid.data.len);
+        memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
+
+	/* Enable the MAC port if it's not already enabled  */
+	result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
+	if ( result ) {
+		WLAN_LOG_ERROR("getconfig(PORTSTATUS) failed. "
+				"result=%d\n", result);
+		msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+	if (word == HFA384x_PORTSTATUS_DISABLED) {
+		UINT16 wordbuf[17];
+
+		result = hfa384x_drvr_setconfig16(hw,
+			HFA384x_RID_CNFROAMINGMODE,
+			HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+		if ( result ) {
+			WLAN_LOG_ERROR("setconfig(ROAMINGMODE) failed. result=%d\n", result);
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		/* Construct a bogus SSID and assign it to OwnSSID and
+		 * DesiredSSID
+		 */
+		wordbuf[0] = host2hfa384x_16(WLAN_SSID_MAXLEN);
+		get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
+		result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
+				wordbuf, HFA384x_RID_CNFOWNSSID_LEN);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set OwnSSID.\n");
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
+				wordbuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set DesiredSSID.\n");
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		/* bsstype */
+		result = hfa384x_drvr_setconfig16(hw,
+				HFA384x_RID_CNFPORTTYPE,
+				HFA384x_PORTTYPE_IBSS);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set CNFPORTTYPE.\n");
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		/* ibss options */
+		result = hfa384x_drvr_setconfig16(hw,
+				HFA384x_RID_CREATEIBSS,
+				HFA384x_CREATEIBSS_JOINCREATEIBSS);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set CREATEIBSS.\n");
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		result = hfa384x_drvr_enable(hw, 0);
+		if ( result ) {
+			WLAN_LOG_ERROR("drvr_enable(0) failed. "
+					"result=%d\n", result);
+			msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		istmpenable = 1;
+	}
+
+        /* Figure out our timeout first Kus, then HZ */
+        timeout = msg->channellist.data.len * msg->maxchanneltime.data;
+	timeout = (timeout * HZ)/1000;
+
+        /* Issue the scan request */
+        hw->scanflag = 0;
+
+	WLAN_HEX_DUMP(5,"hscanreq", &scanreq, sizeof(scanreq));
+
+        result = hfa384x_drvr_setconfig( hw,
+                        HFA384x_RID_HOSTSCAN, &scanreq,
+                        sizeof(hfa384x_HostScanRequest_data_t));
+        if ( result ) {
+                WLAN_LOG_ERROR("setconfig(SCANREQUEST) failed. result=%d\n",
+                                result);
+                msg->resultcode.data =
+                        P80211ENUM_resultcode_implementation_failure;
+                goto exit;
+        }
+
+        /* sleep until info frame arrives */
+        wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
+
+	msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
+	if (hw->scanflag == -1)
+		hw->scanflag = 0;
+
+	msg->numbss.data = hw->scanflag;
+
+        hw->scanflag = 0;
+
+	/* Disable port if we temporarily enabled it. */
+	if (istmpenable) {
+		result = hfa384x_drvr_disable(hw, 0);
+		if ( result ) {
+			WLAN_LOG_ERROR("drvr_disable(0) failed. "
+					"result=%d\n", result);
+			msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+	}
+
+	/* restore original roaming mode */
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
+					  roamingmode);
+        if ( result ) {
+                WLAN_LOG_ERROR("setconfig(ROAMMODE) failed. result=%d\n",
+                                result);
+                msg->resultcode.data =
+                        P80211ENUM_resultcode_implementation_failure;
+                goto exit;
+        }
+
+        result = 0;
+        msg->resultcode.data = P80211ENUM_resultcode_success;
+
+ exit:
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_scan_results
+*
+* Retrieve the BSS description for one of the BSSs identified in
+* a scan.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+        p80211msg_dot11req_scan_results_t       *req;
+	hfa384x_t		*hw = wlandev->priv;
+	hfa384x_HScanResultSub_t *item = NULL;
+
+	int count;
+
+	DBFENTER;
+
+        req = (p80211msg_dot11req_scan_results_t *) msgp;
+
+	req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	if (hw->ap) {
+		result = 1;
+		req->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto exit;
+	}
+
+	if (! hw->scanresults) {
+		WLAN_LOG_ERROR("dot11req_scan_results can only be used after a successful dot11req_scan.\n");
+		result = 2;
+		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		goto exit;
+	}
+
+        count = (hw->scanresults->framelen - 3) / 32;
+	if (count > 32)  count = 32;
+
+	if (req->bssindex.data >= count) {
+		WLAN_LOG_DEBUG(0, "requested index (%d) out of range (%d)\n",
+				req->bssindex.data, count);
+		result = 2;
+		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		goto exit;
+	}
+
+	item = &(hw->scanresults->info.hscanresult.result[req->bssindex.data]);
+	/* signal and noise */
+	req->signal.status = P80211ENUM_msgitem_status_data_ok;
+	req->noise.status = P80211ENUM_msgitem_status_data_ok;
+	req->signal.data = hfa384x2host_16(item->sl);
+	req->noise.data = hfa384x2host_16(item->anl);
+
+	/* BSSID */
+	req->bssid.status = P80211ENUM_msgitem_status_data_ok;
+	req->bssid.data.len = WLAN_BSSID_LEN;
+	memcpy(req->bssid.data.data, item->bssid, WLAN_BSSID_LEN);
+
+	/* SSID */
+	req->ssid.status = P80211ENUM_msgitem_status_data_ok;
+	req->ssid.data.len = hfa384x2host_16(item->ssid.len);
+	memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
+
+	/* supported rates */
+        for (count = 0; count < 10 ; count++)
+                if (item->supprates[count] == 0)
+                        break;
+
+#define REQBASICRATE(N) \
+	if ((count >= N) && DOT11_RATE5_ISBASIC_GET(item->supprates[(N)-1])) { \
+		req->basicrate ## N .data = item->supprates[(N)-1]; \
+		req->basicrate ## N .status = P80211ENUM_msgitem_status_data_ok; \
+	}
+
+	REQBASICRATE(1);
+	REQBASICRATE(2);
+	REQBASICRATE(3);
+	REQBASICRATE(4);
+	REQBASICRATE(5);
+	REQBASICRATE(6);
+	REQBASICRATE(7);
+	REQBASICRATE(8);
+
+#define REQSUPPRATE(N) \
+	if (count >= N) { \
+		req->supprate ## N .data = item->supprates[(N)-1]; \
+		req->supprate ## N .status = P80211ENUM_msgitem_status_data_ok; \
+	}
+
+	REQSUPPRATE(1);
+	REQSUPPRATE(2);
+	REQSUPPRATE(3);
+	REQSUPPRATE(4);
+	REQSUPPRATE(5);
+	REQSUPPRATE(6);
+	REQSUPPRATE(7);
+	REQSUPPRATE(8);
+
+	/* beacon period */
+	req->beaconperiod.status = P80211ENUM_msgitem_status_data_ok;
+	req->beaconperiod.data = hfa384x2host_16(item->bcnint);
+
+	/* timestamps */
+	req->timestamp.status = P80211ENUM_msgitem_status_data_ok;
+	req->timestamp.data = jiffies;
+	req->localtime.status = P80211ENUM_msgitem_status_data_ok;
+	req->localtime.data = jiffies;
+
+	/* atim window */
+	req->ibssatimwindow.status = P80211ENUM_msgitem_status_data_ok;
+	req->ibssatimwindow.data = hfa384x2host_16(item->atim);
+
+	/* Channel */
+	req->dschannel.status = P80211ENUM_msgitem_status_data_ok;
+	req->dschannel.data = hfa384x2host_16(item->chid);
+
+	/* capinfo bits */
+	count = hfa384x2host_16(item->capinfo);
+
+	/* privacy flag */
+	req->privacy.status = P80211ENUM_msgitem_status_data_ok;
+	req->privacy.data = WLAN_GET_MGMT_CAP_INFO_PRIVACY(count);
+
+	/* cfpollable */
+	req->cfpollable.status = P80211ENUM_msgitem_status_data_ok;
+	req->cfpollable.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLABLE(count);
+
+	/* cfpollreq */
+	req->cfpollreq.status = P80211ENUM_msgitem_status_data_ok;
+	req->cfpollreq.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(count);
+
+	/* bsstype */
+	req->bsstype.status =  P80211ENUM_msgitem_status_data_ok;
+	req->bsstype.data = (WLAN_GET_MGMT_CAP_INFO_ESS(count)) ?
+		P80211ENUM_bsstype_infrastructure :
+		P80211ENUM_bsstype_independent;
+
+	// item->proberesp_rate
+/*
+	req->fhdwelltime
+	req->fhhopset
+	req->fhhoppattern
+	req->fhhopindex
+        req->cfpdurremaining
+*/
+
+	result = 0;
+	req->resultcode.data = P80211ENUM_resultcode_success;
+
+ exit:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_join
+*
+* Join a BSS whose BSS description was previously obtained with
+* a scan.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_join(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_join_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* TODO: Implement after scan */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	} else {
+
+		/*** ACCESS POINT ***/
+
+		/* Never supported by APs */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_p2_join
+*
+* Join a specific BSS
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_p2_join(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_join_t	*msg = msgp;
+	UINT16			reg;
+	p80211pstrd_t		*pstr;
+	UINT8			bytebuf[256];
+	hfa384x_bytestr_t	*p2bytestr = (hfa384x_bytestr_t*)bytebuf;
+        hfa384x_JoinRequest_data_t	joinreq;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		wlandev->macmode = WLAN_MACMODE_NONE;
+
+		/*** STATION ***/
+		/* Set the PortType */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+
+		/* ess port */
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set Port Type\n");
+			goto failed;
+		}
+
+		/* Set the auth type */
+		if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
+			reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
+		} else {
+			reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
+		}
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set Authentication\n");
+			goto failed;
+		}
+
+		/* Turn off all roaming */
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE, 3);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to Turn off Roaming\n");
+			goto failed;
+		}
+
+		/* Basic rates */
+                reg = 0;
+		if ( msg->basicrate1.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg = p80211rate_to_p2bit(msg->basicrate1.data);
+		}
+		if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate2.data);
+		}
+		if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate3.data);
+		}
+		if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate4.data);
+		}
+		if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate5.data);
+		}
+		if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate6.data);
+		}
+		if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate7.data);
+		}
+		if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->basicrate8.data);
+		}
+		if( reg == 0)
+			 reg = 0x03;
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, reg);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", reg);
+			goto failed;
+		}
+
+		/* Operational rates (supprates and txratecontrol) */
+		reg = 0;
+		if ( msg->operationalrate1.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg = p80211rate_to_p2bit(msg->operationalrate1.data);
+		}
+		if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate2.data);
+		}
+		if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate3.data);
+		}
+		if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate4.data);
+		}
+		if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate5.data);
+		}
+		if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate6.data);
+		}
+		if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate7.data);
+		}
+		if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+			reg |= p80211rate_to_p2bit(msg->operationalrate8.data);
+		}
+		if( reg == 0)
+			 reg = 0x0f;
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, reg);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set supprates=%d.\n", reg);
+			goto failed;
+		}
+
+ 		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set txrates=%d.\n", reg);
+			goto failed;
+		}
+
+		/* Set the ssid */
+		memset(bytebuf, 0, 256);
+		pstr = (p80211pstrd_t*)&(msg->ssid.data);
+		prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+		result = hfa384x_drvr_setconfig(
+			hw, HFA384x_RID_CNFDESIREDSSID,
+			bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set SSID\n");
+			goto failed;
+		}
+
+		/* Enable the Port */
+		result = hfa384x_cmd_enable(hw, 0);
+		if ( result ) {
+			WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+			goto failed;
+		}
+
+		/* Fill in the join request */
+		joinreq.channel = msg->channel.data;
+		memcpy( joinreq.bssid, ((unsigned char *) &msg->bssid.data) + 1, WLAN_BSSID_LEN);
+		hw->joinreq = joinreq;
+		hw->join_ap = 1;
+
+		/* Send the join request */
+		result = hfa384x_drvr_setconfig( hw,
+			HFA384x_RID_JOINREQUEST,
+			&joinreq, HFA384x_RID_JOINREQUEST_LEN);
+                if(result != 0) {
+			WLAN_LOG_ERROR("Join request failed, result=%d.\n", result);
+			goto failed;
+		}
+
+	} else {
+
+		/*** ACCESS POINT ***/
+
+		/* Never supported by APs */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	}
+
+        goto done;
+failed:
+	WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
+	msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+
+done:
+        result = 0;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_authenticate
+*
+* Station should be begin an authentication exchange.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_authenticate(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_authenticate_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* TODO: Decide how we're going to handle this one w/ Prism2 */
+		/*       It could be entertaining since Prism2 doesn't have  */
+		/*       an explicit way to control this */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	} else {
+
+		/*** ACCESS POINT ***/
+
+		/* Never supported by APs */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_deauthenticate
+*
+* Send a deauthenticate notification.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_deauthenticate(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_deauthenticate_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* TODO: Decide how we're going to handle this one w/ Prism2 */
+		/*       It could be entertaining since Prism2 doesn't have  */
+		/*       an explicit way to control this */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	} else {
+
+		/*** ACCESS POINT ***/
+		hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_associate
+*
+* Associate with an ESS.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	int 			result = 0;
+	p80211msg_dot11req_associate_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+#if 0
+		/* Set the TxRates */
+		reg = 0x000f;
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
+#endif
+
+		/* Set the PortType */
+		/* ess port */
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
+
+		/* Enable the Port */
+		hfa384x_drvr_enable(hw, 0);
+
+		/* Set the resultcode */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	} else {
+
+		/*** ACCESS POINT ***/
+
+		/* Never supported on AP */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_reassociate
+*
+* Renew association because of a BSS change.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_reassociate_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* TODO: Not supported yet...not sure how we're going to do it */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	} else {
+
+		/*** ACCESS POINT ***/
+
+		/* Never supported on AP */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_disassociate
+*
+* Send a disassociation notification.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_disassociate(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_disassociate_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* TODO: Not supported yet...not sure how to do it */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	} else {
+
+		/*** ACCESS POINT ***/
+		hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_reset
+*
+* Reset the MAC and MSD.  The p80211 layer has it's own handling
+* that should be done before and after this function.
+* Procedure:
+*   - disable system interrupts ??
+*   - disable MAC interrupts
+*   - restore system interrupts
+*   - issue the MAC initialize command
+*   - clear any MSD level state (including timers, queued events,
+*     etc.).  Note that if we're removing timer'd/queue events, we may
+*     need to have remained in the system interrupt disabled state.
+*     We should be left in the same state that we're in following
+*     driver initialization.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer, MAY BE NULL! for a driver local
+*			call.
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread, commonly wlanctl, but might be rmmod/pci_close.
+----------------------------------------------------------------*/
+int prism2mgmt_reset(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_reset_t	*msg = msgp;
+	DBFENTER;
+
+	/*
+	 * This is supported on both AP and STA and it's not allowed
+	 * to fail.
+	 */
+	if ( msgp ) {
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		WLAN_LOG_INFO("dot11req_reset: the macaddress and "
+			"setdefaultmib arguments are currently unsupported.\n");
+	}
+
+	/*
+	 * If we got this far, the MSD must be in the MSDRUNNING state
+	 * therefore, we must stop and then restart the hw/MAC combo.
+	 */
+	hfa384x_drvr_stop(hw);
+	result = hfa384x_drvr_start(hw);
+	if (result != 0) {
+		WLAN_LOG_ERROR("dot11req_reset: Initialize command failed,"
+				" bad things will happen from here.\n");
+		return 0;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_start
+*
+* Start a BSS.  Any station can do this for IBSS, only AP for ESS.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_dot11req_start_t	*msg = msgp;
+
+	p80211pstrd_t		*pstr;
+	UINT8			bytebuf[80];
+	hfa384x_bytestr_t	*p2bytestr = (hfa384x_bytestr_t*)bytebuf;
+	hfa384x_PCFInfo_data_t	*pcfinfo = (hfa384x_PCFInfo_data_t*)bytebuf;
+	UINT16			word;
+	DBFENTER;
+
+	wlandev->macmode = WLAN_MACMODE_NONE;
+
+	/* Set the SSID */
+	memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
+
+	if (!hw->ap) {
+		/*** ADHOC IBSS ***/
+		/* see if current f/w is less than 8c3 */
+		if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+					     hw->ident_sta_fw.minor,
+					     hw->ident_sta_fw.variant) <
+		    HFA384x_FIRMWARE_VERSION(0,8,3)) {
+			/* Ad-Hoc not quite supported on Prism2 */
+			msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+			msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+			goto done;
+		}
+
+  		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+		/*** STATION ***/
+		/* Set the REQUIRED config items */
+		/* SSID */
+		pstr = (p80211pstrd_t*)&(msg->ssid.data);
+		prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+		result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
+				bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
+			goto failed;
+		}
+		result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
+				bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
+			goto failed;
+		}
+
+		/* bsstype - we use the default in the ap firmware */
+		/* IBSS port */
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
+
+		/* beacon period */
+		word = msg->beaconperiod.data;
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
+			goto failed;
+		}
+
+		/* dschannel */
+		word = msg->dschannel.data;
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
+			goto failed;
+		}
+		/* Basic rates */
+		word = p80211rate_to_p2bit(msg->basicrate1.data);
+		if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate2.data);
+		}
+		if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate3.data);
+		}
+		if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate4.data);
+		}
+		if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate5.data);
+		}
+		if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate6.data);
+		}
+		if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate7.data);
+		}
+		if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->basicrate8.data);
+		}
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
+			goto failed;
+		}
+
+		/* Operational rates (supprates and txratecontrol) */
+		word = p80211rate_to_p2bit(msg->operationalrate1.data);
+		if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate2.data);
+		}
+		if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate3.data);
+		}
+		if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate4.data);
+		}
+		if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate5.data);
+		}
+		if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate6.data);
+		}
+		if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate7.data);
+		}
+		if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+			word |= p80211rate_to_p2bit(msg->operationalrate8.data);
+		}
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
+			goto failed;
+		}
+
+ 		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
+		if ( result ) {
+			WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
+			goto failed;
+		}
+
+		/* Set the macmode so the frame setup code knows what to do */
+		if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
+			wlandev->macmode = WLAN_MACMODE_IBSS_STA;
+			/* lets extend the data length a bit */
+			hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
+		}
+
+		/* Enable the Port */
+		result = hfa384x_drvr_enable(hw, 0);
+		if ( result ) {
+			WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+			goto failed;
+		}
+
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+
+		goto done;
+	}
+
+	/*** ACCESS POINT ***/
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	/* Validate the command, if BSStype=infra is the tertiary loaded? */
+	if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
+		WLAN_LOG_ERROR("AP driver cannot create IBSS.\n");
+		goto failed;
+	} else if ( hw->cap_sup_sta.id != 5) {
+		WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
+		goto failed;
+	}
+
+	/* Set the REQUIRED config items */
+	/* SSID */
+	pstr = (p80211pstrd_t*)&(msg->ssid.data);
+	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+	result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
+				bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set SSID, result=0x%04x\n", result);
+		goto failed;
+	}
+
+	/* bsstype - we use the default in the ap firmware */
+
+	/* beacon period */
+	word = msg->beaconperiod.data;
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
+		goto failed;
+	}
+
+	/* dschannel */
+	word = msg->dschannel.data;
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
+		goto failed;
+	}
+	/* Basic rates */
+	word = p80211rate_to_p2bit(msg->basicrate1.data);
+	if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate2.data);
+	}
+	if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate3.data);
+	}
+	if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate4.data);
+	}
+	if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate5.data);
+	}
+	if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate6.data);
+	}
+	if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate7.data);
+	}
+	if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->basicrate8.data);
+	}
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
+		goto failed;
+	}
+
+	/* Operational rates (supprates and txratecontrol) */
+	word = p80211rate_to_p2bit(msg->operationalrate1.data);
+	if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate2.data);
+	}
+	if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate3.data);
+	}
+	if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate4.data);
+	}
+	if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate5.data);
+	}
+	if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate6.data);
+	}
+	if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate7.data);
+	}
+	if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+		word |= p80211rate_to_p2bit(msg->operationalrate8.data);
+	}
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
+		goto failed;
+	}
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL0, word);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
+		goto failed;
+	}
+
+	/* ibssatimwindow */
+	if (msg->ibssatimwindow.status == P80211ENUM_msgitem_status_data_ok) {
+		WLAN_LOG_INFO("prism2mgmt_start: atimwindow not used in "
+			       "Infrastructure mode, ignored.\n");
+	}
+
+	/* DTIM period */
+	word = msg->dtimperiod.data;
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNDTIMPER, word);
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to set dtim period=%d.\n", word);
+		goto failed;
+	}
+
+	/* probedelay */
+	if (msg->probedelay.status == P80211ENUM_msgitem_status_data_ok) {
+		WLAN_LOG_INFO("prism2mgmt_start: probedelay not "
+			       "supported in prism2, ignored.\n");
+	}
+
+	/* cfpollable, cfpollreq, cfpperiod, cfpmaxduration */
+	if (msg->cfpollable.data == P80211ENUM_truth_true &&
+	    msg->cfpollreq.data == P80211ENUM_truth_true ) {
+		WLAN_LOG_ERROR("cfpollable=cfpollreq=true is illegal.\n");
+		result = -1;
+		goto failed;
+	}
+
+	/* read the PCFInfo and update */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFAPPCFINFO,
+					pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
+	if ( result ) {
+		WLAN_LOG_INFO("prism2mgmt_start: read(pcfinfo) failed, "
+				"assume it's "
+				"not supported, pcf settings ignored.\n");
+		goto pcf_skip;
+	}
+	if ((msg->cfpollable.data == P80211ENUM_truth_false &&
+	     msg->cfpollreq.data == P80211ENUM_truth_false) ) {
+	    	pcfinfo->MediumOccupancyLimit = 0;
+		pcfinfo->CFPPeriod = 0;
+		pcfinfo->CFPMaxDuration = 0;
+		pcfinfo->CFPFlags &= host2hfa384x_16((UINT16)~BIT0);
+
+		if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok ||
+		     msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok ) {
+			WLAN_LOG_WARNING(
+				"Setting cfpperiod or cfpmaxduration when "
+				"cfpollable and cfreq are false is pointless.\n");
+		}
+	}
+	if ((msg->cfpollable.data == P80211ENUM_truth_true ||
+	     msg->cfpollreq.data == P80211ENUM_truth_true) ) {
+		if ( msg->cfpollable.data == P80211ENUM_truth_true) {
+			pcfinfo->CFPFlags |= host2hfa384x_16((UINT16)BIT0);
+		}
+
+		if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok) {
+			pcfinfo->CFPPeriod = msg->cfpperiod.data;
+			pcfinfo->CFPPeriod = host2hfa384x_16(pcfinfo->CFPPeriod);
+		}
+
+		if ( msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok) {
+			pcfinfo->CFPMaxDuration = msg->cfpmaxduration.data;
+			pcfinfo->CFPMaxDuration = host2hfa384x_16(pcfinfo->CFPMaxDuration);
+			pcfinfo->MediumOccupancyLimit = pcfinfo->CFPMaxDuration;
+		}
+	}
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFAPPCFINFO,
+					pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
+	if ( result ) {
+		WLAN_LOG_ERROR("write(pcfinfo) failed.\n");
+		goto failed;
+	}
+
+pcf_skip:
+	/* Set the macmode so the frame setup code knows what to do */
+	if ( msg->bsstype.data == P80211ENUM_bsstype_infrastructure ) {
+		wlandev->macmode = WLAN_MACMODE_ESS_AP;
+		/* lets extend the data length a bit */
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
+	}
+
+	/* Set the BSSID to the same as our MAC */
+	memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
+
+	/* Enable the Port */
+	result = hfa384x_drvr_enable(hw, 0);
+	if ( result ) {
+		WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+		goto failed;
+	}
+
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	goto done;
+failed:
+	WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
+	msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+
+done:
+	result = 0;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_enable
+*
+* Start a BSS.  Any station can do this for IBSS, only AP for ESS.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_enable(wlandevice_t *wlandev, void *msgp)
+{
+	int			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_enable_t	*msg = msgp;
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* Ad-Hoc not quite supported on Prism2 */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto done;
+	}
+
+	/*** ACCESS POINT ***/
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	/* Is the tertiary loaded? */
+	if ( hw->cap_sup_sta.id != 5) {
+		WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
+		goto failed;
+	}
+
+	/* Set the macmode so the frame setup code knows what to do */
+	wlandev->macmode = WLAN_MACMODE_ESS_AP;
+
+	/* Set the BSSID to the same as our MAC */
+	memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
+
+	/* Enable the Port */
+	result = hfa384x_drvr_enable(hw, 0);
+	if ( result ) {
+		WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+		goto failed;
+	}
+
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	goto done;
+failed:
+	msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+
+done:
+	result = 0;
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_readpda
+*
+* Collect the PDA data and put it in the message.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_readpda_t	*msg = msgp;
+	int				result;
+	DBFENTER;
+
+	/* We only support collecting the PDA when in the FWLOAD
+	 * state.
+	 */
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		WLAN_LOG_ERROR(
+			"PDA may only be read "
+			"in the fwload state.\n");
+		msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	} else {
+		/*  Call drvr_readpda(), it handles the auxport enable
+		 *  and validating the returned PDA.
+		 */
+		result = hfa384x_drvr_readpda(
+			hw,
+			msg->pda.data,
+			HFA384x_PDA_LEN_MAX);
+		if (result) {
+			WLAN_LOG_ERROR(
+				"hfa384x_drvr_readpda() failed, "
+				"result=%d\n",
+				result);
+
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			msg->resultcode.status =
+				P80211ENUM_msgitem_status_data_ok;
+			DBFEXIT;
+			return 0;
+		}
+		msg->pda.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_readcis
+*
+* Collect the CIS data and put it in the message.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_readcis(wlandevice_t *wlandev, void *msgp)
+{
+	int			result;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_readcis_t	*msg = msgp;
+
+	DBFENTER;
+
+        memset(msg->cis.data, 0, sizeof(msg->cis.data));
+
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CIS,
+					msg->cis.data, HFA384x_RID_CIS_LEN);
+	if ( result ) {
+		WLAN_LOG_INFO("prism2mgmt_readcis: read(cis) failed.\n");
+		msg->cis.status = P80211ENUM_msgitem_status_no_value;
+		msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+
+		}
+	else {
+		msg->cis.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		}
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	DBFEXIT;
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_auxport_state
+*
+* Enables/Disables the card's auxiliary port.  Should be called
+* before and after a sequence of auxport_read()/auxport_write()
+* calls.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_auxport_state(wlandevice_t *wlandev, void *msgp)
+{
+	p80211msg_p2req_auxport_state_t	*msg = msgp;
+
+#if (WLAN_HOSTIF != WLAN_USB)
+	hfa384x_t		*hw = wlandev->priv;
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	if (msg->enable.data == P80211ENUM_truth_true) {
+		if ( hfa384x_cmd_aux_enable(hw, 0) ) {
+			msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+		} else {
+			msg->resultcode.data = P80211ENUM_resultcode_success;
+		}
+	} else {
+		hfa384x_cmd_aux_disable(hw);
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+	}
+
+#else /* !USB */
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+
+#endif /* WLAN_HOSTIF != WLAN_USB */
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_auxport_read
+*
+* Copies data from the card using the auxport.  The auxport must
+* have previously been enabled.  Note: this is not the way to
+* do downloads, see the [ram|flash]dl functions.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_auxport_read(wlandevice_t *wlandev, void *msgp)
+{
+#if (WLAN_HOSTIF != WLAN_USB)
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_auxport_read_t	*msg = msgp;
+	UINT32			addr;
+	UINT32			len;
+	UINT8*			buf;
+	UINT32			maxlen = sizeof(msg->data.data);
+	DBFENTER;
+
+	if ( hw->auxen ) {
+		addr = msg->addr.data;
+		len = msg->len.data;
+		buf = msg->data.data;
+		if ( len <= maxlen ) {  /* max read/write size */
+			hfa384x_copy_from_aux(hw, addr, HFA384x_AUX_CTL_EXTDS, buf, len);
+			msg->resultcode.data = P80211ENUM_resultcode_success;
+		} else {
+			WLAN_LOG_DEBUG(1,"Attempt to read > maxlen from auxport.\n");
+			msg->resultcode.data = P80211ENUM_resultcode_refused;
+		}
+
+	} else {
+		msg->resultcode.data = P80211ENUM_resultcode_refused;
+	}
+	msg->data.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	DBFEXIT;
+	return 0;
+#else
+	DBFENTER;
+
+	WLAN_LOG_ERROR("prism2mgmt_auxport_read: Not supported on USB.\n");
+
+	DBFEXIT;
+	return 0;
+#endif
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_auxport_write
+*
+* Copies data to the card using the auxport.  The auxport must
+* have previously been enabled.  Note: this is not the way to
+* do downloads, see the [ram|flash]dl functions.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_auxport_write(wlandevice_t *wlandev, void *msgp)
+{
+#if (WLAN_HOSTIF != WLAN_USB)
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_auxport_write_t	*msg = msgp;
+	UINT32			addr;
+	UINT32			len;
+	UINT8*			buf;
+	UINT32			maxlen = sizeof(msg->data.data);
+	DBFENTER;
+
+	if ( hw->auxen ) {
+		addr = msg->addr.data;
+		len = msg->len.data;
+		buf = msg->data.data;
+		if ( len <= maxlen ) {  /* max read/write size */
+			hfa384x_copy_to_aux(hw, addr, HFA384x_AUX_CTL_EXTDS, buf, len);
+		} else {
+			WLAN_LOG_DEBUG(1,"Attempt to write > maxlen from auxport.\n");
+			msg->resultcode.data = P80211ENUM_resultcode_refused;
+		}
+
+	} else {
+		msg->resultcode.data = P80211ENUM_resultcode_refused;
+	}
+	msg->data.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	DBFEXIT;
+	return 0;
+#else
+	DBFENTER;
+	WLAN_LOG_ERROR("prism2mgmt_auxport_read: Not supported on USB.\n");
+	DBFEXIT;
+	return 0;
+#endif
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_low_level
+*
+* Puts the card into the desired test mode.
+*
+* Arguments:
+*       wlandev         wlan device structure
+*       msgp            ptr to msg buffer
+*
+* Returns:
+*       0       success and done
+*       <0      success, but we're waiting for something to finish.
+*       >0      an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*       process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_low_level(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+        p80211msg_p2req_low_level_t     *msg = msgp;
+	hfa384x_metacmd_t cmd;
+        DBFENTER;
+
+        msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+        /* call some routine to execute the test command */
+	cmd.cmd = (UINT16) msg->command.data;
+	cmd.parm0 = (UINT16) msg->param0.data;
+	cmd.parm1 = (UINT16) msg->param1.data;
+	cmd.parm2 = (UINT16) msg->param2.data;
+
+        hfa384x_drvr_low_level(hw,&cmd);
+
+        msg->resp0.data = (UINT32) cmd.result.resp0;
+        msg->resp1.data = (UINT32) cmd.result.resp1;
+        msg->resp2.data = (UINT32) cmd.result.resp2;
+
+        msg->resultcode.data = P80211ENUM_resultcode_success;
+
+        DBFEXIT;
+        return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_test_command
+*
+* Puts the card into the desired test mode.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_test_command(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_test_command_t	*msg = msgp;
+	hfa384x_metacmd_t cmd;
+
+        DBFENTER;
+
+	cmd.cmd = ((UINT16) msg->testcode.data) << 8 | 0x38;
+	cmd.parm0 = (UINT16) msg->testparam.data;
+	cmd.parm1 = 0;
+	cmd.parm2 = 0;
+
+        /* call some routine to execute the test command */
+
+        hfa384x_drvr_low_level(hw,&cmd);
+
+        msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+        msg->resultcode.data = P80211ENUM_resultcode_success;
+
+        msg->status.status = P80211ENUM_msgitem_status_data_ok;
+        msg->status.data = cmd.result.status;
+        msg->resp0.status = P80211ENUM_msgitem_status_data_ok;
+        msg->resp0.data = cmd.result.resp0;
+        msg->resp1.status = P80211ENUM_msgitem_status_data_ok;
+        msg->resp1.data = cmd.result.resp1;
+        msg->resp2.status = P80211ENUM_msgitem_status_data_ok;
+        msg->resp2.data = cmd.result.resp2;
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_mmi_read
+*
+* Read from one of the MMI registers.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_mmi_read(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_mmi_read_t	*msg = msgp;
+	UINT32 resp = 0;
+
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	/* call some routine to execute the test command */
+
+	hfa384x_drvr_mmi_read(hw, msg->addr.data, &resp);
+
+	/* I'm not sure if this is "architecturally" correct, but it
+           is expedient. */
+
+	msg->value.status = P80211ENUM_msgitem_status_data_ok;
+	msg->value.data = resp;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	DBFEXIT;
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_mmi_write
+*
+* Write a data value to one of the MMI registers.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_mmi_write(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_mmi_write_t	*msg = msgp;
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	/* call some routine to execute the test command */
+
+	hfa384x_drvr_mmi_write(hw, msg->addr.data, msg->data.data);
+
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	DBFEXIT;
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_ramdl_state
+*
+* Establishes the beginning/end of a card RAM download session.
+*
+* It is expected that the ramdl_write() function will be called
+* one or more times between the 'enable' and 'disable' calls to
+* this function.
+*
+* Note: This function should not be called when a mac comm port
+*       is active.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_ramdl_state_t	*msg = msgp;
+	DBFENTER;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		WLAN_LOG_ERROR(
+			"ramdl_state(): may only be called "
+			"in the fwload state.\n");
+		msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		DBFEXIT;
+		return 0;
+	}
+
+	/*
+	** Note: Interrupts are locked out if this is an AP and are NOT
+	** locked out if this is a station.
+	*/
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	if  ( msg->enable.data == P80211ENUM_truth_true ) {
+		if ( hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data) ) {
+			msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+		} else {
+			msg->resultcode.data = P80211ENUM_resultcode_success;
+		}
+	} else {
+		hfa384x_drvr_ramdl_disable(hw);
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_ramdl_write
+*
+* Writes a buffer to the card RAM using the download state.  This
+* is for writing code to card RAM.  To just read or write raw data
+* use the aux functions.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_ramdl_write_t	*msg = msgp;
+	UINT32			addr;
+	UINT32			len;
+	UINT8			*buf;
+	DBFENTER;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		WLAN_LOG_ERROR(
+			"ramdl_write(): may only be called "
+			"in the fwload state.\n");
+		msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		DBFEXIT;
+		return 0;
+	}
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	/* first validate the length */
+	if  ( msg->len.data > sizeof(msg->data.data) ) {
+		msg->resultcode.status = P80211ENUM_resultcode_invalid_parameters;
+		return 0;
+	}
+	/* call the hfa384x function to do the write */
+	addr = msg->addr.data;
+	len = msg->len.data;
+	buf = msg->data.data;
+	if ( hfa384x_drvr_ramdl_write(hw, addr, buf, len) ) {
+		msg->resultcode.data = P80211ENUM_resultcode_refused;
+
+	}
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_flashdl_state
+*
+* Establishes the beginning/end of a card Flash download session.
+*
+* It is expected that the flashdl_write() function will be called
+* one or more times between the 'enable' and 'disable' calls to
+* this function.
+*
+* Note: This function should not be called when a mac comm port
+*       is active.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
+{
+	int			result = 0;
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_flashdl_state_t	*msg = msgp;
+	DBFENTER;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		WLAN_LOG_ERROR(
+			"flashdl_state(): may only be called "
+			"in the fwload state.\n");
+		msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		DBFEXIT;
+		return 0;
+	}
+
+	/*
+	** Note: Interrupts are locked out if this is an AP and are NOT
+	** locked out if this is a station.
+	*/
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	if  ( msg->enable.data == P80211ENUM_truth_true ) {
+		if ( hfa384x_drvr_flashdl_enable(hw) ) {
+			msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+		} else {
+			msg->resultcode.data = P80211ENUM_resultcode_success;
+		}
+	} else {
+		hfa384x_drvr_flashdl_disable(hw);
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		/* NOTE: At this point, the MAC is in the post-reset
+		 * state and the driver is in the fwload state.
+		 * We need to get the MAC back into the fwload
+		 * state.  To do this, we set the nsdstate to HWPRESENT
+		 * and then call the ifstate function to redo everything
+		 * that got us into the fwload state.
+		 */
+		wlandev->msdstate = WLAN_MSD_HWPRESENT;
+		result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
+		if (result != P80211ENUM_resultcode_success) {
+			WLAN_LOG_ERROR("prism2sta_ifstate(fwload) failed,"
+				"P80211ENUM_resultcode=%d\n", result);
+			msg->resultcode.data =
+				P80211ENUM_resultcode_implementation_failure;
+			result = -1;
+		}
+	}
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_flashdl_write
+*
+*
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	p80211msg_p2req_flashdl_write_t	*msg = msgp;
+	UINT32			addr;
+	UINT32			len;
+	UINT8			*buf;
+	DBFENTER;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		WLAN_LOG_ERROR(
+			"flashdl_write(): may only be called "
+			"in the fwload state.\n");
+		msg->resultcode.data =
+			P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		DBFEXIT;
+		return 0;
+	}
+
+	/*
+	** Note: Interrupts are locked out if this is an AP and are NOT
+	** locked out if this is a station.
+	*/
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	/* first validate the length */
+	if  ( msg->len.data > sizeof(msg->data.data) ) {
+		msg->resultcode.status =
+			P80211ENUM_resultcode_invalid_parameters;
+		return 0;
+	}
+	/* call the hfa384x function to do the write */
+	addr = msg->addr.data;
+	len = msg->len.data;
+	buf = msg->data.data;
+	if ( hfa384x_drvr_flashdl_write(hw, addr, buf, len) ) {
+		msg->resultcode.data = P80211ENUM_resultcode_refused;
+
+	}
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_dump_state
+*
+* Dumps the driver's and hardware's current state via the kernel
+* log at KERN_NOTICE level.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_dump_state(wlandevice_t *wlandev, void *msgp)
+{
+	p80211msg_p2req_dump_state_t	*msg = msgp;
+	int				result = 0;
+
+#if (WLAN_HOSTIF != WLAN_USB)
+	hfa384x_t		*hw = wlandev->priv;
+	UINT16				auxbuf[15];
+	DBFENTER;
+
+	WLAN_LOG_NOTICE("prism2 driver and hardware state:\n");
+	if  ( (result = hfa384x_cmd_aux_enable(hw, 0)) ) {
+		WLAN_LOG_ERROR("aux_enable failed, result=%d\n", result);
+		goto failed;
+	}
+	hfa384x_copy_from_aux(hw,
+		0x01e2,
+		HFA384x_AUX_CTL_EXTDS,
+		auxbuf,
+		sizeof(auxbuf));
+	hfa384x_cmd_aux_disable(hw);
+	WLAN_LOG_NOTICE("  cmac: FreeBlocks=%d\n", auxbuf[5]);
+	WLAN_LOG_NOTICE("  cmac: IntEn=0x%02x EvStat=0x%02x\n",
+		hfa384x_getreg(hw, HFA384x_INTEN),
+		hfa384x_getreg(hw, HFA384x_EVSTAT));
+
+	#ifdef USE_FID_STACK
+	WLAN_LOG_NOTICE("  drvr: txfid_top=%d stacksize=%d\n",
+		hw->txfid_top,HFA384x_DRVR_FIDSTACKLEN_MAX);
+	#else
+	WLAN_LOG_NOTICE("  drvr: txfid_head=%d txfid_tail=%d txfid_N=%d\n",
+		hw->txfid_head, hw->txfid_tail, hw->txfid_N);
+	#endif
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+#else /* (WLAN_HOSTIF == WLAN_USB) */
+
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	goto failed;
+
+#endif /* (WLAN_HOSTIF != WLAN_USB) */
+
+failed:
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_channel_info
+*
+* Issues a ChannelInfoRequest.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_channel_info(wlandevice_t *wlandev, void *msgp)
+{
+	p80211msg_p2req_channel_info_t	*msg=msgp;
+	hfa384x_t			*hw = wlandev->priv;
+	int				result, i, n=0;
+	UINT16				channel_mask=0;
+	hfa384x_ChannelInfoRequest_data_t	chinforeq;
+	// unsigned long 			now;
+
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* Not supported in STA f/w */
+		P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_not_supported);
+		goto done;
+	}
+
+	/*** ACCESS POINT ***/
+
+#define CHINFO_TIMEOUT 2
+
+	P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_success);
+
+	/* setting default value for channellist = all channels */
+	if (!msg->channellist.data) {
+		P80211_SET_INT(msg->channellist, 0x00007FFE);
+	}
+	/* setting default value for channeldwelltime = 100 ms */
+	if (!msg->channeldwelltime.data) {
+		P80211_SET_INT(msg->channeldwelltime, 100);
+	}
+	channel_mask = (UINT16) (msg->channellist.data >> 1);
+	for (i=0, n=0; i < 14; i++) {
+		if (channel_mask & (1<<i)) {
+			n++;
+		}
+	}
+	P80211_SET_INT(msg->numchinfo, n);
+	chinforeq.channelList = host2hfa384x_16(channel_mask);
+	chinforeq.channelDwellTime = host2hfa384x_16(msg->channeldwelltime.data);
+
+	atomic_set(&hw->channel_info.done, 1);
+
+	result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CHANNELINFOREQUEST,
+					 &chinforeq, HFA384x_RID_CHANNELINFOREQUEST_LEN);
+	if ( result ) {
+		WLAN_LOG_ERROR("setconfig(CHANNELINFOREQUEST) failed. result=%d\n",
+				result);
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto done;
+	}
+	/*
+	now = jiffies;
+	while (atomic_read(&hw->channel_info.done) != 1) {
+		if ((jiffies - now) > CHINFO_TIMEOUT*HZ) {
+			WLAN_LOG_NOTICE("ChannelInfo results not received in %d seconds, aborting.\n",
+					CHINFO_TIMEOUT);
+			msg->resultcode.data = P80211ENUM_resultcode_timeout;
+			goto done;
+		}
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(HZ/4);
+		current->state = TASK_RUNNING;
+	}
+	*/
+
+done:
+
+	DBFEXIT;
+	return 0;
+}
+
+/*----------------------------------------------------------------
+* prism2mgmt_channel_info_results
+*
+* Returns required ChannelInfo result.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+----------------------------------------------------------------*/
+int prism2mgmt_channel_info_results(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t			*hw = wlandev->priv;
+
+	p80211msg_p2req_channel_info_results_t	*msg=msgp;
+	int				result=0;
+	int		channel;
+
+	DBFENTER;
+
+	if (!hw->ap) {
+
+		/*** STATION ***/
+
+		/* Not supported in STA f/w */
+		P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_not_supported);
+		goto done;
+	}
+
+	/*** ACCESS POINT ***/
+
+	switch (atomic_read(&hw->channel_info.done)) {
+	case 0: msg->resultcode.status = P80211ENUM_msgitem_status_no_value;
+		goto done;
+	case 1: msg->resultcode.status = P80211ENUM_msgitem_status_incomplete_itemdata;
+		goto done;
+	}
+
+	P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_success);
+	channel=msg->channel.data-1;
+
+	if (channel < 0 || ! (hw->channel_info.results.scanchannels & 1<<channel) ) {
+		msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		goto done;
+	}
+	WLAN_LOG_DEBUG(2, "chinfo_results: channel %d, avg/peak level=%d/%d dB, active=%d\n",
+			channel+1,
+			hw->channel_info.results.result[channel].anl,
+			hw->channel_info.results.result[channel].pnl,
+			hw->channel_info.results.result[channel].active
+		);
+	P80211_SET_INT(msg->avgnoiselevel, hw->channel_info.results.result[channel].anl);
+	P80211_SET_INT(msg->peaknoiselevel, hw->channel_info.results.result[channel].pnl);
+	P80211_SET_INT(msg->bssactive, hw->channel_info.results.result[channel].active &
+		HFA384x_CHINFORESULT_BSSACTIVE
+                ? P80211ENUM_truth_true
+                : P80211ENUM_truth_false) ;
+	P80211_SET_INT(msg->pcfactive, hw->channel_info.results.result[channel].active &
+		HFA384x_CHINFORESULT_PCFACTIVE
+                ? P80211ENUM_truth_true
+                : P80211ENUM_truth_false) ;
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_autojoin
+*
+* Associate with an ESS.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t			*hw = wlandev->priv;
+	int 			result = 0;
+	UINT16			reg;
+	UINT16			port_type;
+	p80211msg_lnxreq_autojoin_t	*msg = msgp;
+	p80211pstrd_t		*pstr;
+	UINT8			bytebuf[256];
+	hfa384x_bytestr_t	*p2bytestr = (hfa384x_bytestr_t*)bytebuf;
+	DBFENTER;
+
+	wlandev->macmode = WLAN_MACMODE_NONE;
+
+	/* Set the SSID */
+	memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
+
+	if (hw->ap) {
+
+		/*** ACCESS POINT ***/
+
+		/* Never supported on AP */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto done;
+	}
+
+	/* Disable the Port */
+	hfa384x_drvr_disable(hw, 0);
+
+	/*** STATION ***/
+	/* Set the TxRates */
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
+
+	/* Set the auth type */
+	if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
+		reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
+	} else {
+		reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
+	}
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
+
+	/* Set the ssid */
+	memset(bytebuf, 0, 256);
+	pstr = (p80211pstrd_t*)&(msg->ssid.data);
+	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+        result = hfa384x_drvr_setconfig(
+			hw, HFA384x_RID_CNFDESIREDSSID,
+			bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+#if 0
+	/* we can use the new-fangled auto-unknown mode if the firmware
+	   is 1.3.3 or newer */
+	if (HFA384x_FIRMARE_VERSION(hw->ident_sta_fw.major,
+				    hw->ident_sta_fw.minor,
+				    hw->ident_sta_fw.variant) >=
+	    HFA384x_FIRMWARE_VERSION(1,3,3)) {
+		/* Set up the IBSS options */
+		reg =  HFA384x_CREATEIBSS_JOINESS_JOINCREATEIBSS;
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CREATEIBSS, reg);
+
+		/* Set the PortType */
+		port_type = HFA384x_PORTTYPE_IBSS;
+	} else {
+		port_type = HFA384x_PORTTYPE_BSS;
+	}
+#else
+	port_type = HFA384x_PORTTYPE_BSS;
+#endif
+	/* Set the PortType */
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
+
+	/* Enable the Port */
+	hfa384x_drvr_enable(hw, 0);
+
+	/* Set the resultcode */
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_wlansniff
+*
+* Start or stop sniffing.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
+{
+	int 			result = 0;
+	p80211msg_lnxreq_wlansniff_t	*msg = msgp;
+
+	hfa384x_t			*hw = wlandev->priv;
+	UINT16			word;
+
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	switch (msg->enable.data)
+	{
+	case P80211ENUM_truth_false:
+		/* Confirm that we're in monitor mode */
+		if ( wlandev->netdev->type == ARPHRD_ETHER ) {
+			msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+			result = 0;
+			goto exit;
+		}
+		/* Disable monitor mode */
+		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+				"failed to disable monitor mode, result=%d\n",
+				result);
+			goto failed;
+		}
+		/* Disable port 0 */
+		result = hfa384x_drvr_disable(hw, 0);
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+			"failed to disable port 0 after sniffing, result=%d\n",
+			result);
+			goto failed;
+		}
+		/* Clear the driver state */
+		wlandev->netdev->type = ARPHRD_ETHER;
+
+		/* Restore the wepflags */
+		result = hfa384x_drvr_setconfig16(hw,
+				HFA384x_RID_CNFWEPFLAGS,
+				hw->presniff_wepflags);
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+			"failed to restore wepflags=0x%04x, result=%d\n",
+			hw->presniff_wepflags,
+			result);
+			goto failed;
+		}
+
+		/* Set the port to its prior type and enable (if necessary) */
+		if (hw->presniff_port_type != 0 ) {
+			word = hw->presniff_port_type;
+			result = hfa384x_drvr_setconfig16(hw,
+				HFA384x_RID_CNFPORTTYPE, word);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+				"failed to restore porttype, result=%d\n",
+				result);
+				goto failed;
+			}
+
+			/* Enable the port */
+			result = hfa384x_drvr_enable(hw, 0);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1, "failed to enable port to presniff setting, result=%d\n", result);
+				goto failed;
+			}
+		} else {
+			result = hfa384x_drvr_disable(hw, 0);
+
+		}
+
+		WLAN_LOG_INFO("monitor mode disabled\n");
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		result = 0;
+		goto exit;
+		break;
+	case P80211ENUM_truth_true:
+		/* Disable the port (if enabled), only check Port 0 */
+		if ( hw->port_enabled[0]) {
+			if (wlandev->netdev->type == ARPHRD_ETHER) {
+				/* Save macport 0 state */
+				result = hfa384x_drvr_getconfig16(hw,
+								  HFA384x_RID_CNFPORTTYPE,
+								  &(hw->presniff_port_type));
+				if ( result ) {
+					WLAN_LOG_DEBUG(1,"failed to read porttype, result=%d\n", result);
+					goto failed;
+				}
+				/* Save the wepflags state */
+				result = hfa384x_drvr_getconfig16(hw,
+								  HFA384x_RID_CNFWEPFLAGS,
+								  &(hw->presniff_wepflags));
+				if ( result ) {
+					WLAN_LOG_DEBUG(1,"failed to read wepflags, result=%d\n", result);
+					goto failed;
+				}
+				hfa384x_drvr_stop(hw);
+				result = hfa384x_drvr_start(hw);
+				if ( result ) {
+					WLAN_LOG_DEBUG(1,
+						       "failed to restart the card for sniffing, result=%d\n",
+						       result);
+					goto failed;
+				}
+			} else {
+				/* Disable the port */
+				result = hfa384x_drvr_disable(hw, 0);
+				if ( result ) {
+					WLAN_LOG_DEBUG(1,
+						       "failed to enable port for sniffing, result=%d\n",
+						       result);
+					goto failed;
+				}
+			}
+		} else {
+			hw->presniff_port_type = 0;
+		}
+
+		/* Set the channel we wish to sniff  */
+		word = msg->channel.data;
+		result = hfa384x_drvr_setconfig16(hw,
+						  HFA384x_RID_CNFOWNCHANNEL, word);
+		hw->sniff_channel=word;
+
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+				       "failed to set channel %d, result=%d\n",
+					       word,
+				       result);
+			goto failed;
+		}
+
+		/* Now if we're already sniffing, we can skip the rest */
+		if (wlandev->netdev->type != ARPHRD_ETHER) {
+			/* Set the port type to pIbss */
+			word = HFA384x_PORTTYPE_PSUEDOIBSS;
+			result = hfa384x_drvr_setconfig16(hw,
+							  HFA384x_RID_CNFPORTTYPE, word);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+					       "failed to set porttype %d, result=%d\n",
+					       word,
+					       result);
+				goto failed;
+			}
+			if ((msg->keepwepflags.status == P80211ENUM_msgitem_status_data_ok) && (msg->keepwepflags.data != P80211ENUM_truth_true)) {
+				/* Set the wepflags for no decryption */
+				word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT |
+					HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
+				result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFWEPFLAGS, word);
+			}
+
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+					       "failed to set wepflags=0x%04x, result=%d\n",
+					       word,
+					       result);
+				goto failed;
+			}
+		}
+
+		/* Do we want to strip the FCS in monitor mode? */
+		if ((msg->stripfcs.status == P80211ENUM_msgitem_status_data_ok) && (msg->stripfcs.data == P80211ENUM_truth_true)) {
+			hw->sniff_fcs = 0;
+		} else {
+			hw->sniff_fcs = 1;
+		}
+
+		/* Do we want to truncate the packets? */
+		if (msg->packet_trunc.status == P80211ENUM_msgitem_status_data_ok) {
+			hw->sniff_truncate = msg->packet_trunc.data;
+		} else {
+			hw->sniff_truncate = 0;
+		}
+
+		/* Enable the port */
+		result = hfa384x_drvr_enable(hw, 0);
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+			"failed to enable port for sniffing, result=%d\n",
+			result);
+			goto failed;
+		}
+		/* Enable monitor mode */
+		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+			"failed to enable monitor mode, result=%d\n",
+			result);
+			goto failed;
+		}
+
+		if (wlandev->netdev->type == ARPHRD_ETHER) {
+			WLAN_LOG_INFO("monitor mode enabled\n");
+		}
+
+		/* Set the driver state */
+		/* Do we want the prism2 header? */
+		if ((msg->prismheader.status == P80211ENUM_msgitem_status_data_ok) && (msg->prismheader.data == P80211ENUM_truth_true)) {
+			hw->sniffhdr = 0;
+			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
+		} else if ((msg->wlanheader.status == P80211ENUM_msgitem_status_data_ok) && (msg->wlanheader.data == P80211ENUM_truth_true)) {
+			hw->sniffhdr = 1;
+			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
+		} else {
+			wlandev->netdev->type = ARPHRD_IEEE80211;
+		}
+
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		result = 0;
+		goto exit;
+		break;
+	default:
+		msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		result = 0;
+		goto exit;
+		break;
+	}
+
+failed:
+	msg->resultcode.data = P80211ENUM_resultcode_refused;
+	result = 0;
+exit:
+
+	DBFEXIT;
+	return result;
+}
diff --git a/drivers/staging/wlan-ng/prism2mgmt.h b/drivers/staging/wlan-ng/prism2mgmt.h
new file mode 100644
index 0000000..733fd99
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2mgmt.h
@@ -0,0 +1,182 @@
+/* prism2mgmt.h
+*
+* Declares the mgmt command handler functions
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file contains the constants and data structures for interaction
+* with the hfa384x Wireless LAN (WLAN) Media Access Contoller (MAC).
+* The hfa384x is a portion of the Harris PRISM(tm) WLAN chipset.
+*
+* [Implementation and usage notes]
+*
+* [References]
+*   CW10 Programmer's Manual v1.5
+*   IEEE 802.11 D10.0
+*
+*    --------------------------------------------------------------------
+*/
+
+#ifndef _PRISM2MGMT_H
+#define _PRISM2MGMT_H
+
+
+/*=============================================================*/
+/*------ Constants --------------------------------------------*/
+
+/*=============================================================*/
+/*------ Macros -----------------------------------------------*/
+
+/*=============================================================*/
+/*------ Types and their related constants --------------------*/
+
+/*=============================================================*/
+/*------ Static variable externs ------------------------------*/
+
+#if (WLAN_HOSTIF != WLAN_USB)
+extern int      prism2_bap_timeout;
+extern int	prism2_irq_evread_max;
+#endif
+extern int	prism2_debug;
+extern int      prism2_reset_holdtime;
+extern int      prism2_reset_settletime;
+/*=============================================================*/
+/*--- Function Declarations -----------------------------------*/
+/*=============================================================*/
+
+UINT32
+prism2sta_ifstate(wlandevice_t *wlandev, UINT32 ifstate);
+
+void
+prism2sta_ev_dtim(wlandevice_t *wlandev);
+void
+prism2sta_ev_infdrop(wlandevice_t *wlandev);
+void
+prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+void
+prism2sta_ev_txexc(wlandevice_t *wlandev, UINT16 status);
+void
+prism2sta_ev_tx(wlandevice_t *wlandev, UINT16 status);
+void
+prism2sta_ev_rx(wlandevice_t *wlandev, struct sk_buff *skb);
+void
+prism2sta_ev_alloc(wlandevice_t *wlandev);
+
+
+int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_powermgmt(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_join(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_p2_join(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_authenticate(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_deauthenticate(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_disassociate(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_reset(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_start(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_readcis(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_auxport_state(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_auxport_read(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_auxport_write(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_low_level(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_test_command(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_mmi_read(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_mmi_write(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_mm_state(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_dump_state(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_enable(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_channel_info(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_channel_info_results(wlandevice_t *wlandev, void *msgp);
+int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp);
+
+/*---------------------------------------------------------------
+* conversion functions going between wlan message data types and
+* Prism2 data types
+---------------------------------------------------------------*/
+/* byte area conversion functions*/
+void prism2mgmt_pstr2bytearea(UINT8 *bytearea, p80211pstrd_t *pstr);
+void prism2mgmt_bytearea2pstr(UINT8 *bytearea, p80211pstrd_t *pstr, int len);
+
+/* byte string conversion functions*/
+void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr);
+void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr);
+
+/* integer conversion functions */
+void prism2mgmt_prism2int2p80211int(UINT16 *prism2int, UINT32 *wlanint);
+void prism2mgmt_p80211int2prism2int(UINT16 *prism2int, UINT32 *wlanint);
+
+/* enumerated integer conversion functions */
+void prism2mgmt_prism2enum2p80211enum(UINT16 *prism2enum, UINT32 *wlanenum, UINT16 rid);
+void prism2mgmt_p80211enum2prism2enum(UINT16 *prism2enum, UINT32 *wlanenum, UINT16 rid);
+
+/* functions to convert a bit area to/from an Operational Rate Set */
+void prism2mgmt_get_oprateset(UINT16 *rate, p80211pstrd_t *pstr);
+void prism2mgmt_set_oprateset(UINT16 *rate, p80211pstrd_t *pstr);
+
+/* functions to convert Group Addresses */
+void prism2mgmt_get_grpaddr(UINT32 did,
+	p80211pstrd_t *pstr, hfa384x_t *priv );
+int prism2mgmt_set_grpaddr(UINT32 did,
+	UINT8 *prism2buf, p80211pstrd_t *pstr, hfa384x_t *priv );
+int prism2mgmt_get_grpaddr_index( UINT32 did );
+
+void prism2sta_processing_defer(struct work_struct *data);
+
+void prism2sta_commsqual_defer(struct work_struct *data);
+void prism2sta_commsqual_timer(unsigned long data);
+
+/*=============================================================*/
+/*--- Inline Function Definitions (if supported) --------------*/
+/*=============================================================*/
+
+
+
+#endif
diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c
new file mode 100644
index 0000000..268fd9b
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2mib.c
@@ -0,0 +1,3799 @@
+/* src/prism2/driver/prism2mib.c
+*
+* Management request for mibset/mibget
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* The functions in this file handle the mibset/mibget management
+* functions.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+#define WLAN_DBVAR	prism2_debug
+
+#include "version.h"
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+
+#include "wlan_compat.h"
+
+//#if (WLAN_HOSTIF == WLAN_PCMCIA)
+//#include <pcmcia/version.h>
+//#include <pcmcia/cs_types.h>
+//#include <pcmcia/cs.h>
+//#include <pcmcia/cistpl.h>
+//#include <pcmcia/ds.h>
+//#include <pcmcia/cisreg.h>
+//#endif
+//
+//#if ((WLAN_HOSTIF == WLAN_PLX) || (WLAN_HOSTIF == WLAN_PCI))
+//#include <linux/ioport.h>
+//#include <linux/pci.h>
+//endif
+
+//#if (WLAN_HOSTIF == WLAN_USB)
+#include <linux/usb.h>
+//#endif
+
+#include "wlan_compat.h"
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "hfa384x.h"
+#include "prism2mgmt.h"
+
+/*================================================================*/
+/* Local Constants */
+
+#define MIB_TMP_MAXLEN    200    /* Max length of RID record (in bytes). */
+
+/*================================================================*/
+/* Local Types */
+
+#define  F_AP         0x1        /* MIB is supported on Access Points. */
+#define  F_STA        0x2        /* MIB is supported on stations. */
+#define  F_READ       0x4        /* MIB may be read. */
+#define  F_WRITE      0x8        /* MIB may be written. */
+
+typedef struct mibrec
+{
+    UINT32   did;
+    UINT16   flag;
+    UINT16   parm1;
+    UINT16   parm2;
+    UINT16   parm3;
+    int      (*func)(struct mibrec                *mib,
+                     int                          isget,
+                     wlandevice_t                 *wlandev,
+                     hfa384x_t                    *hw,
+                     p80211msg_dot11req_mibset_t  *msg,
+                     void                         *data);
+} mibrec_t;
+
+/*================================================================*/
+/* Local Function Declarations */
+
+static int prism2mib_bytestr2pstr(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_bytearea2pstr(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_uint32(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_uint32array(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_uint32offset(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_truth(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_preamble(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_flag(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_appcfinfoflag(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_regulatorydomains(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_wepdefaultkey(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_powermanagement(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_privacyinvoked(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_excludeunencrypted(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_fragmentationthreshold(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_operationalrateset(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_groupaddress(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_fwid(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_authalg(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_authalgenable(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static int prism2mib_priv(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data);
+
+static void prism2mib_priv_authlist(
+hfa384x_t      *hw,
+prism2sta_authlist_t  *list);
+
+static void prism2mib_priv_accessmode(
+hfa384x_t         *hw,
+UINT32            mode);
+
+static void prism2mib_priv_accessallow(
+hfa384x_t         *hw,
+p80211macarray_t  *macarray);
+
+static void prism2mib_priv_accessdeny(
+hfa384x_t         *hw,
+p80211macarray_t  *macarray);
+
+static void prism2mib_priv_deauthenticate(
+hfa384x_t         *hw,
+UINT8             *addr);
+
+/*================================================================*/
+/* Local Static Definitions */
+
+static mibrec_t mibtab[] = {
+
+    /* dot11smt MIB's */
+
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11StationID,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNMACADDR, HFA384x_RID_CNFOWNMACADDR_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11MediumOccupancyLimit,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 0,
+          prism2mib_uint32offset },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11CFPollable,
+          F_STA | F_READ,
+          HFA384x_RID_CFPOLLABLE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11CFPPeriod,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 1,
+          prism2mib_uint32offset },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11CFPMaxDuration,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 2,
+          prism2mib_uint32offset },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11AuthenticationResponseTimeOut,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFAUTHRSPTIMEOUT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11PrivacyOptionImplemented,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PRIVACYOPTIMP, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11PowerManagementMode,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFPMENABLED, 0, 0,
+          prism2mib_powermanagement },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11DesiredSSID,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFDESIREDSSID, HFA384x_RID_CNFDESIREDSSID_LEN, 0,
+          prism2mib_bytestr2pstr },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11DesiredBSSType,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11OperationalRateSet,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL, 0, 0,
+          prism2mib_operationalrateset },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11OperationalRateSet,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL0, 0, 0,
+          prism2mib_operationalrateset },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11BeaconPeriod,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPBCNINT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11DTIMPeriod,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNDTIMPER, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11StationConfigTable_dot11AssociationResponseTimeOut,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PROTOCOLRSPTIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm1,
+          F_AP | F_STA | F_READ,
+          1, 0, 0,
+          prism2mib_authalg },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm2,
+          F_AP | F_STA | F_READ,
+          2, 0, 0,
+          prism2mib_authalg },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm3,
+          F_AP | F_STA | F_READ,
+          3, 0, 0,
+          prism2mib_authalg },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm4,
+          F_AP | F_STA | F_READ,
+          4, 0, 0,
+          prism2mib_authalg },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm5,
+          F_AP | F_STA | F_READ,
+          5, 0, 0,
+          prism2mib_authalg },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithm6,
+          F_AP | F_STA | F_READ,
+          6, 0, 0,
+          prism2mib_authalg },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable1,
+          F_AP | F_STA | F_READ | F_WRITE,
+          1, 0, 0,
+          prism2mib_authalgenable },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable2,
+          F_AP | F_STA | F_READ | F_WRITE,
+          2, 0, 0,
+          prism2mib_authalgenable },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable3,
+          F_AP | F_STA | F_READ | F_WRITE,
+          3, 0, 0,
+          prism2mib_authalgenable },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable4,
+          F_AP | F_STA | F_READ | F_WRITE,
+          4, 0, 0,
+          prism2mib_authalgenable },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable5,
+          F_AP | F_STA | F_READ | F_WRITE,
+          5, 0, 0,
+          prism2mib_authalgenable },
+    { DIDmib_dot11smt_dot11AuthenticationAlgorithmsTable_dot11AuthenticationAlgorithmsEnable6,
+          F_AP | F_STA | F_READ | F_WRITE,
+          6, 0, 0,
+          prism2mib_authalgenable },
+    { DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY0, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY1, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY2, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY3, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWEPFLAGS, HFA384x_WEPFLAGS_PRIVINVOKED, 0,
+          prism2mib_privacyinvoked },
+    { DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEYID, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWEPFLAGS, HFA384x_WEPFLAGS_EXCLUDE, 0,
+          prism2mib_excludeunencrypted },
+    { DIDmib_dot11phy_dot11PhyOperationTable_dot11ShortPreambleEnabled,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFSHORTPREAMBLE, 0, 0,
+          prism2mib_preamble },
+
+    /* dot11mac MIB's */
+
+    { DIDmib_dot11mac_dot11OperationTable_dot11MACAddress,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNMACADDR, HFA384x_RID_CNFOWNMACADDR_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH0, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_SHORTRETRYLIMIT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_LONGRETRYLIMIT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH0, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_MAXTXLIFETIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11mac_dot11OperationTable_dot11MaxReceiveLifetime,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_MAXRXLIFETIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address1,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address2,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address3,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address4,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address5,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address6,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address7,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address8,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address9,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address10,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address11,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address12,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address13,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address14,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address15,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address16,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address17,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address18,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address19,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address20,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address21,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address22,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address23,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address24,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address25,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address26,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address27,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address28,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address29,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address30,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address31,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+    { DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address32,
+          F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_groupaddress },
+
+    /* dot11phy MIB's */
+
+    { DIDmib_dot11phy_dot11PhyOperationTable_dot11PHYType,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PHYTYPE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11phy_dot11PhyOperationTable_dot11TempType,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_TEMPTYPE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel,
+          F_STA | F_READ,
+          HFA384x_RID_CURRENTCHANNEL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel,
+          F_AP | F_READ,
+          HFA384x_RID_CNFOWNCHANNEL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentCCAMode,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CCAMODE, 0, 0,
+          prism2mib_uint32 },
+
+    /* p2Table MIB's */
+
+    { DIDmib_p2_p2Table_p2MMTx,
+          F_AP | F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2EarlyBeacon,
+          F_AP | F_READ | F_WRITE,
+          BIT7, 0, 0,
+          prism2mib_appcfinfoflag },
+    { DIDmib_p2_p2Table_p2ReceivedFrameStatistics,
+          F_AP | F_STA | F_READ,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2CommunicationTallies,
+          F_AP | F_STA | F_READ,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2Authenticated,
+          F_AP | F_READ,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2Associated,
+          F_AP | F_READ,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2PowerSaveUserCount,
+          F_AP | F_READ,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2Comment,
+          F_AP | F_STA | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2AccessMode,
+          F_AP | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2AccessAllow,
+          F_AP | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2AccessDeny,
+          F_AP | F_READ | F_WRITE,
+          0, 0, 0,
+          prism2mib_priv },
+    { DIDmib_p2_p2Table_p2ChannelInfoResults,
+          F_AP | F_READ,
+          0, 0, 0,
+          prism2mib_priv },
+
+    /* p2Static MIB's */
+
+    { DIDmib_p2_p2Static_p2CnfPortType,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFPORTTYPE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfOwnMACAddress,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNMACADDR, HFA384x_RID_CNFOWNMACADDR_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfDesiredSSID,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFDESIREDSSID, HFA384x_RID_CNFDESIREDSSID_LEN, 0,
+          prism2mib_bytestr2pstr },
+    { DIDmib_p2_p2Static_p2CnfOwnChannel,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNCHANNEL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfOwnSSID,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNSSID, HFA384x_RID_CNFOWNSSID_LEN, 0,
+          prism2mib_bytestr2pstr },
+    { DIDmib_p2_p2Static_p2CnfOwnATIMWindow,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNATIMWIN, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfSystemScale,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFSYSSCALE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfMaxDataLength,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFMAXDATALEN, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR, HFA384x_RID_CNFWDSADDR_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfPMEnabled,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFPMENABLED, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfPMEPS,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFPMEPS, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfMulticastReceive,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFMULTICASTRX, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfMaxSleepDuration,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFMAXSLEEPDUR, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfPMHoldoverDuration,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFPMHOLDDUR, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfOwnName,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNNAME, HFA384x_RID_CNFOWNNAME_LEN, 0,
+          prism2mib_bytestr2pstr },
+    { DIDmib_p2_p2Static_p2CnfOwnDTIMPeriod,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFOWNDTIMPER, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress1,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR1, HFA384x_RID_CNFWDSADDR1_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress2,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR2, HFA384x_RID_CNFWDSADDR2_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress3,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR3, HFA384x_RID_CNFWDSADDR3_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress4,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR4, HFA384x_RID_CNFWDSADDR4_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress5,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR5, HFA384x_RID_CNFWDSADDR5_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfWDSAddress6,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFWDSADDR6, HFA384x_RID_CNFWDSADDR6_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2Static_p2CnfMulticastPMBuffering,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFMCASTPMBUFF, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfWEPDefaultKeyID,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEYID, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfWEPDefaultKey0,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY0, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_p2_p2Static_p2CnfWEPDefaultKey1,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY1, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_p2_p2Static_p2CnfWEPDefaultKey2,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY2, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_p2_p2Static_p2CnfWEPDefaultKey3,
+          F_AP | F_STA | F_WRITE,
+          HFA384x_RID_CNFWEPDEFAULTKEY3, 0, 0,
+          prism2mib_wepdefaultkey },
+    { DIDmib_p2_p2Static_p2CnfWEPFlags,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWEPFLAGS, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfAuthentication,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFAUTHENTICATION, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfMaxAssociatedStations,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFMAXASSOCSTATIONS, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfTxControl,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFTXCONTROL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfRoamingMode,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFROAMINGMODE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfHostAuthentication,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFHOSTAUTHASSOC, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfRcvCrcError,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFRCVCRCERROR, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfAltRetryCount,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFALTRETRYCNT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfBeaconInterval,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPBCNINT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfMediumOccupancyLimit,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 0,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2Static_p2CnfCFPPeriod,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 1,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2Static_p2CnfCFPMaxDuration,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 2,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2Static_p2CnfCFPFlags,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFAPPCFINFO, HFA384x_RID_CNFAPPCFINFO_LEN, 3,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2Static_p2CnfSTAPCFInfo,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFSTAPCFINFO, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfPriorityQUsage,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFPRIORITYQUSAGE, HFA384x_RID_CNFPRIOQUSAGE_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2Static_p2CnfTIMCtrl,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFTIMCTRL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfThirty2Tally,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFTHIRTY2TALLY, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfEnhSecurity,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFENHSECURITY, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfShortPreamble,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFSHORTPREAMBLE, 0, 0,
+          prism2mib_preamble },
+    { DIDmib_p2_p2Static_p2CnfExcludeLongPreamble,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_CNFEXCLONGPREAMBLE, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Static_p2CnfAuthenticationRspTO,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFAUTHRSPTIMEOUT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfBasicRates,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFBASICRATES, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Static_p2CnfSupportedRates,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFSUPPRATES, 0, 0,
+          prism2mib_uint32 },
+
+    /* p2Dynamic MIB's */
+
+    { DIDmib_p2_p2Dynamic_p2CreateIBSS,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CREATEIBSS, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2PromiscuousMode,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_PROMISCMODE, 0, 0,
+          prism2mib_truth },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold0,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH0, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold1,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH1, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold2,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH2, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold3,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH3, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold4,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH4, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold5,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH5, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2FragmentationThreshold6,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_FRAGTHRESH6, 0, 0,
+          prism2mib_fragmentationthreshold },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold0,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH0, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold1,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH1, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold2,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH2, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold3,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH3, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold4,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH4, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold5,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH5, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2RTSThreshold6,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_RTSTHRESH6, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl0,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL0, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl1,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL1, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl2,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL2, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl3,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL3, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl4,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL4, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl5,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL5, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Dynamic_p2TxRateControl6,
+          F_AP | F_READ | F_WRITE,
+          HFA384x_RID_TXRATECNTL6, 0, 0,
+          prism2mib_uint32 },
+
+    /* p2Behavior MIB's */
+
+    { DIDmib_p2_p2Behavior_p2TickTime,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_ITICKTIME, 0, 0,
+          prism2mib_uint32 },
+
+    /* p2NIC MIB's */
+
+    { DIDmib_p2_p2NIC_p2MaxLoadTime,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_MAXLOADTIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2NIC_p2DLBufferPage,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_DOWNLOADBUFFER, HFA384x_RID_DOWNLOADBUFFER_LEN, 0,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2NIC_p2DLBufferOffset,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_DOWNLOADBUFFER, HFA384x_RID_DOWNLOADBUFFER_LEN, 1,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2NIC_p2DLBufferLength,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_DOWNLOADBUFFER, HFA384x_RID_DOWNLOADBUFFER_LEN, 2,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2NIC_p2PRIIdentity,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PRIIDENTITY, HFA384x_RID_PRIIDENTITY_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2PRISupRange,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PRISUPRANGE, HFA384x_RID_PRISUPRANGE_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2CFIActRanges,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PRI_CFIACTRANGES, HFA384x_RID_CFIACTRANGES_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2BuildSequence,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_BUILDSEQ, HFA384x_RID_BUILDSEQ_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2PrimaryFWID,
+          F_AP | F_STA | F_READ,
+          0, 0, 0,
+          prism2mib_fwid },
+    { DIDmib_p2_p2NIC_p2SecondaryFWID,
+          F_AP | F_STA | F_READ,
+          0, 0, 0,
+          prism2mib_fwid },
+    { DIDmib_p2_p2NIC_p2TertiaryFWID,
+          F_AP | F_READ,
+          0, 0, 0,
+          prism2mib_fwid },
+    { DIDmib_p2_p2NIC_p2NICSerialNumber,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_NICSERIALNUMBER, HFA384x_RID_NICSERIALNUMBER_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2NIC_p2NICIdentity,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_NICIDENTITY, HFA384x_RID_NICIDENTITY_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2MFISupRange,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_MFISUPRANGE, HFA384x_RID_MFISUPRANGE_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2CFISupRange,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CFISUPRANGE, HFA384x_RID_CFISUPRANGE_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2ChannelList,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CHANNELLIST, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2NIC_p2RegulatoryDomains,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_REGULATORYDOMAINS, HFA384x_RID_REGULATORYDOMAINS_LEN, 0,
+          prism2mib_regulatorydomains },
+    { DIDmib_p2_p2NIC_p2TempType,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_TEMPTYPE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2NIC_p2STAIdentity,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_STAIDENTITY, HFA384x_RID_STAIDENTITY_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2STASupRange,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_STASUPRANGE, HFA384x_RID_STASUPRANGE_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2MFIActRanges,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_STA_MFIACTRANGES, HFA384x_RID_MFIACTRANGES_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2NIC_p2STACFIActRanges,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_STA_CFIACTRANGES, HFA384x_RID_CFIACTRANGES2_LEN, 0,
+          prism2mib_uint32array },
+
+    /* p2MAC MIB's */
+
+    { DIDmib_p2_p2MAC_p2PortStatus,
+          F_STA | F_READ,
+          HFA384x_RID_PORTSTATUS, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentSSID,
+          F_STA | F_READ,
+          HFA384x_RID_CURRENTSSID, HFA384x_RID_CURRENTSSID_LEN, 0,
+          prism2mib_bytestr2pstr },
+    { DIDmib_p2_p2MAC_p2CurrentBSSID,
+          F_STA | F_READ,
+          HFA384x_RID_CURRENTBSSID, HFA384x_RID_CURRENTBSSID_LEN, 0,
+          prism2mib_bytearea2pstr },
+    { DIDmib_p2_p2MAC_p2CommsQuality,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2MAC_p2CommsQualityCQ,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 0,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2MAC_p2CommsQualityASL,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 1,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2MAC_p2CommsQualityANL,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 2,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2MAC_p2dbmCommsQuality,
+          F_STA | F_READ,
+          HFA384x_RID_DBMCOMMSQUALITY, HFA384x_RID_DBMCOMMSQUALITY_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2MAC_p2dbmCommsQualityCQ,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 0,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2MAC_p2dbmCommsQualityASL,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 1,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2MAC_p2dbmCommsQualityANL,
+          F_STA | F_READ,
+          HFA384x_RID_COMMSQUALITY, HFA384x_RID_COMMSQUALITY_LEN, 2,
+          prism2mib_uint32offset },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate,
+          F_STA | F_READ,
+          HFA384x_RID_CURRENTTXRATE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentBeaconInterval,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CURRENTBCNINT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2StaCurrentScaleThresholds,
+          F_STA | F_READ,
+          HFA384x_RID_CURRENTSCALETHRESH, HFA384x_RID_STACURSCALETHRESH_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2MAC_p2APCurrentScaleThresholds,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTSCALETHRESH, HFA384x_RID_APCURSCALETHRESH_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2MAC_p2ProtocolRspTime,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PROTOCOLRSPTIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2ShortRetryLimit,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_SHORTRETRYLIMIT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2LongRetryLimit,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_LONGRETRYLIMIT, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2MaxTransmitLifetime,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_MAXTXLIFETIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2MaxReceiveLifetime,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_MAXRXLIFETIME, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CFPollable,
+          F_STA | F_READ,
+          HFA384x_RID_CFPOLLABLE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2AuthenticationAlgorithms,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_AUTHALGORITHMS, HFA384x_RID_AUTHALGORITHMS_LEN, 0,
+          prism2mib_uint32array },
+    { DIDmib_p2_p2MAC_p2PrivacyOptionImplemented,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PRIVACYOPTIMP, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate1,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTTXRATE1, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate2,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTTXRATE2, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate3,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTTXRATE3, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate4,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTTXRATE4, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate5,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTTXRATE5, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2CurrentTxRate6,
+          F_AP | F_READ,
+          HFA384x_RID_CURRENTTXRATE6, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2MAC_p2OwnMACAddress,
+          F_AP | F_READ,
+          HFA384x_RID_OWNMACADDRESS, HFA384x_RID_OWNMACADDRESS_LEN, 0,
+          prism2mib_bytearea2pstr },
+
+    /* p2Modem MIB's */
+
+    { DIDmib_p2_p2Modem_p2PHYType,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_PHYTYPE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Modem_p2CurrentChannel,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CURRENTCHANNEL, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Modem_p2CurrentPowerState,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CURRENTPOWERSTATE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Modem_p2CCAMode,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_CCAMODE, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Modem_p2TxPowerMax,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_TXPOWERMAX, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel,
+          F_AP | F_STA | F_READ | F_WRITE,
+          HFA384x_RID_TXPOWERMAX, 0, 0,
+          prism2mib_uint32 },
+    { DIDmib_p2_p2Modem_p2SupportedDataRates,
+          F_AP | F_STA | F_READ,
+          HFA384x_RID_SUPPORTEDDATARATES, HFA384x_RID_SUPPORTEDDATARATES_LEN, 0,
+          prism2mib_bytestr2pstr },
+
+    /* And finally, lnx mibs */
+    { DIDmib_lnx_lnxConfigTable_lnxRSNAIE,
+          F_STA | F_READ | F_WRITE,
+          HFA384x_RID_CNFWPADATA, 0, 0,
+          prism2mib_priv },
+    { 0, 0, 0, 0, 0, NULL}};
+
+/*----------------------------------------------------------------
+These MIB's are not supported at this time:
+
+DIDmib_dot11phy_dot11PhyOperationTable_dot11ChannelAgilityPresent
+DIDmib_dot11phy_dot11PhyOperationTable_dot11ChannelAgilityEnabled
+DIDmib_dot11phy_dot11PhyDSSSTable_dot11PBCCOptionImplemented
+DIDmib_dot11phy_dot11RegDomainsSupportedTable_dot11RegDomainsSupportIndex
+DIDmib_dot11phy_dot11SupportedDataRatesTxTable_dot11SupportedDataRatesTxIndex
+DIDmib_dot11phy_dot11SupportedDataRatesTxTable_dot11SupportedDataRatesTxValue
+DIDmib_dot11phy_dot11SupportedDataRatesRxTable_dot11SupportedDataRatesRxIndex
+DIDmib_dot11phy_dot11SupportedDataRatesRxTable_dot11SupportedDataRatesRxValue
+
+DIDmib_dot11phy_dot11RegDomainsSupportedTable_dot11RegDomainsSupportValue
+TODO: need to investigate why wlan has this as enumerated and Prism2 has this
+      as btye str.
+
+DIDmib_dot11phy_dot11PhyDSSSTable_dot11ShortPreambleOptionImplemented
+TODO: Find out the firmware version number(s) for identifying
+      whether the firmware is capable of short preamble. TRUE or FALSE
+      will be returned based on the version of the firmware.
+
+WEP Key mappings aren't supported in the f/w.
+DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingIndex
+DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingAddress
+DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingWEPOn
+DIDmib_dot11smt_dot11WEPKeyMappingsTable_dot11WEPKeyMappingValue
+DIDmib_dot11smt_dot11PrivacyTable_dot11WEPKeyMappingLength
+
+TODO: implement counters.
+DIDmib_dot11smt_dot11PrivacyTable_dot11WEPICVErrorCount
+DIDmib_dot11smt_dot11PrivacyTable_dot11WEPExcludedCount
+DIDmib_dot11mac_dot11CountersTable_dot11TransmittedFragmentCount
+DIDmib_dot11mac_dot11CountersTable_dot11MulticastTransmittedFrameCount
+DIDmib_dot11mac_dot11CountersTable_dot11FailedCount
+DIDmib_dot11mac_dot11CountersTable_dot11RetryCount
+DIDmib_dot11mac_dot11CountersTable_dot11MultipleRetryCount
+DIDmib_dot11mac_dot11CountersTable_dot11FrameDuplicateCount
+DIDmib_dot11mac_dot11CountersTable_dot11RTSSuccessCount
+DIDmib_dot11mac_dot11CountersTable_dot11RTSFailureCount
+DIDmib_dot11mac_dot11CountersTable_dot11ACKFailureCount
+DIDmib_dot11mac_dot11CountersTable_dot11ReceivedFragmentCount
+DIDmib_dot11mac_dot11CountersTable_dot11MulticastReceivedFrameCount
+DIDmib_dot11mac_dot11CountersTable_dot11FCSErrorCount
+DIDmib_dot11mac_dot11CountersTable_dot11TransmittedFrameCount
+DIDmib_dot11mac_dot11CountersTable_dot11WEPUndecryptableCount
+
+TODO: implement sane values for these.
+DIDmib_dot11mac_dot11OperationTable_dot11ManufacturerID
+DIDmib_dot11mac_dot11OperationTable_dot11ProductID
+
+Not too worried about these at the moment.
+DIDmib_dot11phy_dot11PhyAntennaTable_dot11CurrentTxAntenna
+DIDmib_dot11phy_dot11PhyAntennaTable_dot11DiversitySupport
+DIDmib_dot11phy_dot11PhyAntennaTable_dot11CurrentRxAntenna
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11NumberSupportedPowerLevels
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel1
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel2
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel3
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel4
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel5
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel6
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel7
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11TxPowerLevel8
+DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel
+
+Ummm, FH and IR don't apply
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11HopTime
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentChannelNumber
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11MaxDwellTime
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentDwellTime
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentSet
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentPattern
+DIDmib_dot11phy_dot11PhyFHSSTable_dot11CurrentIndex
+DIDmib_dot11phy_dot11PhyDSSSTable_dot11CCAModeSupported
+DIDmib_dot11phy_dot11PhyDSSSTable_dot11EDThreshold
+DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogTimerMax
+DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogCountMax
+DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogTimerMin
+DIDmib_dot11phy_dot11PhyIRTable_dot11CCAWatchdogCountMin
+
+We just don't have enough antennas right now to worry about this.
+DIDmib_dot11phy_dot11AntennasListTable_dot11AntennaListIndex
+DIDmib_dot11phy_dot11AntennasListTable_dot11SupportedTxAntenna
+DIDmib_dot11phy_dot11AntennasListTable_dot11SupportedRxAntenna
+DIDmib_dot11phy_dot11AntennasListTable_dot11DiversitySelectionRx
+
+------------------------------------------------------------------*/
+
+/*================================================================*/
+/* Function Definitions */
+
+/*----------------------------------------------------------------
+* prism2mgmt_mibset_mibget
+*
+* Set the value of a mib item.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+*	0	success and done
+*	<0	success, but we're waiting for something to finish.
+*	>0	an error occurred while handling the message.
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+
+int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp)
+{
+	hfa384x_t		*hw = wlandev->priv;
+	int			result, isget;
+	mibrec_t		*mib;
+	UINT16			which;
+
+	p80211msg_dot11req_mibset_t	*msg = msgp;
+	p80211itemd_t			*mibitem;
+
+	DBFENTER;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	/*
+	** Determine if this is an Access Point or a station.
+	*/
+
+	which = hw->ap ? F_AP : F_STA;
+
+	/*
+	** Find the MIB in the MIB table.  Note that a MIB may be in the
+	** table twice...once for an AP and once for a station.  Make sure
+	** to get the correct one.  Note that DID=0 marks the end of the
+	** MIB table.
+	*/
+
+	mibitem = (p80211itemd_t *) msg->mibattribute.data;
+
+	for (mib = mibtab; mib->did != 0; mib++)
+		if (mib->did == mibitem->did && (mib->flag & which))
+			break;
+
+	if (mib->did == 0) {
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto done;
+	}
+
+	/*
+	** Determine if this is a "mibget" or a "mibset".  If this is a
+	** "mibget", then make sure that the MIB may be read.  Otherwise,
+	** this is a "mibset" so make make sure that the MIB may be written.
+	*/
+
+	isget = (msg->msgcode == DIDmsg_dot11req_mibget);
+
+	if (isget) {
+		if (!(mib->flag & F_READ)) {
+			msg->resultcode.data =
+				P80211ENUM_resultcode_cant_get_writeonly_mib;
+			goto done;
+		}
+	} else {
+		if (!(mib->flag & F_WRITE)) {
+			msg->resultcode.data =
+				P80211ENUM_resultcode_cant_set_readonly_mib;
+			goto done;
+		}
+	}
+
+	/*
+	** Execute the MIB function.  If things worked okay, then make
+	** sure that the MIB function also worked okay.  If so, and this
+	** is a "mibget", then the status value must be set for both the
+	** "mibattribute" parameter and the mib item within the data
+	** portion of the "mibattribute".
+	*/
+
+	result = mib->func(mib, isget, wlandev, hw, msg,
+			   (void *) mibitem->data);
+
+	if (msg->resultcode.data == P80211ENUM_resultcode_success) {
+		if (result != 0) {
+			WLAN_LOG_DEBUG(1, "get/set failure, result=%d\n",
+					result);
+			msg->resultcode.data =
+				 P80211ENUM_resultcode_implementation_failure;
+		} else {
+			if (isget) {
+				msg->mibattribute.status =
+					P80211ENUM_msgitem_status_data_ok;
+				mibitem->status =
+					P80211ENUM_msgitem_status_data_ok;
+			}
+		}
+	}
+
+done:
+	DBFEXIT;
+
+	return(0);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_bytestr2pstr
+*
+* Get/set pstr data to/from a byte string.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Number of bytes of RID data.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_bytestr2pstr(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int                result;
+	p80211pstrd_t      *pstr = (p80211pstrd_t*) data;
+	UINT8              bytebuf[MIB_TMP_MAXLEN];
+	hfa384x_bytestr_t  *p2bytestr = (hfa384x_bytestr_t*) bytebuf;
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig(hw, mib->parm1, bytebuf, mib->parm2);
+		prism2mgmt_bytestr2pstr(p2bytestr, pstr);
+	} else {
+		memset(bytebuf, 0, mib->parm2);
+		prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+		result = hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, mib->parm2);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_bytearea2pstr
+*
+* Get/set pstr data to/from a byte area.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Number of bytes of RID data.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_bytearea2pstr(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int            result;
+	p80211pstrd_t  *pstr = (p80211pstrd_t*) data;
+	UINT8          bytebuf[MIB_TMP_MAXLEN];
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig(hw, mib->parm1, bytebuf, mib->parm2);
+		prism2mgmt_bytearea2pstr(bytebuf, pstr,	mib->parm2);
+	} else {
+		memset(bytebuf, 0, mib->parm2);
+		prism2mgmt_pstr2bytearea(bytebuf, pstr);
+		result = hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, mib->parm2);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_uint32
+*
+* Get/set uint32 data.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_uint32(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf);
+		*uint32 = *wordbuf;
+		/* [MSM] Removed, getconfig16 returns the value in host order.
+		 * prism2mgmt_prism2int2p80211int(wordbuf, uint32);
+		 */
+	} else {
+		/* [MSM] Removed, setconfig16 expects host order.
+		 * prism2mgmt_p80211int2prism2int(wordbuf, uint32);
+		 */
+		*wordbuf = *uint32;
+		result = hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_uint32array
+*
+* Get/set an array of uint32 data.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Number of bytes of RID data.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_uint32array(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32 *) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+	int     i, cnt;
+
+	DBFENTER;
+
+	cnt = mib->parm2 / sizeof(UINT16);
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig(hw, mib->parm1, wordbuf, mib->parm2);
+		for (i = 0; i < cnt; i++)
+			prism2mgmt_prism2int2p80211int(wordbuf+i, uint32+i);
+	} else {
+		for (i = 0; i < cnt; i++)
+			prism2mgmt_p80211int2prism2int(wordbuf+i, uint32+i);
+		result = hfa384x_drvr_setconfig(hw, mib->parm1, wordbuf, mib->parm2);
+		}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_uint32offset
+*
+* Get/set a single element in an array of uint32 data.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Number of bytes of RID data.
+*       parm3    Element index.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_uint32offset(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+	UINT16  cnt;
+
+	DBFENTER;
+
+	cnt = mib->parm2 / sizeof(UINT16);
+
+	result = hfa384x_drvr_getconfig(hw, mib->parm1, wordbuf, mib->parm2);
+	if (result == 0) {
+		if (isget) {
+			if (mib->parm3 < cnt)
+				prism2mgmt_prism2int2p80211int(wordbuf+mib->parm3, uint32);
+			else
+				*uint32 = 0;
+		} else {
+			if (mib->parm3 < cnt) {
+				prism2mgmt_p80211int2prism2int(wordbuf+mib->parm3, uint32);
+				result = hfa384x_drvr_setconfig(hw, mib->parm1, wordbuf, mib->parm2);
+			}
+		}
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_truth
+*
+* Get/set truth data.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_truth(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf);
+		*uint32 = (*wordbuf) ?
+				P80211ENUM_truth_true : P80211ENUM_truth_false;
+	} else {
+		*wordbuf = ((*uint32) == P80211ENUM_truth_true) ? 1 : 0;
+		result = hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_flag
+*
+* Get/set a flag.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Bit to get/set.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_flag(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+	UINT32  flags;
+
+	DBFENTER;
+
+	result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf);
+	if (result == 0) {
+		/* [MSM] Removed, getconfig16 returns the value in host order.
+		 * prism2mgmt_prism2int2p80211int(wordbuf, &flags);
+		 */
+		flags = *wordbuf;
+		if (isget) {
+			*uint32 = (flags & mib->parm2) ?
+				P80211ENUM_truth_true : P80211ENUM_truth_false;
+		} else {
+			if ((*uint32) == P80211ENUM_truth_true)
+				flags |= mib->parm2;
+			else
+				flags &= ~mib->parm2;
+			/* [MSM] Removed, setconfig16 expects host order.
+			 * prism2mgmt_p80211int2prism2int(wordbuf, &flags);
+			 */
+			*wordbuf = flags;
+			result = hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf);
+		}
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_appcfinfoflag
+*
+* Get/set a single flag in the APPCFINFO record.
+*
+* MIB record parameters:
+*       parm1    Bit to get/set.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_appcfinfoflag(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+	UINT16  word;
+
+	DBFENTER;
+
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFAPPCFINFO,
+					bytebuf, HFA384x_RID_CNFAPPCFINFO_LEN);
+	if (result == 0) {
+		if (isget) {
+			*uint32 = (hfa384x2host_16(wordbuf[3]) & mib->parm1) ?
+				P80211ENUM_truth_true : P80211ENUM_truth_false;
+		} else {
+			word = hfa384x2host_16(wordbuf[3]);
+			word = ((*uint32) == P80211ENUM_truth_true) ?
+				(word | mib->parm1) : (word & ~mib->parm1);
+			wordbuf[3] = host2hfa384x_16(word);
+			result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFAPPCFINFO,
+					bytebuf, HFA384x_RID_CNFAPPCFINFO_LEN);
+		}
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_regulatorydomains
+*
+* Get regulatory domain data.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Number of bytes of RID data.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_regulatorydomains(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int            result;
+	UINT32         cnt;
+	p80211pstrd_t  *pstr = (p80211pstrd_t*) data;
+	UINT8          bytebuf[MIB_TMP_MAXLEN];
+	UINT16         *wordbuf = (UINT16*) bytebuf;
+
+	DBFENTER;
+
+	result = 0;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig(hw, mib->parm1, wordbuf, mib->parm2);
+		prism2mgmt_prism2int2p80211int(wordbuf, &cnt);
+		pstr->len = (UINT8) cnt;
+		memcpy(pstr->data, &wordbuf[1], pstr->len);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_wepdefaultkey
+*
+* Get/set WEP default keys.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Number of bytes of RID data.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_wepdefaultkey(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int            result;
+	p80211pstrd_t  *pstr = (p80211pstrd_t*) data;
+	UINT8          bytebuf[MIB_TMP_MAXLEN];
+	UINT16         len;
+
+	DBFENTER;
+
+	if (isget) {
+		result = 0;    /* Should never happen. */
+	} else {
+		len = (pstr->len > 5) ? HFA384x_RID_CNFWEP128DEFAULTKEY_LEN :
+					HFA384x_RID_CNFWEPDEFAULTKEY_LEN;
+		memset(bytebuf, 0, len);
+		prism2mgmt_pstr2bytearea(bytebuf, pstr);
+		result = hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, len);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_powermanagement
+*
+* Get/set 802.11 power management value.  Note that this is defined differently
+* by 802.11 and Prism2:
+*
+*       Meaning     802.11       Prism2
+*        active       1           false
+*      powersave      2           true
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_powermanagement(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT32  value;
+
+	DBFENTER;
+
+	if (isget) {
+		result = prism2mib_uint32(mib, isget, wlandev, hw, msg, &value);
+		*uint32 = (value == 0) ? 1 : 2;
+	} else {
+		value = ((*uint32) == 1) ? 0 : 1;
+		result = prism2mib_uint32(mib, isget, wlandev, hw, msg, &value);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_preamble
+*
+* Get/set Prism2 short preamble
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_preamble(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+	UINT8   bytebuf[MIB_TMP_MAXLEN];
+	UINT16  *wordbuf = (UINT16*) bytebuf;
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf);
+		*uint32 = *wordbuf;
+	} else {
+		*wordbuf = *uint32;
+		result = hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_privacyinvoked
+*
+* Get/set the dot11PrivacyInvoked value.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Bit value for PrivacyInvoked flag.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_privacyinvoked(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+
+	DBFENTER;
+
+	if (wlandev->hostwep & HOSTWEP_DECRYPT) {
+		if (wlandev->hostwep & HOSTWEP_DECRYPT)
+			mib->parm2 |= HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
+		if (wlandev->hostwep & HOSTWEP_ENCRYPT)
+			mib->parm2 |= HFA384x_WEPFLAGS_DISABLE_TXCRYPT;
+	}
+
+	result = prism2mib_flag(mib, isget, wlandev, hw, msg, data);
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_excludeunencrypted
+*
+* Get/set the dot11ExcludeUnencrypted value.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Bit value for ExcludeUnencrypted flag.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_excludeunencrypted(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+
+	DBFENTER;
+
+	result = prism2mib_flag(mib, isget, wlandev, hw, msg, data);
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_fragmentationthreshold
+*
+* Get/set the fragmentation threshold.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_fragmentationthreshold(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+
+	DBFENTER;
+
+	if (!isget)
+		if ((*uint32) % 2) {
+			WLAN_LOG_WARNING("Attempt to set odd number "
+					  "FragmentationThreshold\n");
+			msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+			return(0);
+		}
+
+	result = prism2mib_uint32(mib, isget, wlandev, hw, msg, data);
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_operationalrateset
+*
+* Get/set the operational rate set.
+*
+* MIB record parameters:
+*       parm1    Prism2 RID value.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_operationalrateset(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int            result;
+	p80211pstrd_t  *pstr = (p80211pstrd_t *) data;
+	UINT8          bytebuf[MIB_TMP_MAXLEN];
+	UINT16         *wordbuf = (UINT16*) bytebuf;
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig16(hw, mib->parm1, wordbuf);
+		prism2mgmt_get_oprateset(wordbuf, pstr);
+	} else {
+		prism2mgmt_set_oprateset(wordbuf, pstr);
+		result = hfa384x_drvr_setconfig16(hw, mib->parm1, *wordbuf);
+		result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, *wordbuf);
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_groupaddress
+*
+* Get/set the dot11GroupAddressesTable.
+*
+* MIB record parameters:
+*       parm1    Not used.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_groupaddress(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int            result;
+	p80211pstrd_t  *pstr = (p80211pstrd_t *) data;
+	UINT8          bytebuf[MIB_TMP_MAXLEN];
+	UINT16         len;
+
+	DBFENTER;
+
+	/* TODO: fix this.  f/w doesn't support mcast filters */
+
+	if (isget) {
+		prism2mgmt_get_grpaddr(mib->did, pstr, hw);
+		return(0);
+	}
+
+	result = prism2mgmt_set_grpaddr(mib->did, bytebuf, pstr, hw);
+	if (result != 0) {
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		return(result);
+	}
+
+	if (hw->dot11_grpcnt <= MAX_PRISM2_GRP_ADDR) {
+		len = hw->dot11_grpcnt * WLAN_ADDR_LEN;
+		memcpy(bytebuf, hw->dot11_grp_addr[0], len);
+		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_GROUPADDR, bytebuf, len);
+
+		/*
+		** Turn off promiscuous mode if count is equal to MAX.  We may
+		** have been at a higher count in promiscuous mode and need to
+		** turn it off.
+		*/
+
+		/* but only if we're not already in promisc mode. :) */
+		if ((hw->dot11_grpcnt == MAX_PRISM2_GRP_ADDR) &&
+		    !( wlandev->netdev->flags & IFF_PROMISC)) {
+			result = hfa384x_drvr_setconfig16(hw,
+					     HFA384x_RID_PROMISCMODE, 0);
+		}
+	} else {
+
+		/*
+		** Clear group addresses in card and set to promiscuous mode.
+		*/
+
+		memset(bytebuf, 0, sizeof(bytebuf));
+		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_GROUPADDR,
+						bytebuf, 0);
+		if (result == 0) {
+			result = hfa384x_drvr_setconfig16(hw,
+					HFA384x_RID_PROMISCMODE, 1);
+		}
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_fwid
+*
+* Get the firmware ID.
+*
+* MIB record parameters:
+*       parm1    Not used.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_fwid(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int             result;
+	p80211pstrd_t   *pstr = (p80211pstrd_t *) data;
+	hfa384x_FWID_t  fwid;
+
+	DBFENTER;
+
+	if (isget) {
+		result = hfa384x_drvr_getconfig(hw, HFA384x_RID_FWID,
+						&fwid, HFA384x_RID_FWID_LEN);
+		if (mib->did == DIDmib_p2_p2NIC_p2PrimaryFWID) {
+			fwid.primary[HFA384x_FWID_LEN - 1] = '\0';
+			pstr->len = strlen(fwid.primary);
+			memcpy(pstr->data, fwid.primary, pstr->len);
+		} else {
+			fwid.secondary[HFA384x_FWID_LEN - 1] = '\0';
+			pstr->len = strlen(fwid.secondary);
+			memcpy(pstr->data, fwid.secondary, pstr->len);
+		}
+	} else
+		result = 0;     /* Should never happen. */
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_authalg
+*
+* Get values from the AuhtenticationAlgorithmsTable.
+*
+* MIB record parameters:
+*       parm1    Table index (1-6).
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_authalg(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	UINT32  *uint32 = (UINT32*) data;
+
+	DBFENTER;
+
+	/* MSM: pkx supplied code that  code queries RID FD4D....but the f/w's
+         *  results are bogus. Therefore, we have to simulate the appropriate
+         *  results here in the driver based on our knowledge of existing MAC
+         *  features.  That's the whole point behind this ugly function.
+         */
+
+	if (isget) {
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		switch (mib->parm1) {
+			case 1: /* Open System */
+				*uint32 = P80211ENUM_authalg_opensystem;
+				break;
+			case 2: /* SharedKey */
+				*uint32 = P80211ENUM_authalg_sharedkey;
+				break;
+			default:
+				*uint32 = 0;
+				msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+				break;
+		}
+	}
+
+	DBFEXIT;
+	return(0);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_authalgenable
+*
+* Get/set the enable values from the AuhtenticationAlgorithmsTable.
+*
+* MIB record parameters:
+*       parm1    Table index (1-6).
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_authalgenable(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	int     result;
+	UINT32  *uint32 = (UINT32*) data;
+
+	int     index;
+	UINT16  cnf_auth;
+	UINT16	mask;
+
+	DBFENTER;
+
+	index = mib->parm1 - 1;
+
+	result = hfa384x_drvr_getconfig16( hw,
+			HFA384x_RID_CNFAUTHENTICATION, &cnf_auth);
+	WLAN_LOG_DEBUG(2,"cnfAuthentication0=%d, index=%d\n", cnf_auth, index);
+
+	if (isget) {
+		if ( index == 0 || index == 1 ) {
+			*uint32 = (cnf_auth & (1<<index)) ?
+				P80211ENUM_truth_true: P80211ENUM_truth_false;
+		} else {
+			*uint32 = P80211ENUM_truth_false;
+			msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		}
+	} else {
+		if ( index == 0 || index == 1 ) {
+			mask = 1 << index;
+			if (*uint32==P80211ENUM_truth_true ) {
+				cnf_auth |= mask;
+			} else {
+				cnf_auth &= ~mask;
+			}
+			result = hfa384x_drvr_setconfig16( hw,
+					HFA384x_RID_CNFAUTHENTICATION, cnf_auth);
+			WLAN_LOG_DEBUG(2,"cnfAuthentication:=%d\n", cnf_auth);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,"Unable to set p2cnfAuthentication to %d\n", cnf_auth);
+				msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+			}
+		} else {
+			msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		}
+	}
+
+	DBFEXIT;
+	return(result);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_priv
+*
+* Get/set values in the "priv" data structure.
+*
+* MIB record parameters:
+*       parm1    Not used.
+*       parm2    Not used.
+*       parm3    Not used.
+*
+* Arguments:
+*       mib      MIB record.
+*       isget    MIBGET/MIBSET flag.
+*       wlandev  wlan device structure.
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       msg      Message structure.
+*       data     Data buffer.
+*
+* Returns:
+*       0   - Success.
+*       ~0  - Error.
+*
+----------------------------------------------------------------*/
+
+static int prism2mib_priv(
+mibrec_t                     *mib,
+int                          isget,
+wlandevice_t                 *wlandev,
+hfa384x_t                    *hw,
+p80211msg_dot11req_mibset_t  *msg,
+void                         *data)
+{
+	UINT32            *uint32 = (UINT32*) data;
+	p80211pstrd_t     *pstr = (p80211pstrd_t*) data;
+	p80211macarray_t  *macarray = (p80211macarray_t *) data;
+
+	int  i, cnt, result, done;
+
+	prism2sta_authlist_t  old;
+
+	/*
+	** "test" is a lot longer than necessary but who cares?  ...as long as
+	** it is long enough!
+	*/
+
+	UINT8  test[sizeof(wlandev->rx) + sizeof(hw->tallies)];
+
+	DBFENTER;
+
+	switch (mib->did) {
+	case DIDmib_p2_p2Table_p2ReceivedFrameStatistics:
+
+		/*
+		** Note: The values in this record are changed by the
+		** interrupt handler and therefore cannot be guaranteed
+		** to be stable while they are being copied.  However,
+		** the interrupt handler will take priority over this
+		** code.  Hence, if the same values are copied twice,
+		** then we are ensured that the values have not been
+		** changed.  If they have, then just try again.  Don't
+		** try more than 10 times...if we still haven't got it,
+		** then the values we do have are probably good enough.
+		** This scheme for copying values is used in order to
+		** prevent having to block the interrupt handler while
+		** we copy the values.
+		*/
+
+		if (isget)
+			for (i = 0; i < 10; i++) {
+				memcpy(data, &wlandev->rx, sizeof(wlandev->rx));
+				memcpy(test, &wlandev->rx, sizeof(wlandev->rx));
+				if (memcmp(data, test, sizeof(wlandev->rx)) == 0) break;
+			}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2CommunicationTallies:
+
+		/*
+		** Note: The values in this record are changed by the
+		** interrupt handler and therefore cannot be guaranteed
+		** to be stable while they are being copied.  See the
+		** note above about copying values.
+		*/
+
+		if (isget) {
+			result = hfa384x_drvr_commtallies(hw);
+
+			/* ?????? We need to wait a bit here for the */
+			/*   tallies to get updated. ?????? */
+			/* MSM: TODO: The right way to do this is to
+			 *      add a "commtallie" wait queue to the
+			 *      priv structure that gets run every time
+			 *      we receive a commtally info frame.
+			 *      This process would sleep on that
+			 *      queue and get awakened when the
+			 *      the requested info frame arrives.
+			 *      Don't have time to do and test this
+			 *      right now.
+			 */
+
+			/* Ugh, this is nasty. */
+			for (i = 0; i < 10; i++) {
+				memcpy(data,
+				       &hw->tallies,
+				       sizeof(hw->tallies));
+				memcpy(test,
+				       &hw->tallies,
+				       sizeof(hw->tallies));
+				if ( memcmp(data,
+					    test,
+					    sizeof(hw->tallies)) == 0)
+					break;
+			}
+		}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2Authenticated:
+
+		if (isget) {
+			prism2mib_priv_authlist(hw, &old);
+
+			macarray->cnt = 0;
+			for (i = 0; i < old.cnt; i++) {
+				if (!old.assoc[i]) {
+					memcpy(macarray->data[macarray->cnt], old.addr[i], WLAN_ADDR_LEN);
+					macarray->cnt++;
+				}
+			}
+		}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2Associated:
+
+		if (isget) {
+			prism2mib_priv_authlist(hw, &old);
+
+			macarray->cnt = 0;
+			for (i = 0; i < old.cnt; i++) {
+				if (old.assoc[i]) {
+					memcpy(macarray->data[macarray->cnt], old.addr[i], WLAN_ADDR_LEN);
+					macarray->cnt++;
+				}
+			}
+		}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2PowerSaveUserCount:
+
+		if (isget)
+			*uint32 = hw->psusercount;
+
+		break;
+
+	case DIDmib_p2_p2Table_p2Comment:
+
+		if (isget) {
+			pstr->len = strlen(hw->comment);
+			memcpy(pstr->data, hw->comment, pstr->len);
+		} else {
+			cnt = pstr->len;
+			if (cnt < 0) cnt = 0;
+			if (cnt >= sizeof(hw->comment))
+				cnt = sizeof(hw->comment)-1;
+			memcpy(hw->comment, pstr->data, cnt);
+			pstr->data[cnt] = '\0';
+		}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2AccessMode:
+
+		if (isget)
+			*uint32 = hw->accessmode;
+		else
+			prism2mib_priv_accessmode(hw, *uint32);
+
+		break;
+
+	case DIDmib_p2_p2Table_p2AccessAllow:
+
+		if (isget) {
+			macarray->cnt = hw->allow.cnt;
+			memcpy(macarray->data, hw->allow.addr,
+			       macarray->cnt*WLAN_ADDR_LEN);
+		} else {
+			prism2mib_priv_accessallow(hw, macarray);
+		}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2AccessDeny:
+
+		if (isget) {
+			macarray->cnt = hw->deny.cnt;
+			memcpy(macarray->data, hw->deny.addr,
+			       macarray->cnt*WLAN_ADDR_LEN);
+		} else {
+			prism2mib_priv_accessdeny(hw, macarray);
+		}
+
+		break;
+
+	case DIDmib_p2_p2Table_p2ChannelInfoResults:
+
+		if (isget) {
+			done = atomic_read(&hw->channel_info.done);
+			if (done == 0) {
+				msg->resultcode.status = P80211ENUM_msgitem_status_no_value;
+				break;
+			}
+			if (done == 1) {
+				msg->resultcode.status = P80211ENUM_msgitem_status_incomplete_itemdata;
+				break;
+			}
+
+			for (i = 0; i < 14; i++, uint32 += 5) {
+				uint32[0] = i+1;
+				uint32[1] = hw->channel_info.results.result[i].anl;
+				uint32[2] = hw->channel_info.results.result[i].pnl;
+				uint32[3] = (hw->channel_info.results.result[i].active & HFA384x_CHINFORESULT_BSSACTIVE) ? 1 : 0;
+				uint32[4] = (hw->channel_info.results.result[i].active & HFA384x_CHINFORESULT_PCFACTIVE) ? 1 : 0;
+			}
+		}
+
+		break;
+
+	case DIDmib_dot11smt_dot11StationConfigTable_dot11DesiredBSSType:
+
+		if (isget)
+			*uint32 = hw->dot11_desired_bss_type;
+		else
+			hw->dot11_desired_bss_type = *uint32;
+
+		break;
+
+	case DIDmib_lnx_lnxConfigTable_lnxRSNAIE: {
+		hfa384x_WPAData_t wpa;
+		if (isget) {
+			hfa384x_drvr_getconfig( hw, HFA384x_RID_CNFWPADATA,
+						(UINT8 *) &wpa, sizeof(wpa));
+			pstr->len = hfa384x2host_16(wpa.datalen);
+			memcpy(pstr->data, wpa.data, pstr->len);
+		} else {
+			wpa.datalen = host2hfa384x_16(pstr->len);
+			memcpy(wpa.data, pstr->data, pstr->len);
+
+			result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFWPADATA,
+				(UINT8 *) &wpa, sizeof(wpa));
+		}
+		break;
+	}
+	default:
+		WLAN_LOG_ERROR("Unhandled DID 0x%08x\n", mib->did);
+	}
+
+	DBFEXIT;
+	return(0);
+}
+
+/*----------------------------------------------------------------
+* prism2mib_priv_authlist
+*
+* Get a copy of the list of authenticated stations.
+*
+* Arguments:
+*       priv     "priv" structure.
+*       list     List of authenticated stations.
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+static void prism2mib_priv_authlist(
+hfa384x_t             *hw,
+prism2sta_authlist_t  *list)
+{
+	prism2sta_authlist_t  test;
+	int                   i;
+
+	DBFENTER;
+
+	/*
+	** Note: The values in this record are changed by the interrupt
+	** handler and therefore cannot be guaranteed to be stable while
+	** they are being copied.  However, the interrupt handler will
+	** take priority over this code.  Hence, if the same values are
+	** copied twice, then we are ensured that the values have not
+	** been changed.  If they have, then just try again.  Don't try
+	** more than 10 times...the list of authenticated stations is
+	** unlikely to be changing frequently enough that we can't get
+	** a snapshot in 10 tries.  Don't try more than this so that we
+	** don't risk locking-up for long periods of time.  If we still
+	** haven't got the snapshot, then generate an error message and
+	** return an empty list (since this is the only valid list that
+	** we can guarentee).  This scheme for copying values is used in
+	** order to prevent having to block the interrupt handler while
+	** we copy the values.
+	*/
+
+	for (i = 0; i < 10; i++) {
+		memcpy(list, &hw->authlist, sizeof(prism2sta_authlist_t));
+		memcpy(&test, &hw->authlist, sizeof(prism2sta_authlist_t));
+		if (memcmp(list, &test, sizeof(prism2sta_authlist_t)) == 0)
+			break;
+	}
+
+	if (i >= 10) {
+		list->cnt = 0;
+		WLAN_LOG_ERROR("Could not obtain snapshot of authenticated stations.\n");
+		}
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2mib_priv_accessmode
+*
+* Set the Access Mode.
+*
+* Arguments:
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       mode     New access mode.
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+static void prism2mib_priv_accessmode(
+hfa384x_t         *hw,
+UINT32            mode)
+{
+	prism2sta_authlist_t  old;
+	int                   i, j, deauth;
+	UINT8                 *addr;
+
+	DBFENTER;
+
+	/*
+	** If the mode is not changing or it is changing to "All", then it's
+	** okay to go ahead without a lot of messing around.  Otherwise, the
+	** access mode is changing in a way that may leave some stations
+	** authenticated which should not be authenticated.  It will be
+	** necessary to de-authenticate these stations.
+	*/
+
+	if (mode == WLAN_ACCESS_ALL || mode == hw->accessmode) {
+		hw->accessmode = mode;
+		return;
+	}
+
+	/*
+	** Switch to the new access mode.  Once this is done, then the interrupt
+	** handler (which uses this value) will be prevented from authenticating
+	** ADDITIONAL stations which should not be authenticated.  Then get a
+	** copy of the current list of authenticated stations.
+	*/
+
+	hw->accessmode = mode;
+
+	prism2mib_priv_authlist(hw, &old);
+
+	/*
+	** Now go through the list of previously authenticated stations (some
+	** of which might de-authenticate themselves while we are processing it
+	** but that is okay).  Any station which no longer matches the access
+	** mode, must be de-authenticated.
+	*/
+
+	for (i = 0; i < old.cnt; i++) {
+		addr = old.addr[i];
+
+		if (mode == WLAN_ACCESS_NONE)
+			deauth = 1;
+		else {
+			if (mode == WLAN_ACCESS_ALLOW) {
+				for (j = 0; j < hw->allow.cnt; j++)
+					if (memcmp(addr, hw->allow.addr[j],
+							WLAN_ADDR_LEN) == 0)
+						break;
+				deauth = (j >= hw->allow.cnt);
+			} else {
+				for (j = 0; j < hw->deny.cnt; j++)
+					if (memcmp(addr, hw->deny.addr[j],
+							WLAN_ADDR_LEN) == 0)
+						break;
+				deauth = (j < hw->deny.cnt);
+			}
+		}
+
+		if (deauth) prism2mib_priv_deauthenticate(hw, addr);
+	}
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2mib_priv_accessallow
+*
+* Change the list of allowed MAC addresses.
+*
+* Arguments:
+*       priv      "priv" structure.
+*       hw        "hw" structure.
+*       macarray  New array of MAC addresses.
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+static void prism2mib_priv_accessallow(
+hfa384x_t         *hw,
+p80211macarray_t  *macarray)
+{
+	prism2sta_authlist_t  old;
+	int                   i, j;
+
+	DBFENTER;
+
+	/*
+	** Change the access list.  Note that the interrupt handler may be in
+	** the middle of using the access list!!!  Since the interrupt handler
+	** will	always have priority over this process and this is the only
+	** process that will modify the list, this problem can be handled as
+	** follows:
+	**
+	**    1. Set the "modify" flag.
+	**    2. Change the first copy of the list.
+	**    3. Clear the "modify" flag.
+	**    4. Change the backup copy of the list.
+	**
+	** The interrupt handler will check the "modify" flag.  If NOT set, then
+	** the first copy of the list is valid and may be used.  Otherwise, the
+	** first copy is being changed but the backup copy is valid and may be
+	** used.  Doing things this way prevents having to have the interrupt
+	** handler block while the list is being updated.
+	*/
+
+	hw->allow.modify = 1;
+
+	hw->allow.cnt = macarray->cnt;
+	memcpy(hw->allow.addr, macarray->data, macarray->cnt*WLAN_ADDR_LEN);
+
+	hw->allow.modify = 0;
+
+	hw->allow.cnt1 = macarray->cnt;
+	memcpy(hw->allow.addr1, macarray->data, macarray->cnt*WLAN_ADDR_LEN);
+
+	/*
+	** If the current access mode is "Allow", then changing the access
+	** list may leave some stations authenticated which should not be
+	** authenticated.  It will be necessary to de-authenticate these
+	** stations.  Otherwise, the list can be changed without a lot of fuss.
+	*/
+
+	if (hw->accessmode == WLAN_ACCESS_ALLOW) {
+
+		/*
+		** Go through the list of authenticated stations (some of
+		** which might de-authenticate themselves while we are
+		** processing it but that is okay).  Any station which is
+		** no longer in the list of allowed stations, must be
+		** de-authenticated.
+		*/
+
+		prism2mib_priv_authlist(hw, &old);
+
+		for (i = 0; i < old.cnt; i++) {
+			for (j = 0; j < hw->allow.cnt; j++)
+				if (memcmp(old.addr[i], hw->allow.addr[j],
+							WLAN_ADDR_LEN) == 0)
+					break;
+			if (j >= hw->allow.cnt)
+				prism2mib_priv_deauthenticate(hw, old.addr[i]);
+		}
+	}
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2mib_priv_accessdeny
+*
+* Change the list of denied MAC addresses.
+*
+* Arguments:
+*       priv      "priv" structure.
+*       hw        "hw" structure.
+*       macarray  New array of MAC addresses.
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+static void prism2mib_priv_accessdeny(
+hfa384x_t         *hw,
+p80211macarray_t  *macarray)
+{
+	prism2sta_authlist_t  old;
+	int                   i, j;
+
+	DBFENTER;
+
+	/*
+	** Change the access list.  Note that the interrupt handler may be in
+	** the middle of using the access list!!!  Since the interrupt handler
+	** will always have priority over this process and this is the only
+	** process that will modify the list, this problem can be handled as
+	** follows:
+	**
+	**    1. Set the "modify" flag.
+	**    2. Change the first copy of the list.
+	**    3. Clear the "modify" flag.
+	**    4. Change the backup copy of the list.
+	**
+	** The interrupt handler will check the "modify" flag.  If NOT set, then
+	** the first copy of the list is valid and may be used.  Otherwise, the
+	** first copy is being changed but the backup copy is valid and may be
+	** used.  Doing things this way prevents having to have the interrupt
+	** handler block while the list is being updated.
+	*/
+
+	hw->deny.modify = 1;
+
+	hw->deny.cnt = macarray->cnt;
+	memcpy(hw->deny.addr, macarray->data, macarray->cnt*WLAN_ADDR_LEN);
+
+	hw->deny.modify = 0;
+
+	hw->deny.cnt1 = macarray->cnt;
+	memcpy(hw->deny.addr1, macarray->data, macarray->cnt*WLAN_ADDR_LEN);
+
+	/*
+	** If the current access mode is "Deny", then changing the access
+	** list may leave some stations authenticated which should not be
+	** authenticated.  It will be necessary to de-authenticate these
+	** stations.  Otherwise, the list can be changed without a lot of fuss.
+	*/
+
+	if (hw->accessmode == WLAN_ACCESS_DENY) {
+
+		/*
+		** Go through the list of authenticated stations (some of
+		** which might de-authenticate themselves while we are
+		** processing it but that is okay).  Any station which is
+		** now in the list of denied stations, must be de-authenticated.
+		*/
+
+		prism2mib_priv_authlist(hw, &old);
+
+		for (i = 0; i < old.cnt; i++)
+			for (j = 0; j < hw->deny.cnt; j++)
+				if (memcmp(old.addr[i], hw->deny.addr[j],
+							 WLAN_ADDR_LEN) == 0) {
+					prism2mib_priv_deauthenticate(hw, old.addr[i]);
+					break;
+				}
+	}
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2mib_priv_deauthenticate
+*
+* De-authenticate a station.  This is done by sending a HandoverAddress
+* information frame to the firmware.  This should work, according to
+* Intersil.
+*
+* Arguments:
+*       priv     "priv" structure.
+*       hw       "hw" structure.
+*       addr     MAC address of station to be de-authenticated.
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+static void prism2mib_priv_deauthenticate(
+hfa384x_t         *hw,
+UINT8             *addr)
+{
+	DBFENTER;
+	hfa384x_drvr_handover(hw, addr);
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_pstr2bytestr
+*
+* Convert the pstr data in the WLAN message structure into an hfa384x
+* byte string format.
+*
+* Arguments:
+*	bytestr		hfa384x byte string data type
+*	pstr		wlan message data
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+void prism2mgmt_pstr2bytestr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr)
+{
+	DBFENTER;
+
+	bytestr->len = host2hfa384x_16((UINT16)(pstr->len));
+	memcpy(bytestr->data, pstr->data, pstr->len);
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_pstr2bytearea
+*
+* Convert the pstr data in the WLAN message structure into an hfa384x
+* byte area format.
+*
+* Arguments:
+*	bytearea	hfa384x byte area data type
+*	pstr		wlan message data
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+void prism2mgmt_pstr2bytearea(UINT8 *bytearea, p80211pstrd_t *pstr)
+{
+	DBFENTER;
+
+	memcpy(bytearea, pstr->data, pstr->len);
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_bytestr2pstr
+*
+* Convert the data in an hfa384x byte string format into a
+* pstr in the WLAN message.
+*
+* Arguments:
+*	bytestr		hfa384x byte string data type
+*	msg		wlan message
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+void prism2mgmt_bytestr2pstr(hfa384x_bytestr_t *bytestr, p80211pstrd_t *pstr)
+{
+	DBFENTER;
+
+	pstr->len = (UINT8)(hfa384x2host_16((UINT16)(bytestr->len)));
+	memcpy(pstr->data, bytestr->data, pstr->len);
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_bytearea2pstr
+*
+* Convert the data in an hfa384x byte area format into a pstr
+* in the WLAN message.
+*
+* Arguments:
+*	bytearea	hfa384x byte area data type
+*	msg		wlan message
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+void prism2mgmt_bytearea2pstr(UINT8 *bytearea, p80211pstrd_t *pstr, int len)
+{
+	DBFENTER;
+
+	pstr->len = (UINT8)len;
+	memcpy(pstr->data, bytearea, len);
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_prism2int2p80211int
+*
+* Convert an hfa384x integer into a wlan integer
+*
+* Arguments:
+*	prism2enum	pointer to hfa384x integer
+*	wlanenum	pointer to p80211 integer
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+void prism2mgmt_prism2int2p80211int(UINT16 *prism2int, UINT32 *wlanint)
+{
+	DBFENTER;
+
+	*wlanint = (UINT32)hfa384x2host_16(*prism2int);
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_p80211int2prism2int
+*
+* Convert a wlan integer into an hfa384x integer
+*
+* Arguments:
+*	prism2enum	pointer to hfa384x integer
+*	wlanenum	pointer to p80211 integer
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+
+void prism2mgmt_p80211int2prism2int(UINT16 *prism2int, UINT32 *wlanint)
+{
+	DBFENTER;
+
+	*prism2int = host2hfa384x_16((UINT16)(*wlanint));
+	DBFEXIT;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_prism2enum2p80211enum
+*
+* Convert the hfa384x enumerated int into a p80211 enumerated int
+*
+* Arguments:
+*	prism2enum	pointer to hfa384x integer
+*	wlanenum	pointer to p80211 integer
+*	rid		hfa384x record id
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+void prism2mgmt_prism2enum2p80211enum(UINT16 *prism2enum, UINT32 *wlanenum, UINT16 rid)
+{
+	DBFENTER;
+
+	/* At the moment, the need for this functionality hasn't
+	presented itself. All the wlan enumerated values are
+	a 1-to-1 match against the Prism2 enumerated values*/
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_p80211enum2prism2enum
+*
+* Convert the p80211 enumerated int into an hfa384x enumerated int
+*
+* Arguments:
+*	prism2enum	pointer to hfa384x integer
+*	wlanenum	pointer to p80211 integer
+*	rid		hfa384x record id
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+void prism2mgmt_p80211enum2prism2enum(UINT16 *prism2enum, UINT32 *wlanenum, UINT16 rid)
+{
+	DBFENTER;
+
+	/* At the moment, the need for this functionality hasn't
+	presented itself. All the wlan enumerated values are
+	a 1-to-1 match against the Prism2 enumerated values*/
+	DBFEXIT;
+	return;
+}
+
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_get_oprateset
+*
+* Convert the hfa384x bit area into a wlan octet string.
+*
+* Arguments:
+*	rate		Prism2 bit area
+*	pstr		wlan octet string
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+void prism2mgmt_get_oprateset(UINT16 *rate, p80211pstrd_t *pstr)
+{
+	UINT8	len;
+	UINT8	*datarate;
+
+	DBFENTER;
+
+	len = 0;
+	datarate = pstr->data;
+
+ 	/* 1 Mbps */
+	if ( BIT0 & (*rate) ) {
+		len += (UINT8)1;
+		*datarate = (UINT8)2;
+		datarate++;
+	}
+
+ 	/* 2 Mbps */
+	if ( BIT1 & (*rate) ) {
+		len += (UINT8)1;
+		*datarate = (UINT8)4;
+		datarate++;
+	}
+
+ 	/* 5.5 Mbps */
+	if ( BIT2 & (*rate) ) {
+		len += (UINT8)1;
+		*datarate = (UINT8)11;
+		datarate++;
+	}
+
+ 	/* 11 Mbps */
+	if ( BIT3 & (*rate) ) {
+		len += (UINT8)1;
+		*datarate = (UINT8)22;
+		datarate++;
+	}
+
+	pstr->len = len;
+
+	DBFEXIT;
+	return;
+}
+
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_set_oprateset
+*
+* Convert the wlan octet string into an hfa384x bit area.
+*
+* Arguments:
+*	rate		Prism2 bit area
+*	pstr		wlan octet string
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+void prism2mgmt_set_oprateset(UINT16 *rate, p80211pstrd_t *pstr)
+{
+	UINT8	*datarate;
+	int	i;
+
+	DBFENTER;
+
+	*rate = 0;
+
+	datarate = pstr->data;
+
+	for ( i=0; i < pstr->len; i++, datarate++ ) {
+		switch (*datarate) {
+		case 2: /* 1 Mbps */
+			*rate |= BIT0;
+			break;
+		case 4: /* 2 Mbps */
+			*rate |= BIT1;
+			break;
+		case 11: /* 5.5 Mbps */
+			*rate |= BIT2;
+			break;
+		case 22: /* 11 Mbps */
+			*rate |= BIT3;
+			break;
+		default:
+			WLAN_LOG_DEBUG(1, "Unrecoginzed Rate of %d\n",
+				*datarate);
+			break;
+		}
+	}
+
+	DBFEXIT;
+	return;
+}
+
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_get_grpaddr
+*
+* Retrieves a particular group address from the list of
+* group addresses.
+*
+* Arguments:
+*	did		mibitem did
+*	pstr		wlan octet string
+*	priv		prism2 driver private data structure
+*
+* Returns:
+*	Nothing
+*
+----------------------------------------------------------------*/
+void prism2mgmt_get_grpaddr(UINT32 did, p80211pstrd_t *pstr,
+	hfa384x_t *hw )
+{
+	int	index;
+
+	DBFENTER;
+
+	index = prism2mgmt_get_grpaddr_index(did);
+
+	if ( index >= 0 ) {
+		pstr->len = WLAN_ADDR_LEN;
+		memcpy(pstr->data, hw->dot11_grp_addr[index],
+			WLAN_ADDR_LEN);
+	}
+
+	DBFEXIT;
+	return;
+}
+
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_set_grpaddr
+*
+* Convert the wlan octet string into an hfa384x bit area.
+*
+* Arguments:
+*	did		mibitem did
+*	buf
+*	groups
+*
+* Returns:
+*	0	Success
+*	!0	Error
+*
+----------------------------------------------------------------*/
+int prism2mgmt_set_grpaddr(UINT32 did, UINT8 *prism2buf,
+	p80211pstrd_t *pstr, hfa384x_t *hw )
+{
+	UINT8	no_addr[WLAN_ADDR_LEN];
+	int	index;
+
+	DBFENTER;
+
+	memset(no_addr, 0, WLAN_ADDR_LEN);
+	if (memcmp(no_addr, pstr->data, WLAN_ADDR_LEN) != 0) {
+
+		/*
+		** The address is NOT 0 so we are "adding" an address to the
+		** group address list.  Check to make sure we aren't trying
+		** to add more than the maximum allowed number of group
+		** addresses in the list.  The new address is added to the
+		** end of the list regardless of the DID used to add the
+		** address.
+		*/
+
+		if (hw->dot11_grpcnt >= MAX_GRP_ADDR) return(-1);
+
+		memcpy(hw->dot11_grp_addr[hw->dot11_grpcnt], pstr->data,
+								 WLAN_ADDR_LEN);
+		hw->dot11_grpcnt += 1;
+	} else {
+
+		/*
+		** The address is 0.  Interpret this as "deleting" an address
+		** from the group address list.  Get the address index from
+		** the DID.  If this is within the range of used addresses,
+		** then delete the specified address by shifting all following
+		** addresses down.  Then clear the last address (which should
+		** now be unused).  If the address index is NOT within the
+		** range of used addresses, then just ignore the address.
+		*/
+
+		index = prism2mgmt_get_grpaddr_index(did);
+		if (index >= 0 && index < hw->dot11_grpcnt) {
+			hw->dot11_grpcnt -= 1;
+			memmove(hw->dot11_grp_addr[index],
+				hw->dot11_grp_addr[index + 1],
+				((hw->dot11_grpcnt)-index) * WLAN_ADDR_LEN);
+			memset(hw->dot11_grp_addr[hw->dot11_grpcnt], 0,
+								 WLAN_ADDR_LEN);
+		}
+	}
+
+	DBFEXIT;
+	return(0);
+}
+
+
+/*----------------------------------------------------------------
+* prism2mgmt_get_grpaddr_index
+*
+* Gets the index in the group address list based on the did.
+*
+* Arguments:
+*	did		mibitem did
+*
+* Returns:
+*	>= 0	If valid did
+*	< 0	If not valid did
+*
+----------------------------------------------------------------*/
+int prism2mgmt_get_grpaddr_index( UINT32 did )
+{
+	int	index;
+
+	DBFENTER;
+
+	index = -1;
+
+	switch (did) {
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address1:
+		index = 0;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address2:
+		index = 1;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address3:
+		index = 2;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address4:
+		index = 3;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address5:
+		index = 4;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address6:
+		index = 5;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address7:
+		index = 6;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address8:
+		index = 7;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address9:
+		index = 8;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address10:
+		index = 9;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address11:
+		index = 10;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address12:
+		index = 11;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address13:
+		index = 12;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address14:
+		index = 13;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address15:
+		index = 14;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address16:
+		index = 15;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address17:
+		index = 16;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address18:
+		index = 17;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address19:
+		index = 18;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address20:
+		index = 19;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address21:
+		index = 20;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address22:
+		index = 21;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address23:
+		index = 22;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address24:
+		index = 23;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address25:
+		index = 24;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address26:
+		index = 25;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address27:
+		index = 26;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address28:
+		index = 27;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address29:
+		index = 28;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address30:
+		index = 29;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address31:
+		index = 30;
+		break;
+	case DIDmib_dot11mac_dot11GroupAddressesTable_dot11Address32:
+		index = 31;
+		break;
+	}
+
+	DBFEXIT;
+	return index;
+}
diff --git a/drivers/staging/wlan-ng/prism2sta.c b/drivers/staging/wlan-ng/prism2sta.c
new file mode 100644
index 0000000..18aa15f
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2sta.c
@@ -0,0 +1,2502 @@
+/* src/prism2/driver/prism2sta.c
+*
+* Implements the station functionality for prism2
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*
+* This file implements the module and linux pcmcia routines for the
+* prism2 driver.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+#define WLAN_DBVAR	prism2_debug
+
+#include "version.h"
+
+
+#include <linux/version.h>
+
+#include <linux/module.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,25))
+#include <linux/moduleparam.h>
+#endif
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#include <linux/tqueue.h>
+#else
+#include <linux/workqueue.h>
+#endif
+
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <linux/if_arp.h>
+
+#if (WLAN_HOSTIF == WLAN_PCMCIA)
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+#endif
+
+#include "wlan_compat.h"
+
+#if ((WLAN_HOSTIF == WLAN_PLX) || (WLAN_HOSTIF == WLAN_PCI))
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#endif
+
+/*================================================================*/
+/* Project Includes */
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211req.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "hfa384x.h"
+#include "prism2mgmt.h"
+
+/*================================================================*/
+/* Local Constants */
+
+/*================================================================*/
+/* Local Macros */
+
+/*================================================================*/
+/* Local Types */
+
+/*================================================================*/
+/* Local Static Definitions */
+
+#if (WLAN_HOSTIF == WLAN_PCMCIA)
+#define DRIVER_SUFFIX	"_cs"
+#elif (WLAN_HOSTIF == WLAN_PLX)
+#define DRIVER_SUFFIX	"_plx"
+typedef char* dev_info_t;
+#elif (WLAN_HOSTIF == WLAN_PCI)
+#define DRIVER_SUFFIX	"_pci"
+typedef char* dev_info_t;
+#elif (WLAN_HOSTIF == WLAN_USB)
+#define DRIVER_SUFFIX	"_usb"
+typedef char* dev_info_t;
+#else
+#error "HOSTIF unsupported or undefined!"
+#endif
+
+static char		*version = "prism2" DRIVER_SUFFIX ".o: " WLAN_RELEASE;
+static dev_info_t	dev_info = "prism2" DRIVER_SUFFIX;
+
+#if (WLAN_HOSTIF == WLAN_PLX || WLAN_HOSTIF == WLAN_PCI)
+#ifdef CONFIG_PM
+static int prism2sta_suspend_pci(struct pci_dev *pdev, pm_message_t state);
+static int prism2sta_resume_pci(struct pci_dev *pdev);
+#endif
+#endif
+
+#if (WLAN_HOSTIF == WLAN_PCI)
+
+#endif /* WLAN_PCI */
+
+static wlandevice_t *create_wlan(void);
+
+/*----------------------------------------------------------------*/
+/* --Module Parameters */
+
+int      prism2_reset_holdtime=30;	/* Reset hold time in ms */
+int	 prism2_reset_settletime=100;	/* Reset settle time in ms */
+
+#if (WLAN_HOSTIF == WLAN_USB)
+static int	prism2_doreset=0;		/* Do a reset at init? */
+#else
+static int      prism2_doreset=1;		/* Do a reset at init? */
+int             prism2_bap_timeout=1000;        /* BAP timeout */
+int		prism2_irq_evread_max=20;	/* Maximum number of
+						 * ev_reads (loops)
+						 * in irq handler
+						 */
+#endif
+
+#ifdef WLAN_INCLUDE_DEBUG
+int prism2_debug=0;
+module_param( prism2_debug, int, 0644);
+MODULE_PARM_DESC(prism2_debug, "prism2 debugging");
+#endif
+
+module_param( prism2_doreset, int, 0644);
+MODULE_PARM_DESC(prism2_doreset, "Issue a reset on initialization");
+
+module_param( prism2_reset_holdtime, int, 0644);
+MODULE_PARM_DESC( prism2_reset_holdtime, "reset hold time in ms");
+module_param( prism2_reset_settletime, int, 0644);
+MODULE_PARM_DESC( prism2_reset_settletime, "reset settle time in ms");
+
+#if (WLAN_HOSTIF != WLAN_USB)
+module_param( prism2_bap_timeout, int, 0644);
+MODULE_PARM_DESC(prism2_bap_timeout, "BufferAccessPath Timeout in 10*n us");
+module_param( prism2_irq_evread_max, int, 0644);
+MODULE_PARM_DESC( prism2_irq_evread_max, "Maximim number of event reads in interrupt handler");
+#endif
+
+MODULE_LICENSE("Dual MPL/GPL");
+
+/*================================================================*/
+/* Local Function Declarations */
+
+static int	prism2sta_open(wlandevice_t *wlandev);
+static int	prism2sta_close(wlandevice_t *wlandev);
+static void	prism2sta_reset(wlandevice_t *wlandev );
+static int      prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb, p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep);
+static int	prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg);
+static int	prism2sta_getcardinfo(wlandevice_t *wlandev);
+static int	prism2sta_globalsetup(wlandevice_t *wlandev);
+static int      prism2sta_setmulticast(wlandevice_t *wlandev,
+				       netdevice_t *dev);
+
+static void	prism2sta_inf_handover(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_tallies(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void     prism2sta_inf_hostscanresults(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_scanresults(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_chinforesults(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_linkstatus(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_assocstatus(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_authreq(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_authreq_defer(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+static void	prism2sta_inf_psusercnt(
+			wlandevice_t *wlandev, hfa384x_InfFrame_t *inf);
+
+#ifdef CONFIG_PROC_FS
+static int
+prism2sta_proc_read(
+	char	*page,
+	char	**start,
+	off_t	offset,
+	int	count,
+	int	*eof,
+	void	*data);
+#endif
+
+/*================================================================*/
+/* Function Definitions */
+
+/*----------------------------------------------------------------
+* dmpmem
+*
+* Debug utility function to dump memory to the kernel debug log.
+*
+* Arguments:
+*	buf	ptr data we want dumped
+*	len	length of data
+*
+* Returns:
+*	nothing
+* Side effects:
+*
+* Call context:
+*	process thread
+*	interrupt
+----------------------------------------------------------------*/
+inline void dmpmem(void *buf, int n)
+{
+	int c;
+	for ( c= 0; c < n; c++) {
+		if ( (c % 16) == 0 ) printk(KERN_DEBUG"dmp[%d]: ", c);
+		printk("%02x ", ((UINT8*)buf)[c]);
+		if ( (c % 16) == 15 ) printk("\n");
+	}
+	if ( (c % 16) != 0 ) printk("\n");
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_open
+*
+* WLAN device open method.  Called from p80211netdev when kernel
+* device open (start) method is called in response to the
+* SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
+* from clear to set.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	0	success
+*	>0	f/w reported error
+*	<0	driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int prism2sta_open(wlandevice_t *wlandev)
+{
+	DBFENTER;
+
+#ifdef ANCIENT_MODULE_CODE
+	MOD_INC_USE_COUNT;
+#endif
+
+	/* We don't currently have to do anything else.
+	 * The setup of the MAC should be subsequently completed via
+	 * the mlme commands.
+	 * Higher layers know we're ready from dev->start==1 and
+	 * dev->tbusy==0.  Our rx path knows to pass up received/
+	 * frames because of dev->flags&IFF_UP is true.
+	 */
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_close
+*
+* WLAN device close method.  Called from p80211netdev when kernel
+* device close method is called in response to the
+* SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP
+* from set to clear.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	0	success
+*	>0	f/w reported error
+*	<0	driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int prism2sta_close(wlandevice_t *wlandev)
+{
+	DBFENTER;
+
+#ifdef ANCIENT_MODULE_CODE
+	MOD_DEC_USE_COUNT;
+#endif
+
+	/* We don't currently have to do anything else.
+	 * Higher layers know we're not ready from dev->start==0 and
+	 * dev->tbusy==1.  Our rx path knows to not pass up received
+	 * frames because of dev->flags&IFF_UP is false.
+	 */
+
+	DBFEXIT;
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_reset
+*
+* Not currently implented.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	none
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static void prism2sta_reset(wlandevice_t *wlandev )
+{
+	DBFENTER;
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_txframe
+*
+* Takes a frame from p80211 and queues it for transmission.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	pb		packet buffer struct.  Contains an 802.11
+*			data frame.
+*       p80211_hdr      points to the 802.11 header for the packet.
+* Returns:
+*	0		Success and more buffs available
+*	1		Success but no more buffs
+*	2		Allocation failure
+*	4		Buffer full or queue busy
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
+			     p80211_hdr_t *p80211_hdr,
+			     p80211_metawep_t *p80211_wep)
+{
+	hfa384x_t		*hw = (hfa384x_t *)wlandev->priv;
+	int			result;
+	DBFENTER;
+
+	/* If necessary, set the 802.11 WEP bit */
+	if ((wlandev->hostwep & (HOSTWEP_PRIVACYINVOKED | HOSTWEP_ENCRYPT)) == HOSTWEP_PRIVACYINVOKED) {
+		p80211_hdr->a3.fc |= host2ieee16(WLAN_SET_FC_ISWEP(1));
+	}
+
+	result = hfa384x_drvr_txframe(hw, skb, p80211_hdr, p80211_wep);
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_mlmerequest
+*
+* wlan command message handler.  All we do here is pass the message
+* over to the prism2sta_mgmt_handler.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msg		wlan command message
+* Returns:
+*	0		success
+*	<0		successful acceptance of message, but we're
+*			waiting for an async process to finish before
+*			we're done with the msg.  When the asynch
+*			process is done, we'll call the p80211
+*			function p80211req_confirm() .
+*	>0		An error occurred while we were handling
+*			the message.
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+
+	int result = 0;
+	DBFENTER;
+
+	switch( msg->msgcode )
+	{
+	case DIDmsg_dot11req_mibget :
+		WLAN_LOG_DEBUG(2,"Received mibget request\n");
+		result = prism2mgmt_mibset_mibget(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_mibset :
+		WLAN_LOG_DEBUG(2,"Received mibset request\n");
+		result = prism2mgmt_mibset_mibget(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_powermgmt :
+		WLAN_LOG_DEBUG(2,"Received powermgmt request\n");
+		result = prism2mgmt_powermgmt(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_scan :
+		WLAN_LOG_DEBUG(2,"Received scan request\n");
+		result = prism2mgmt_scan(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_scan_results :
+		WLAN_LOG_DEBUG(2,"Received scan_results request\n");
+		result = prism2mgmt_scan_results(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_join :
+		WLAN_LOG_DEBUG(2,"Received join request\n");
+		result = prism2mgmt_join(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_authenticate :
+		WLAN_LOG_DEBUG(2,"Received authenticate request\n");
+		result = prism2mgmt_authenticate(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_deauthenticate :
+		WLAN_LOG_DEBUG(2,"Received mlme deauthenticate request\n");
+		result = prism2mgmt_deauthenticate(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_associate :
+		WLAN_LOG_DEBUG(2,"Received mlme associate request\n");
+		result = prism2mgmt_associate(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_reassociate :
+		WLAN_LOG_DEBUG(2,"Received mlme reassociate request\n");
+		result = prism2mgmt_reassociate(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_disassociate :
+		WLAN_LOG_DEBUG(2,"Received mlme disassociate request\n");
+		result = prism2mgmt_disassociate(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_reset :
+		WLAN_LOG_DEBUG(2,"Received mlme reset request\n");
+		result = prism2mgmt_reset(wlandev, msg);
+		break;
+	case DIDmsg_dot11req_start :
+		WLAN_LOG_DEBUG(2,"Received mlme start request\n");
+		result = prism2mgmt_start(wlandev, msg);
+		break;
+	/*
+	 * Prism2 specific messages
+	 */
+	case DIDmsg_p2req_join :
+		WLAN_LOG_DEBUG(2,"Received p2 join request\n");
+		result = prism2mgmt_p2_join(wlandev, msg);
+		break;
+       	case DIDmsg_p2req_readpda :
+		WLAN_LOG_DEBUG(2,"Received mlme readpda request\n");
+		result = prism2mgmt_readpda(wlandev, msg);
+		break;
+	case DIDmsg_p2req_readcis :
+		WLAN_LOG_DEBUG(2,"Received mlme readcis request\n");
+		result = prism2mgmt_readcis(wlandev, msg);
+		break;
+	case DIDmsg_p2req_auxport_state :
+		WLAN_LOG_DEBUG(2,"Received mlme auxport_state request\n");
+		result = prism2mgmt_auxport_state(wlandev, msg);
+		break;
+	case DIDmsg_p2req_auxport_read :
+		WLAN_LOG_DEBUG(2,"Received mlme auxport_read request\n");
+		result = prism2mgmt_auxport_read(wlandev, msg);
+		break;
+	case DIDmsg_p2req_auxport_write :
+		WLAN_LOG_DEBUG(2,"Received mlme auxport_write request\n");
+		result = prism2mgmt_auxport_write(wlandev, msg);
+		break;
+	case DIDmsg_p2req_low_level :
+		WLAN_LOG_DEBUG(2,"Received mlme low_level request\n");
+		result = prism2mgmt_low_level(wlandev, msg);
+		break;
+        case DIDmsg_p2req_test_command :
+                WLAN_LOG_DEBUG(2,"Received mlme test_command request\n");
+                result = prism2mgmt_test_command(wlandev, msg);
+                break;
+        case DIDmsg_p2req_mmi_read :
+                WLAN_LOG_DEBUG(2,"Received mlme mmi_read request\n");
+                result = prism2mgmt_mmi_read(wlandev, msg);
+                break;
+        case DIDmsg_p2req_mmi_write :
+                WLAN_LOG_DEBUG(2,"Received mlme mmi_write request\n");
+                result = prism2mgmt_mmi_write(wlandev, msg);
+                break;
+	case DIDmsg_p2req_ramdl_state :
+		WLAN_LOG_DEBUG(2,"Received mlme ramdl_state request\n");
+		result = prism2mgmt_ramdl_state(wlandev, msg);
+		break;
+	case DIDmsg_p2req_ramdl_write :
+		WLAN_LOG_DEBUG(2,"Received mlme ramdl_write request\n");
+		result = prism2mgmt_ramdl_write(wlandev, msg);
+		break;
+	case DIDmsg_p2req_flashdl_state :
+		WLAN_LOG_DEBUG(2,"Received mlme flashdl_state request\n");
+		result = prism2mgmt_flashdl_state(wlandev, msg);
+		break;
+	case DIDmsg_p2req_flashdl_write :
+		WLAN_LOG_DEBUG(2,"Received mlme flashdl_write request\n");
+		result = prism2mgmt_flashdl_write(wlandev, msg);
+		break;
+	case DIDmsg_p2req_dump_state :
+		WLAN_LOG_DEBUG(2,"Received mlme dump_state request\n");
+		result = prism2mgmt_dump_state(wlandev, msg);
+		break;
+	case DIDmsg_p2req_channel_info :
+		WLAN_LOG_DEBUG(2,"Received mlme channel_info request\n");
+		result = prism2mgmt_channel_info(wlandev, msg);
+		break;
+	case DIDmsg_p2req_channel_info_results :
+		WLAN_LOG_DEBUG(2,"Received mlme channel_info_results request\n");
+		result = prism2mgmt_channel_info_results(wlandev, msg);
+		break;
+	/*
+	 * Linux specific messages
+	 */
+	case DIDmsg_lnxreq_hostwep :
+		break;   // ignore me.
+        case DIDmsg_lnxreq_ifstate :
+		{
+		p80211msg_lnxreq_ifstate_t	*ifstatemsg;
+                WLAN_LOG_DEBUG(2,"Received mlme ifstate request\n");
+		ifstatemsg = (p80211msg_lnxreq_ifstate_t*)msg;
+                result = prism2sta_ifstate(wlandev, ifstatemsg->ifstate.data);
+		ifstatemsg->resultcode.status =
+			P80211ENUM_msgitem_status_data_ok;
+		ifstatemsg->resultcode.data = result;
+		result = 0;
+		}
+                break;
+        case DIDmsg_lnxreq_wlansniff :
+                WLAN_LOG_DEBUG(2,"Received mlme wlansniff request\n");
+                result = prism2mgmt_wlansniff(wlandev, msg);
+                break;
+	case DIDmsg_lnxreq_autojoin :
+		WLAN_LOG_DEBUG(2,"Received mlme autojoin request\n");
+		result = prism2mgmt_autojoin(wlandev, msg);
+		break;
+	case DIDmsg_p2req_enable :
+		WLAN_LOG_DEBUG(2,"Received mlme enable request\n");
+		result = prism2mgmt_enable(wlandev, msg);
+		break;
+	case DIDmsg_lnxreq_commsquality: {
+		p80211msg_lnxreq_commsquality_t *qualmsg;
+
+		WLAN_LOG_DEBUG(2,"Received commsquality request\n");
+
+		if (hw->ap)
+			break;
+
+		qualmsg = (p80211msg_lnxreq_commsquality_t*) msg;
+
+		qualmsg->link.status = P80211ENUM_msgitem_status_data_ok;
+		qualmsg->level.status = P80211ENUM_msgitem_status_data_ok;
+		qualmsg->noise.status = P80211ENUM_msgitem_status_data_ok;
+
+
+		qualmsg->link.data = hfa384x2host_16(hw->qual.CQ_currBSS);
+		qualmsg->level.data = hfa384x2host_16(hw->qual.ASL_currBSS);
+		qualmsg->noise.data = hfa384x2host_16(hw->qual.ANL_currFC);
+
+		break;
+	}
+	default:
+		WLAN_LOG_WARNING("Unknown mgmt request message 0x%08x", msg->msgcode);
+		break;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_ifstate
+*
+* Interface state.  This is the primary WLAN interface enable/disable
+* handler.  Following the driver/load/deviceprobe sequence, this
+* function must be called with a state of "enable" before any other
+* commands will be accepted.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	msgp		ptr to msg buffer
+*
+* Returns:
+* 	A p80211 message resultcode value.
+*
+* Side effects:
+*
+* Call context:
+*	process thread  (usually)
+*	interrupt
+----------------------------------------------------------------*/
+UINT32 prism2sta_ifstate(wlandevice_t *wlandev, UINT32 ifstate)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	UINT32 			result;
+	DBFENTER;
+
+	result = P80211ENUM_resultcode_implementation_failure;
+
+	WLAN_LOG_DEBUG(2, "Current MSD state(%d), requesting(%d)\n",
+	                  wlandev->msdstate, ifstate);
+	switch (ifstate)
+	{
+	case P80211ENUM_ifstate_fwload:
+		switch (wlandev->msdstate) {
+		case WLAN_MSD_HWPRESENT:
+			wlandev->msdstate = WLAN_MSD_FWLOAD_PENDING;
+			/*
+			 * Initialize the device+driver sufficiently
+			 * for firmware loading.
+			 */
+#if (WLAN_HOSTIF != WLAN_USB)
+			result=hfa384x_cmd_initialize(hw);
+#else
+			if ((result=hfa384x_drvr_start(hw))) {
+				WLAN_LOG_ERROR(
+					"hfa384x_drvr_start() failed,"
+					"result=%d\n", (int)result);
+				result =
+				P80211ENUM_resultcode_implementation_failure;
+				wlandev->msdstate = WLAN_MSD_HWPRESENT;
+				break;
+			}
+#endif
+			wlandev->msdstate = WLAN_MSD_FWLOAD;
+			result = P80211ENUM_resultcode_success;
+			break;
+		case WLAN_MSD_FWLOAD:
+			hfa384x_cmd_initialize(hw);
+			result = P80211ENUM_resultcode_success;
+			break;
+		case WLAN_MSD_RUNNING:
+			WLAN_LOG_WARNING(
+				"Cannot enter fwload state from enable state,"
+				"you must disable first.\n");
+			result = P80211ENUM_resultcode_invalid_parameters;
+			break;
+		case WLAN_MSD_HWFAIL:
+		default:
+			/* probe() had a problem or the msdstate contains
+			 * an unrecognized value, there's nothing we can do.
+			 */
+			result = P80211ENUM_resultcode_implementation_failure;
+			break;
+		}
+		break;
+	case P80211ENUM_ifstate_enable:
+		switch (wlandev->msdstate) {
+		case WLAN_MSD_HWPRESENT:
+		case WLAN_MSD_FWLOAD:
+			wlandev->msdstate = WLAN_MSD_RUNNING_PENDING;
+			/* Initialize the device+driver for full
+			 * operation. Note that this might me an FWLOAD to
+			 * to RUNNING transition so we must not do a chip
+			 * or board level reset.  Note that on failure,
+			 * the MSD state is set to HWPRESENT because we
+			 * can't make any assumptions about the state
+			 * of the hardware or a previous firmware load.
+			 */
+			if ((result=hfa384x_drvr_start(hw))) {
+				WLAN_LOG_ERROR(
+					"hfa384x_drvr_start() failed,"
+					"result=%d\n", (int)result);
+				result =
+				P80211ENUM_resultcode_implementation_failure;
+				wlandev->msdstate = WLAN_MSD_HWPRESENT;
+				break;
+			}
+
+			if ((result=prism2sta_getcardinfo(wlandev))) {
+				WLAN_LOG_ERROR(
+					"prism2sta_getcardinfo() failed,"
+					"result=%d\n", (int)result);
+				result =
+				P80211ENUM_resultcode_implementation_failure;
+				hfa384x_drvr_stop(hw);
+				wlandev->msdstate = WLAN_MSD_HWPRESENT;
+				break;
+			}
+			if ((result=prism2sta_globalsetup(wlandev))) {
+				WLAN_LOG_ERROR(
+					"prism2sta_globalsetup() failed,"
+					"result=%d\n", (int)result);
+				result =
+				P80211ENUM_resultcode_implementation_failure;
+				hfa384x_drvr_stop(hw);
+				wlandev->msdstate = WLAN_MSD_HWPRESENT;
+				break;
+			}
+			wlandev->msdstate = WLAN_MSD_RUNNING;
+			hw->join_ap = 0;
+			hw->join_retries = 60;
+			result = P80211ENUM_resultcode_success;
+			break;
+		case WLAN_MSD_RUNNING:
+			/* Do nothing, we're already in this state.*/
+			result = P80211ENUM_resultcode_success;
+			break;
+		case WLAN_MSD_HWFAIL:
+		default:
+			/* probe() had a problem or the msdstate contains
+			 * an unrecognized value, there's nothing we can do.
+			 */
+			result = P80211ENUM_resultcode_implementation_failure;
+			break;
+		}
+		break;
+	case P80211ENUM_ifstate_disable:
+		switch (wlandev->msdstate) {
+		case WLAN_MSD_HWPRESENT:
+			/* Do nothing, we're already in this state.*/
+			result = P80211ENUM_resultcode_success;
+			break;
+		case WLAN_MSD_FWLOAD:
+		case WLAN_MSD_RUNNING:
+			wlandev->msdstate = WLAN_MSD_HWPRESENT_PENDING;
+			/*
+			 * TODO: Shut down the MAC completely. Here a chip
+			 * or board level reset is probably called for.
+			 * After a "disable" _all_ results are lost, even
+			 * those from a fwload.
+			 */
+			if (!wlandev->hwremoved)
+				netif_carrier_off(wlandev->netdev);
+
+			hfa384x_drvr_stop(hw);
+
+			wlandev->macmode = WLAN_MACMODE_NONE;
+			wlandev->msdstate = WLAN_MSD_HWPRESENT;
+			result = P80211ENUM_resultcode_success;
+			break;
+		case WLAN_MSD_HWFAIL:
+		default:
+			/* probe() had a problem or the msdstate contains
+			 * an unrecognized value, there's nothing we can do.
+			 */
+			result = P80211ENUM_resultcode_implementation_failure;
+			break;
+		}
+		break;
+	default:
+		result = P80211ENUM_resultcode_invalid_parameters;
+		break;
+	}
+
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_getcardinfo
+*
+* Collect the NICID, firmware version and any other identifiers
+* we'd like to have in host-side data structures.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	0	success
+*	>0	f/w reported error
+*	<0	driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	Either.
+----------------------------------------------------------------*/
+static int prism2sta_getcardinfo(wlandevice_t *wlandev)
+{
+	int 			result = 0;
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	UINT16                  temp;
+	UINT8			snum[HFA384x_RID_NICSERIALNUMBER_LEN];
+	char			pstr[(HFA384x_RID_NICSERIALNUMBER_LEN * 4) + 1];
+
+	DBFENTER;
+
+	/* Collect version and compatibility info */
+	/*  Some are critical, some are not */
+	/* NIC identity */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICIDENTITY,
+			&hw->ident_nic, sizeof(hfa384x_compident_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve NICIDENTITY\n");
+		goto failed;
+	}
+
+	/* get all the nic id fields in host byte order */
+	hw->ident_nic.id = hfa384x2host_16(hw->ident_nic.id);
+	hw->ident_nic.variant = hfa384x2host_16(hw->ident_nic.variant);
+	hw->ident_nic.major = hfa384x2host_16(hw->ident_nic.major);
+	hw->ident_nic.minor = hfa384x2host_16(hw->ident_nic.minor);
+
+	WLAN_LOG_INFO( "ident: nic h/w: id=0x%02x %d.%d.%d\n",
+			hw->ident_nic.id, hw->ident_nic.major,
+			hw->ident_nic.minor, hw->ident_nic.variant);
+
+	/* Primary f/w identity */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRIIDENTITY,
+			&hw->ident_pri_fw, sizeof(hfa384x_compident_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve PRIIDENTITY\n");
+		goto failed;
+	}
+
+	/* get all the private fw id fields in host byte order */
+	hw->ident_pri_fw.id = hfa384x2host_16(hw->ident_pri_fw.id);
+	hw->ident_pri_fw.variant = hfa384x2host_16(hw->ident_pri_fw.variant);
+	hw->ident_pri_fw.major = hfa384x2host_16(hw->ident_pri_fw.major);
+	hw->ident_pri_fw.minor = hfa384x2host_16(hw->ident_pri_fw.minor);
+
+	WLAN_LOG_INFO( "ident: pri f/w: id=0x%02x %d.%d.%d\n",
+			hw->ident_pri_fw.id, hw->ident_pri_fw.major,
+			hw->ident_pri_fw.minor, hw->ident_pri_fw.variant);
+
+	/* Station (Secondary?) f/w identity */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STAIDENTITY,
+			&hw->ident_sta_fw, sizeof(hfa384x_compident_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve STAIDENTITY\n");
+		goto failed;
+	}
+
+	if (hw->ident_nic.id < 0x8000) {
+		WLAN_LOG_ERROR("FATAL: Card is not an Intersil Prism2/2.5/3\n");
+		result = -1;
+		goto failed;
+	}
+
+	/* get all the station fw id fields in host byte order */
+	hw->ident_sta_fw.id = hfa384x2host_16(hw->ident_sta_fw.id);
+	hw->ident_sta_fw.variant = hfa384x2host_16(hw->ident_sta_fw.variant);
+	hw->ident_sta_fw.major = hfa384x2host_16(hw->ident_sta_fw.major);
+	hw->ident_sta_fw.minor = hfa384x2host_16(hw->ident_sta_fw.minor);
+
+	/* strip out the 'special' variant bits */
+	hw->mm_mods = hw->ident_sta_fw.variant & (BIT14 | BIT15);
+	hw->ident_sta_fw.variant &= ~((UINT16)(BIT14 | BIT15));
+
+	if  ( hw->ident_sta_fw.id == 0x1f ) {
+		hw->ap = 0;
+		WLAN_LOG_INFO(
+			"ident: sta f/w: id=0x%02x %d.%d.%d\n",
+			hw->ident_sta_fw.id, hw->ident_sta_fw.major,
+			hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
+	} else {
+		hw->ap = 1;
+		WLAN_LOG_INFO(
+			"ident:  ap f/w: id=0x%02x %d.%d.%d\n",
+			hw->ident_sta_fw.id, hw->ident_sta_fw.major,
+			hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
+	}
+
+	/* Compatibility range, Modem supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_MFISUPRANGE,
+			&hw->cap_sup_mfi, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve MFISUPRANGE\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, modem interface supplier
+	fields in byte order */
+	hw->cap_sup_mfi.role = hfa384x2host_16(hw->cap_sup_mfi.role);
+	hw->cap_sup_mfi.id = hfa384x2host_16(hw->cap_sup_mfi.id);
+	hw->cap_sup_mfi.variant = hfa384x2host_16(hw->cap_sup_mfi.variant);
+	hw->cap_sup_mfi.bottom = hfa384x2host_16(hw->cap_sup_mfi.bottom);
+	hw->cap_sup_mfi.top = hfa384x2host_16(hw->cap_sup_mfi.top);
+
+	WLAN_LOG_INFO(
+		"MFI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_sup_mfi.role, hw->cap_sup_mfi.id,
+		hw->cap_sup_mfi.variant, hw->cap_sup_mfi.bottom,
+		hw->cap_sup_mfi.top);
+
+	/* Compatibility range, Controller supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CFISUPRANGE,
+			&hw->cap_sup_cfi, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve CFISUPRANGE\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, controller interface supplier
+	fields in byte order */
+	hw->cap_sup_cfi.role = hfa384x2host_16(hw->cap_sup_cfi.role);
+	hw->cap_sup_cfi.id = hfa384x2host_16(hw->cap_sup_cfi.id);
+	hw->cap_sup_cfi.variant = hfa384x2host_16(hw->cap_sup_cfi.variant);
+	hw->cap_sup_cfi.bottom = hfa384x2host_16(hw->cap_sup_cfi.bottom);
+	hw->cap_sup_cfi.top = hfa384x2host_16(hw->cap_sup_cfi.top);
+
+	WLAN_LOG_INFO(
+		"CFI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_sup_cfi.role, hw->cap_sup_cfi.id,
+		hw->cap_sup_cfi.variant, hw->cap_sup_cfi.bottom,
+		hw->cap_sup_cfi.top);
+
+	/* Compatibility range, Primary f/w supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRISUPRANGE,
+			&hw->cap_sup_pri, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve PRISUPRANGE\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, primary firmware supplier
+	fields in byte order */
+	hw->cap_sup_pri.role = hfa384x2host_16(hw->cap_sup_pri.role);
+	hw->cap_sup_pri.id = hfa384x2host_16(hw->cap_sup_pri.id);
+	hw->cap_sup_pri.variant = hfa384x2host_16(hw->cap_sup_pri.variant);
+	hw->cap_sup_pri.bottom = hfa384x2host_16(hw->cap_sup_pri.bottom);
+	hw->cap_sup_pri.top = hfa384x2host_16(hw->cap_sup_pri.top);
+
+	WLAN_LOG_INFO(
+		"PRI:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_sup_pri.role, hw->cap_sup_pri.id,
+		hw->cap_sup_pri.variant, hw->cap_sup_pri.bottom,
+		hw->cap_sup_pri.top);
+
+	/* Compatibility range, Station f/w supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STASUPRANGE,
+			&hw->cap_sup_sta, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve STASUPRANGE\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, station firmware supplier
+	fields in byte order */
+	hw->cap_sup_sta.role = hfa384x2host_16(hw->cap_sup_sta.role);
+	hw->cap_sup_sta.id = hfa384x2host_16(hw->cap_sup_sta.id);
+	hw->cap_sup_sta.variant = hfa384x2host_16(hw->cap_sup_sta.variant);
+	hw->cap_sup_sta.bottom = hfa384x2host_16(hw->cap_sup_sta.bottom);
+	hw->cap_sup_sta.top = hfa384x2host_16(hw->cap_sup_sta.top);
+
+	if ( hw->cap_sup_sta.id == 0x04 ) {
+		WLAN_LOG_INFO(
+		"STA:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_sup_sta.role, hw->cap_sup_sta.id,
+		hw->cap_sup_sta.variant, hw->cap_sup_sta.bottom,
+		hw->cap_sup_sta.top);
+	} else {
+		WLAN_LOG_INFO(
+		"AP:SUP:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_sup_sta.role, hw->cap_sup_sta.id,
+		hw->cap_sup_sta.variant, hw->cap_sup_sta.bottom,
+		hw->cap_sup_sta.top);
+	}
+
+	/* Compatibility range, primary f/w actor, CFI supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRI_CFIACTRANGES,
+			&hw->cap_act_pri_cfi, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve PRI_CFIACTRANGES\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, primary f/w actor, CFI supplier
+	fields in byte order */
+	hw->cap_act_pri_cfi.role = hfa384x2host_16(hw->cap_act_pri_cfi.role);
+	hw->cap_act_pri_cfi.id = hfa384x2host_16(hw->cap_act_pri_cfi.id);
+	hw->cap_act_pri_cfi.variant = hfa384x2host_16(hw->cap_act_pri_cfi.variant);
+	hw->cap_act_pri_cfi.bottom = hfa384x2host_16(hw->cap_act_pri_cfi.bottom);
+	hw->cap_act_pri_cfi.top = hfa384x2host_16(hw->cap_act_pri_cfi.top);
+
+	WLAN_LOG_INFO(
+		"PRI-CFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_act_pri_cfi.role, hw->cap_act_pri_cfi.id,
+		hw->cap_act_pri_cfi.variant, hw->cap_act_pri_cfi.bottom,
+		hw->cap_act_pri_cfi.top);
+
+	/* Compatibility range, sta f/w actor, CFI supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_CFIACTRANGES,
+			&hw->cap_act_sta_cfi, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve STA_CFIACTRANGES\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, station f/w actor, CFI supplier
+	fields in byte order */
+	hw->cap_act_sta_cfi.role = hfa384x2host_16(hw->cap_act_sta_cfi.role);
+	hw->cap_act_sta_cfi.id = hfa384x2host_16(hw->cap_act_sta_cfi.id);
+	hw->cap_act_sta_cfi.variant = hfa384x2host_16(hw->cap_act_sta_cfi.variant);
+	hw->cap_act_sta_cfi.bottom = hfa384x2host_16(hw->cap_act_sta_cfi.bottom);
+	hw->cap_act_sta_cfi.top = hfa384x2host_16(hw->cap_act_sta_cfi.top);
+
+	WLAN_LOG_INFO(
+		"STA-CFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_act_sta_cfi.role, hw->cap_act_sta_cfi.id,
+		hw->cap_act_sta_cfi.variant, hw->cap_act_sta_cfi.bottom,
+		hw->cap_act_sta_cfi.top);
+
+	/* Compatibility range, sta f/w actor, MFI supplier */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_MFIACTRANGES,
+			&hw->cap_act_sta_mfi, sizeof(hfa384x_caplevel_t));
+	if ( result ) {
+		WLAN_LOG_ERROR("Failed to retrieve STA_MFIACTRANGES\n");
+		goto failed;
+	}
+
+	/* get all the Compatibility range, station f/w actor, MFI supplier
+	fields in byte order */
+	hw->cap_act_sta_mfi.role = hfa384x2host_16(hw->cap_act_sta_mfi.role);
+	hw->cap_act_sta_mfi.id = hfa384x2host_16(hw->cap_act_sta_mfi.id);
+	hw->cap_act_sta_mfi.variant = hfa384x2host_16(hw->cap_act_sta_mfi.variant);
+	hw->cap_act_sta_mfi.bottom = hfa384x2host_16(hw->cap_act_sta_mfi.bottom);
+	hw->cap_act_sta_mfi.top = hfa384x2host_16(hw->cap_act_sta_mfi.top);
+
+	WLAN_LOG_INFO(
+		"STA-MFI:ACT:role=0x%02x:id=0x%02x:var=0x%02x:b/t=%d/%d\n",
+		hw->cap_act_sta_mfi.role, hw->cap_act_sta_mfi.id,
+		hw->cap_act_sta_mfi.variant, hw->cap_act_sta_mfi.bottom,
+		hw->cap_act_sta_mfi.top);
+
+	/* Serial Number */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICSERIALNUMBER,
+			snum, HFA384x_RID_NICSERIALNUMBER_LEN);
+	if ( !result ) {
+		wlan_mkprintstr(snum, HFA384x_RID_NICSERIALNUMBER_LEN,
+				pstr, sizeof(pstr));
+		WLAN_LOG_INFO("Prism2 card SN: %s\n", pstr);
+	} else {
+		WLAN_LOG_ERROR("Failed to retrieve Prism2 Card SN\n");
+		goto failed;
+	}
+
+	/* Collect the MAC address */
+	result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFOWNMACADDR,
+		wlandev->netdev->dev_addr, WLAN_ADDR_LEN);
+	if ( result != 0 ) {
+		WLAN_LOG_ERROR("Failed to retrieve mac address\n");
+		goto failed;
+	}
+
+	/* short preamble is always implemented */
+	wlandev->nsdcaps |= P80211_NSDCAP_SHORT_PREAMBLE;
+
+	/* find out if hardware wep is implemented */
+	hfa384x_drvr_getconfig16(hw, HFA384x_RID_PRIVACYOPTIMP, &temp);
+	if (temp)
+		wlandev->nsdcaps |= P80211_NSDCAP_HARDWAREWEP;
+
+	/* get the dBm Scaling constant */
+	hfa384x_drvr_getconfig16(hw, HFA384x_RID_CNFDBMADJUST, &temp);
+	hw->dbmadjust = temp;
+
+	/* Only enable scan by default on newer firmware */
+        if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+                                     hw->ident_sta_fw.minor,
+                                     hw->ident_sta_fw.variant) <
+	    HFA384x_FIRMWARE_VERSION(1,5,5)) {
+		wlandev->nsdcaps |= P80211_NSDCAP_NOSCAN;
+	}
+
+	/* TODO: Set any internally managed config items */
+
+	goto done;
+failed:
+	WLAN_LOG_ERROR("Failed, result=%d\n", result);
+done:
+	DBFEXIT;
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_globalsetup
+*
+* Set any global RIDs that we want to set at device activation.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	0	success
+*	>0	f/w reported error
+*	<0	driver reported error
+*
+* Side effects:
+*
+* Call context:
+*	process thread
+----------------------------------------------------------------*/
+static int prism2sta_globalsetup(wlandevice_t *wlandev)
+{
+	hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+
+	/* Set the maximum frame size */
+	return hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN,
+	                                    WLAN_DATA_MAXLEN);
+}
+
+static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev)
+{
+	int result = 0;
+	hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+
+	UINT16  promisc;
+
+	DBFENTER;
+
+	/* If we're not ready, what's the point? */
+	if ( hw->state != HFA384x_STATE_RUNNING )
+		goto exit;
+
+	/* If we're an AP, do nothing here */
+	if (hw->ap)
+		goto exit;
+
+	if ( (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0 )
+		promisc = P80211ENUM_truth_true;
+	else
+		promisc = P80211ENUM_truth_false;
+
+	result = hfa384x_drvr_setconfig16_async(hw, HFA384x_RID_PROMISCMODE, promisc);
+
+	/* XXX TODO: configure the multicast list */
+	// CLEAR_HW_MULTICAST_LIST
+	// struct dev_mc_list element = dev->mc_list;
+	// while (element != null) {
+	//  HW_ADD_MULTICAST_ADDR(element->dmi_addr, dmi_addrlen)
+	//  element = element->next;
+	// }
+
+ exit:
+	DBFEXIT;
+	return result;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_inf_handover
+*
+* Handles the receipt of a Handover info frame. Should only be present
+* in APs only.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_handover(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf)
+{
+	DBFENTER;
+	WLAN_LOG_DEBUG(2,"received infoframe:HANDOVER (unhandled)\n");
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_inf_tallies
+*
+* Handles the receipt of a CommTallies info frame.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_tallies(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	UINT16			*src16;
+	UINT32			*dst;
+	UINT32			*src32;
+	int			i;
+	int			cnt;
+
+	DBFENTER;
+
+	/*
+	** Determine if these are 16-bit or 32-bit tallies, based on the
+	** record length of the info record.
+	*/
+
+	cnt = sizeof(hfa384x_CommTallies32_t) / sizeof(UINT32);
+	if (inf->framelen > 22) {
+		dst   = (UINT32 *) &hw->tallies;
+		src32 = (UINT32 *) &inf->info.commtallies32;
+		for (i = 0; i < cnt; i++, dst++, src32++)
+			*dst += hfa384x2host_32(*src32);
+	} else {
+		dst   = (UINT32 *) &hw->tallies;
+		src16 = (UINT16 *) &inf->info.commtallies16;
+		for (i = 0; i < cnt; i++, dst++, src16++)
+			*dst += hfa384x2host_16(*src16);
+	}
+
+	DBFEXIT;
+
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_inf_scanresults
+*
+* Handles the receipt of a Scan Results info frame.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_scanresults(wlandevice_t *wlandev,
+				      hfa384x_InfFrame_t *inf)
+{
+
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	int			nbss;
+	hfa384x_ScanResult_t	*sr = &(inf->info.scanresult);
+	int			i;
+	hfa384x_JoinRequest_data_t	joinreq;
+	int			result;
+	DBFENTER;
+
+	/* Get the number of results, first in bytes, then in results */
+	nbss = (inf->framelen * sizeof(UINT16)) -
+		sizeof(inf->infotype) -
+		sizeof(inf->info.scanresult.scanreason);
+	nbss /= sizeof(hfa384x_ScanResultSub_t);
+
+	/* Print em */
+	WLAN_LOG_DEBUG(1,"rx scanresults, reason=%d, nbss=%d:\n",
+		inf->info.scanresult.scanreason, nbss);
+	for ( i = 0; i < nbss; i++) {
+		WLAN_LOG_DEBUG(1, "chid=%d anl=%d sl=%d bcnint=%d\n",
+			sr->result[i].chid,
+			sr->result[i].anl,
+			sr->result[i].sl,
+			sr->result[i].bcnint);
+		WLAN_LOG_DEBUG(1, "  capinfo=0x%04x proberesp_rate=%d\n",
+			sr->result[i].capinfo,
+			sr->result[i].proberesp_rate);
+	}
+	/* issue a join request */
+	joinreq.channel = sr->result[0].chid;
+	memcpy( joinreq.bssid, sr->result[0].bssid, WLAN_BSSID_LEN);
+	result = hfa384x_drvr_setconfig( hw,
+			HFA384x_RID_JOINREQUEST,
+			&joinreq, HFA384x_RID_JOINREQUEST_LEN);
+	if (result) {
+		WLAN_LOG_ERROR("setconfig(joinreq) failed, result=%d\n", result);
+	}
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_inf_hostscanresults
+*
+* Handles the receipt of a Scan Results info frame.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_hostscanresults(wlandevice_t *wlandev,
+					  hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	int			nbss;
+	DBFENTER;
+
+	nbss = (inf->framelen - 3) / 32;
+	WLAN_LOG_DEBUG(1, "Received %d hostscan results\n", nbss);
+
+	if (nbss > 32)
+		nbss = 32;
+
+	if (hw->scanresults)
+		kfree(hw->scanresults);
+
+	hw->scanresults = kmalloc(sizeof(hfa384x_InfFrame_t), GFP_ATOMIC);
+	memcpy(hw->scanresults, inf, sizeof(hfa384x_InfFrame_t));
+
+	if (nbss == 0)
+		nbss = -1;
+
+        /* Notify/wake the sleeping caller. */
+        hw->scanflag = nbss;
+        wake_up_interruptible(&hw->cmdq);
+
+	DBFEXIT;
+};
+
+/*----------------------------------------------------------------
+* prism2sta_inf_chinforesults
+*
+* Handles the receipt of a Channel Info Results info frame.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_chinforesults(wlandevice_t *wlandev,
+					hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	unsigned int		i, n;
+
+	DBFENTER;
+	hw->channel_info.results.scanchannels =
+		hfa384x2host_16(inf->info.chinforesult.scanchannels);
+#if 0
+	memcpy(&inf->info.chinforesult, &hw->channel_info.results, sizeof(hfa384x_ChInfoResult_t));
+#endif
+
+	for (i=0, n=0; i<HFA384x_CHINFORESULT_MAX; i++) {
+		if (hw->channel_info.results.scanchannels & (1<<i)) {
+			int 	channel=hfa384x2host_16(inf->info.chinforesult.result[n].chid)-1;
+			hfa384x_ChInfoResultSub_t *chinforesult=&hw->channel_info.results.result[channel];
+			chinforesult->chid   = channel;
+			chinforesult->anl    = hfa384x2host_16(inf->info.chinforesult.result[n].anl);
+			chinforesult->pnl    = hfa384x2host_16(inf->info.chinforesult.result[n].pnl);
+			chinforesult->active = hfa384x2host_16(inf->info.chinforesult.result[n].active);
+			WLAN_LOG_DEBUG(2, "chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
+					channel+1,
+					chinforesult->active &
+					HFA384x_CHINFORESULT_BSSACTIVE ? "signal" : "noise",
+					chinforesult->anl, chinforesult->pnl,
+					chinforesult->active & HFA384x_CHINFORESULT_PCFACTIVE ? 1 : 0
+			);
+			n++;
+		}
+	}
+	atomic_set(&hw->channel_info.done, 2);
+
+	hw->channel_info.count = n;
+	DBFEXIT;
+	return;
+}
+
+void prism2sta_processing_defer(struct work_struct *data)
+{
+	hfa384x_t		*hw = container_of(data, struct hfa384x, link_bh);
+	wlandevice_t            *wlandev = hw->wlandev;
+	hfa384x_bytestr32_t ssid;
+	int			result;
+
+	DBFENTER;
+	/* First let's process the auth frames */
+	{
+		struct sk_buff          *skb;
+		hfa384x_InfFrame_t *inf;
+
+		while ( (skb = skb_dequeue(&hw->authq)) ) {
+			inf = (hfa384x_InfFrame_t *) skb->data;
+			prism2sta_inf_authreq_defer(wlandev, inf);
+		}
+
+	}
+
+	/* Now let's handle the linkstatus stuff */
+	if (hw->link_status == hw->link_status_new)
+		goto failed;
+
+	hw->link_status = hw->link_status_new;
+
+	switch(hw->link_status) {
+	case HFA384x_LINK_NOTCONNECTED:
+		/* I'm currently assuming that this is the initial link
+		 * state.  It should only be possible immediately
+		 * following an Enable command.
+		 * Response:
+		 * Block Transmits, Ignore receives of data frames
+		 */
+		netif_carrier_off(wlandev->netdev);
+
+		WLAN_LOG_INFO("linkstatus=NOTCONNECTED (unhandled)\n");
+		break;
+
+	case HFA384x_LINK_CONNECTED:
+		/* This one indicates a successful scan/join/auth/assoc.
+		 * When we have the full MLME complement, this event will
+		 * signify successful completion of both mlme_authenticate
+		 * and mlme_associate.  State management will get a little
+		 * ugly here.
+		 * Response:
+		 * Indicate authentication and/or association
+		 * Enable Transmits, Receives and pass up data frames
+		 */
+
+		netif_carrier_on(wlandev->netdev);
+
+		/* If we are joining a specific AP, set our state and reset retries */
+		if(hw->join_ap == 1)
+			hw->join_ap = 2;
+		hw->join_retries = 60;
+
+		/* Don't call this in monitor mode */
+		if ( wlandev->netdev->type == ARPHRD_ETHER ) {
+			UINT16			portstatus;
+
+			WLAN_LOG_INFO("linkstatus=CONNECTED\n");
+
+			/* For non-usb devices, we can use the sync versions */
+			/* Collect the BSSID, and set state to allow tx */
+
+			result = hfa384x_drvr_getconfig(hw,
+							HFA384x_RID_CURRENTBSSID,
+							wlandev->bssid, WLAN_BSSID_LEN);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+					       "getconfig(0x%02x) failed, result = %d\n",
+					       HFA384x_RID_CURRENTBSSID, result);
+				goto failed;
+			}
+
+			result = hfa384x_drvr_getconfig(hw,
+							HFA384x_RID_CURRENTSSID,
+							&ssid, sizeof(ssid));
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+					       "getconfig(0x%02x) failed, result = %d\n",
+					       HFA384x_RID_CURRENTSSID, result);
+				goto failed;
+			}
+			prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *)&ssid,
+						(p80211pstrd_t *) &wlandev->ssid);
+
+			/* Collect the port status */
+			result = hfa384x_drvr_getconfig16(hw,
+							  HFA384x_RID_PORTSTATUS, &portstatus);
+			if ( result ) {
+				WLAN_LOG_DEBUG(1,
+					       "getconfig(0x%02x) failed, result = %d\n",
+					       HFA384x_RID_PORTSTATUS, result);
+				goto failed;
+			}
+			wlandev->macmode =
+				(portstatus == HFA384x_PSTATUS_CONN_IBSS) ?
+				WLAN_MACMODE_IBSS_STA : WLAN_MACMODE_ESS_STA;
+
+			/* Get the ball rolling on the comms quality stuff */
+			prism2sta_commsqual_defer(&hw->commsqual_bh);
+		}
+		break;
+
+	case HFA384x_LINK_DISCONNECTED:
+		/* This one indicates that our association is gone.  We've
+		 * lost connection with the AP and/or been disassociated.
+		 * This indicates that the MAC has completely cleared it's
+		 * associated state.  We * should send a deauth indication
+		 * (implying disassoc) up * to the MLME.
+		 * Response:
+		 * Indicate Deauthentication
+		 * Block Transmits, Ignore receives of data frames
+		 */
+		if(hw->join_ap == 2)
+		{
+			hfa384x_JoinRequest_data_t      joinreq;
+			joinreq = hw->joinreq;
+			/* Send the join request */
+			hfa384x_drvr_setconfig( hw,
+				HFA384x_RID_JOINREQUEST,
+				&joinreq, HFA384x_RID_JOINREQUEST_LEN);
+			WLAN_LOG_INFO("linkstatus=DISCONNECTED (re-submitting join)\n");
+		} else {
+			if (wlandev->netdev->type == ARPHRD_ETHER)
+				WLAN_LOG_INFO("linkstatus=DISCONNECTED (unhandled)\n");
+		}
+		wlandev->macmode = WLAN_MACMODE_NONE;
+
+		netif_carrier_off(wlandev->netdev);
+
+		break;
+
+	case HFA384x_LINK_AP_CHANGE:
+		/* This one indicates that the MAC has decided to and
+		 * successfully completed a change to another AP.  We
+		 * should probably implement a reassociation indication
+		 * in response to this one.  I'm thinking that the the
+		 * p80211 layer needs to be notified in case of
+		 * buffering/queueing issues.  User mode also needs to be
+		 * notified so that any BSS dependent elements can be
+		 * updated.
+		 * associated state.  We * should send a deauth indication
+		 * (implying disassoc) up * to the MLME.
+		 * Response:
+		 * Indicate Reassociation
+		 * Enable Transmits, Receives and pass up data frames
+		 */
+		WLAN_LOG_INFO("linkstatus=AP_CHANGE\n");
+
+		result = hfa384x_drvr_getconfig(hw,
+						HFA384x_RID_CURRENTBSSID,
+						wlandev->bssid, WLAN_BSSID_LEN);
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+				       "getconfig(0x%02x) failed, result = %d\n",
+				       HFA384x_RID_CURRENTBSSID, result);
+			goto failed;
+		}
+
+		result = hfa384x_drvr_getconfig(hw,
+						HFA384x_RID_CURRENTSSID,
+						&ssid, sizeof(ssid));
+		if ( result ) {
+			WLAN_LOG_DEBUG(1,
+				       "getconfig(0x%02x) failed, result = %d\n",
+				       HFA384x_RID_CURRENTSSID, result);
+			goto failed;
+		}
+		prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *)&ssid,
+					(p80211pstrd_t *) &wlandev->ssid);
+
+
+		hw->link_status = HFA384x_LINK_CONNECTED;
+		netif_carrier_on(wlandev->netdev);
+
+		break;
+
+	case HFA384x_LINK_AP_OUTOFRANGE:
+		/* This one indicates that the MAC has decided that the
+		 * AP is out of range, but hasn't found a better candidate
+		 * so the MAC maintains its "associated" state in case
+		 * we get back in range.  We should block transmits and
+		 * receives in this state.  Do we need an indication here?
+		 * Probably not since a polling user-mode element would
+		 * get this status from from p2PortStatus(FD40). What about
+		 * p80211?
+		 * Response:
+		 * Block Transmits, Ignore receives of data frames
+		 */
+		WLAN_LOG_INFO("linkstatus=AP_OUTOFRANGE (unhandled)\n");
+
+		netif_carrier_off(wlandev->netdev);
+
+		break;
+
+	case HFA384x_LINK_AP_INRANGE:
+		/* This one indicates that the MAC has decided that the
+		 * AP is back in range.  We continue working with our
+		 * existing association.
+		 * Response:
+		 * Enable Transmits, Receives and pass up data frames
+		 */
+		WLAN_LOG_INFO("linkstatus=AP_INRANGE\n");
+
+		hw->link_status = HFA384x_LINK_CONNECTED;
+		netif_carrier_on(wlandev->netdev);
+
+		break;
+
+	case HFA384x_LINK_ASSOCFAIL:
+		/* This one is actually a peer to CONNECTED.  We've
+		 * requested a join for a given SSID and optionally BSSID.
+		 * We can use this one to indicate authentication and
+		 * association failures.  The trick is going to be
+		 * 1) identifying the failure, and 2) state management.
+		 * Response:
+		 * Disable Transmits, Ignore receives of data frames
+		 */
+		if(hw->join_ap && --hw->join_retries > 0)
+		{
+			hfa384x_JoinRequest_data_t      joinreq;
+			joinreq = hw->joinreq;
+			/* Send the join request */
+			hfa384x_drvr_setconfig( hw,
+				HFA384x_RID_JOINREQUEST,
+				&joinreq, HFA384x_RID_JOINREQUEST_LEN);
+			WLAN_LOG_INFO("linkstatus=ASSOCFAIL (re-submitting join)\n");
+		} else {
+			WLAN_LOG_INFO("linkstatus=ASSOCFAIL (unhandled)\n");
+		}
+
+		netif_carrier_off(wlandev->netdev);
+
+		break;
+
+	default:
+		/* This is bad, IO port problems? */
+		WLAN_LOG_WARNING(
+			"unknown linkstatus=0x%02x\n", hw->link_status);
+		goto failed;
+		break;
+	}
+
+	wlandev->linkstatus = (hw->link_status == HFA384x_LINK_CONNECTED);
+#ifdef WIRELESS_EXT
+	p80211wext_event_associated(wlandev, wlandev->linkstatus);
+#endif
+
+ failed:
+	DBFEXIT;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_inf_linkstatus
+*
+* Handles the receipt of a Link Status info frame.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_linkstatus(wlandevice_t *wlandev,
+				     hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+
+	DBFENTER;
+
+	hw->link_status_new = hfa384x2host_16(inf->info.linkstatus.linkstatus);
+
+	schedule_work(&hw->link_bh);
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_inf_assocstatus
+*
+* Handles the receipt of an Association Status info frame. Should
+* be present in APs only.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_assocstatus(wlandevice_t *wlandev,
+				      hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	hfa384x_AssocStatus_t	rec;
+	int			i;
+
+	DBFENTER;
+
+	memcpy(&rec, &inf->info.assocstatus, sizeof(rec));
+	rec.assocstatus = hfa384x2host_16(rec.assocstatus);
+	rec.reason      = hfa384x2host_16(rec.reason);
+
+	/*
+	** Find the address in the list of authenticated stations.  If it wasn't
+	** found, then this address has not been previously authenticated and
+	** something weird has happened if this is anything other than an
+	** "authentication failed" message.  If the address was found, then
+	** set the "associated" flag for that station, based on whether the
+	** station is associating or losing its association.  Something weird
+	** has also happened if we find the address in the list of authenticated
+	** stations but we are getting an "authentication failed" message.
+	*/
+
+	for (i = 0; i < hw->authlist.cnt; i++)
+		if (memcmp(rec.sta_addr, hw->authlist.addr[i], WLAN_ADDR_LEN) == 0)
+			break;
+
+	if (i >= hw->authlist.cnt) {
+		if (rec.assocstatus != HFA384x_ASSOCSTATUS_AUTHFAIL)
+			WLAN_LOG_WARNING("assocstatus info frame received for non-authenticated station.\n");
+	} else {
+		hw->authlist.assoc[i] =
+			(rec.assocstatus == HFA384x_ASSOCSTATUS_STAASSOC ||
+			 rec.assocstatus == HFA384x_ASSOCSTATUS_REASSOC);
+
+		if (rec.assocstatus == HFA384x_ASSOCSTATUS_AUTHFAIL)
+			WLAN_LOG_WARNING("authfail assocstatus info frame received for authenticated station.\n");
+	}
+
+	DBFEXIT;
+
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_inf_authreq
+*
+* Handles the receipt of an Authentication Request info frame. Should
+* be present in APs only.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+*
+----------------------------------------------------------------*/
+static void prism2sta_inf_authreq(wlandevice_t *wlandev,
+				  hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	struct sk_buff *skb;
+
+	DBFENTER;
+
+	skb = dev_alloc_skb(sizeof(*inf));
+	if (skb) {
+		skb_put(skb, sizeof(*inf));
+		memcpy(skb->data, inf, sizeof(*inf));
+		skb_queue_tail(&hw->authq, skb);
+		schedule_work(&hw->link_bh);
+	}
+
+	DBFEXIT;
+}
+
+static void prism2sta_inf_authreq_defer(wlandevice_t *wlandev,
+					hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+	hfa384x_authenticateStation_data_t  rec;
+
+	int    i, added, result, cnt;
+	UINT8  *addr;
+
+	DBFENTER;
+
+	/*
+	** Build the AuthenticateStation record.  Initialize it for denying
+	** authentication.
+	*/
+
+	memcpy(rec.address, inf->info.authreq.sta_addr, WLAN_ADDR_LEN);
+	rec.status = P80211ENUM_status_unspec_failure;
+
+	/*
+	** Authenticate based on the access mode.
+	*/
+
+	switch (hw->accessmode) {
+		case WLAN_ACCESS_NONE:
+
+			/*
+			** Deny all new authentications.  However, if a station
+			** is ALREADY authenticated, then accept it.
+			*/
+
+			for (i = 0; i < hw->authlist.cnt; i++)
+				if (memcmp(rec.address, hw->authlist.addr[i],
+						WLAN_ADDR_LEN) == 0) {
+					rec.status = P80211ENUM_status_successful;
+					break;
+				}
+
+			break;
+
+		case WLAN_ACCESS_ALL:
+
+			/*
+			** Allow all authentications.
+			*/
+
+			rec.status = P80211ENUM_status_successful;
+			break;
+
+		case WLAN_ACCESS_ALLOW:
+
+			/*
+			** Only allow the authentication if the MAC address
+			** is in the list of allowed addresses.
+			**
+			** Since this is the interrupt handler, we may be here
+			** while the access list is in the middle of being
+			** updated.  Choose the list which is currently okay.
+			** See "prism2mib_priv_accessallow()" for details.
+			*/
+
+			if (hw->allow.modify == 0) {
+				cnt  = hw->allow.cnt;
+				addr = hw->allow.addr[0];
+			} else {
+				cnt  = hw->allow.cnt1;
+				addr = hw->allow.addr1[0];
+			}
+
+			for (i = 0; i < cnt; i++, addr += WLAN_ADDR_LEN)
+				if (memcmp(rec.address, addr, WLAN_ADDR_LEN) == 0) {
+					rec.status = P80211ENUM_status_successful;
+					break;
+				}
+
+			break;
+
+		case WLAN_ACCESS_DENY:
+
+			/*
+			** Allow the authentication UNLESS the MAC address is
+			** in the list of denied addresses.
+			**
+			** Since this is the interrupt handler, we may be here
+			** while the access list is in the middle of being
+			** updated.  Choose the list which is currently okay.
+			** See "prism2mib_priv_accessdeny()" for details.
+			*/
+
+			if (hw->deny.modify == 0) {
+				cnt  = hw->deny.cnt;
+				addr = hw->deny.addr[0];
+			} else {
+				cnt  = hw->deny.cnt1;
+				addr = hw->deny.addr1[0];
+			}
+
+			rec.status = P80211ENUM_status_successful;
+
+			for (i = 0; i < cnt; i++, addr += WLAN_ADDR_LEN)
+				if (memcmp(rec.address, addr, WLAN_ADDR_LEN) == 0) {
+					rec.status = P80211ENUM_status_unspec_failure;
+					break;
+				}
+
+			break;
+	}
+
+	/*
+	** If the authentication is okay, then add the MAC address to the list
+	** of authenticated stations.  Don't add the address if it is already in
+	** the list.  (802.11b does not seem to disallow a station from issuing
+	** an authentication request when the station is already authenticated.
+	** Does this sort of thing ever happen?  We might as well do the check
+	** just in case.)
+	*/
+
+	added = 0;
+
+	if (rec.status == P80211ENUM_status_successful) {
+		for (i = 0; i < hw->authlist.cnt; i++)
+			if (memcmp(rec.address, hw->authlist.addr[i], WLAN_ADDR_LEN) == 0)
+				break;
+
+		if (i >= hw->authlist.cnt) {
+			if (hw->authlist.cnt >= WLAN_AUTH_MAX) {
+				rec.status = P80211ENUM_status_ap_full;
+			} else {
+				memcpy(hw->authlist.addr[hw->authlist.cnt],
+					rec.address, WLAN_ADDR_LEN);
+				hw->authlist.cnt++;
+				added = 1;
+			}
+		}
+	}
+
+	/*
+	** Send back the results of the authentication.  If this doesn't work,
+	** then make sure to remove the address from the authenticated list if
+	** it was added.
+	*/
+
+	rec.status = host2hfa384x_16(rec.status);
+	rec.algorithm = inf->info.authreq.algorithm;
+
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_AUTHENTICATESTA,
+							&rec, sizeof(rec));
+	if (result) {
+		if (added) hw->authlist.cnt--;
+		WLAN_LOG_ERROR("setconfig(authenticatestation) failed, result=%d\n", result);
+	}
+
+	DBFEXIT;
+
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_inf_psusercnt
+*
+* Handles the receipt of a PowerSaveUserCount info frame. Should
+* be present in APs only.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to info frame (contents in hfa384x order)
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+static void prism2sta_inf_psusercnt(wlandevice_t *wlandev,
+				    hfa384x_InfFrame_t *inf)
+{
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+
+	DBFENTER;
+
+	hw->psusercount = hfa384x2host_16(inf->info.psusercnt.usercnt);
+
+	DBFEXIT;
+
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_ev_dtim
+*
+* Handles the DTIM early warning event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_dtim(wlandevice_t *wlandev)
+{
+#if 0
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+#endif
+	DBFENTER;
+	WLAN_LOG_DEBUG(3, "DTIM event, currently unhandled.\n");
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_ev_infdrop
+*
+* Handles the InfDrop event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_infdrop(wlandevice_t *wlandev)
+{
+#if 0
+        hfa384x_t               *hw = (hfa384x_t *)wlandev->priv;
+#endif
+	DBFENTER;
+	WLAN_LOG_DEBUG(3, "Info frame dropped due to card mem low.\n");
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_ev_info
+*
+* Handles the Info event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	inf		ptr to a generic info frame
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf)
+{
+	DBFENTER;
+	inf->infotype = hfa384x2host_16(inf->infotype);
+	/* Dispatch */
+	switch ( inf->infotype ) {
+		case HFA384x_IT_HANDOVERADDR:
+			prism2sta_inf_handover(wlandev, inf);
+			break;
+		case HFA384x_IT_COMMTALLIES:
+			prism2sta_inf_tallies(wlandev, inf);
+			break;
+               case HFA384x_IT_HOSTSCANRESULTS:
+                        prism2sta_inf_hostscanresults(wlandev, inf);
+                        break;
+		case HFA384x_IT_SCANRESULTS:
+			prism2sta_inf_scanresults(wlandev, inf);
+			break;
+		case HFA384x_IT_CHINFORESULTS:
+			prism2sta_inf_chinforesults(wlandev, inf);
+			break;
+		case HFA384x_IT_LINKSTATUS:
+			prism2sta_inf_linkstatus(wlandev, inf);
+			break;
+		case HFA384x_IT_ASSOCSTATUS:
+			prism2sta_inf_assocstatus(wlandev, inf);
+			break;
+		case HFA384x_IT_AUTHREQ:
+			prism2sta_inf_authreq(wlandev, inf);
+			break;
+		case HFA384x_IT_PSUSERCNT:
+			prism2sta_inf_psusercnt(wlandev, inf);
+			break;
+	        case HFA384x_IT_KEYIDCHANGED:
+			WLAN_LOG_WARNING("Unhandled IT_KEYIDCHANGED\n");
+			break;
+	        case HFA384x_IT_ASSOCREQ:
+			WLAN_LOG_WARNING("Unhandled IT_ASSOCREQ\n");
+			break;
+	        case HFA384x_IT_MICFAILURE:
+			WLAN_LOG_WARNING("Unhandled IT_MICFAILURE\n");
+			break;
+		default:
+			WLAN_LOG_WARNING(
+				"Unknown info type=0x%02x\n", inf->infotype);
+			break;
+	}
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_ev_txexc
+*
+* Handles the TxExc event.  A Transmit Exception event indicates
+* that the MAC's TX process was unsuccessful - so the packet did
+* not get transmitted.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	status		tx frame status word
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_txexc(wlandevice_t *wlandev, UINT16 status)
+{
+	DBFENTER;
+
+	WLAN_LOG_DEBUG(3, "TxExc status=0x%x.\n", status);
+
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_ev_tx
+*
+* Handles the Tx event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*	status		tx frame status word
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_tx(wlandevice_t *wlandev, UINT16 status)
+{
+	DBFENTER;
+	WLAN_LOG_DEBUG(4, "Tx Complete, status=0x%04x\n", status);
+	/* update linux network stats */
+	wlandev->linux_stats.tx_packets++;
+	DBFEXIT;
+	return;
+}
+
+
+/*----------------------------------------------------------------
+* prism2sta_ev_rx
+*
+* Handles the Rx event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_rx(wlandevice_t *wlandev, struct sk_buff *skb)
+{
+	DBFENTER;
+
+	p80211netdev_rx(wlandev, skb);
+
+	DBFEXIT;
+	return;
+}
+
+/*----------------------------------------------------------------
+* prism2sta_ev_alloc
+*
+* Handles the Alloc event.
+*
+* Arguments:
+*	wlandev		wlan device structure
+*
+* Returns:
+*	nothing
+*
+* Side effects:
+*
+* Call context:
+*	interrupt
+----------------------------------------------------------------*/
+void prism2sta_ev_alloc(wlandevice_t *wlandev)
+{
+	DBFENTER;
+
+	p80211netdev_wake_queue(wlandev);
+
+	DBFEXIT;
+	return;
+}
+
+#if (WLAN_HOSTIF == WLAN_PLX || WLAN_HOSTIF == WLAN_PCI)
+#ifdef CONFIG_PM
+static int prism2sta_suspend_pci(struct pci_dev *pdev, pm_message_t state)
+{
+       	wlandevice_t		*wlandev;
+
+	wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
+
+	/* reset hardware */
+	if (wlandev) {
+		prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+		p80211_suspend(wlandev);
+	}
+
+	// call a netif_device_detach(wlandev->netdev) ?
+
+	return 0;
+}
+
+static int prism2sta_resume_pci (struct pci_dev *pdev)
+{
+       	wlandevice_t		*wlandev;
+
+	wlandev = (wlandevice_t *) pci_get_drvdata(pdev);
+
+	if (wlandev) {
+		prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable);
+		p80211_resume(wlandev);
+	}
+
+        return 0;
+}
+#endif
+#endif
+
+/*----------------------------------------------------------------
+* create_wlan
+*
+* Called at module init time.  This creates the wlandevice_t structure
+* and initializes it with relevant bits.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	the created wlandevice_t structure.
+*
+* Side effects:
+* 	also allocates the priv/hw structures.
+*
+* Call context:
+*	process thread
+*
+----------------------------------------------------------------*/
+static wlandevice_t *create_wlan(void)
+{
+        wlandevice_t    *wlandev = NULL;
+	hfa384x_t	*hw = NULL;
+
+      	/* Alloc our structures */
+	wlandev =	kmalloc(sizeof(wlandevice_t), GFP_KERNEL);
+	hw =		kmalloc(sizeof(hfa384x_t), GFP_KERNEL);
+
+	if (!wlandev || !hw) {
+		WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+		if (wlandev)	kfree(wlandev);
+		if (hw)		kfree(hw);
+		return NULL;
+	}
+
+	/* Clear all the structs */
+	memset(wlandev, 0, sizeof(wlandevice_t));
+	memset(hw, 0, sizeof(hfa384x_t));
+
+	/* Initialize the network device object. */
+	wlandev->nsdname = dev_info;
+	wlandev->msdstate = WLAN_MSD_HWPRESENT_PENDING;
+	wlandev->priv = hw;
+	wlandev->open = prism2sta_open;
+	wlandev->close = prism2sta_close;
+	wlandev->reset = prism2sta_reset;
+#ifdef CONFIG_PROC_FS
+	wlandev->nsd_proc_read = prism2sta_proc_read;
+#endif
+	wlandev->txframe = prism2sta_txframe;
+	wlandev->mlmerequest = prism2sta_mlmerequest;
+	wlandev->set_multicast_list = prism2sta_setmulticast;
+	wlandev->tx_timeout = hfa384x_tx_timeout;
+
+	wlandev->nsdcaps = P80211_NSDCAP_HWFRAGMENT |
+	                   P80211_NSDCAP_AUTOJOIN;
+
+	/* Initialize the device private data stucture. */
+        hw->dot11_desired_bss_type = 1;
+
+	return wlandev;
+}
+
+#ifdef CONFIG_PROC_FS
+static int
+prism2sta_proc_read(
+	char	*page,
+	char	**start,
+	off_t	offset,
+	int	count,
+	int	*eof,
+	void	*data)
+{
+	char	 *p = page;
+	wlandevice_t *wlandev = (wlandevice_t *) data;
+	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
+
+	UINT16 hwtype = 0;
+
+	DBFENTER;
+	if (offset != 0) {
+		*eof = 1;
+		goto exit;
+	}
+
+	// XXX 0x0001 for prism2.5/3, 0x0000 for prism2.
+	hwtype = BIT0;
+
+#if (WLAN_HOSTIF != WLAN_USB)
+	if (hw->isram16)
+		hwtype |= BIT1;
+#endif
+
+#if (WLAN_HOSTIF == WLAN_PCI)
+	hwtype |= BIT2;
+#endif
+
+#define PRISM2_CVS_ID "$Id: prism2sta.c 1826 2007-03-19 15:37:00Z pizza $"
+
+	p += sprintf(p, "# %s version %s (%s) '%s'\n\n",
+		     dev_info,
+		     WLAN_RELEASE, WLAN_BUILD_DATE, PRISM2_CVS_ID);
+
+	p += sprintf(p, "# nic h/w: id=0x%02x %d.%d.%d\n",
+		     hw->ident_nic.id, hw->ident_nic.major,
+		     hw->ident_nic.minor, hw->ident_nic.variant);
+
+	p += sprintf(p, "# pri f/w: id=0x%02x %d.%d.%d\n",
+		     hw->ident_pri_fw.id, hw->ident_pri_fw.major,
+		     hw->ident_pri_fw.minor, hw->ident_pri_fw.variant);
+
+	if (hw->ident_sta_fw.id == 0x1f) {
+		p += sprintf(p, "# sta f/w: id=0x%02x %d.%d.%d\n",
+			     hw->ident_sta_fw.id, hw->ident_sta_fw.major,
+			     hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
+	} else {
+		p += sprintf(p, "# ap f/w: id=0x%02x %d.%d.%d\n",
+			     hw->ident_sta_fw.id, hw->ident_sta_fw.major,
+			     hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
+	}
+
+#if (WLAN_HOSTIF != WLAN_USB)
+	p += sprintf(p, "# initial nic hw type, needed for SSF ramdl\n");
+	p += sprintf(p, "initnichw=%04x\n", hwtype);
+#endif
+
+ exit:
+	DBFEXIT;
+	return (p - page);
+}
+#endif
+
+void prism2sta_commsqual_defer(struct work_struct *data)
+{
+	hfa384x_t		*hw = container_of(data, struct hfa384x, commsqual_bh);
+        wlandevice_t            *wlandev = hw->wlandev;
+	hfa384x_bytestr32_t ssid;
+	int result = 0;
+
+	DBFENTER;
+
+	if (hw->wlandev->hwremoved)
+		goto done;
+
+	/* we don't care if we're in AP mode */
+	if ((wlandev->macmode == WLAN_MACMODE_NONE) ||
+	    (wlandev->macmode == WLAN_MACMODE_ESS_AP)) {
+		goto done;
+	}
+
+	/* It only makes sense to poll these in non-IBSS */
+	if (wlandev->macmode != WLAN_MACMODE_IBSS_STA) {
+		result = hfa384x_drvr_getconfig(hw, HFA384x_RID_DBMCOMMSQUALITY,
+						&hw->qual,
+						HFA384x_RID_DBMCOMMSQUALITY_LEN);
+
+		if (result) {
+			WLAN_LOG_ERROR("error fetching commsqual\n");
+			goto done;
+		}
+
+		// qual.CQ_currBSS; // link
+		// ASL_currBSS;  // level
+		// qual.ANL_currFC; // noise
+
+		WLAN_LOG_DEBUG(3, "commsqual %d %d %d\n",
+			       hfa384x2host_16(hw->qual.CQ_currBSS),
+			       hfa384x2host_16(hw->qual.ASL_currBSS),
+			       hfa384x2host_16(hw->qual.ANL_currFC));
+	}
+
+	/* Lastly, we need to make sure the BSSID didn't change on us */
+	result = hfa384x_drvr_getconfig(hw,
+					HFA384x_RID_CURRENTBSSID,
+					wlandev->bssid, WLAN_BSSID_LEN);
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			       "getconfig(0x%02x) failed, result = %d\n",
+			       HFA384x_RID_CURRENTBSSID, result);
+		goto done;
+	}
+
+	result = hfa384x_drvr_getconfig(hw,
+					HFA384x_RID_CURRENTSSID,
+					&ssid, sizeof(ssid));
+	if ( result ) {
+		WLAN_LOG_DEBUG(1,
+			       "getconfig(0x%02x) failed, result = %d\n",
+			       HFA384x_RID_CURRENTSSID, result);
+		goto done;
+	}
+	prism2mgmt_bytestr2pstr((hfa384x_bytestr_t *)&ssid,
+				(p80211pstrd_t *) &wlandev->ssid);
+
+
+	/* Reschedule timer */
+	mod_timer(&hw->commsqual_timer, jiffies + HZ);
+
+ done:
+	DBFEXIT;
+}
+
+void prism2sta_commsqual_timer(unsigned long data)
+{
+        hfa384x_t               *hw = (hfa384x_t *) data;
+
+	DBFENTER;
+
+	schedule_work(&hw->commsqual_bh);
+
+	DBFEXIT;
+}
diff --git a/drivers/staging/wlan-ng/version.h b/drivers/staging/wlan-ng/version.h
new file mode 100644
index 0000000..305f882
--- /dev/null
+++ b/drivers/staging/wlan-ng/version.h
@@ -0,0 +1,64 @@
+/* src/include/wlan/version.h
+*
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+#ifndef _WLAN_VERSION_H
+#define _WLAN_VERSION_H
+#ifndef KERNEL_VERSION
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+#endif
+
+/* WLAN_HOSTIF (generally set on the command line, not detected) */
+#define WLAN_NONE                       0
+#define WLAN_PCMCIA                     1
+#define WLAN_ISA                        2
+#define WLAN_PCI                        3
+#define WLAN_USB                        4
+#define WLAN_PLX                        5
+#define WLAN_SLAVE                      6
+#define WLAN_RELEASE	"0.2.8"
+#define WLAN_RELEASE_CODE 0x000208
+#define WLAN_BUILD_DATE "Thu Oct  2 11:04:42 PDT 2008"
+
+#endif
diff --git a/drivers/staging/wlan-ng/wlan_compat.h b/drivers/staging/wlan-ng/wlan_compat.h
new file mode 100644
index 0000000..1702657
--- /dev/null
+++ b/drivers/staging/wlan-ng/wlan_compat.h
@@ -0,0 +1,757 @@
+/* wlan_compat.h
+*
+* Types and macros to aid in portability
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+#ifndef _WLAN_COMPAT_H
+#define _WLAN_COMPAT_H
+
+/*=============================================================*/
+/*------ Establish Platform Identity --------------------------*/
+/*=============================================================*/
+/* Key macros: */
+/* WLAN_CPU_FAMILY */
+	#define WLAN_Ix86			1
+	#define WLAN_PPC			2
+	#define WLAN_Ix96			3
+	#define WLAN_ARM			4
+	#define WLAN_ALPHA			5
+	#define WLAN_MIPS			6
+	#define WLAN_HPPA			7
+	#define WLAN_SPARC			8
+	#define WLAN_SH    			9
+	#define WLAN_x86_64                     10
+/* WLAN_SYSARCH */
+	#define WLAN_PCAT			1
+	#define WLAN_MBX			2
+	#define WLAN_RPX			3
+	#define WLAN_LWARCH			4
+	#define WLAN_PMAC			5
+	#define WLAN_SKIFF			6
+	#define WLAN_BITSY			7
+	#define WLAN_ALPHAARCH			7
+	#define WLAN_MIPSARCH			9
+	#define WLAN_HPPAARCH			10
+	#define WLAN_SPARCARCH			11
+	#define WLAN_SHARCH   			12
+
+/* Note: the PLX HOSTIF above refers to some vendors implementations for */
+/*       PCI.  It's a PLX chip that is a PCI to PCMCIA adapter, but it   */
+/*       isn't a real PCMCIA host interface adapter providing all the    */
+/*       card&socket services.                                           */
+
+#if (defined(CONFIG_PPC) || defined(CONFIG_8xx) || defined(__powerpc__))
+#ifndef __ppc__
+#define __ppc__
+#endif
+#endif
+
+#if defined(__KERNEL__)
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+
+#if defined(__x86_64__)
+	#define WLAN_CPU_FAMILY		WLAN_x86_64
+	#define WLAN_SYSARCH		WLAN_PCAT
+#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
+	#define WLAN_CPU_FAMILY		WLAN_Ix86
+	#define WLAN_SYSARCH		WLAN_PCAT
+#elif defined(__ppc__)
+	#define WLAN_CPU_FAMILY		WLAN_PPC
+	#if defined(CONFIG_MBX)
+		#define WLAN_SYSARCH	WLAN_MBX
+	#elif defined(CONFIG_RPXLITE)
+		#define WLAN_SYSARCH	WLAN_RPX
+	#elif defined(CONFIG_RPXCLASSIC)
+		#define WLAN_SYSARCH	WLAN_RPX
+	#else
+		#define WLAN_SYSARCH	WLAN_PMAC
+	#endif
+#elif defined(__arm__)
+	#define WLAN_CPU_FAMILY		WLAN_ARM
+	#define WLAN_SYSARCH		WLAN_SKIFF
+#elif defined(__alpha__)
+	#define WLAN_CPU_FAMILY		WLAN_ALPHA
+	#define WLAN_SYSARCH		WLAN_ALPHAARCH
+#elif defined(__mips__)
+	#define WLAN_CPU_FAMILY		WLAN_MIPS
+	#define WLAN_SYSARCH		WLAN_MIPSARCH
+#elif defined(__hppa__)
+	#define WLAN_CPU_FAMILY		WLAN_HPPA
+	#define WLAN_SYSARCH		WLAN_HPPAARCH
+#elif defined(__sparc__)
+        #define WLAN_CPU_FAMILY         WLAN_SPARC
+        #define WLAN_SYSARCH            WLAN_SPARC
+#elif defined(__sh__)
+        #define WLAN_CPU_FAMILY         WLAN_SH
+        #define WLAN_SYSARCH            WLAN_SHARCH
+        #ifndef __LITTLE_ENDIAN__
+        #define __LITTLE_ENDIAN__
+        #endif
+#else
+	#error "No CPU identified!"
+#endif
+#endif /* __KERNEL__ */
+
+/*
+   Some big endian machines implicitly do all I/O in little endian mode.
+
+   In particular:
+          Linux/PPC on PowerMacs (PCI)
+	  Arm/Intel Xscale (PCI)
+
+   This may also affect PLX boards and other BE &| PPC platforms;
+   as new ones are discovered, add them below.
+*/
+
+#if defined(WLAN_HOSTIF)
+#if ((WLAN_HOSTIF == WLAN_PCI) || (WLAN_HOSTIF == WLAN_PLX))
+#if ((WLAN_SYSARCH == WLAN_SKIFF) || (WLAN_SYSARCH == WLAN_PMAC) || (WLAN_SYSARCH == WLAN_SPARC))
+#define REVERSE_ENDIAN
+#endif
+#endif
+#endif
+
+/*=============================================================*/
+/*------ Bit settings -----------------------------------------*/
+/*=============================================================*/
+
+#define BIT0	0x00000001
+#define BIT1	0x00000002
+#define BIT2	0x00000004
+#define BIT3	0x00000008
+#define BIT4	0x00000010
+#define BIT5	0x00000020
+#define BIT6	0x00000040
+#define BIT7	0x00000080
+#define BIT8	0x00000100
+#define BIT9	0x00000200
+#define BIT10	0x00000400
+#define BIT11	0x00000800
+#define BIT12	0x00001000
+#define BIT13	0x00002000
+#define BIT14	0x00004000
+#define BIT15	0x00008000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+#include <linux/types.h>
+
+typedef u_int8_t	UINT8;
+typedef u_int16_t	UINT16;
+typedef u_int32_t	UINT32;
+
+typedef int8_t		INT8;
+typedef int16_t		INT16;
+typedef int32_t		INT32;
+
+typedef unsigned int    UINT;
+typedef signed int      INT;
+
+typedef u_int64_t	UINT64;
+typedef int64_t		INT64;
+
+#define UINT8_MAX	(0xffUL)
+#define UINT16_MAX	(0xffffUL)
+#define UINT32_MAX	(0xffffffffUL)
+
+#define INT8_MAX	(0x7fL)
+#define INT16_MAX	(0x7fffL)
+#define INT32_MAX	(0x7fffffffL)
+
+/*=============================================================*/
+/*------ Compiler Portability Macros --------------------------*/
+/*=============================================================*/
+#define __WLAN_ATTRIB_PACK__		__attribute__ ((packed))
+
+/*=============================================================*/
+/*------ OS Portability Macros --------------------------------*/
+/*=============================================================*/
+
+#ifndef WLAN_DBVAR
+#define WLAN_DBVAR	wlan_debug
+#endif
+
+#ifndef KERNEL_VERSION
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+#  if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8))
+#    include <linux/hardirq.h>
+#  else
+#    include <asm/hardirq.h>
+#  endif
+#elif defined(__KERNEL__)
+#  define PREEMPT_MASK  (0x000000FFUL)
+#  define preempt_count() (0UL)
+#endif
+
+#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __FUNCTION__ , ##args);
+
+#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __FUNCTION__ , ##args);
+
+#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __FUNCTION__ , ##args);
+
+#define WLAN_LOG_INFO(args... ) printk(KERN_INFO args)
+
+#if defined(WLAN_INCLUDE_DEBUG)
+	#define WLAN_ASSERT(c) if ((!(c)) && WLAN_DBVAR >= 1) { \
+		WLAN_LOG_DEBUG(1, "Assertion failure!\n"); }
+	#define WLAN_HEX_DUMP( l, x, p, n)	if( WLAN_DBVAR >= (l) ){ \
+		int __i__; \
+		printk(KERN_DEBUG x ":"); \
+		for( __i__=0; __i__ < (n); __i__++) \
+			printk( " %02x", ((UINT8*)(p))[__i__]); \
+		printk("\n"); }
+	#define DBFENTER { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"---->\n"); } }
+	#define DBFEXIT  { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"<----\n"); } }
+
+	#define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x ,  __FUNCTION__, (preempt_count() & PREEMPT_MASK), ##args );
+#else
+	#define WLAN_ASSERT(c)
+	#define WLAN_HEX_DUMP( l, s, p, n)
+	#define DBFENTER
+	#define DBFEXIT
+
+	#define WLAN_LOG_DEBUG(l, s, args...)
+#endif
+
+#ifdef CONFIG_SMP
+#define __SMP__			1
+#endif
+
+#if defined(__KERNEL__)
+
+#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) || (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)))
+#define URB_ONLY_CALLBACK
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+#define PT_REGS    , struct pt_regs *regs
+#else
+#define PT_REGS
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7))
+#  define del_singleshot_timer_sync(a)  del_timer_sync(a)
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,17))
+#define CONFIG_NETLINK		1
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
+#define kfree_s(a, b)	kfree((a))
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
+#ifndef init_waitqueue_head
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,0,16))
+#define init_waitqueue_head(p)  (*(p) = NULL)
+#else
+#define init_waitqueue_head(p)  init_waitqueue(p)
+#endif
+typedef struct wait_queue *wait_queue_head_t;
+typedef struct wait_queue wait_queue_t;
+#define set_current_state(b)  { current->state = (b); mb(); }
+#define init_waitqueue_entry(a, b) { (a)->task = current; }
+#endif
+#endif
+
+#ifndef wait_event_interruptible_timeout
+// retval == 0; signal met; we're good.
+// retval < 0; interrupted by signal.
+// retval > 0; timed out.
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))  // fixme?
+
+#define __wait_event_interruptible_timeout(wq, condition, ret)            \
+do {                                                                      \
+          wait_queue_t __wait;                                            \
+          init_waitqueue_entry(&__wait, current);                         \
+	                                                                  \
+          add_wait_queue(&wq, &__wait);                                   \
+          for (;;) {                                                      \
+                  set_current_state(TASK_INTERRUPTIBLE);                  \
+                  if (condition)                                          \
+                          break;                                          \
+                  if (!signal_pending(current)) {                         \
+                          ret = schedule_timeout(ret)    ;                \
+                          if (!ret)                                       \
+                                 break;                                   \
+                          continue;                                       \
+                  }                                                       \
+                  ret = -ERESTARTSYS;                                     \
+                  break;                                                  \
+          }                                                               \
+          set_current_state(TASK_RUNNING);                                \
+          remove_wait_queue(&wq, &__wait);                                \
+} while (0)
+
+#else // 2.2
+
+
+#define __wait_event_interruptible_timeout(wq, condition, ret)          \
+do {                                                                    \
+        struct wait_queue __wait;                                       \
+                                                                        \
+        __wait.task = current;                                          \
+        add_wait_queue(&wq, &__wait);                                   \
+        for (;;) {                                                      \
+                current->state = TASK_INTERRUPTIBLE;                    \
+                if (condition)                                          \
+                        break;                                          \
+                if (!signal_pending(current)) {                         \
+                        ret = schedule_timeout(ret);                    \
+                        if (!ret)                                       \
+                               break;                                   \
+                        continue;                                       \
+                }                                                       \
+                ret = -ERESTARTSYS;                                     \
+                break;                                                  \
+        }                                                               \
+        current->state = TASK_RUNNING;                                  \
+        remove_wait_queue(&wq, &__wait);                                \
+} while (0)
+
+#endif  // version >= 2.4
+
+#define wait_event_interruptible_timeout(wq, condition, timeout)	  \
+({									  \
+	long __ret = timeout;						  \
+	if (!(condition))						  \
+		__wait_event_interruptible_timeout(wq, condition, __ret); \
+	__ret;								  \
+})
+
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20))
+#ifdef _LINUX_LIST_H
+
+static inline void list_move_tail(struct list_head *list,
+          struct list_head *head)
+{
+        __list_del(list->prev, list->next);
+        list_add_tail(list, head);
+}
+
+static inline void __list_splice(struct list_head *list,
+				 struct list_head *head)
+{
+      struct list_head *first = list->next;
+      struct list_head *last = list->prev;
+      struct list_head *at = head->next;
+
+      first->prev = head;
+      head->next = first;
+
+      last->next = at;
+      at->prev = last;
+}
+
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+      __list_del(list->prev, list->next);
+      list_add(list, head);
+}
+
+static inline void list_splice_init(struct list_head *list,
+            struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+
+#endif  // LIST_H
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,1,90))
+#define spin_lock(l)            do { } while (0)
+#define spin_unlock(l)          do { } while (0)
+#define spin_lock_irqsave(l,f)  do { save_flags(f); cli(); } while (0)
+#define spin_unlock_irqrestore(l,f) do { restore_flags(f); } while (0)
+#define spin_lock_init(s)       do { } while (0)
+#define spin_trylock(l)         (1)
+typedef int spinlock_t;
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) // XXX ???
+#define spin_lock_bh         spin_lock
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+#ifdef CONFIG_SMP
+#define spin_is_locked(x)       (*(volatile char *)(&(x)->lock) <= 0)
+#else
+#define spin_is_locked(l)       (0)
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,28))
+#define __user
+#define __iomem
+#endif
+
+#ifdef _LINUX_PROC_FS_H
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,25))
+
+extern inline struct proc_dir_entry *
+create_proc_read_entry(const char *name, mode_t mode,
+                       struct proc_dir_entry *base,
+                       read_proc_t *read_proc, void *data)
+{
+    struct proc_dir_entry *res = create_proc_entry(name, mode, base);
+    if (res) {
+        res->read_proc = read_proc;
+        res->data = data;
+    }
+    return res;
+}
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,29))
+#ifndef proc_mkdir
+#define proc_mkdir(name, root) create_proc_entry(name, S_IFDIR, root)
+#endif
+#endif
+#endif /* _LINUX_PROC_FS_H */
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+#ifndef INIT_TQUEUE
+#define PREPARE_TQUEUE(_tq, _routine, _data)                    \
+        do {                                                    \
+                (_tq)->routine = _routine;                      \
+                (_tq)->data = _data;                            \
+        } while (0)
+#define INIT_TQUEUE(_tq, _routine, _data)                       \
+        do {                                                    \
+                INIT_LIST_HEAD(&(_tq)->list);                   \
+                (_tq)->sync = 0;                                \
+                PREPARE_TQUEUE((_tq), (_routine), (_data));     \
+        } while (0)
+#endif
+
+#ifndef container_of
+#define container_of(ptr, type, member) ({			\
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+#endif
+
+#ifndef INIT_WORK
+#define work_struct tq_struct
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+#define schedule_work(a)   queue_task(a, &tq_scheduler)
+#else
+#define schedule_work(a)  schedule_task(a)
+#endif
+
+#define flush_scheduled_work  flush_scheduled_tasks
+#define INIT_WORK2(_wq, _routine)  INIT_TQUEUE(_wq, (void (*)(void *))_routine, _wq)
+#endif
+
+#else // >= 2.5 kernel
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+#define INIT_WORK2(_wq, _routine)	INIT_WORK(_wq, (void (*)(void *))_routine, _wq)
+#else
+#define INIT_WORK2(_wq, _routine)	INIT_WORK(_wq, _routine)
+#endif
+
+#endif // >= 2.5 kernel
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,38))
+typedef struct device netdevice_t;
+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,4))
+typedef struct net_device netdevice_t;
+#else
+#undef netdevice_t
+typedef struct net_device netdevice_t;
+#endif
+
+#ifdef WIRELESS_EXT
+#if (WIRELESS_EXT < 13)
+struct iw_request_info
+{
+        __u16           cmd;            /* Wireless Extension command */
+        __u16           flags;          /* More to come ;-) */
+};
+#endif
+#endif
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,1,18))
+#define MODULE_PARM(a,b)        extern int __bogus_decl
+#define MODULE_AUTHOR(a)        extern int __bogus_decl
+#define MODULE_DESCRIPTION(a)   extern int __bogus_decl
+#define MODULE_SUPPORTED_DEVICE(a) extern int __bogus_decl
+#undef  GET_USE_COUNT
+#define GET_USE_COUNT(m)        mod_use_count_
+#endif
+
+#ifndef MODULE_OWNER
+#define MODULE_OWNER(a)         extern int __bogus_decl
+#define ANCIENT_MODULE_CODE
+#endif
+
+#ifndef MODULE_LICENSE
+#define MODULE_LICENSE(m)       extern int __bogus_decl
+#endif
+
+/* TODO:  Do we care about this? */
+#ifndef MODULE_DEVICE_TABLE
+#define MODULE_DEVICE_TABLE(foo,bar)
+#endif
+
+#define wlan_minutes2ticks(a) ((a)*(wlan_ticks_per_sec *  60))
+#define wlan_seconds2ticks(a) ((a)*(wlan_ticks_per_sec))
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,47))
+#define NEW_MODULE_CODE
+#ifdef ANCIENT_MODULE_CODE
+#undef ANCIENT_MODULE_CODE
+#endif
+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25))
+#define module_param(name, type, perm)                                       \
+        static inline void *__check_existence_##name(void) { return &name; } \
+        MODULE_PARM(name, _MODULE_PARM_STRING_ ## type)
+
+#define _MODULE_PARM_STRING_byte "b"
+#define _MODULE_PARM_STRING_short "h"
+#define _MODULE_PARM_STRING_ushort "h"
+#define _MODULE_PARM_STRING_int "i"
+#define _MODULE_PARM_STRING_uint "i"
+#define _MODULE_PARM_STRING_long "l"
+#define _MODULE_PARM_STRING_ulong "l"
+#define _MODULE_PARM_STRING_bool "i"
+#endif
+
+/* linux < 2.5.69 */
+#ifndef IRQ_NONE
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+
+#ifndef in_atomic
+#define in_atomic()  0
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+#define URB_ASYNC_UNLINK 0
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7))
+#define URB_ASYNC_UNLINK  USB_ASYNC_UNLINK
+#define usb_fill_bulk_urb  FILL_BULK_URB
+#define usb_kill_urb  usb_unlink_urb
+#else
+#define USB_QUEUE_BULK 0
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11))
+typedef u32 pm_message_t;
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9))
+#define hotplug_path  "/etc/hotplug/wlan.agent"
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+#define free_netdev(x)       kfree(x)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
+#define eth_hdr(x)           (x)->mac.ethernet
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+#define del_timer_sync(a)       del_timer(a)
+#endif
+
+#ifndef might_sleep
+#define might_sleep(a)   do { } while (0)
+#endif
+
+/* Apparently 2.4.2 ethtool is quite different, maybe newer too? */
+#if (defined(SIOETHTOOL) && !defined(ETHTOOL_GDRVINFO))
+#undef SIOETHTOOL
+#endif
+
+// pcmcia-cs stuff
+#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68)) && \
+     !defined(pcmcia_access_configuration_register))
+#define pcmcia_access_configuration_register(handle, reg) \
+        CardServices(AccessConfigurationRegister, handle, reg)
+#define pcmcia_register_client(handle, reg) \
+        CardServices(RegisterClient, handle, reg)
+#define pcmcia_deregister_client(handle) \
+        CardServices(DeregisterClient, handle)
+#define pcmcia_get_first_tuple(handle, tuple) \
+        CardServices(GetFirstTuple, handle, tuple)
+#define pcmcia_get_next_tuple(handle, tuple) \
+        CardServices(GetNextTuple, handle, tuple)
+#define pcmcia_get_tuple_data(handle, tuple) \
+        CardServices(GetTupleData, handle, tuple)
+#define pcmcia_parse_tuple(handle, tuple, parse) \
+        CardServices(ParseTuple, handle, tuple, parse)
+#define pcmcia_get_configuration_info(handle, config) \
+        CardServices(GetConfigurationInfo, handle, config)
+#define pcmcia_request_io(handle, req) \
+        CardServices(RequestIO, handle, req)
+#define pcmcia_request_irq(handle, req) \
+        CardServices(RequestIRQ, handle, req)
+#define pcmcia_request_configuration(handle, req) \
+        CardServices(RequestConfiguration, handle, req)
+#define pcmcia_release_configuration(handle) \
+        CardServices(ReleaseConfiguration, handle)
+#define pcmcia_release_io(handle, req) \
+        CardServices(ReleaseIO, handle, req)
+#define pcmcia_release_irq(handle, req) \
+        CardServices(ReleaseIRQ, handle, req)
+#define pcmcia_release_window(win) \
+        CardServices(ReleaseWindow, win)
+#define pcmcia_get_card_services_info(info) \
+        CardServices(GetCardServicesInfo, info)
+#define pcmcia_report_error(handle, err) \
+        CardServices(ReportError, handle, err)
+#endif
+
+#endif /* __KERNEL__ */
+
+/*=============================================================*/
+/*------ Hardware Portability Macros --------------------------*/
+/*=============================================================*/
+
+#define ieee2host16(n)	__le16_to_cpu(n)
+#define ieee2host32(n)	__le32_to_cpu(n)
+#define host2ieee16(n)	__cpu_to_le16(n)
+#define host2ieee32(n)	__cpu_to_le32(n)
+
+#if (WLAN_CPU_FAMILY != WLAN_MIPS)
+typedef UINT32 phys_t;
+#endif
+
+#if (WLAN_CPU_FAMILY == WLAN_PPC)
+       #define wlan_inw(a)                     in_be16((unsigned short *)((a)+_IO_BASE))
+       #define wlan_inw_le16_to_cpu(a)         inw((a))
+       #define wlan_outw(v,a)                  out_be16((unsigned short *)((a)+_IO_BASE), (v))
+       #define wlan_outw_cpu_to_le16(v,a)      outw((v),(a))
+#else
+       #define wlan_inw(a)                     inw((a))
+       #define wlan_inw_le16_to_cpu(a)         __cpu_to_le16(inw((a)))
+       #define wlan_outw(v,a)                  outw((v),(a))
+       #define wlan_outw_cpu_to_le16(v,a)      outw(__cpu_to_le16((v)),(a))
+#endif
+
+/*=============================================================*/
+/*--- General Macros ------------------------------------------*/
+/*=============================================================*/
+
+#define wlan_max(a, b) (((a) > (b)) ? (a) : (b))
+#define wlan_min(a, b) (((a) < (b)) ? (a) : (b))
+
+#define wlan_isprint(c)	(((c) > (0x19)) && ((c) < (0x7f)))
+
+#define wlan_hexchar(x) (((x) < 0x0a) ? ('0' + (x)) : ('a' + ((x) - 0x0a)))
+
+/* Create a string of printable chars from something that might not be */
+/* It's recommended that the str be 4*len + 1 bytes long */
+#define wlan_mkprintstr(buf, buflen, str, strlen) \
+{ \
+	int i = 0; \
+	int j = 0; \
+	memset(str, 0, (strlen)); \
+	for (i = 0; i < (buflen); i++) { \
+		if ( wlan_isprint((buf)[i]) ) { \
+			(str)[j] = (buf)[i]; \
+			j++; \
+		} else { \
+			(str)[j] = '\\'; \
+			(str)[j+1] = 'x'; \
+			(str)[j+2] = wlan_hexchar(((buf)[i] & 0xf0) >> 4); \
+			(str)[j+3] = wlan_hexchar(((buf)[i] & 0x0f)); \
+			j += 4; \
+		} \
+	} \
+}
+
+/*=============================================================*/
+/*--- Variables -----------------------------------------------*/
+/*=============================================================*/
+
+#ifdef WLAN_INCLUDE_DEBUG
+extern int wlan_debug;
+#endif
+
+extern int wlan_ethconv;		/* What's the default ethconv? */
+
+/*=============================================================*/
+/*--- Functions -----------------------------------------------*/
+/*=============================================================*/
+#endif /* _WLAN_COMPAT_H */
+