ARM: mvebu: move DT Dove to MVEBU

With all the DT support preparation done, we are able to move Dove
to MVEBU easily. Legacy non-DT mach-dove is left untouched to rot
for a while before removal.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 88010f97..548093b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -54,7 +54,7 @@
 	berlin2cd-google-chromecast.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-d2plug.dtb \
 	dove-d3plug.dtb \
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 0bc7cdf..d8c439c 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -20,18 +20,6 @@
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-config MACH_DOVE_DT
-	bool "Marvell Dove Flattened Device Tree"
-	select DOVE_CLK
-	select ORION_IRQCHIP
-	select ORION_TIMER
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	select USE_OF
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Dove using flattened device tree.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index cbc5c06..b608a21 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -2,5 +2,4 @@
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
-obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 4cfc4d8..4fecf5d 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -75,6 +75,18 @@
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada XP SoC with device tree.
 
+config MACH_DOVE
+	bool "Marvell Dove boards" if ARCH_MULTI_V7
+	select CACHE_L2X0
+	select CPU_PJ4
+	select DOVE_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PINCTRL_DOVE
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
 config MACH_KIRKWOOD
 	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
 	select ARCH_HAS_CPUFREQ
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index bbeb41e..a63e43b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -5,6 +5,7 @@
 
 obj-y				 += system-controller.o mvebu-soc-id.o
 obj-$(CONFIG_MACH_MVEBU_V7)      += board-v7.o
+obj-$(CONFIG_MACH_DOVE)		 += dove.o
 obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-mvebu/dove.c
similarity index 60%
rename from arch/arm/mach-dove/board-dt.c
rename to arch/arm/mach-mvebu/dove.c
index 49fa9ab..5e5a436 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-dove/board-dt.c
+ * arch/arm/mach-mvebu/dove.c
  *
  * Marvell Dove 88AP510 System On Chip FDT Board
  *
@@ -9,17 +9,14 @@
  */
 
 #include <linux/init.h>
-#include <linux/clk-provider.h>
+#include <linux/mbus.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
-#include <plat/common.h>
 #include "common.h"
 
-static void __init dove_dt_init(void)
+static void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
 
@@ -30,14 +27,13 @@
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char * const dove_dt_board_compat[] = {
+static const char * const dove_dt_compat[] = {
 	"marvell,dove",
 	NULL
 };
 
-DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
-	.map_io		= dove_map_io,
-	.init_machine	= dove_dt_init,
-	.restart	= dove_restart,
-	.dt_compat	= dove_dt_board_compat,
+DT_MACHINE_START(DOVE_DT, "Marvell Dove")
+	.init_machine	= dove_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= dove_dt_compat,
 MACHINE_END