| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2023, Linaro Limited |
| */ |
| |
| #include <dt-bindings/interconnect/qcom,icc.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/clock/qcom,sa8775p-gcc.h> |
| #include <dt-bindings/clock/qcom,sa8775p-gpucc.h> |
| #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> |
| #include <dt-bindings/mailbox/qcom-ipcc.h> |
| #include <dt-bindings/firmware/qcom,scm.h> |
| #include <dt-bindings/power/qcom,rpmhpd.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| clocks { |
| xo_board_clk: xo-board-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| L3_0: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_1>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_1: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x200>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_2>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_2: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x300>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_3>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_3: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU4: cpu@10000 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x10000>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| next-level-cache = <&L2_4>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_4: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_1>; |
| L3_1: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| |
| }; |
| }; |
| |
| CPU5: cpu@10100 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x10100>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| next-level-cache = <&L2_5>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_5: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_1>; |
| }; |
| }; |
| |
| CPU6: cpu@10200 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x10200>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| next-level-cache = <&L2_6>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_6: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_1>; |
| }; |
| }; |
| |
| CPU7: cpu@10300 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x10300>; |
| enable-method = "psci"; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| next-level-cache = <&L2_7>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| L2_7: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_1>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| GOLD_CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "gold-power-collapse"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <549>; |
| exit-latency-us = <901>; |
| min-residency-us = <1774>; |
| local-timer-stop; |
| }; |
| |
| GOLD_RAIL_CPU_SLEEP_0: cpu-sleep-1 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "gold-rail-power-collapse"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <702>; |
| exit-latency-us = <1061>; |
| min-residency-us = <4488>; |
| local-timer-stop; |
| }; |
| }; |
| |
| domain-idle-states { |
| CLUSTER_SLEEP_GOLD: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x41000044>; |
| entry-latency-us = <2752>; |
| exit-latency-us = <3048>; |
| min-residency-us = <6118>; |
| }; |
| |
| CLUSTER_SLEEP_APSS_RSC_PC: cluster-sleep-1 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x42000144>; |
| entry-latency-us = <3263>; |
| exit-latency-us = <6562>; |
| min-residency-us = <9987>; |
| }; |
| }; |
| }; |
| |
| dummy-sink { |
| compatible = "arm,coresight-dummy-sink"; |
| |
| in-ports { |
| port { |
| eud_in: endpoint { |
| remote-endpoint = |
| <&swao_rep_out1>; |
| }; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm { |
| compatible = "qcom,scm-sa8775p", "qcom,scm"; |
| memory-region = <&tz_ffi_mem>; |
| }; |
| }; |
| |
| aggre1_noc: interconnect-aggre1-noc { |
| compatible = "qcom,sa8775p-aggre1-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| aggre2_noc: interconnect-aggre2-noc { |
| compatible = "qcom,sa8775p-aggre2-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| clk_virt: interconnect-clk-virt { |
| compatible = "qcom,sa8775p-clk-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| config_noc: interconnect-config-noc { |
| compatible = "qcom,sa8775p-config-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| dc_noc: interconnect-dc-noc { |
| compatible = "qcom,sa8775p-dc-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| gem_noc: interconnect-gem-noc { |
| compatible = "qcom,sa8775p-gem-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| gpdsp_anoc: interconnect-gpdsp-anoc { |
| compatible = "qcom,sa8775p-gpdsp-anoc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| lpass_ag_noc: interconnect-lpass-ag-noc { |
| compatible = "qcom,sa8775p-lpass-ag-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mc_virt: interconnect-mc-virt { |
| compatible = "qcom,sa8775p-mc-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mmss_noc: interconnect-mmss-noc { |
| compatible = "qcom,sa8775p-mmss-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| nspa_noc: interconnect-nspa-noc { |
| compatible = "qcom,sa8775p-nspa-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| nspb_noc: interconnect-nspb-noc { |
| compatible = "qcom,sa8775p-nspb-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| pcie_anoc: interconnect-pcie-anoc { |
| compatible = "qcom,sa8775p-pcie-anoc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| system_noc: interconnect-system-noc { |
| compatible = "qcom,sa8775p-system-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| /* Will be updated by the bootloader. */ |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x0 0x0>; |
| }; |
| |
| qup_opp_table_100mhz: opp-table-qup100mhz { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| CPU_PD0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_0_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_0_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_0_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_0_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD4: power-domain-cpu4 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_1_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD5: power-domain-cpu5 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_1_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD6: power-domain-cpu6 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_1_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD7: power-domain-cpu7 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_1_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>, |
| <&GOLD_RAIL_CPU_SLEEP_0>; |
| }; |
| |
| CLUSTER_0_PD: power-domain-cluster0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_2_PD>; |
| domain-idle-states = <&CLUSTER_SLEEP_GOLD>; |
| }; |
| |
| CLUSTER_1_PD: power-domain-cluster1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_2_PD>; |
| domain-idle-states = <&CLUSTER_SLEEP_GOLD>; |
| }; |
| |
| CLUSTER_2_PD: power-domain-cluster2 { |
| #power-domain-cells = <0>; |
| domain-idle-states = <&CLUSTER_SLEEP_APSS_RSC_PC>; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| sail_ss_mem: sail-ss@80000000 { |
| reg = <0x0 0x80000000 0x0 0x10000000>; |
| no-map; |
| }; |
| |
| hyp_mem: hyp@90000000 { |
| reg = <0x0 0x90000000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| xbl_boot_mem: xbl-boot@90600000 { |
| reg = <0x0 0x90600000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| aop_image_mem: aop-image@90800000 { |
| reg = <0x0 0x90800000 0x0 0x60000>; |
| no-map; |
| }; |
| |
| aop_cmd_db_mem: aop-cmd-db@90860000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0x0 0x90860000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| uefi_log: uefi-log@908b0000 { |
| reg = <0x0 0x908b0000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| ddr_training_checksum: ddr-training-checksum@908c0000 { |
| reg = <0x0 0x908c0000 0x0 0x1000>; |
| no-map; |
| }; |
| |
| reserved_mem: reserved@908f0000 { |
| reg = <0x0 0x908f0000 0x0 0xe000>; |
| no-map; |
| }; |
| |
| secdata_apss_mem: secdata-apss@908fe000 { |
| reg = <0x0 0x908fe000 0x0 0x2000>; |
| no-map; |
| }; |
| |
| smem_mem: smem@90900000 { |
| compatible = "qcom,smem"; |
| reg = <0x0 0x90900000 0x0 0x200000>; |
| no-map; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| tz_sail_mailbox_mem: tz-sail-mailbox@90c00000 { |
| reg = <0x0 0x90c00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| sail_mailbox_mem: sail-ss@90d00000 { |
| reg = <0x0 0x90d00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| sail_ota_mem: sail-ss@90e00000 { |
| reg = <0x0 0x90e00000 0x0 0x300000>; |
| no-map; |
| }; |
| |
| aoss_backup_mem: aoss-backup@91b00000 { |
| reg = <0x0 0x91b00000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| cpucp_backup_mem: cpucp-backup@91b40000 { |
| reg = <0x0 0x91b40000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| tz_config_backup_mem: tz-config-backup@91b80000 { |
| reg = <0x0 0x91b80000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| ddr_training_data_mem: ddr-training-data@91b90000 { |
| reg = <0x0 0x91b90000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| cdt_data_backup_mem: cdt-data-backup@91ba0000 { |
| reg = <0x0 0x91ba0000 0x0 0x1000>; |
| no-map; |
| }; |
| |
| tz_ffi_mem: tz-ffi@91c00000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x91c00000 0x0 0x1400000>; |
| no-map; |
| }; |
| |
| lpass_machine_learning_mem: lpass-machine-learning@93b00000 { |
| reg = <0x0 0x93b00000 0x0 0xf00000>; |
| no-map; |
| }; |
| |
| adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 { |
| reg = <0x0 0x94a00000 0x0 0x800000>; |
| no-map; |
| }; |
| |
| pil_camera_mem: pil-camera@95200000 { |
| reg = <0x0 0x95200000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| pil_adsp_mem: pil-adsp@95c00000 { |
| reg = <0x0 0x95c00000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| pil_gdsp0_mem: pil-gdsp0@97b00000 { |
| reg = <0x0 0x97b00000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| pil_gdsp1_mem: pil-gdsp1@99900000 { |
| reg = <0x0 0x99900000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| pil_cdsp0_mem: pil-cdsp0@9b800000 { |
| reg = <0x0 0x9b800000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| pil_gpu_mem: pil-gpu@9d600000 { |
| reg = <0x0 0x9d600000 0x0 0x2000>; |
| no-map; |
| }; |
| |
| pil_cdsp1_mem: pil-cdsp1@9d700000 { |
| reg = <0x0 0x9d700000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| pil_cvp_mem: pil-cvp@9f500000 { |
| reg = <0x0 0x9f500000 0x0 0x700000>; |
| no-map; |
| }; |
| |
| pil_video_mem: pil-video@9fc00000 { |
| reg = <0x0 0x9fc00000 0x0 0x700000>; |
| no-map; |
| }; |
| |
| audio_mdf_mem: audio-mdf-region@ae000000 { |
| reg = <0x0 0xae000000 0x0 0x1000000>; |
| no-map; |
| }; |
| |
| firmware_mem: firmware-region@b0000000 { |
| reg = <0x0 0xb0000000 0x0 0x800000>; |
| no-map; |
| }; |
| |
| hyptz_reserved_mem: hyptz-reserved@beb00000 { |
| reg = <0x0 0xbeb00000 0x0 0x11500000>; |
| no-map; |
| }; |
| |
| scmi_mem: scmi-region@d0000000 { |
| reg = <0x0 0xd0000000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| firmware_logs_mem: firmware-logs@d0040000 { |
| reg = <0x0 0xd0040000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| firmware_audio_mem: firmware-audio@d0050000 { |
| reg = <0x0 0xd0050000 0x0 0x4000>; |
| no-map; |
| }; |
| |
| firmware_reserved_mem: firmware-reserved@d0054000 { |
| reg = <0x0 0xd0054000 0x0 0x9c000>; |
| no-map; |
| }; |
| |
| firmware_quantum_test_mem: firmware-quantum-test@d00f0000 { |
| reg = <0x0 0xd00f0000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| tags_mem: tags@d0100000 { |
| reg = <0x0 0xd0100000 0x0 0x1200000>; |
| no-map; |
| }; |
| |
| qtee_mem: qtee@d1300000 { |
| reg = <0x0 0xd1300000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| deepsleep_backup_mem: deepsleep-backup@d1800000 { |
| reg = <0x0 0xd1800000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| trusted_apps_mem: trusted-apps@d1900000 { |
| reg = <0x0 0xd1900000 0x0 0x3800000>; |
| no-map; |
| }; |
| |
| tz_stat_mem: tz-stat@db100000 { |
| reg = <0x0 0xdb100000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| cpucp_fw_mem: cpucp-fw@db200000 { |
| reg = <0x0 0xdb200000 0x0 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <443>, <429>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| smp2p_adsp_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_adsp_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-cdsp0 { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <94>, <432>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <5>; |
| |
| smp2p_cdsp0_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_cdsp0_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-cdsp1 { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <617>, <616>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <12>; |
| |
| smp2p_cdsp1_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_cdsp1_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-gpdsp0 { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <617>, <616>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <17>; |
| |
| smp2p_gpdsp0_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_gpdsp0_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-gpdsp1 { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <617>, <616>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1 |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <18>; |
| |
| smp2p_gpdsp1_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_gpdsp1_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0 0 0 0x10 0>; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,sa8775p-gcc"; |
| reg = <0x0 0x00100000 0x0 0xc7018>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&sleep_clk>, |
| <0>, |
| <0>, |
| <0>, |
| <&usb_0_qmpphy>, |
| <&usb_1_qmpphy>, |
| <0>, |
| <0>, |
| <0>, |
| <&pcie0_phy>, |
| <&pcie1_phy>, |
| <0>, |
| <0>, |
| <0>; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| }; |
| |
| ipcc: mailbox@408000 { |
| compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; |
| reg = <0x0 0x00408000 0x0 0x1000>; |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #mbox-cells = <2>; |
| }; |
| |
| qupv3_id_2: geniqup@8c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x008c0000 0x0 0x6000>; |
| ranges; |
| clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0x5a3 0x0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| status = "disabled"; |
| |
| i2c14: i2c@880000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x880000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi14: spi@880000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x880000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c15: i2c@884000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x884000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi15: spi@884000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x884000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c16: i2c@888000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x888000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi16: spi@888000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00888000 0x0 0x4000>; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c17: i2c@88c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x88c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi17: spi@88c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x88c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| uart17: serial@88c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x0088c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c18: i2c@890000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00890000 0x0 0x4000>; |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi18: spi@890000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x890000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c19: i2c@894000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x894000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi19: spi@894000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x894000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c20: i2c@898000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x898000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi20: spi@898000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x898000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| }; |
| |
| qupv3_id_0: geniqup@9c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x9c0000 0x0 0x6000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| clock-names = "m-ahb", "s-ahb"; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| iommus = <&apps_smmu 0x403 0x0>; |
| status = "disabled"; |
| |
| i2c0: i2c@980000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x980000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@980000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x980000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@984000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x984000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@984000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x984000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@988000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x988000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@988000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x988000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@98c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x98c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@98c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x98c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@990000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x990000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@990000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x990000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@994000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x994000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@994000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x994000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@994000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x994000 0x0 0x4000>; |
| interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| }; |
| |
| qupv3_id_1: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x00ac0000 0x0 0x6000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| clock-names = "m-ahb", "s-ahb"; |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| iommus = <&apps_smmu 0x443 0x0>; |
| status = "disabled"; |
| |
| i2c7: i2c@a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa80000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi7: spi@a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa80000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa84000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi8: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa84000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa88000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi9: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa88000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| uart9: serial@a88000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0xa88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa8c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi10: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa8c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| uart10: serial@a8c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x00a8c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| interconnect-names = "qup-core", "qup-config"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 |
| &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 |
| &config_noc SLAVE_QUP_1 0>; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| operating-points-v2 = <&qup_opp_table_100mhz>; |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa90000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi11: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa90000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa94000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi12: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa94000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| uart12: serial@a94000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x00a94000 0x0 0x4000>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", "qup-config"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa98000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| }; |
| |
| qupv3_id_3: geniqup@bc0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0xbc0000 0x0 0x6000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| clock-names = "m-ahb", "s-ahb"; |
| clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; |
| iommus = <&apps_smmu 0x43 0x0>; |
| status = "disabled"; |
| |
| i2c21: i2c@b80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xb80000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| |
| spi21: spi@b80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xb80000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SA8775P_CX>; |
| status = "disabled"; |
| }; |
| }; |
| |
| rng: rng@10d2000 { |
| compatible = "qcom,sa8775p-trng", "qcom,trng"; |
| reg = <0 0x010d2000 0 0x1000>; |
| }; |
| |
| ufs_mem_hc: ufs@1d84000 { |
| compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; |
| reg = <0x0 0x01d84000 0x0 0x3000>; |
| interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&ufs_mem_phy>; |
| phy-names = "ufsphy"; |
| lanes-per-direction = <2>; |
| #reset-cells = <1>; |
| resets = <&gcc GCC_UFS_PHY_BCR>; |
| reset-names = "rst"; |
| power-domains = <&gcc UFS_PHY_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| iommus = <&apps_smmu 0x100 0x0>; |
| dma-coherent; |
| clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_UFS_PHY_AHB_CLK>, |
| <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; |
| clock-names = "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "ref_clk", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk", |
| "rx_lane1_sync_clk"; |
| freq-table-hz = <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <0 0>, |
| <0 0>; |
| qcom,ice = <&ice>; |
| status = "disabled"; |
| }; |
| |
| ufs_mem_phy: phy@1d87000 { |
| compatible = "qcom,sa8775p-qmp-ufs-phy"; |
| reg = <0x0 0x01d87000 0x0 0xe10>; |
| /* |
| * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It |
| * enables the CXO clock to eDP *and* UFS PHY. |
| */ |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, |
| <&gcc GCC_EDP_REF_CLKREF_EN>; |
| clock-names = "ref", "ref_aux", "qref"; |
| power-domains = <&gcc UFS_PHY_GDSC>; |
| resets = <&ufs_mem_hc 0>; |
| reset-names = "ufsphy"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ice: crypto@1d88000 { |
| compatible = "qcom,sa8775p-inline-crypto-engine", |
| "qcom,inline-crypto-engine"; |
| reg = <0x0 0x01d88000 0x0 0x8000>; |
| clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; |
| }; |
| |
| stm: stm@4002000 { |
| compatible = "arm,coresight-stm", "arm,primecell"; |
| reg = <0x0 0x4002000 0x0 0x1000>, |
| <0x0 0x16280000 0x0 0x180000>; |
| reg-names = "stm-base", "stm-stimulus-base"; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| stm_out: endpoint { |
| remote-endpoint = |
| <&funnel0_in7>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@4003000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x4003000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <32>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| qdss_tpdm0_out: endpoint { |
| remote-endpoint = |
| <&qdss_tpda_in0>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpda@4004000 { |
| compatible = "qcom,coresight-tpda", "arm,primecell"; |
| reg = <0x0 0x4004000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| qdss_tpda_out: endpoint { |
| remote-endpoint = |
| <&funnel0_in6>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| qdss_tpda_in0: endpoint { |
| remote-endpoint = |
| <&qdss_tpdm0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| qdss_tpda_in1: endpoint { |
| remote-endpoint = |
| <&qdss_tpdm1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@400f000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x400f000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <32>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| qdss_tpdm1_out: endpoint { |
| remote-endpoint = |
| <&qdss_tpda_in1>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@4041000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x0 0x4041000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| funnel0_out: endpoint { |
| remote-endpoint = |
| <&qdss_funnel_in0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@6 { |
| reg = <6>; |
| funnel0_in6: endpoint { |
| remote-endpoint = |
| <&qdss_tpda_out>; |
| }; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| funnel0_in7: endpoint { |
| remote-endpoint = |
| <&stm_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@4042000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x0 0x4042000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| funnel1_out: endpoint { |
| remote-endpoint = |
| <&qdss_funnel_in1>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@4 { |
| reg = <4>; |
| funnel1_in4: endpoint { |
| remote-endpoint = |
| <&apss_funnel1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@4045000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x0 0x4045000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| qdss_funnel_out: endpoint { |
| remote-endpoint = |
| <&aoss_funnel_in7>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| qdss_funnel_in0: endpoint { |
| remote-endpoint = |
| <&funnel0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| qdss_funnel_in1: endpoint { |
| remote-endpoint = |
| <&funnel1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@4b04000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x0 0x4b04000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| aoss_funnel_out: endpoint { |
| remote-endpoint = |
| <&etf0_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@6 { |
| reg = <6>; |
| aoss_funnel_in6: endpoint { |
| remote-endpoint = |
| <&aoss_tpda_out>; |
| }; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| aoss_funnel_in7: endpoint { |
| remote-endpoint = |
| <&qdss_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| tmc_etf: tmc@4b05000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x0 0x4b05000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| etf0_out: endpoint { |
| remote-endpoint = |
| <&swao_rep_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| etf0_in: endpoint { |
| remote-endpoint = |
| <&aoss_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator@4b06000 { |
| compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| reg = <0x0 0x4b06000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@1 { |
| reg = <1>; |
| swao_rep_out1: endpoint { |
| remote-endpoint = |
| <&eud_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| swao_rep_in: endpoint { |
| remote-endpoint = |
| <&etf0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpda@4b08000 { |
| compatible = "qcom,coresight-tpda", "arm,primecell"; |
| reg = <0x0 0x4b08000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| aoss_tpda_out: endpoint { |
| remote-endpoint = |
| <&aoss_funnel_in6>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| aoss_tpda_in0: endpoint { |
| remote-endpoint = |
| <&aoss_tpdm0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| aoss_tpda_in1: endpoint { |
| remote-endpoint = |
| <&aoss_tpdm1_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| aoss_tpda_in2: endpoint { |
| remote-endpoint = |
| <&aoss_tpdm2_out>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| aoss_tpda_in3: endpoint { |
| remote-endpoint = |
| <&aoss_tpdm3_out>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| aoss_tpda_in4: endpoint { |
| remote-endpoint = |
| <&aoss_tpdm4_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@4b09000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x4b09000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <64>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| aoss_tpdm0_out: endpoint { |
| remote-endpoint = |
| <&aoss_tpda_in0>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@4b0a000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x4b0a000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <64>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| aoss_tpdm1_out: endpoint { |
| remote-endpoint = |
| <&aoss_tpda_in1>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@4b0b000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x4b0b000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <64>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| aoss_tpdm2_out: endpoint { |
| remote-endpoint = |
| <&aoss_tpda_in2>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@4b0c000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x4b0c000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <64>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| aoss_tpdm3_out: endpoint { |
| remote-endpoint = |
| <&aoss_tpda_in3>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@4b0d000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x4b0d000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,dsb-element-bits = <32>; |
| qcom,dsb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| aoss_tpdm4_out: endpoint { |
| remote-endpoint = |
| <&aoss_tpda_in4>; |
| }; |
| }; |
| }; |
| }; |
| |
| aoss_cti: cti@4b13000 { |
| compatible = "arm,coresight-cti", "arm,primecell"; |
| reg = <0x0 0x4b13000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| etm@6040000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6040000 0x0 0x1000>; |
| cpu = <&CPU0>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm0_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6140000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6140000 0x0 0x1000>; |
| cpu = <&CPU1>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm1_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in1>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6240000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6240000 0x0 0x1000>; |
| cpu = <&CPU2>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm2_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in2>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6340000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6340000 0x0 0x1000>; |
| cpu = <&CPU3>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm3_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in3>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6440000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6440000 0x0 0x1000>; |
| cpu = <&CPU4>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm4_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in4>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6540000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6540000 0x0 0x1000>; |
| cpu = <&CPU5>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm5_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in5>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6640000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6640000 0x0 0x1000>; |
| cpu = <&CPU6>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm6_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in6>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@6740000 { |
| compatible = "arm,primecell"; |
| reg = <0x0 0x6740000 0x0 0x1000>; |
| cpu = <&CPU7>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm7_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_in7>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@6800000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x0 0x6800000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| apss_funnel0_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel1_in0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| apss_funnel0_in0: endpoint { |
| remote-endpoint = |
| <&etm0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| apss_funnel0_in1: endpoint { |
| remote-endpoint = |
| <&etm1_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| apss_funnel0_in2: endpoint { |
| remote-endpoint = |
| <&etm2_out>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| apss_funnel0_in3: endpoint { |
| remote-endpoint = |
| <&etm3_out>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| apss_funnel0_in4: endpoint { |
| remote-endpoint = |
| <&etm4_out>; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| apss_funnel0_in5: endpoint { |
| remote-endpoint = |
| <&etm5_out>; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| apss_funnel0_in6: endpoint { |
| remote-endpoint = |
| <&etm6_out>; |
| }; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| apss_funnel0_in7: endpoint { |
| remote-endpoint = |
| <&etm7_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@6810000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x0 0x6810000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| apss_funnel1_out: endpoint { |
| remote-endpoint = |
| <&funnel1_in4>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| apss_funnel1_in0: endpoint { |
| remote-endpoint = |
| <&apss_funnel0_out>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| apss_funnel1_in3: endpoint { |
| remote-endpoint = |
| <&apss_tpda_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@6860000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x6860000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <64>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| apss_tpdm3_out: endpoint { |
| remote-endpoint = |
| <&apss_tpda_in3>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@6861000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x6861000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,dsb-element-bits = <32>; |
| qcom,dsb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| apss_tpdm4_out: endpoint { |
| remote-endpoint = |
| <&apss_tpda_in4>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpda@6863000 { |
| compatible = "qcom,coresight-tpda", "arm,primecell"; |
| reg = <0x0 0x6863000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| apss_tpda_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel1_in3>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| apss_tpda_in0: endpoint { |
| remote-endpoint = |
| <&apss_tpdm0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| apss_tpda_in1: endpoint { |
| remote-endpoint = |
| <&apss_tpdm1_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| apss_tpda_in2: endpoint { |
| remote-endpoint = |
| <&apss_tpdm2_out>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| apss_tpda_in3: endpoint { |
| remote-endpoint = |
| <&apss_tpdm3_out>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| apss_tpda_in4: endpoint { |
| remote-endpoint = |
| <&apss_tpdm4_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@68a0000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x68a0000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <32>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| apss_tpdm0_out: endpoint { |
| remote-endpoint = |
| <&apss_tpda_in0>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@68b0000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x68b0000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,cmb-element-bits = <32>; |
| qcom,cmb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| apss_tpdm1_out: endpoint { |
| remote-endpoint = |
| <&apss_tpda_in1>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpdm@68c0000 { |
| compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| reg = <0x0 0x68c0000 0x0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| qcom,dsb-element-bits = <32>; |
| qcom,dsb-msrs-num = <32>; |
| |
| out-ports { |
| port { |
| apss_tpdm2_out: endpoint { |
| remote-endpoint = |
| <&apss_tpda_in2>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_0_hsphy: phy@88e4000 { |
| compatible = "qcom,sa8775p-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e4000 0 0x120>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_0_qmpphy: phy@88e8000 { |
| compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; |
| reg = <0 0x088e8000 0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| <&gcc GCC_USB_CLKREF_EN>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "aux", "ref", "com_aux", "pipe"; |
| |
| resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, |
| <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; |
| reset-names = "phy", "phy_phy"; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb3_prim_phy_pipe_clk_src"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_0: usb@a6f8800 { |
| compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a6f8800 0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 14 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 15 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| wakeup-source; |
| |
| status = "disabled"; |
| |
| usb_0_dwc3: usb@a600000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a600000 0 0xe000>; |
| interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x080 0x0>; |
| phys = <&usb_0_hsphy>, <&usb_0_qmpphy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| |
| usb_1_hsphy: phy@88e6000 { |
| compatible = "qcom,sa8775p-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e6000 0 0x120>; |
| clocks = <&gcc GCC_USB_CLKREF_EN>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_USB2_PHY_SEC_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1_qmpphy: phy@88ea000 { |
| compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; |
| reg = <0 0x088ea000 0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, |
| <&gcc GCC_USB_CLKREF_EN>, |
| <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; |
| clock-names = "aux", "ref", "com_aux", "pipe"; |
| |
| resets = <&gcc GCC_USB3_PHY_SEC_BCR>, |
| <&gcc GCC_USB3PHY_PHY_SEC_BCR>; |
| reset-names = "phy", "phy_phy"; |
| |
| power-domains = <&gcc USB30_SEC_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb3_sec_phy_pipe_clk_src"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1: usb@a8f8800 { |
| compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a8f8800 0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_SLEEP_CLK>, |
| <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 8 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 7 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc USB30_SEC_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_SEC_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| wakeup-source; |
| |
| status = "disabled"; |
| |
| usb_1_dwc3: usb@a800000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a800000 0 0xe000>; |
| interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x0a0 0x0>; |
| phys = <&usb_1_hsphy>, <&usb_1_qmpphy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| |
| usb_2_hsphy: phy@88e7000 { |
| compatible = "qcom,sa8775p-usb-hs-phy", |
| "qcom,usb-snps-hs-5nm-phy"; |
| reg = <0 0x088e7000 0 0x120>; |
| clocks = <&gcc GCC_USB_CLKREF_EN>; |
| clock-names = "ref"; |
| resets = <&gcc GCC_USB3_PHY_TERT_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2: usb@a4f8800 { |
| compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a4f8800 0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, |
| <&gcc GCC_USB20_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, |
| <&gcc GCC_USB20_SLEEP_CLK>, |
| <&gcc GCC_USB20_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB20_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 10 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 9 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq"; |
| |
| power-domains = <&gcc USB20_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB20_PRIM_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| wakeup-source; |
| |
| status = "disabled"; |
| |
| usb_2_dwc3: usb@a400000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a400000 0 0xe000>; |
| interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x020 0x0>; |
| phys = <&usb_2_hsphy>; |
| phy-names = "usb2-phy"; |
| }; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x0 0x01f40000 0x0 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| gpucc: clock-controller@3d90000 { |
| compatible = "qcom,sa8775p-gpucc"; |
| reg = <0x0 0x03d90000 0x0 0xa000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| clock-names = "bi_tcxo", |
| "gcc_gpu_gpll0_clk_src", |
| "gcc_gpu_gpll0_div_clk_src"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| adreno_smmu: iommu@3da0000 { |
| compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu", |
| "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x03da0000 0x0 0x20000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| dma-coherent; |
| power-domains = <&gpucc GPU_CC_CX_GDSC>; |
| clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>, |
| <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, |
| <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| <&gpucc GPU_CC_HUB_AON_CLK>; |
| clock-names = "gcc_gpu_memnoc_gfx_clk", |
| "gcc_gpu_snoc_dvm_gfx_clk", |
| "gpu_cc_ahb_clk", |
| "gpu_cc_hlos1_vote_gpu_smmu_clk", |
| "gpu_cc_cx_gmu_clk", |
| "gpu_cc_hub_cx_int_clk", |
| "gpu_cc_hub_aon_clk"; |
| interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| serdes0: phy@8901000 { |
| compatible = "qcom,sa8775p-dwmac-sgmii-phy"; |
| reg = <0x0 0x08901000 0x0 0xe10>; |
| clocks = <&gcc GCC_SGMI_CLKREF_EN>; |
| clock-names = "sgmi_ref"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| serdes1: phy@8902000 { |
| compatible = "qcom,sa8775p-dwmac-sgmii-phy"; |
| reg = <0x0 0x08902000 0x0 0xe10>; |
| clocks = <&gcc GCC_SGMI_CLKREF_EN>; |
| clock-names = "sgmi_ref"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pmu@9091000 { |
| compatible = "qcom,sa8775p-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; |
| reg = <0x0 0x9091000 0x0 0x1000>; |
| interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>; |
| interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&llcc_bwmon_opp_table>; |
| |
| llcc_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <762000>; |
| }; |
| |
| opp-1 { |
| opp-peak-kBps = <1720000>; |
| }; |
| |
| opp-2 { |
| opp-peak-kBps = <2086000>; |
| }; |
| |
| opp-3 { |
| opp-peak-kBps = <2601000>; |
| }; |
| |
| opp-4 { |
| opp-peak-kBps = <2929000>; |
| }; |
| |
| opp-5 { |
| opp-peak-kBps = <5931000>; |
| }; |
| |
| opp-6 { |
| opp-peak-kBps = <6515000>; |
| }; |
| |
| opp-7 { |
| opp-peak-kBps = <7984000>; |
| }; |
| |
| opp-8 { |
| opp-peak-kBps = <10437000>; |
| }; |
| |
| opp-9 { |
| opp-peak-kBps = <12195000>; |
| }; |
| }; |
| }; |
| |
| pmu@90b5400 { |
| compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0x0 0x90b5400 0x0 0x600>; |
| interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| |
| cpu_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <9155000>; |
| }; |
| |
| opp-1 { |
| opp-peak-kBps = <12298000>; |
| }; |
| |
| opp-2 { |
| opp-peak-kBps = <14236000>; |
| }; |
| |
| opp-3 { |
| opp-peak-kBps = <16265000>; |
| }; |
| }; |
| |
| }; |
| |
| pmu@90b6400 { |
| compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0x0 0x90b6400 0x0 0x600>; |
| interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| }; |
| |
| llcc: system-cache-controller@9200000 { |
| compatible = "qcom,sa8775p-llcc"; |
| reg = <0x0 0x09200000 0x0 0x80000>, |
| <0x0 0x09300000 0x0 0x80000>, |
| <0x0 0x09400000 0x0 0x80000>, |
| <0x0 0x09500000 0x0 0x80000>, |
| <0x0 0x09600000 0x0 0x80000>, |
| <0x0 0x09700000 0x0 0x80000>, |
| <0x0 0x09a00000 0x0 0x80000>; |
| reg-names = "llcc0_base", |
| "llcc1_base", |
| "llcc2_base", |
| "llcc3_base", |
| "llcc4_base", |
| "llcc5_base", |
| "llcc_broadcast_base"; |
| interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,sa8775p-pdc", "qcom,pdc"; |
| reg = <0x0 0x0b220000 0x0 0x30000>, |
| <0x0 0x17c000f0 0x0 0x64>; |
| qcom,pdc-ranges = <0 480 40>, |
| <40 140 14>, |
| <54 263 1>, |
| <55 306 4>, |
| <59 312 3>, |
| <62 374 2>, |
| <64 434 2>, |
| <66 438 2>, |
| <70 520 1>, |
| <73 523 1>, |
| <118 568 6>, |
| <124 609 3>, |
| <159 638 1>, |
| <160 720 3>, |
| <169 728 30>, |
| <199 416 2>, |
| <201 449 1>, |
| <202 89 1>, |
| <203 451 1>, |
| <204 462 1>, |
| <205 264 1>, |
| <206 579 1>, |
| <207 653 1>, |
| <208 656 1>, |
| <209 659 1>, |
| <210 122 1>, |
| <211 699 1>, |
| <212 705 1>, |
| <213 450 1>, |
| <214 643 2>, |
| <216 646 5>, |
| <221 390 5>, |
| <226 700 2>, |
| <228 440 1>, |
| <229 663 1>, |
| <230 524 2>, |
| <232 612 3>, |
| <235 723 5>; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| }; |
| |
| tsens2: thermal-sensor@c251000 { |
| compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c251000 0x0 0x1ff>, |
| <0x0 0x0c224000 0x0 0x8>; |
| interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>; |
| #qcom,sensors = <13>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens3: thermal-sensor@c252000 { |
| compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c252000 0x0 0x1ff>, |
| <0x0 0x0c225000 0x0 0x8>; |
| interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>; |
| #qcom,sensors = <13>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens0: thermal-sensor@c263000 { |
| compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c263000 0x0 0x1ff>, |
| <0x0 0x0c222000 0x0 0x8>; |
| interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; |
| #qcom,sensors = <12>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal-sensor@c265000 { |
| compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c265000 0x0 0x1ff>, |
| <0x0 0x0c223000 0x0 0x8>; |
| interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; |
| #qcom,sensors = <12>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| aoss_qmp: power-management@c300000 { |
| compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; |
| reg = <0x0 0x0c300000 0x0 0x400>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_AOP |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| #clock-cells = <0>; |
| }; |
| |
| sram@c3f0000 { |
| compatible = "qcom,rpmh-stats"; |
| reg = <0x0 0x0c3f0000 0x0 0x400>; |
| }; |
| |
| spmi_bus: spmi@c440000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0 0x0c440000 0x0 0x1100>, |
| <0x0 0x0c600000 0x0 0x2000000>, |
| <0x0 0x0e600000 0x0 0x100000>, |
| <0x0 0x0e700000 0x0 0xa0000>, |
| <0x0 0x0c40a000 0x0 0x26000>; |
| reg-names = "core", |
| "chnls", |
| "obsrvr", |
| "intr", |
| "cnfg"; |
| qcom,channel = <0>; |
| qcom,ee = <0>; |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| tlmm: pinctrl@f000000 { |
| compatible = "qcom,sa8775p-tlmm"; |
| reg = <0x0 0x0f000000 0x0 0x1000000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 149>; |
| wakeup-parent = <&pdc>; |
| }; |
| |
| sram: sram@146d8000 { |
| compatible = "qcom,sa8775p-imem", "syscon", "simple-mfd"; |
| reg = <0x0 0x146d8000 0x0 0x1000>; |
| ranges = <0x0 0x0 0x146d8000 0x1000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pil-reloc@94c { |
| compatible = "qcom,pil-reloc-info"; |
| reg = <0x94c 0xc8>; |
| }; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x15000000 0x0 0x100000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| dma-coherent; |
| |
| interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pcie_smmu: iommu@15200000 { |
| compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x15200000 0x0 0x80000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| dma-coherent; |
| |
| interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| intc: interrupt-controller@17a00000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ |
| <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0x0 0x20000>; |
| }; |
| |
| watchdog@17c10000 { |
| compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; |
| reg = <0x0 0x17c10000 0x0 0x1000>; |
| clocks = <&sleep_clk>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| memtimer: timer@17c20000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x17c20000 0x0 0x1000>; |
| ranges = <0x0 0x0 0x0 0x20000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| frame@17c21000 { |
| reg = <0x17c21000 0x1000>, |
| <0x17c22000 0x1000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <0>; |
| }; |
| |
| frame@17c23000 { |
| reg = <0x17c23000 0x1000>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <1>; |
| status = "disabled"; |
| }; |
| |
| frame@17c25000 { |
| reg = <0x17c25000 0x1000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <2>; |
| status = "disabled"; |
| }; |
| |
| frame@17c27000 { |
| reg = <0x17c27000 0x1000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <3>; |
| status = "disabled"; |
| }; |
| |
| frame@17c29000 { |
| reg = <0x17c29000 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <4>; |
| status = "disabled"; |
| }; |
| |
| frame@17c2b000 { |
| reg = <0x17c2b000 0x1000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <5>; |
| status = "disabled"; |
| }; |
| |
| frame@17c2d000 { |
| reg = <0x17c2d000 0x1000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <6>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@18200000 { |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0x0 0x18200000 0x0 0x10000>, |
| <0x0 0x18210000 0x0 0x10000>, |
| <0x0 0x18220000 0x0 0x10000>; |
| reg-names = "drv-0", "drv-1", "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 2>, |
| <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, |
| <CONTROL_TCS 0>; |
| label = "apps_rsc"; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,sa8775p-rpmh-clk"; |
| #clock-cells = <1>; |
| clock-names = "xo"; |
| clocks = <&xo_board_clk>; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,sa8775p-rpmhpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp-0 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_min_svs: opp-1 { |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp2 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_svs: opp3 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp-4 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_nom: opp-5 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp-6 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_nom_l2: opp-7 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| }; |
| |
| rpmhpd_opp_turbo: opp-8 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp-9 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpufreq_hw: cpufreq@18591000 { |
| compatible = "qcom,sa8775p-cpufreq-epss", |
| "qcom,cpufreq-epss"; |
| reg = <0x0 0x18591000 0x0 0x1000>, |
| <0x0 0x18593000 0x0 0x1000>; |
| reg-names = "freq-domain0", "freq-domain1"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| |
| #freq-domain-cells = <1>; |
| }; |
| |
| remoteproc_gpdsp0: remoteproc@20c00000 { |
| compatible = "qcom,sa8775p-gpdsp0-pas"; |
| reg = <0x0 0x20c00000 0x0 0x10000>; |
| |
| interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_gpdsp0_in 0 0>, |
| <&smp2p_gpdsp0_in 2 0>, |
| <&smp2p_gpdsp0_in 1 0>, |
| <&smp2p_gpdsp0_in 3 0>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>, |
| <&rpmhpd RPMHPD_MXC>; |
| power-domain-names = "cx", "mxc"; |
| |
| interconnects = <&gpdsp_anoc MASTER_DSP0 0 |
| &config_noc SLAVE_CLK_CTL 0>; |
| |
| memory-region = <&pil_gdsp0_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_gpdsp0_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_GPDSP0 |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "gpdsp0"; |
| qcom,remote-pid = <17>; |
| }; |
| }; |
| |
| remoteproc_gpdsp1: remoteproc@21c00000 { |
| compatible = "qcom,sa8775p-gpdsp1-pas"; |
| reg = <0x0 0x21c00000 0x0 0x10000>; |
| |
| interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_gpdsp1_in 0 0>, |
| <&smp2p_gpdsp1_in 2 0>, |
| <&smp2p_gpdsp1_in 1 0>, |
| <&smp2p_gpdsp1_in 3 0>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>, |
| <&rpmhpd RPMHPD_MXC>; |
| power-domain-names = "cx", "mxc"; |
| |
| interconnects = <&gpdsp_anoc MASTER_DSP1 0 |
| &config_noc SLAVE_CLK_CTL 0>; |
| |
| memory-region = <&pil_gdsp1_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_gpdsp1_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1 |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_GPDSP1 |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "gpdsp1"; |
| qcom,remote-pid = <18>; |
| }; |
| }; |
| |
| ethernet1: ethernet@23000000 { |
| compatible = "qcom,sa8775p-ethqos"; |
| reg = <0x0 0x23000000 0x0 0x10000>, |
| <0x0 0x23016000 0x0 0x100>; |
| reg-names = "stmmaceth", "rgmii"; |
| |
| interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "sfty"; |
| |
| clocks = <&gcc GCC_EMAC1_AXI_CLK>, |
| <&gcc GCC_EMAC1_SLV_AHB_CLK>, |
| <&gcc GCC_EMAC1_PTP_CLK>, |
| <&gcc GCC_EMAC1_PHY_AUX_CLK>; |
| clock-names = "stmmaceth", |
| "pclk", |
| "ptp_ref", |
| "phyaux"; |
| |
| interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "mac-mem", "cpu-mac"; |
| |
| power-domains = <&gcc EMAC1_GDSC>; |
| |
| phys = <&serdes1>; |
| phy-names = "serdes"; |
| |
| iommus = <&apps_smmu 0x140 0xf>; |
| dma-coherent; |
| |
| snps,tso; |
| snps,pbl = <32>; |
| rx-fifo-depth = <16384>; |
| tx-fifo-depth = <16384>; |
| |
| status = "disabled"; |
| }; |
| |
| ethernet0: ethernet@23040000 { |
| compatible = "qcom,sa8775p-ethqos"; |
| reg = <0x0 0x23040000 0x0 0x10000>, |
| <0x0 0x23056000 0x0 0x100>; |
| reg-names = "stmmaceth", "rgmii"; |
| |
| interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "sfty"; |
| |
| clocks = <&gcc GCC_EMAC0_AXI_CLK>, |
| <&gcc GCC_EMAC0_SLV_AHB_CLK>, |
| <&gcc GCC_EMAC0_PTP_CLK>, |
| <&gcc GCC_EMAC0_PHY_AUX_CLK>; |
| clock-names = "stmmaceth", |
| "pclk", |
| "ptp_ref", |
| "phyaux"; |
| |
| interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "mac-mem", "cpu-mac"; |
| |
| power-domains = <&gcc EMAC0_GDSC>; |
| |
| phys = <&serdes0>; |
| phy-names = "serdes"; |
| |
| iommus = <&apps_smmu 0x120 0xf>; |
| dma-coherent; |
| |
| snps,tso; |
| snps,pbl = <32>; |
| rx-fifo-depth = <16384>; |
| tx-fifo-depth = <16384>; |
| |
| status = "disabled"; |
| }; |
| |
| remoteproc_cdsp0: remoteproc@26300000 { |
| compatible = "qcom,sa8775p-cdsp0-pas"; |
| reg = <0x0 0x26300000 0x0 0x10000>; |
| |
| interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>, |
| <&rpmhpd RPMHPD_MXC>, |
| <&rpmhpd RPMHPD_NSP0>; |
| power-domain-names = "cx", "mxc", "nsp"; |
| |
| interconnects = <&nspa_noc MASTER_CDSP_PROC 0 |
| &mc_virt SLAVE_EBI1 0>; |
| |
| memory-region = <&pil_cdsp0_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_cdsp0_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "cdsp"; |
| qcom,remote-pid = <5>; |
| |
| fastrpc { |
| compatible = "qcom,fastrpc"; |
| qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| label = "cdsp"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compute-cb@1 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <1>; |
| iommus = <&apps_smmu 0x2141 0x04a0>, |
| <&apps_smmu 0x2161 0x04a0>, |
| <&apps_smmu 0x2181 0x0400>, |
| <&apps_smmu 0x21c1 0x04a0>, |
| <&apps_smmu 0x21e1 0x04a0>, |
| <&apps_smmu 0x2541 0x04a0>, |
| <&apps_smmu 0x2561 0x04a0>, |
| <&apps_smmu 0x2581 0x0400>, |
| <&apps_smmu 0x25c1 0x04a0>, |
| <&apps_smmu 0x25e1 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@2 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <2>; |
| iommus = <&apps_smmu 0x2142 0x04a0>, |
| <&apps_smmu 0x2162 0x04a0>, |
| <&apps_smmu 0x2182 0x0400>, |
| <&apps_smmu 0x21c2 0x04a0>, |
| <&apps_smmu 0x21e2 0x04a0>, |
| <&apps_smmu 0x2542 0x04a0>, |
| <&apps_smmu 0x2562 0x04a0>, |
| <&apps_smmu 0x2582 0x0400>, |
| <&apps_smmu 0x25c2 0x04a0>, |
| <&apps_smmu 0x25e2 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@3 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <3>; |
| iommus = <&apps_smmu 0x2143 0x04a0>, |
| <&apps_smmu 0x2163 0x04a0>, |
| <&apps_smmu 0x2183 0x0400>, |
| <&apps_smmu 0x21c3 0x04a0>, |
| <&apps_smmu 0x21e3 0x04a0>, |
| <&apps_smmu 0x2543 0x04a0>, |
| <&apps_smmu 0x2563 0x04a0>, |
| <&apps_smmu 0x2583 0x0400>, |
| <&apps_smmu 0x25c3 0x04a0>, |
| <&apps_smmu 0x25e3 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@4 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <4>; |
| iommus = <&apps_smmu 0x2144 0x04a0>, |
| <&apps_smmu 0x2164 0x04a0>, |
| <&apps_smmu 0x2184 0x0400>, |
| <&apps_smmu 0x21c4 0x04a0>, |
| <&apps_smmu 0x21e4 0x04a0>, |
| <&apps_smmu 0x2544 0x04a0>, |
| <&apps_smmu 0x2564 0x04a0>, |
| <&apps_smmu 0x2584 0x0400>, |
| <&apps_smmu 0x25c4 0x04a0>, |
| <&apps_smmu 0x25e4 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@5 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <5>; |
| iommus = <&apps_smmu 0x2145 0x04a0>, |
| <&apps_smmu 0x2165 0x04a0>, |
| <&apps_smmu 0x2185 0x0400>, |
| <&apps_smmu 0x21c5 0x04a0>, |
| <&apps_smmu 0x21e5 0x04a0>, |
| <&apps_smmu 0x2545 0x04a0>, |
| <&apps_smmu 0x2565 0x04a0>, |
| <&apps_smmu 0x2585 0x0400>, |
| <&apps_smmu 0x25c5 0x04a0>, |
| <&apps_smmu 0x25e5 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@6 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <6>; |
| iommus = <&apps_smmu 0x2146 0x04a0>, |
| <&apps_smmu 0x2166 0x04a0>, |
| <&apps_smmu 0x2186 0x0400>, |
| <&apps_smmu 0x21c6 0x04a0>, |
| <&apps_smmu 0x21e6 0x04a0>, |
| <&apps_smmu 0x2546 0x04a0>, |
| <&apps_smmu 0x2566 0x04a0>, |
| <&apps_smmu 0x2586 0x0400>, |
| <&apps_smmu 0x25c6 0x04a0>, |
| <&apps_smmu 0x25e6 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@7 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <7>; |
| iommus = <&apps_smmu 0x2147 0x04a0>, |
| <&apps_smmu 0x2167 0x04a0>, |
| <&apps_smmu 0x2187 0x0400>, |
| <&apps_smmu 0x21c7 0x04a0>, |
| <&apps_smmu 0x21e7 0x04a0>, |
| <&apps_smmu 0x2547 0x04a0>, |
| <&apps_smmu 0x2567 0x04a0>, |
| <&apps_smmu 0x2587 0x0400>, |
| <&apps_smmu 0x25c7 0x04a0>, |
| <&apps_smmu 0x25e7 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@8 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <8>; |
| iommus = <&apps_smmu 0x2148 0x04a0>, |
| <&apps_smmu 0x2168 0x04a0>, |
| <&apps_smmu 0x2188 0x0400>, |
| <&apps_smmu 0x21c8 0x04a0>, |
| <&apps_smmu 0x21e8 0x04a0>, |
| <&apps_smmu 0x2548 0x04a0>, |
| <&apps_smmu 0x2568 0x04a0>, |
| <&apps_smmu 0x2588 0x0400>, |
| <&apps_smmu 0x25c8 0x04a0>, |
| <&apps_smmu 0x25e8 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@9 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <9>; |
| iommus = <&apps_smmu 0x2149 0x04a0>, |
| <&apps_smmu 0x2169 0x04a0>, |
| <&apps_smmu 0x2189 0x0400>, |
| <&apps_smmu 0x21c9 0x04a0>, |
| <&apps_smmu 0x21e9 0x04a0>, |
| <&apps_smmu 0x2549 0x04a0>, |
| <&apps_smmu 0x2569 0x04a0>, |
| <&apps_smmu 0x2589 0x0400>, |
| <&apps_smmu 0x25c9 0x04a0>, |
| <&apps_smmu 0x25e9 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@10 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <10>; |
| iommus = <&apps_smmu 0x214a 0x04a0>, |
| <&apps_smmu 0x216a 0x04a0>, |
| <&apps_smmu 0x218a 0x0400>, |
| <&apps_smmu 0x21ca 0x04a0>, |
| <&apps_smmu 0x21ea 0x04a0>, |
| <&apps_smmu 0x254a 0x04a0>, |
| <&apps_smmu 0x256a 0x04a0>, |
| <&apps_smmu 0x258a 0x0400>, |
| <&apps_smmu 0x25ca 0x04a0>, |
| <&apps_smmu 0x25ea 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@11 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <11>; |
| iommus = <&apps_smmu 0x214b 0x04a0>, |
| <&apps_smmu 0x216b 0x04a0>, |
| <&apps_smmu 0x218b 0x0400>, |
| <&apps_smmu 0x21cb 0x04a0>, |
| <&apps_smmu 0x21eb 0x04a0>, |
| <&apps_smmu 0x254b 0x04a0>, |
| <&apps_smmu 0x256b 0x04a0>, |
| <&apps_smmu 0x258b 0x0400>, |
| <&apps_smmu 0x25cb 0x04a0>, |
| <&apps_smmu 0x25eb 0x04a0>; |
| dma-coherent; |
| }; |
| }; |
| }; |
| }; |
| |
| remoteproc_cdsp1: remoteproc@2a300000 { |
| compatible = "qcom,sa8775p-cdsp1-pas"; |
| reg = <0x0 0x2A300000 0x0 0x10000>; |
| |
| interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>, |
| <&rpmhpd RPMHPD_MXC>, |
| <&rpmhpd RPMHPD_NSP1>; |
| power-domain-names = "cx", "mxc", "nsp"; |
| |
| interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 |
| &mc_virt SLAVE_EBI1 0>; |
| |
| memory-region = <&pil_cdsp1_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_cdsp1_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_NSP1 |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "cdsp"; |
| qcom,remote-pid = <12>; |
| |
| fastrpc { |
| compatible = "qcom,fastrpc"; |
| qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| label = "cdsp1"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compute-cb@1 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <1>; |
| iommus = <&apps_smmu 0x2941 0x04a0>, |
| <&apps_smmu 0x2961 0x04a0>, |
| <&apps_smmu 0x2981 0x0400>, |
| <&apps_smmu 0x29c1 0x04a0>, |
| <&apps_smmu 0x29e1 0x04a0>, |
| <&apps_smmu 0x2d41 0x04a0>, |
| <&apps_smmu 0x2d61 0x04a0>, |
| <&apps_smmu 0x2d81 0x0400>, |
| <&apps_smmu 0x2dc1 0x04a0>, |
| <&apps_smmu 0x2de1 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@2 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <2>; |
| iommus = <&apps_smmu 0x2942 0x04a0>, |
| <&apps_smmu 0x2962 0x04a0>, |
| <&apps_smmu 0x2982 0x0400>, |
| <&apps_smmu 0x29c2 0x04a0>, |
| <&apps_smmu 0x29e2 0x04a0>, |
| <&apps_smmu 0x2d42 0x04a0>, |
| <&apps_smmu 0x2d62 0x04a0>, |
| <&apps_smmu 0x2d82 0x0400>, |
| <&apps_smmu 0x2dc2 0x04a0>, |
| <&apps_smmu 0x2de2 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@3 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <3>; |
| iommus = <&apps_smmu 0x2943 0x04a0>, |
| <&apps_smmu 0x2963 0x04a0>, |
| <&apps_smmu 0x2983 0x0400>, |
| <&apps_smmu 0x29c3 0x04a0>, |
| <&apps_smmu 0x29e3 0x04a0>, |
| <&apps_smmu 0x2d43 0x04a0>, |
| <&apps_smmu 0x2d63 0x04a0>, |
| <&apps_smmu 0x2d83 0x0400>, |
| <&apps_smmu 0x2dc3 0x04a0>, |
| <&apps_smmu 0x2de3 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@4 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <4>; |
| iommus = <&apps_smmu 0x2944 0x04a0>, |
| <&apps_smmu 0x2964 0x04a0>, |
| <&apps_smmu 0x2984 0x0400>, |
| <&apps_smmu 0x29c4 0x04a0>, |
| <&apps_smmu 0x29e4 0x04a0>, |
| <&apps_smmu 0x2d44 0x04a0>, |
| <&apps_smmu 0x2d64 0x04a0>, |
| <&apps_smmu 0x2d84 0x0400>, |
| <&apps_smmu 0x2dc4 0x04a0>, |
| <&apps_smmu 0x2de4 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@5 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <5>; |
| iommus = <&apps_smmu 0x2945 0x04a0>, |
| <&apps_smmu 0x2965 0x04a0>, |
| <&apps_smmu 0x2985 0x0400>, |
| <&apps_smmu 0x29c5 0x04a0>, |
| <&apps_smmu 0x29e5 0x04a0>, |
| <&apps_smmu 0x2d45 0x04a0>, |
| <&apps_smmu 0x2d65 0x04a0>, |
| <&apps_smmu 0x2d85 0x0400>, |
| <&apps_smmu 0x2dc5 0x04a0>, |
| <&apps_smmu 0x2de5 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@6 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <6>; |
| iommus = <&apps_smmu 0x2946 0x04a0>, |
| <&apps_smmu 0x2966 0x04a0>, |
| <&apps_smmu 0x2986 0x0400>, |
| <&apps_smmu 0x29c6 0x04a0>, |
| <&apps_smmu 0x29e6 0x04a0>, |
| <&apps_smmu 0x2d46 0x04a0>, |
| <&apps_smmu 0x2d66 0x04a0>, |
| <&apps_smmu 0x2d86 0x0400>, |
| <&apps_smmu 0x2dc6 0x04a0>, |
| <&apps_smmu 0x2de6 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@7 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <7>; |
| iommus = <&apps_smmu 0x2947 0x04a0>, |
| <&apps_smmu 0x2967 0x04a0>, |
| <&apps_smmu 0x2987 0x0400>, |
| <&apps_smmu 0x29c7 0x04a0>, |
| <&apps_smmu 0x29e7 0x04a0>, |
| <&apps_smmu 0x2d47 0x04a0>, |
| <&apps_smmu 0x2d67 0x04a0>, |
| <&apps_smmu 0x2d87 0x0400>, |
| <&apps_smmu 0x2dc7 0x04a0>, |
| <&apps_smmu 0x2de7 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@8 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <8>; |
| iommus = <&apps_smmu 0x2948 0x04a0>, |
| <&apps_smmu 0x2968 0x04a0>, |
| <&apps_smmu 0x2988 0x0400>, |
| <&apps_smmu 0x29c8 0x04a0>, |
| <&apps_smmu 0x29e8 0x04a0>, |
| <&apps_smmu 0x2d48 0x04a0>, |
| <&apps_smmu 0x2d68 0x04a0>, |
| <&apps_smmu 0x2d88 0x0400>, |
| <&apps_smmu 0x2dc8 0x04a0>, |
| <&apps_smmu 0x2de8 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@9 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <9>; |
| iommus = <&apps_smmu 0x2949 0x04a0>, |
| <&apps_smmu 0x2969 0x04a0>, |
| <&apps_smmu 0x2989 0x0400>, |
| <&apps_smmu 0x29c9 0x04a0>, |
| <&apps_smmu 0x29e9 0x04a0>, |
| <&apps_smmu 0x2d49 0x04a0>, |
| <&apps_smmu 0x2d69 0x04a0>, |
| <&apps_smmu 0x2d89 0x0400>, |
| <&apps_smmu 0x2dc9 0x04a0>, |
| <&apps_smmu 0x2de9 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@10 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <10>; |
| iommus = <&apps_smmu 0x294a 0x04a0>, |
| <&apps_smmu 0x296a 0x04a0>, |
| <&apps_smmu 0x298a 0x0400>, |
| <&apps_smmu 0x29ca 0x04a0>, |
| <&apps_smmu 0x29ea 0x04a0>, |
| <&apps_smmu 0x2d4a 0x04a0>, |
| <&apps_smmu 0x2d6a 0x04a0>, |
| <&apps_smmu 0x2d8a 0x0400>, |
| <&apps_smmu 0x2dca 0x04a0>, |
| <&apps_smmu 0x2dea 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@11 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <11>; |
| iommus = <&apps_smmu 0x294b 0x04a0>, |
| <&apps_smmu 0x296b 0x04a0>, |
| <&apps_smmu 0x298b 0x0400>, |
| <&apps_smmu 0x29cb 0x04a0>, |
| <&apps_smmu 0x29eb 0x04a0>, |
| <&apps_smmu 0x2d4b 0x04a0>, |
| <&apps_smmu 0x2d6b 0x04a0>, |
| <&apps_smmu 0x2d8b 0x0400>, |
| <&apps_smmu 0x2dcb 0x04a0>, |
| <&apps_smmu 0x2deb 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@12 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <12>; |
| iommus = <&apps_smmu 0x294c 0x04a0>, |
| <&apps_smmu 0x296c 0x04a0>, |
| <&apps_smmu 0x298c 0x0400>, |
| <&apps_smmu 0x29cc 0x04a0>, |
| <&apps_smmu 0x29ec 0x04a0>, |
| <&apps_smmu 0x2d4c 0x04a0>, |
| <&apps_smmu 0x2d6c 0x04a0>, |
| <&apps_smmu 0x2d8c 0x0400>, |
| <&apps_smmu 0x2dcc 0x04a0>, |
| <&apps_smmu 0x2dec 0x04a0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@13 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <13>; |
| iommus = <&apps_smmu 0x294d 0x04a0>, |
| <&apps_smmu 0x296d 0x04a0>, |
| <&apps_smmu 0x298d 0x0400>, |
| <&apps_smmu 0x29Cd 0x04a0>, |
| <&apps_smmu 0x29ed 0x04a0>, |
| <&apps_smmu 0x2d4d 0x04a0>, |
| <&apps_smmu 0x2d6d 0x04a0>, |
| <&apps_smmu 0x2d8d 0x0400>, |
| <&apps_smmu 0x2dcd 0x04a0>, |
| <&apps_smmu 0x2ded 0x04a0>; |
| dma-coherent; |
| }; |
| }; |
| }; |
| }; |
| |
| remoteproc_adsp: remoteproc@30000000 { |
| compatible = "qcom,sa8775p-adsp-pas"; |
| reg = <0x0 0x30000000 0x0 0x100>; |
| |
| interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", "handover", |
| "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd RPMHPD_LCX>, |
| <&rpmhpd RPMHPD_LMX>; |
| power-domain-names = "lcx", "lmx"; |
| |
| interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; |
| |
| memory-region = <&pil_adsp_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_adsp_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| remoteproc_adsp_glink: glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "lpass"; |
| qcom,remote-pid = <2>; |
| |
| fastrpc { |
| compatible = "qcom,fastrpc"; |
| qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| label = "adsp"; |
| memory-region = <&adsp_rpc_remote_heap_mem>; |
| qcom,vmids = <QCOM_SCM_VMID_LPASS |
| QCOM_SCM_VMID_ADSP_HEAP>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compute-cb@3 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <3>; |
| iommus = <&apps_smmu 0x3003 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@4 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <4>; |
| iommus = <&apps_smmu 0x3004 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@5 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <5>; |
| iommus = <&apps_smmu 0x3005 0x0>; |
| qcom,nsessions = <5>; |
| dma-coherent; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| thermal-zones { |
| aoss-0-thermal { |
| thermal-sensors = <&tsens0 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-0-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-1-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-2-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-3-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| gpuss-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| gpuss-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| gpuss-2-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| audio-thermal { |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| camss-0-thermal { |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pcie-0-thermal { |
| thermal-sensors = <&tsens0 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpuss-0-0-thermal { |
| thermal-sensors = <&tsens0 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| aoss-1-thermal { |
| thermal-sensors = <&tsens1 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-0-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-1-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-2-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-0-3-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| gpuss-3-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| gpuss-4-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| gpuss-5-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| video-thermal { |
| thermal-sensors = <&tsens1 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| camss-1-thermal { |
| thermal-sensors = <&tsens1 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pcie-1-thermal { |
| thermal-sensors = <&tsens1 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpuss-0-1-thermal { |
| thermal-sensors = <&tsens1 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| aoss-2-thermal { |
| thermal-sensors = <&tsens2 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-0-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-1-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-2-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-3-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-0-0-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-0-1-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-0-2-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-1-0-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-1-1-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-1-2-0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| ddrss-0-thermal { |
| thermal-sensors = <&tsens2 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpuss-1-0-thermal { |
| thermal-sensors = <&tsens2 12>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| aoss-3-thermal { |
| thermal-sensors = <&tsens3 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-0-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-1-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-2-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpu-1-3-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-0-0-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-0-1-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-0-2-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-1-0-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-1-1-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| nsp-1-2-1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens3 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| ddrss-1-thermal { |
| thermal-sensors = <&tsens3 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| cpuss-1-1-thermal { |
| thermal-sensors = <&tsens3 12>; |
| |
| trips { |
| trip-point0 { |
| temperature = <105000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <115000>; |
| hysteresis = <5000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |
| |
| arch_timer: timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pcie0: pcie@1c00000 { |
| compatible = "qcom,pcie-sa8775p"; |
| reg = <0x0 0x01c00000 0x0 0x3000>, |
| <0x0 0x40000000 0x0 0xf20>, |
| <0x0 0x40000f20 0x0 0xa8>, |
| <0x0 0x40001000 0x0 0x4000>, |
| <0x0 0x40100000 0x0 0x100000>, |
| <0x0 0x01c03000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| device_type = "pci"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, |
| <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <0>; |
| num-lanes = <2>; |
| |
| interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3", |
| "msi4", "msi5", "msi6", "msi7"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; |
| |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, |
| <0x100 &pcie_smmu 0x0001 0x1>; |
| |
| resets = <&gcc GCC_PCIE_0_BCR>; |
| reset-names = "pci"; |
| power-domains = <&gcc PCIE_0_GDSC>; |
| |
| phys = <&pcie0_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| |
| pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie0_ep: pcie-ep@1c00000 { |
| compatible = "qcom,sa8775p-pcie-ep"; |
| reg = <0x0 0x01c00000 0x0 0x3000>, |
| <0x0 0x40000000 0x0 0xf20>, |
| <0x0 0x40000f20 0x0 0xa8>, |
| <0x0 0x40001000 0x0 0x4000>, |
| <0x0 0x40200000 0x0 0x100000>, |
| <0x0 0x01c03000 0x0 0x1000>, |
| <0x0 0x40005000 0x0 0x2000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "addr_space", |
| "mmio", "dma"; |
| |
| clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; |
| |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a"; |
| |
| interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interrupt-names = "global", "doorbell", "dma"; |
| |
| interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| dma-coherent; |
| iommus = <&pcie_smmu 0x0000 0x7f>; |
| resets = <&gcc GCC_PCIE_0_BCR>; |
| reset-names = "core"; |
| power-domains = <&gcc PCIE_0_GDSC>; |
| phys = <&pcie0_phy>; |
| phy-names = "pciephy"; |
| max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ |
| num-lanes = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie0_phy: phy@1c04000 { |
| compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy"; |
| reg = <0x0 0x1c04000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_CLKREF_EN>, |
| <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_0_PIPE_CLK>, |
| <&gcc GCC_PCIE_0_PIPEDIV2_CLK>, |
| <&gcc GCC_PCIE_0_PHY_AUX_CLK>; |
| |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe", |
| "pipediv2", "phy_aux"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| resets = <&gcc GCC_PCIE_0_PHY_BCR>; |
| reset-names = "phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_0_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@1c10000 { |
| compatible = "qcom,pcie-sa8775p"; |
| reg = <0x0 0x01c10000 0x0 0x3000>, |
| <0x0 0x60000000 0x0 0xf20>, |
| <0x0 0x60000f20 0x0 0xa8>, |
| <0x0 0x60001000 0x0 0x4000>, |
| <0x0 0x60100000 0x0 0x100000>, |
| <0x0 0x01c13000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| device_type = "pci"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, |
| <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <1>; |
| num-lanes = <4>; |
| |
| interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", "msi1", "msi2", "msi3", |
| "msi4", "msi5", "msi6", "msi7"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_1_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; |
| |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| iommu-map = <0x0 &pcie_smmu 0x0080 0x1>, |
| <0x100 &pcie_smmu 0x0081 0x1>; |
| |
| resets = <&gcc GCC_PCIE_1_BCR>; |
| reset-names = "pci"; |
| power-domains = <&gcc PCIE_1_GDSC>; |
| |
| phys = <&pcie1_phy>; |
| phy-names = "pciephy"; |
| |
| status = "disabled"; |
| |
| pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie1_ep: pcie-ep@1c10000 { |
| compatible = "qcom,sa8775p-pcie-ep"; |
| reg = <0x0 0x01c10000 0x0 0x3000>, |
| <0x0 0x60000000 0x0 0xf20>, |
| <0x0 0x60000f20 0x0 0xa8>, |
| <0x0 0x60001000 0x0 0x4000>, |
| <0x0 0x60200000 0x0 0x100000>, |
| <0x0 0x01c13000 0x0 0x1000>, |
| <0x0 0x60005000 0x0 0x2000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "addr_space", |
| "mmio", "dma"; |
| |
| clocks = <&gcc GCC_PCIE_1_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; |
| |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a"; |
| |
| interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interrupt-names = "global", "doorbell", "dma"; |
| |
| interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| dma-coherent; |
| iommus = <&pcie_smmu 0x80 0x7f>; |
| resets = <&gcc GCC_PCIE_1_BCR>; |
| reset-names = "core"; |
| power-domains = <&gcc PCIE_1_GDSC>; |
| phys = <&pcie1_phy>; |
| phy-names = "pciephy"; |
| max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ |
| num-lanes = <4>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie1_phy: phy@1c14000 { |
| compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; |
| reg = <0x0 0x1c14000 0x0 0x4000>; |
| |
| clocks = <&gcc GCC_PCIE_1_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_CLKREF_EN>, |
| <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_1_PIPE_CLK>, |
| <&gcc GCC_PCIE_1_PIPEDIV2_CLK>, |
| <&gcc GCC_PCIE_1_PHY_AUX_CLK>; |
| |
| clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe", |
| "pipediv2", "phy_aux"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| resets = <&gcc GCC_PCIE_1_PHY_BCR>; |
| reset-names = "phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie_1_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |