// SPDX-License-Identifier: BSD-3-Clause
/*
 * sc7280 SoC device tree source
 *
 * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
 */
#include <dt-bindings/clock/qcom,camcc-sc7280.h>
#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7280.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	aliases {
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		i2c4 = &i2c4;
		i2c5 = &i2c5;
		i2c6 = &i2c6;
		i2c7 = &i2c7;
		i2c8 = &i2c8;
		i2c9 = &i2c9;
		i2c10 = &i2c10;
		i2c11 = &i2c11;
		i2c12 = &i2c12;
		i2c13 = &i2c13;
		i2c14 = &i2c14;
		i2c15 = &i2c15;
		mmc1 = &sdhc_1;
		mmc2 = &sdhc_2;
		spi0 = &spi0;
		spi1 = &spi1;
		spi2 = &spi2;
		spi3 = &spi3;
		spi4 = &spi4;
		spi5 = &spi5;
		spi6 = &spi6;
		spi7 = &spi7;
		spi8 = &spi8;
		spi9 = &spi9;
		spi10 = &spi10;
		spi11 = &spi11;
		spi12 = &spi12;
		spi13 = &spi13;
		spi14 = &spi14;
		spi15 = &spi15;
	};

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			clock-frequency = <76800000>;
			#clock-cells = <0>;
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			clock-frequency = <32000>;
			#clock-cells = <0>;
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		wlan_ce_mem: wlan-ce@4cd000 {
			no-map;
			reg = <0x0 0x004cd000 0x0 0x1000>;
		};

		hyp_mem: hyp@80000000 {
			reg = <0x0 0x80000000 0x0 0x600000>;
			no-map;
		};

		xbl_mem: xbl@80600000 {
			reg = <0x0 0x80600000 0x0 0x200000>;
			no-map;
		};

		aop_mem: aop@80800000 {
			reg = <0x0 0x80800000 0x0 0x60000>;
			no-map;
		};

		aop_cmd_db_mem: aop-cmd-db@80860000 {
			reg = <0x0 0x80860000 0x0 0x20000>;
			compatible = "qcom,cmd-db";
			no-map;
		};

		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
			reg = <0x0 0x80884000 0x0 0x10000>;
			no-map;
		};

		sec_apps_mem: sec-apps@808ff000 {
			reg = <0x0 0x808ff000 0x0 0x1000>;
			no-map;
		};

		smem_mem: smem@80900000 {
			reg = <0x0 0x80900000 0x0 0x200000>;
			no-map;
		};

		cpucp_mem: cpucp@80b00000 {
			no-map;
			reg = <0x0 0x80b00000 0x0 0x100000>;
		};

		wlan_fw_mem: wlan-fw@80c00000 {
			reg = <0x0 0x80c00000 0x0 0xc00000>;
			no-map;
		};

		adsp_mem: adsp@86700000 {
			reg = <0x0 0x86700000 0x0 0x2800000>;
			no-map;
		};

		video_mem: video@8b200000 {
			reg = <0x0 0x8b200000 0x0 0x500000>;
			no-map;
		};

		cdsp_mem: cdsp@88f00000 {
			reg = <0x0 0x88f00000 0x0 0x1e00000>;
			no-map;
		};

		ipa_fw_mem: ipa-fw@8b700000 {
			reg = <0 0x8b700000 0 0x10000>;
			no-map;
		};

		gpu_zap_mem: zap@8b71a000 {
			reg = <0 0x8b71a000 0 0x2000>;
			no-map;
		};

		mpss_mem: mpss@8b800000 {
			reg = <0x0 0x8b800000 0x0 0xf600000>;
			no-map;
		};

		wpss_mem: wpss@9ae00000 {
			reg = <0x0 0x9ae00000 0x0 0x1900000>;
			no-map;
		};

		rmtfs_mem: rmtfs@9c900000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x9c900000 0x0 0x280000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		CPU0: cpu@0 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x0>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			power-domains = <&CPU_PD0>;
			power-domain-names = "psci";
			next-level-cache = <&L2_0>;
			operating-points-v2 = <&cpu0_opp_table>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			L2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
				L3_0: l3-cache {
					compatible = "cache";
					cache-level = <3>;
					cache-unified;
				};
			};
		};

		CPU1: cpu@100 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x100>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			power-domains = <&CPU_PD1>;
			power-domain-names = "psci";
			next-level-cache = <&L2_100>;
			operating-points-v2 = <&cpu0_opp_table>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			L2_100: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		CPU2: cpu@200 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x200>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			power-domains = <&CPU_PD2>;
			power-domain-names = "psci";
			next-level-cache = <&L2_200>;
			operating-points-v2 = <&cpu0_opp_table>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			L2_200: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		CPU3: cpu@300 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x300>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			power-domains = <&CPU_PD3>;
			power-domain-names = "psci";
			next-level-cache = <&L2_300>;
			operating-points-v2 = <&cpu0_opp_table>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			L2_300: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		CPU4: cpu@400 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x400>;
			clocks = <&cpufreq_hw 1>;
			enable-method = "psci";
			power-domains = <&CPU_PD4>;
			power-domain-names = "psci";
			next-level-cache = <&L2_400>;
			operating-points-v2 = <&cpu4_opp_table>;
			capacity-dmips-mhz = <1946>;
			dynamic-power-coefficient = <520>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;
			L2_400: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		CPU5: cpu@500 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x500>;
			clocks = <&cpufreq_hw 1>;
			enable-method = "psci";
			power-domains = <&CPU_PD5>;
			power-domain-names = "psci";
			next-level-cache = <&L2_500>;
			operating-points-v2 = <&cpu4_opp_table>;
			capacity-dmips-mhz = <1946>;
			dynamic-power-coefficient = <520>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;
			L2_500: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		CPU6: cpu@600 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x600>;
			clocks = <&cpufreq_hw 1>;
			enable-method = "psci";
			power-domains = <&CPU_PD6>;
			power-domain-names = "psci";
			next-level-cache = <&L2_600>;
			operating-points-v2 = <&cpu4_opp_table>;
			capacity-dmips-mhz = <1946>;
			dynamic-power-coefficient = <520>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;
			L2_600: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		CPU7: cpu@700 {
			device_type = "cpu";
			compatible = "qcom,kryo";
			reg = <0x0 0x700>;
			clocks = <&cpufreq_hw 2>;
			enable-method = "psci";
			power-domains = <&CPU_PD7>;
			power-domain-names = "psci";
			next-level-cache = <&L2_700>;
			operating-points-v2 = <&cpu7_opp_table>;
			capacity-dmips-mhz = <1985>;
			dynamic-power-coefficient = <552>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
			qcom,freq-domain = <&cpufreq_hw 2>;
			#cooling-cells = <2>;
			L2_700: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&L3_0>;
			};
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};

				core4 {
					cpu = <&CPU4>;
				};

				core5 {
					cpu = <&CPU5>;
				};

				core6 {
					cpu = <&CPU6>;
				};

				core7 {
					cpu = <&CPU7>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "little-power-down";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <549>;
				exit-latency-us = <901>;
				min-residency-us = <1774>;
				local-timer-stop;
			};

			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "little-rail-power-down";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <702>;
				exit-latency-us = <915>;
				min-residency-us = <4001>;
				local-timer-stop;
			};

			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "big-power-down";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <523>;
				exit-latency-us = <1244>;
				min-residency-us = <2207>;
				local-timer-stop;
			};

			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "big-rail-power-down";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <526>;
				exit-latency-us = <1854>;
				min-residency-us = <5555>;
				local-timer-stop;
			};
		};

		domain_idle_states: domain-idle-states {
			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x41000044>;
				entry-latency-us = <2752>;
				exit-latency-us = <3048>;
				min-residency-us = <6118>;
			};

			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x41001344>;
				entry-latency-us = <3263>;
				exit-latency-us = <4562>;
				min-residency-us = <8467>;
			};

			CLUSTER_SLEEP_LLCC_OFF: cluster-sleep-2 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x4100b344>;
				entry-latency-us = <3638>;
				exit-latency-us = <6562>;
				min-residency-us = <9826>;
			};
		};
	};

	cpu0_opp_table: opp-table-cpu0 {
		compatible = "operating-points-v2";
		opp-shared;

		cpu0_opp_300mhz: opp-300000000 {
			opp-hz = /bits/ 64 <300000000>;
			opp-peak-kBps = <800000 9600000>;
		};

		cpu0_opp_691mhz: opp-691200000 {
			opp-hz = /bits/ 64 <691200000>;
			opp-peak-kBps = <800000 17817600>;
		};

		cpu0_opp_806mhz: opp-806400000 {
			opp-hz = /bits/ 64 <806400000>;
			opp-peak-kBps = <800000 20889600>;
		};

		cpu0_opp_941mhz: opp-940800000 {
			opp-hz = /bits/ 64 <940800000>;
			opp-peak-kBps = <1804000 24576000>;
		};

		cpu0_opp_1152mhz: opp-1152000000 {
			opp-hz = /bits/ 64 <1152000000>;
			opp-peak-kBps = <2188000 27033600>;
		};

		cpu0_opp_1325mhz: opp-1324800000 {
			opp-hz = /bits/ 64 <1324800000>;
			opp-peak-kBps = <2188000 33792000>;
		};

		cpu0_opp_1517mhz: opp-1516800000 {
			opp-hz = /bits/ 64 <1516800000>;
			opp-peak-kBps = <3072000 38092800>;
		};

		cpu0_opp_1651mhz: opp-1651200000 {
			opp-hz = /bits/ 64 <1651200000>;
			opp-peak-kBps = <3072000 41779200>;
		};

		cpu0_opp_1805mhz: opp-1804800000 {
			opp-hz = /bits/ 64 <1804800000>;
			opp-peak-kBps = <4068000 48537600>;
		};

		cpu0_opp_1958mhz: opp-1958400000 {
			opp-hz = /bits/ 64 <1958400000>;
			opp-peak-kBps = <4068000 48537600>;
		};

		cpu0_opp_2016mhz: opp-2016000000 {
			opp-hz = /bits/ 64 <2016000000>;
			opp-peak-kBps = <6220000 48537600>;
		};
	};

	cpu4_opp_table: opp-table-cpu4 {
		compatible = "operating-points-v2";
		opp-shared;

		cpu4_opp_691mhz: opp-691200000 {
			opp-hz = /bits/ 64 <691200000>;
			opp-peak-kBps = <1804000 9600000>;
		};

		cpu4_opp_941mhz: opp-940800000 {
			opp-hz = /bits/ 64 <940800000>;
			opp-peak-kBps = <2188000 17817600>;
		};

		cpu4_opp_1229mhz: opp-1228800000 {
			opp-hz = /bits/ 64 <1228800000>;
			opp-peak-kBps = <4068000 24576000>;
		};

		cpu4_opp_1344mhz: opp-1344000000 {
			opp-hz = /bits/ 64 <1344000000>;
			opp-peak-kBps = <4068000 24576000>;
		};

		cpu4_opp_1517mhz: opp-1516800000 {
			opp-hz = /bits/ 64 <1516800000>;
			opp-peak-kBps = <4068000 24576000>;
		};

		cpu4_opp_1651mhz: opp-1651200000 {
			opp-hz = /bits/ 64 <1651200000>;
			opp-peak-kBps = <6220000 38092800>;
		};

		cpu4_opp_1901mhz: opp-1900800000 {
			opp-hz = /bits/ 64 <1900800000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu4_opp_2054mhz: opp-2054400000 {
			opp-hz = /bits/ 64 <2054400000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu4_opp_2112mhz: opp-2112000000 {
			opp-hz = /bits/ 64 <2112000000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu4_opp_2131mhz: opp-2131200000 {
			opp-hz = /bits/ 64 <2131200000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu4_opp_2208mhz: opp-2208000000 {
			opp-hz = /bits/ 64 <2208000000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu4_opp_2400mhz: opp-2400000000 {
			opp-hz = /bits/ 64 <2400000000>;
			opp-peak-kBps = <8532000 48537600>;
		};

		cpu4_opp_2611mhz: opp-2611200000 {
			opp-hz = /bits/ 64 <2611200000>;
			opp-peak-kBps = <8532000 48537600>;
		};
	};

	cpu7_opp_table: opp-table-cpu7 {
		compatible = "operating-points-v2";
		opp-shared;

		cpu7_opp_806mhz: opp-806400000 {
			opp-hz = /bits/ 64 <806400000>;
			opp-peak-kBps = <1804000 9600000>;
		};

		cpu7_opp_1056mhz: opp-1056000000 {
			opp-hz = /bits/ 64 <1056000000>;
			opp-peak-kBps = <2188000 17817600>;
		};

		cpu7_opp_1325mhz: opp-1324800000 {
			opp-hz = /bits/ 64 <1324800000>;
			opp-peak-kBps = <4068000 24576000>;
		};

		cpu7_opp_1517mhz: opp-1516800000 {
			opp-hz = /bits/ 64 <1516800000>;
			opp-peak-kBps = <4068000 24576000>;
		};

		cpu7_opp_1766mhz: opp-1766400000 {
			opp-hz = /bits/ 64 <1766400000>;
			opp-peak-kBps = <6220000 38092800>;
		};

		cpu7_opp_1862mhz: opp-1862400000 {
			opp-hz = /bits/ 64 <1862400000>;
			opp-peak-kBps = <6220000 38092800>;
		};

		cpu7_opp_2035mhz: opp-2035200000 {
			opp-hz = /bits/ 64 <2035200000>;
			opp-peak-kBps = <6220000 38092800>;
		};

		cpu7_opp_2112mhz: opp-2112000000 {
			opp-hz = /bits/ 64 <2112000000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu7_opp_2208mhz: opp-2208000000 {
			opp-hz = /bits/ 64 <2208000000>;
			opp-peak-kBps = <6220000 44851200>;
		};

		cpu7_opp_2381mhz: opp-2380800000 {
			opp-hz = /bits/ 64 <2380800000>;
			opp-peak-kBps = <6832000 44851200>;
		};

		cpu7_opp_2400mhz: opp-2400000000 {
			opp-hz = /bits/ 64 <2400000000>;
			opp-peak-kBps = <8532000 48537600>;
		};

		cpu7_opp_2515mhz: opp-2515200000 {
			opp-hz = /bits/ 64 <2515200000>;
			opp-peak-kBps = <8532000 48537600>;
		};

		cpu7_opp_2707mhz: opp-2707200000 {
			opp-hz = /bits/ 64 <2707200000>;
			opp-peak-kBps = <8532000 48537600>;
		};

		cpu7_opp_3014mhz: opp-3014400000 {
			opp-hz = /bits/ 64 <3014400000>;
			opp-peak-kBps = <8532000 48537600>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0 0x80000000 0 0>;
	};

	firmware {
		scm: scm {
			compatible = "qcom,scm-sc7280", "qcom,scm";
			qcom,dload-mode = <&tcsr_2 0x13000>;
		};
	};

	clk_virt: interconnect {
		compatible = "qcom,sc7280-clk-virt";
		#interconnect-cells = <2>;
		qcom,bcm-voters = <&apps_bcm_voter>;
	};

	smem {
		compatible = "qcom,smem";
		memory-region = <&smem_mem>;
		hwlocks = <&tcsr_mutex 3>;
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;
		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_LPASS
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-cdsp {
		compatible = "qcom,smp2p";
		qcom,smem = <94>, <432>;
		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_CDSP
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <5>;

		cdsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		cdsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-mpss {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;
		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_MPSS
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		ipa_smp2p_out: ipa-ap-to-modem {
			qcom,entry-name = "ipa";
			#qcom,smem-state-cells = <1>;
		};

		ipa_smp2p_in: ipa-modem-to-ap {
			qcom,entry-name = "ipa";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-wpss {
		compatible = "qcom,smp2p";
		qcom,smem = <617>, <616>;
		interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_WPSS
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <13>;

		wpss_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		wpss_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		wlan_smp2p_out: wlan-ap-to-wpss {
			qcom,entry-name = "wlan";
			#qcom,smem-state-cells = <1>;
		};

		wlan_smp2p_in: wlan-wpss-to-ap {
			qcom,entry-name = "wlan";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";

		CPU_PD0: power-domain-cpu0 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
		};

		CPU_PD1: power-domain-cpu1 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
		};

		CPU_PD2: power-domain-cpu2 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
		};

		CPU_PD3: power-domain-cpu3 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
		};

		CPU_PD4: power-domain-cpu4 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
		};

		CPU_PD5: power-domain-cpu5 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
		};

		CPU_PD6: power-domain-cpu6 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
		};

		CPU_PD7: power-domain-cpu7 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
		};

		CLUSTER_PD: power-domain-cluster {
			#power-domain-cells = <0>;
			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_CX_RET &CLUSTER_SLEEP_LLCC_OFF>;
		};
	};

	qspi_opp_table: opp-table-qspi {
		compatible = "operating-points-v2";

		opp-75000000 {
			opp-hz = /bits/ 64 <75000000>;
			required-opps = <&rpmhpd_opp_low_svs>;
		};

		opp-150000000 {
			opp-hz = /bits/ 64 <150000000>;
			required-opps = <&rpmhpd_opp_svs>;
		};

		opp-200000000 {
			opp-hz = /bits/ 64 <200000000>;
			required-opps = <&rpmhpd_opp_svs_l1>;
		};

		opp-300000000 {
			opp-hz = /bits/ 64 <300000000>;
			required-opps = <&rpmhpd_opp_nom>;
		};
	};

	qup_opp_table: opp-table-qup {
		compatible = "operating-points-v2";

		opp-75000000 {
			opp-hz = /bits/ 64 <75000000>;
			required-opps = <&rpmhpd_opp_low_svs>;
		};

		opp-100000000 {
			opp-hz = /bits/ 64 <100000000>;
			required-opps = <&rpmhpd_opp_svs>;
		};

		opp-128000000 {
			opp-hz = /bits/ 64 <128000000>;
			required-opps = <&rpmhpd_opp_nom>;
		};
	};

	soc: soc@0 {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges = <0 0 0 0 0x10 0>;
		dma-ranges = <0 0 0 0 0x10 0>;
		compatible = "simple-bus";

		gcc: clock-controller@100000 {
			compatible = "qcom,gcc-sc7280";
			reg = <0 0x00100000 0 0x1f0000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
				 <0>, <&pcie1_phy>,
				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
				      "ufs_phy_tx_symbol_0_clk",
				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			power-domains = <&rpmhpd SC7280_CX>;
		};

		ipcc: mailbox@408000 {
			compatible = "qcom,sc7280-ipcc", "qcom,ipcc";
			reg = <0 0x00408000 0 0x1000>;
			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <3>;
			#mbox-cells = <2>;
		};

		qfprom: efuse@784000 {
			compatible = "qcom,sc7280-qfprom", "qcom,qfprom";
			reg = <0 0x00784000 0 0xa20>,
			      <0 0x00780000 0 0xa20>,
			      <0 0x00782000 0 0x120>,
			      <0 0x00786000 0 0x1fff>;
			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
			clock-names = "core";
			power-domains = <&rpmhpd SC7280_MX>;
			#address-cells = <1>;
			#size-cells = <1>;

			gpu_speed_bin: gpu-speed-bin@1e9 {
				reg = <0x1e9 0x2>;
				bits = <5 8>;
			};
		};

		sdhc_1: mmc@7c4000 {
			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
			pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
			status = "disabled";

			reg = <0 0x007c4000 0 0x1000>,
			      <0 0x007c5000 0 0x1000>;
			reg-names = "hc", "cqhci";

			iommus = <&apps_smmu 0xc0 0x0>;
			interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface", "core", "xo";
			interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>;
			interconnect-names = "sdhc-ddr","cpu-sdhc";
			power-domains = <&rpmhpd SC7280_CX>;
			operating-points-v2 = <&sdhc1_opp_table>;

			bus-width = <8>;
			supports-cqe;
			dma-coherent;

			qcom,dll-config = <0x0007642c>;
			qcom,ddr-config = <0x80040868>;

			mmc-ddr-1_8v;
			mmc-hs200-1_8v;
			mmc-hs400-1_8v;
			mmc-hs400-enhanced-strobe;

			resets = <&gcc GCC_SDCC1_BCR>;

			sdhc1_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
					opp-peak-kBps = <1800000 400000>;
					opp-avg-kBps = <100000 0>;
				};

				opp-384000000 {
					opp-hz = /bits/ 64 <384000000>;
					required-opps = <&rpmhpd_opp_nom>;
					opp-peak-kBps = <5400000 1600000>;
					opp-avg-kBps = <390000 0>;
				};
			};
		};

		gpi_dma0: dma-controller@900000 {
			#dma-cells = <3>;
			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0 0x00900000 0 0x60000>;
			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
			dma-channels = <12>;
			dma-channel-mask = <0x7f>;
			iommus = <&apps_smmu 0x0136 0x0>;
			status = "disabled";
		};

		qupv3_id_0: geniqup@9c0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0 0x009c0000 0 0x2000>;
			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
			clock-names = "m-ahb", "s-ahb";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			iommus = <&apps_smmu 0x123 0x0>;
			status = "disabled";

			i2c0: i2c@980000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00980000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c0_data_clk>;
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi0: spi@980000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00980000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart0: serial@980000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00980000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>;
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c1: i2c@984000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00984000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c1_data_clk>;
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi1: spi@984000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00984000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart1: serial@984000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00984000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>;
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c2: i2c@988000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00988000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c2_data_clk>;
				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi2: spi@988000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00988000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart2: serial@988000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00988000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>;
				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c3: i2c@98c000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x0098c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c3_data_clk>;
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi3: spi@98c000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x0098c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart3: serial@98c000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x0098c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>;
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c4: i2c@990000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00990000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c4_data_clk>;
				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi4: spi@990000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00990000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart4: serial@990000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00990000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>;
				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c5: i2c@994000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00994000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c5_data_clk>;
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi5: spi@994000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00994000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart5: serial@994000 {
				compatible = "qcom,geni-debug-uart";
				reg = <0 0x00994000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>;
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c6: i2c@998000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00998000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c6_data_clk>;
				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi6: spi@998000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00998000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart6: serial@998000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00998000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>;
				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c7: i2c@99c000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x0099c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c7_data_clk>;
				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi7: spi@99c000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x0099c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart7: serial@99c000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x0099c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>;
				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};
		};

		gpi_dma1: dma-controller@a00000 {
			#dma-cells = <3>;
			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0 0x00a00000 0 0x60000>;
			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
			dma-channels = <12>;
			dma-channel-mask = <0x1e>;
			iommus = <&apps_smmu 0x56 0x0>;
			status = "disabled";
		};

		qupv3_id_1: geniqup@ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0 0x00ac0000 0 0x2000>;
			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
			clock-names = "m-ahb", "s-ahb";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			iommus = <&apps_smmu 0x43 0x0>;
			status = "disabled";

			i2c8: i2c@a80000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a80000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c8_data_clk>;
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi8: spi@a80000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a80000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart8: serial@a80000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a80000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>;
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c9: i2c@a84000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a84000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c9_data_clk>;
				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi9: spi@a84000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a84000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart9: serial@a84000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a84000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>;
				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c10: i2c@a88000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a88000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c10_data_clk>;
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi10: spi@a88000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a88000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart10: serial@a88000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a88000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>;
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c11: i2c@a8c000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a8c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c11_data_clk>;
				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi11: spi@a8c000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a8c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart11: serial@a8c000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a8c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>;
				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c12: i2c@a90000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a90000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c12_data_clk>;
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi12: spi@a90000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a90000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart12: serial@a90000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a90000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>;
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c13: i2c@a94000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a94000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c13_data_clk>;
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi13: spi@a94000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a94000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart13: serial@a94000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a94000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>;
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c14: i2c@a98000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a98000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c14_data_clk>;
				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi14: spi@a98000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a98000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart14: serial@a98000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a98000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>;
				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c15: i2c@a9c000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a9c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c15_data_clk>;
				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				power-domains = <&rpmhpd SC7280_CX>;
				required-opps = <&rpmhpd_opp_low_svs>;
				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			spi15: spi@a9c000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a9c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			uart15: serial@a9c000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a9c000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
				clock-names = "se";
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>;
				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7280_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};
		};

		rng: rng@10d3000 {
			compatible = "qcom,sc7280-trng", "qcom,trng";
			reg = <0 0x010d3000 0 0x1000>;
		};

		cnoc2: interconnect@1500000 {
			reg = <0 0x01500000 0 0x1000>;
			compatible = "qcom,sc7280-cnoc2";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		cnoc3: interconnect@1502000 {
			reg = <0 0x01502000 0 0x1000>;
			compatible = "qcom,sc7280-cnoc3";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		mc_virt: interconnect@1580000 {
			reg = <0 0x01580000 0 0x4>;
			compatible = "qcom,sc7280-mc-virt";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		system_noc: interconnect@1680000 {
			reg = <0 0x01680000 0 0x15480>;
			compatible = "qcom,sc7280-system-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		aggre1_noc: interconnect@16e0000 {
			compatible = "qcom,sc7280-aggre1-noc";
			reg = <0 0x016e0000 0 0x1c080>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
		};

		aggre2_noc: interconnect@1700000 {
			reg = <0 0x01700000 0 0x2b080>;
			compatible = "qcom,sc7280-aggre2-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			clocks = <&rpmhcc RPMH_IPA_CLK>;
		};

		mmss_noc: interconnect@1740000 {
			reg = <0 0x01740000 0 0x1e080>;
			compatible = "qcom,sc7280-mmss-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		wifi: wifi@17a10040 {
			compatible = "qcom,wcn6750-wifi";
			reg = <0 0x17a10040 0 0x0>;
			iommus = <&apps_smmu 0x1c00 0x1>;
			interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
			qcom,rproc = <&remoteproc_wpss>;
			memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
			status = "disabled";
			qcom,smem-states = <&wlan_smp2p_out 0>;
			qcom,smem-state-names = "wlan-smp2p-out";
		};

		pcie1: pcie@1c08000 {
			compatible = "qcom,pcie-sc7280";
			reg = <0 0x01c08000 0 0x3000>,
			      <0 0x40000000 0 0xf1d>,
			      <0 0x40000f20 0 0xa8>,
			      <0 0x40001000 0 0x1000>,
			      <0 0x40100000 0 0x100000>;

			reg-names = "parf", "dbi", "elbi", "atu", "config";
			device_type = "pci";
			linux,pci-domain = <1>;
			bus-range = <0x00 0xff>;
			num-lanes = <2>;

			#address-cells = <3>;
			#size-cells = <2>;

			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;

			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi0", "msi1", "msi2", "msi3",
					  "msi4", "msi5", "msi6", "msi7";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
				 <&pcie1_phy>,
				 <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_PCIE_1_AUX_CLK>,
				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
				 <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;

			clock-names = "pipe",
				      "pipe_mux",
				      "phy_pipe",
				      "ref",
				      "aux",
				      "cfg",
				      "bus_master",
				      "bus_slave",
				      "slave_q2a",
				      "tbu",
				      "ddrss_sf_tbu",
				      "aggre0",
				      "aggre1";

			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
			assigned-clock-rates = <19200000>;

			resets = <&gcc GCC_PCIE_1_BCR>;
			reset-names = "pci";

			power-domains = <&gcc GCC_PCIE_1_GDSC>;

			phys = <&pcie1_phy>;
			phy-names = "pciephy";

			pinctrl-names = "default";
			pinctrl-0 = <&pcie1_clkreq_n>;

			dma-coherent;

			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
				    <0x100 &apps_smmu 0x1c81 0x1>;

			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};

		pcie1_phy: phy@1c0e000 {
			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
			reg = <0 0x01c0e000 0 0x1000>;
			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
				 <&gcc GCC_PCIE_CLKREF_EN>,
				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
				 <&gcc GCC_PCIE_1_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "ref",
				      "refgen",
				      "pipe";

			clock-output-names = "pcie_1_pipe_clk";
			#clock-cells = <0>;

			#phy-cells = <0>;

			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
			reset-names = "phy";

			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
			assigned-clock-rates = <100000000>;

			status = "disabled";
		};

		ufs_mem_hc: ufs@1d84000 {
			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
				     "jedec,ufs-2.0";
			reg = <0x0 0x01d84000 0x0 0x3000>;
			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
			phys = <&ufs_mem_phy>;
			phy-names = "ufsphy";
			lanes-per-direction = <2>;
			#reset-cells = <1>;
			resets = <&gcc GCC_UFS_PHY_BCR>;
			reset-names = "rst";

			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
			required-opps = <&rpmhpd_opp_nom>;

			iommus = <&apps_smmu 0x80 0x0>;
			dma-coherent;

			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
			interconnect-names = "ufs-ddr", "cpu-ufs";

			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
				 <&gcc GCC_UFS_PHY_AHB_CLK>,
				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
			clock-names = "core_clk",
				      "bus_aggr_clk",
				      "iface_clk",
				      "core_clk_unipro",
				      "ref_clk",
				      "tx_lane0_sync_clk",
				      "rx_lane0_sync_clk",
				      "rx_lane1_sync_clk";
			freq-table-hz =
				<75000000 300000000>,
				<0 0>,
				<0 0>,
				<75000000 300000000>,
				<0 0>,
				<0 0>,
				<0 0>,
				<0 0>;
			qcom,ice = <&ice>;

			status = "disabled";
		};

		ufs_mem_phy: phy@1d87000 {
			compatible = "qcom,sc7280-qmp-ufs-phy";
			reg = <0x0 0x01d87000 0x0 0xe00>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
				 <&gcc GCC_UFS_1_CLKREF_EN>;
			clock-names = "ref", "ref_aux", "qref";

			power-domains = <&rpmhpd SC7280_MX>;

			resets = <&ufs_mem_hc 0>;
			reset-names = "ufsphy";

			#clock-cells = <1>;
			#phy-cells = <0>;

			status = "disabled";
		};

		ice: crypto@1d88000 {
			compatible = "qcom,sc7280-inline-crypto-engine",
				     "qcom,inline-crypto-engine";
			reg = <0 0x01d88000 0 0x8000>;
			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
		};

		cryptobam: dma-controller@1dc4000 {
			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
			reg = <0x0 0x01dc4000 0x0 0x28000>;
			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			iommus = <&apps_smmu 0x4e4 0x0011>,
				 <&apps_smmu 0x4e6 0x0011>;
			qcom,ee = <0>;
			qcom,controlled-remotely;
			num-channels = <16>;
			qcom,num-ees = <4>;
		};

		crypto: crypto@1dfa000 {
			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
			reg = <0x0 0x01dfa000 0x0 0x6000>;
			dmas = <&cryptobam 4>, <&cryptobam 5>;
			dma-names = "rx", "tx";
			iommus = <&apps_smmu 0x4e4 0x0011>,
				 <&apps_smmu 0x4e4 0x0011>;
			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
			interconnect-names = "memory";
		};

		ipa: ipa@1e40000 {
			compatible = "qcom,sc7280-ipa";

			iommus = <&apps_smmu 0x480 0x0>,
				 <&apps_smmu 0x482 0x0>;
			reg = <0 0x01e40000 0 0x8000>,
			      <0 0x01e50000 0 0x4ad0>,
			      <0 0x01e04000 0 0x23000>;
			reg-names = "ipa-reg",
				    "ipa-shared",
				    "gsi";

			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "ipa",
					  "gsi",
					  "ipa-clock-query",
					  "ipa-setup-ready";

			clocks = <&rpmhcc RPMH_IPA_CLK>;
			clock-names = "core";

			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>;
			interconnect-names = "memory",
					     "config";

			qcom,qmp = <&aoss_qmp>;

			qcom,smem-states = <&ipa_smp2p_out 0>,
					   <&ipa_smp2p_out 1>;
			qcom,smem-state-names = "ipa-clock-enabled-valid",
						"ipa-clock-enabled";

			status = "disabled";
		};

		tcsr_mutex: hwlock@1f40000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0 0x01f40000 0 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr_1: syscon@1f60000 {
			compatible = "qcom,sc7280-tcsr", "syscon";
			reg = <0 0x01f60000 0 0x20000>;
		};

		tcsr_2: syscon@1fc0000 {
			compatible = "qcom,sc7280-tcsr", "syscon";
			reg = <0 0x01fc0000 0 0x30000>;
		};

		lpasscc: lpasscc@3000000 {
			compatible = "qcom,sc7280-lpasscc";
			reg = <0 0x03000000 0 0x40>,
			      <0 0x03c04000 0 0x4>;
			reg-names = "qdsp6ss", "top_cc";
			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
			clock-names = "iface";
			#clock-cells = <1>;
			status = "reserved"; /* Owned by ADSP firmware */
		};

		lpass_rx_macro: codec@3200000 {
			compatible = "qcom,sc7280-lpass-rx-macro";
			reg = <0 0x03200000 0 0x1000>;

			pinctrl-names = "default";
			pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;

			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
				 <&lpass_va_macro>;
			clock-names = "mclk", "npl", "fsgen";

			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
			power-domain-names = "macro", "dcodec";

			#clock-cells = <0>;
			#sound-dai-cells = <1>;

			status = "disabled";
		};

		swr0: soundwire@3210000 {
			compatible = "qcom,soundwire-v1.6.0";
			reg = <0 0x03210000 0 0x2000>;

			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&lpass_rx_macro>;
			clock-names = "iface";

			qcom,din-ports = <0>;
			qcom,dout-ports = <5>;

			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
			reset-names = "swr_audio_cgcr";

			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;

			#sound-dai-cells = <1>;
			#address-cells = <2>;
			#size-cells = <0>;

			status = "disabled";
		};

		lpass_tx_macro: codec@3220000 {
			compatible = "qcom,sc7280-lpass-tx-macro";
			reg = <0 0x03220000 0 0x1000>;

			pinctrl-names = "default";
			pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>;

			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
				 <&lpass_va_macro>;
			clock-names = "mclk", "npl", "fsgen";

			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
			power-domain-names = "macro", "dcodec";

			#clock-cells = <0>;
			#sound-dai-cells = <1>;

			status = "disabled";
		};

		swr1: soundwire@3230000 {
			compatible = "qcom,soundwire-v1.6.0";
			reg = <0 0x03230000 0 0x2000>;

			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&lpass_tx_macro>;
			clock-names = "iface";

			qcom,din-ports = <3>;
			qcom,dout-ports = <0>;

			resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
			reset-names = "swr_audio_cgcr";

			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03>;
			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02>;
			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff>;
			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;

			#sound-dai-cells = <1>;
			#address-cells = <2>;
			#size-cells = <0>;

			status = "disabled";
		};

		lpass_audiocc: clock-controller@3300000 {
			compatible = "qcom,sc7280-lpassaudiocc";
			reg = <0 0x03300000 0 0x30000>,
			      <0 0x032a9000 0 0x1000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
			       <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
			clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
			power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
			#clock-cells = <1>;
			#power-domain-cells = <1>;
			#reset-cells = <1>;
		};

		lpass_va_macro: codec@3370000 {
			compatible = "qcom,sc7280-lpass-va-macro";
			reg = <0 0x03370000 0 0x1000>;

			pinctrl-names = "default";
			pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;

			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
			clock-names = "mclk";

			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
			power-domain-names = "macro", "dcodec";

			#clock-cells = <0>;
			#sound-dai-cells = <1>;

			status = "disabled";
		};

		lpass_aon: clock-controller@3380000 {
			compatible = "qcom,sc7280-lpassaoncc";
			reg = <0 0x03380000 0 0x30000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
			       <&rpmhcc RPMH_CXO_CLK_A>,
			       <&lpass_core LPASS_CORE_CC_CORE_CLK>;
			clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
			#clock-cells = <1>;
			#power-domain-cells = <1>;
			status = "reserved"; /* Owned by ADSP firmware */
		};

		lpass_core: clock-controller@3900000 {
			compatible = "qcom,sc7280-lpasscorecc";
			reg = <0 0x03900000 0 0x50000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "bi_tcxo";
			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
			#clock-cells = <1>;
			#power-domain-cells = <1>;
			status = "reserved"; /* Owned by ADSP firmware */
		};

		lpass_cpu: audio@3987000 {
			compatible = "qcom,sc7280-lpass-cpu";

			reg = <0 0x03987000 0 0x68000>,
			      <0 0x03b00000 0 0x29000>,
			      <0 0x03260000 0 0xc000>,
			      <0 0x03280000 0 0x29000>,
			      <0 0x03340000 0 0x29000>,
			      <0 0x0336c000 0 0x3000>;
			reg-names = "lpass-hdmiif",
				    "lpass-lpaif",
				    "lpass-rxtx-cdc-dma-lpm",
				    "lpass-rxtx-lpaif",
				    "lpass-va-lpaif",
				    "lpass-va-cdc-dma-lpm";

			iommus = <&apps_smmu 0x1820 0>,
				 <&apps_smmu 0x1821 0>,
				 <&apps_smmu 0x1832 0>;

			power-domains = <&rpmhpd SC7280_LCX>;
			power-domain-names = "lcx";
			required-opps = <&rpmhpd_opp_nom>;

			clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
				 <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>,
				 <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
				 <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
				 <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
				 <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
			clock-names = "aon_cc_audio_hm_h",
				      "audio_cc_ext_mclk0",
				      "core_cc_sysnoc_mport_core",
				      "core_cc_ext_if0_ibit",
				      "core_cc_ext_if1_ibit",
				      "audio_cc_codec_mem",
				      "audio_cc_codec_mem0",
				      "audio_cc_codec_mem1",
				      "audio_cc_codec_mem2",
				      "aon_cc_va_mem0";

			#sound-dai-cells = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "lpass-irq-lpaif",
					  "lpass-irq-hdmi",
					  "lpass-irq-vaif",
					  "lpass-irq-rxtxif";

			status = "disabled";
		};

		slimbam: dma-controller@3a84000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0 0x03a84000 0 0x20000>;
			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			qcom,controlled-remotely;
			num-channels  = <31>;
			qcom,ee = <1>;
			qcom,num-ees = <2>;
			iommus = <&apps_smmu 0x1826 0x0>;
			status = "disabled";
		};

		slim: slim-ngd@3ac0000 {
			compatible = "qcom,slim-ngd-v1.5.0";
			reg = <0 0x03ac0000 0 0x2c000>;
			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
			dmas = <&slimbam 3>, <&slimbam 4>;
			dma-names = "rx", "tx";
			iommus = <&apps_smmu 0x1826 0x0>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		lpass_hm: clock-controller@3c00000 {
			compatible = "qcom,sc7280-lpasshm";
			reg = <0 0x03c00000 0 0x28>;
			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "bi_tcxo";
			#clock-cells = <1>;
			#power-domain-cells = <1>;
			status = "reserved"; /* Owned by ADSP firmware */
		};

		lpass_ag_noc: interconnect@3c40000 {
			reg = <0 0x03c40000 0 0xf080>;
			compatible = "qcom,sc7280-lpass-ag-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		lpass_tlmm: pinctrl@33c0000 {
			compatible = "qcom,sc7280-lpass-lpi-pinctrl";
			reg = <0 0x033c0000 0x0 0x20000>,
				<0 0x03550000 0x0 0x10000>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&lpass_tlmm 0 0 15>;

			lpass_dmic01_clk: dmic01-clk-state {
				pins = "gpio6";
				function = "dmic1_clk";
			};

			lpass_dmic01_data: dmic01-data-state {
				pins = "gpio7";
				function = "dmic1_data";
			};

			lpass_dmic23_clk: dmic23-clk-state {
				pins = "gpio8";
				function = "dmic2_clk";
			};

			lpass_dmic23_data: dmic23-data-state {
				pins = "gpio9";
				function = "dmic2_data";
			};

			lpass_rx_swr_clk: rx-swr-clk-state {
				pins = "gpio3";
				function = "swr_rx_clk";
			};

			lpass_rx_swr_data: rx-swr-data-state {
				pins = "gpio4", "gpio5";
				function = "swr_rx_data";
			};

			lpass_tx_swr_clk: tx-swr-clk-state {
				pins = "gpio0";
				function = "swr_tx_clk";
			};

			lpass_tx_swr_data: tx-swr-data-state {
				pins = "gpio1", "gpio2", "gpio14";
				function = "swr_tx_data";
			};
		};

		gpu: gpu@3d00000 {
			compatible = "qcom,adreno-635.0", "qcom,adreno";
			reg = <0 0x03d00000 0 0x40000>,
			      <0 0x03d9e000 0 0x1000>,
			      <0 0x03d61000 0 0x800>;
			reg-names = "kgsl_3d0_reg_memory",
				    "cx_mem",
				    "cx_dbgc";
			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
			iommus = <&adreno_smmu 0 0x400>,
				 <&adreno_smmu 1 0x400>;
			operating-points-v2 = <&gpu_opp_table>;
			qcom,gmu = <&gmu>;
			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
			interconnect-names = "gfx-mem";
			#cooling-cells = <2>;

			nvmem-cells = <&gpu_speed_bin>;
			nvmem-cell-names = "speed_bin";

			gpu_zap_shader: zap-shader {
				memory-region = <&gpu_zap_mem>;
			};

			gpu_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-315000000 {
					opp-hz = /bits/ 64 <315000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
					opp-peak-kBps = <1804000>;
					opp-supported-hw = <0x07>;
				};

				opp-450000000 {
					opp-hz = /bits/ 64 <450000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
					opp-peak-kBps = <4068000>;
					opp-supported-hw = <0x07>;
				};

				/* Only applicable for SKUs which has 550Mhz as Fmax */
				opp-550000000-0 {
					opp-hz = /bits/ 64 <550000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
					opp-peak-kBps = <8368000>;
					opp-supported-hw = <0x01>;
				};

				opp-550000000-1 {
					opp-hz = /bits/ 64 <550000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
					opp-peak-kBps = <6832000>;
					opp-supported-hw = <0x06>;
				};

				opp-608000000 {
					opp-hz = /bits/ 64 <608000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
					opp-peak-kBps = <8368000>;
					opp-supported-hw = <0x06>;
				};

				opp-700000000 {
					opp-hz = /bits/ 64 <700000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
					opp-peak-kBps = <8532000>;
					opp-supported-hw = <0x06>;
				};

				opp-812000000 {
					opp-hz = /bits/ 64 <812000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
					opp-peak-kBps = <8532000>;
					opp-supported-hw = <0x06>;
				};

				opp-840000000 {
					opp-hz = /bits/ 64 <840000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
					opp-peak-kBps = <8532000>;
					opp-supported-hw = <0x02>;
				};

				opp-900000000 {
					opp-hz = /bits/ 64 <900000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
					opp-peak-kBps = <8532000>;
					opp-supported-hw = <0x02>;
				};
			};
		};

		gmu: gmu@3d6a000 {
			compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
			reg = <0 0x03d6a000 0 0x34000>,
				<0 0x3de0000 0 0x10000>,
				<0 0x0b290000 0 0x10000>;
			reg-names = "gmu", "rscc", "gmu_pdc";
			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hfi", "gmu";
			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
				 <&gpucc GPU_CC_CXO_CLK>,
				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
				 <&gpucc GPU_CC_AHB_CLK>,
				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
			clock-names = "gmu",
				      "cxo",
				      "axi",
				      "memnoc",
				      "ahb",
				      "hub",
				      "smmu_vote";
			power-domains = <&gpucc GPU_CC_CX_GDSC>,
					<&gpucc GPU_CC_GX_GDSC>;
			power-domain-names = "cx",
					     "gx";
			iommus = <&adreno_smmu 5 0x400>;
			operating-points-v2 = <&gmu_opp_table>;

			gmu_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-200000000 {
					opp-hz = /bits/ 64 <200000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
				};
			};
		};

		gpucc: clock-controller@3d90000 {
			compatible = "qcom,sc7280-gpucc";
			reg = <0 0x03d90000 0 0x9000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
			clock-names = "bi_tcxo",
				      "gcc_gpu_gpll0_clk_src",
				      "gcc_gpu_gpll0_div_clk_src";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		dma@117f000 {
			compatible = "qcom,sc7280-dcc", "qcom,dcc";
			reg = <0x0 0x0117f000 0x0 0x1000>,
			      <0x0 0x01112000 0x0 0x6000>;
		};

		adreno_smmu: iommu@3da0000 {
			compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu",
				     "qcom,smmu-500", "arm,mmu-500";
			reg = <0 0x03da0000 0 0x20000>;
			#iommu-cells = <2>;
			#global-interrupts = <2>;
			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
				 <&gpucc GPU_CC_AHB_CLK>,
				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
				 <&gpucc GPU_CC_CX_GMU_CLK>,
				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
				 <&gpucc GPU_CC_HUB_AON_CLK>;
			clock-names = "gcc_gpu_memnoc_gfx_clk",
					"gcc_gpu_snoc_dvm_gfx_clk",
					"gpu_cc_ahb_clk",
					"gpu_cc_hlos1_vote_gpu_smmu_clk",
					"gpu_cc_cx_gmu_clk",
					"gpu_cc_hub_cx_int_clk",
					"gpu_cc_hub_aon_clk";

			power-domains = <&gpucc GPU_CC_CX_GDSC>;
			dma-coherent;
		};

		gfx_0_tbu: tbu@3dd9000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x3dd9000 0x0 0x1000>;
			qcom,stream-id-range = <&adreno_smmu 0x0 0x400>;
		};

		gfx_1_tbu: tbu@3ddd000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x3ddd000 0x0 0x1000>;
			qcom,stream-id-range = <&adreno_smmu 0x400 0x400>;
		};

		remoteproc_mpss: remoteproc@4080000 {
			compatible = "qcom,sc7280-mpss-pas";
			reg = <0 0x04080000 0 0x10000>;

			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready", "handover",
					  "stop-ack", "shutdown-ack";

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "xo";

			power-domains = <&rpmhpd SC7280_CX>,
					<&rpmhpd SC7280_MSS>;
			power-domain-names = "cx", "mss";

			memory-region = <&mpss_mem>;

			qcom,qmp = <&aoss_qmp>;

			qcom,smem-states = <&modem_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_MPSS
						IPCC_MPROC_SIGNAL_GLINK_QMP>;
				label = "modem";
				qcom,remote-pid = <1>;
			};
		};

		stm@6002000 {
			compatible = "arm,coresight-stm", "arm,primecell";
			reg = <0 0x06002000 0 0x1000>,
			      <0 0x16280000 0 0x180000>;
			reg-names = "stm-base", "stm-stimulus-base";

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					stm_out: endpoint {
						remote-endpoint = <&funnel0_in7>;
					};
				};
			};
		};

		funnel@6041000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06041000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					funnel0_out: endpoint {
						remote-endpoint = <&merge_funnel_in0>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@7 {
					reg = <7>;
					funnel0_in7: endpoint {
						remote-endpoint = <&stm_out>;
					};
				};
			};
		};

		funnel@6042000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06042000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					funnel1_out: endpoint {
						remote-endpoint = <&merge_funnel_in1>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@4 {
					reg = <4>;
					funnel1_in4: endpoint {
						remote-endpoint = <&apss_merge_funnel_out>;
					};
				};
			};
		};

		funnel@6045000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06045000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					merge_funnel_out: endpoint {
						remote-endpoint = <&swao_funnel_in>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					merge_funnel_in0: endpoint {
						remote-endpoint = <&funnel0_out>;
					};
				};

				port@1 {
					reg = <1>;
					merge_funnel_in1: endpoint {
						remote-endpoint = <&funnel1_out>;
					};
				};
			};
		};

		replicator@6046000 {
			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
			reg = <0 0x06046000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					replicator_out: endpoint {
						remote-endpoint = <&etr_in>;
					};
				};
			};

			in-ports {
				port {
					replicator_in: endpoint {
						remote-endpoint = <&swao_replicator_out>;
					};
				};
			};
		};

		etr@6048000 {
			compatible = "arm,coresight-tmc", "arm,primecell";
			reg = <0 0x06048000 0 0x1000>;
			iommus = <&apps_smmu 0x04c0 0>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,scatter-gather;

			in-ports {
				port {
					etr_in: endpoint {
						remote-endpoint = <&replicator_out>;
					};
				};
			};
		};

		funnel@6b04000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06b04000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					swao_funnel_out: endpoint {
						remote-endpoint = <&etf_in>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@7 {
					reg = <7>;
					swao_funnel_in: endpoint {
						remote-endpoint = <&merge_funnel_out>;
					};
				};
			};
		};

		etf@6b05000 {
			compatible = "arm,coresight-tmc", "arm,primecell";
			reg = <0 0x06b05000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					etf_out: endpoint {
						remote-endpoint = <&swao_replicator_in>;
					};
				};
			};

			in-ports {
				port {
					etf_in: endpoint {
						remote-endpoint = <&swao_funnel_out>;
					};
				};
			};
		};

		replicator@6b06000 {
			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
			reg = <0 0x06b06000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			qcom,replicator-loses-context;

			out-ports {
				port {
					swao_replicator_out: endpoint {
						remote-endpoint = <&replicator_in>;
					};
				};
			};

			in-ports {
				port {
					swao_replicator_in: endpoint {
						remote-endpoint = <&etf_out>;
					};
				};
			};
		};

		etm@7040000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07040000 0 0x1000>;

			cpu = <&CPU0>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm0_out: endpoint {
						remote-endpoint = <&apss_funnel_in0>;
					};
				};
			};
		};

		etm@7140000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07140000 0 0x1000>;

			cpu = <&CPU1>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm1_out: endpoint {
						remote-endpoint = <&apss_funnel_in1>;
					};
				};
			};
		};

		etm@7240000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07240000 0 0x1000>;

			cpu = <&CPU2>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm2_out: endpoint {
						remote-endpoint = <&apss_funnel_in2>;
					};
				};
			};
		};

		etm@7340000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07340000 0 0x1000>;

			cpu = <&CPU3>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm3_out: endpoint {
						remote-endpoint = <&apss_funnel_in3>;
					};
				};
			};
		};

		etm@7440000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07440000 0 0x1000>;

			cpu = <&CPU4>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm4_out: endpoint {
						remote-endpoint = <&apss_funnel_in4>;
					};
				};
			};
		};

		etm@7540000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07540000 0 0x1000>;

			cpu = <&CPU5>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm5_out: endpoint {
						remote-endpoint = <&apss_funnel_in5>;
					};
				};
			};
		};

		etm@7640000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07640000 0 0x1000>;

			cpu = <&CPU6>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm6_out: endpoint {
						remote-endpoint = <&apss_funnel_in6>;
					};
				};
			};
		};

		etm@7740000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07740000 0 0x1000>;

			cpu = <&CPU7>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm7_out: endpoint {
						remote-endpoint = <&apss_funnel_in7>;
					};
				};
			};
		};

		funnel@7800000 { /* APSS Funnel */
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x07800000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					apss_funnel_out: endpoint {
						remote-endpoint = <&apss_merge_funnel_in>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					apss_funnel_in0: endpoint {
						remote-endpoint = <&etm0_out>;
					};
				};

				port@1 {
					reg = <1>;
					apss_funnel_in1: endpoint {
						remote-endpoint = <&etm1_out>;
					};
				};

				port@2 {
					reg = <2>;
					apss_funnel_in2: endpoint {
						remote-endpoint = <&etm2_out>;
					};
				};

				port@3 {
					reg = <3>;
					apss_funnel_in3: endpoint {
						remote-endpoint = <&etm3_out>;
					};
				};

				port@4 {
					reg = <4>;
					apss_funnel_in4: endpoint {
						remote-endpoint = <&etm4_out>;
					};
				};

				port@5 {
					reg = <5>;
					apss_funnel_in5: endpoint {
						remote-endpoint = <&etm5_out>;
					};
				};

				port@6 {
					reg = <6>;
					apss_funnel_in6: endpoint {
						remote-endpoint = <&etm6_out>;
					};
				};

				port@7 {
					reg = <7>;
					apss_funnel_in7: endpoint {
						remote-endpoint = <&etm7_out>;
					};
				};
			};
		};

		funnel@7810000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x07810000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					apss_merge_funnel_out: endpoint {
						remote-endpoint = <&funnel1_in4>;
					};
				};
			};

			in-ports {
				port {
					apss_merge_funnel_in: endpoint {
						remote-endpoint = <&apss_funnel_out>;
					};
				};
			};
		};

		sdhc_2: mmc@8804000 {
			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
			pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
			status = "disabled";

			reg = <0 0x08804000 0 0x1000>;

			iommus = <&apps_smmu 0x100 0x0>;
			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
				 <&gcc GCC_SDCC2_APPS_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface", "core", "xo";
			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>;
			interconnect-names = "sdhc-ddr","cpu-sdhc";
			power-domains = <&rpmhpd SC7280_CX>;
			operating-points-v2 = <&sdhc2_opp_table>;

			bus-width = <4>;
			dma-coherent;

			qcom,dll-config = <0x0007642c>;

			resets = <&gcc GCC_SDCC2_BCR>;

			sdhc2_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
					opp-peak-kBps = <1800000 400000>;
					opp-avg-kBps = <100000 0>;
				};

				opp-202000000 {
					opp-hz = /bits/ 64 <202000000>;
					required-opps = <&rpmhpd_opp_nom>;
					opp-peak-kBps = <5400000 1600000>;
					opp-avg-kBps = <200000 0>;
				};
			};
		};

		usb_1_hsphy: phy@88e3000 {
			compatible = "qcom,sc7280-usb-hs-phy",
				     "qcom,usb-snps-hs-7nm-phy";
			reg = <0 0x088e3000 0 0x400>;
			status = "disabled";
			#phy-cells = <0>;

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "ref";

			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
		};

		usb_2_hsphy: phy@88e4000 {
			compatible = "qcom,sc7280-usb-hs-phy",
				     "qcom,usb-snps-hs-7nm-phy";
			reg = <0 0x088e4000 0 0x400>;
			status = "disabled";
			#phy-cells = <0>;

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "ref";

			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
		};

		usb_1_qmpphy: phy@88e8000 {
			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
			reg = <0 0x088e8000 0 0x3000>;
			status = "disabled";

			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
			clock-names = "aux",
				      "ref",
				      "com_aux",
				      "usb3_pipe";

			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
			reset-names = "phy", "common";

			#clock-cells = <1>;
			#phy-cells = <1>;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					usb_dp_qmpphy_out: endpoint {
					};
				};

				port@1 {
					reg = <1>;

					usb_dp_qmpphy_usb_ss_in: endpoint {
					};
				};

				port@2 {
					reg = <2>;

					usb_dp_qmpphy_dp_in: endpoint {
					};
				};
			};
		};

		usb_2: usb@8cf8800 {
			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
			reg = <0 0x08cf8800 0 0x400>;
			status = "disabled";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			dma-ranges;

			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
			clock-names = "cfg_noc",
				      "core",
				      "iface",
				      "sleep",
				      "mock_utmi";

			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
			assigned-clock-rates = <19200000>, <200000000>;

			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
			interrupt-names = "pwr_event",
					  "hs_phy_irq",
					  "dp_hs_phy_irq",
					  "dm_hs_phy_irq";

			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
			required-opps = <&rpmhpd_opp_nom>;

			resets = <&gcc GCC_USB30_SEC_BCR>;

			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
			interconnect-names = "usb-ddr", "apps-usb";

			usb_2_dwc3: usb@8c00000 {
				compatible = "snps,dwc3";
				reg = <0 0x08c00000 0 0xe000>;
				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
				iommus = <&apps_smmu 0xa0 0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_enblslpm_quirk;
				phys = <&usb_2_hsphy>;
				phy-names = "usb2-phy";
				maximum-speed = "high-speed";
				usb-role-switch;

				port {
					usb2_role_switch: endpoint {
						remote-endpoint = <&eud_ep>;
					};
				};
			};
		};

		qspi: spi@88dc000 {
			compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
			reg = <0 0x088dc000 0 0x1000>;
			iommus = <&apps_smmu 0x20 0x0>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
				 <&gcc GCC_QSPI_CORE_CLK>;
			clock-names = "iface", "core";
			interconnects = <&gem_noc MASTER_APPSS_PROC 0
					&cnoc2 SLAVE_QSPI_0 0>;
			interconnect-names = "qspi-config";
			power-domains = <&rpmhpd SC7280_CX>;
			operating-points-v2 = <&qspi_opp_table>;
			status = "disabled";
		};

		remoteproc_adsp: remoteproc@3700000 {
			compatible = "qcom,sc7280-adsp-pas";
			reg = <0 0x03700000 0 0x100>;

			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready", "handover",
					  "stop-ack", "shutdown-ack";

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "xo";

			power-domains = <&rpmhpd SC7280_LCX>,
					<&rpmhpd SC7280_LMX>;
			power-domain-names = "lcx", "lmx";

			memory-region = <&adsp_mem>;

			qcom,qmp = <&aoss_qmp>;

			qcom,smem-states = <&adsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;

				mboxes = <&ipcc IPCC_CLIENT_LPASS
						IPCC_MPROC_SIGNAL_GLINK_QMP>;

				label = "lpass";
				qcom,remote-pid = <2>;

				apr {
					compatible = "qcom,apr-v2";
					qcom,glink-channels = "apr_audio_svc";
					qcom,domain = <APR_DOMAIN_ADSP>;
					#address-cells = <1>;
					#size-cells = <0>;

					service@3 {
						reg = <APR_SVC_ADSP_CORE>;
						compatible = "qcom,q6core";
						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
					};

					q6afe: service@4 {
						compatible = "qcom,q6afe";
						reg = <APR_SVC_AFE>;
						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";

						q6afedai: dais {
							compatible = "qcom,q6afe-dais";
							#address-cells = <1>;
							#size-cells = <0>;
							#sound-dai-cells = <1>;
						};

						q6afecc: clock-controller {
							compatible = "qcom,q6afe-clocks";
							#clock-cells = <2>;
						};
					};

					q6asm: service@7 {
						compatible = "qcom,q6asm";
						reg = <APR_SVC_ASM>;
						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";

						q6asmdai: dais {
							compatible = "qcom,q6asm-dais";
							#address-cells = <1>;
							#size-cells = <0>;
							#sound-dai-cells = <1>;
							iommus = <&apps_smmu 0x1801 0x0>;

							dai@0 {
								reg = <0>;
							};

							dai@1 {
								reg = <1>;
							};

							dai@2 {
								reg = <2>;
							};
						};
					};

					q6adm: service@8 {
						compatible = "qcom,q6adm";
						reg = <APR_SVC_ADM>;
						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";

						q6routing: routing {
							compatible = "qcom,q6adm-routing";
							#sound-dai-cells = <0>;
						};
					};
				};

				fastrpc {
					compatible = "qcom,fastrpc";
					qcom,glink-channels = "fastrpcglink-apps-dsp";
					label = "adsp";
					qcom,non-secure-domain;
					#address-cells = <1>;
					#size-cells = <0>;

					compute-cb@3 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <3>;
						iommus = <&apps_smmu 0x1803 0x0>;
					};

					compute-cb@4 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <4>;
						iommus = <&apps_smmu 0x1804 0x0>;
					};

					compute-cb@5 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <5>;
						iommus = <&apps_smmu 0x1805 0x0>;
					};
				};
			};
		};

		remoteproc_wpss: remoteproc@8a00000 {
			compatible = "qcom,sc7280-wpss-pas";
			reg = <0 0x08a00000 0 0x10000>;

			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
					      <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready", "handover",
					  "stop-ack", "shutdown-ack";

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "xo";

			power-domains = <&rpmhpd SC7280_CX>,
					<&rpmhpd SC7280_MX>;
			power-domain-names = "cx", "mx";

			memory-region = <&wpss_mem>;

			qcom,qmp = <&aoss_qmp>;

			qcom,smem-states = <&wpss_smp2p_out 0>;
			qcom,smem-state-names = "stop";


			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_WPSS
						IPCC_MPROC_SIGNAL_GLINK_QMP>;

				label = "wpss";
				qcom,remote-pid = <13>;
			};
		};

		pmu@9091000 {
			compatible = "qcom,sc7280-llcc-bwmon";
			reg = <0 0x09091000 0 0x1000>;

			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;

			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;

			operating-points-v2 = <&llcc_bwmon_opp_table>;

			llcc_bwmon_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-0 {
					opp-peak-kBps = <800000>;
				};
				opp-1 {
					opp-peak-kBps = <1804000>;
				};
				opp-2 {
					opp-peak-kBps = <2188000>;
				};
				opp-3 {
					opp-peak-kBps = <3072000>;
				};
				opp-4 {
					opp-peak-kBps = <4068000>;
				};
				opp-5 {
					opp-peak-kBps = <6220000>;
				};
				opp-6 {
					opp-peak-kBps = <6832000>;
				};
				opp-7 {
					opp-peak-kBps = <8532000>;
				};
			};
		};

		pmu@90b6400 {
			compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon";
			reg = <0 0x090b6400 0 0x600>;

			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;

			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
			operating-points-v2 = <&cpu_bwmon_opp_table>;

			cpu_bwmon_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-0 {
					opp-peak-kBps = <2400000>;
				};
				opp-1 {
					opp-peak-kBps = <4800000>;
				};
				opp-2 {
					opp-peak-kBps = <7456000>;
				};
				opp-3 {
					opp-peak-kBps = <9600000>;
				};
				opp-4 {
					opp-peak-kBps = <12896000>;
				};
				opp-5 {
					opp-peak-kBps = <14928000>;
				};
				opp-6 {
					opp-peak-kBps = <17056000>;
				};
			};
		};

		dc_noc: interconnect@90e0000 {
			reg = <0 0x090e0000 0 0x5080>;
			compatible = "qcom,sc7280-dc-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		gem_noc: interconnect@9100000 {
			reg = <0 0x09100000 0 0xe2200>;
			compatible = "qcom,sc7280-gem-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		system-cache-controller@9200000 {
			compatible = "qcom,sc7280-llcc";
			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
			      <0 0x09600000 0 0x58000>;
			reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base";
			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
		};

		eud: eud@88e0000 {
			compatible = "qcom,sc7280-eud", "qcom,eud";
			reg = <0 0x88e0000 0 0x2000>,
			      <0 0x88e2000 0 0x1000>;
			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					eud_ep: endpoint {
						remote-endpoint = <&usb2_role_switch>;
					};
				};
			};
		};

		nsp_noc: interconnect@a0c0000 {
			reg = <0 0x0a0c0000 0 0x10000>;
			compatible = "qcom,sc7280-nsp-noc";
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		remoteproc_cdsp: remoteproc@a300000 {
			compatible = "qcom,sc7280-cdsp-pas";
			reg = <0 0x0a300000 0 0x10000>;

			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready", "handover",
					  "stop-ack", "shutdown-ack";

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "xo";

			power-domains = <&rpmhpd SC7280_CX>,
					<&rpmhpd SC7280_MX>;
			power-domain-names = "cx", "mx";

			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;

			memory-region = <&cdsp_mem>;

			qcom,qmp = <&aoss_qmp>;

			qcom,smem-states = <&cdsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_CDSP
						IPCC_MPROC_SIGNAL_GLINK_QMP>;

				label = "cdsp";
				qcom,remote-pid = <5>;

				fastrpc {
					compatible = "qcom,fastrpc";
					qcom,glink-channels = "fastrpcglink-apps-dsp";
					label = "cdsp";
					qcom,non-secure-domain;
					#address-cells = <1>;
					#size-cells = <0>;

					compute-cb@1 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <1>;
						iommus = <&apps_smmu 0x11a1 0x0420>,
							 <&apps_smmu 0x1181 0x0420>;
					};

					compute-cb@2 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <2>;
						iommus = <&apps_smmu 0x11a2 0x0420>,
							 <&apps_smmu 0x1182 0x0420>;
					};

					compute-cb@3 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <3>;
						iommus = <&apps_smmu 0x11a3 0x0420>,
							 <&apps_smmu 0x1183 0x0420>;
					};

					compute-cb@4 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <4>;
						iommus = <&apps_smmu 0x11a4 0x0420>,
							 <&apps_smmu 0x1184 0x0420>;
					};

					compute-cb@5 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <5>;
						iommus = <&apps_smmu 0x11a5 0x0420>,
							 <&apps_smmu 0x1185 0x0420>;
					};

					compute-cb@6 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <6>;
						iommus = <&apps_smmu 0x11a6 0x0420>,
							 <&apps_smmu 0x1186 0x0420>;
					};

					compute-cb@7 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <7>;
						iommus = <&apps_smmu 0x11a7 0x0420>,
							 <&apps_smmu 0x1187 0x0420>;
					};

					compute-cb@8 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <8>;
						iommus = <&apps_smmu 0x11a8 0x0420>,
							 <&apps_smmu 0x1188 0x0420>;
					};

					/* note: secure cb9 in downstream */

					compute-cb@11 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <11>;
						iommus = <&apps_smmu 0x11ab 0x0420>,
							 <&apps_smmu 0x118b 0x0420>;
					};

					compute-cb@12 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <12>;
						iommus = <&apps_smmu 0x11ac 0x0420>,
							 <&apps_smmu 0x118c 0x0420>;
					};

					compute-cb@13 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <13>;
						iommus = <&apps_smmu 0x11ad 0x0420>,
							 <&apps_smmu 0x118d 0x0420>;
					};

					compute-cb@14 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <14>;
						iommus = <&apps_smmu 0x11ae 0x0420>,
							 <&apps_smmu 0x118e 0x0420>;
					};
				};
			};
		};

		usb_1: usb@a6f8800 {
			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
			reg = <0 0x0a6f8800 0 0x400>;
			status = "disabled";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			dma-ranges;

			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
			clock-names = "cfg_noc",
				      "core",
				      "iface",
				      "sleep",
				      "mock_utmi";

			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
			assigned-clock-rates = <19200000>, <200000000>;

			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "pwr_event",
					  "hs_phy_irq",
					  "dp_hs_phy_irq",
					  "dm_hs_phy_irq",
					  "ss_phy_irq";

			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
			required-opps = <&rpmhpd_opp_nom>;

			resets = <&gcc GCC_USB30_PRIM_BCR>;

			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>;
			interconnect-names = "usb-ddr", "apps-usb";

			wakeup-source;

			usb_1_dwc3: usb@a600000 {
				compatible = "snps,dwc3";
				reg = <0 0x0a600000 0 0xe000>;
				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
				iommus = <&apps_smmu 0xe0 0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_enblslpm_quirk;
				snps,parkmode-disable-ss-quirk;
				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
				phy-names = "usb2-phy", "usb3-phy";
				maximum-speed = "super-speed";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						usb_1_dwc3_hs: endpoint {
						};
					};

					port@1 {
						reg = <1>;

						usb_1_dwc3_ss: endpoint {
						};
					};
				};
			};
		};

		venus: video-codec@aa00000 {
			compatible = "qcom,sc7280-venus";
			reg = <0 0x0aa00000 0 0xd0600>;
			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
				 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
				 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
				 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
			clock-names = "core", "bus", "iface",
				      "vcodec_core", "vcodec_bus";

			power-domains = <&videocc MVSC_GDSC>,
					<&videocc MVS0_GDSC>,
					<&rpmhpd SC7280_CX>;
			power-domain-names = "venus", "vcodec0", "cx";
			operating-points-v2 = <&venus_opp_table>;

			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
			interconnect-names = "cpu-cfg", "video-mem";

			iommus = <&apps_smmu 0x2180 0x20>;
			memory-region = <&video_mem>;

			status = "disabled";

			video-decoder {
				compatible = "venus-decoder";
			};

			video-encoder {
				compatible = "venus-encoder";
			};

			venus_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-133330000 {
					opp-hz = /bits/ 64 <133330000>;
					required-opps = <&rpmhpd_opp_low_svs>;
				};

				opp-240000000 {
					opp-hz = /bits/ 64 <240000000>;
					required-opps = <&rpmhpd_opp_svs>;
				};

				opp-335000000 {
					opp-hz = /bits/ 64 <335000000>;
					required-opps = <&rpmhpd_opp_svs_l1>;
				};

				opp-424000000 {
					opp-hz = /bits/ 64 <424000000>;
					required-opps = <&rpmhpd_opp_nom>;
				};

				opp-460000048 {
					opp-hz = /bits/ 64 <460000048>;
					required-opps = <&rpmhpd_opp_turbo>;
				};
			};
		};

		videocc: clock-controller@aaf0000 {
			compatible = "qcom,sc7280-videocc";
			reg = <0 0x0aaf0000 0 0x10000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				<&rpmhcc RPMH_CXO_CLK_A>;
			clock-names = "bi_tcxo", "bi_tcxo_ao";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		cci0: cci@ac4a000 {
			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
			reg = <0 0x0ac4a000 0 0x1000>;
			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;

			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
				 <&camcc CAM_CC_CPAS_AHB_CLK>,
				 <&camcc CAM_CC_CCI_0_CLK>,
				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
			clock-names = "camnoc_axi",
				      "slow_ahb_src",
				      "cpas_ahb",
				      "cci",
				      "cci_src";
			pinctrl-0 = <&cci0_default &cci1_default>;
			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
			pinctrl-names = "default", "sleep";

			#address-cells = <1>;
			#size-cells = <0>;

			status = "disabled";

			cci0_i2c0: i2c-bus@0 {
				reg = <0>;
				clock-frequency = <1000000>;
				#address-cells = <1>;
				#size-cells = <0>;
			};

			cci0_i2c1: i2c-bus@1 {
				reg = <1>;
				clock-frequency = <1000000>;
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		cci1: cci@ac4b000 {
			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
			reg = <0 0x0ac4b000 0 0x1000>;
			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;

			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
				 <&camcc CAM_CC_CPAS_AHB_CLK>,
				 <&camcc CAM_CC_CCI_1_CLK>,
				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
			clock-names = "camnoc_axi",
				      "slow_ahb_src",
				      "cpas_ahb",
				      "cci",
				      "cci_src";
			pinctrl-0 = <&cci2_default &cci3_default>;
			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
			pinctrl-names = "default", "sleep";

			#address-cells = <1>;
			#size-cells = <0>;

			status = "disabled";

			cci1_i2c0: i2c-bus@0 {
				reg = <0>;
				clock-frequency = <1000000>;
				#address-cells = <1>;
				#size-cells = <0>;
			};

			cci1_i2c1: i2c-bus@1 {
				reg = <1>;
				clock-frequency = <1000000>;
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		camcc: clock-controller@ad00000 {
			compatible = "qcom,sc7280-camcc";
			reg = <0 0x0ad00000 0 0x10000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				<&rpmhcc RPMH_CXO_CLK_A>,
				<&sleep_clk>;
			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		dispcc: clock-controller@af00000 {
			compatible = "qcom,sc7280-dispcc";
			reg = <0 0x0af00000 0 0x20000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
				 <&mdss_dsi_phy 0>,
				 <&mdss_dsi_phy 1>,
				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
				 <&mdss_edp_phy 0>,
				 <&mdss_edp_phy 1>;
			clock-names = "bi_tcxo",
				      "gcc_disp_gpll0_clk",
				      "dsi0_phy_pll_out_byteclk",
				      "dsi0_phy_pll_out_dsiclk",
				      "dp_phy_pll_link_clk",
				      "dp_phy_pll_vco_div_clk",
				      "edp_phy_pll_link_clk",
				      "edp_phy_pll_vco_div_clk";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		mdss: display-subsystem@ae00000 {
			compatible = "qcom,sc7280-mdss";
			reg = <0 0x0ae00000 0 0x1000>;
			reg-names = "mdss";

			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;

			clocks = <&gcc GCC_DISP_AHB_CLK>,
				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
				<&dispcc DISP_CC_MDSS_MDP_CLK>;
			clock-names = "iface",
				      "ahb",
				      "core";

			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <1>;

			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
			interconnect-names = "mdp0-mem",
					     "cpu-cfg";

			iommus = <&apps_smmu 0x900 0x402>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			status = "disabled";

			mdss_mdp: display-controller@ae01000 {
				compatible = "qcom,sc7280-dpu";
				reg = <0 0x0ae01000 0 0x8f030>,
					<0 0x0aeb0000 0 0x2008>;
				reg-names = "mdp", "vbif";

				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
					<&gcc GCC_DISP_SF_AXI_CLK>,
					<&dispcc DISP_CC_MDSS_AHB_CLK>,
					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
					<&dispcc DISP_CC_MDSS_MDP_CLK>,
					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
				clock-names = "bus",
					      "nrt_bus",
					      "iface",
					      "lut",
					      "core",
					      "vsync";
				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
						<&dispcc DISP_CC_MDSS_AHB_CLK>;
				assigned-clock-rates = <19200000>,
							<19200000>;
				operating-points-v2 = <&mdp_opp_table>;
				power-domains = <&rpmhpd SC7280_CX>;

				interrupt-parent = <&mdss>;
				interrupts = <0>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						dpu_intf1_out: endpoint {
							remote-endpoint = <&mdss_dsi0_in>;
						};
					};

					port@1 {
						reg = <1>;
						dpu_intf5_out: endpoint {
							remote-endpoint = <&edp_in>;
						};
					};

					port@2 {
						reg = <2>;
						dpu_intf0_out: endpoint {
							remote-endpoint = <&dp_in>;
						};
					};
				};

				mdp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-200000000 {
						opp-hz = /bits/ 64 <200000000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-300000000 {
						opp-hz = /bits/ 64 <300000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-380000000 {
						opp-hz = /bits/ 64 <380000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};

					opp-506666667 {
						opp-hz = /bits/ 64 <506666667>;
						required-opps = <&rpmhpd_opp_nom>;
					};

					opp-608000000 {
						opp-hz = /bits/ 64 <608000000>;
						required-opps = <&rpmhpd_opp_turbo>;
					};
				};
			};

			mdss_dsi: dsi@ae94000 {
				compatible = "qcom,sc7280-dsi-ctrl",
					     "qcom,mdss-dsi-ctrl";
				reg = <0 0x0ae94000 0 0x400>;
				reg-names = "dsi_ctrl";

				interrupt-parent = <&mdss>;
				interrupts = <4>;

				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&gcc GCC_DISP_HF_AXI_CLK>;
				clock-names = "byte",
					      "byte_intf",
					      "pixel",
					      "core",
					      "iface",
					      "bus";

				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;

				operating-points-v2 = <&dsi_opp_table>;
				power-domains = <&rpmhpd SC7280_CX>;

				phys = <&mdss_dsi_phy>;

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						mdss_dsi0_in: endpoint {
							remote-endpoint = <&dpu_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;
						mdss_dsi0_out: endpoint {
						};
					};
				};

				dsi_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-187500000 {
						opp-hz = /bits/ 64 <187500000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-300000000 {
						opp-hz = /bits/ 64 <300000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-358000000 {
						opp-hz = /bits/ 64 <358000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};
				};
			};

			mdss_dsi_phy: phy@ae94400 {
				compatible = "qcom,sc7280-dsi-phy-7nm";
				reg = <0 0x0ae94400 0 0x200>,
				      <0 0x0ae94600 0 0x280>,
				      <0 0x0ae94900 0 0x280>;
				reg-names = "dsi_phy",
					    "dsi_phy_lane",
					    "dsi_pll";

				#clock-cells = <1>;
				#phy-cells = <0>;

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&rpmhcc RPMH_CXO_CLK>;
				clock-names = "iface", "ref";

				status = "disabled";
			};

			mdss_edp: edp@aea0000 {
				compatible = "qcom,sc7280-edp";
				pinctrl-names = "default";
				pinctrl-0 = <&edp_hot_plug_det>;

				reg = <0 0x0aea0000 0 0x200>,
				      <0 0x0aea0200 0 0x200>,
				      <0 0x0aea0400 0 0xc00>,
				      <0 0x0aea1000 0 0x400>;

				interrupt-parent = <&mdss>;
				interrupts = <14>;

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
					 <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
					 <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
				clock-names = "core_iface",
					      "core_aux",
					      "ctrl_link",
					      "ctrl_link_iface",
					      "stream_pixel";
				assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
						  <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
				assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;

				phys = <&mdss_edp_phy>;
				phy-names = "dp";

				operating-points-v2 = <&edp_opp_table>;
				power-domains = <&rpmhpd SC7280_CX>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						edp_in: endpoint {
							remote-endpoint = <&dpu_intf5_out>;
						};
					};

					port@1 {
						reg = <1>;
						mdss_edp_out: endpoint { };
					};
				};

				edp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-160000000 {
						opp-hz = /bits/ 64 <160000000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-270000000 {
						opp-hz = /bits/ 64 <270000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-540000000 {
						opp-hz = /bits/ 64 <540000000>;
						required-opps = <&rpmhpd_opp_nom>;
					};

					opp-810000000 {
						opp-hz = /bits/ 64 <810000000>;
						required-opps = <&rpmhpd_opp_nom>;
					};
				};
			};

			mdss_edp_phy: phy@aec2a00 {
				compatible = "qcom,sc7280-edp-phy";

				reg = <0 0x0aec2a00 0 0x19c>,
				      <0 0x0aec2200 0 0xa0>,
				      <0 0x0aec2600 0 0xa0>,
				      <0 0x0aec2000 0 0x1c0>;

				clocks = <&rpmhcc RPMH_CXO_CLK>,
					 <&gcc GCC_EDP_CLKREF_EN>;
				clock-names = "aux",
					      "cfg_ahb";

				#clock-cells = <1>;
				#phy-cells = <0>;

				status = "disabled";
			};

			mdss_dp: displayport-controller@ae90000 {
				compatible = "qcom,sc7280-dp";

				reg = <0 0x0ae90000 0 0x200>,
				      <0 0x0ae90200 0 0x200>,
				      <0 0x0ae90400 0 0xc00>,
				      <0 0x0ae91000 0 0x400>,
				      <0 0x0ae91400 0 0x400>;

				interrupt-parent = <&mdss>;
				interrupts = <12>;

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
				clock-names = "core_iface",
						"core_aux",
						"ctrl_link",
						"ctrl_link_iface",
						"stream_pixel";
				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
				phy-names = "dp";

				operating-points-v2 = <&dp_opp_table>;
				power-domains = <&rpmhpd SC7280_CX>;

				#sound-dai-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						dp_in: endpoint {
							remote-endpoint = <&dpu_intf0_out>;
						};
					};

					port@1 {
						reg = <1>;
						mdss_dp_out: endpoint { };
					};
				};

				dp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-160000000 {
						opp-hz = /bits/ 64 <160000000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-270000000 {
						opp-hz = /bits/ 64 <270000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-540000000 {
						opp-hz = /bits/ 64 <540000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};

					opp-810000000 {
						opp-hz = /bits/ 64 <810000000>;
						required-opps = <&rpmhpd_opp_nom>;
					};
				};
			};
		};

		pdc: interrupt-controller@b220000 {
			compatible = "qcom,sc7280-pdc", "qcom,pdc";
			reg = <0 0x0b220000 0 0x30000>;
			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,
					  <55 306 4>, <59 312 3>, <62 374 2>,
					  <64 434 2>, <66 438 3>, <69 86 1>,
					  <70 520 54>, <124 609 31>, <155 63 1>,
					  <156 716 12>;
			#interrupt-cells = <2>;
			interrupt-parent = <&intc>;
			interrupt-controller;
		};

		pdc_reset: reset-controller@b5e0000 {
			compatible = "qcom,sc7280-pdc-global";
			reg = <0 0x0b5e0000 0 0x20000>;
			#reset-cells = <1>;
			status = "reserved"; /* Owned by firmware */
		};

		tsens0: thermal-sensor@c263000 {
			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
			reg = <0 0x0c263000 0 0x1ff>, /* TM */
				<0 0x0c222000 0 0x1ff>; /* SROT */
			#qcom,sensors = <15>;
			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow","critical";
			#thermal-sensor-cells = <1>;
		};

		tsens1: thermal-sensor@c265000 {
			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
			reg = <0 0x0c265000 0 0x1ff>, /* TM */
				<0 0x0c223000 0 0x1ff>; /* SROT */
			#qcom,sensors = <12>;
			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow","critical";
			#thermal-sensor-cells = <1>;
		};

		aoss_reset: reset-controller@c2a0000 {
			compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc";
			reg = <0 0x0c2a0000 0 0x31000>;
			#reset-cells = <1>;
		};

		aoss_qmp: power-management@c300000 {
			compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
			reg = <0 0x0c300000 0 0x400>;
			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
						     IPCC_MPROC_SIGNAL_GLINK_QMP
						     IRQ_TYPE_EDGE_RISING>;
			mboxes = <&ipcc IPCC_CLIENT_AOP
					IPCC_MPROC_SIGNAL_GLINK_QMP>;

			#clock-cells = <0>;
		};

		sram@c3f0000 {
			compatible = "qcom,rpmh-stats";
			reg = <0 0x0c3f0000 0 0x400>;
		};

		spmi_bus: spmi@c440000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0 0x0c440000 0 0x1100>,
			      <0 0x0c600000 0 0x2000000>,
			      <0 0x0e600000 0 0x100000>,
			      <0 0x0e700000 0 0xa0000>,
			      <0 0x0c40a000 0 0x26000>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		tlmm: pinctrl@f100000 {
			compatible = "qcom,sc7280-pinctrl";
			reg = <0 0x0f100000 0 0x300000>;
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			gpio-ranges = <&tlmm 0 0 175>;
			wakeup-parent = <&pdc>;

			cci0_default: cci0-default-state {
				pins = "gpio69", "gpio70";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-up;
			};

			cci0_sleep: cci0-sleep-state {
				pins = "gpio69", "gpio70";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-down;
			};

			cci1_default: cci1-default-state {
				pins = "gpio71", "gpio72";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-up;
			};

			cci1_sleep: cci1-sleep-state {
				pins = "gpio71", "gpio72";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-down;
			};

			cci2_default: cci2-default-state {
				pins = "gpio73", "gpio74";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-up;
			};

			cci2_sleep: cci2-sleep-state {
				pins = "gpio73", "gpio74";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-down;
			};

			cci3_default: cci3-default-state {
				pins = "gpio75", "gpio76";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-up;
			};

			cci3_sleep: cci3-sleep-state {
				pins = "gpio75", "gpio76";
				function = "cci_i2c";
				drive-strength = <2>;
				bias-pull-down;
			};

			dp_hot_plug_det: dp-hot-plug-det-state {
				pins = "gpio47";
				function = "dp_hot";
			};

			edp_hot_plug_det: edp-hot-plug-det-state {
				pins = "gpio60";
				function = "edp_hot";
			};

			mi2s0_data0: mi2s0-data0-state {
				pins = "gpio98";
				function = "mi2s0_data0";
			};

			mi2s0_data1: mi2s0-data1-state {
				pins = "gpio99";
				function = "mi2s0_data1";
			};

			mi2s0_mclk: mi2s0-mclk-state {
				pins = "gpio96";
				function = "pri_mi2s";
			};

			mi2s0_sclk: mi2s0-sclk-state {
				pins = "gpio97";
				function = "mi2s0_sck";
			};

			mi2s0_ws: mi2s0-ws-state {
				pins = "gpio100";
				function = "mi2s0_ws";
			};

			mi2s1_data0: mi2s1-data0-state {
				pins = "gpio107";
				function = "mi2s1_data0";
			};

			mi2s1_sclk: mi2s1-sclk-state {
				pins = "gpio106";
				function = "mi2s1_sck";
			};

			mi2s1_ws: mi2s1-ws-state {
				pins = "gpio108";
				function = "mi2s1_ws";
			};

			pcie1_clkreq_n: pcie1-clkreq-n-state {
				pins = "gpio79";
				function = "pcie1_clkreqn";
			};

			qspi_clk: qspi-clk-state {
				pins = "gpio14";
				function = "qspi_clk";
			};

			qspi_cs0: qspi-cs0-state {
				pins = "gpio15";
				function = "qspi_cs";
			};

			qspi_cs1: qspi-cs1-state {
				pins = "gpio19";
				function = "qspi_cs";
			};

			qspi_data0: qspi-data0-state {
				pins = "gpio12";
				function = "qspi_data";
			};

			qspi_data1: qspi-data1-state {
				pins = "gpio13";
				function = "qspi_data";
			};

			qspi_data23: qspi-data23-state {
				pins = "gpio16", "gpio17";
				function = "qspi_data";
			};

			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
				pins = "gpio0", "gpio1";
				function = "qup00";
			};

			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
				pins = "gpio4", "gpio5";
				function = "qup01";
			};

			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
				pins = "gpio8", "gpio9";
				function = "qup02";
			};

			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
				pins = "gpio12", "gpio13";
				function = "qup03";
			};

			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
				pins = "gpio16", "gpio17";
				function = "qup04";
			};

			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
				pins = "gpio20", "gpio21";
				function = "qup05";
			};

			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
				pins = "gpio24", "gpio25";
				function = "qup06";
			};

			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
				pins = "gpio28", "gpio29";
				function = "qup07";
			};

			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
				pins = "gpio32", "gpio33";
				function = "qup10";
			};

			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
				pins = "gpio36", "gpio37";
				function = "qup11";
			};

			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
				pins = "gpio40", "gpio41";
				function = "qup12";
			};

			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
				pins = "gpio44", "gpio45";
				function = "qup13";
			};

			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
				pins = "gpio48", "gpio49";
				function = "qup14";
			};

			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
				pins = "gpio52", "gpio53";
				function = "qup15";
			};

			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
				pins = "gpio56", "gpio57";
				function = "qup16";
			};

			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
				pins = "gpio60", "gpio61";
				function = "qup17";
			};

			qup_spi0_data_clk: qup-spi0-data-clk-state {
				pins = "gpio0", "gpio1", "gpio2";
				function = "qup00";
			};

			qup_spi0_cs: qup-spi0-cs-state {
				pins = "gpio3";
				function = "qup00";
			};

			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
				pins = "gpio3";
				function = "gpio";
			};

			qup_spi1_data_clk: qup-spi1-data-clk-state {
				pins = "gpio4", "gpio5", "gpio6";
				function = "qup01";
			};

			qup_spi1_cs: qup-spi1-cs-state {
				pins = "gpio7";
				function = "qup01";
			};

			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
				pins = "gpio7";
				function = "gpio";
			};

			qup_spi2_data_clk: qup-spi2-data-clk-state {
				pins = "gpio8", "gpio9", "gpio10";
				function = "qup02";
			};

			qup_spi2_cs: qup-spi2-cs-state {
				pins = "gpio11";
				function = "qup02";
			};

			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
				pins = "gpio11";
				function = "gpio";
			};

			qup_spi3_data_clk: qup-spi3-data-clk-state {
				pins = "gpio12", "gpio13", "gpio14";
				function = "qup03";
			};

			qup_spi3_cs: qup-spi3-cs-state {
				pins = "gpio15";
				function = "qup03";
			};

			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
				pins = "gpio15";
				function = "gpio";
			};

			qup_spi4_data_clk: qup-spi4-data-clk-state {
				pins = "gpio16", "gpio17", "gpio18";
				function = "qup04";
			};

			qup_spi4_cs: qup-spi4-cs-state {
				pins = "gpio19";
				function = "qup04";
			};

			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
				pins = "gpio19";
				function = "gpio";
			};

			qup_spi5_data_clk: qup-spi5-data-clk-state {
				pins = "gpio20", "gpio21", "gpio22";
				function = "qup05";
			};

			qup_spi5_cs: qup-spi5-cs-state {
				pins = "gpio23";
				function = "qup05";
			};

			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
				pins = "gpio23";
				function = "gpio";
			};

			qup_spi6_data_clk: qup-spi6-data-clk-state {
				pins = "gpio24", "gpio25", "gpio26";
				function = "qup06";
			};

			qup_spi6_cs: qup-spi6-cs-state {
				pins = "gpio27";
				function = "qup06";
			};

			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
				pins = "gpio27";
				function = "gpio";
			};

			qup_spi7_data_clk: qup-spi7-data-clk-state {
				pins = "gpio28", "gpio29", "gpio30";
				function = "qup07";
			};

			qup_spi7_cs: qup-spi7-cs-state {
				pins = "gpio31";
				function = "qup07";
			};

			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
				pins = "gpio31";
				function = "gpio";
			};

			qup_spi8_data_clk: qup-spi8-data-clk-state {
				pins = "gpio32", "gpio33", "gpio34";
				function = "qup10";
			};

			qup_spi8_cs: qup-spi8-cs-state {
				pins = "gpio35";
				function = "qup10";
			};

			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
				pins = "gpio35";
				function = "gpio";
			};

			qup_spi9_data_clk: qup-spi9-data-clk-state {
				pins = "gpio36", "gpio37", "gpio38";
				function = "qup11";
			};

			qup_spi9_cs: qup-spi9-cs-state {
				pins = "gpio39";
				function = "qup11";
			};

			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
				pins = "gpio39";
				function = "gpio";
			};

			qup_spi10_data_clk: qup-spi10-data-clk-state {
				pins = "gpio40", "gpio41", "gpio42";
				function = "qup12";
			};

			qup_spi10_cs: qup-spi10-cs-state {
				pins = "gpio43";
				function = "qup12";
			};

			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
				pins = "gpio43";
				function = "gpio";
			};

			qup_spi11_data_clk: qup-spi11-data-clk-state {
				pins = "gpio44", "gpio45", "gpio46";
				function = "qup13";
			};

			qup_spi11_cs: qup-spi11-cs-state {
				pins = "gpio47";
				function = "qup13";
			};

			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
				pins = "gpio47";
				function = "gpio";
			};

			qup_spi12_data_clk: qup-spi12-data-clk-state {
				pins = "gpio48", "gpio49", "gpio50";
				function = "qup14";
			};

			qup_spi12_cs: qup-spi12-cs-state {
				pins = "gpio51";
				function = "qup14";
			};

			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
				pins = "gpio51";
				function = "gpio";
			};

			qup_spi13_data_clk: qup-spi13-data-clk-state {
				pins = "gpio52", "gpio53", "gpio54";
				function = "qup15";
			};

			qup_spi13_cs: qup-spi13-cs-state {
				pins = "gpio55";
				function = "qup15";
			};

			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
				pins = "gpio55";
				function = "gpio";
			};

			qup_spi14_data_clk: qup-spi14-data-clk-state {
				pins = "gpio56", "gpio57", "gpio58";
				function = "qup16";
			};

			qup_spi14_cs: qup-spi14-cs-state {
				pins = "gpio59";
				function = "qup16";
			};

			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
				pins = "gpio59";
				function = "gpio";
			};

			qup_spi15_data_clk: qup-spi15-data-clk-state {
				pins = "gpio60", "gpio61", "gpio62";
				function = "qup17";
			};

			qup_spi15_cs: qup-spi15-cs-state {
				pins = "gpio63";
				function = "qup17";
			};

			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
				pins = "gpio63";
				function = "gpio";
			};

			qup_uart0_cts: qup-uart0-cts-state {
				pins = "gpio0";
				function = "qup00";
			};

			qup_uart0_rts: qup-uart0-rts-state {
				pins = "gpio1";
				function = "qup00";
			};

			qup_uart0_tx: qup-uart0-tx-state {
				pins = "gpio2";
				function = "qup00";
			};

			qup_uart0_rx: qup-uart0-rx-state {
				pins = "gpio3";
				function = "qup00";
			};

			qup_uart1_cts: qup-uart1-cts-state {
				pins = "gpio4";
				function = "qup01";
			};

			qup_uart1_rts: qup-uart1-rts-state {
				pins = "gpio5";
				function = "qup01";
			};

			qup_uart1_tx: qup-uart1-tx-state {
				pins = "gpio6";
				function = "qup01";
			};

			qup_uart1_rx: qup-uart1-rx-state {
				pins = "gpio7";
				function = "qup01";
			};

			qup_uart2_cts: qup-uart2-cts-state {
				pins = "gpio8";
				function = "qup02";
			};

			qup_uart2_rts: qup-uart2-rts-state {
				pins = "gpio9";
				function = "qup02";
			};

			qup_uart2_tx: qup-uart2-tx-state {
				pins = "gpio10";
				function = "qup02";
			};

			qup_uart2_rx: qup-uart2-rx-state {
				pins = "gpio11";
				function = "qup02";
			};

			qup_uart3_cts: qup-uart3-cts-state {
				pins = "gpio12";
				function = "qup03";
			};

			qup_uart3_rts: qup-uart3-rts-state {
				pins = "gpio13";
				function = "qup03";
			};

			qup_uart3_tx: qup-uart3-tx-state {
				pins = "gpio14";
				function = "qup03";
			};

			qup_uart3_rx: qup-uart3-rx-state {
				pins = "gpio15";
				function = "qup03";
			};

			qup_uart4_cts: qup-uart4-cts-state {
				pins = "gpio16";
				function = "qup04";
			};

			qup_uart4_rts: qup-uart4-rts-state {
				pins = "gpio17";
				function = "qup04";
			};

			qup_uart4_tx: qup-uart4-tx-state {
				pins = "gpio18";
				function = "qup04";
			};

			qup_uart4_rx: qup-uart4-rx-state {
				pins = "gpio19";
				function = "qup04";
			};

			qup_uart5_tx: qup-uart5-tx-state {
				pins = "gpio22";
				function = "qup05";
			};

			qup_uart5_rx: qup-uart5-rx-state {
				pins = "gpio23";
				function = "qup05";
			};

			qup_uart6_cts: qup-uart6-cts-state {
				pins = "gpio24";
				function = "qup06";
			};

			qup_uart6_rts: qup-uart6-rts-state {
				pins = "gpio25";
				function = "qup06";
			};

			qup_uart6_tx: qup-uart6-tx-state {
				pins = "gpio26";
				function = "qup06";
			};

			qup_uart6_rx: qup-uart6-rx-state {
				pins = "gpio27";
				function = "qup06";
			};

			qup_uart7_cts: qup-uart7-cts-state {
				pins = "gpio28";
				function = "qup07";
			};

			qup_uart7_rts: qup-uart7-rts-state {
				pins = "gpio29";
				function = "qup07";
			};

			qup_uart7_tx: qup-uart7-tx-state {
				pins = "gpio30";
				function = "qup07";
			};

			qup_uart7_rx: qup-uart7-rx-state {
				pins = "gpio31";
				function = "qup07";
			};

			qup_uart8_cts: qup-uart8-cts-state {
				pins = "gpio32";
				function = "qup10";
			};

			qup_uart8_rts: qup-uart8-rts-state {
				pins = "gpio33";
				function = "qup10";
			};

			qup_uart8_tx: qup-uart8-tx-state {
				pins = "gpio34";
				function = "qup10";
			};

			qup_uart8_rx: qup-uart8-rx-state {
				pins = "gpio35";
				function = "qup10";
			};

			qup_uart9_cts: qup-uart9-cts-state {
				pins = "gpio36";
				function = "qup11";
			};

			qup_uart9_rts: qup-uart9-rts-state {
				pins = "gpio37";
				function = "qup11";
			};

			qup_uart9_tx: qup-uart9-tx-state {
				pins = "gpio38";
				function = "qup11";
			};

			qup_uart9_rx: qup-uart9-rx-state {
				pins = "gpio39";
				function = "qup11";
			};

			qup_uart10_cts: qup-uart10-cts-state {
				pins = "gpio40";
				function = "qup12";
			};

			qup_uart10_rts: qup-uart10-rts-state {
				pins = "gpio41";
				function = "qup12";
			};

			qup_uart10_tx: qup-uart10-tx-state {
				pins = "gpio42";
				function = "qup12";
			};

			qup_uart10_rx: qup-uart10-rx-state {
				pins = "gpio43";
				function = "qup12";
			};

			qup_uart11_cts: qup-uart11-cts-state {
				pins = "gpio44";
				function = "qup13";
			};

			qup_uart11_rts: qup-uart11-rts-state {
				pins = "gpio45";
				function = "qup13";
			};

			qup_uart11_tx: qup-uart11-tx-state {
				pins = "gpio46";
				function = "qup13";
			};

			qup_uart11_rx: qup-uart11-rx-state {
				pins = "gpio47";
				function = "qup13";
			};

			qup_uart12_cts: qup-uart12-cts-state {
				pins = "gpio48";
				function = "qup14";
			};

			qup_uart12_rts: qup-uart12-rts-state {
				pins = "gpio49";
				function = "qup14";
			};

			qup_uart12_tx: qup-uart12-tx-state {
				pins = "gpio50";
				function = "qup14";
			};

			qup_uart12_rx: qup-uart12-rx-state {
				pins = "gpio51";
				function = "qup14";
			};

			qup_uart13_cts: qup-uart13-cts-state {
				pins = "gpio52";
				function = "qup15";
			};

			qup_uart13_rts: qup-uart13-rts-state {
				pins = "gpio53";
				function = "qup15";
			};

			qup_uart13_tx: qup-uart13-tx-state {
				pins = "gpio54";
				function = "qup15";
			};

			qup_uart13_rx: qup-uart13-rx-state {
				pins = "gpio55";
				function = "qup15";
			};

			qup_uart14_cts: qup-uart14-cts-state {
				pins = "gpio56";
				function = "qup16";
			};

			qup_uart14_rts: qup-uart14-rts-state {
				pins = "gpio57";
				function = "qup16";
			};

			qup_uart14_tx: qup-uart14-tx-state {
				pins = "gpio58";
				function = "qup16";
			};

			qup_uart14_rx: qup-uart14-rx-state {
				pins = "gpio59";
				function = "qup16";
			};

			qup_uart15_cts: qup-uart15-cts-state {
				pins = "gpio60";
				function = "qup17";
			};

			qup_uart15_rts: qup-uart15-rts-state {
				pins = "gpio61";
				function = "qup17";
			};

			qup_uart15_tx: qup-uart15-tx-state {
				pins = "gpio62";
				function = "qup17";
			};

			qup_uart15_rx: qup-uart15-rx-state {
				pins = "gpio63";
				function = "qup17";
			};

			sdc1_clk: sdc1-clk-state {
				pins = "sdc1_clk";
			};

			sdc1_cmd: sdc1-cmd-state {
				pins = "sdc1_cmd";
			};

			sdc1_data: sdc1-data-state {
				pins = "sdc1_data";
			};

			sdc1_rclk: sdc1-rclk-state {
				pins = "sdc1_rclk";
			};

			sdc1_clk_sleep: sdc1-clk-sleep-state {
				pins = "sdc1_clk";
				drive-strength = <2>;
				bias-bus-hold;
			};

			sdc1_cmd_sleep: sdc1-cmd-sleep-state {
				pins = "sdc1_cmd";
				drive-strength = <2>;
				bias-bus-hold;
			};

			sdc1_data_sleep: sdc1-data-sleep-state {
				pins = "sdc1_data";
				drive-strength = <2>;
				bias-bus-hold;
			};

			sdc1_rclk_sleep: sdc1-rclk-sleep-state {
				pins = "sdc1_rclk";
				drive-strength = <2>;
				bias-bus-hold;
			};

			sdc2_clk: sdc2-clk-state {
				pins = "sdc2_clk";
			};

			sdc2_cmd: sdc2-cmd-state {
				pins = "sdc2_cmd";
			};

			sdc2_data: sdc2-data-state {
				pins = "sdc2_data";
			};

			sdc2_clk_sleep: sdc2-clk-sleep-state {
				pins = "sdc2_clk";
				drive-strength = <2>;
				bias-bus-hold;
			};

			sdc2_cmd_sleep: sdc2-cmd-sleep-state {
				pins = "sdc2_cmd";
				drive-strength = <2>;
				bias-bus-hold;
			};

			sdc2_data_sleep: sdc2-data-sleep-state {
				pins = "sdc2_data";
				drive-strength = <2>;
				bias-bus-hold;
			};
		};

		sram@146a5000 {
			compatible = "qcom,sc7280-imem", "syscon", "simple-mfd";
			reg = <0 0x146a5000 0 0x6000>;

			#address-cells = <1>;
			#size-cells = <1>;

			ranges = <0 0 0x146a5000 0x6000>;

			pil-reloc@594c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x594c 0xc8>;
			};
		};

		apps_smmu: iommu@15000000 {
			compatible = "qcom,sc7280-smmu-500", "arm,mmu-500";
			reg = <0 0x15000000 0 0x100000>;
			#iommu-cells = <2>;
			#global-interrupts = <1>;
			dma-coherent;
			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
		};

		anoc_1_tbu: tbu@151dd000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151dd000 0x0 0x1000>;
			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
			qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
		};

		anoc_2_tbu: tbu@151e1000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151e1000 0x0 0x1000>;
			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
			qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
		};

		mnoc_hf_0_tbu: tbu@151e5000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151e5000 0x0 0x1000>;
			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>;
			qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
		};

		mnoc_hf_1_tbu: tbu@151e9000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151e9000 0x0 0x1000>;
			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>;
			qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
		};

		compute_dsp_1_tbu: tbu@151ed000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151ed000 0x0 0x1000>;
			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
			power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>;
			qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
		};

		compute_dsp_0_tbu: tbu@151f1000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151f1000 0x0 0x1000>;
			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
			power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
			qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
		};

		adsp_tbu: tbu@151f5000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151f5000 0x0 0x1000>;
			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
			qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
		};

		anoc_1_pcie_tbu: tbu@151f9000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151f9000 0x0 0x1000>;
			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
			qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
		};

		mnoc_sf_0_tbu: tbu@151fd000 {
			compatible = "qcom,sc7280-tbu";
			reg = <0x0 0x151fd000 0x0 0x1000>;
			interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>;
			qcom,stream-id-range = <&apps_smmu 0x2000 0x400>;
		};

		intc: interrupt-controller@17a00000 {
			compatible = "arm,gic-v3";
			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
			#interrupt-cells = <3>;
			interrupt-controller;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			msi-controller@17a40000 {
				compatible = "arm,gic-v3-its";
				reg = <0 0x17a40000 0 0x20000>;
				msi-controller;
				#msi-cells = <1>;
				status = "disabled";
			};
		};

		watchdog: watchdog@17c10000 {
			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
			reg = <0 0x17c10000 0 0x1000>;
			clocks = <&sleep_clk>;
			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
			status = "reserved"; /* Owned by Gunyah hyp */
		};

		timer@17c20000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0 0 0x20000000>;
			compatible = "arm,armv7-timer-mem";
			reg = <0 0x17c20000 0 0x1000>;

			frame@17c21000 {
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c21000 0x1000>,
				      <0x17c22000 0x1000>;
			};

			frame@17c23000 {
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c23000 0x1000>;
				status = "disabled";
			};

			frame@17c25000 {
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c25000 0x1000>;
				status = "disabled";
			};

			frame@17c27000 {
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c27000 0x1000>;
				status = "disabled";
			};

			frame@17c29000 {
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c29000 0x1000>;
				status = "disabled";
			};

			frame@17c2b000 {
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c2b000 0x1000>;
				status = "disabled";
			};

			frame@17c2d000 {
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17c2d000 0x1000>;
				status = "disabled";
			};
		};

		apps_rsc: rsc@18200000 {
			compatible = "qcom,rpmh-rsc";
			reg = <0 0x18200000 0 0x10000>,
			      <0 0x18210000 0 0x10000>,
			      <0 0x18220000 0 0x10000>;
			reg-names = "drv-0", "drv-1", "drv-2";
			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
			qcom,tcs-offset = <0xd00>;
			qcom,drv-id = <2>;
			qcom,tcs-config = <ACTIVE_TCS  2>,
					  <SLEEP_TCS   3>,
					  <WAKE_TCS    3>,
					  <CONTROL_TCS 1>;
			power-domains = <&CLUSTER_PD>;

			apps_bcm_voter: bcm-voter {
				compatible = "qcom,bcm-voter";
			};

			rpmhpd: power-controller {
				compatible = "qcom,sc7280-rpmhpd";
				#power-domain-cells = <1>;
				operating-points-v2 = <&rpmhpd_opp_table>;

				rpmhpd_opp_table: opp-table {
					compatible = "operating-points-v2";

					rpmhpd_opp_ret: opp1 {
						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
					};

					rpmhpd_opp_low_svs: opp2 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
					};

					rpmhpd_opp_svs: opp3 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
					};

					rpmhpd_opp_svs_l1: opp4 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
					};

					rpmhpd_opp_svs_l2: opp5 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
					};

					rpmhpd_opp_nom: opp6 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
					};

					rpmhpd_opp_nom_l1: opp7 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
					};

					rpmhpd_opp_turbo: opp8 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
					};

					rpmhpd_opp_turbo_l1: opp9 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
					};
				};
			};

			rpmhcc: clock-controller {
				compatible = "qcom,sc7280-rpmh-clk";
				clocks = <&xo_board>;
				clock-names = "xo";
				#clock-cells = <1>;
			};
		};

		epss_l3: interconnect@18590000 {
			compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3";
			reg = <0 0x18590000 0 0x1000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
			clock-names = "xo", "alternate";
			#interconnect-cells = <1>;
		};

		cpufreq_hw: cpufreq@18591000 {
			compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss";
			reg = <0 0x18591000 0 0x1000>,
			      <0 0x18592000 0 0x1000>,
			      <0 0x18593000 0 0x1000>;

			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dcvsh-irq-0",
					  "dcvsh-irq-1",
					  "dcvsh-irq-2";

			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
			clock-names = "xo", "alternate";
			#freq-domain-cells = <1>;
			#clock-cells = <1>;
		};
	};

	sound: sound {
	};

	thermal_zones: thermal-zones {
		cpu0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 1>;

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu0_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu0_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 2>;

			trips {
				cpu1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu1_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu1_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu2-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 3>;

			trips {
				cpu2_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu2_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu2_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu3-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 4>;

			trips {
				cpu3_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu3_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu3_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu4-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 7>;

			trips {
				cpu4_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu4_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu4_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu4_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu4_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu5-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 8>;

			trips {
				cpu5_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu5_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu5_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu5_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu5_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu6-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 9>;

			trips {
				cpu6_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu6_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu6_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu6_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu6_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu7-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 10>;

			trips {
				cpu7_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu7_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu7_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu7_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu7_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu8-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 11>;

			trips {
				cpu8_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu8_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu8_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu8_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu8_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu9-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 12>;

			trips {
				cpu9_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu9_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu9_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu9_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu9_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu10-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 13>;

			trips {
				cpu10_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu10_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu10_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu10_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu10_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu11-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens0 14>;

			trips {
				cpu11_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu11_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu11_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu11_alert0>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu11_alert1>;
					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		aoss0-thermal {
			polling-delay-passive = <0>;

			thermal-sensors = <&tsens0 0>;

			trips {
				aoss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				aoss0_crit: aoss0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		aoss1-thermal {
			polling-delay-passive = <0>;

			thermal-sensors = <&tsens1 0>;

			trips {
				aoss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				aoss1_crit: aoss1-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpuss0-thermal {
			polling-delay-passive = <0>;

			thermal-sensors = <&tsens0 5>;

			trips {
				cpuss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpuss0_crit: cluster0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpuss1-thermal {
			polling-delay-passive = <0>;

			thermal-sensors = <&tsens0 6>;

			trips {
				cpuss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpuss1_crit: cluster0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		gpuss0-thermal {
			polling-delay-passive = <100>;

			thermal-sensors = <&tsens1 1>;

			trips {
				gpuss0_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss0_crit: gpuss0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&gpuss0_alert0>;
					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		gpuss1-thermal {
			polling-delay-passive = <100>;

			thermal-sensors = <&tsens1 2>;

			trips {
				gpuss1_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss1_crit: gpuss1-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&gpuss1_alert0>;
					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		nspss0-thermal {
			thermal-sensors = <&tsens1 3>;

			trips {
				nspss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				nspss0_crit: nspss0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		nspss1-thermal {
			thermal-sensors = <&tsens1 4>;

			trips {
				nspss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				nspss1_crit: nspss1-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		video-thermal {
			thermal-sensors = <&tsens1 5>;

			trips {
				video_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				video_crit: video-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		ddr-thermal {
			thermal-sensors = <&tsens1 6>;

			trips {
				ddr_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				ddr_crit: ddr-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		mdmss0-thermal {
			thermal-sensors = <&tsens1 7>;

			trips {
				mdmss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				mdmss0_crit: mdmss0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		mdmss1-thermal {
			thermal-sensors = <&tsens1 8>;

			trips {
				mdmss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				mdmss1_crit: mdmss1-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		mdmss2-thermal {
			thermal-sensors = <&tsens1 9>;

			trips {
				mdmss2_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				mdmss2_crit: mdmss2-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		mdmss3-thermal {
			thermal-sensors = <&tsens1 10>;

			trips {
				mdmss3_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				mdmss3_crit: mdmss3-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		camera0-thermal {
			thermal-sensors = <&tsens1 11>;

			trips {
				camera0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				camera0_crit: camera0-crit {
					temperature = <110000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
	};
};