| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2023, Linaro Limited |
| */ |
| |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/clock/qcom,sm8650-camcc.h> |
| #include <dt-bindings/clock/qcom,sm8650-dispcc.h> |
| #include <dt-bindings/clock/qcom,sm8650-gcc.h> |
| #include <dt-bindings/clock/qcom,sm8650-gpucc.h> |
| #include <dt-bindings/clock/qcom,sm8650-tcsr.h> |
| #include <dt-bindings/clock/qcom,sm8650-videocc.h> |
| #include <dt-bindings/dma/qcom-gpi.h> |
| #include <dt-bindings/firmware/qcom,scm.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interconnect/qcom,icc.h> |
| #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mailbox/qcom-ipcc.h> |
| #include <dt-bindings/phy/phy-qcom-qmp.h> |
| #include <dt-bindings/power/qcom,rpmhpd.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/reset/qcom,sm8650-gpucc.h> |
| #include <dt-bindings/soc/qcom,gpr.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| bi_tcxo_div2: bi-tcxo-div2-clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-mult = <1>; |
| clock-div = <2>; |
| }; |
| |
| bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK_A>; |
| clock-mult = <1>; |
| clock-div = <2>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a520"; |
| reg = <0 0>; |
| |
| clocks = <&cpufreq_hw 0>; |
| |
| power-domains = <&CPU_PD0>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| |
| #cooling-cells = <2>; |
| |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| |
| L3_0: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a520"; |
| reg = <0 0x100>; |
| |
| clocks = <&cpufreq_hw 0>; |
| |
| power-domains = <&CPU_PD1>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| |
| #cooling-cells = <2>; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a720"; |
| reg = <0 0x200>; |
| |
| clocks = <&cpufreq_hw 3>; |
| |
| power-domains = <&CPU_PD2>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_200>; |
| capacity-dmips-mhz = <1792>; |
| dynamic-power-coefficient = <238>; |
| |
| qcom,freq-domain = <&cpufreq_hw 3>; |
| |
| #cooling-cells = <2>; |
| |
| L2_200: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a720"; |
| reg = <0 0x300>; |
| |
| clocks = <&cpufreq_hw 3>; |
| |
| power-domains = <&CPU_PD3>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_200>; |
| capacity-dmips-mhz = <1792>; |
| dynamic-power-coefficient = <238>; |
| |
| qcom,freq-domain = <&cpufreq_hw 3>; |
| |
| #cooling-cells = <2>; |
| }; |
| |
| CPU4: cpu@400 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a720"; |
| reg = <0 0x400>; |
| |
| clocks = <&cpufreq_hw 3>; |
| |
| power-domains = <&CPU_PD4>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_400>; |
| capacity-dmips-mhz = <1792>; |
| dynamic-power-coefficient = <238>; |
| |
| qcom,freq-domain = <&cpufreq_hw 3>; |
| |
| #cooling-cells = <2>; |
| |
| L2_400: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU5: cpu@500 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a720"; |
| reg = <0 0x500>; |
| |
| clocks = <&cpufreq_hw 1>; |
| |
| power-domains = <&CPU_PD5>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_500>; |
| capacity-dmips-mhz = <1792>; |
| dynamic-power-coefficient = <238>; |
| |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| |
| #cooling-cells = <2>; |
| |
| L2_500: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU6: cpu@600 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a720"; |
| reg = <0 0x600>; |
| |
| clocks = <&cpufreq_hw 1>; |
| |
| power-domains = <&CPU_PD6>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_600>; |
| capacity-dmips-mhz = <1792>; |
| dynamic-power-coefficient = <238>; |
| |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| |
| #cooling-cells = <2>; |
| |
| L2_600: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU7: cpu@700 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-x4"; |
| reg = <0 0x700>; |
| |
| clocks = <&cpufreq_hw 2>; |
| |
| power-domains = <&CPU_PD7>; |
| power-domain-names = "psci"; |
| |
| enable-method = "psci"; |
| next-level-cache = <&L2_700>; |
| capacity-dmips-mhz = <1894>; |
| dynamic-power-coefficient = <588>; |
| |
| qcom,freq-domain = <&cpufreq_hw 2>; |
| |
| #cooling-cells = <2>; |
| |
| L2_700: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| |
| core4 { |
| cpu = <&CPU4>; |
| }; |
| |
| core5 { |
| cpu = <&CPU5>; |
| }; |
| |
| core6 { |
| cpu = <&CPU6>; |
| }; |
| |
| core7 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| SILVER_CPU_SLEEP_0: cpu-sleep-0-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "silver-rail-power-collapse"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <550>; |
| exit-latency-us = <750>; |
| min-residency-us = <6700>; |
| local-timer-stop; |
| }; |
| |
| GOLD_CPU_SLEEP_0: cpu-sleep-1-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "gold-rail-power-collapse"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <600>; |
| exit-latency-us = <1300>; |
| min-residency-us = <8136>; |
| local-timer-stop; |
| }; |
| |
| GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "gold-plus-rail-power-collapse"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <500>; |
| exit-latency-us = <1350>; |
| min-residency-us = <7480>; |
| local-timer-stop; |
| }; |
| }; |
| |
| domain-idle-states { |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x41000044>; |
| entry-latency-us = <750>; |
| exit-latency-us = <2350>; |
| min-residency-us = <9144>; |
| }; |
| |
| CLUSTER_SLEEP_1: cluster-sleep-1 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x4100c344>; |
| entry-latency-us = <2800>; |
| exit-latency-us = <4400>; |
| min-residency-us = <10150>; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-sm8650", "qcom,scm"; |
| qcom,dload-mode = <&tcsr 0x19000>; |
| interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| }; |
| }; |
| |
| clk_virt: interconnect-0 { |
| compatible = "qcom,sm8650-clk-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mc_virt: interconnect-1 { |
| compatible = "qcom,sm8650-mc-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| memory@a0000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0 0xa0000000 0 0>; |
| }; |
| |
| pmu-a520 { |
| compatible = "arm,cortex-a520-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| pmu-a720 { |
| compatible = "arm,cortex-a720-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| pmu-x4 { |
| compatible = "arm,cortex-x4-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| CPU_PD0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&SILVER_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&SILVER_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&SILVER_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD4: power-domain-cpu4 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD5: power-domain-cpu5 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD6: power-domain-cpu6 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&GOLD_CPU_SLEEP_0>; |
| }; |
| |
| CPU_PD7: power-domain-cpu7 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>; |
| }; |
| |
| CLUSTER_PD: power-domain-cluster { |
| #power-domain-cells = <0>; |
| domain-idle-states = <&CLUSTER_SLEEP_0>, |
| <&CLUSTER_SLEEP_1>; |
| }; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| hyp_mem: hyp@80000000 { |
| reg = <0 0x80000000 0 0xe00000>; |
| no-map; |
| }; |
| |
| cpusys_vm_mem: cpusys-vm@80e00000 { |
| reg = <0 0x80e00000 0 0x400000>; |
| no-map; |
| }; |
| |
| /* Merged xbl_dtlog, xbl_ramdump and aop_image regions */ |
| xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 { |
| reg = <0 0x81a00000 0 0x260000>; |
| no-map; |
| }; |
| |
| aop_cmd_db_mem: aop-cmd-db@81c60000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0 0x81c60000 0 0x20000>; |
| no-map; |
| }; |
| |
| /* Merged aop_config, tme_crash_dump, tme_log, uefi_log, and chipinfo regions */ |
| aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 { |
| reg = <0 0x81c80000 0 0x75000>; |
| no-map; |
| }; |
| |
| /* Secdata region can be reused by apps */ |
| |
| smem: smem@81d00000 { |
| compatible = "qcom,smem"; |
| reg = <0 0x81d00000 0 0x200000>; |
| hwlocks = <&tcsr_mutex 3>; |
| no-map; |
| }; |
| |
| adsp_mhi_mem: adsp-mhi@81f00000 { |
| reg = <0 0x81f00000 0 0x20000>; |
| no-map; |
| }; |
| |
| pvmfw_mem: pvmfw@824a0000 { |
| reg = <0 0x824a0000 0 0x100000>; |
| no-map; |
| }; |
| |
| global_sync_mem: global-sync@82600000 { |
| reg = <0 0x82600000 0 0x100000>; |
| no-map; |
| }; |
| |
| tz_stat_mem: tz-stat@82700000 { |
| reg = <0 0x82700000 0 0x100000>; |
| no-map; |
| }; |
| |
| qdss_mem: qdss@82800000 { |
| reg = <0 0x82800000 0 0x2000000>; |
| no-map; |
| }; |
| |
| qlink_logging_mem: qlink-logging@84800000 { |
| reg = <0 0x84800000 0 0x200000>; |
| no-map; |
| }; |
| |
| mpss_dsm_mem: mpss-dsm@86b00000 { |
| reg = <0 0x86b00000 0 0x4900000>; |
| no-map; |
| }; |
| |
| mpss_dsm_mem_2: mpss-dsm-2@8b400000 { |
| reg = <0 0x8b400000 0 0x800000>; |
| no-map; |
| }; |
| |
| mpss_mem: mpss@8bc00000 { |
| reg = <0 0x8bc00000 0 0xf400000>; |
| no-map; |
| }; |
| |
| q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 { |
| reg = <0 0x9b000000 0 0x80000>; |
| no-map; |
| }; |
| |
| ipa_fw_mem: ipa-fw@9b080000 { |
| reg = <0 0x9b080000 0 0x10000>; |
| no-map; |
| }; |
| |
| ipa_gsi_mem: ipa-gsi@9b090000 { |
| reg = <0 0x9b090000 0 0xa000>; |
| no-map; |
| }; |
| |
| gpu_micro_code_mem: gpu-micro-code@9b09a000 { |
| reg = <0 0x9b09a000 0 0x2000>; |
| no-map; |
| }; |
| |
| spss_region_mem: spss@9b0a0000 { |
| reg = <0 0x9b0a0000 0 0x1e0000>; |
| no-map; |
| }; |
| |
| /* First part of the "SPU secure shared memory" region */ |
| spu_tz_shared_mem: spu-tz-shared@9b280000 { |
| reg = <0 0x9b280000 0 0x60000>; |
| no-map; |
| }; |
| |
| /* Second part of the "SPU secure shared memory" region */ |
| spu_modem_shared_mem: spu-modem-shared@9b2e0000 { |
| reg = <0 0x9b2e0000 0 0x20000>; |
| no-map; |
| }; |
| |
| camera_mem: camera@9b300000 { |
| reg = <0 0x9b300000 0 0x800000>; |
| no-map; |
| }; |
| |
| video_mem: video@9bb00000 { |
| reg = <0 0x9bb00000 0 0x800000>; |
| no-map; |
| }; |
| |
| cvp_mem: cvp@9c300000 { |
| reg = <0 0x9c300000 0 0x700000>; |
| no-map; |
| }; |
| |
| cdsp_mem: cdsp@9ca00000 { |
| reg = <0 0x9ca00000 0 0x1400000>; |
| no-map; |
| }; |
| |
| q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 { |
| reg = <0 0x9de00000 0 0x80000>; |
| no-map; |
| }; |
| |
| q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 { |
| reg = <0 0x9de80000 0 0x80000>; |
| no-map; |
| }; |
| |
| adspslpi_mem: adspslpi@9df00000 { |
| reg = <0 0x9df00000 0 0x4080000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: rmtfs@d7c00000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0 0xd7c00000 0 0x400000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| }; |
| |
| /* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */ |
| tz_merged_mem: tz-merged@d8000000 { |
| reg = <0 0xd8000000 0 0x800000>; |
| no-map; |
| }; |
| |
| hwfence_shbuf: hwfence-shbuf@e6440000 { |
| reg = <0 0xe6440000 0 0x2dd000>; |
| no-map; |
| }; |
| |
| trust_ui_vm_mem: trust-ui-vm@f3800000 { |
| reg = <0 0xf3800000 0 0x4400000>; |
| no-map; |
| }; |
| |
| oem_vm_mem: oem-vm@f7c00000 { |
| reg = <0 0xf7c00000 0 0x4c00000>; |
| no-map; |
| }; |
| |
| llcc_lpi_mem: llcc-lpi@ff800000 { |
| reg = <0 0xff800000 0 0x600000>; |
| no-map; |
| }; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,smem = <443>, <429>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| smp2p_adsp_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_adsp_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-cdsp { |
| compatible = "qcom,smp2p"; |
| |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,smem = <94>, <432>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <5>; |
| |
| smp2p_cdsp_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_cdsp_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-modem { |
| compatible = "qcom,smp2p"; |
| |
| interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,smem = <435>, <428>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| smp2p_modem_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_modem_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| ipa_smp2p_out: ipa-ap-to-modem { |
| qcom,entry-name = "ipa"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| ipa_smp2p_in: ipa-modem-to-ap { |
| qcom,entry-name = "ipa"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| dma-ranges = <0 0 0 0 0x10 0>; |
| ranges = <0 0 0 0 0x10 0>; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,sm8650-gcc"; |
| reg = <0 0x00100000 0 0x1f4200>; |
| |
| clocks = <&bi_tcxo_div2>, |
| <&bi_tcxo_ao_div2>, |
| <&sleep_clk>, |
| <&pcie0_phy>, |
| <&pcie1_phy QMP_PCIE_PIPE_CLK>, |
| <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, |
| <&ufs_mem_phy 0>, |
| <&ufs_mem_phy 1>, |
| <&ufs_mem_phy 2>, |
| <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; |
| |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| ipcc: mailbox@406000 { |
| compatible = "qcom,sm8650-ipcc", "qcom,ipcc"; |
| reg = <0 0x00406000 0 0x1000>; |
| |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| #mbox-cells = <2>; |
| }; |
| |
| gpi_dma2: dma-controller@800000 { |
| compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0 0x00800000 0 0x60000>; |
| |
| interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dma-channels = <12>; |
| dma-channel-mask = <0x3f>; |
| #dma-cells = <3>; |
| |
| iommus = <&apps_smmu 0x436 0>; |
| |
| dma-coherent; |
| |
| status = "disabled"; |
| }; |
| |
| qupv3_id_1: geniqup@8c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x008c0000 0 0x2000>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; |
| clock-names = "m-ahb", |
| "s-ahb"; |
| |
| iommus = <&apps_smmu 0x423 0>; |
| |
| dma-coherent; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| i2c8: i2c@880000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00880000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c8_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi8: spi@880000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00880000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@884000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00884000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c9_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi9: spi@884000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00884000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@888000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00888000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c10_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi10: spi@888000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00888000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@88c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0088c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c11_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi11: spi@88c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0088c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@890000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00890000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c12_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi12: spi@890000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00890000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@894000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00894000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c13_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi13: spi@894000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00894000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart14: serial@898000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00898000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; |
| pinctrl-names = "default"; |
| |
| status = "disabled"; |
| }; |
| |
| uart15: serial@89c000 { |
| compatible = "qcom,geni-debug-uart"; |
| reg = <0 0x0089c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&qup_uart15_default>; |
| pinctrl-names = "default"; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| i2c_master_hub_0: geniqup@9c0000 { |
| compatible = "qcom,geni-se-i2c-master-hub"; |
| reg = <0 0x009c0000 0 0x2000>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; |
| clock-names = "s-ahb"; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| i2c_hub_0: i2c@980000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x00980000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c0_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_1: i2c@984000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x00984000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c1_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_2: i2c@988000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x00988000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c2_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_3: i2c@98c000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x0098c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c3_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_4: i2c@990000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x00990000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c4_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_5: i2c@994000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x00994000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c5_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_6: i2c@998000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x00998000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c6_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_7: i2c@99c000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x0099c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c7_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_8: i2c@9a0000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x009a0000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c8_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c_hub_9: i2c@9a4000 { |
| compatible = "qcom,geni-i2c-master-hub"; |
| reg = <0 0x009a4000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, |
| <&gcc GCC_QUPV3_I2C_CORE_CLK>; |
| clock-names = "se", |
| "core"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| |
| pinctrl-0 = <&hub_i2c9_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| gpi_dma1: dma-controller@a00000 { |
| compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0 0x00a00000 0 0x60000>; |
| |
| interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dma-channels = <12>; |
| dma-channel-mask = <0xc>; |
| #dma-cells = <3>; |
| |
| iommus = <&apps_smmu 0xb6 0>; |
| dma-coherent; |
| |
| status = "disabled"; |
| }; |
| |
| qupv3_id_0: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x00ac0000 0 0x2000>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| clock-names = "m-ahb", |
| "s-ahb"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core"; |
| |
| iommus = <&apps_smmu 0xa3 0>; |
| |
| dma-coherent; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| i2c0: i2c@a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a80000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c0_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi0: spi@a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a80000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a84000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c1_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi1: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a84000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a88000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c2_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi2: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a88000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c3_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi3: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a90000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c4_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi4: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a90000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a94000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c5_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi5: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a94000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a98000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c6_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi6: spi@a98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a98000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@a9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_i2c7_data_clk>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi7: spi@a9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| |
| interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| |
| dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| |
| pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| cnoc_main: interconnect@1500000 { |
| compatible = "qcom,sm8650-cnoc-main"; |
| reg = <0 0x01500000 0 0x14080>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| config_noc: interconnect@1600000 { |
| compatible = "qcom,sm8650-config-noc"; |
| reg = <0 0x01600000 0 0x6200>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| system_noc: interconnect@1680000 { |
| compatible = "qcom,sm8650-system-noc"; |
| reg = <0 0x01680000 0 0x1d080>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| pcie_noc: interconnect@16c0000 { |
| compatible = "qcom,sm8650-pcie-anoc"; |
| reg = <0 0x016c0000 0 0x12200>; |
| |
| clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, |
| <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| aggre1_noc: interconnect@16e0000 { |
| compatible = "qcom,sm8650-aggre1-noc"; |
| reg = <0 0x016e0000 0 0x16400>; |
| |
| clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| aggre2_noc: interconnect@1700000 { |
| compatible = "qcom,sm8650-aggre2-noc"; |
| reg = <0 0x01700000 0 0x1e400>; |
| |
| clocks = <&rpmhcc RPMH_IPA_CLK>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| mmss_noc: interconnect@1780000 { |
| compatible = "qcom,sm8650-mmss-noc"; |
| reg = <0 0x01780000 0 0x5b800>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| rng: rng@10c3000 { |
| compatible = "qcom,sm8650-trng", "qcom,trng"; |
| reg = <0 0x010c3000 0 0x1000>; |
| }; |
| |
| pcie0: pcie@1c00000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; |
| reg = <0 0x01c00000 0 0x3000>, |
| <0 0x60000000 0 0xf1d>, |
| <0 0x60000f20 0 0xa8>, |
| <0 0x60001000 0 0x1000>, |
| <0 0x60100000 0 0x100000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config"; |
| |
| interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7"; |
| |
| clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, |
| <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr", |
| "cnoc_sf_axi"; |
| |
| resets = <&gcc GCC_PCIE_0_BCR>; |
| reset-names = "pci"; |
| |
| interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "pcie-mem", |
| "cpu-pcie"; |
| |
| power-domains = <&gcc PCIE_0_GDSC>; |
| |
| iommu-map = <0 &apps_smmu 0x1400 0x1>, |
| <0x100 &apps_smmu 0x1401 0x1>; |
| |
| interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| #interrupt-cells = <1>; |
| |
| msi-map = <0x0 &gic_its 0x1400 0x1>, |
| <0x100 &gic_its 0x1401 0x1>; |
| msi-map-mask = <0xff00>; |
| |
| linux,pci-domain = <0>; |
| num-lanes = <2>; |
| bus-range = <0 0xff>; |
| |
| phys = <&pcie0_phy>; |
| phy-names = "pciephy"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>, |
| <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>; |
| |
| dma-coherent; |
| |
| status = "disabled"; |
| |
| pcieport0: pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie0_phy: phy@1c06000 { |
| compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy"; |
| reg = <0 0x01c06000 0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&tcsr TCSR_PCIE_0_CLKREF_EN>, |
| <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_0_PIPE_CLK>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref", |
| "rchng", |
| "pipe"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| resets = <&gcc GCC_PCIE_0_PHY_BCR>; |
| reset-names = "phy"; |
| |
| power-domains = <&gcc PCIE_0_PHY_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie0_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@1c08000 { |
| device_type = "pci"; |
| compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; |
| reg = <0 0x01c08000 0 0x3000>, |
| <0 0x40000000 0 0xf1d>, |
| <0 0x40000f20 0 0xa8>, |
| <0 0x40001000 0 0x1000>, |
| <0 0x40100000 0 0x100000>; |
| reg-names = "parf", |
| "dbi", |
| "elbi", |
| "atu", |
| "config"; |
| |
| interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7"; |
| |
| clocks = <&gcc GCC_PCIE_1_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, |
| <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "ddrss_sf_tbu", |
| "noc_aggr", |
| "cnoc_sf_axi"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| resets = <&gcc GCC_PCIE_1_BCR>, |
| <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; |
| reset-names = "pci", |
| "link_down"; |
| |
| interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "pcie-mem", |
| "cpu-pcie"; |
| |
| power-domains = <&gcc PCIE_1_GDSC>; |
| |
| iommu-map = <0 &apps_smmu 0x1480 0x1>, |
| <0x100 &apps_smmu 0x1481 0x1>; |
| |
| interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| #interrupt-cells = <1>; |
| |
| msi-map = <0x0 &gic_its 0x1480 0x1>, |
| <0x100 &gic_its 0x1481 0x1>; |
| msi-map-mask = <0xff00>; |
| |
| linux,pci-domain = <1>; |
| num-lanes = <2>; |
| bus-range = <0 0xff>; |
| |
| phys = <&pcie1_phy>; |
| phy-names = "pciephy"; |
| |
| dma-coherent; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>, |
| <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; |
| |
| status = "disabled"; |
| |
| pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie1_phy: phy@1c0e000 { |
| compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy"; |
| reg = <0 0x01c0e000 0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&tcsr TCSR_PCIE_1_CLKREF_EN>, |
| <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_1_PIPE_CLK>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref", |
| "rchng", |
| "pipe"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| resets = <&gcc GCC_PCIE_1_PHY_BCR>, |
| <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; |
| reset-names = "phy", |
| "phy_nocsr"; |
| |
| power-domains = <&gcc PCIE_1_PHY_GDSC>; |
| |
| #clock-cells = <1>; |
| clock-output-names = "pcie1_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| cryptobam: dma-controller@1dc4000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0 0x01dc4000 0 0x28000>; |
| |
| interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #dma-cells = <1>; |
| |
| iommus = <&apps_smmu 0x480 0>, |
| <&apps_smmu 0x481 0>; |
| |
| qcom,ee = <0>; |
| qcom,controlled-remotely; |
| }; |
| |
| crypto: crypto@1dfa000 { |
| compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce"; |
| reg = <0 0x01dfa000 0 0x6000>; |
| |
| interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "memory"; |
| |
| dmas = <&cryptobam 4>, <&cryptobam 5>; |
| dma-names = "rx", "tx"; |
| |
| iommus = <&apps_smmu 0x480 0>, |
| <&apps_smmu 0x481 0>; |
| }; |
| |
| ufs_mem_phy: phy@1d80000 { |
| compatible = "qcom,sm8650-qmp-ufs-phy"; |
| reg = <0 0x01d80000 0 0x2000>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, |
| <&tcsr TCSR_UFS_CLKREF_EN>; |
| clock-names = "ref", |
| "ref_aux", |
| "qref"; |
| |
| resets = <&ufs_mem_hc 0>; |
| reset-names = "ufsphy"; |
| |
| power-domains = <&gcc UFS_MEM_PHY_GDSC>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| ufs_mem_hc: ufs@1d84000 { |
| compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; |
| reg = <0 0x01d84000 0 0x3000>; |
| |
| interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| <&gcc GCC_UFS_PHY_AHB_CLK>, |
| <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| <&tcsr TCSR_UFS_PAD_CLKREF_EN>, |
| <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; |
| clock-names = "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "ref_clk", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk", |
| "rx_lane1_sync_clk"; |
| freq-table-hz = <100000000 403000000>, |
| <0 0>, |
| <0 0>, |
| <100000000 403000000>, |
| <100000000 403000000>, |
| <0 0>, |
| <0 0>, |
| <0 0>; |
| |
| resets = <&gcc GCC_UFS_PHY_BCR>; |
| reset-names = "rst"; |
| |
| interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "ufs-ddr", |
| "cpu-ufs"; |
| |
| power-domains = <&gcc UFS_PHY_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| iommus = <&apps_smmu 0x60 0>; |
| |
| lanes-per-direction = <2>; |
| qcom,ice = <&ice>; |
| |
| phys = <&ufs_mem_phy>; |
| phy-names = "ufsphy"; |
| |
| #reset-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| ice: crypto@1d88000 { |
| compatible = "qcom,sm8650-inline-crypto-engine", |
| "qcom,inline-crypto-engine"; |
| reg = <0 0x01d88000 0 0x8000>; |
| |
| clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0 0x01f40000 0 0x20000>; |
| |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: clock-controller@1fc0000 { |
| compatible = "qcom,sm8650-tcsr", "syscon"; |
| reg = <0 0x01fc0000 0 0xa0000>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| gpu: gpu@3d00000 { |
| compatible = "qcom,adreno-43051401", "qcom,adreno"; |
| reg = <0x0 0x03d00000 0x0 0x40000>, |
| <0x0 0x03d9e000 0x0 0x2000>, |
| <0x0 0x03d61000 0x0 0x800>; |
| reg-names = "kgsl_3d0_reg_memory", |
| "cx_mem", |
| "cx_dbgc"; |
| |
| interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| |
| iommus = <&adreno_smmu 0 0x0>, |
| <&adreno_smmu 1 0x0>; |
| |
| operating-points-v2 = <&gpu_opp_table>; |
| |
| qcom,gmu = <&gmu>; |
| #cooling-cells = <2>; |
| |
| status = "disabled"; |
| |
| zap-shader { |
| memory-region = <&gpu_micro_code_mem>; |
| }; |
| |
| /* Speedbin needs more work on A740+, keep only lower freqs */ |
| gpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-231000000 { |
| opp-hz = /bits/ 64 <231000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; |
| }; |
| |
| opp-310000000 { |
| opp-hz = /bits/ 64 <310000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; |
| }; |
| |
| opp-366000000 { |
| opp-hz = /bits/ 64 <366000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; |
| }; |
| |
| opp-422000000 { |
| opp-hz = /bits/ 64 <422000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| opp-500000000 { |
| opp-hz = /bits/ 64 <500000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; |
| }; |
| |
| opp-578000000 { |
| opp-hz = /bits/ 64 <578000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| opp-629000000 { |
| opp-hz = /bits/ 64 <629000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; |
| }; |
| |
| opp-680000000 { |
| opp-hz = /bits/ 64 <680000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| opp-720000000 { |
| opp-hz = /bits/ 64 <720000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| }; |
| |
| opp-770000000 { |
| opp-hz = /bits/ 64 <770000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| opp-834000000 { |
| opp-hz = /bits/ 64 <834000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| }; |
| }; |
| |
| gmu: gmu@3d6a000 { |
| compatible = "qcom,adreno-gmu-750.1", "qcom,adreno-gmu"; |
| reg = <0x0 0x03d6a000 0x0 0x35000>, |
| <0x0 0x03d50000 0x0 0x10000>, |
| <0x0 0x0b280000 0x0 0x10000>; |
| reg-names = "gmu", "rscc", "gmu_pdc"; |
| |
| interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hfi", "gmu"; |
| |
| clocks = <&gpucc GPU_CC_AHB_CLK>, |
| <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_CXO_CLK>, |
| <&gcc GCC_DDRSS_GPU_AXI_CLK>, |
| <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| <&gpucc GPU_CC_DEMET_CLK>; |
| clock-names = "ahb", |
| "gmu", |
| "cxo", |
| "axi", |
| "memnoc", |
| "hub", |
| "demet"; |
| |
| power-domains = <&gpucc GPU_CX_GDSC>, |
| <&gpucc GPU_GX_GDSC>; |
| power-domain-names = "cx", |
| "gx"; |
| |
| iommus = <&adreno_smmu 5 0x0>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| operating-points-v2 = <&gmu_opp_table>; |
| |
| gmu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-260000000 { |
| opp-hz = /bits/ 64 <260000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| opp-625000000 { |
| opp-hz = /bits/ 64 <625000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| }; |
| }; |
| |
| gpucc: clock-controller@3d90000 { |
| compatible = "qcom,sm8650-gpucc"; |
| reg = <0 0x03d90000 0 0xa000>; |
| |
| clocks = <&bi_tcxo_div2>, |
| <&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| adreno_smmu: iommu@3da0000 { |
| compatible = "qcom,sm8650-smmu-500", "qcom,adreno-smmu", |
| "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x03da0000 0x0 0x40000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <1>; |
| interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, |
| <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>; |
| clock-names = "hlos", |
| "bus", |
| "iface", |
| "ahb"; |
| power-domains = <&gpucc GPU_CX_GDSC>; |
| dma-coherent; |
| }; |
| |
| ipa: ipa@3f40000 { |
| compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa"; |
| |
| iommus = <&apps_smmu 0x4a0 0x0>, |
| <&apps_smmu 0x4a2 0x0>; |
| reg = <0 0x3f40000 0 0x10000>, |
| <0 0x3f50000 0 0x5000>, |
| <0 0x3e04000 0 0xfc000>; |
| reg-names = "ipa-reg", |
| "ipa-shared", |
| "gsi"; |
| |
| interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, |
| <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, |
| <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ipa", |
| "gsi", |
| "ipa-clock-query", |
| "ipa-setup-ready"; |
| |
| clocks = <&rpmhcc RPMH_IPA_CLK>; |
| clock-names = "core"; |
| |
| interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; |
| interconnect-names = "memory", |
| "config"; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&ipa_smp2p_out 0>, |
| <&ipa_smp2p_out 1>; |
| qcom,smem-state-names = "ipa-clock-enabled-valid", |
| "ipa-clock-enabled"; |
| |
| status = "disabled"; |
| }; |
| |
| remoteproc_mpss: remoteproc@4080000 { |
| compatible = "qcom,sm8650-mpss-pas"; |
| reg = <0 0x04080000 0 0x4040>; |
| |
| interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack", |
| "shutdown-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>, |
| <&rpmhpd RPMHPD_MSS>; |
| power-domain-names = "cx", |
| "mss"; |
| |
| memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, |
| <&mpss_dsm_mem>, <&mpss_dsm_mem_2>, |
| <&qlink_logging_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_modem_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| qcom,remote-pid = <1>; |
| |
| label = "mpss"; |
| }; |
| }; |
| |
| lpass_wsa2macro: codec@6aa0000 { |
| compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; |
| reg = <0 0x06aa0000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&lpass_vamacro>; |
| clock-names = "mclk", |
| "macro", |
| "dcodec", |
| "fsgen"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "wsa2-mclk"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| swr3: soundwire@6ab0000 { |
| compatible = "qcom,soundwire-v2.0.0"; |
| reg = <0 0x06ab0000 0 0x10000>; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lpass_wsa2macro>; |
| clock-names = "iface"; |
| label = "WSA2"; |
| |
| pinctrl-0 = <&wsa2_swr_active>; |
| pinctrl-names = "default"; |
| |
| qcom,din-ports = <4>; |
| qcom,dout-ports = <9>; |
| |
| qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; |
| qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; |
| qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; |
| qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| |
| #address-cells = <2>; |
| #size-cells = <0>; |
| #sound-dai-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| lpass_rxmacro: codec@6ac0000 { |
| compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; |
| reg = <0 0x06ac0000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&lpass_vamacro>; |
| clock-names = "mclk", |
| "macro", |
| "dcodec", |
| "fsgen"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "mclk"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| swr1: soundwire@6ad0000 { |
| compatible = "qcom,soundwire-v2.0.0"; |
| reg = <0 0x06ad0000 0 0x10000>; |
| interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lpass_rxmacro>; |
| clock-names = "iface"; |
| label = "RX"; |
| |
| pinctrl-0 = <&rx_swr_active>; |
| pinctrl-names = "default"; |
| |
| qcom,din-ports = <0>; |
| qcom,dout-ports = <11>; |
| |
| qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>; |
| qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>; |
| qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>; |
| qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; |
| |
| #address-cells = <2>; |
| #size-cells = <0>; |
| #sound-dai-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| lpass_txmacro: codec@6ae0000 { |
| compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; |
| reg = <0 0x06ae0000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&lpass_vamacro>; |
| clock-names = "mclk", |
| "macro", |
| "dcodec", |
| "fsgen"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "mclk"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| lpass_wsamacro: codec@6b00000 { |
| compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; |
| reg = <0 0x06b00000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&lpass_vamacro>; |
| clock-names = "mclk", |
| "macro", |
| "dcodec", |
| "fsgen"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "mclk"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| swr0: soundwire@6b10000 { |
| compatible = "qcom,soundwire-v2.0.0"; |
| reg = <0 0x06b10000 0 0x10000>; |
| interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lpass_wsamacro>; |
| clock-names = "iface"; |
| label = "WSA"; |
| |
| pinctrl-0 = <&wsa_swr_active>; |
| pinctrl-names = "default"; |
| |
| qcom,din-ports = <4>; |
| qcom,dout-ports = <9>; |
| |
| qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; |
| qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; |
| qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; |
| qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| |
| #address-cells = <2>; |
| #size-cells = <0>; |
| #sound-dai-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| swr2: soundwire@6d30000 { |
| compatible = "qcom,soundwire-v2.0.0"; |
| reg = <0 0x06d30000 0 0x10000>; |
| interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "core", "wakeup"; |
| clocks = <&lpass_txmacro>; |
| clock-names = "iface"; |
| label = "TX"; |
| |
| pinctrl-0 = <&tx_swr_active>; |
| pinctrl-names = "default"; |
| |
| qcom,din-ports = <4>; |
| qcom,dout-ports = <0>; |
| |
| qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; |
| qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; |
| qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; |
| |
| #address-cells = <2>; |
| #size-cells = <0>; |
| #sound-dai-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| lpass_vamacro: codec@6d44000 { |
| compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; |
| reg = <0 0x06d44000 0 0x1000>; |
| clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| clock-names = "mclk", |
| "macro", |
| "dcodec"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "fsgen"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| lpass_tlmm: pinctrl@6e80000 { |
| compatible = "qcom,sm8650-lpass-lpi-pinctrl"; |
| reg = <0 0x06e80000 0 0x20000>; |
| |
| clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| clock-names = "core", "audio"; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&lpass_tlmm 0 0 23>; |
| |
| tx_swr_active: tx-swr-active-state { |
| clk-pins { |
| pins = "gpio0"; |
| function = "swr_tx_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio1", "gpio2", "gpio14"; |
| function = "swr_tx_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| rx_swr_active: rx-swr-active-state { |
| clk-pins { |
| pins = "gpio3"; |
| function = "swr_rx_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio4", "gpio5"; |
| function = "swr_rx_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| dmic01_default: dmic01-default-state { |
| clk-pins { |
| pins = "gpio6"; |
| function = "dmic1_clk"; |
| drive-strength = <8>; |
| output-high; |
| }; |
| |
| data-pins { |
| pins = "gpio7"; |
| function = "dmic1_data"; |
| drive-strength = <8>; |
| input-enable; |
| }; |
| }; |
| |
| dmic23_default: dmic23-default-state { |
| clk-pins { |
| pins = "gpio8"; |
| function = "dmic2_clk"; |
| drive-strength = <8>; |
| output-high; |
| }; |
| |
| data-pins { |
| pins = "gpio9"; |
| function = "dmic2_data"; |
| drive-strength = <8>; |
| input-enable; |
| }; |
| }; |
| |
| wsa_swr_active: wsa-swr-active-state { |
| clk-pins { |
| pins = "gpio10"; |
| function = "wsa_swr_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio11"; |
| function = "wsa_swr_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| wsa2_swr_active: wsa2-swr-active-state { |
| clk-pins { |
| pins = "gpio15"; |
| function = "wsa2_swr_clk"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio16"; |
| function = "wsa2_swr_data"; |
| drive-strength = <2>; |
| slew-rate = <1>; |
| bias-bus-hold; |
| }; |
| }; |
| }; |
| |
| lpass_lpiaon_noc: interconnect@7400000 { |
| compatible = "qcom,sm8650-lpass-lpiaon-noc"; |
| reg = <0 0x07400000 0 0x19080>; |
| |
| #interconnect-cells = <2>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| lpass_lpicx_noc: interconnect@7430000 { |
| compatible = "qcom,sm8650-lpass-lpicx-noc"; |
| reg = <0 0x07430000 0 0x3a200>; |
| |
| #interconnect-cells = <2>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| lpass_ag_noc: interconnect@7e40000 { |
| compatible = "qcom,sm8650-lpass-ag-noc"; |
| reg = <0 0x07e40000 0 0xe080>; |
| |
| #interconnect-cells = <2>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| sdhc_2: mmc@8804000 { |
| compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0 0x08804000 0 0x1000>; |
| |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", |
| "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", |
| "core", |
| "xo"; |
| |
| interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "sdhc-ddr", |
| "cpu-sdhc"; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>; |
| operating-points-v2 = <&sdhc2_opp_table>; |
| |
| iommus = <&apps_smmu 0x540 0>; |
| |
| bus-width = <4>; |
| |
| /* Forbid SDR104/SDR50 - broken hw! */ |
| sdhci-caps-mask = <0x3 0>; |
| |
| qcom,dll-config = <0x0007642c>; |
| qcom,ddr-config = <0x80040868>; |
| |
| dma-coherent; |
| |
| status = "disabled"; |
| |
| sdhc2_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-19200000 { |
| opp-hz = /bits/ 64 <19200000>; |
| required-opps = <&rpmhpd_opp_min_svs>; |
| }; |
| |
| opp-50000000 { |
| opp-hz = /bits/ 64 <50000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-202000000 { |
| opp-hz = /bits/ 64 <202000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| }; |
| }; |
| |
| videocc: clock-controller@aaf0000 { |
| compatible = "qcom,sm8650-videocc"; |
| reg = <0 0x0aaf0000 0 0x10000>; |
| clocks = <&bi_tcxo_div2>, |
| <&gcc GCC_VIDEO_AHB_CLK>; |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| cci0: cci@ac15000 { |
| compatible = "qcom,sm8650-cci", "qcom,msm8996-cci"; |
| reg = <0 0x0ac15000 0 0x1000>; |
| interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>; |
| power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; |
| clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, |
| <&camcc CAM_CC_CPAS_AHB_CLK>, |
| <&camcc CAM_CC_CCI_0_CLK>; |
| clock-names = "camnoc_axi", |
| "cpas_ahb", |
| "cci"; |
| pinctrl-0 = <&cci0_0_default &cci0_1_default>; |
| pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cci0_i2c0: i2c-bus@0 { |
| reg = <0>; |
| clock-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cci0_i2c1: i2c-bus@1 { |
| reg = <1>; |
| clock-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| cci1: cci@ac16000 { |
| compatible = "qcom,sm8650-cci", "qcom,msm8996-cci"; |
| reg = <0 0x0ac16000 0 0x1000>; |
| interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>; |
| power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; |
| clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, |
| <&camcc CAM_CC_CPAS_AHB_CLK>, |
| <&camcc CAM_CC_CCI_1_CLK>; |
| clock-names = "camnoc_axi", |
| "cpas_ahb", |
| "cci"; |
| pinctrl-0 = <&cci1_0_default &cci1_1_default>; |
| pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cci1_i2c0: i2c-bus@0 { |
| reg = <0>; |
| clock-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cci1_i2c1: i2c-bus@1 { |
| reg = <1>; |
| clock-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| cci2: cci@ac17000 { |
| compatible = "qcom,sm8650-cci", "qcom,msm8996-cci"; |
| reg = <0 0x0ac17000 0 0x1000>; |
| interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>; |
| power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; |
| clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, |
| <&camcc CAM_CC_CPAS_AHB_CLK>, |
| <&camcc CAM_CC_CCI_2_CLK>; |
| clock-names = "camnoc_axi", |
| "cpas_ahb", |
| "cci"; |
| pinctrl-0 = <&cci2_0_default &cci2_1_default>; |
| pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cci2_i2c0: i2c-bus@0 { |
| reg = <0>; |
| clock-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cci2_i2c1: i2c-bus@1 { |
| reg = <1>; |
| clock-frequency = <1000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| camcc: clock-controller@ade0000 { |
| compatible = "qcom,sm8650-camcc"; |
| reg = <0 0x0ade0000 0 0x20000>; |
| clocks = <&gcc GCC_CAMERA_AHB_CLK>, |
| <&bi_tcxo_div2>, |
| <&bi_tcxo_ao_div2>, |
| <&sleep_clk>; |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| mdss: display-subsystem@ae00000 { |
| compatible = "qcom,sm8650-mdss"; |
| reg = <0 0x0ae00000 0 0x1000>; |
| reg-names = "mdss"; |
| |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>; |
| |
| resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; |
| |
| interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS |
| &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, |
| <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "mdp0-mem", |
| "mdp1-mem"; |
| |
| power-domains = <&dispcc MDSS_GDSC>; |
| |
| iommus = <&apps_smmu 0x1c00 0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdss_mdp: display-controller@ae01000 { |
| compatible = "qcom,sm8650-dpu"; |
| reg = <0 0x0ae01000 0 0x8f000>, |
| <0 0x0aeb0000 0 0x2008>; |
| reg-names = "mdp", |
| "vbif"; |
| |
| interrupts-extended = <&mdss 0>; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "nrt_bus", |
| "iface", |
| "lut", |
| "core", |
| "vsync"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| operating-points-v2 = <&mdp_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| dpu_intf1_out: endpoint { |
| remote-endpoint = <&mdss_dsi0_in>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| dpu_intf2_out: endpoint { |
| remote-endpoint = <&mdss_dsi1_in>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| dpu_intf0_out: endpoint { |
| remote-endpoint = <&mdss_dp0_in>; |
| }; |
| }; |
| }; |
| |
| mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-325000000 { |
| opp-hz = /bits/ 64 <325000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-375000000 { |
| opp-hz = /bits/ 64 <375000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-514000000 { |
| opp-hz = /bits/ 64 <514000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi0: dsi@ae94000 { |
| compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| reg = <0 0x0ae94000 0 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupts-extended = <&mdss 4>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi0_phy 0>, |
| <&mdss_dsi0_phy 1>; |
| |
| operating-points-v2 = <&mdss_dsi_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&mdss_dsi0_phy>; |
| phy-names = "dsi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dsi0_in: endpoint { |
| remote-endpoint = <&dpu_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| |
| mdss_dsi_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-187500000 { |
| opp-hz = /bits/ 64 <187500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-358000000 { |
| opp-hz = /bits/ 64 <358000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi0_phy: phy@ae95000 { |
| compatible = "qcom,sm8650-dsi-phy-4nm"; |
| reg = <0 0x0ae95000 0 0x200>, |
| <0 0x0ae95200 0 0x280>, |
| <0 0x0ae95500 0 0x400>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", |
| "ref"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss_dsi1: dsi@ae96000 { |
| compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| reg = <0 0x0ae96000 0 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupts-extended = <&mdss 5>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK1_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC1_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi1_phy 0>, |
| <&mdss_dsi1_phy 1>; |
| |
| operating-points-v2 = <&mdss_dsi_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&mdss_dsi1_phy>; |
| phy-names = "dsi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dsi1_in: endpoint { |
| remote-endpoint = <&dpu_intf2_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dsi1_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dsi1_phy: phy@ae97000 { |
| compatible = "qcom,sm8650-dsi-phy-4nm"; |
| reg = <0 0x0ae97000 0 0x200>, |
| <0 0x0ae97200 0 0x280>, |
| <0 0x0ae97500 0 0x400>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", |
| "ref"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss_dp0: displayport-controller@af54000 { |
| compatible = "qcom,sm8650-dp"; |
| reg = <0 0xaf54000 0 0x104>, |
| <0 0xaf54200 0 0xc0>, |
| <0 0xaf55000 0 0x770>, |
| <0 0xaf56000 0 0x9c>, |
| <0 0xaf57000 0 0x9c>; |
| |
| interrupts-extended = <&mdss 12>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| |
| operating-points-v2 = <&dp_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| dp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-162000000 { |
| opp-hz = /bits/ 64 <162000000>; |
| required-opps = <&rpmhpd_opp_low_svs_d1>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dp0_in: endpoint { |
| remote-endpoint = <&dpu_intf0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dp0_out: endpoint { |
| remote-endpoint = <&usb_dp_qmpphy_dp_in>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| dispcc: clock-controller@af00000 { |
| compatible = "qcom,sm8650-dispcc"; |
| reg = <0 0x0af00000 0 0x20000>; |
| |
| clocks = <&bi_tcxo_div2>, |
| <&bi_tcxo_ao_div2>, |
| <&gcc GCC_DISP_AHB_CLK>, |
| <&sleep_clk>, |
| <&mdss_dsi0_phy 0>, |
| <&mdss_dsi0_phy 1>, |
| <&mdss_dsi1_phy 0>, |
| <&mdss_dsi1_phy 1>, |
| <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <0>, /* dp1 */ |
| <0>, |
| <0>, /* dp2 */ |
| <0>, |
| <0>, /* dp3 */ |
| <0>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1_hsphy: phy@88e3000 { |
| compatible = "qcom,sm8650-snps-eusb2-phy", |
| "qcom,sm8550-snps-eusb2-phy"; |
| reg = <0 0x088e3000 0 0x154>; |
| |
| clocks = <&tcsr TCSR_USB2_CLKREF_EN>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_dp_qmpphy: phy@88e8000 { |
| compatible = "qcom,sm8650-qmp-usb3-dp-phy"; |
| reg = <0 0x088e8000 0 0x3000>; |
| |
| clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "aux", |
| "ref", |
| "com_aux", |
| "usb3_pipe"; |
| |
| resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, |
| <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; |
| reset-names = "phy", |
| "common"; |
| |
| power-domains = <&gcc USB3_PHY_GDSC>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <1>; |
| |
| orientation-switch; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_dp_qmpphy_out: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_dp_qmpphy_usb_ss_in: endpoint { |
| remote-endpoint = <&usb_1_dwc3_ss>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| usb_dp_qmpphy_dp_in: endpoint { |
| remote-endpoint = <&mdss_dp0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_1: usb@a6f8800 { |
| compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a6f8800 0 0x400>; |
| |
| interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 14 IRQ_TYPE_EDGE_RISING>, |
| <&pdc 15 IRQ_TYPE_EDGE_RISING>, |
| <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&tcsr TCSR_USB3_CLKREF_EN>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "xo"; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| usb_1_dwc3: usb@a600000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a600000 0 0xcd00>; |
| |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| |
| iommus = <&apps_smmu 0x40 0>; |
| |
| phys = <&usb_1_hsphy>, |
| <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; |
| phy-names = "usb2-phy", |
| "usb3-phy"; |
| |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,usb2-gadget-lpm-disable; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,is-utmi-l1-suspend; |
| snps,usb3_lpm_capable; |
| snps,usb2-lpm-disable; |
| snps,has-lpm-erratum; |
| tx-fifo-resize; |
| |
| dma-coherent; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_1_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_1_dwc3_ss: endpoint { |
| remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,sm8650-pdc", "qcom,pdc"; |
| reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; |
| |
| interrupt-parent = <&intc>; |
| |
| qcom,pdc-ranges = <0 480 94>, <94 609 31>, |
| <125 63 1>, <126 716 12>, |
| <138 251 5>, <143 244 4>; |
| |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| tsens0: thermal-sensor@c228000 { |
| compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; |
| reg = <0 0x0c228000 0 0x1000>, /* TM */ |
| <0 0x0c222000 0 0x1000>; /* SROT */ |
| |
| interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <15>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal-sensor@c229000 { |
| compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; |
| reg = <0 0x0c229000 0 0x1000>, /* TM */ |
| <0 0x0c223000 0 0x1000>; /* SROT */ |
| |
| interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <16>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens2: thermal-sensor@c22a000 { |
| compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; |
| reg = <0 0x0c22a000 0 0x1000>, /* TM */ |
| <0 0x0c224000 0 0x1000>; /* SROT */ |
| |
| interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <13>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| aoss_qmp: power-management@c300000 { |
| compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; |
| reg = <0 0x0c300000 0 0x400>; |
| |
| interrupt-parent = <&ipcc>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| #clock-cells = <0>; |
| }; |
| |
| sram@c3f0000 { |
| compatible = "qcom,rpmh-stats"; |
| reg = <0 0x0c3f0000 0 0x400>; |
| }; |
| |
| spmi_bus: spmi@c400000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0 0x0c400000 0 0x3000>, |
| <0 0x0c500000 0 0x400000>, |
| <0 0x0c440000 0 0x80000>, |
| <0 0x0c4c0000 0 0x20000>, |
| <0 0x0c42d000 0 0x4000>; |
| reg-names = "core", |
| "chnls", |
| "obsrvr", |
| "intr", |
| "cnfg"; |
| |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| qcom,bus-id = <0>; |
| |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| tlmm: pinctrl@f100000 { |
| compatible = "qcom,sm8650-tlmm"; |
| reg = <0 0x0f100000 0 0x300000>; |
| |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| gpio-ranges = <&tlmm 0 0 211>; |
| |
| wakeup-parent = <&pdc>; |
| |
| cci0_0_default: cci0-0-default-state { |
| sda-pins { |
| pins = "gpio113"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| scl-pins { |
| pins = "gpio114"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| }; |
| |
| cci0_0_sleep: cci0-0-sleep-state { |
| sda-pins { |
| pins = "gpio113"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| scl-pins { |
| pins = "gpio114"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| }; |
| |
| cci0_1_default: cci0-1-default-state { |
| sda-pins { |
| pins = "gpio115"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| scl-pins { |
| pins = "gpio116"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| }; |
| |
| cci0_1_sleep: cci0-1-sleep-state { |
| sda-pins { |
| pins = "gpio115"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| scl-pins { |
| pins = "gpio116"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| }; |
| |
| cci1_0_default: cci1-0-default-state { |
| sda-pins { |
| pins = "gpio117"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| scl-pins { |
| pins = "gpio118"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| }; |
| |
| cci1_0_sleep: cci1-0-sleep-state { |
| sda-pins { |
| pins = "gpio117"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| scl-pins { |
| pins = "gpio118"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| }; |
| |
| cci1_1_default: cci1-1-default-state { |
| sda-pins { |
| pins = "gpio12"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| scl-pins { |
| pins = "gpio13"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| }; |
| |
| cci1_1_sleep: cci1-1-sleep-state { |
| sda-pins { |
| pins = "gpio12"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| scl-pins { |
| pins = "gpio13"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| }; |
| |
| cci2_0_default: cci2-0-default-state { |
| sda-pins { |
| pins = "gpio112"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| scl-pins { |
| pins = "gpio153"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| }; |
| |
| cci2_0_sleep: cci2-0-sleep-state { |
| sda-pins { |
| pins = "gpio112"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| scl-pins { |
| pins = "gpio153"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| }; |
| |
| cci2_1_default: cci2-1-default-state { |
| sda-pins { |
| pins = "gpio119"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| scl-pins { |
| pins = "gpio120"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| }; |
| |
| cci2_1_sleep: cci2-1-sleep-state { |
| sda-pins { |
| pins = "gpio119"; |
| function = "cci_i2c_sda"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| scl-pins { |
| pins = "gpio120"; |
| function = "cci_i2c_scl"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| }; |
| |
| hub_i2c0_data_clk: hub-i2c0-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio64", "gpio65"; |
| function = "i2chub0_se0"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c1_data_clk: hub-i2c1-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio66", "gpio67"; |
| function = "i2chub0_se1"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c2_data_clk: hub-i2c2-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio68", "gpio69"; |
| function = "i2chub0_se2"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c3_data_clk: hub-i2c3-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio70", "gpio71"; |
| function = "i2chub0_se3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c4_data_clk: hub-i2c4-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio72", "gpio73"; |
| function = "i2chub0_se4"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c5_data_clk: hub-i2c5-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio74", "gpio75"; |
| function = "i2chub0_se5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c6_data_clk: hub-i2c6-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio76", "gpio77"; |
| function = "i2chub0_se6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c7_data_clk: hub-i2c7-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio78", "gpio79"; |
| function = "i2chub0_se7"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c8_data_clk: hub-i2c8-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio206", "gpio207"; |
| function = "i2chub0_se8"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| hub_i2c9_data_clk: hub-i2c9-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio80", "gpio81"; |
| function = "i2chub0_se9"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| pcie0_default_state: pcie0-default-state { |
| perst-pins { |
| pins = "gpio94"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| clkreq-pins { |
| pins = "gpio95"; |
| function = "pcie0_clk_req_n"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| wake-pins { |
| pins = "gpio96"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| pcie1_default_state: pcie1-default-state { |
| perst-pins { |
| pins = "gpio97"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| clkreq-pins { |
| pins = "gpio98"; |
| function = "pcie1_clk_req_n"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| wake-pins { |
| pins = "gpio99"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| qup_i2c0_data_clk: qup-i2c0-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio32", "gpio33"; |
| function = "qup1_se0"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c1_data_clk: qup-i2c1-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio36", "gpio37"; |
| function = "qup1_se1"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c2_data_clk: qup-i2c2-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio40", "gpio41"; |
| function = "qup1_se2"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c3_data_clk: qup-i2c3-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio44", "gpio45"; |
| function = "qup1_se3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c4_data_clk: qup-i2c4-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio48", "gpio49"; |
| function = "qup1_se4"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c5_data_clk: qup-i2c5-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio52", "gpio53"; |
| function = "qup1_se5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c6_data_clk: qup-i2c6-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio56", "gpio57"; |
| function = "qup1_se6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c7_data_clk: qup-i2c7-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio60", "gpio61"; |
| function = "qup1_se7"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c8_data_clk: qup-i2c8-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio0", "gpio1"; |
| function = "qup2_se0"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c9_data_clk: qup-i2c9-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio4", "gpio5"; |
| function = "qup2_se1"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c10_data_clk: qup-i2c10-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio8", "gpio9"; |
| function = "qup2_se2"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c11_data_clk: qup-i2c11-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio12", "gpio13"; |
| function = "qup2_se3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c12_data_clk: qup-i2c12-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio16", "gpio17"; |
| function = "qup2_se4"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c13_data_clk: qup-i2c13-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio20", "gpio21"; |
| function = "qup2_se5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c14_data_clk: qup-i2c14-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio24", "gpio25"; |
| function = "qup2_se6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi0_cs: qup-spi0-cs-state { |
| pins = "gpio35"; |
| function = "qup1_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi0_data_clk: qup-spi0-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio32", "gpio33", "gpio34"; |
| function = "qup1_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi1_cs: qup-spi1-cs-state { |
| pins = "gpio39"; |
| function = "qup1_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi1_data_clk: qup-spi1-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio36", "gpio37", "gpio38"; |
| function = "qup1_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi2_cs: qup-spi2-cs-state { |
| pins = "gpio43"; |
| function = "qup1_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi2_data_clk: qup-spi2-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio40", "gpio41", "gpio42"; |
| function = "qup1_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi3_cs: qup-spi3-cs-state { |
| pins = "gpio47"; |
| function = "qup1_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi3_data_clk: qup-spi3-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio44", "gpio45", "gpio46"; |
| function = "qup1_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi4_cs: qup-spi4-cs-state { |
| pins = "gpio51"; |
| function = "qup1_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi4_data_clk: qup-spi4-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio48", "gpio49", "gpio50"; |
| function = "qup1_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi5_cs: qup-spi5-cs-state { |
| pins = "gpio55"; |
| function = "qup1_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi5_data_clk: qup-spi5-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio52", "gpio53", "gpio54"; |
| function = "qup1_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi6_cs: qup-spi6-cs-state { |
| pins = "gpio59"; |
| function = "qup1_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi6_data_clk: qup-spi6-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio56", "gpio57", "gpio58"; |
| function = "qup1_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi7_cs: qup-spi7-cs-state { |
| pins = "gpio63"; |
| function = "qup1_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi7_data_clk: qup-spi7-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio60", "gpio61", "gpio62"; |
| function = "qup1_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi8_cs: qup-spi8-cs-state { |
| pins = "gpio3"; |
| function = "qup2_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi8_data_clk: qup-spi8-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio0", "gpio1", "gpio2"; |
| function = "qup2_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi9_cs: qup-spi9-cs-state { |
| pins = "gpio7"; |
| function = "qup2_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi9_data_clk: qup-spi9-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio4", "gpio5", "gpio6"; |
| function = "qup2_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi10_cs: qup-spi10-cs-state { |
| pins = "gpio11"; |
| function = "qup2_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi10_data_clk: qup-spi10-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio8", "gpio9", "gpio10"; |
| function = "qup2_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi11_cs: qup-spi11-cs-state { |
| pins = "gpio15"; |
| function = "qup2_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi11_data_clk: qup-spi11-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio12", "gpio13", "gpio14"; |
| function = "qup2_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi12_cs: qup-spi12-cs-state { |
| pins = "gpio19"; |
| function = "qup2_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi12_data_clk: qup-spi12-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio16", "gpio17", "gpio18"; |
| function = "qup2_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi13_cs: qup-spi13-cs-state { |
| pins = "gpio23"; |
| function = "qup2_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi13_data_clk: qup-spi13-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio20", "gpio21", "gpio22"; |
| function = "qup2_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi14_cs: qup-spi14-cs-state { |
| pins = "gpio27"; |
| function = "qup2_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi14_data_clk: qup-spi14-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio24", "gpio25", "gpio26"; |
| function = "qup2_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_uart14_default: qup-uart14-default-state { |
| /* TX, RX */ |
| pins = "gpio26", "gpio27"; |
| function = "qup2_se6"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_uart14_cts_rts: qup-uart14-cts-rts-state { |
| /* CTS, RTS */ |
| pins = "gpio24", "gpio25"; |
| function = "qup2_se6"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| qup_uart15_default: qup-uart15-default-state { |
| /* TX, RX */ |
| pins = "gpio30", "gpio31"; |
| function = "qup2_se7"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| sdc2_sleep: sdc2-sleep-state { |
| clk-pins { |
| pins = "sdc2_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc2_cmd"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc2_data"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| sdc2_default: sdc2-default-state { |
| clk-pins { |
| pins = "sdc2_clk"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc2_cmd"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc2_data"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| }; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0 0x15000000 0 0x100000>; |
| |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #iommu-cells = <2>; |
| #global-interrupts = <1>; |
| |
| dma-coherent; |
| }; |
| |
| intc: interrupt-controller@17100000 { |
| compatible = "arm,gic-v3"; |
| reg = <0 0x17100000 0 0x10000>, /* GICD */ |
| <0 0x17180000 0 0x200000>; /* GICR * 8 */ |
| |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; |
| |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| |
| #redistributor-regions = <1>; |
| redistributor-stride = <0 0x40000>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gic_its: msi-controller@17140000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0 0x17140000 0 0x20000>; |
| |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| }; |
| |
| timer@17420000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0 0x17420000 0 0x1000>; |
| |
| ranges = <0 0 0 0x20000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| frame@17421000 { |
| reg = <0x17421000 0x1000>, |
| <0x17422000 0x1000>; |
| |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <0>; |
| }; |
| |
| frame@17423000 { |
| reg = <0x17423000 0x1000>; |
| |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@17425000 { |
| reg = <0x17425000 0x1000>; |
| |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@17427000 { |
| reg = <0x17427000 0x1000>; |
| |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <3>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@17429000 { |
| reg = <0x17429000 0x1000>; |
| |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <4>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@1742b000 { |
| reg = <0x1742b000 0x1000>; |
| |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <5>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@1742d000 { |
| reg = <0x1742d000 0x1000>; |
| |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <6>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@17a00000 { |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0 0x17a00000 0 0x10000>, |
| <0 0x17a10000 0 0x10000>, |
| <0 0x17a20000 0 0x10000>, |
| <0 0x17a30000 0 0x10000>; |
| reg-names = "drv-0", |
| "drv-1", |
| "drv-2"; |
| |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| |
| power-domains = <&CLUSTER_PD>; |
| |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, |
| <WAKE_TCS 2>, <CONTROL_TCS 0>; |
| |
| label = "apps_rsc"; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,sm8650-rpmh-clk"; |
| |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| |
| #clock-cells = <1>; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,sm8650-rpmhpd"; |
| |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| #power-domain-cells = <1>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp-16 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_min_svs: opp-48 { |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs_d2: opp-52 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; |
| }; |
| |
| rpmhpd_opp_low_svs_d1: opp-56 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; |
| }; |
| |
| rpmhpd_opp_low_svs_d0: opp-60 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp-64 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs_l1: opp-80 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_svs: opp-128 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l0: opp-144 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp-192 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_nom: opp-256 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp-320 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_nom_l2: opp-336 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| }; |
| |
| rpmhpd_opp_turbo: opp-384 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp-416 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpufreq_hw: cpufreq@17d91000 { |
| compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss"; |
| reg = <0 0x17d91000 0 0x1000>, |
| <0 0x17d92000 0 0x1000>, |
| <0 0x17d93000 0 0x1000>, |
| <0 0x17d94000 0 0x1000>; |
| reg-names = "freq-domain0", |
| "freq-domain1", |
| "freq-domain2", |
| "freq-domain3"; |
| |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dcvsh-irq-0", |
| "dcvsh-irq-1", |
| "dcvsh-irq-2", |
| "dcvsh-irq-3"; |
| |
| clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| |
| #freq-domain-cells = <1>; |
| #clock-cells = <1>; |
| }; |
| |
| pmu@24091000 { |
| compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; |
| reg = <0 0x24091000 0 0x1000>; |
| |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&llcc_bwmon_opp_table>; |
| |
| llcc_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <2086000>; |
| }; |
| |
| opp-1 { |
| opp-peak-kBps = <2929000>; |
| }; |
| |
| opp-2 { |
| opp-peak-kBps = <5931000>; |
| }; |
| |
| opp-3 { |
| opp-peak-kBps = <6515000>; |
| }; |
| |
| opp-4 { |
| opp-peak-kBps = <7980000>; |
| }; |
| |
| opp-5 { |
| opp-peak-kBps = <10437000>; |
| }; |
| |
| opp-6 { |
| opp-peak-kBps = <12157000>; |
| }; |
| |
| opp-7 { |
| opp-peak-kBps = <14060000>; |
| }; |
| |
| opp-8 { |
| opp-peak-kBps = <16113000>; |
| }; |
| }; |
| }; |
| |
| pmu@240b7400 { |
| compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0 0x240b7400 0 0x600>; |
| |
| interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| |
| cpu_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <4577000>; |
| }; |
| |
| opp-1 { |
| opp-peak-kBps = <7110000>; |
| }; |
| |
| opp-2 { |
| opp-peak-kBps = <9155000>; |
| }; |
| |
| opp-3 { |
| opp-peak-kBps = <12298000>; |
| }; |
| |
| opp-4 { |
| opp-peak-kBps = <14236000>; |
| }; |
| |
| opp-5 { |
| opp-peak-kBps = <16265000>; |
| }; |
| }; |
| }; |
| |
| gem_noc: interconnect@24100000 { |
| compatible = "qcom,sm8650-gem-noc"; |
| reg = <0 0x24100000 0 0xc5080>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| system-cache-controller@25000000 { |
| compatible = "qcom,sm8650-llcc"; |
| reg = <0 0x25000000 0 0x200000>, |
| <0 0x25400000 0 0x200000>, |
| <0 0x25200000 0 0x200000>, |
| <0 0x25600000 0 0x200000>, |
| <0 0x25800000 0 0x200000>, |
| <0 0x25a00000 0 0x200000>; |
| reg-names = "llcc0_base", |
| "llcc1_base", |
| "llcc2_base", |
| "llcc3_base", |
| "llcc_broadcast_base", |
| "llcc_broadcast_and_base"; |
| |
| interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| remoteproc_adsp: remoteproc@30000000 { |
| compatible = "qcom,sm8650-adsp-pas"; |
| reg = <0 0x30000000 0 0x100>; |
| |
| interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| |
| power-domains = <&rpmhpd RPMHPD_LCX>, |
| <&rpmhpd RPMHPD_LMX>; |
| power-domain-names = "lcx", |
| "lmx"; |
| |
| memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_adsp_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| remoteproc_adsp_glink: glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| qcom,remote-pid = <2>; |
| |
| label = "lpass"; |
| |
| fastrpc { |
| compatible = "qcom,fastrpc"; |
| |
| qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| |
| label = "adsp"; |
| |
| qcom,non-secure-domain; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compute-cb@3 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <3>; |
| |
| iommus = <&apps_smmu 0x1003 0x80>, |
| <&apps_smmu 0x1043 0x20>; |
| dma-coherent; |
| }; |
| |
| compute-cb@4 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <4>; |
| |
| iommus = <&apps_smmu 0x1004 0x80>, |
| <&apps_smmu 0x1044 0x20>; |
| dma-coherent; |
| }; |
| |
| compute-cb@5 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <5>; |
| |
| iommus = <&apps_smmu 0x1005 0x80>, |
| <&apps_smmu 0x1045 0x20>; |
| dma-coherent; |
| }; |
| |
| compute-cb@6 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <6>; |
| |
| iommus = <&apps_smmu 0x1006 0x80>, |
| <&apps_smmu 0x1046 0x20>; |
| dma-coherent; |
| }; |
| |
| compute-cb@7 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <7>; |
| |
| iommus = <&apps_smmu 0x1007 0x40>, |
| <&apps_smmu 0x1067 0x0>, |
| <&apps_smmu 0x1087 0x0>; |
| dma-coherent; |
| }; |
| }; |
| |
| gpr { |
| compatible = "qcom,gpr"; |
| qcom,glink-channels = "adsp_apps"; |
| qcom,domain = <GPR_DOMAIN_ID_ADSP>; |
| qcom,intents = <512 20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| q6apm: service@1 { |
| compatible = "qcom,q6apm"; |
| reg = <GPR_APM_MODULE_IID>; |
| #sound-dai-cells = <0>; |
| qcom,protection-domain = "avs/audio", |
| "msm/adsp/audio_pd"; |
| |
| q6apmbedai: bedais { |
| compatible = "qcom,q6apm-lpass-dais"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| q6apmdai: dais { |
| compatible = "qcom,q6apm-dais"; |
| iommus = <&apps_smmu 0x1001 0x80>, |
| <&apps_smmu 0x1061 0x0>; |
| }; |
| }; |
| |
| q6prm: service@2 { |
| compatible = "qcom,q6prm"; |
| reg = <GPR_PRM_MODULE_IID>; |
| qcom,protection-domain = "avs/audio", |
| "msm/adsp/audio_pd"; |
| |
| q6prmcc: clock-controller { |
| compatible = "qcom,q6prm-lpass-clocks"; |
| #clock-cells = <2>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| nsp_noc: interconnect@320c0000 { |
| compatible = "qcom,sm8650-nsp-noc"; |
| reg = <0 0x320c0000 0 0xf080>; |
| |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| |
| #interconnect-cells = <2>; |
| }; |
| |
| remoteproc_cdsp: remoteproc@32300000 { |
| compatible = "qcom,sm8650-cdsp-pas"; |
| reg = <0 0x32300000 0 0x1400000>; |
| |
| interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| |
| power-domains = <&rpmhpd RPMHPD_CX>, |
| <&rpmhpd RPMHPD_MXC>, |
| <&rpmhpd RPMHPD_NSP>; |
| power-domain-names = "cx", |
| "mxc", |
| "nsp"; |
| |
| memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&smp2p_cdsp_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| qcom,remote-pid = <5>; |
| |
| label = "cdsp"; |
| |
| fastrpc { |
| compatible = "qcom,fastrpc"; |
| |
| qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| |
| label = "cdsp"; |
| |
| qcom,non-secure-domain; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| compute-cb@1 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <1>; |
| |
| iommus = <&apps_smmu 0x1961 0x0>, |
| <&apps_smmu 0x0c01 0x20>, |
| <&apps_smmu 0x19c1 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@2 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <2>; |
| |
| iommus = <&apps_smmu 0x1962 0x0>, |
| <&apps_smmu 0x0c02 0x20>, |
| <&apps_smmu 0x19c2 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@3 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <3>; |
| |
| iommus = <&apps_smmu 0x1963 0x0>, |
| <&apps_smmu 0x0c03 0x20>, |
| <&apps_smmu 0x19c3 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@4 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <4>; |
| |
| iommus = <&apps_smmu 0x1964 0x0>, |
| <&apps_smmu 0x0c04 0x20>, |
| <&apps_smmu 0x19c4 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@5 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <5>; |
| |
| iommus = <&apps_smmu 0x1965 0x0>, |
| <&apps_smmu 0x0c05 0x20>, |
| <&apps_smmu 0x19c5 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@6 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <6>; |
| |
| iommus = <&apps_smmu 0x1966 0x0>, |
| <&apps_smmu 0x0c06 0x20>, |
| <&apps_smmu 0x19c6 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@7 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <7>; |
| |
| iommus = <&apps_smmu 0x1967 0x0>, |
| <&apps_smmu 0x0c07 0x20>, |
| <&apps_smmu 0x19c7 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@8 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <8>; |
| |
| iommus = <&apps_smmu 0x1968 0x0>, |
| <&apps_smmu 0x0c08 0x20>, |
| <&apps_smmu 0x19c8 0x0>; |
| dma-coherent; |
| }; |
| |
| /* note: secure cb9 in downstream */ |
| |
| compute-cb@10 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <12>; |
| |
| iommus = <&apps_smmu 0x196c 0x0>, |
| <&apps_smmu 0x0c0c 0x20>, |
| <&apps_smmu 0x19cc 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@11 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <13>; |
| |
| iommus = <&apps_smmu 0x196d 0x0>, |
| <&apps_smmu 0x0c0d 0x20>, |
| <&apps_smmu 0x19cd 0x0>; |
| dma-coherent; |
| }; |
| |
| compute-cb@12 { |
| compatible = "qcom,fastrpc-compute-cb"; |
| reg = <14>; |
| |
| iommus = <&apps_smmu 0x196e 0x0>, |
| <&apps_smmu 0x0c0e 0x20>, |
| <&apps_smmu 0x19ce 0x0>; |
| dma-coherent; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| thermal-zones { |
| aoss0-thermal { |
| thermal-sensors = <&tsens0 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| aoss0-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss0-thermal { |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpuss0-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss1-thermal { |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpuss1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss2-thermal { |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpuss2-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss3-thermal { |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpuss3-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu2-top-thermal { |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu2-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu2-bottom-thermal { |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu2-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu3-top-thermal { |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu3-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu3-bottom-thermal { |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu3-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu4-top-thermal { |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu4-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu4-bottom-thermal { |
| thermal-sensors = <&tsens0 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu4-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu5-top-thermal { |
| thermal-sensors = <&tsens0 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu5-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu5-bottom-thermal { |
| thermal-sensors = <&tsens0 12>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu5-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu6-top-thermal { |
| thermal-sensors = <&tsens0 13>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu6-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu6-bottom-thermal { |
| thermal-sensors = <&tsens0 14>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu6-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss1-thermal { |
| thermal-sensors = <&tsens1 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| aoss1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu7-top-thermal { |
| thermal-sensors = <&tsens1 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu7-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu7-middle-thermal { |
| thermal-sensors = <&tsens1 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu7-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu7-bottom-thermal { |
| thermal-sensors = <&tsens1 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu7-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu0-thermal { |
| thermal-sensors = <&tsens1 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu0-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| thermal-sensors = <&tsens1 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu1-critical { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nsphvx0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nsphvx1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nsphvx1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nsphvx1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nsphmx0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nsphmx0-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nsphmx1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nsphmx1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nsphmx2-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nsphmx2-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nsphmx3-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nsphmx3-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| video-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 12>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| video-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ddr-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens1 13>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| ddr-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| camera0-thermal { |
| thermal-sensors = <&tsens1 14>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| camera0-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| camera1-thermal { |
| thermal-sensors = <&tsens1 15>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| camera1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss2-thermal { |
| thermal-sensors = <&tsens2 0>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| aoss2-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss0-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 1>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu0_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu0_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss1-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 2>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu1_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu1_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss2-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 3>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu2_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu2_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss3-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 4>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu3_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu3_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss4-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 5>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu4_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu4_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss5-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 6>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu5_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu5_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss6-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 7>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu6_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu6_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss7-thermal { |
| polling-delay-passive = <10>; |
| |
| thermal-sensors = <&tsens2 8>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu7_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu7_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| |
| trip-point1 { |
| temperature = <90000>; |
| hysteresis = <1000>; |
| type = "hot"; |
| }; |
| |
| trip-point2 { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| modem0-thermal { |
| thermal-sensors = <&tsens2 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| modem0-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| modem1-thermal { |
| thermal-sensors = <&tsens2 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| modem1-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| modem2-thermal { |
| thermal-sensors = <&tsens2 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| modem2-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| modem3-thermal { |
| thermal-sensors = <&tsens2 12>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| modem3-critical { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |