| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson |
| * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes |
| * 2000-12-* x86-64 compatibility mode signal handling by Andi Kleen |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/sched/task_stack.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/personality.h> |
| #include <linux/compat.h> |
| #include <linux/binfmts.h> |
| #include <linux/syscalls.h> |
| #include <asm/ucontext.h> |
| #include <linux/uaccess.h> |
| #include <asm/fpu/signal.h> |
| #include <asm/ptrace.h> |
| #include <asm/user32.h> |
| #include <uapi/asm/sigcontext.h> |
| #include <asm/proto.h> |
| #include <asm/vdso.h> |
| #include <asm/sigframe.h> |
| #include <asm/sighandling.h> |
| #include <asm/smap.h> |
| #include <asm/gsseg.h> |
| |
| #ifdef CONFIG_IA32_EMULATION |
| #include <asm/unistd_32_ia32.h> |
| |
| static inline void reload_segments(struct sigcontext_32 *sc) |
| { |
| unsigned int cur; |
| |
| savesegment(gs, cur); |
| if ((sc->gs | 0x03) != cur) |
| load_gs_index(sc->gs | 0x03); |
| savesegment(fs, cur); |
| if ((sc->fs | 0x03) != cur) |
| loadsegment(fs, sc->fs | 0x03); |
| savesegment(ds, cur); |
| if ((sc->ds | 0x03) != cur) |
| loadsegment(ds, sc->ds | 0x03); |
| savesegment(es, cur); |
| if ((sc->es | 0x03) != cur) |
| loadsegment(es, sc->es | 0x03); |
| } |
| |
| #define sigset32_t compat_sigset_t |
| #define siginfo32_t compat_siginfo_t |
| #define restore_altstack32 compat_restore_altstack |
| #define unsafe_save_altstack32 unsafe_compat_save_altstack |
| |
| #else |
| |
| #define sigset32_t sigset_t |
| #define siginfo32_t siginfo_t |
| #define __NR_ia32_sigreturn __NR_sigreturn |
| #define __NR_ia32_rt_sigreturn __NR_rt_sigreturn |
| #define restore_altstack32 restore_altstack |
| #define unsafe_save_altstack32 unsafe_save_altstack |
| #define __copy_siginfo_to_user32 copy_siginfo_to_user |
| |
| #endif |
| |
| /* |
| * Do a signal return; undo the signal stack. |
| */ |
| static bool ia32_restore_sigcontext(struct pt_regs *regs, |
| struct sigcontext_32 __user *usc) |
| { |
| struct sigcontext_32 sc; |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current->restart_block.fn = do_no_restart_syscall; |
| |
| if (unlikely(copy_from_user(&sc, usc, sizeof(sc)))) |
| return false; |
| |
| /* Get only the ia32 registers. */ |
| regs->bx = sc.bx; |
| regs->cx = sc.cx; |
| regs->dx = sc.dx; |
| regs->si = sc.si; |
| regs->di = sc.di; |
| regs->bp = sc.bp; |
| regs->ax = sc.ax; |
| regs->sp = sc.sp; |
| regs->ip = sc.ip; |
| |
| /* Get CS/SS and force CPL3 */ |
| regs->cs = sc.cs | 0x03; |
| regs->ss = sc.ss | 0x03; |
| |
| regs->flags = (regs->flags & ~FIX_EFLAGS) | (sc.flags & FIX_EFLAGS); |
| /* disable syscall checks */ |
| regs->orig_ax = -1; |
| |
| #ifdef CONFIG_IA32_EMULATION |
| /* |
| * Reload fs and gs if they have changed in the signal |
| * handler. This does not handle long fs/gs base changes in |
| * the handler, but does not clobber them at least in the |
| * normal case. |
| */ |
| reload_segments(&sc); |
| #else |
| loadsegment(gs, sc.gs); |
| regs->fs = sc.fs; |
| regs->es = sc.es; |
| regs->ds = sc.ds; |
| #endif |
| |
| return fpu__restore_sig(compat_ptr(sc.fpstate), 1); |
| } |
| |
| SYSCALL32_DEFINE0(sigreturn) |
| { |
| struct pt_regs *regs = current_pt_regs(); |
| struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(regs->sp-8); |
| sigset_t set; |
| |
| if (!access_ok(frame, sizeof(*frame))) |
| goto badframe; |
| if (__get_user(set.sig[0], &frame->sc.oldmask) |
| || __get_user(((__u32 *)&set)[1], &frame->extramask[0])) |
| goto badframe; |
| |
| set_current_blocked(&set); |
| |
| if (!ia32_restore_sigcontext(regs, &frame->sc)) |
| goto badframe; |
| return regs->ax; |
| |
| badframe: |
| signal_fault(regs, frame, "32bit sigreturn"); |
| return 0; |
| } |
| |
| SYSCALL32_DEFINE0(rt_sigreturn) |
| { |
| struct pt_regs *regs = current_pt_regs(); |
| struct rt_sigframe_ia32 __user *frame; |
| sigset_t set; |
| |
| frame = (struct rt_sigframe_ia32 __user *)(regs->sp - 4); |
| |
| if (!access_ok(frame, sizeof(*frame))) |
| goto badframe; |
| if (__get_user(*(__u64 *)&set, (__u64 __user *)&frame->uc.uc_sigmask)) |
| goto badframe; |
| |
| set_current_blocked(&set); |
| |
| if (!ia32_restore_sigcontext(regs, &frame->uc.uc_mcontext)) |
| goto badframe; |
| |
| if (restore_altstack32(&frame->uc.uc_stack)) |
| goto badframe; |
| |
| return regs->ax; |
| |
| badframe: |
| signal_fault(regs, frame, "32bit rt sigreturn"); |
| return 0; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| #define get_user_seg(seg) ({ unsigned int v; savesegment(seg, v); v; }) |
| |
| static __always_inline int |
| __unsafe_setup_sigcontext32(struct sigcontext_32 __user *sc, |
| void __user *fpstate, |
| struct pt_regs *regs, unsigned int mask) |
| { |
| unsafe_put_user(get_user_seg(gs), (unsigned int __user *)&sc->gs, Efault); |
| #ifdef CONFIG_IA32_EMULATION |
| unsafe_put_user(get_user_seg(fs), (unsigned int __user *)&sc->fs, Efault); |
| unsafe_put_user(get_user_seg(ds), (unsigned int __user *)&sc->ds, Efault); |
| unsafe_put_user(get_user_seg(es), (unsigned int __user *)&sc->es, Efault); |
| #else |
| unsafe_put_user(regs->fs, (unsigned int __user *)&sc->fs, Efault); |
| unsafe_put_user(regs->es, (unsigned int __user *)&sc->es, Efault); |
| unsafe_put_user(regs->ds, (unsigned int __user *)&sc->ds, Efault); |
| #endif |
| |
| unsafe_put_user(regs->di, &sc->di, Efault); |
| unsafe_put_user(regs->si, &sc->si, Efault); |
| unsafe_put_user(regs->bp, &sc->bp, Efault); |
| unsafe_put_user(regs->sp, &sc->sp, Efault); |
| unsafe_put_user(regs->bx, &sc->bx, Efault); |
| unsafe_put_user(regs->dx, &sc->dx, Efault); |
| unsafe_put_user(regs->cx, &sc->cx, Efault); |
| unsafe_put_user(regs->ax, &sc->ax, Efault); |
| unsafe_put_user(current->thread.trap_nr, &sc->trapno, Efault); |
| unsafe_put_user(current->thread.error_code, &sc->err, Efault); |
| unsafe_put_user(regs->ip, &sc->ip, Efault); |
| unsafe_put_user(regs->cs, (unsigned int __user *)&sc->cs, Efault); |
| unsafe_put_user(regs->flags, &sc->flags, Efault); |
| unsafe_put_user(regs->sp, &sc->sp_at_signal, Efault); |
| unsafe_put_user(regs->ss, (unsigned int __user *)&sc->ss, Efault); |
| |
| unsafe_put_user(ptr_to_compat(fpstate), &sc->fpstate, Efault); |
| |
| /* non-iBCS2 extensions.. */ |
| unsafe_put_user(mask, &sc->oldmask, Efault); |
| unsafe_put_user(current->thread.cr2, &sc->cr2, Efault); |
| return 0; |
| |
| Efault: |
| return -EFAULT; |
| } |
| |
| #define unsafe_put_sigcontext32(sc, fp, regs, set, label) \ |
| do { \ |
| if (__unsafe_setup_sigcontext32(sc, fp, regs, set->sig[0])) \ |
| goto label; \ |
| } while(0) |
| |
| int ia32_setup_frame(struct ksignal *ksig, struct pt_regs *regs) |
| { |
| sigset32_t *set = (sigset32_t *) sigmask_to_save(); |
| struct sigframe_ia32 __user *frame; |
| void __user *restorer; |
| void __user *fp = NULL; |
| |
| /* copy_to_user optimizes that into a single 8 byte store */ |
| static const struct { |
| u16 poplmovl; |
| u32 val; |
| u16 int80; |
| } __attribute__((packed)) code = { |
| 0xb858, /* popl %eax ; movl $...,%eax */ |
| __NR_ia32_sigreturn, |
| 0x80cd, /* int $0x80 */ |
| }; |
| |
| frame = get_sigframe(ksig, regs, sizeof(*frame), &fp); |
| |
| if (ksig->ka.sa.sa_flags & SA_RESTORER) { |
| restorer = ksig->ka.sa.sa_restorer; |
| } else { |
| /* Return stub is in 32bit vsyscall page */ |
| if (current->mm->context.vdso) |
| restorer = current->mm->context.vdso + |
| vdso_image_32.sym___kernel_sigreturn; |
| else |
| restorer = &frame->retcode; |
| } |
| |
| if (!user_access_begin(frame, sizeof(*frame))) |
| return -EFAULT; |
| |
| unsafe_put_user(ksig->sig, &frame->sig, Efault); |
| unsafe_put_sigcontext32(&frame->sc, fp, regs, set, Efault); |
| unsafe_put_user(set->sig[1], &frame->extramask[0], Efault); |
| unsafe_put_user(ptr_to_compat(restorer), &frame->pretcode, Efault); |
| /* |
| * These are actually not used anymore, but left because some |
| * gdb versions depend on them as a marker. |
| */ |
| unsafe_put_user(*((u64 *)&code), (u64 __user *)frame->retcode, Efault); |
| user_access_end(); |
| |
| /* Set up registers for signal handler */ |
| regs->sp = (unsigned long) frame; |
| regs->ip = (unsigned long) ksig->ka.sa.sa_handler; |
| |
| /* Make -mregparm=3 work */ |
| regs->ax = ksig->sig; |
| regs->dx = 0; |
| regs->cx = 0; |
| |
| #ifdef CONFIG_IA32_EMULATION |
| loadsegment(ds, __USER_DS); |
| loadsegment(es, __USER_DS); |
| #else |
| regs->ds = __USER_DS; |
| regs->es = __USER_DS; |
| #endif |
| |
| regs->cs = __USER32_CS; |
| regs->ss = __USER_DS; |
| |
| return 0; |
| Efault: |
| user_access_end(); |
| return -EFAULT; |
| } |
| |
| int ia32_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) |
| { |
| sigset32_t *set = (sigset32_t *) sigmask_to_save(); |
| struct rt_sigframe_ia32 __user *frame; |
| void __user *restorer; |
| void __user *fp = NULL; |
| |
| /* unsafe_put_user optimizes that into a single 8 byte store */ |
| static const struct { |
| u8 movl; |
| u32 val; |
| u16 int80; |
| u8 pad; |
| } __attribute__((packed)) code = { |
| 0xb8, |
| __NR_ia32_rt_sigreturn, |
| 0x80cd, |
| 0, |
| }; |
| |
| frame = get_sigframe(ksig, regs, sizeof(*frame), &fp); |
| |
| if (!user_access_begin(frame, sizeof(*frame))) |
| return -EFAULT; |
| |
| unsafe_put_user(ksig->sig, &frame->sig, Efault); |
| unsafe_put_user(ptr_to_compat(&frame->info), &frame->pinfo, Efault); |
| unsafe_put_user(ptr_to_compat(&frame->uc), &frame->puc, Efault); |
| |
| /* Create the ucontext. */ |
| if (static_cpu_has(X86_FEATURE_XSAVE)) |
| unsafe_put_user(UC_FP_XSTATE, &frame->uc.uc_flags, Efault); |
| else |
| unsafe_put_user(0, &frame->uc.uc_flags, Efault); |
| unsafe_put_user(0, &frame->uc.uc_link, Efault); |
| unsafe_save_altstack32(&frame->uc.uc_stack, regs->sp, Efault); |
| |
| if (ksig->ka.sa.sa_flags & SA_RESTORER) |
| restorer = ksig->ka.sa.sa_restorer; |
| else |
| restorer = current->mm->context.vdso + |
| vdso_image_32.sym___kernel_rt_sigreturn; |
| unsafe_put_user(ptr_to_compat(restorer), &frame->pretcode, Efault); |
| |
| /* |
| * Not actually used anymore, but left because some gdb |
| * versions need it. |
| */ |
| unsafe_put_user(*((u64 *)&code), (u64 __user *)frame->retcode, Efault); |
| unsafe_put_sigcontext32(&frame->uc.uc_mcontext, fp, regs, set, Efault); |
| unsafe_put_user(*(__u64 *)set, (__u64 __user *)&frame->uc.uc_sigmask, Efault); |
| user_access_end(); |
| |
| if (__copy_siginfo_to_user32(&frame->info, &ksig->info)) |
| return -EFAULT; |
| |
| /* Set up registers for signal handler */ |
| regs->sp = (unsigned long) frame; |
| regs->ip = (unsigned long) ksig->ka.sa.sa_handler; |
| |
| /* Make -mregparm=3 work */ |
| regs->ax = ksig->sig; |
| regs->dx = (unsigned long) &frame->info; |
| regs->cx = (unsigned long) &frame->uc; |
| |
| #ifdef CONFIG_IA32_EMULATION |
| loadsegment(ds, __USER_DS); |
| loadsegment(es, __USER_DS); |
| #else |
| regs->ds = __USER_DS; |
| regs->es = __USER_DS; |
| #endif |
| |
| regs->cs = __USER32_CS; |
| regs->ss = __USER_DS; |
| |
| return 0; |
| Efault: |
| user_access_end(); |
| return -EFAULT; |
| } |
| |
| /* |
| * The siginfo_t structure and handing code is very easy |
| * to break in several ways. It must always be updated when new |
| * updates are made to the main siginfo_t, and |
| * copy_siginfo_to_user32() must be updated when the |
| * (arch-independent) copy_siginfo_to_user() is updated. |
| * |
| * It is also easy to put a new member in the siginfo_t |
| * which has implicit alignment which can move internal structure |
| * alignment around breaking the ABI. This can happen if you, |
| * for instance, put a plain 64-bit value in there. |
| */ |
| |
| /* |
| * If adding a new si_code, there is probably new data in |
| * the siginfo. Make sure folks bumping the si_code |
| * limits also have to look at this code. Make sure any |
| * new fields are handled in copy_siginfo_to_user32()! |
| */ |
| static_assert(NSIGILL == 11); |
| static_assert(NSIGFPE == 15); |
| static_assert(NSIGSEGV == 10); |
| static_assert(NSIGBUS == 5); |
| static_assert(NSIGTRAP == 6); |
| static_assert(NSIGCHLD == 6); |
| static_assert(NSIGSYS == 2); |
| |
| /* This is part of the ABI and can never change in size: */ |
| static_assert(sizeof(siginfo32_t) == 128); |
| |
| /* This is a part of the ABI and can never change in alignment */ |
| static_assert(__alignof__(siginfo32_t) == 4); |
| |
| /* |
| * The offsets of all the (unioned) si_fields are fixed |
| * in the ABI, of course. Make sure none of them ever |
| * move and are always at the beginning: |
| */ |
| static_assert(offsetof(siginfo32_t, _sifields) == 3 * sizeof(int)); |
| |
| static_assert(offsetof(siginfo32_t, si_signo) == 0); |
| static_assert(offsetof(siginfo32_t, si_errno) == 4); |
| static_assert(offsetof(siginfo32_t, si_code) == 8); |
| |
| /* |
| * Ensure that the size of each si_field never changes. |
| * If it does, it is a sign that the |
| * copy_siginfo_to_user32() code below needs to updated |
| * along with the size in the CHECK_SI_SIZE(). |
| * |
| * We repeat this check for both the generic and compat |
| * siginfos. |
| * |
| * Note: it is OK for these to grow as long as the whole |
| * structure stays within the padding size (checked |
| * above). |
| */ |
| |
| #define CHECK_SI_OFFSET(name) \ |
| static_assert(offsetof(siginfo32_t, _sifields) == \ |
| offsetof(siginfo32_t, _sifields.name)) |
| |
| #define CHECK_SI_SIZE(name, size) \ |
| static_assert(sizeof_field(siginfo32_t, _sifields.name) == size) |
| |
| CHECK_SI_OFFSET(_kill); |
| CHECK_SI_SIZE (_kill, 2*sizeof(int)); |
| static_assert(offsetof(siginfo32_t, si_pid) == 0xC); |
| static_assert(offsetof(siginfo32_t, si_uid) == 0x10); |
| |
| CHECK_SI_OFFSET(_timer); |
| #ifdef CONFIG_COMPAT |
| /* compat_siginfo_t doesn't have si_sys_private */ |
| CHECK_SI_SIZE (_timer, 3*sizeof(int)); |
| #else |
| CHECK_SI_SIZE (_timer, 4*sizeof(int)); |
| #endif |
| static_assert(offsetof(siginfo32_t, si_tid) == 0x0C); |
| static_assert(offsetof(siginfo32_t, si_overrun) == 0x10); |
| static_assert(offsetof(siginfo32_t, si_value) == 0x14); |
| |
| CHECK_SI_OFFSET(_rt); |
| CHECK_SI_SIZE (_rt, 3*sizeof(int)); |
| static_assert(offsetof(siginfo32_t, si_pid) == 0x0C); |
| static_assert(offsetof(siginfo32_t, si_uid) == 0x10); |
| static_assert(offsetof(siginfo32_t, si_value) == 0x14); |
| |
| CHECK_SI_OFFSET(_sigchld); |
| CHECK_SI_SIZE (_sigchld, 5*sizeof(int)); |
| static_assert(offsetof(siginfo32_t, si_pid) == 0x0C); |
| static_assert(offsetof(siginfo32_t, si_uid) == 0x10); |
| static_assert(offsetof(siginfo32_t, si_status) == 0x14); |
| static_assert(offsetof(siginfo32_t, si_utime) == 0x18); |
| static_assert(offsetof(siginfo32_t, si_stime) == 0x1C); |
| |
| CHECK_SI_OFFSET(_sigfault); |
| CHECK_SI_SIZE (_sigfault, 4*sizeof(int)); |
| static_assert(offsetof(siginfo32_t, si_addr) == 0x0C); |
| |
| static_assert(offsetof(siginfo32_t, si_trapno) == 0x10); |
| |
| static_assert(offsetof(siginfo32_t, si_addr_lsb) == 0x10); |
| |
| static_assert(offsetof(siginfo32_t, si_lower) == 0x14); |
| static_assert(offsetof(siginfo32_t, si_upper) == 0x18); |
| |
| static_assert(offsetof(siginfo32_t, si_pkey) == 0x14); |
| |
| static_assert(offsetof(siginfo32_t, si_perf_data) == 0x10); |
| static_assert(offsetof(siginfo32_t, si_perf_type) == 0x14); |
| static_assert(offsetof(siginfo32_t, si_perf_flags) == 0x18); |
| |
| CHECK_SI_OFFSET(_sigpoll); |
| CHECK_SI_SIZE (_sigpoll, 2*sizeof(int)); |
| static_assert(offsetof(siginfo32_t, si_band) == 0x0C); |
| static_assert(offsetof(siginfo32_t, si_fd) == 0x10); |
| |
| CHECK_SI_OFFSET(_sigsys); |
| CHECK_SI_SIZE (_sigsys, 3*sizeof(int)); |
| static_assert(offsetof(siginfo32_t, si_call_addr) == 0x0C); |
| static_assert(offsetof(siginfo32_t, si_syscall) == 0x10); |
| static_assert(offsetof(siginfo32_t, si_arch) == 0x14); |
| |
| /* any new si_fields should be added here */ |