# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/atmel,quadspi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Atmel Quad Serial Peripheral Interface (QSPI)

maintainers:
  - Tudor Ambarus <tudor.ambarus@microchip.com>

allOf:
  - $ref: spi-controller.yaml#

properties:
  compatible:
    enum:
      - atmel,sama5d2-qspi
      - microchip,sam9x60-qspi
      - microchip,sama7g5-qspi
      - microchip,sama7g5-ospi

  reg:
    items:
      - description: base registers
      - description: mapped memory

  reg-names:
    items:
      - const: qspi_base
      - const: qspi_mmap

  clocks:
    minItems: 1
    items:
      - description: peripheral clock
      - description: system clock or generic clock, if available

  clock-names:
    minItems: 1
    items:
      - const: pclk
      - enum: [ qspick, gclk ]

  interrupts:
    maxItems: 1

  dmas:
    items:
      - description: tx DMA channel
      - description: rx DMA channel

  dma-names:
    items:
      - const: tx
      - const: rx

  '#address-cells':
    const: 1

  '#size-cells':
    const: 0

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - clocks
  - clock-names
  - '#address-cells'
  - '#size-cells'

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/at91.h>
    spi@f0020000 {
        compatible = "atmel,sama5d2-qspi";
        reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
        reg-names = "qspi_base", "qspi_mmap";
        interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
        clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
        clock-names = "pclk";
        #address-cells = <1>;
        #size-cells = <0>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_spi0_default>;

        flash@0 {
            compatible = "jedec,spi-nor";
            spi-max-frequency = <50000000>;
            reg = <0>;
            spi-rx-bus-width = <4>;
            spi-tx-bus-width = <4>;
        };
    };