Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e0e46f5..914c3d1 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -23,7 +23,7 @@
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the AS3711 PMIC from AMS
@@ -40,7 +40,7 @@
config MFD_AAT2870_CORE
bool "AnalogicTech AAT2870"
select MFD_CORE
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the AAT2870.
This driver provides common support for accessing the device,
@@ -78,7 +78,7 @@
config MFD_ASIC3
bool "Compaq ASIC3"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ depends on GPIOLIB && ARM
select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
@@ -104,7 +104,7 @@
select REGMAP_SPI
select REGMAP_IRQ
select PMIC_DA9052
- depends on SPI_MASTER=y && GENERIC_HARDIRQS
+ depends on SPI_MASTER=y
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using SPI. This driver provides common support
@@ -116,7 +116,7 @@
select REGMAP_I2C
select REGMAP_IRQ
select PMIC_DA9052
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using I2C. This driver provides common support
@@ -128,7 +128,7 @@
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Say yes here for support of Dialog Semiconductor DA9055. This is
a Power Management IC. This driver provides common support for
@@ -144,7 +144,7 @@
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
This includes the I2C driver and core APIs.
@@ -156,7 +156,7 @@
config MFD_MC13XXX
tristate
- depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+ depends on (SPI_MASTER || I2C)
select MFD_CORE
select MFD_MC13783
help
@@ -167,7 +167,7 @@
config MFD_MC13XXX_SPI
tristate "Freescale MC13783 and MC13892 SPI interface"
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
select REGMAP_SPI
select MFD_MC13XXX
help
@@ -175,7 +175,7 @@
config MFD_MC13XXX_I2C
tristate "Freescale MC13892 I2C interface"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select REGMAP_I2C
select MFD_MC13XXX
help
@@ -183,7 +183,7 @@
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ depends on GPIOLIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
@@ -192,7 +192,6 @@
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
select MFD_CORE
- depends on GENERIC_HARDIRQS
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -210,7 +209,7 @@
config LPC_ICH
tristate "Intel ICH LPC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
The LPC bridge function of the Intel ICH provides support for
@@ -220,7 +219,7 @@
config LPC_SCH
tristate "Intel SCH LPC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
LPC bridge function of the Intel SCH provides support for
@@ -238,7 +237,7 @@
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
This is the core driver for the Janz CMOD-IO PCI MODULbus
carrier board. This device is a PCI to MODULbus bridge which may
@@ -277,7 +276,7 @@
config MFD_88PM800
tristate "Marvell 88PM800"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
@@ -289,7 +288,7 @@
config MFD_88PM805
tristate "Marvell 88PM805"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
@@ -301,7 +300,7 @@
config MFD_88PM860X
bool "Marvell 88PM8606/88PM8607"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select MFD_CORE
help
@@ -312,7 +311,7 @@
config MFD_MAX77686
bool "Maxim Semiconductor MAX77686 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
@@ -325,7 +324,7 @@
config MFD_MAX77693
bool "Maxim Semiconductor MAX77693 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
@@ -339,7 +338,7 @@
config MFD_MAX8907
tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
help
@@ -350,7 +349,7 @@
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
@@ -360,7 +359,7 @@
config MFD_MAX8997
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select IRQ_DOMAIN
help
@@ -373,7 +372,7 @@
config MFD_MAX8998
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select IRQ_DOMAIN
help
@@ -385,7 +384,7 @@
config EZX_PCAP
bool "Motorola EZXPCAP Support"
- depends on GENERIC_HARDIRQS && SPI_MASTER
+ depends on SPI_MASTER
help
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
@@ -393,7 +392,7 @@
config MFD_VIPERBOARD
tristate "Nano River Technologies Viperboard"
select MFD_CORE
- depends on USB && GENERIC_HARDIRQS
+ depends on USB
default n
help
Say yes here if you want support for Nano River Technologies
@@ -407,7 +406,7 @@
config MFD_RETU
tristate "Nokia Retu and Tahvo multi-function device"
select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select REGMAP_IRQ
help
Retu and Tahvo are a multi-function devices found on Nokia
@@ -480,7 +479,7 @@
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
Say yes here if you want to have support for the RDC R-321x SoC
southbridge which provides access to GPIOs and Watchdog using the
@@ -488,7 +487,7 @@
config MFD_RTSX_PCI
tristate "Realtek PCI-E card reader"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
This supports for Realtek PCI-Express card reader including rts5209,
@@ -498,7 +497,7 @@
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
@@ -512,7 +511,7 @@
config MFD_SEC_CORE
bool "SAMSUNG Electronics PMIC Series Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -555,7 +554,7 @@
config MFD_SMSC
bool "SMSC ECE1099 series chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
@@ -577,7 +576,7 @@
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
+ depends on I2C=y && ABX500_CORE
select MFD_CORE
default y if ARCH_U300
help
@@ -601,7 +600,7 @@
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ depends on ABX500_CORE && MFD_DB8500_PRCMU
select POWER_SUPPLY
select MFD_CORE
select IRQ_DOMAIN
@@ -639,7 +638,7 @@
config MFD_STMPE
bool "STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+ depends on (I2C=y || SPI_MASTER=y)
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
@@ -680,7 +679,7 @@
config MFD_STA2X11
bool "STMicroelectronics STA2X11"
- depends on STA2X11 && GENERIC_HARDIRQS
+ depends on STA2X11
select MFD_CORE
select REGMAP_MMIO
@@ -700,7 +699,6 @@
select MFD_CORE
select REGMAP
select REGMAP_MMIO
- depends on GENERIC_HARDIRQS
help
If you say yes here you get support for Texas Instruments series
of Touch Screen /ADC chips.
@@ -717,7 +715,7 @@
config MFD_LP8788
bool "TI LP8788 Power Management Unit Driver"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
@@ -739,14 +737,14 @@
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
config MFD_TI_SSP
tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ depends on ARCH_DAVINCI_TNETV107X
select MFD_CORE
---help---
Say Y here if you want support for the Sequencer Serial Port
@@ -761,7 +759,6 @@
select REGULATOR
select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
- depends on GENERIC_HARDIRQS
help
This option enables a driver for the TP61050/TPS61052
high-power "white LED driver". This boost converter is
@@ -784,7 +781,7 @@
config TPS6507X
tristate "TI TPS6507x Power Management / Touch Screen chips"
select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
If you say yes here you get support for the TPS6507x series of
Power Management / Touch Screen chips. These include voltage
@@ -798,7 +795,7 @@
config MFD_TPS65090
bool "TI TPS65090 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -811,7 +808,7 @@
config MFD_TPS65217
tristate "TI TPS65217 Power Management / White LED chips"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select MFD_CORE
select REGMAP_I2C
help
@@ -826,7 +823,7 @@
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
@@ -841,7 +838,7 @@
config MFD_TPS65910
bool "TI TPS65910 Power Management chip"
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -862,7 +859,7 @@
bool "TI TPS65912 Power Management chip with I2C"
select MFD_CORE
select MFD_TPS65912
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the TPS65912 series of
PM chips with I2C interface.
@@ -871,14 +868,14 @@
bool "TI TPS65912 Power Management chip with SPI"
select MFD_CORE
select MFD_TPS65912
- depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
+ depends on SPI_MASTER && GPIOLIB
help
If you say yes here you get support for the TPS65912 series of
PM chips with SPI interface.
config MFD_TPS80031
bool "TI TPS80031/TPS80032 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -892,7 +889,7 @@
config TWL4030_CORE
bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select IRQ_DOMAIN
select REGMAP_I2C
help
@@ -931,13 +928,13 @@
config MFD_TWL4030_AUDIO
bool "TI TWL4030 Audio"
- depends on TWL4030_CORE && GENERIC_HARDIRQS
+ depends on TWL4030_CORE
select MFD_CORE
default n
config TWL6040_CORE
bool "TI TWL6040 audio codec"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -961,7 +958,7 @@
config MFD_WL1273_CORE
tristate "TI WL1273 FM radio"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select MFD_CORE
default n
help
@@ -974,7 +971,6 @@
depends on I2C
select MFD_CORE
select REGMAP_I2C
- depends on GENERIC_HARDIRQS
help
Say yes here to enable support for National Semiconductor / TI
LM3533 Lighting Power chips.
@@ -996,7 +992,7 @@
config MFD_TC3589X
bool "Toshiba TC35892 and variants"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
help
Support for the Toshiba TC35892 and variants I/O Expander.
@@ -1011,7 +1007,7 @@
config MFD_T7L66XB
bool "Toshiba T7L66XB"
- depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
+ depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
help
@@ -1036,7 +1032,7 @@
config MFD_VX855
tristate "VIA VX855/VX875 integrated south bridge"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
Say yes here to enable support for various functions of the
@@ -1054,7 +1050,7 @@
select MFD_ARIZONA
select MFD_CORE
select REGMAP_I2C
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
@@ -1064,7 +1060,7 @@
select MFD_ARIZONA
select MFD_CORE
select REGMAP_SPI
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
@@ -1090,7 +1086,7 @@
config MFD_WM8400
bool "Wolfson Microelectronics WM8400"
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -1100,7 +1096,6 @@
config MFD_WM831X
bool
- depends on GENERIC_HARDIRQS
config MFD_WM831X_I2C
bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
@@ -1108,7 +1103,7 @@
select MFD_WM831X
select REGMAP_I2C
select IRQ_DOMAIN
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
when controlled using I2C. This driver provides common support
@@ -1121,7 +1116,7 @@
select MFD_WM831X
select REGMAP_SPI
select IRQ_DOMAIN
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
when controlled using SPI. This driver provides common support
@@ -1130,12 +1125,11 @@
config MFD_WM8350
bool
- depends on GENERIC_HARDIRQS
config MFD_WM8350_I2C
bool "Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
The WM8350 is an integrated audio and power management
subsystem with watchdog and RTC functionality for embedded
@@ -1148,7 +1142,7 @@
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
The WM8994 is a highly integrated hi-fi CODEC designed for
smartphone applicatiosn. As well as audio functionality it
