[netdrvr] Remove Linux-specific changelogs from several Becker template drivers
When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code. These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.
Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9". These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.
Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 4b6ddb7..402961e 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -9,49 +9,10 @@
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
*/
-/*
- Rev Date Description
- ==========================================================================
- 0.01 2001/05/03 Created DL2000-based linux driver
- 0.02 2001/05/21 Added VLAN and hardware checksum support.
- 1.00 2001/06/26 Added jumbo frame support.
- 1.01 2001/08/21 Added two parameters, rx_coalesce and rx_timeout.
- 1.02 2001/10/08 Supported fiber media.
- Added flow control parameters.
- 1.03 2001/10/12 Changed the default media to 1000mbps_fd for
- the fiber devices.
- 1.04 2001/11/08 Fixed Tx stopped when tx very busy.
- 1.05 2001/11/22 Fixed Tx stopped when unidirectional tx busy.
- 1.06 2001/12/13 Fixed disconnect bug at 10Mbps mode.
- Fixed tx_full flag incorrect.
- Added tx_coalesce paramter.
- 1.07 2002/01/03 Fixed miscount of RX frame error.
- 1.08 2002/01/17 Fixed the multicast bug.
- 1.09 2002/03/07 Move rx-poll-now to re-fill loop.
- Added rio_timer() to watch rx buffers.
- 1.10 2002/04/16 Fixed miscount of carrier error.
- 1.11 2002/05/23 Added ISR schedule scheme
- Fixed miscount of rx frame error for DGE-550SX.
- Fixed VLAN bug.
- 1.12 2002/06/13 Lock tx_coalesce=1 on 10/100Mbps mode.
- 1.13 2002/08/13 1. Fix disconnection (many tx:carrier/rx:frame
- errs) with some mainboards.
- 2. Use definition "DRV_NAME" "DRV_VERSION"
- "DRV_RELDATE" for flexibility.
- 1.14 2002/08/14 Support ethtool.
- 1.15 2002/08/27 Changed the default media to Auto-Negotiation
- for the fiber devices.
- 1.16 2002/09/04 More power down time for fiber devices auto-
- negotiation.
- Fix disconnect bug after ifup and ifdown.
- 1.17 2002/10/03 Fix RMON statistics overflow.
- Always use I/O mapping to access eeprom,
- avoid system freezing with some chipsets.
-*/
#define DRV_NAME "D-Link DL2000-based linux driver"
-#define DRV_VERSION "v1.17b"
-#define DRV_RELDATE "2006/03/10"
+#define DRV_VERSION "v1.18"
+#define DRV_RELDATE "2006/06/27"
#include "dl2k.h"
#include <linux/dma-mapping.h>
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 7bcd939..1b212a5 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -20,22 +20,15 @@
Support and updates available at
http://www.scyld.com/network/hamachi.html
+ [link no longer provides useful info -jgarzik]
or
http://www.parl.clemson.edu/~keithu/hamachi.html
-
-
- Linux kernel changelog:
-
- LK1.0.1:
- - fix lack of pci_dev<->dev association
- - ethtool support (jgarzik)
-
*/
#define DRV_NAME "hamachi"
-#define DRV_VERSION "1.01+LK1.0.1"
-#define DRV_RELDATE "5/18/2001"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
/* A few user-configurable values. */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 9df2628..db0475a 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -20,120 +20,9 @@
Support information and updates available at
http://www.scyld.com/network/netsemi.html
+ [link no longer provides useful info -jgarzik]
- Linux kernel modifications:
-
- Version 1.0.1:
- - Spinlock fixes
- - Bug fixes and better intr performance (Tjeerd)
- Version 1.0.2:
- - Now reads correct MAC address from eeprom
- Version 1.0.3:
- - Eliminate redundant priv->tx_full flag
- - Call netif_start_queue from dev->tx_timeout
- - wmb() in start_tx() to flush data
- - Update Tx locking
- - Clean up PCI enable (davej)
- Version 1.0.4:
- - Merge Donald Becker's natsemi.c version 1.07
- Version 1.0.5:
- - { fill me in }
- Version 1.0.6:
- * ethtool support (jgarzik)
- * Proper initialization of the card (which sometimes
- fails to occur and leaves the card in a non-functional
- state). (uzi)
-
- * Some documented register settings to optimize some
- of the 100Mbit autodetection circuitry in rev C cards. (uzi)
-
- * Polling of the PHY intr for stuff like link state
- change and auto- negotiation to finally work properly. (uzi)
-
- * One-liner removal of a duplicate declaration of
- netdev_error(). (uzi)
-
- Version 1.0.7: (Manfred Spraul)
- * pci dma
- * SMP locking update
- * full reset added into tx_timeout
- * correct multicast hash generation (both big and little endian)
- [copied from a natsemi driver version
- from Myrio Corporation, Greg Smith]
- * suspend/resume
-
- version 1.0.8 (Tim Hockin <thockin@sun.com>)
- * ETHTOOL_* support
- * Wake on lan support (Erik Gilling)
- * MXDMA fixes for serverworks
- * EEPROM reload
-
- version 1.0.9 (Manfred Spraul)
- * Main change: fix lack of synchronize
- netif_close/netif_suspend against a last interrupt
- or packet.
- * do not enable superflous interrupts (e.g. the
- drivers relies on TxDone - TxIntr not needed)
- * wait that the hardware has really stopped in close
- and suspend.
- * workaround for the (at least) gcc-2.95.1 compiler
- problem. Also simplifies the code a bit.
- * disable_irq() in tx_timeout - needed to protect
- against rx interrupts.
- * stop the nic before switching into silent rx mode
- for wol (required according to docu).
-
- version 1.0.10:
- * use long for ee_addr (various)
- * print pointers properly (DaveM)
- * include asm/irq.h (?)
-
- version 1.0.11:
- * check and reset if PHY errors appear (Adrian Sun)
- * WoL cleanup (Tim Hockin)
- * Magic number cleanup (Tim Hockin)
- * Don't reload EEPROM on every reset (Tim Hockin)
- * Save and restore EEPROM state across reset (Tim Hockin)
- * MDIO Cleanup (Tim Hockin)
- * Reformat register offsets/bits (jgarzik)
-
- version 1.0.12:
- * ETHTOOL_* further support (Tim Hockin)
-
- version 1.0.13:
- * ETHTOOL_[G]EEPROM support (Tim Hockin)
-
- version 1.0.13:
- * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>)
-
- version 1.0.14:
- * Cleanup some messages and autoneg in ethtool (Tim Hockin)
-
- version 1.0.15:
- * Get rid of cable_magic flag
- * use new (National provided) solution for cable magic issue
-
- version 1.0.16:
- * call netdev_rx() for RxErrors (Manfred Spraul)
- * formatting and cleanups
- * change options and full_duplex arrays to be zero
- initialized
- * enable only the WoL and PHY interrupts in wol mode
-
- version 1.0.17:
- * only do cable_magic on 83815 and early 83816 (Tim Hockin)
- * create a function for rx refill (Manfred Spraul)
- * combine drain_ring and init_ring (Manfred Spraul)
- * oom handling (Manfred Spraul)
- * hands_off instead of playing with netif_device_{de,a}ttach
- (Manfred Spraul)
- * be sure to write the MAC back to the chip (Manfred Spraul)
- * lengthen EEPROM timeout, and always warn about timeouts
- (Manfred Spraul)
- * comments update (Manfred)
- * do the right thing on a phy-reset (Manfred and Tim)
-
TODO:
* big endian support with CFG:BEM instead of cpu_to_le32
*/
@@ -165,8 +54,8 @@
#include <asm/uaccess.h>
#define DRV_NAME "natsemi"
-#define DRV_VERSION "1.07+LK1.0.17"
-#define DRV_RELDATE "Sep 27, 2002"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
#define RX_OFFSET 2
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index ed1f599..24d55b4 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -22,129 +22,13 @@
Support and updates available at
http://www.scyld.com/network/starfire.html
+ [link no longer provides useful info -jgarzik]
- -----------------------------------------------------------
-
- Linux kernel-specific changes:
-
- LK1.1.1 (jgarzik):
- - Use PCI driver interface
- - Fix MOD_xxx races
- - softnet fixups
-
- LK1.1.2 (jgarzik):
- - Merge Becker version 0.15
-
- LK1.1.3 (Andrew Morton)
- - Timer cleanups
-
- LK1.1.4 (jgarzik):
- - Merge Becker version 1.03
-
- LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>)
- - Support hardware Rx/Tx checksumming
- - Use the GFP firmware taken from Adaptec's Netware driver
-
- LK1.2.2 (Ion Badulescu)
- - Backported to 2.2.x
-
- LK1.2.3 (Ion Badulescu)
- - Fix the flaky mdio interface
- - More compat clean-ups
-
- LK1.2.4 (Ion Badulescu)
- - More 2.2.x initialization fixes
-
- LK1.2.5 (Ion Badulescu)
- - Several fixes from Manfred Spraul
-
- LK1.2.6 (Ion Badulescu)
- - Fixed ifup/ifdown/ifup problem in 2.4.x
-
- LK1.2.7 (Ion Badulescu)
- - Removed unused code
- - Made more functions static and __init
-
- LK1.2.8 (Ion Badulescu)
- - Quell bogus error messages, inform about the Tx threshold
- - Removed #ifdef CONFIG_PCI, this driver is PCI only
-
- LK1.2.9 (Ion Badulescu)
- - Merged Jeff Garzik's changes from 2.4.4-pre5
- - Added 2.2.x compatibility stuff required by the above changes
-
- LK1.2.9a (Ion Badulescu)
- - More updates from Jeff Garzik
-
- LK1.3.0 (Ion Badulescu)
- - Merged zerocopy support
-
- LK1.3.1 (Ion Badulescu)
- - Added ethtool support
- - Added GPIO (media change) interrupt support
-
- LK1.3.2 (Ion Badulescu)
- - Fixed 2.2.x compatibility issues introduced in 1.3.1
- - Fixed ethtool ioctl returning uninitialized memory
-
- LK1.3.3 (Ion Badulescu)
- - Initialize the TxMode register properly
- - Don't dereference dev->priv after freeing it
-
- LK1.3.4 (Ion Badulescu)
- - Fixed initialization timing problems
- - Fixed interrupt mask definitions
-
- LK1.3.5 (jgarzik)
- - ethtool NWAY_RST, GLINK, [GS]MSGLVL support
-
- LK1.3.6:
- - Sparc64 support and fixes (Ion Badulescu)
- - Better stats and error handling (Ion Badulescu)
- - Use new pci_set_mwi() PCI API function (jgarzik)
-
- LK1.3.7 (Ion Badulescu)
- - minimal implementation of tx_timeout()
- - correctly shutdown the Rx/Tx engines in netdev_close()
- - added calls to netif_carrier_on/off
- (patch from Stefan Rompf <srompf@isg.de>)
- - VLAN support
-
- LK1.3.8 (Ion Badulescu)
- - adjust DMA burst size on sparc64
- - 64-bit support
- - reworked zerocopy support for 64-bit buffers
- - working and usable interrupt mitigation/latency
- - reduced Tx interrupt frequency for lower interrupt overhead
-
- LK1.3.9 (Ion Badulescu)
- - bugfix for mcast filter
- - enable the right kind of Tx interrupts (TxDMADone, not TxDone)
-
- LK1.4.0 (Ion Badulescu)
- - NAPI support
-
- LK1.4.1 (Ion Badulescu)
- - flush PCI posting buffers after disabling Rx interrupts
- - put the chip to a D3 slumber on driver unload
- - added config option to enable/disable NAPI
-
- LK1.4.2 (Ion Badulescu)
- - finally added firmware (GPL'ed by Adaptec)
- - removed compatibility code for 2.2.x
-
- LK1.4.2.1 (Ion Badulescu)
- - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM
- - added 32-bit padding to outgoing skb's, removed previous workaround
-
-TODO: - fix forced speed/duplexing code (broken a long time ago, when
- somebody converted the driver to use the generic MII code)
- - fix VLAN support
*/
#define DRV_NAME "starfire"
-#define DRV_VERSION "1.03+LK1.4.2.1"
-#define DRV_RELDATE "October 3, 2005"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
#include <linux/module.h>
#include <linux/kernel.h>
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 643fcea..de66451 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -16,91 +16,13 @@
Support and updates available at
http://www.scyld.com/network/sundance.html
+ [link no longer provides useful info -jgarzik]
-
- Version LK1.01a (jgarzik):
- - Replace some MII-related magic numbers with constants
-
- Version LK1.02 (D-Link):
- - Add new board to PCI ID list
- - Fix multicast bug
-
- Version LK1.03 (D-Link):
- - New Rx scheme, reduce Rx congestion
- - Option to disable flow control
-
- Version LK1.04 (D-Link):
- - Tx timeout recovery
- - More support for ethtool.
-
- Version LK1.04a:
- - Remove unused/constant members from struct pci_id_info
- (which then allows removal of 'drv_flags' from private struct)
- (jgarzik)
- - If no phy is found, fail to load that board (jgarzik)
- - Always start phy id scan at id 1 to avoid problems (Donald Becker)
- - Autodetect where mii_preable_required is needed,
- default to not needed. (Donald Becker)
-
- Version LK1.04b:
- - Remove mii_preamble_required module parameter (Donald Becker)
- - Add per-interface mii_preamble_required (setting is autodetected)
- (Donald Becker)
- - Remove unnecessary cast from void pointer (jgarzik)
- - Re-align comments in private struct (jgarzik)
-
- Version LK1.04c (jgarzik):
- - Support bitmapped message levels (NETIF_MSG_xxx), and the
- two ethtool ioctls that get/set them
- - Don't hand-code MII ethtool support, use standard API/lib
-
- Version LK1.04d:
- - Merge from Donald Becker's sundance.c: (Jason Lunz)
- * proper support for variably-sized MTUs
- * default to PIO, to fix chip bugs
- - Add missing unregister_netdev (Jason Lunz)
- - Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
- - Better rx buf size calculation (Donald Becker)
-
- Version LK1.05 (D-Link):
- - Fix DFE-580TX packet drop issue (for DL10050C)
- - Fix reset_tx logic
-
- Version LK1.06 (D-Link):
- - Fix crash while unloading driver
-
- Versin LK1.06b (D-Link):
- - New tx scheme, adaptive tx_coalesce
-
- Version LK1.07 (D-Link):
- - Fix tx bugs in big-endian machines
- - Remove unused max_interrupt_work module parameter, the new
- NAPI-like rx scheme doesn't need it.
- - Remove redundancy get_stats() in intr_handler(), those
- I/O access could affect performance in ARM-based system
- - Add Linux software VLAN support
-
- Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- - Fix bug of custom mac address
- (StationAddr register only accept word write)
-
- Version LK1.09 (D-Link):
- - Fix the flowctrl bug.
- - Set Pause bit in MII ANAR if flow control enabled.
-
- Version LK1.09a (ICPlus):
- - Add the delay time in reading the contents of EEPROM
-
- Version LK1.10 (Philippe De Muyter phdm@macqel.be):
- - Make 'unblock interface after Tx underrun' work
-
- Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
- - Add support for IC Plus Corporation IP100A chipset
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.11"
-#define DRV_RELDATE "14-Jun-2006"
+#define DRV_VERSION "1.1"
+#define DRV_RELDATE "27-Jun-2006"
/* The user-configurable values.
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index 091ebb7..17ca7dc 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -10,26 +10,11 @@
410 Severn Ave., Suite 210
Annapolis MD 21403
- -----------------------------------------------------------
-
- Linux kernel-specific changes:
-
- LK1.0 (Ion Badulescu)
- - Major cleanup
- - Use 2.4 PCI API
- - Support ethtool
- - Rewrite perfect filter/hash code
- - Use interrupts for media changes
-
- LK1.1 (Ion Badulescu)
- - Disallow negotiation of unsupported full-duplex modes
*/
#define DRV_NAME "xircom_tulip_cb"
-#define DRV_VERSION "0.91+LK1.1"
-#define DRV_RELDATE "October 11, 2001"
-
-#define CARDBUS 1
+#define DRV_VERSION "0.92"
+#define DRV_RELDATE "June 27, 2006"
/* A few user-configurable values. */
@@ -306,10 +291,10 @@
struct xircom_tx_desc tx_ring[TX_RING_SIZE];
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
struct sk_buff* tx_skbuff[TX_RING_SIZE];
-#ifdef CARDBUS
+
/* The X3201-3 requires 4-byte aligned tx bufs */
struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE];
-#endif
+
/* The addresses of receive-in-place skbuffs. */
struct sk_buff* rx_skbuff[RX_RING_SIZE];
u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */
@@ -908,10 +893,8 @@
tp->tx_skbuff[i] = NULL;
tp->tx_ring[i].status = 0;
tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]);
-#ifdef CARDBUS
if (tp->chip_id == X3201_3)
tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ);
-#endif /* CARDBUS */
}
tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]);
}
@@ -931,12 +914,10 @@
entry = tp->cur_tx % TX_RING_SIZE;
tp->tx_skbuff[entry] = skb;
-#ifdef CARDBUS
if (tp->chip_id == X3201_3) {
memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
} else
-#endif
tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 98b6f32..e48e76c 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -25,117 +25,13 @@
version. He may or may not be interested in bug reports on this
code. You can find his versions at:
http://www.scyld.com/network/via-rhine.html
-
-
- Linux kernel version history:
-
- LK1.1.0:
- - Jeff Garzik: softnet 'n stuff
-
- LK1.1.1:
- - Justin Guyett: softnet and locking fixes
- - Jeff Garzik: use PCI interface
-
- LK1.1.2:
- - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
-
- LK1.1.3:
- - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
- code) update "Theory of Operation" with
- softnet/locking changes
- - Dave Miller: PCI DMA and endian fixups
- - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
-
- LK1.1.4:
- - Urban Widmark: fix gcc 2.95.2 problem and
- remove writel's to fixed address 0x7c
-
- LK1.1.5:
- - Urban Widmark: mdio locking, bounce buffer changes
- merges from Beckers 1.05 version
- added netif_running_on/off support
-
- LK1.1.6:
- - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
- set netif_running_on/off on startup, del_timer_sync
-
- LK1.1.7:
- - Manfred Spraul: added reset into tx_timeout
-
- LK1.1.9:
- - Urban Widmark: merges from Beckers 1.10 version
- (media selection + eeprom reload)
- - David Vrabel: merges from D-Link "1.11" version
- (disable WOL and PME on startup)
-
- LK1.1.10:
- - Manfred Spraul: use "singlecopy" for unaligned buffers
- don't allocate bounce buffers for !ReqTxAlign cards
-
- LK1.1.11:
- - David Woodhouse: Set dev->base_addr before the first time we call
- wait_for_reset(). It's a lot happier that way.
- Free np->tx_bufs only if we actually allocated it.
-
- LK1.1.12:
- - Martin Eriksson: Allow Memory-Mapped IO to be enabled.
-
- LK1.1.13 (jgarzik):
- - Add ethtool support
- - Replace some MII-related magic numbers with constants
-
- LK1.1.14 (Ivan G.):
- - fixes comments for Rhine-III
- - removes W_MAX_TIMEOUT (unused)
- - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
- is R-I and has Davicom chip, flag is referenced in kernel driver)
- - sends chip_id as a parameter to wait_for_reset since np is not
- initialized on first call
- - changes mmio "else if (chip_id==VT6102)" to "else" so it will work
- for Rhine-III's (documentation says same bit is correct)
- - transmit frame queue message is off by one - fixed
- - adds IntrNormalSummary to "Something Wicked" exclusion list
- so normal interrupts will not trigger the message (src: Donald Becker)
- (Roger Luethi)
- - show confused chip where to continue after Tx error
- - location of collision counter is chip specific
- - allow selecting backoff algorithm (module parameter)
-
- LK1.1.15 (jgarzik):
- - Use new MII lib helper generic_mii_ioctl
-
- LK1.1.16 (Roger Luethi)
- - Etherleak fix
- - Handle Tx buffer underrun
- - Fix bugs in full duplex handling
- - New reset code uses "force reset" cmd on Rhine-II
- - Various clean ups
-
- LK1.1.17 (Roger Luethi)
- - Fix race in via_rhine_start_tx()
- - On errors, wait for Tx engine to turn off before scavenging
- - Handle Tx descriptor write-back race on Rhine-II
- - Force flushing for PCI posted writes
- - More reset code changes
-
- LK1.1.18 (Roger Luethi)
- - No filtering multicast in promisc mode (Edward Peng)
- - Fix for Rhine-I Tx timeouts
-
- LK1.1.19 (Roger Luethi)
- - Increase Tx threshold for unspecified errors
-
- LK1.2.0-2.6 (Roger Luethi)
- - Massive clean-up
- - Rewrite PHY, media handling (remove options, full_duplex, backoff)
- - Fix Tx engine race for good
- - Craig Brind: Zero padded aligned buffers for short packets.
+ [link no longer provides useful info -jgarzik]
*/
#define DRV_NAME "via-rhine"
-#define DRV_VERSION "1.2.0-2.6"
-#define DRV_RELDATE "June-10-2004"
+#define DRV_VERSION "1.4.0"
+#define DRV_RELDATE "June-27-2006"
/* A few user-configurable values.
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index bbbf7e2..207340f 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -19,37 +19,13 @@
Support and updates available at
http://www.scyld.com/network/yellowfin.html
+ [link no longer provides useful info -jgarzik]
-
- Linux kernel changelog:
- -----------------------
-
- LK1.1.1 (jgarzik): Port to 2.4 kernel
-
- LK1.1.2 (jgarzik):
- * Merge in becker version 1.05
-
- LK1.1.3 (jgarzik):
- * Various cleanups
- * Update yellowfin_timer to correctly calculate duplex.
- (suggested by Manfred Spraul)
-
- LK1.1.4 (val@nmt.edu):
- * Fix three endian-ness bugs
- * Support dual function SYM53C885E ethernet chip
-
- LK1.1.5 (val@nmt.edu):
- * Fix forced full-duplex bug I introduced
-
- LK1.1.6 (val@nmt.edu):
- * Only print warning on truly "oversized" packets
- * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior
-
*/
#define DRV_NAME "yellowfin"
-#define DRV_VERSION "1.05+LK1.1.6"
-#define DRV_RELDATE "Feb 11, 2002"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "Jun 27, 2006"
#define PFX DRV_NAME ": "
