diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 55d5ae2..01ac4a0 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -1020,6 +1020,196 @@ int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
 	return -ETIMEDOUT;
 }
 
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register depending on the
+ * PHY type
+ */
+void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
+{
+	u32 hcfg, val;
+
+	if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+	     hsotg->params.ulpi_fs_ls) ||
+	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+		/* Full speed PHY */
+		val = HCFG_FSLSPCLKSEL_48_MHZ;
+	} else {
+		/* High speed PHY running at full speed or high speed */
+		val = HCFG_FSLSPCLKSEL_30_60_MHZ;
+	}
+
+	dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
+	hcfg = dwc2_readl(hsotg, HCFG);
+	hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+	hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
+	dwc2_writel(hsotg, hcfg, HCFG);
+}
+
+static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+	u32 usbcfg, ggpio, i2cctl;
+	int retval = 0;
+
+	/*
+	 * core_init() is now called on every switch so only call the
+	 * following for the first time through
+	 */
+	if (select_phy) {
+		dev_dbg(hsotg->dev, "FS PHY selected\n");
+
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		if (!(usbcfg & GUSBCFG_PHYSEL)) {
+			usbcfg |= GUSBCFG_PHYSEL;
+			dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+			/* Reset after a PHY select */
+			retval = dwc2_core_reset(hsotg, false);
+
+			if (retval) {
+				dev_err(hsotg->dev,
+					"%s: Reset failed, aborting", __func__);
+				return retval;
+			}
+		}
+
+		if (hsotg->params.activate_stm_fs_transceiver) {
+			ggpio = dwc2_readl(hsotg, GGPIO);
+			if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
+				dev_dbg(hsotg->dev, "Activating transceiver\n");
+				/*
+				 * STM32F4x9 uses the GGPIO register as general
+				 * core configuration register.
+				 */
+				ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
+				dwc2_writel(hsotg, ggpio, GGPIO);
+			}
+		}
+	}
+
+	/*
+	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
+	 * do this on HNP Dev/Host mode switches (done in dev_init and
+	 * host_init).
+	 */
+	if (dwc2_is_host_mode(hsotg))
+		dwc2_init_fs_ls_pclk_sel(hsotg);
+
+	if (hsotg->params.i2c_enable) {
+		dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
+
+		/* Program GUSBCFG.OtgUtmiFsSel to I2C */
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+		/* Program GI2CCTL.I2CEn */
+		i2cctl = dwc2_readl(hsotg, GI2CCTL);
+		i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
+		i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
+		i2cctl &= ~GI2CCTL_I2CEN;
+		dwc2_writel(hsotg, i2cctl, GI2CCTL);
+		i2cctl |= GI2CCTL_I2CEN;
+		dwc2_writel(hsotg, i2cctl, GI2CCTL);
+	}
+
+	return retval;
+}
+
+static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+	u32 usbcfg, usbcfg_old;
+	int retval = 0;
+
+	if (!select_phy)
+		return 0;
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg_old = usbcfg;
+
+	/*
+	 * HS PHY parameters. These parameters are preserved during soft reset
+	 * so only program the first time. Do a soft reset immediately after
+	 * setting phyif.
+	 */
+	switch (hsotg->params.phy_type) {
+	case DWC2_PHY_TYPE_PARAM_ULPI:
+		/* ULPI interface */
+		dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
+		usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
+		usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
+		if (hsotg->params.phy_ulpi_ddr)
+			usbcfg |= GUSBCFG_DDRSEL;
+
+		/* Set external VBUS indicator as needed. */
+		if (hsotg->params.oc_disable)
+			usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
+				   GUSBCFG_INDICATORPASSTHROUGH);
+		break;
+	case DWC2_PHY_TYPE_PARAM_UTMI:
+		/* UTMI+ interface */
+		dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
+		usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
+		if (hsotg->params.phy_utmi_width == 16)
+			usbcfg |= GUSBCFG_PHYIF16;
+		break;
+	default:
+		dev_err(hsotg->dev, "FS PHY selected at HS!\n");
+		break;
+	}
+
+	if (usbcfg != usbcfg_old) {
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+		/* Reset after setting the PHY parameters */
+		retval = dwc2_core_reset(hsotg, false);
+		if (retval) {
+			dev_err(hsotg->dev,
+				"%s: Reset failed, aborting", __func__);
+			return retval;
+		}
+	}
+
+	return retval;
+}
+
+int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+	u32 usbcfg;
+	int retval = 0;
+
+	if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
+	     hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
+	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+		/* If FS/LS mode with FS/LS PHY */
+		retval = dwc2_fs_phy_init(hsotg, select_phy);
+		if (retval)
+			return retval;
+	} else {
+		/* High speed PHY */
+		retval = dwc2_hs_phy_init(hsotg, select_phy);
+		if (retval)
+			return retval;
+	}
+
+	if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+	    hsotg->params.ulpi_fs_ls) {
+		dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		usbcfg |= GUSBCFG_ULPI_FS_LS;
+		usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+	} else {
+		usbcfg = dwc2_readl(hsotg, GUSBCFG);
+		usbcfg &= ~GUSBCFG_ULPI_FS_LS;
+		usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
+		dwc2_writel(hsotg, usbcfg, GUSBCFG);
+	}
+
+	return retval;
+}
+
 MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
 MODULE_AUTHOR("Synopsys, Inc.");
 MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 8e3edf1..9f3fc8e1 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1286,6 +1286,8 @@ int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, bool restore);
 int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host);
 int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
 		int reset, int is_host);
+void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg);
+int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy);
 
 void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host);
 void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 978232a9..7ac7b52 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -97,196 +97,6 @@ static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
 	dwc2_writel(hsotg, intmsk, GINTMSK);
 }
 
-/*
- * Initializes the FSLSPClkSel field of the HCFG register depending on the
- * PHY type
- */
-static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
-{
-	u32 hcfg, val;
-
-	if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
-	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
-	     hsotg->params.ulpi_fs_ls) ||
-	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
-		/* Full speed PHY */
-		val = HCFG_FSLSPCLKSEL_48_MHZ;
-	} else {
-		/* High speed PHY running at full speed or high speed */
-		val = HCFG_FSLSPCLKSEL_30_60_MHZ;
-	}
-
-	dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
-	hcfg = dwc2_readl(hsotg, HCFG);
-	hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
-	hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
-	dwc2_writel(hsotg, hcfg, HCFG);
-}
-
-static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
-	u32 usbcfg, ggpio, i2cctl;
-	int retval = 0;
-
-	/*
-	 * core_init() is now called on every switch so only call the
-	 * following for the first time through
-	 */
-	if (select_phy) {
-		dev_dbg(hsotg->dev, "FS PHY selected\n");
-
-		usbcfg = dwc2_readl(hsotg, GUSBCFG);
-		if (!(usbcfg & GUSBCFG_PHYSEL)) {
-			usbcfg |= GUSBCFG_PHYSEL;
-			dwc2_writel(hsotg, usbcfg, GUSBCFG);
-
-			/* Reset after a PHY select */
-			retval = dwc2_core_reset(hsotg, false);
-
-			if (retval) {
-				dev_err(hsotg->dev,
-					"%s: Reset failed, aborting", __func__);
-				return retval;
-			}
-		}
-
-		if (hsotg->params.activate_stm_fs_transceiver) {
-			ggpio = dwc2_readl(hsotg, GGPIO);
-			if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
-				dev_dbg(hsotg->dev, "Activating transceiver\n");
-				/*
-				 * STM32F4x9 uses the GGPIO register as general
-				 * core configuration register.
-				 */
-				ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
-				dwc2_writel(hsotg, ggpio, GGPIO);
-			}
-		}
-	}
-
-	/*
-	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
-	 * do this on HNP Dev/Host mode switches (done in dev_init and
-	 * host_init).
-	 */
-	if (dwc2_is_host_mode(hsotg))
-		dwc2_init_fs_ls_pclk_sel(hsotg);
-
-	if (hsotg->params.i2c_enable) {
-		dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
-
-		/* Program GUSBCFG.OtgUtmiFsSel to I2C */
-		usbcfg = dwc2_readl(hsotg, GUSBCFG);
-		usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
-		dwc2_writel(hsotg, usbcfg, GUSBCFG);
-
-		/* Program GI2CCTL.I2CEn */
-		i2cctl = dwc2_readl(hsotg, GI2CCTL);
-		i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
-		i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
-		i2cctl &= ~GI2CCTL_I2CEN;
-		dwc2_writel(hsotg, i2cctl, GI2CCTL);
-		i2cctl |= GI2CCTL_I2CEN;
-		dwc2_writel(hsotg, i2cctl, GI2CCTL);
-	}
-
-	return retval;
-}
-
-static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
-	u32 usbcfg, usbcfg_old;
-	int retval = 0;
-
-	if (!select_phy)
-		return 0;
-
-	usbcfg = dwc2_readl(hsotg, GUSBCFG);
-	usbcfg_old = usbcfg;
-
-	/*
-	 * HS PHY parameters. These parameters are preserved during soft reset
-	 * so only program the first time. Do a soft reset immediately after
-	 * setting phyif.
-	 */
-	switch (hsotg->params.phy_type) {
-	case DWC2_PHY_TYPE_PARAM_ULPI:
-		/* ULPI interface */
-		dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
-		usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
-		usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
-		if (hsotg->params.phy_ulpi_ddr)
-			usbcfg |= GUSBCFG_DDRSEL;
-
-		/* Set external VBUS indicator as needed. */
-		if (hsotg->params.oc_disable)
-			usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
-				   GUSBCFG_INDICATORPASSTHROUGH);
-		break;
-	case DWC2_PHY_TYPE_PARAM_UTMI:
-		/* UTMI+ interface */
-		dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
-		usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
-		if (hsotg->params.phy_utmi_width == 16)
-			usbcfg |= GUSBCFG_PHYIF16;
-		break;
-	default:
-		dev_err(hsotg->dev, "FS PHY selected at HS!\n");
-		break;
-	}
-
-	if (usbcfg != usbcfg_old) {
-		dwc2_writel(hsotg, usbcfg, GUSBCFG);
-
-		/* Reset after setting the PHY parameters */
-		retval = dwc2_core_reset(hsotg, false);
-		if (retval) {
-			dev_err(hsotg->dev,
-				"%s: Reset failed, aborting", __func__);
-			return retval;
-		}
-	}
-
-	return retval;
-}
-
-static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
-	u32 usbcfg;
-	int retval = 0;
-
-	if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
-	     hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
-	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
-		/* If FS/LS mode with FS/LS PHY */
-		retval = dwc2_fs_phy_init(hsotg, select_phy);
-		if (retval)
-			return retval;
-	} else {
-		/* High speed PHY */
-		retval = dwc2_hs_phy_init(hsotg, select_phy);
-		if (retval)
-			return retval;
-	}
-
-	if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
-	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
-	    hsotg->params.ulpi_fs_ls) {
-		dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
-		usbcfg = dwc2_readl(hsotg, GUSBCFG);
-		usbcfg |= GUSBCFG_ULPI_FS_LS;
-		usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
-		dwc2_writel(hsotg, usbcfg, GUSBCFG);
-	} else {
-		usbcfg = dwc2_readl(hsotg, GUSBCFG);
-		usbcfg &= ~GUSBCFG_ULPI_FS_LS;
-		usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
-		dwc2_writel(hsotg, usbcfg, GUSBCFG);
-	}
-
-	return retval;
-}
-
 static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
 {
 	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);