net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation
In order to properly support VLAN filtering being enabled/disabled on a
bridge, while having other ports being non bridge port members, we need
to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make
sure the non-bridge ports can continue receiving VLAN tags, even when
the switch is globally configured to do ingress/egress VID checking.
Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer
NULL, we now need to check that in these two functions.
We specifically deal with two possibly problematic cases:
- creating a bridge VLAN entry while there is an existing VLAN device
claiming that same VID
- creating a VLAN device while there is an existing bridge VLAN entry
with that VID
Those are both resolved with returning -EBUSY back to user-space.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index f7f5d12..90629b1 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -983,6 +983,72 @@ static int dsa_slave_get_ts_info(struct net_device *dev,
return ds->ops->get_ts_info(ds, p->dp->index, ts);
}
+static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
+ u16 vid)
+{
+ struct dsa_port *dp = dsa_slave_to_port(dev);
+ struct switchdev_obj_port_vlan vlan = {
+ .vid_begin = vid,
+ .vid_end = vid,
+ /* This API only allows programming tagged, non-PVID VIDs */
+ .flags = 0,
+ };
+ struct bridge_vlan_info info;
+ int ret;
+
+ /* Check for a possible bridge VLAN entry now since there is no
+ * need to emulate the switchdev prepare + commit phase.
+ */
+ if (dp->bridge_dev) {
+ /* br_vlan_get_info() returns -EINVAL or -ENOENT if the
+ * device, respectively the VID is not found, returning
+ * 0 means success, which is a failure for us here.
+ */
+ ret = br_vlan_get_info(dp->bridge_dev, vid, &info);
+ if (ret == 0)
+ return -EBUSY;
+ }
+
+ ret = dsa_port_vlan_add(dp, &vlan, NULL);
+ if (ret == -EOPNOTSUPP)
+ ret = 0;
+
+ return ret;
+}
+
+static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
+ u16 vid)
+{
+ struct dsa_port *dp = dsa_slave_to_port(dev);
+ struct switchdev_obj_port_vlan vlan = {
+ .vid_begin = vid,
+ .vid_end = vid,
+ /* This API only allows programming tagged, non-PVID VIDs */
+ .flags = 0,
+ };
+ struct bridge_vlan_info info;
+ int ret;
+
+ /* Check for a possible bridge VLAN entry now since there is no
+ * need to emulate the switchdev prepare + commit phase.
+ */
+ if (dp->bridge_dev) {
+ /* br_vlan_get_info() returns -EINVAL or -ENOENT if the
+ * device, respectively the VID is not found, returning
+ * 0 means success, which is a failure for us here.
+ */
+ ret = br_vlan_get_info(dp->bridge_dev, vid, &info);
+ if (ret == 0)
+ return -EBUSY;
+ }
+
+ ret = dsa_port_vlan_del(dp, &vlan);
+ if (ret == -EOPNOTSUPP)
+ ret = 0;
+
+ return ret;
+}
+
static const struct ethtool_ops dsa_slave_ethtool_ops = {
.get_drvinfo = dsa_slave_get_drvinfo,
.get_regs_len = dsa_slave_get_regs_len,
@@ -1048,6 +1114,8 @@ static const struct net_device_ops dsa_slave_netdev_ops = {
.ndo_setup_tc = dsa_slave_setup_tc,
.ndo_get_stats64 = dsa_slave_get_stats64,
.ndo_get_port_parent_id = dsa_slave_get_port_parent_id,
+ .ndo_vlan_rx_add_vid = dsa_slave_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = dsa_slave_vlan_rx_kill_vid,
};
static const struct switchdev_ops dsa_slave_switchdev_ops = {
@@ -1307,7 +1375,8 @@ int dsa_slave_create(struct dsa_port *port)
if (slave_dev == NULL)
return -ENOMEM;
- slave_dev->features = master->vlan_features | NETIF_F_HW_TC;
+ slave_dev->features = master->vlan_features | NETIF_F_HW_TC |
+ NETIF_F_HW_VLAN_CTAG_FILTER;
slave_dev->hw_features |= NETIF_F_HW_TC;
slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
eth_hw_addr_inherit(slave_dev, master);
