/*
 * API bus driver for ADT7316/7/8 ADT7516/7/9 digital temperature
 * sensor, ADC and DAC
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>

#include "adt7316.h"

#define ADT7316_SPI_MAX_FREQ_HZ		5000000
#define ADT7316_SPI_CMD_READ		0x91
#define ADT7316_SPI_CMD_WRITE		0x90

/*
 * adt7316 register access by SPI
 */

static int adt7316_spi_multi_read(void *client, u8 reg, u8 count, u8 *data)
{
	struct spi_device *spi_dev = client;
	u8 cmd[2];
	int ret = 0;

	if (count > ADT7316_REG_MAX_ADDR)
		count = ADT7316_REG_MAX_ADDR;

	cmd[0] = ADT7316_SPI_CMD_WRITE;
	cmd[1] = reg;

	ret = spi_write(spi_dev, cmd, 2);
	if (ret < 0) {
		dev_err(&spi_dev->dev, "SPI fail to select reg\n");
		return ret;
	}

	cmd[0] = ADT7316_SPI_CMD_READ;

	ret = spi_write_then_read(spi_dev, cmd, 1, data, count);
	if (ret < 0) {
		dev_err(&spi_dev->dev, "SPI read data error\n");
		return ret;
	}

	return 0;
}

static int adt7316_spi_multi_write(void *client, u8 reg, u8 count, u8 *data)
{
	struct spi_device *spi_dev = client;
	u8 buf[ADT7316_REG_MAX_ADDR + 2];
	int i, ret = 0;

	if (count > ADT7316_REG_MAX_ADDR)
		count = ADT7316_REG_MAX_ADDR;

	buf[0] = ADT7316_SPI_CMD_WRITE;
	buf[1] = reg;
	for (i = 0; i < count; i++)
		buf[i + 2] = data[i];

	ret = spi_write(spi_dev, buf, count + 2);
	if (ret < 0) {
		dev_err(&spi_dev->dev, "SPI write error\n");
		return ret;
	}

	return ret;
}

static int adt7316_spi_read(void *client, u8 reg, u8 *data)
{
	return adt7316_spi_multi_read(client, reg, 1, data);
}

static int adt7316_spi_write(void *client, u8 reg, u8 val)
{
	return adt7316_spi_multi_write(client, reg, 1, &val);
}

/*
 * device probe and remove
 */

static int __devinit adt7316_spi_probe(struct spi_device *spi_dev)
{
	struct adt7316_bus bus = {
		.client = spi_dev,
		.irq = spi_dev->irq,
		.irq_flags = IRQF_TRIGGER_LOW,
		.read = adt7316_spi_read,
		.write = adt7316_spi_write,
		.multi_read = adt7316_spi_multi_read,
		.multi_write = adt7316_spi_multi_write,
	};

	/* don't exceed max specified SPI CLK frequency */
	if (spi_dev->max_speed_hz > ADT7316_SPI_MAX_FREQ_HZ) {
		dev_err(&spi_dev->dev, "SPI CLK %d Hz?\n",
			spi_dev->max_speed_hz);
		return -EINVAL;
	}

	/* switch from default I2C protocol to SPI protocol */
	adt7316_spi_write(spi_dev, 0, 0);
	adt7316_spi_write(spi_dev, 0, 0);
	adt7316_spi_write(spi_dev, 0, 0);

	return adt7316_probe(&spi_dev->dev, &bus, spi_dev->modalias);
}

static int __devexit adt7316_spi_remove(struct spi_device *spi_dev)
{
	return adt7316_remove(&spi_dev->dev);
}

static const struct spi_device_id adt7316_spi_id[] = {
	{ "adt7316", 0 },
	{ "adt7317", 0 },
	{ "adt7318", 0 },
	{ "adt7516", 0 },
	{ "adt7517", 0 },
	{ "adt7519", 0 },
	{ }
};

MODULE_DEVICE_TABLE(spi, adt7316_spi_id);

static struct spi_driver adt7316_driver = {
	.driver = {
		.name = "adt7316",
		.pm = ADT7316_PM_OPS,
		.owner = THIS_MODULE,
	},
	.probe = adt7316_spi_probe,
	.remove = __devexit_p(adt7316_spi_remove),
	.id_table = adt7316_spi_id,
};
module_spi_driver(adt7316_driver);

MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
MODULE_DESCRIPTION("SPI bus driver for Analog Devices ADT7316/7/8 and"
			"ADT7516/7/9 digital temperature sensor, ADC and DAC");
MODULE_LICENSE("GPL v2");