// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
 *
 *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
 *
 *  Author: Eugen Hristev <eugen.hristev@microchip.com>
 *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
 *
 */

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Microchip SAMA7G5 family SoC";
	compatible = "microchip,sama7g5";
	#address-cells = <1>;
	#size-cells = <1>;
	interrupt-parent = <&gic>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x0>;
		};
	};

	clocks {
		slow_xtal: slow_xtal {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};

		main_xtal: main_xtal {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};

		usb_clk: usb_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <48000000>;
		};
	};

	vddout25: fixed-regulator-vddout25 {
		compatible = "regulator-fixed";

		regulator-name = "VDDOUT25";
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		regulator-boot-on;
		status = "disabled";
	};

	ns_sram: sram@100000 {
		compatible = "mmio-sram";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x100000 0x20000>;
		ranges;
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		securam: securam@e0000000 {
			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
			reg = <0xe0000000 0x4000>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0xe0000000 0x4000>;
			no-memory-wc;
			status = "okay";
		};

		secumod: secumod@e0004000 {
			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
			reg = <0xe0004000 0x4000>;
			gpio-controller;
			#gpio-cells = <2>;
		};

		sfrbu: sfr@e0008000 {
			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
			reg = <0xe0008000 0x20>;
		};

		pioA: pinctrl@e0014000 {
			compatible = "microchip,sama7g5-pinctrl";
			reg = <0xe0014000 0x800>;
			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <2>;
			gpio-controller;
			#gpio-cells = <2>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
		};

		pmc: pmc@e0018000 {
			compatible = "microchip,sama7g5-pmc", "syscon";
			reg = <0xe0018000 0x200>;
			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
			#clock-cells = <2>;
			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
			clock-names = "td_slck", "md_slck", "main_xtal";
		};

		shdwc: shdwc@e001d010 {
			compatible = "microchip,sama7g5-shdwc", "syscon";
			reg = <0xe001d010 0x10>;
			clocks = <&clk32k 0>;
			#address-cells = <1>;
			#size-cells = <0>;
			atmel,wakeup-rtc-timer;
			atmel,wakeup-rtt-timer;
			status = "disabled";
		};

		rtt: rtt@e001d020 {
			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
			reg = <0xe001d020 0x30>;
			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk32k 0>;
		};

		clk32k: clock-controller@e001d050 {
			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
			reg = <0xe001d050 0x4>;
			clocks = <&slow_xtal>;
			#clock-cells = <1>;
		};

		gpbr: gpbr@e001d060 {
			compatible = "microchip,sama7g5-gpbr", "syscon";
			reg = <0xe001d060 0x48>;
		};

		rtc: rtc@e001d0a8 {
			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
			reg = <0xe001d0a8 0x30>;
			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk32k 1>;
		};

		ps_wdt: watchdog@e001d180 {
			compatible = "microchip,sama7g5-wdt";
			reg = <0xe001d180 0x24>;
			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk32k 0>;
		};

		chipid@e0020000 {
			compatible = "microchip,sama7g5-chipid";
			reg = <0xe0020000 0x8>;
		};

		tcb1: timer@e0800000 {
			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0xe0800000 0x100>;
			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
		};

		adc: adc@e1000000 {
			compatible = "microchip,sama7g5-adc";
			reg = <0xe1000000 0x200>;
			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_GCK 26>;
			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
			assigned-clock-rates = <100000000>;
			clock-names = "adc_clk";
			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
			dma-names = "rx";
			atmel,min-sample-rate-hz = <200000>;
			atmel,max-sample-rate-hz = <20000000>;
			atmel,startup-time-ms = <4>;
			status = "disabled";
		};

		sdmmc0: mmc@e1204000 {
			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
			reg = <0xe1204000 0x4000>;
			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
			clock-names = "hclock", "multclk";
			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
			assigned-clock-rates = <200000000>;
			microchip,sdcal-inverted;
			status = "disabled";
		};

		sdmmc1: mmc@e1208000 {
			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
			reg = <0xe1208000 0x4000>;
			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
			clock-names = "hclock", "multclk";
			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
			assigned-clock-rates = <200000000>;
			microchip,sdcal-inverted;
			status = "disabled";
		};

		sdmmc2: mmc@e120c000 {
			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
			reg = <0xe120c000 0x4000>;
			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
			clock-names = "hclock", "multclk";
			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
			assigned-clock-rates = <200000000>;
			microchip,sdcal-inverted;
			status = "disabled";
		};

		pwm: pwm@e1604000 {
			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
			reg = <0xe1604000 0x4000>;
			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
			#pwm-cells = <3>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
			status = "disabled";
		};

		spdifrx: spdifrx@e1614000 {
			#sound-dai-cells = <0>;
			compatible = "microchip,sama7g5-spdifrx";
			reg = <0xe1614000 0x4000>;
			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
			dma-names = "rx";
			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
			clock-names = "pclk", "gclk";
			status = "disabled";
		};

		spdiftx: spdiftx@e1618000 {
			#sound-dai-cells = <0>;
			compatible = "microchip,sama7g5-spdiftx";
			reg = <0xe1618000 0x4000>;
			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
			dma-names = "tx";
			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
			clock-names = "pclk", "gclk";
		};

		i2s0: i2s@e161c000 {
			compatible = "microchip,sama7g5-i2smcc";
			#sound-dai-cells = <0>;
			reg = <0xe161c000 0x4000>;
			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
			dma-names = "tx", "rx";
			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
			clock-names = "pclk", "gclk";
			status = "disabled";
		};

		i2s1: i2s@e1620000 {
			compatible = "microchip,sama7g5-i2smcc";
			#sound-dai-cells = <0>;
			reg = <0xe1620000 0x4000>;
			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
			dma-names = "tx", "rx";
			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
			clock-names = "pclk", "gclk";
			status = "disabled";
		};

		pit64b0: timer@e1800000 {
			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
			reg = <0xe1800000 0x4000>;
			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
			clock-names = "pclk", "gclk";
		};

		pit64b1: timer@e1804000 {
			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
			reg = <0xe1804000 0x4000>;
			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
			clock-names = "pclk", "gclk";
		};

		flx0: flexcom@e1818000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe1818000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe1818000 0x800>;
			status = "disabled";

			uart0: serial@200 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0x200 0x200>;
				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
				clock-names = "usart";
				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
					<&dma1 AT91_XDMAC_DT_PERID(5)>;
				dma-names = "tx", "rx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};
		};

		flx1: flexcom@e181c000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe181c000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe181c000 0x800>;
			status = "disabled";

			i2c1: i2c@600 {
				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
				reg = <0x600 0x200>;
				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
				atmel,fifo-size = <32>;
				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
					<&dma0 AT91_XDMAC_DT_PERID(8)>;
				dma-names = "rx", "tx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};
		};

		flx3: flexcom@e1824000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe1824000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe1824000 0x800>;
			status = "disabled";

			uart3: serial@200 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0x200 0x200>;
				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
				clock-names = "usart";
				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
					<&dma1 AT91_XDMAC_DT_PERID(11)>;
				dma-names = "tx", "rx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};
		};

		trng: rng@e2010000 {
			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
			reg = <0xe2010000 0x100>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
			status = "disabled";
		};

		flx4: flexcom@e2018000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe2018000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe2018000 0x800>;
			status = "disabled";

			uart4: serial@200 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0x200 0x200>;
				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
				clock-names = "usart";
				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
					<&dma1 AT91_XDMAC_DT_PERID(13)>;
				dma-names = "tx", "rx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				atmel,fifo-size = <16>;
				status = "disabled";
			};
		};

		flx7: flexcom@e2024000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe2024000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe2024000 0x800>;
			status = "disabled";

			uart7: serial@200 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0x200 0x200>;
				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
				clock-names = "usart";
				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
					<&dma1 AT91_XDMAC_DT_PERID(19)>;
				dma-names = "tx", "rx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				atmel,fifo-size = <16>;
				status = "disabled";
			};
		};

		gmac0: ethernet@e2800000 {
			compatible = "microchip,sama7g5-gem";
			reg = <0xe2800000 0x1000>;
			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
			assigned-clock-rates = <125000000>;
			status = "disabled";
		};

		gmac1: ethernet@e2804000 {
			compatible = "microchip,sama7g5-emac";
			reg = <0xe2804000 0x1000>;
			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
			clock-names = "pclk", "hclk";
			status = "disabled";
		};

		dma0: dma-controller@e2808000 {
			compatible = "microchip,sama7g5-dma";
			reg = <0xe2808000 0x1000>;
			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
			clock-names = "dma_clk";
			status = "disabled";
		};

		dma1: dma-controller@e280c000 {
			compatible = "microchip,sama7g5-dma";
			reg = <0xe280c000 0x1000>;
			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
			clock-names = "dma_clk";
			status = "disabled";
		};

		/* Place dma2 here despite it's address */
		dma2: dma-controller@e1200000 {
			compatible = "microchip,sama7g5-dma";
			reg = <0xe1200000 0x1000>;
			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
			clock-names = "dma_clk";
			dma-requests = <0>;
			status = "disabled";
		};

		tcb0: timer@e2814000 {
			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0xe2814000 0x100>;
			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
		};

		flx8: flexcom@e2818000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe2818000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe2818000 0x800>;
			status = "disabled";

			i2c8: i2c@600 {
				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
				reg = <0x600 0x200>;
				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
				atmel,fifo-size = <32>;
				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
					<&dma0 AT91_XDMAC_DT_PERID(22)>;
				dma-names = "rx", "tx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};
		};

		flx9: flexcom@e281c000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe281c000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe281c000 0x800>;
			status = "disabled";

			i2c9: i2c@600 {
				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
				reg = <0x600 0x200>;
				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
				atmel,fifo-size = <32>;
				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
					<&dma0 AT91_XDMAC_DT_PERID(24)>;
				dma-names = "rx", "tx";
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};
		};

		flx11: flexcom@e2824000 {
			compatible = "atmel,sama5d2-flexcom";
			reg = <0xe2824000 0x200>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0xe2824000 0x800>;
			status = "disabled";

			spi11: spi@400 {
				compatible = "atmel,at91rm9200-spi";
				reg = <0x400 0x200>;
				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
				clock-names = "spi_clk";
				#address-cells = <1>;
				#size-cells = <0>;
				atmel,fifo-size = <32>;
				dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
					    <&dma0 AT91_XDMAC_DT_PERID(28)>;
				dma-names = "rx", "tx";
				status = "disabled";
			};
		};

		uddrc: uddrc@e3800000 {
			compatible = "microchip,sama7g5-uddrc";
			reg = <0xe3800000 0x4000>;
			status = "okay";
		};

		ddr3phy: ddr3phy@e3804000 {
			compatible = "microchip,sama7g5-ddr3phy";
			reg = <0xe3804000 0x1000>;
			status = "okay";
		};

		gic: interrupt-controller@e8c11000 {
			compatible = "arm,cortex-a7-gic";
			#interrupt-cells = <3>;
			#address-cells = <0>;
			interrupt-controller;
			interrupt-parent;
			reg = <0xe8c11000 0x1000>,
				<0xe8c12000 0x2000>;
		};
	};
};