blob: 46c5383f0eee220d757cdce4a7bcae0bf3e5aa33 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*
* Common PRUSS data for TI AM57xx platforms
*/
&ocp {
pruss1_tm: target-module@4b226000 {
compatible = "ti,sysc-pruss", "ti,sysc";
reg = <0x4b226000 0x4>,
<0x4b226004 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
SYSC_PRUSS_SUB_MWAIT)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x4b200000 0x80000>;
pruss1: pruss@0 {
compatible = "ti,am5728-pruss";
reg = <0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pruss1_mem: memories@0 {
reg = <0x0 0x2000>,
<0x2000 0x2000>,
<0x10000 0x8000>;
reg-names = "dram0", "dram1",
"shrdram2";
};
pruss1_cfg: cfg@26000 {
compatible = "ti,pruss-cfg", "syscon";
reg = <0x26000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x26000 0x2000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
pruss1_iepclk_mux: iepclk-mux@30 {
reg = <0x30>;
#clock-cells = <0>;
clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
<&dpll_gmac_h13x2_ck>; /* icss_clk */
};
};
};
pruss1_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x58>;
};
pruss1_intc: interrupt-controller@20000 {
compatible = "ti,pruss-intc";
reg = <0x20000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host_intr0", "host_intr1",
"host_intr2", "host_intr3",
"host_intr4", "host_intr5",
"host_intr6", "host_intr7";
};
pru1_0: pru@34000 {
compatible = "ti,am5728-pru";
reg = <0x34000 0x3000>,
<0x22000 0x400>,
<0x22400 0x100>;
reg-names = "iram", "control", "debug";
firmware-name = "am57xx-pru1_0-fw";
};
pru1_1: pru@38000 {
compatible = "ti,am5728-pru";
reg = <0x38000 0x3000>,
<0x24000 0x400>,
<0x24400 0x100>;
reg-names = "iram", "control", "debug";
firmware-name = "am57xx-pru1_1-fw";
};
pruss1_mdio: mdio@32400 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&dpll_gmac_h13x2_ck>;
clock-names = "fck";
bus_freq = <1000000>;
reg = <0x32400 0x90>;
};
};
};
pruss2_tm: target-module@4b2a6000 {
compatible = "ti,sysc-pruss", "ti,sysc";
reg = <0x4b2a6000 0x4>,
<0x4b2a6004 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
SYSC_PRUSS_SUB_MWAIT)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x4b280000 0x80000>;
pruss2: pruss@0 {
compatible = "ti,am5728-pruss";
reg = <0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pruss2_mem: memories@0 {
reg = <0x0 0x2000>,
<0x2000 0x2000>,
<0x10000 0x8000>;
reg-names = "dram0", "dram1",
"shrdram2";
};
pruss2_cfg: cfg@26000 {
compatible = "ti,pruss-cfg", "syscon";
reg = <0x26000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x26000 0x2000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
pruss2_iepclk_mux: iepclk-mux@30 {
reg = <0x30>;
#clock-cells = <0>;
clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
<&dpll_gmac_h13x2_ck>; /* icss_clk */
};
};
};
pruss2_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x58>;
};
pruss2_intc: interrupt-controller@20000 {
compatible = "ti,pruss-intc";
reg = <0x20000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host_intr0", "host_intr1",
"host_intr2", "host_intr3",
"host_intr4", "host_intr5",
"host_intr6", "host_intr7";
};
pru2_0: pru@34000 {
compatible = "ti,am5728-pru";
reg = <0x34000 0x3000>,
<0x22000 0x400>,
<0x22400 0x100>;
reg-names = "iram", "control", "debug";
firmware-name = "am57xx-pru2_0-fw";
};
pru2_1: pru@38000 {
compatible = "ti,am5728-pru";
reg = <0x38000 0x3000>,
<0x24000 0x400>,
<0x24400 0x100>;
reg-names = "iram", "control", "debug";
firmware-name = "am57xx-pru2_1-fw";
};
pruss2_mdio: mdio@32400 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&dpll_gmac_h13x2_ck>;
clock-names = "fck";
bus_freq = <1000000>;
reg = <0x32400 0x90>;
};
};
};
};