blob: 1b9b9a8145a73d4b8ed9dccd5e12a72f188575a3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017-2018 MediaTek Inc.
* Author: Sean Wang <sean.wang@mediatek.com>
*
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "mt7623n.dtsi"
#include "mt6323.dtsi"
/ {
model = "MediaTek MT7623N with eMMC reference board";
compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:115200n8";
};
connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "d";
ddc-i2c-bus = <&hdmiddc0>;
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi0_out>;
};
};
};
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
};
cpu@1 {
proc-supply = <&mt6323_vproc_reg>;
};
cpu@2 {
proc-supply = <&mt6323_vproc_reg>;
};
cpu@3 {
proc-supply = <&mt6323_vproc_reg>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
};
};
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
sound {
compatible = "mediatek,mt2701-wm8960-machine";
mediatek,platform = <&afe>;
audio-routing =
"Headphone", "HP_L",
"Headphone", "HP_R",
"LINPUT1", "AMIC",
"RINPUT1", "AMIC";
mediatek,audio-codec = <&wm8960>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_pins_a>;
};
};
&bls {
status = "okay";
};
&btif {
status = "okay";
};
&cec {
status = "okay";
};
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
status = "okay";
};
&crypto {
status = "okay";
};
&dpi0 {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpi0_out: endpoint {
remote-endpoint = <&hdmi0_in>;
};
};
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii-rxid";
};
switch@0 {
compatible = "mediatek,mt7530";
reg = <0>;
reset-gpios = <&pio 33 0>;
core-supply = <&mt6323_vpa_reg>;
io-supply = <&mt6323_vemc3v3_reg>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "wan";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
};
&hdmi0 {
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins_a>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hdmi0_in: endpoint {
remote-endpoint = <&dpi0_out>;
};
};
port@1 {
reg = <1>;
hdmi0_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
&hdmiddc0 {
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ddc_pins_a>;
status = "okay";
};
&hdmi_phy {
mediatek,ibias = <0xa>;
mediatek,ibias_up = <0x1c>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_b>;
status = "okay";
wm8960: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
status = "okay";
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
non-removable;
};
&mmc1 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_uhs>;
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_default>;
status = "okay";
pcie@0,0 {
status = "okay";
};
pcie@1,0 {
status = "okay";
};
};
&pcie0_phy {
status = "okay";
};
&pcie1_phy {
status = "okay";
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins_a>;
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>;
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins_a>;
status = "okay";
};
&usb1 {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&u3phy1 {
status = "okay";
};