blob: ea15b645b22995deabe0dbc528edfe76378e6887 [file] [log] [blame]
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Fairphone 2";
compatible = "fairphone,fp2", "qcom,msm8974";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
wakeup-source;
debounce-interval = <15>;
};
volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
wakeup-source;
debounce-interval = <15>;
};
volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
debounce-interval = <15>;
};
};
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};
smd {
rpm {
rpm_requests {
pm8841-regulators {
s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
};
s2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
s3 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
};
pm8941-regulators {
vdd_l1_l3-supply = <&pm8941_s1>;
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
vdd_l4_l11-supply = <&pm8941_s1>;
vdd_l5_l7-supply = <&pm8941_s2>;
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
vdd_l21-supply = <&vreg_boost>;
s1 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
s2 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
regulator-boot-on;
};
s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
regulator-always-on;
regulator-boot-on;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l3 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l11 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1350000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l19 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3350000>;
};
l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
regulator-system-load = <200000>;
regulator-allow-set-load;
};
l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
l23 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
regulator-boot-on;
};
};
};
};
};
};
&soc {
serial@f991e000 {
status = "okay";
};
remoteproc@fb21b000 {
status = "okay";
vddmx-supply = <&pm8841_s1>;
vddcx-supply = <&pm8841_s2>;
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
smd-edge {
qcom,remote-pid = <4>;
label = "pronto";
wcnss {
status = "okay";
};
};
};
pinctrl@fd510000 {
sdhc1_pin_a: sdhc1-pin-active {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc2_pin_a: sdhc2-pin-active {
clk {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
};
wcnss_pin_a: wcnss-pin-active {
wlan {
pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
function = "wlan";
drive-strength = <6>;
bias-pull-down;
};
bt {
pins = "gpio35", "gpio43", "gpio44";
function = "bt";
drive-strength = <2>;
bias-pull-down;
};
fm {
pins = "gpio41", "gpio42";
function = "fm";
drive-strength = <2>;
bias-pull-down;
};
};
};
sdhci@f9824900 {
status = "okay";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
bus-width = <8>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_pin_a>;
};
sdhci@f98a4900 {
status = "okay";
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_pin_a>;
};
usb@f9a55000 {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
imem@fe805000 {
status = "okay";
reboot-mode {
mode-normal = <0x77665501>;
mode-bootloader = <0x77665500>;
mode-recovery = <0x77665502>;
};
};
};
&spmi_bus {
pm8941@0 {
gpios@c000 {
gpio_keys_pin_a: gpio-keys-active {
pins = "gpio1", "gpio2", "gpio5";
function = "normal";
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
};
};
};