| // SPDX-License-Identifier: GPL-2.0 |
| |
| /dts-v1/; |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "s5pv210-aries.dtsi" |
| |
| / { |
| model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; |
| compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; |
| |
| chosen { |
| stdout-path = &uart2; |
| }; |
| |
| nand_pwrseq: nand-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&massmemory_en>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| power { |
| label = "power"; |
| gpios = <&gph2 6 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_POWER>; |
| wakeup-source; |
| }; |
| |
| vol-down { |
| label = "volume_down"; |
| gpios = <&gph3 1 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| vol-up { |
| label = "volume_up"; |
| gpios = <&gph3 2 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| |
| home { |
| label = "home"; |
| gpios = <&gph3 5 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_HOME>; |
| wakeup-source; |
| }; |
| }; |
| |
| i2c_fmradio: i2c-gpio-8 { |
| compatible = "i2c-gpio"; |
| sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| i2c-gpio,delay-us = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&fm_i2c_pins>; |
| |
| fmradio@10 { |
| compatible = "silabs,si470x"; |
| reg = <0x10>; |
| interrupt-parent = <&gpj2>; |
| interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&fm_irq &fm_rst>; |
| }; |
| }; |
| |
| micbias_reg: regulator-fixed-3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "MICBIAS"; |
| gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&micbias_reg_ena>; |
| }; |
| |
| sound { |
| compatible = "samsung,aries-wm8994"; |
| |
| model = "Aries"; |
| |
| extcon = <&fsa9480>; |
| |
| main-micbias-supply = <&micbias_reg>; |
| headset-micbias-supply = <&micbias_reg>; |
| |
| earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>; |
| |
| io-channels = <&adc 3>; |
| io-channel-names = "headset-detect"; |
| headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>; |
| headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; |
| |
| samsung,audio-routing = |
| "HP", "HPOUT1L", |
| "HP", "HPOUT1R", |
| |
| "SPK", "SPKOUTLN", |
| "SPK", "SPKOUTLP", |
| |
| "RCV", "HPOUT2N", |
| "RCV", "HPOUT2P", |
| |
| "LINE", "LINEOUT2N", |
| "LINE", "LINEOUT2P", |
| |
| "IN1LP", "Main Mic", |
| "IN1LN", "Main Mic", |
| |
| "IN1RP", "Headset Mic", |
| "IN1RN", "Headset Mic", |
| |
| "IN2LN", "FM In", |
| "IN2RN", "FM In", |
| |
| "Modem Out", "Modem TX", |
| "Modem RX", "Modem In", |
| |
| "Bluetooth SPK", "TX", |
| "RX", "Bluetooth Mic"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&headset_det &earpath_sel>; |
| |
| cpu { |
| sound-dai = <&i2s0>, <&bt_codec>; |
| }; |
| |
| codec { |
| sound-dai = <&wm8994>; |
| }; |
| }; |
| }; |
| |
| &aliases { |
| i2c8 = &i2c_fmradio; |
| }; |
| |
| &pinctrl0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sleep_cfg>; |
| |
| fm_i2c_pins: fm-i2c-pins { |
| samsung,pins = "gpd1-2", "gpd1-3"; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| }; |
| |
| headset_det: headset-det { |
| samsung,pins = "gph0-6", "gph3-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| }; |
| |
| fm_irq: fm-irq { |
| samsung,pins = "gpj2-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| }; |
| |
| fm_rst: fm-rst { |
| samsung,pins = "gpj2-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| }; |
| |
| earpath_sel: earpath-sel { |
| samsung,pins = "gpj2-6"; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| }; |
| |
| massmemory_en: massmemory-en { |
| samsung,pins = "gpj2-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| }; |
| |
| micbias_reg_ena: micbias-reg-ena { |
| samsung,pins = "gpj4-2"; |
| samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| }; |
| |
| /* Based on CyanogenMod 3.0.101 kernel */ |
| sleep_cfg: sleep-cfg { |
| PIN_SLP(gpa0-0, PREV, NONE); |
| PIN_SLP(gpa0-1, PREV, NONE); |
| PIN_SLP(gpa0-2, PREV, NONE); |
| PIN_SLP(gpa0-3, OUT1, NONE); |
| PIN_SLP(gpa0-4, INPUT, DOWN); |
| PIN_SLP(gpa0-5, OUT0, NONE); |
| PIN_SLP(gpa0-6, INPUT, DOWN); |
| PIN_SLP(gpa0-7, OUT1, NONE); |
| |
| PIN_SLP(gpa1-0, INPUT, DOWN); |
| PIN_SLP(gpa1-1, OUT0, NONE); |
| PIN_SLP(gpa1-2, INPUT, NONE); |
| PIN_SLP(gpa1-3, OUT0, NONE); |
| |
| PIN_SLP(gpb-0, OUT0, NONE); |
| PIN_SLP(gpb-1, OUT1, NONE); |
| PIN_SLP(gpb-2, OUT0, NONE); |
| PIN_SLP(gpb-3, PREV, NONE); |
| PIN_SLP(gpb-4, INPUT, NONE); |
| PIN_SLP(gpb-5, PREV, NONE); |
| PIN_SLP(gpb-6, INPUT, DOWN); |
| PIN_SLP(gpb-7, OUT0, NONE); |
| |
| PIN_SLP(gpc0-0, OUT0, NONE); |
| PIN_SLP(gpc0-1, INPUT, DOWN); |
| PIN_SLP(gpc0-2, OUT0, NONE); |
| PIN_SLP(gpc0-3, INPUT, NONE); |
| PIN_SLP(gpc0-4, OUT0, NONE); |
| |
| PIN_SLP(gpc1-0, INPUT, DOWN); |
| PIN_SLP(gpc1-1, INPUT, DOWN); |
| PIN_SLP(gpc1-2, INPUT, DOWN); |
| PIN_SLP(gpc1-3, INPUT, DOWN); |
| PIN_SLP(gpc1-4, INPUT, DOWN); |
| |
| PIN_SLP(gpd0-0, INPUT, DOWN); |
| PIN_SLP(gpd0-1, OUT0, NONE); |
| PIN_SLP(gpd0-2, INPUT, DOWN); |
| PIN_SLP(gpd0-3, INPUT, DOWN); |
| |
| PIN_SLP(gpd1-0, INPUT, NONE); |
| PIN_SLP(gpd1-1, INPUT, NONE); |
| PIN_SLP(gpd1-2, INPUT, NONE); |
| PIN_SLP(gpd1-3, INPUT, NONE); |
| PIN_SLP(gpd1-4, INPUT, DOWN); |
| PIN_SLP(gpd1-5, INPUT, DOWN); |
| |
| PIN_SLP(gpe0-0, INPUT, DOWN); |
| PIN_SLP(gpe0-1, INPUT, DOWN); |
| PIN_SLP(gpe0-2, INPUT, DOWN); |
| PIN_SLP(gpe0-3, INPUT, DOWN); |
| PIN_SLP(gpe0-4, INPUT, DOWN); |
| PIN_SLP(gpe0-5, INPUT, DOWN); |
| PIN_SLP(gpe0-6, INPUT, DOWN); |
| PIN_SLP(gpe0-7, INPUT, DOWN); |
| |
| PIN_SLP(gpe1-0, INPUT, DOWN); |
| PIN_SLP(gpe1-1, INPUT, DOWN); |
| PIN_SLP(gpe1-2, INPUT, DOWN); |
| PIN_SLP(gpe1-3, OUT0, NONE); |
| PIN_SLP(gpe1-4, INPUT, DOWN); |
| |
| PIN_SLP(gpf0-0, OUT0, NONE); |
| PIN_SLP(gpf0-1, OUT0, NONE); |
| PIN_SLP(gpf0-2, OUT0, NONE); |
| PIN_SLP(gpf0-3, OUT0, NONE); |
| PIN_SLP(gpf0-4, OUT0, NONE); |
| PIN_SLP(gpf0-5, OUT0, NONE); |
| PIN_SLP(gpf0-6, OUT0, NONE); |
| PIN_SLP(gpf0-7, OUT0, NONE); |
| |
| PIN_SLP(gpf1-0, OUT0, NONE); |
| PIN_SLP(gpf1-1, OUT0, NONE); |
| PIN_SLP(gpf1-2, OUT0, NONE); |
| PIN_SLP(gpf1-3, OUT0, NONE); |
| PIN_SLP(gpf1-4, OUT0, NONE); |
| PIN_SLP(gpf1-5, OUT0, NONE); |
| PIN_SLP(gpf1-6, OUT0, NONE); |
| PIN_SLP(gpf1-7, OUT0, NONE); |
| |
| PIN_SLP(gpf2-0, OUT0, NONE); |
| PIN_SLP(gpf2-1, OUT0, NONE); |
| PIN_SLP(gpf2-2, OUT0, NONE); |
| PIN_SLP(gpf2-3, OUT0, NONE); |
| PIN_SLP(gpf2-4, OUT0, NONE); |
| PIN_SLP(gpf2-5, OUT0, NONE); |
| PIN_SLP(gpf2-6, OUT0, NONE); |
| PIN_SLP(gpf2-7, OUT0, NONE); |
| |
| PIN_SLP(gpf3-0, OUT0, NONE); |
| PIN_SLP(gpf3-1, OUT0, NONE); |
| PIN_SLP(gpf3-2, OUT0, NONE); |
| PIN_SLP(gpf3-3, OUT0, NONE); |
| PIN_SLP(gpf3-4, PREV, NONE); |
| PIN_SLP(gpf3-5, INPUT, DOWN); |
| |
| PIN_SLP(gpg0-0, OUT0, NONE); |
| PIN_SLP(gpg0-1, INPUT, NONE); |
| PIN_SLP(gpg0-2, INPUT, NONE); |
| PIN_SLP(gpg0-3, INPUT, NONE); |
| PIN_SLP(gpg0-4, INPUT, NONE); |
| PIN_SLP(gpg0-5, INPUT, NONE); |
| PIN_SLP(gpg0-6, INPUT, NONE); |
| |
| PIN_SLP(gpg1-0, OUT0, NONE); |
| PIN_SLP(gpg1-1, OUT1, NONE); |
| PIN_SLP(gpg1-2, PREV, NONE); |
| PIN_SLP(gpg1-3, OUT1, NONE); |
| PIN_SLP(gpg1-4, OUT1, NONE); |
| PIN_SLP(gpg1-5, OUT1, NONE); |
| PIN_SLP(gpg1-6, OUT1, NONE); |
| |
| PIN_SLP(gpg2-0, OUT0, NONE); |
| PIN_SLP(gpg2-1, OUT0, NONE); |
| PIN_SLP(gpg2-2, INPUT, NONE); |
| PIN_SLP(gpg2-3, OUT0, NONE); |
| PIN_SLP(gpg2-4, OUT0, NONE); |
| PIN_SLP(gpg2-5, OUT0, NONE); |
| PIN_SLP(gpg2-6, OUT0, NONE); |
| |
| PIN_SLP(gpg3-0, OUT1, NONE); |
| PIN_SLP(gpg3-1, OUT0, NONE); |
| PIN_SLP(gpg3-2, INPUT, NONE); |
| PIN_SLP(gpg3-3, INPUT, DOWN); |
| PIN_SLP(gpg3-4, OUT0, NONE); |
| PIN_SLP(gpg3-5, OUT0, NONE); |
| PIN_SLP(gpg3-6, INPUT, DOWN); |
| |
| PIN_SLP(gpi-0, PREV, NONE); |
| PIN_SLP(gpi-1, INPUT, DOWN); |
| PIN_SLP(gpi-2, PREV, NONE); |
| PIN_SLP(gpi-3, PREV, NONE); |
| PIN_SLP(gpi-4, PREV, NONE); |
| PIN_SLP(gpi-5, INPUT, DOWN); |
| PIN_SLP(gpi-6, INPUT, DOWN); |
| |
| PIN_SLP(gpj0-0, INPUT, NONE); |
| PIN_SLP(gpj0-1, INPUT, NONE); |
| PIN_SLP(gpj0-2, INPUT, NONE); |
| PIN_SLP(gpj0-3, INPUT, NONE); |
| PIN_SLP(gpj0-4, INPUT, NONE); |
| PIN_SLP(gpj0-5, INPUT, DOWN); |
| PIN_SLP(gpj0-6, OUT0, NONE); |
| PIN_SLP(gpj0-7, INPUT, NONE); |
| |
| PIN_SLP(gpj1-0, INPUT, DOWN); |
| PIN_SLP(gpj1-1, OUT0, NONE); |
| PIN_SLP(gpj1-2, INPUT, DOWN); |
| PIN_SLP(gpj1-3, PREV, NONE); |
| PIN_SLP(gpj1-4, PREV, NONE); |
| PIN_SLP(gpj1-5, OUT0, NONE); |
| |
| PIN_SLP(gpj2-0, INPUT, DOWN); |
| PIN_SLP(gpj2-1, INPUT, DOWN); |
| PIN_SLP(gpj2-2, OUT0, NONE); |
| PIN_SLP(gpj2-3, INPUT, DOWN); |
| PIN_SLP(gpj2-4, INPUT, UP); |
| PIN_SLP(gpj2-5, PREV, NONE); |
| PIN_SLP(gpj2-6, PREV, NONE); |
| PIN_SLP(gpj2-7, OUT1, NONE); |
| |
| PIN_SLP(gpj3-0, INPUT, NONE); |
| PIN_SLP(gpj3-1, INPUT, NONE); |
| PIN_SLP(gpj3-2, OUT0, NONE); |
| PIN_SLP(gpj3-3, INPUT, DOWN); |
| PIN_SLP(gpj3-4, INPUT, NONE); |
| PIN_SLP(gpj3-5, INPUT, NONE); |
| PIN_SLP(gpj3-6, INPUT, NONE); |
| PIN_SLP(gpj3-7, INPUT, NONE); |
| |
| PIN_SLP(gpj4-0, INPUT, NONE); |
| PIN_SLP(gpj4-1, INPUT, DOWN); |
| PIN_SLP(gpj4-2, PREV, NONE); |
| PIN_SLP(gpj4-3, INPUT, NONE); |
| PIN_SLP(gpj4-4, INPUT, DOWN); |
| |
| PIN_SLP(mp01-0, INPUT, DOWN); |
| PIN_SLP(mp01-1, OUT0, NONE); |
| PIN_SLP(mp01-2, INPUT, DOWN); |
| PIN_SLP(mp01-3, INPUT, DOWN); |
| PIN_SLP(mp01-4, OUT1, NONE); |
| PIN_SLP(mp01-5, INPUT, DOWN); |
| PIN_SLP(mp01-6, INPUT, DOWN); |
| PIN_SLP(mp01-7, INPUT, DOWN); |
| |
| PIN_SLP(mp02-0, INPUT, DOWN); |
| PIN_SLP(mp02-1, INPUT, DOWN); |
| PIN_SLP(mp02-2, INPUT, NONE); |
| PIN_SLP(mp02-3, INPUT, DOWN); |
| |
| PIN_SLP(mp03-0, INPUT, DOWN); |
| PIN_SLP(mp03-1, INPUT, DOWN); |
| PIN_SLP(mp03-2, OUT1, NONE); |
| PIN_SLP(mp03-3, OUT0, NONE); |
| PIN_SLP(mp03-4, INPUT, NONE); |
| PIN_SLP(mp03-5, OUT1, NONE); |
| PIN_SLP(mp03-6, INPUT, DOWN); |
| PIN_SLP(mp03-7, INPUT, DOWN); |
| |
| PIN_SLP(mp04-0, INPUT, DOWN); |
| PIN_SLP(mp04-1, OUT0, NONE); |
| PIN_SLP(mp04-2, INPUT, DOWN); |
| PIN_SLP(mp04-3, OUT0, NONE); |
| PIN_SLP(mp04-4, INPUT, DOWN); |
| PIN_SLP(mp04-5, INPUT, DOWN); |
| PIN_SLP(mp04-6, OUT0, NONE); |
| PIN_SLP(mp04-7, INPUT, DOWN); |
| |
| PIN_SLP(mp05-0, INPUT, NONE); |
| PIN_SLP(mp05-1, INPUT, NONE); |
| PIN_SLP(mp05-2, INPUT, NONE); |
| PIN_SLP(mp05-3, INPUT, NONE); |
| PIN_SLP(mp05-4, INPUT, DOWN); |
| PIN_SLP(mp05-5, OUT0, NONE); |
| PIN_SLP(mp05-6, INPUT, DOWN); |
| PIN_SLP(mp05-7, PREV, NONE); |
| |
| PIN_SLP(mp06-0, INPUT, DOWN); |
| PIN_SLP(mp06-1, INPUT, DOWN); |
| PIN_SLP(mp06-2, INPUT, DOWN); |
| PIN_SLP(mp06-3, INPUT, DOWN); |
| PIN_SLP(mp06-4, INPUT, DOWN); |
| PIN_SLP(mp06-5, INPUT, DOWN); |
| PIN_SLP(mp06-6, INPUT, DOWN); |
| PIN_SLP(mp06-7, INPUT, DOWN); |
| |
| PIN_SLP(mp07-0, INPUT, DOWN); |
| PIN_SLP(mp07-1, INPUT, DOWN); |
| PIN_SLP(mp07-2, INPUT, DOWN); |
| PIN_SLP(mp07-3, INPUT, DOWN); |
| PIN_SLP(mp07-4, INPUT, DOWN); |
| PIN_SLP(mp07-5, INPUT, DOWN); |
| PIN_SLP(mp07-6, INPUT, DOWN); |
| PIN_SLP(mp07-7, INPUT, DOWN); |
| }; |
| }; |
| |
| &sdhci0 { |
| bus-width = <4>; |
| non-removable; |
| mmc-pwrseq = <&nand_pwrseq>; |
| pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>; |
| assigned-clock-rates = <0>, <52000000>; |
| assigned-clock-parents = <&clocks MOUT_MPLL>; |
| }; |
