blob: 86345751bbf3a3d8a7e3af72684985833cf6734b [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* BLAKE2s digest algorithm, ARM scalar implementation
*
* Copyright 2020 Google LLC
*
* Author: Eric Biggers <ebiggers@google.com>
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
// Registers used to hold message words temporarily. There aren't
// enough ARM registers to hold the whole message block, so we have to
// load the words on-demand.
M_0 .req r12
M_1 .req r14
// The BLAKE2s initialization vector
.Lblake2s_IV:
.word 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A
.word 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19
.macro __ldrd a, b, src, offset
#if __LINUX_ARM_ARCH__ >= 6
ldrd \a, \b, [\src, #\offset]
#else
ldr \a, [\src, #\offset]
ldr \b, [\src, #\offset + 4]
#endif
.endm
.macro __strd a, b, dst, offset
#if __LINUX_ARM_ARCH__ >= 6
strd \a, \b, [\dst, #\offset]
#else
str \a, [\dst, #\offset]
str \b, [\dst, #\offset + 4]
#endif
.endm
.macro _le32_bswap a, tmp
#ifdef __ARMEB__
rev_l \a, \tmp
#endif
.endm
.macro _le32_bswap_8x a, b, c, d, e, f, g, h, tmp
_le32_bswap \a, \tmp
_le32_bswap \b, \tmp
_le32_bswap \c, \tmp
_le32_bswap \d, \tmp
_le32_bswap \e, \tmp
_le32_bswap \f, \tmp
_le32_bswap \g, \tmp
_le32_bswap \h, \tmp
.endm
// Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
// (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
// columns/diagonals. s0-s1 are the word offsets to the message words the first
// column/diagonal needs, and likewise s2-s3 for the second column/diagonal.
// M_0 and M_1 are free to use, and the message block can be found at sp + 32.
//
// Note that to save instructions, the rotations don't happen when the
// pseudocode says they should, but rather they are delayed until the values are
// used. See the comment above _blake2s_round().
.macro _blake2s_quarterround a0, b0, c0, d0, a1, b1, c1, d1, s0, s1, s2, s3
ldr M_0, [sp, #32 + 4 * \s0]
ldr M_1, [sp, #32 + 4 * \s2]
// a += b + m[blake2s_sigma[r][2*i + 0]];
add \a0, \a0, \b0, ror #brot
add \a1, \a1, \b1, ror #brot
add \a0, \a0, M_0
add \a1, \a1, M_1
// d = ror32(d ^ a, 16);
eor \d0, \a0, \d0, ror #drot
eor \d1, \a1, \d1, ror #drot
// c += d;
add \c0, \c0, \d0, ror #16
add \c1, \c1, \d1, ror #16
// b = ror32(b ^ c, 12);
eor \b0, \c0, \b0, ror #brot
eor \b1, \c1, \b1, ror #brot
ldr M_0, [sp, #32 + 4 * \s1]
ldr M_1, [sp, #32 + 4 * \s3]
// a += b + m[blake2s_sigma[r][2*i + 1]];
add \a0, \a0, \b0, ror #12
add \a1, \a1, \b1, ror #12
add \a0, \a0, M_0
add \a1, \a1, M_1
// d = ror32(d ^ a, 8);
eor \d0, \a0, \d0, ror#16
eor \d1, \a1, \d1, ror#16
// c += d;
add \c0, \c0, \d0, ror#8
add \c1, \c1, \d1, ror#8
// b = ror32(b ^ c, 7);
eor \b0, \c0, \b0, ror#12
eor \b1, \c1, \b1, ror#12
.endm
// Execute one round of BLAKE2s by updating the state matrix v[0..15]. v[0..9]
// are in r0..r9. The stack pointer points to 8 bytes of scratch space for
// spilling v[8..9], then to v[9..15], then to the message block. r10-r12 and
// r14 are free to use. The macro arguments s0-s15 give the order in which the
// message words are used in this round.
//
// All rotates are performed using the implicit rotate operand accepted by the
// 'add' and 'eor' instructions. This is faster than using explicit rotate
// instructions. To make this work, we allow the values in the second and last
// rows of the BLAKE2s state matrix (rows 'b' and 'd') to temporarily have the
// wrong rotation amount. The rotation amount is then fixed up just in time
// when the values are used. 'brot' is the number of bits the values in row 'b'
// need to be rotated right to arrive at the correct values, and 'drot'
// similarly for row 'd'. (brot, drot) start out as (0, 0) but we make it such
// that they end up as (7, 8) after every round.
.macro _blake2s_round s0, s1, s2, s3, s4, s5, s6, s7, \
s8, s9, s10, s11, s12, s13, s14, s15
// Mix first two columns:
// (v[0], v[4], v[8], v[12]) and (v[1], v[5], v[9], v[13]).
__ldrd r10, r11, sp, 16 // load v[12] and v[13]
_blake2s_quarterround r0, r4, r8, r10, r1, r5, r9, r11, \
\s0, \s1, \s2, \s3
__strd r8, r9, sp, 0
__strd r10, r11, sp, 16
// Mix second two columns:
// (v[2], v[6], v[10], v[14]) and (v[3], v[7], v[11], v[15]).
__ldrd r8, r9, sp, 8 // load v[10] and v[11]
__ldrd r10, r11, sp, 24 // load v[14] and v[15]
_blake2s_quarterround r2, r6, r8, r10, r3, r7, r9, r11, \
\s4, \s5, \s6, \s7
str r10, [sp, #24] // store v[14]
// v[10], v[11], and v[15] are used below, so no need to store them yet.
.set brot, 7
.set drot, 8
// Mix first two diagonals:
// (v[0], v[5], v[10], v[15]) and (v[1], v[6], v[11], v[12]).
ldr r10, [sp, #16] // load v[12]
_blake2s_quarterround r0, r5, r8, r11, r1, r6, r9, r10, \
\s8, \s9, \s10, \s11
__strd r8, r9, sp, 8
str r11, [sp, #28]
str r10, [sp, #16]
// Mix second two diagonals:
// (v[2], v[7], v[8], v[13]) and (v[3], v[4], v[9], v[14]).
__ldrd r8, r9, sp, 0 // load v[8] and v[9]
__ldrd r10, r11, sp, 20 // load v[13] and v[14]
_blake2s_quarterround r2, r7, r8, r10, r3, r4, r9, r11, \
\s12, \s13, \s14, \s15
__strd r10, r11, sp, 20
.endm
//
// void blake2s_compress_arch(struct blake2s_state *state,
// const u8 *block, size_t nblocks, u32 inc);
//
// Only the first three fields of struct blake2s_state are used:
// u32 h[8]; (inout)
// u32 t[2]; (inout)
// u32 f[2]; (in)
//
.align 5
ENTRY(blake2s_compress_arch)
push {r0-r2,r4-r11,lr} // keep this an even number
.Lnext_block:
// r0 is 'state'
// r1 is 'block'
// r3 is 'inc'
// Load and increment the counter t[0..1].
__ldrd r10, r11, r0, 32
adds r10, r10, r3
adc r11, r11, #0
__strd r10, r11, r0, 32
// _blake2s_round is very short on registers, so copy the message block
// to the stack to save a register during the rounds. This also has the
// advantage that misalignment only needs to be dealt with in one place.
sub sp, sp, #64
mov r12, sp
tst r1, #3
bne .Lcopy_block_misaligned
ldmia r1!, {r2-r9}
_le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14
stmia r12!, {r2-r9}
ldmia r1!, {r2-r9}
_le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14
stmia r12, {r2-r9}
.Lcopy_block_done:
str r1, [sp, #68] // Update message pointer
// Calculate v[8..15]. Push v[9..15] onto the stack, and leave space
// for spilling v[8..9]. Leave v[8..9] in r8-r9.
mov r14, r0 // r14 = state
adr r12, .Lblake2s_IV
ldmia r12!, {r8-r9} // load IV[0..1]
__ldrd r0, r1, r14, 40 // load f[0..1]
ldm r12, {r2-r7} // load IV[3..7]
eor r4, r4, r10 // v[12] = IV[4] ^ t[0]
eor r5, r5, r11 // v[13] = IV[5] ^ t[1]
eor r6, r6, r0 // v[14] = IV[6] ^ f[0]
eor r7, r7, r1 // v[15] = IV[7] ^ f[1]
push {r2-r7} // push v[9..15]
sub sp, sp, #8 // leave space for v[8..9]
// Load h[0..7] == v[0..7].
ldm r14, {r0-r7}
// Execute the rounds. Each round is provided the order in which it
// needs to use the message words.
.set brot, 0
.set drot, 0
_blake2s_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
_blake2s_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3
_blake2s_round 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4
_blake2s_round 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8
_blake2s_round 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13
_blake2s_round 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9
_blake2s_round 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11
_blake2s_round 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10
_blake2s_round 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5
_blake2s_round 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0
// Fold the final state matrix into the hash chaining value:
//
// for (i = 0; i < 8; i++)
// h[i] ^= v[i] ^ v[i + 8];
//
ldr r14, [sp, #96] // r14 = &h[0]
add sp, sp, #8 // v[8..9] are already loaded.
pop {r10-r11} // load v[10..11]
eor r0, r0, r8
eor r1, r1, r9
eor r2, r2, r10
eor r3, r3, r11
ldm r14, {r8-r11} // load h[0..3]
eor r0, r0, r8
eor r1, r1, r9
eor r2, r2, r10
eor r3, r3, r11
stmia r14!, {r0-r3} // store new h[0..3]
ldm r14, {r0-r3} // load old h[4..7]
pop {r8-r11} // load v[12..15]
eor r0, r0, r4, ror #brot
eor r1, r1, r5, ror #brot
eor r2, r2, r6, ror #brot
eor r3, r3, r7, ror #brot
eor r0, r0, r8, ror #drot
eor r1, r1, r9, ror #drot
eor r2, r2, r10, ror #drot
eor r3, r3, r11, ror #drot
add sp, sp, #64 // skip copy of message block
stm r14, {r0-r3} // store new h[4..7]
// Advance to the next block, if there is one. Note that if there are
// multiple blocks, then 'inc' (the counter increment amount) must be
// 64. So we can simply set it to 64 without re-loading it.
ldm sp, {r0, r1, r2} // load (state, block, nblocks)
mov r3, #64 // set 'inc'
subs r2, r2, #1 // nblocks--
str r2, [sp, #8]
bne .Lnext_block // nblocks != 0?
pop {r0-r2,r4-r11,pc}
// The next message block (pointed to by r1) isn't 4-byte aligned, so it
// can't be loaded using ldmia. Copy it to the stack buffer (pointed to
// by r12) using an alternative method. r2-r9 are free to use.
.Lcopy_block_misaligned:
mov r2, #64
1:
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
ldr r3, [r1], #4
_le32_bswap r3, r4
#else
ldrb r3, [r1, #0]
ldrb r4, [r1, #1]
ldrb r5, [r1, #2]
ldrb r6, [r1, #3]
add r1, r1, #4
orr r3, r3, r4, lsl #8
orr r3, r3, r5, lsl #16
orr r3, r3, r6, lsl #24
#endif
subs r2, r2, #4
str r3, [r12], #4
bne 1b
b .Lcopy_block_done
ENDPROC(blake2s_compress_arch)