SPEAr: Add PL080 DMA support for 3xx and 6xx
Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA
controller. This patch adds in support for that.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 9293c14..eeafe38 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -701,7 +701,7 @@
/* clock derived from ahb clk */
CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
- CLKDEV_INIT("dma", NULL, &dma_clk),
+ CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 84ee2bb..a756958 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,6 +14,7 @@
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
+#include <linux/amba/pl08x.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
@@ -33,6 +34,7 @@
/* Add spear3xx family device structure declarations here */
extern struct sys_timer spear3xx_timer;
extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
/* Add spear3xx family function declarations here */
void __init spear_setup_timer(void);
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index c876c6a..f46fc26 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -13,6 +13,7 @@
#define pr_fmt(fmt) "SPEAr300: " fmt
+#include <linux/amba/pl08x.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
@@ -440,10 +441,199 @@
&spear300_pmx_gpio1,
};
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+ {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras0_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras0_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras1_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras1_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras2_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras2_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras3_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras3_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras4_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras4_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ },
+};
+
/* Add SPEAr300 auxdata to pass platform data */
static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
{}
};
@@ -451,6 +641,9 @@
{
int ret = -EINVAL;
+ pl080_plat_data.slave_channels = spear300_dma_info;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
+
of_platform_populate(NULL, of_default_bus_match_table,
spear300_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 641fd4c..063e7da 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -284,6 +284,193 @@
&spear310_pmx_tdm0,
};
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+ {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart3_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart3_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart4_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart4_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart5_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart5_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras5_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras6_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ras7_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ },
+};
+
/* uart devices plat data */
static struct amba_pl011_data spear310_uart_data[] = {
{
@@ -313,6 +500,8 @@
static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
&spear310_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
@@ -331,6 +520,9 @@
void __iomem *base;
int ret = 0;
+ pl080_plat_data.slave_channels = spear310_dma_info;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
of_platform_populate(NULL, of_default_bus_match_table,
spear310_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 9c571d0..1e74031 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -535,6 +535,193 @@
&spear320_pmx_mii1,
};
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+ {
+ .bus_id = "uart0_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "uart0_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp0_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c0_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "i2c0_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "adc",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "to_jpeg",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "from_jpeg",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 0,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB1,
+ }, {
+ .bus_id = "ssp1_rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp1_tx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp2_rx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ssp2_tx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c1_rx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c1_tx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c2_rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2c2_tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s_rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s_tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "rs485_rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "rs485_tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .cctl = 0,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
static struct pl022_ssp_controller spear320_ssp_data[] = {
{
.bus_id = 1,
@@ -569,6 +756,8 @@
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ &pl080_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
&spear320_ssp_data[0]),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
@@ -585,6 +774,9 @@
void __iomem *base;
int ret = 0;
+ pl080_plat_data.slave_channels = spear320_dma_info;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
of_platform_populate(NULL, of_default_bus_match_table,
spear320_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index a94d8c1..17d4ac9 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -17,7 +17,9 @@
#include <linux/amba/pl08x.h>
#include <linux/of_irq.h>
#include <linux/io.h>
+#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
+#include <plat/pl080.h>
#include <mach/generic.h>
#include <mach/hardware.h>
@@ -465,6 +467,23 @@
.num_chipselect = 2,
};
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_signal = pl080_get_signal,
+ .put_signal = pl080_put_signal,
+};
+
/*
* Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL
