/*
 * Copyright (C) 2003-2008 Takahiro Hirofuchi
 *
 * This is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
 * USA.
 */

#include <linux/slab.h>

#include "usbip_common.h"
#include "vhci.h"

#define DRIVER_VERSION "1.0"
#define DRIVER_AUTHOR "Takahiro Hirofuchi"
#define DRIVER_DESC "Virtual Host Controller Interface Driver for USB/IP"
#define DRIVER_LICENCE "GPL"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENCE);


/*
 * TODO
 *	- update root hub emulation
 *	- move the emulation code to userland ?
 *		porting to other operating systems
 *		minimize kernel code
 *	- add suspend/resume code
 *	- clean up everything
 */


/* See usb gadget dummy hcd */


static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
		u16 wIndex, char *buff, u16 wLength);
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
							gfp_t mem_flags);
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
static int vhci_start(struct usb_hcd *vhci_hcd);
static void vhci_stop(struct usb_hcd *hcd);
static int vhci_get_frame_number(struct usb_hcd *hcd);

static const char driver_name[] = "vhci_hcd";
static const char driver_desc[] = "USB/IP Virtual Host Controller";

struct vhci_hcd *the_controller;

static const char *bit_desc[] = {
	"CONNECTION",		/*0*/
	"ENABLE",		/*1*/
	"SUSPEND",		/*2*/
	"OVER_CURRENT",		/*3*/
	"RESET",		/*4*/
	"R5",		/*5*/
	"R6",		/*6*/
	"R7",		/*7*/
	"POWER",		/*8*/
	"LOWSPEED",		/*9*/
	"HIGHSPEED",		/*10*/
	"PORT_TEST",		/*11*/
	"INDICATOR",		/*12*/
	"R13",		/*13*/
	"R14",		/*14*/
	"R15",		/*15*/
	"C_CONNECTION",		/*16*/
	"C_ENABLE",		/*17*/
	"C_SUSPEND",		/*18*/
	"C_OVER_CURRENT",	/*19*/
	"C_RESET",		/*20*/
	"R21",		/*21*/
	"R22",		/*22*/
	"R23",		/*23*/
	"R24",		/*24*/
	"R25",		/*25*/
	"R26",		/*26*/
	"R27",		/*27*/
	"R28",		/*28*/
	"R29",		/*29*/
	"R30",		/*30*/
	"R31",		/*31*/
};


static void dump_port_status(u32 status)
{
	int i = 0;

	printk(KERN_DEBUG "status %08x:", status);
	for (i = 0; i < 32; i++) {
		if (status & (1 << i))
			printk(" %s", bit_desc[i]);
	}

	printk("\n");
}


void rh_port_connect(int rhport, enum usb_device_speed speed)
{
	unsigned long	flags;

	usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);

	spin_lock_irqsave(&the_controller->lock, flags);

	the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION
		| (1 << USB_PORT_FEAT_C_CONNECTION);

	switch (speed) {
	case USB_SPEED_HIGH:
		the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED;
		break;
	case USB_SPEED_LOW:
		the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED;
		break;
	default:
		break;
	}

	/* spin_lock(&the_controller->vdev[rhport].ud.lock);
	 * the_controller->vdev[rhport].ud.status = VDEV_CONNECT;
	 * spin_unlock(&the_controller->vdev[rhport].ud.lock); */

	the_controller->pending_port = rhport;

	spin_unlock_irqrestore(&the_controller->lock, flags);

	usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
}

void rh_port_disconnect(int rhport)
{
	unsigned long flags;

	usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);

	spin_lock_irqsave(&the_controller->lock, flags);
	/* stop_activity(dum, driver); */
	the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION;
	the_controller->port_status[rhport] |=
					(1 << USB_PORT_FEAT_C_CONNECTION);


	/* not yet complete the disconnection
	 * spin_lock(&vdev->ud.lock);
	 * vdev->ud.status = VHC_ST_DISCONNECT;
	 * spin_unlock(&vdev->ud.lock); */

	spin_unlock_irqrestore(&the_controller->lock, flags);
}


/*----------------------------------------------------------------------*/

#define PORT_C_MASK \
	((USB_PORT_STAT_C_CONNECTION \
	  | USB_PORT_STAT_C_ENABLE \
	  | USB_PORT_STAT_C_SUSPEND \
	  | USB_PORT_STAT_C_OVERCURRENT \
	  | USB_PORT_STAT_C_RESET) << 16)

/*
 * This function is almostly the same as dummy_hcd.c:dummy_hub_status() without
 * suspend/resume support. But, it is modified to provide multiple ports.
 *
 * @buf: a bitmap to show which port status has been changed.
 *  bit  0: reserved or used for another purpose?
 *  bit  1: the status of port 0 has been changed.
 *  bit  2: the status of port 1 has been changed.
 *  ...
 *  bit  7: the status of port 6 has been changed.
 *  bit  8: the status of port 7 has been changed.
 *  ...
 *  bit 15: the status of port 14 has been changed.
 *
 * So, the maximum number of ports is 31 ( port 0 to port 30) ?
 *
 * The return value is the actual transfered length in byte. If nothing has
 * been changed, return 0. In the case that the number of ports is less than or
 * equal to 6 (VHCI_NPORTS==7), return 1.
 *
 */
static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
{
	struct vhci_hcd	*vhci;
	unsigned long	flags;
	int		retval = 0;

	/* the enough buffer is allocated according to USB_MAXCHILDREN */
	unsigned long	*event_bits = (unsigned long *) buf;
	int		rhport;
	int		changed = 0;


	*event_bits = 0;

	vhci = hcd_to_vhci(hcd);

	spin_lock_irqsave(&vhci->lock, flags);
	if (!HCD_HW_ACCESSIBLE(hcd)) {
		usbip_dbg_vhci_rh("hw accessible flag in on?\n");
		goto done;
	}

	/* check pseudo status register for each port */
	for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
		if ((vhci->port_status[rhport] & PORT_C_MASK)) {
			/* The status of a port has been changed, */
			usbip_dbg_vhci_rh("port %d is changed\n", rhport);

			*event_bits |= 1 << (rhport + 1);
			changed = 1;
		}
	}

	usbip_uinfo("changed %d\n", changed);

	if (hcd->state == HC_STATE_SUSPENDED)
		usb_hcd_resume_root_hub(hcd);

	if (changed)
		retval = 1 + (VHCI_NPORTS / 8);
	else
		retval = 0;

done:
	spin_unlock_irqrestore(&vhci->lock, flags);
	return retval;
}

/* See hub_configure in hub.c */
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
	memset(desc, 0, sizeof(*desc));
	desc->bDescriptorType = 0x29;
	desc->bDescLength = 9;
	desc->wHubCharacteristics = (__force __u16)
		(__constant_cpu_to_le16(0x0001));
	desc->bNbrPorts = VHCI_NPORTS;
	desc->bitmap[0] = 0xff;
	desc->bitmap[1] = 0xff;
}

static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
			    u16 wIndex, char *buf, u16 wLength)
{
	struct vhci_hcd	*dum;
	int             retval = 0;
	unsigned long   flags;
	int		rhport;

	u32 prev_port_status[VHCI_NPORTS];

	if (!HCD_HW_ACCESSIBLE(hcd))
		return -ETIMEDOUT;

	/*
	 * NOTE:
	 * wIndex shows the port number and begins from 1.
	 */
	usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
								wIndex);
	if (wIndex > VHCI_NPORTS)
		printk(KERN_ERR "%s: invalid port number %d\n", __func__,
								wIndex);
	rhport = ((__u8)(wIndex & 0x00ff)) - 1;

	dum = hcd_to_vhci(hcd);

	spin_lock_irqsave(&dum->lock, flags);

	/* store old status and compare now and old later */
	if (usbip_dbg_flag_vhci_rh) {
		int i = 0;
		for (i = 0; i < VHCI_NPORTS; i++)
			prev_port_status[i] = dum->port_status[i];
	}

	switch (typeReq) {
	case ClearHubFeature:
		usbip_dbg_vhci_rh(" ClearHubFeature\n");
		break;
	case ClearPortFeature:
		switch (wValue) {
		case USB_PORT_FEAT_SUSPEND:
			if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
				/* 20msec signaling */
				dum->resuming = 1;
				dum->re_timeout =
					jiffies + msecs_to_jiffies(20);
			}
			break;
		case USB_PORT_FEAT_POWER:
			usbip_dbg_vhci_rh(" ClearPortFeature: "
						"USB_PORT_FEAT_POWER\n");
			dum->port_status[rhport] = 0;
			/* dum->address = 0; */
			/* dum->hdev = 0; */
			dum->resuming = 0;
			break;
		case USB_PORT_FEAT_C_RESET:
			usbip_dbg_vhci_rh(" ClearPortFeature: "
						"USB_PORT_FEAT_C_RESET\n");
			switch (dum->vdev[rhport].speed) {
			case USB_SPEED_HIGH:
				dum->port_status[rhport] |=
						USB_PORT_STAT_HIGH_SPEED;
				break;
			case USB_SPEED_LOW:
				dum->port_status[rhport] |=
						USB_PORT_STAT_LOW_SPEED;
				break;
			default:
				break;
			}
		default:
			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
								wValue);
			dum->port_status[rhport] &= ~(1 << wValue);
		}
		break;
	case GetHubDescriptor:
		usbip_dbg_vhci_rh(" GetHubDescriptor\n");
		hub_descriptor((struct usb_hub_descriptor *) buf);
		break;
	case GetHubStatus:
		usbip_dbg_vhci_rh(" GetHubStatus\n");
		*(__le32 *) buf = __constant_cpu_to_le32(0);
		break;
	case GetPortStatus:
		usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
		if (wIndex > VHCI_NPORTS || wIndex < 1) {
			printk(KERN_ERR "%s: invalid port number %d\n",
			       __func__, wIndex);
			retval = -EPIPE;
		}

		/* we do no care of resume. */

		/* whoever resets or resumes must GetPortStatus to
		 * complete it!!
		 *                                   */
		if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
			printk(KERN_ERR "%s: not yet\n", __func__);
			dum->port_status[rhport] |=
					(1 << USB_PORT_FEAT_C_SUSPEND);
			dum->port_status[rhport] &=
					~(1 << USB_PORT_FEAT_SUSPEND);
			dum->resuming = 0;
			dum->re_timeout = 0;
			/* if (dum->driver && dum->driver->resume) {
			 *	spin_unlock (&dum->lock);
			 *	dum->driver->resume (&dum->gadget);
			 *	spin_lock (&dum->lock);
			 * } */
		}

		if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
				0 && time_after(jiffies, dum->re_timeout)) {
			dum->port_status[rhport] |=
						(1 << USB_PORT_FEAT_C_RESET);
			dum->port_status[rhport] &=
						~(1 << USB_PORT_FEAT_RESET);
			dum->re_timeout = 0;

			if (dum->vdev[rhport].ud.status ==
							VDEV_ST_NOTASSIGNED) {
				usbip_dbg_vhci_rh(" enable rhport %d "
						"(status %u)\n",
						rhport,
						dum->vdev[rhport].ud.status);
				dum->port_status[rhport] |=
							USB_PORT_STAT_ENABLE;
			}
#if 0
			if (dum->driver) {

				dum->port_status[rhport] |=
							USB_PORT_STAT_ENABLE;
				/* give it the best speed we agree on */
				dum->gadget.speed = dum->driver->speed;
				dum->gadget.ep0->maxpacket = 64;
				switch (dum->gadget.speed) {
				case USB_SPEED_HIGH:
					dum->port_status[rhport] |=
					USB_PORT_STAT_HIGH_SPEED;
					break;
				case USB_SPEED_LOW:
					dum->gadget.ep0->maxpacket = 8;
					dum->port_status[rhport] |=
					USB_PORT_STAT_LOW_SPEED;
					break;
				default:
					dum->gadget.speed = USB_SPEED_FULL;
					break;
				}
			}
#endif

		}
		((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
		((u16 *) buf)[1] =
				cpu_to_le16(dum->port_status[rhport] >> 16);

		usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
							((u16 *)buf)[1]);
		break;
	case SetHubFeature:
		usbip_dbg_vhci_rh(" SetHubFeature\n");
		retval = -EPIPE;
		break;
	case SetPortFeature:
		switch (wValue) {
		case USB_PORT_FEAT_SUSPEND:
			usbip_dbg_vhci_rh(" SetPortFeature: "
					"USB_PORT_FEAT_SUSPEND\n");
			printk(KERN_ERR "%s: not yet\n", __func__);
#if 0
			dum->port_status[rhport] |=
						(1 << USB_PORT_FEAT_SUSPEND);
			if (dum->driver->suspend) {
				spin_unlock(&dum->lock);
				dum->driver->suspend(&dum->gadget);
				spin_lock(&dum->lock);
			}
#endif
			break;
		case USB_PORT_FEAT_RESET:
			usbip_dbg_vhci_rh(" SetPortFeature: "
						"USB_PORT_FEAT_RESET\n");
			/* if it's already running, disconnect first */
			if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
				dum->port_status[rhport] &=
						~(USB_PORT_STAT_ENABLE |
						  USB_PORT_STAT_LOW_SPEED |
						  USB_PORT_STAT_HIGH_SPEED);
#if 0
				if (dum->driver) {
					dev_dbg(hardware, "disconnect\n");
					stop_activity(dum, dum->driver);
				}
#endif

				/* FIXME test that code path! */
			}
			/* 50msec reset signaling */
			dum->re_timeout = jiffies + msecs_to_jiffies(50);

			/* FALLTHROUGH */
		default:
			usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
								wValue);
			dum->port_status[rhport] |= (1 << wValue);
		}
		break;

	default:
		printk(KERN_ERR "%s: default: no such request\n", __func__);
		/* dev_dbg (hardware,
		 *		"hub control req%04x v%04x i%04x l%d\n",
		 *		typeReq, wValue, wIndex, wLength); */

		/* "protocol stall" on error */
		retval = -EPIPE;
	}

	if (usbip_dbg_flag_vhci_rh) {
		printk(KERN_DEBUG "port %d\n", rhport);
		dump_port_status(prev_port_status[rhport]);
		dump_port_status(dum->port_status[rhport]);
	}
	usbip_dbg_vhci_rh(" bye\n");

	spin_unlock_irqrestore(&dum->lock, flags);

	return retval;
}


/*----------------------------------------------------------------------*/

static struct vhci_device *get_vdev(struct usb_device *udev)
{
	int i;

	if (!udev)
		return NULL;

	for (i = 0; i < VHCI_NPORTS; i++)
		if (the_controller->vdev[i].udev == udev)
			return port_to_vdev(i);

	return NULL;
}

static void vhci_tx_urb(struct urb *urb)
{
	struct vhci_device *vdev = get_vdev(urb->dev);
	struct vhci_priv *priv;
	unsigned long flag;

	if (!vdev) {
		err("could not get virtual device");
		/* BUG(); */
		return;
	}

	priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);

	spin_lock_irqsave(&vdev->priv_lock, flag);

	if (!priv) {
		dev_err(&urb->dev->dev, "malloc vhci_priv\n");
		spin_unlock_irqrestore(&vdev->priv_lock, flag);
		usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
		return;
	}

	priv->seqnum = atomic_inc_return(&the_controller->seqnum);
	if (priv->seqnum == 0xffff)
		usbip_uinfo("seqnum max\n");

	priv->vdev = vdev;
	priv->urb = urb;

	urb->hcpriv = (void *) priv;


	list_add_tail(&priv->list, &vdev->priv_tx);

	wake_up(&vdev->waitq_tx);
	spin_unlock_irqrestore(&vdev->priv_lock, flag);
}

static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
			    gfp_t mem_flags)
{
	struct device *dev = &urb->dev->dev;
	int ret = 0;
	unsigned long flags;

	usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
		    hcd, urb, mem_flags);

	/* patch to usb_sg_init() is in 2.5.60 */
	BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);

	spin_lock_irqsave(&the_controller->lock, flags);

	if (urb->status != -EINPROGRESS) {
		dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
		spin_unlock_irqrestore(&the_controller->lock, flags);
		return urb->status;
	}

	ret = usb_hcd_link_urb_to_ep(hcd, urb);
	if (ret)
		goto no_need_unlink;

	/*
	 * The enumeration process is as follows;
	 *
	 *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
	 *     to get max packet length of default pipe
	 *
	 *  2. Set_Address request to DevAddr(0) EndPoint(0)
	 *
	 */

	if (usb_pipedevice(urb->pipe) == 0) {
		__u8 type = usb_pipetype(urb->pipe);
		struct usb_ctrlrequest *ctrlreq =
				(struct usb_ctrlrequest *) urb->setup_packet;
		struct vhci_device *vdev =
				port_to_vdev(the_controller->pending_port);

		if (type != PIPE_CONTROL || !ctrlreq) {
			dev_err(dev, "invalid request to devnum 0\n");
			ret = -EINVAL;
			goto no_need_xmit;
		}

		switch (ctrlreq->bRequest) {
		case USB_REQ_SET_ADDRESS:
			/* set_address may come when a device is reset */
			dev_info(dev, "SetAddress Request (%d) to port %d\n",
				 ctrlreq->wValue, vdev->rhport);

			vdev->udev = urb->dev;

			spin_lock(&vdev->ud.lock);
			vdev->ud.status = VDEV_ST_USED;
			spin_unlock(&vdev->ud.lock);

			if (urb->status == -EINPROGRESS) {
				/* This request is successfully completed. */
				/* If not -EINPROGRESS, possibly unlinked. */
				urb->status = 0;
			}

			goto no_need_xmit;

		case USB_REQ_GET_DESCRIPTOR:
			if (ctrlreq->wValue == (USB_DT_DEVICE << 8))
				usbip_dbg_vhci_hc("Not yet?: "
						"Get_Descriptor to device 0 "
						"(get max pipe size)\n");

			/* FIXME: reference count? (usb_get_dev()) */
			vdev->udev = urb->dev;
			goto out;

		default:
			/* NOT REACHED */
			dev_err(dev, "invalid request to devnum 0 bRequest %u, "
				"wValue %u\n", ctrlreq->bRequest,
				ctrlreq->wValue);
			ret =  -EINVAL;
			goto no_need_xmit;
		}

	}

out:
	vhci_tx_urb(urb);

	spin_unlock_irqrestore(&the_controller->lock, flags);

	return 0;

no_need_xmit:
	usb_hcd_unlink_urb_from_ep(hcd, urb);
no_need_unlink:
	spin_unlock_irqrestore(&the_controller->lock, flags);

	usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);

	return ret;
}

/*
 * vhci_rx gives back the urb after receiving the reply of the urb.  If an
 * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
 * back its urb. For the driver unlinking the urb, the content of the urb is
 * not important, but the calling to its completion handler is important; the
 * completion of unlinking is notified by the completion handler.
 *
 *
 * CLIENT SIDE
 *
 * - When vhci_hcd receives RET_SUBMIT,
 *
 *	- case 1a). the urb of the pdu is not unlinking.
 *		- normal case
 *		=> just give back the urb
 *
 *	- case 1b). the urb of the pdu is unlinking.
 *		- usbip.ko will return a reply of the unlinking request.
 *		=> give back the urb now and go to case 2b).
 *
 * - When vhci_hcd receives RET_UNLINK,
 *
 *	- case 2a). a submit request is still pending in vhci_hcd.
 *		- urb was really pending in usbip.ko and urb_unlink_urb() was
 *		  completed there.
 *		=> free a pending submit request
 *		=> notify unlink completeness by giving back the urb
 *
 *	- case 2b). a submit request is *not* pending in vhci_hcd.
 *		- urb was already given back to the core driver.
 *		=> do not give back the urb
 *
 *
 * SERVER SIDE
 *
 * - When usbip receives CMD_UNLINK,
 *
 *	- case 3a). the urb of the unlink request is now in submission.
 *		=> do usb_unlink_urb().
 *		=> after the unlink is completed, send RET_UNLINK.
 *
 *	- case 3b). the urb of the unlink request is not in submission.
 *		- may be already completed or never be received
 *		=> send RET_UNLINK
 *
 */
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
	unsigned long flags;
	struct vhci_priv *priv;
	struct vhci_device *vdev;

	usbip_uinfo("vhci_hcd: dequeue a urb %p\n", urb);


	spin_lock_irqsave(&the_controller->lock, flags);

	priv = urb->hcpriv;
	if (!priv) {
		/* URB was never linked! or will be soon given back by
		 * vhci_rx. */
		spin_unlock_irqrestore(&the_controller->lock, flags);
		return 0;
	}

	{
		int ret = 0;
		ret = usb_hcd_check_unlink_urb(hcd, urb, status);
		if (ret) {
			spin_unlock_irqrestore(&the_controller->lock, flags);
			return ret;
		}
	}

	 /* send unlink request here? */
	vdev = priv->vdev;

	if (!vdev->ud.tcp_socket) {
		/* tcp connection is closed */
		unsigned long flags2;

		spin_lock_irqsave(&vdev->priv_lock, flags2);

		usbip_uinfo("vhci_hcd: device %p seems to be disconnected\n",
									vdev);
		list_del(&priv->list);
		kfree(priv);
		urb->hcpriv = NULL;

		spin_unlock_irqrestore(&vdev->priv_lock, flags2);

		/*
		 * If tcp connection is alive, we have sent CMD_UNLINK.
		 * vhci_rx will receive RET_UNLINK and give back the URB.
		 * Otherwise, we give back it here.
		 */
		usbip_uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n",
									urb);

		usb_hcd_unlink_urb_from_ep(hcd, urb);

		spin_unlock_irqrestore(&the_controller->lock, flags);
		usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
								urb->status);
		spin_lock_irqsave(&the_controller->lock, flags);

	} else {
		/* tcp connection is alive */
		unsigned long flags2;
		struct vhci_unlink *unlink;

		spin_lock_irqsave(&vdev->priv_lock, flags2);

		/* setup CMD_UNLINK pdu */
		unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
		if (!unlink) {
			usbip_uerr("malloc vhci_unlink\n");
			spin_unlock_irqrestore(&vdev->priv_lock, flags2);
			spin_unlock_irqrestore(&the_controller->lock, flags);
			usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
			return -ENOMEM;
		}

		unlink->seqnum = atomic_inc_return(&the_controller->seqnum);
		if (unlink->seqnum == 0xffff)
			usbip_uinfo("seqnum max\n");

		unlink->unlink_seqnum = priv->seqnum;

		usbip_uinfo("vhci_hcd: device %p seems to be still connected\n",
									vdev);

		/* send cmd_unlink and try to cancel the pending URB in the
		 * peer */
		list_add_tail(&unlink->list, &vdev->unlink_tx);
		wake_up(&vdev->waitq_tx);

		spin_unlock_irqrestore(&vdev->priv_lock, flags2);
	}


	if (!vdev->ud.tcp_socket) {
		/* tcp connection is closed */
		usbip_uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n",
									urb);

		usb_hcd_unlink_urb_from_ep(hcd, urb);

		spin_unlock_irqrestore(&the_controller->lock, flags);
		usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
								urb->status);
		spin_lock_irqsave(&the_controller->lock, flags);
	}

	spin_unlock_irqrestore(&the_controller->lock, flags);

	usbip_dbg_vhci_hc("leave\n");
	return 0;
}


static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
{
	struct vhci_unlink *unlink, *tmp;

	spin_lock(&vdev->priv_lock);

	list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
		list_del(&unlink->list);
		kfree(unlink);
	}

	list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
		list_del(&unlink->list);
		kfree(unlink);
	}

	spin_unlock(&vdev->priv_lock);
}

/*
 * The important thing is that only one context begins cleanup.
 * This is why error handling and cleanup become simple.
 * We do not want to consider race condition as possible.
 */
static void vhci_shutdown_connection(struct usbip_device *ud)
{
	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);

	/* need this? see stub_dev.c */
	if (ud->tcp_socket) {
		usbip_udbg("shutdown tcp_socket %p\n", ud->tcp_socket);
		kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
	}

	usbip_stop_threads(&vdev->ud);
	usbip_uinfo("stop threads\n");

	/* active connection is closed */
	if (vdev->ud.tcp_socket != NULL) {
		sock_release(vdev->ud.tcp_socket);
		vdev->ud.tcp_socket = NULL;
	}
	usbip_uinfo("release socket\n");

	vhci_device_unlink_cleanup(vdev);

	/*
	 * rh_port_disconnect() is a trigger of ...
	 *   usb_disable_device():
	 *	disable all the endpoints for a USB device.
	 *   usb_disable_endpoint():
	 *	disable endpoints. pending urbs are unlinked(dequeued).
	 *
	 * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
	 * deteched device should release used urbs in a cleanup function(i.e.
	 * xxx_disconnect()). Therefore, vhci_hcd does not need to release
	 * pushed urbs and their private data in this function.
	 *
	 * NOTE: vhci_dequeue() must be considered carefully. When shutdowning
	 * a connection, vhci_shutdown_connection() expects vhci_dequeue()
	 * gives back pushed urbs and frees their private data by request of
	 * the cleanup function of a USB driver. When unlinking a urb with an
	 * active connection, vhci_dequeue() does not give back the urb which
	 * is actually given back by vhci_rx after receiving its return pdu.
	 *
	 */
	rh_port_disconnect(vdev->rhport);

	usbip_uinfo("disconnect device\n");
}


static void vhci_device_reset(struct usbip_device *ud)
{
	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);

	spin_lock(&ud->lock);

	vdev->speed  = 0;
	vdev->devid  = 0;

	ud->tcp_socket = NULL;

	ud->status = VDEV_ST_NULL;

	spin_unlock(&ud->lock);
}

static void vhci_device_unusable(struct usbip_device *ud)
{
	spin_lock(&ud->lock);

	ud->status = VDEV_ST_ERROR;

	spin_unlock(&ud->lock);
}

static void vhci_device_init(struct vhci_device *vdev)
{
	memset(vdev, 0, sizeof(*vdev));

	usbip_task_init(&vdev->ud.tcp_rx, "vhci_rx", vhci_rx_loop);
	usbip_task_init(&vdev->ud.tcp_tx, "vhci_tx", vhci_tx_loop);

	vdev->ud.side   = USBIP_VHCI;
	vdev->ud.status = VDEV_ST_NULL;
	/* vdev->ud.lock   = SPIN_LOCK_UNLOCKED; */
	spin_lock_init(&vdev->ud.lock);

	INIT_LIST_HEAD(&vdev->priv_rx);
	INIT_LIST_HEAD(&vdev->priv_tx);
	INIT_LIST_HEAD(&vdev->unlink_tx);
	INIT_LIST_HEAD(&vdev->unlink_rx);
	/* vdev->priv_lock = SPIN_LOCK_UNLOCKED; */
	spin_lock_init(&vdev->priv_lock);

	init_waitqueue_head(&vdev->waitq_tx);

	vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
	vdev->ud.eh_ops.reset = vhci_device_reset;
	vdev->ud.eh_ops.unusable = vhci_device_unusable;

	usbip_start_eh(&vdev->ud);
}


/*----------------------------------------------------------------------*/

static int vhci_start(struct usb_hcd *hcd)
{
	struct vhci_hcd *vhci = hcd_to_vhci(hcd);
	int rhport;
	int err = 0;

	usbip_dbg_vhci_hc("enter vhci_start\n");


	/* initialize private data of usb_hcd */

	for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
		struct vhci_device *vdev = &vhci->vdev[rhport];
		vhci_device_init(vdev);
		vdev->rhport = rhport;
	}

	atomic_set(&vhci->seqnum, 0);
	spin_lock_init(&vhci->lock);


	hcd->power_budget = 0; /* no limit */
	hcd->state  = HC_STATE_RUNNING;
	hcd->uses_new_polling = 1;


	/* vhci_hcd is now ready to be controlled through sysfs */
	err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
	if (err) {
		usbip_uerr("create sysfs files\n");
		return err;
	}

	return 0;
}

static void vhci_stop(struct usb_hcd *hcd)
{
	struct vhci_hcd *vhci = hcd_to_vhci(hcd);
	int rhport = 0;

	usbip_dbg_vhci_hc("stop VHCI controller\n");


	/* 1. remove the userland interface of vhci_hcd */
	sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group);

	/* 2. shutdown all the ports of vhci_hcd */
	for (rhport = 0 ; rhport < VHCI_NPORTS; rhport++) {
		struct vhci_device *vdev = &vhci->vdev[rhport];

		usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
		usbip_stop_eh(&vdev->ud);
	}


	usbip_uinfo("vhci_stop done\n");
}

/*----------------------------------------------------------------------*/

static int vhci_get_frame_number(struct usb_hcd *hcd)
{
	usbip_uerr("Not yet implemented\n");
	return 0;
}


#ifdef CONFIG_PM

/* FIXME: suspend/resume */
static int vhci_bus_suspend(struct usb_hcd *hcd)
{
	struct vhci_hcd *vhci = hcd_to_vhci(hcd);

	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);

	spin_lock_irq(&vhci->lock);
	/* vhci->rh_state = DUMMY_RH_SUSPENDED;
	 * set_link_state(vhci); */
	hcd->state = HC_STATE_SUSPENDED;
	spin_unlock_irq(&vhci->lock);

	return 0;
}

static int vhci_bus_resume(struct usb_hcd *hcd)
{
	struct vhci_hcd *vhci = hcd_to_vhci(hcd);
	int rc = 0;

	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);

	spin_lock_irq(&vhci->lock);
	if (!HCD_HW_ACCESSIBLE(hcd)) {
		rc = -ESHUTDOWN;
	} else {
		/* vhci->rh_state = DUMMY_RH_RUNNING;
		 * set_link_state(vhci);
		 * if (!list_empty(&vhci->urbp_list))
		 *	mod_timer(&vhci->timer, jiffies); */
		hcd->state = HC_STATE_RUNNING;
	}
	spin_unlock_irq(&vhci->lock);
	return rc;

	return 0;
}

#else

#define vhci_bus_suspend      NULL
#define vhci_bus_resume       NULL
#endif


static struct hc_driver vhci_hc_driver = {
	.description	= driver_name,
	.product_desc	= driver_desc,
	.hcd_priv_size	= sizeof(struct vhci_hcd),

	.flags		= HCD_USB2,

	.start		= vhci_start,
	.stop		= vhci_stop,

	.urb_enqueue	= vhci_urb_enqueue,
	.urb_dequeue	= vhci_urb_dequeue,

	.get_frame_number = vhci_get_frame_number,

	.hub_status_data = vhci_hub_status,
	.hub_control    = vhci_hub_control,
	.bus_suspend	= vhci_bus_suspend,
	.bus_resume	= vhci_bus_resume,
};

static int vhci_hcd_probe(struct platform_device *pdev)
{
	struct usb_hcd		*hcd;
	int			ret;

	usbip_uinfo("proving...\n");

	usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);

	/* will be removed */
	if (pdev->dev.dma_mask) {
		dev_info(&pdev->dev, "vhci_hcd DMA not supported\n");
		return -EINVAL;
	}

	/*
	 * Allocate and initialize hcd.
	 * Our private data is also allocated automatically.
	 */
	hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd) {
		usbip_uerr("create hcd failed\n");
		return -ENOMEM;
	}


	/* this is private data for vhci_hcd */
	the_controller = hcd_to_vhci(hcd);

	/*
	 * Finish generic HCD structure initialization and register.
	 * Call the driver's reset() and start() routines.
	 */
	ret = usb_add_hcd(hcd, 0, 0);
	if (ret != 0) {
		usbip_uerr("usb_add_hcd failed %d\n", ret);
		usb_put_hcd(hcd);
		the_controller = NULL;
		return ret;
	}


	usbip_dbg_vhci_hc("bye\n");
	return 0;
}


static int vhci_hcd_remove(struct platform_device *pdev)
{
	struct usb_hcd	*hcd;

	hcd = platform_get_drvdata(pdev);
	if (!hcd)
		return 0;

	/*
	 * Disconnects the root hub,
	 * then reverses the effects of usb_add_hcd(),
	 * invoking the HCD's stop() methods.
	 */
	usb_remove_hcd(hcd);
	usb_put_hcd(hcd);
	the_controller = NULL;


	return 0;
}


#ifdef CONFIG_PM

/* what should happen for USB/IP under suspend/resume? */
static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
{
	struct usb_hcd *hcd;
	int rhport = 0;
	int connected = 0;
	int ret = 0;

	dev_dbg(&pdev->dev, "%s\n", __func__);

	hcd = platform_get_drvdata(pdev);

	spin_lock(&the_controller->lock);

	for (rhport = 0; rhport < VHCI_NPORTS; rhport++)
		if (the_controller->port_status[rhport] &
						USB_PORT_STAT_CONNECTION)
			connected += 1;

	spin_unlock(&the_controller->lock);

	if (connected > 0) {
		usbip_uinfo("We have %d active connection%s. Do not suspend.\n",
				connected, (connected == 1 ? "" : "s"));
		ret =  -EBUSY;
	} else {
		usbip_uinfo("suspend vhci_hcd");
		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
	}

	return ret;
}

static int vhci_hcd_resume(struct platform_device *pdev)
{
	struct usb_hcd *hcd;

	dev_dbg(&pdev->dev, "%s\n", __func__);

	hcd = platform_get_drvdata(pdev);
	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
	usb_hcd_poll_rh_status(hcd);

	return 0;
}

#else

#define vhci_hcd_suspend	NULL
#define vhci_hcd_resume		NULL

#endif


static struct platform_driver vhci_driver = {
	.probe	= vhci_hcd_probe,
	.remove	= __devexit_p(vhci_hcd_remove),
	.suspend = vhci_hcd_suspend,
	.resume	= vhci_hcd_resume,
	.driver	= {
		.name = (char *) driver_name,
		.owner = THIS_MODULE,
	},
};

/*----------------------------------------------------------------------*/

/*
 * The VHCI 'device' is 'virtual'; not a real plug&play hardware.
 * We need to add this virtual device as a platform device arbitrarily:
 *	1. platform_device_register()
 */
static void the_pdev_release(struct device *dev)
{
	return;
}

static struct platform_device the_pdev = {
	/* should be the same name as driver_name */
	.name = (char *) driver_name,
	.id = -1,
	.dev = {
		/* .driver = &vhci_driver, */
		.release = the_pdev_release,
	},
};

static int __init vhci_init(void)
{
	int ret;

	usbip_dbg_vhci_hc("enter\n");
	if (usb_disabled())
		return -ENODEV;

	printk(KERN_INFO KBUILD_MODNAME ": %s, %s\n", driver_name,
	       DRIVER_VERSION);

	ret = platform_driver_register(&vhci_driver);
	if (ret < 0)
		goto err_driver_register;

	ret = platform_device_register(&the_pdev);
	if (ret < 0)
		goto err_platform_device_register;

	usbip_dbg_vhci_hc("bye\n");
	return ret;

	/* error occurred */
err_platform_device_register:
	platform_driver_unregister(&vhci_driver);

err_driver_register:
	usbip_dbg_vhci_hc("bye\n");
	return ret;
}
module_init(vhci_init);

static void __exit vhci_cleanup(void)
{
	usbip_dbg_vhci_hc("enter\n");

	platform_device_unregister(&the_pdev);
	platform_driver_unregister(&vhci_driver);

	usbip_dbg_vhci_hc("bye\n");
}
module_exit(vhci_cleanup);