# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/fsl,spi-fsl-qspi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale Quad Serial Peripheral Interface (QuadSPI)

maintainers:
  - Han Xu <han.xu@nxp.com>

allOf:
  - $ref: "spi-controller.yaml#"

properties:
  compatible:
    oneOf:
      - enum:
          - fsl,vf610-qspi
          - fsl,imx6sx-qspi
          - fsl,imx7d-qspi
          - fsl,imx6ul-qspi
          - fsl,ls1021a-qspi
          - fsl,ls2080a-qspi
      - items:
          - enum:
              - fsl,ls1043a-qspi
          - const: fsl,ls1021a-qspi
      - items:
          - enum:
              - fsl,imx8mq-qspi
          - const: fsl,imx7d-qspi

  reg:
    items:
      - description: registers
      - description: memory mapping

  reg-names:
    items:
      - const: QuadSPI
      - const: QuadSPI-memory

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: SoC SPI qspi_en clock
      - description: SoC SPI qspi clock

  clock-names:
    items:
      - const: qspi_en
      - const: qspi

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        spi@1550000 {
            compatible = "fsl,ls1021a-qspi";
            reg = <0x0 0x1550000 0x0 0x100000>,
                  <0x0 0x40000000 0x0 0x10000000>;
            reg-names = "QuadSPI", "QuadSPI-memory";
            interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
            #address-cells = <1>;
            #size-cells = <0>;
            clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>,
                     <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>;
            clock-names = "qspi_en", "qspi";

            flash@0 {
                compatible = "jedec,spi-nor";
                spi-max-frequency = <50000000>;
                reg = <0>;
                spi-rx-bus-width = <4>;
                spi-tx-bus-width = <4>;
            };
        };
    };