// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
 */

/* AM437x SK EVM */

/dts-v1/;

#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "TI AM437x SK EVM";
	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";

	aliases {
		display0 = &lcd0;
	};

	chosen {
		stdout-path = &uart0;
	};

	/* fixed 32k external oscillator clock */
	clk_32k_rtc: clk_32k_rtc {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <32768>;
	};

	lcd_bl: backlight {
		compatible = "pwm-backlight";
		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
		brightness-levels = <0 51 53 56 62 75 101 152 255>;
		default-brightness-level = <8>;
	};

	sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "AM437x-SK-EVM";
		simple-audio-card,widgets =
			"Headphone", "Headphone Jack",
			"Line", "Line In";
		simple-audio-card,routing =
			"Headphone Jack",	"HPLOUT",
			"Headphone Jack",	"HPROUT",
			"LINE1L",		"Line In",
			"LINE1R",		"Line In";
		simple-audio-card,format = "dsp_b";
		simple-audio-card,bitclock-master = <&sound_master>;
		simple-audio-card,frame-master = <&sound_master>;
		simple-audio-card,bitclock-inversion;

		simple-audio-card,cpu {
			sound-dai = <&mcasp1>;
		};

		sound_master: simple-audio-card,codec {
			sound-dai = <&tlv320aic3106>;
			system-clock-frequency = <24000000>;
		};
	};

	matrix_keypad: matrix_keypad0 {
		compatible = "gpio-matrix-keypad";

		pinctrl-names = "default";
		pinctrl-0 = <&matrix_keypad_pins>;

		debounce-delay-ms = <5>;
		col-scan-delay-us = <5>;

		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */

		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */

		linux,keymap = <
				MATRIX_KEY(0, 0, KEY_DOWN)
				MATRIX_KEY(0, 1, KEY_RIGHT)
				MATRIX_KEY(1, 0, KEY_LEFT)
				MATRIX_KEY(1, 1, KEY_UP)
			>;
	};

	leds {
		compatible = "gpio-leds";

		pinctrl-names = "default";
		pinctrl-0 = <&leds_pins>;

		led0 {
			label = "am437x-sk:red:heartbeat";
			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
			linux,default-trigger = "heartbeat";
			default-state = "off";
		};

		led1 {
			label = "am437x-sk:green:mmc1";
			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
			linux,default-trigger = "mmc0";
			default-state = "off";
		};

		led2 {
			label = "am437x-sk:blue:cpu0";
			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
			linux,default-trigger = "cpu0";
			default-state = "off";
		};

		led3 {
			label = "am437x-sk:blue:usr3";
			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
			default-state = "off";
		};
	};

	lcd0: display {
		compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
		label = "lcd";

		pinctrl-names = "default";
		pinctrl-0 = <&lcd_pins>;

		backlight = <&lcd_bl>;

		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;

		port {
			lcd_in: endpoint {
				remote-endpoint = <&dpi_out>;
			};
		};
	};

	vmmcwl_fixed: fixedregulator-mmcwl {
		/*
		 * WL_EN is not SDIO standard compliant. It is an out of band
		 * signal and hard to be dealt with in a standard way by the
		 * SDIO core driver.
		 * So modelling the WL_EN line as a regulator was a natural
		 * choice as the MMC core already deals with MMC supplies.
		 */
		compatible = "regulator-fixed";
		regulator-name = "vmmcwl_fixed";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&am43xx_pinmux {
	matrix_keypad_pins: matrix_keypad_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
		>;
	};

	leds_pins: leds_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
		>;
	};

	i2c0_pins: i2c0_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
		>;
	};

	i2c1_pins: i2c1_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
		>;
	};

	ecap0_pins: backlight_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
		>;
	};

	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
		>;
	};

	vpfe0_pins_default: vpfe0_pins_default {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
		>;
	};

	vpfe0_pins_sleep: vpfe0_pins_sleep {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
		>;
	};

	clkout1_pin: pinmux_clkout1_pin {
		pinctrl-single,pins = <
			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
		>;
	};

	cpsw_default: cpsw_default {
		pinctrl-single,pins = <
			/* Slave 1 */
			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */

			/* Slave 2 */
			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
		>;
	};

	cpsw_sleep: cpsw_sleep {
		pinctrl-single,pins = <
			/* Slave 1 reset value */
			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)

			/* Slave 2 reset value */
			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	davinci_mdio_default: davinci_mdio_default {
		pinctrl-single,pins = <
			/* MDIO */
			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
		>;
	};

	davinci_mdio_sleep: davinci_mdio_sleep {
		pinctrl-single,pins = <
			/* MDIO reset value */
			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	dss_pins: dss_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */

		>;
	};

	qspi_pins: qspi_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
		>;
	};

	mcasp1_pins: mcasp1_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
		>;
	};

	mcasp1_pins_sleep: mcasp1_pins_sleep {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	lcd_pins: lcd_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
		>;
	};

	usb1_pins: usb1_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
		>;
	};

	usb2_pins: usb2_pins {
		pinctrl-single,pins = <
			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
		>;
	};

	mmc3_pins_default: pinmux_mmc3_pins_default {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
		>;
	};

	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
			AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
			AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
		>;
	};

	wlan_pins_default: pinmux_wlan_pins_default {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
		>;
	};

	wlan_pins_sleep: pinmux_wlan_pins_sleep {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
		>;
	};

	uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)		/* uart1_rxd.uart1_rxd */
			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
		>;
	};

	uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
		pinctrl-single,pins = <
			AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rxd.uart1_rxd */
			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_txd.uart1_txd */
			AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_ctsn.uart1_ctsn */
			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rtsn.uart1_rtsn */
			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
		>;
	};
};

&i2c0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;
	clock-frequency = <100000>;

	tps@24 {
		compatible = "ti,tps65218";
		reg = <0x24>;
		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-controller;
		#interrupt-cells = <2>;

		dcdc1: regulator-dcdc1 {
			/* VDD_CORE limits min of OPP50 and max of OPP100 */
			regulator-name = "vdd_core";
			regulator-min-microvolt = <912000>;
			regulator-max-microvolt = <1144000>;
			regulator-boot-on;
			regulator-always-on;
		};

		dcdc2: regulator-dcdc2 {
			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
			regulator-name = "vdd_mpu";
			regulator-min-microvolt = <912000>;
			regulator-max-microvolt = <1378000>;
			regulator-boot-on;
			regulator-always-on;
		};

		dcdc3: regulator-dcdc3 {
			regulator-name = "vdds_ddr";
			regulator-boot-on;
			regulator-always-on;
			regulator-state-mem {
				regulator-on-in-suspend;
			};
			regulator-state-disk {
				regulator-off-in-suspend;
			};
		};

		dcdc4: regulator-dcdc4 {
			regulator-name = "v3_3d";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		};

		dcdc5: regulator-dcdc5 {
			compatible = "ti,tps65218-dcdc5";
			regulator-name = "v1_0bat";
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
			regulator-boot-on;
			regulator-always-on;
			regulator-state-mem {
				regulator-on-in-suspend;
			};
		};

		dcdc6: regulator-dcdc6 {
			compatible = "ti,tps65218-dcdc6";
			regulator-name = "v1_8bat";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-boot-on;
			regulator-always-on;
			regulator-state-mem {
				regulator-on-in-suspend;
			};
		};

		ldo1: regulator-ldo1 {
			regulator-name = "v1_8d";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-boot-on;
			regulator-always-on;
		};

		power-button {
			compatible = "ti,tps65218-pwrbutton";
			status = "okay";
			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
		};
	};

	at24@50 {
		compatible = "atmel,24c256";
		pagesize = <64>;
		reg = <0x50>;
	};
};

&i2c1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	clock-frequency = <400000>;

	ov2659@30 {
		compatible = "ovti,ov2659";
		reg = <0x30>;
		pinctrl-names = "default";
		pinctrl-0 = <&clkout1_pin>;

		clocks = <&clkout1_mux_ck>;
		clock-names = "xvclk";
		assigned-clocks = <&clkout1_mux_ck>;
		assigned-clock-parents = <&clkout1_osc_div_ck>;

		port {
			ov2659_1: endpoint {
				remote-endpoint = <&vpfe0_ep>;
				link-frequencies = /bits/ 64 <70000000>;
			};
		};
	};

	edt-ft5306@38 {
		status = "okay";
		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
		pinctrl-names = "default";
		pinctrl-0 = <&edt_ft5306_ts_pins>;

		reg = <0x38>;
		interrupt-parent = <&gpio0>;
		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;

		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;

		touchscreen-size-x = <480>;
		touchscreen-size-y = <272>;

		wakeup-source;
	};

	tlv320aic3106: tlv320aic3106@1b {
		#sound-dai-cells = <0>;
		compatible = "ti,tlv320aic3106";
		reg = <0x1b>;
		status = "okay";

		/* Regulators */
		AVDD-supply = <&dcdc4>;
		IOVDD-supply = <&dcdc4>;
		DRVDD-supply = <&dcdc4>;
		DVDD-supply = <&ldo1>;
	};

	lis331dlh@18 {
		compatible = "st,lis331dlh";
		reg = <0x18>;
		status = "okay";

		Vdd-supply = <&dcdc4>;
		Vdd_IO-supply = <&dcdc4>;
		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
	};
};

&epwmss0 {
	status = "okay";
};

&ecap0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&ecap0_pins>;
};

&gpio0 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&gpio4 {
	status = "okay";
};

&gpio5 {
	status = "okay";
};

&mmc1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;

	vmmc-supply = <&dcdc4>;
	bus-width = <4>;
	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};

&uart1 {
	status = "okay";
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&uart1_bt_pins_default>;
	pinctrl-1 = <&uart1_bt_pins_sleep>;
};

&mmc3 {
	status = "okay";
	/*
	 * these are on the crossbar and are outlined in the
	 * xbar-event-map element
	 */
	dmas = <&edma_xbar 30 0 1>,
		<&edma_xbar 31 0 2>;
	dma-names = "tx", "rx";
	vmmc-supply = <&vmmcwl_fixed>;
	bus-width = <4>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&mmc3_pins_default>;
	pinctrl-1 = <&mmc3_pins_sleep>;
	cap-power-off-card;
	keep-power-in-suspend;
	non-removable;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1835";
		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&wlan_pins_default>;
		pinctrl-1 = <&wlan_pins_sleep>;
		reg = <2>;
		interrupt-parent = <&gpio4>;
		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
	};
};

&usb2_phy1 {
	status = "okay";
};

&usb1 {
	dr_mode = "otg";
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&usb1_pins>;
};

&usb2_phy2 {
	status = "okay";
};

&usb2 {
	dr_mode = "host";
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&usb2_pins>;
};

&qspi {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&qspi_pins>;

	spi-max-frequency = <48000000>;
	m25p80@0 {
		compatible = "mx66l51235l";
		spi-max-frequency = <48000000>;
		reg = <0>;
		spi-cpol;
		spi-cpha;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		#address-cells = <1>;
		#size-cells = <1>;

		/* MTD partition table.
		 * The ROM checks the first 512KiB
		 * for a valid file to boot(XIP).
		 */
		partition@0 {
			label = "QSPI.U_BOOT";
			reg = <0x00000000 0x000080000>;
		};
		partition@1 {
			label = "QSPI.U_BOOT.backup";
			reg = <0x00080000 0x00080000>;
		};
		partition@2 {
			label = "QSPI.U-BOOT-SPL_OS";
			reg = <0x00100000 0x00010000>;
		};
		partition@3 {
			label = "QSPI.U_BOOT_ENV";
			reg = <0x00110000 0x00010000>;
		};
		partition@4 {
			label = "QSPI.U-BOOT-ENV.backup";
			reg = <0x00120000 0x00010000>;
		};
		partition@5 {
			label = "QSPI.KERNEL";
			reg = <0x00130000 0x0800000>;
		};
		partition@6 {
			label = "QSPI.FILESYSTEM";
			reg = <0x00930000 0x36D0000>;
		};
	};
};

&mac_sw {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&cpsw_default>;
	pinctrl-1 = <&cpsw_sleep>;
	status = "okay";
};

&davinci_mdio_sw {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&davinci_mdio_default>;
	pinctrl-1 = <&davinci_mdio_sleep>;

	ethphy0: ethernet-phy@4 {
		reg = <4>;
	};

	ethphy1: ethernet-phy@5 {
		reg = <5>;
	};
};

&cpsw_port1 {
	phy-handle = <&ethphy0>;
	phy-mode = "rgmii-rxid";
	ti,dual-emac-pvid = <1>;
};

&cpsw_port2 {
	phy-handle = <&ethphy1>;
	phy-mode = "rgmii-rxid";
	ti,dual-emac-pvid = <2>;
};

&elm {
	status = "okay";
};

&mcasp1 {
	#sound-dai-cells = <0>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&mcasp1_pins>;
	pinctrl-1 = <&mcasp1_pins_sleep>;

	status = "okay";

	op-mode = <0>;
	tdm-slots = <2>;
	serial-dir = <
		0 0 1 2
	>;

	tx-num-evt = <1>;
	rx-num-evt = <1>;
};

&dss {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&dss_pins>;

	port {
		dpi_out: endpoint@0 {
			remote-endpoint = <&lcd_in>;
			data-lines = <24>;
		};
	};
};

&rtc {
	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
	clock-names = "ext-clk", "int-clk";
	status = "okay";
};

&wdt {
	status = "okay";
};

&cpu {
	cpu0-supply = <&dcdc2>;
};

&vpfe0 {
	status = "okay";
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&vpfe0_pins_default>;
	pinctrl-1 = <&vpfe0_pins_sleep>;

	/* Camera port */
	port {
		vpfe0_ep: endpoint {
			remote-endpoint = <&ov2659_1>;
			ti,am437x-vpfe-interface = <0>;
			bus-width = <8>;
			hsync-active = <0>;
			vsync-active = <0>;
		};
	};
};

&pruss1_mdio {
	status = "disabled";
};