blob: 969d990767fc1a6082d126ccb8642f80aff07811 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
*
* Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*/
/dts-v1/;
#include "at91sam9260.dtsi"
/ {
model = "Calao QIL A9260";
compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <12000000>;
};
};
ahb {
apb {
tcb0: timer@fffa0000 {
timer@0 {
compatible = "atmel,tcb-timer";
reg = <0>, <1>;
};
timer@2 {
compatible = "atmel,tcb-timer";
reg = <2>;
};
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
mmc0: mmc@fffa8000 {
pinctrl-0 = <
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
usart0: serial@fffb0000 {
pinctrl-0 =
<&pinctrl_usart0
&pinctrl_usart0_rts
&pinctrl_usart0_cts
&pinctrl_usart0_dtr_dsr
&pinctrl_usart0_dcd
&pinctrl_usart0_ri>;
status = "okay";
};
usart1: serial@fffb4000 {
pinctrl-0 =
<&pinctrl_usart1
&pinctrl_usart1_rts
&pinctrl_usart1_cts>;
status = "okay";
};
usart2: serial@fffb8000 {
pinctrl-0 =
<&pinctrl_usart2
&pinctrl_usart2_rts
&pinctrl_usart2_cts>;
status = "okay";
};
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
spi0: spi@fffc8000 {
status = "okay";
cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
m41t94@0 {
compatible = "st,m41t94";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
dbgu: serial@fffff200 {
status = "okay";
};
shdwc@fffffd10 {
atmel,wakeup-counter = <10>;
atmel,wakeup-rtt-timer;
};
};
usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
ebi: ebi@10000000 {
status = "okay";
nand_controller: nand-controller {
status = "okay";
pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
pinctrl-names = "default";
nand@3 {
reg = <0x3 0x0 0x800000>;
rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
label = "atmel_nand";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x20000>;
};
barebox@20000 {
label = "barebox";
reg = <0x20000 0x40000>;
};
bareboxenv@60000 {
label = "bareboxenv";
reg = <0x60000 0x20000>;
};
bareboxenv2@80000 {
label = "bareboxenv2";
reg = <0x80000 0x20000>;
};
oftree@a0000 {
label = "oftree";
reg = <0xa0000 0x20000>;
};
kernel@c0000 {
label = "kernel";
reg = <0xc0000 0x400000>;
};
rootfs@4c0000 {
label = "rootfs";
reg = <0x4c0000 0x7800000>;
};
data@7cc0000 {
label = "data";
reg = <0x7cc0000 0x8340000>;
};
};
};
};
};
};
leds {
compatible = "gpio-leds";
user_led {
label = "user_led";
gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_pb {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
wakeup-source;
};
};
i2c-gpio-0 {
status = "okay";
};
};