blob: 51546fccc61688482b49c24283f6db3173df7dfb [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
};
};
mpcore@18310000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18310000 0x00008000>;
#address-cells = <1>;
#size-cells = <1>;
gic: interrupt-controller@1000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x1000 0x1000>,
<0x2000 0x0100>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
alp: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <40000000>;
};
};
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
ranges = <0x00000000 0x18000000 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <1>;
interrupt-map-mask = <0x000fffff 0xffff>;
interrupt-map =
/* ChipCommon */
<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
/* IEEE 802.11 0 */
<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
/* PCIe Controller 0 */
<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
/* USB 2.0 Controller */
<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
/* Ethernet Controller 0 */
<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
/* IEEE 802.11 1 */
<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
/* Ethernet Controller 1 */
<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
chipcommon: chipcommon@0 {
compatible = "simple-bus";
reg = <0x00000000 0x1000>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
gpio-controller;
#gpio-cells = <2>;
uart0: serial@300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&alp>;
status = "okay";
};
};
pcie0: pcie@2000 {
reg = <0x00002000 0x1000>;
};
usb2: usb2@4000 {
reg = <0x4000 0x1000>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
ehci: usb@4000 {
compatible = "generic-ehci";
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ehci_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
ehci_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
ohci: usb@d000 {
#usb-cells = <0>;
compatible = "generic-ohci";
reg = <0xd000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ohci_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
ohci_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
gmac0: ethernet@5000 {
reg = <0x5000 0x1000>;
};
gmac1: ethernet@b000 {
reg = <0xb000 0x1000>;
};
pmu@12000 {
compatible = "simple-mfd", "syscon";
reg = <0x00012000 0x00001000>;
ilp: ilp {
compatible = "brcm,bcm53573-ilp";
clocks = <&alp>;
#clock-cells = <0>;
clock-output-names = "ilp";
};
};
};
};