| /* |
| * Copyright 2013 CompuLab Ltd. |
| * Copyright 2016 Christopher Spinrath |
| * |
| * Based on the devicetree distributed with the vendor kernel for the |
| * Utilite Pro: |
| * Copyright 2013 CompuLab Ltd. |
| * Author: Valentin Raevsky <valentin@compulab.co.il> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/input/input.h> |
| #include "imx6q-cm-fx6.dts" |
| |
| / { |
| model = "CompuLab Utilite Pro"; |
| compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q"; |
| |
| aliases { |
| ethernet1 = ð1; |
| rtc0 = &em3027; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| encoder { |
| compatible = "ti,tfp410"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| tfp410_in: endpoint { |
| remote-endpoint = <¶llel_display_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| tfp410_out: endpoint { |
| remote-endpoint = <&hdmi_connector_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| power { |
| label = "Power Button"; |
| gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_POWER>; |
| wakeup-source; |
| }; |
| }; |
| |
| hdmi-connector { |
| compatible = "hdmi-connector"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hpd>; |
| type = "a"; |
| ddc-i2c-bus = <&i2c_dvi_ddc>; |
| hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| |
| port { |
| hdmi_connector_in: endpoint { |
| remote-endpoint = <&tfp410_out>; |
| }; |
| }; |
| }; |
| |
| i2cmux { |
| compatible = "i2c-mux-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1mux>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| i2c-parent = <&i2c1>; |
| |
| i2c@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| pagesize = <16>; |
| }; |
| |
| em3027: rtc@56 { |
| compatible = "emmicro,em3027"; |
| reg = <0x56>; |
| }; |
| }; |
| |
| i2c_dvi_ddc: i2c@1 { |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| parallel-display { |
| compatible = "fsl,imx-parallel-display"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1>; |
| |
| interface-pix-fmt = "rgb24"; |
| |
| port@0 { |
| reg = <0>; |
| |
| parallel_display_in: endpoint { |
| remote-endpoint = <&ipu1_di0_disp0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| parallel_display_out: endpoint { |
| remote-endpoint = <&tfp410_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| /* |
| * A single IPU is not able to drive both display interfaces available on the |
| * Utilite Pro at high resolution due to its bandwidth limitation. Since the |
| * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the |
| * SoC-internal Designware HDMI encoder forcing the latter to be connected to |
| * IPU2 instead of IPU1. |
| */ |
| /delete-node/&ipu1_di0_hdmi; |
| /delete-node/&hdmi_mux_0; |
| /delete-node/&ipu1_di1_hdmi; |
| /delete-node/&hdmi_mux_1; |
| |
| &hdmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmicec>; |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_gpio_keys: gpio_keysgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_hdmicec: hdmicecgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| >; |
| }; |
| |
| pinctrl_hpd: hpdgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c1mux: i2c1muxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_ipu1: ipu1grp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 |
| MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 |
| MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 |
| MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 |
| MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 |
| MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 |
| MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 |
| >; |
| }; |
| }; |
| |
| &ipu1_di0_disp0 { |
| remote-endpoint = <¶llel_display_in>; |
| }; |
| |
| &pcie { |
| pcie@0,0 { |
| reg = <0x000000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| /* non-removable i211 ethernet card */ |
| eth1: intel,i211@pcie0,0 { |
| reg = <0x010000 0 0 0 0>; |
| }; |
| }; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| no-1-8-v; |
| broken-cd; |
| keep-power-in-suspend; |
| status = "okay"; |
| }; |
