Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixes
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index d036a80..d281492 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1690,9 +1690,6 @@ struct aac_dev
 #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
 	(dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
 
-#define aac_adapter_check_health(dev) \
-	(dev)->a_ops.adapter_check_health(dev)
-
 #define aac_adapter_restart(dev, bled, reset_type) \
 	((dev)->a_ops.adapter_restart(dev, bled, reset_type))
 
@@ -2615,6 +2612,14 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 	return capacity;
 }
 
+static inline int aac_adapter_check_health(struct aac_dev *dev)
+{
+	if (unlikely(pci_channel_offline(dev->pdev)))
+		return -1;
+
+	return (dev)->a_ops.adapter_check_health(dev);
+}
+
 /* SCp.phase values */
 #define AAC_OWNER_MIDLEVEL	0x101
 #define AAC_OWNER_LOWLEVEL	0x102
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index c8172f1..1f49183 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1873,7 +1873,8 @@ int aac_check_health(struct aac_dev * aac)
 	spin_unlock_irqrestore(&aac->fib_lock, flagv);
 
 	if (BlinkLED < 0) {
-		printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
+		printk(KERN_ERR "%s: Host adapter is dead (or got a PCI error) %d\n",
+				aac->name, BlinkLED);
 		goto out;
 	}
 
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index b29afaf..5d5e272f 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6293,7 +6293,12 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
 		break;
 	case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */
 	case IPR_IOASA_IR_DUAL_IOA_DISABLED:
-		scsi_cmd->result |= (DID_PASSTHROUGH << 16);
+		/*
+		 * exception: do not set DID_PASSTHROUGH on CHECK CONDITION
+		 * so SCSI mid-layer and upper layers handle it accordingly.
+		 */
+		if (scsi_cmd->result != SAM_STAT_CHECK_CONDITION)
+			scsi_cmd->result |= (DID_PASSTHROUGH << 16);
 		break;
 	case IPR_IOASC_BUS_WAS_RESET:
 	case IPR_IOASC_BUS_WAS_RESET_BY_OTHER:
diff --git a/drivers/scsi/qedf/qedf_fip.c b/drivers/scsi/qedf/qedf_fip.c
index ed58b91..e10b91c 100644
--- a/drivers/scsi/qedf/qedf_fip.c
+++ b/drivers/scsi/qedf/qedf_fip.c
@@ -99,7 +99,8 @@ static void qedf_fcoe_process_vlan_resp(struct qedf_ctx *qedf,
 		qedf_set_vlan_id(qedf, vid);
 
 		/* Inform waiter that it's ok to call fcoe_ctlr_link up() */
-		complete(&qedf->fipvlan_compl);
+		if (!completion_done(&qedf->fipvlan_compl))
+			complete(&qedf->fipvlan_compl);
 	}
 }
 
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 8e2a160..cceddd9 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -2803,6 +2803,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 		atomic_set(&qedf->num_offloads, 0);
 		qedf->stop_io_on_error = false;
 		pci_set_drvdata(pdev, qedf);
+		init_completion(&qedf->fipvlan_compl);
 
 		QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_INFO,
 		   "QLogic FastLinQ FCoE Module qedf %s, "
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f28d38e..1a0bf7e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1160,8 +1160,13 @@ static inline
 uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
 {
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+	struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
 
-	return ((RD_REG_DWORD(&reg->host_status)) == ISP_REG_DISCONNECT);
+	if (IS_P3P_TYPE(ha))
+		return ((RD_REG_DWORD(&reg82->host_int)) == ISP_REG_DISCONNECT);
+	else
+		return ((RD_REG_DWORD(&reg->host_status)) ==
+			ISP_REG_DISCONNECT);
 }
 
 /**************************************************************************
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index fb9b4d2..fe0f799 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2102,6 +2102,22 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
 
 #define READ_CAPACITY_RETRIES_ON_RESET	10
 
+/*
+ * Ensure that we don't overflow sector_t when CONFIG_LBDAF is not set
+ * and the reported logical block size is bigger than 512 bytes. Note
+ * that last_sector is a u64 and therefore logical_to_sectors() is not
+ * applicable.
+ */
+static bool sd_addressable_capacity(u64 lba, unsigned int sector_size)
+{
+	u64 last_sector = (lba + 1ULL) << (ilog2(sector_size) - 9);
+
+	if (sizeof(sector_t) == 4 && last_sector > U32_MAX)
+		return false;
+
+	return true;
+}
+
 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 						unsigned char *buffer)
 {
@@ -2167,7 +2183,7 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		return -ENODEV;
 	}
 
-	if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
+	if (!sd_addressable_capacity(lba, sector_size)) {
 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
 			"kernel compiled with support for large block "
 			"devices.\n");
@@ -2256,7 +2272,7 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		return sector_size;
 	}
 
-	if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
+	if (!sd_addressable_capacity(lba, sector_size)) {
 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
 			"kernel compiled with support for large block "
 			"devices.\n");
@@ -2956,7 +2972,8 @@ static int sd_revalidate_disk(struct gendisk *disk)
 		q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
 		rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
 	} else
-		rw_max = BLK_DEF_MAX_SECTORS;
+		rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
+				      (sector_t)BLK_DEF_MAX_SECTORS);
 
 	/* Combine with controller limits */
 	q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q));
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 0b29b93..a8f6302 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -836,6 +836,7 @@ static void get_capabilities(struct scsi_cd *cd)
 	unsigned char *buffer;
 	struct scsi_mode_data data;
 	struct scsi_sense_hdr sshdr;
+	unsigned int ms_len = 128;
 	int rc, n;
 
 	static const char *loadmech[] =
@@ -862,10 +863,11 @@ static void get_capabilities(struct scsi_cd *cd)
 	scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
 
 	/* ask for mode page 0x2a */
-	rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128,
+	rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, ms_len,
 			     SR_TIMEOUT, 3, &data, NULL);
 
-	if (!scsi_status_is_good(rc)) {
+	if (!scsi_status_is_good(rc) || data.length > ms_len ||
+	    data.header_length + data.block_descriptor_length > data.length) {
 		/* failed, drive doesn't have capabilities mode page */
 		cd->cdi.speed = 1;
 		cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R |