doc: Remove references to IBM Calgary
The Calgary IOMMU driver has been removed in
90dc392fc445 ("x86: Remove the calgary IOMMU driver")
Clean up stale docs that refer to it.
Signed-off-by: Hubert Jasudowicz <hubert.jasudowicz@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1bd2b57dd1db53df09e520b8170ff61418805de4.1623274832.git.hubert.jasudowicz@gmail.com
diff --git a/Documentation/x86/x86_64/boot-options.rst b/Documentation/x86/x86_64/boot-options.rst
index 324ceff..5f62b3b 100644
--- a/Documentation/x86/x86_64/boot-options.rst
+++ b/Documentation/x86/x86_64/boot-options.rst
@@ -247,16 +247,11 @@
Kernel boot message: "PCI-DMA: Using software bounce buffering
for IO (SWIOTLB)"
- 4. <arch/x86_64/pci-calgary.c> : IBM Calgary hardware IOMMU. Used in IBM
- pSeries and xSeries servers. This hardware IOMMU supports DMA address
- mapping with memory protection, etc.
- Kernel boot message: "PCI-DMA: Using Calgary IOMMU"
-
::
iommu=[<size>][,noagp][,off][,force][,noforce]
[,memaper[=<order>]][,merge][,fullflush][,nomerge]
- [,noaperture][,calgary]
+ [,noaperture]
General iommu options:
@@ -295,8 +290,6 @@
Don't initialize the AGP driver and use full aperture.
panic
Always panic when IOMMU overflows.
- calgary
- Use the Calgary IOMMU if it is available
iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
implementation:
@@ -307,28 +300,6 @@
force
Force all IO through the software TLB.
-Settings for the IBM Calgary hardware IOMMU currently found in IBM
-pSeries and xSeries machines
-
- calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
- Set the size of each PCI slot's translation table when using the
- Calgary IOMMU. This is the size of the translation table itself
- in main memory. The smallest table, 64k, covers an IO space of
- 32MB; the largest, 8MB table, can cover an IO space of 4GB.
- Normally the kernel will make the right choice by itself.
- calgary=[translate_empty_slots]
- Enable translation even on slots that have no devices attached to
- them, in case a device will be hotplugged in the future.
- calgary=[disable=<PCI bus number>]
- Disable translation on a given PHB. For
- example, the built-in graphics adapter resides on the first bridge
- (PCI bus number 0); if translation (isolation) is enabled on this
- bridge, X servers that access the hardware directly from user
- space might stop working. Use this option if you have devices that
- are accessed from userspace directly on some PCI host bridge.
- panic
- Always panic when IOMMU overflows
-
Miscellaneous
=============
