| // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) |
| /* |
| * Realtek RTD1395 SoC family |
| * |
| * Copyright (c) 2019 Andreas Färber |
| */ |
| |
| /memreserve/ 0x0000000000000000 0x000000000002f000; |
| /memreserve/ 0x000000000002f000 0x00000000000d1000; |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/realtek,rtd1295.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| rpc_comm: rpc@2f000 { |
| reg = <0x2f000 0x1000>; |
| }; |
| |
| rpc_ringbuf: rpc@1ffe000 { |
| reg = <0x1ffe000 0x4000>; |
| }; |
| |
| tee: tee@10100000 { |
| reg = <0x10100000 0xf00000>; |
| no-map; |
| }; |
| }; |
| |
| arm_pmu: arm-pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| osc27M: osc { |
| compatible = "fixed-clock"; |
| clock-frequency = <27000000>; |
| #clock-cells = <0>; |
| clock-output-names = "osc27M"; |
| }; |
| |
| soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */ |
| <0x98000000 0x98000000 0x68000000>; |
| |
| rbus: bus@98000000 { |
| compatible = "simple-bus"; |
| reg = <0x98000000 0x200000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x98000000 0x200000>; |
| |
| crt: syscon@0 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x0 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1000>; |
| }; |
| |
| iso: syscon@7000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x7000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x7000 0x1000>; |
| }; |
| |
| sb2: syscon@1a000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x1a000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1a000 0x1000>; |
| }; |
| |
| misc: syscon@1b000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x1b000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1b000 0x1000>; |
| }; |
| |
| scpu_wrapper: syscon@1d000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x1d000 0x2000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1d000 0x2000>; |
| }; |
| }; |
| |
| gic: interrupt-controller@ff011000 { |
| compatible = "arm,gic-400"; |
| reg = <0xff011000 0x1000>, |
| <0xff012000 0x2000>, |
| <0xff014000 0x2000>, |
| <0xff016000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| }; |
| }; |
| |
| &crt { |
| reset1: reset-controller@0 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x0 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| reset2: reset-controller@4 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x4 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| reset3: reset-controller@8 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x8 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| reset4: reset-controller@50 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x50 0x4>; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| &iso { |
| iso_reset: reset-controller@88 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x88 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| wdt: watchdog@680 { |
| compatible = "realtek,rtd1295-watchdog"; |
| reg = <0x680 0x100>; |
| clocks = <&osc27M>; |
| }; |
| |
| uart0: serial@800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x800 0x400>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <27000000>; |
| resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &misc { |
| uart1: serial@200 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x200 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <432000000>; |
| resets = <&reset2 RTD1295_RSTN_UR1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x400 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <432000000>; |
| resets = <&reset2 RTD1295_RSTN_UR2>; |
| status = "disabled"; |
| }; |
| }; |