| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * BSS client mode implementation |
| * Copyright 2003-2008, Jouni Malinen <j@w1.fi> |
| * Copyright 2004, Instant802 Networks, Inc. |
| * Copyright 2005, Devicescape Software, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2007, Michael Wu <flamingice@sourmilk.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright (C) 2015 - 2017 Intel Deutschland GmbH |
| * Copyright (C) 2018 - 2024 Intel Corporation |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/fips.h> |
| #include <linux/if_ether.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/moduleparam.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/crc32.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <net/mac80211.h> |
| #include <asm/unaligned.h> |
| |
| #include "ieee80211_i.h" |
| #include "driver-ops.h" |
| #include "rate.h" |
| #include "led.h" |
| #include "fils_aead.h" |
| |
| #define IEEE80211_AUTH_TIMEOUT (HZ / 5) |
| #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) |
| #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) |
| #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2) |
| #define IEEE80211_AUTH_MAX_TRIES 3 |
| #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) |
| #define IEEE80211_AUTH_WAIT_SAE_RETRY (HZ * 2) |
| #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) |
| #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) |
| #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) |
| #define IEEE80211_ASSOC_MAX_TRIES 3 |
| |
| #define IEEE80211_ADV_TTLM_SAFETY_BUFFER_MS msecs_to_jiffies(100) |
| #define IEEE80211_ADV_TTLM_ST_UNDERFLOW 0xff00 |
| |
| #define IEEE80211_NEG_TTLM_REQ_TIMEOUT (HZ / 5) |
| |
| static int max_nullfunc_tries = 2; |
| module_param(max_nullfunc_tries, int, 0644); |
| MODULE_PARM_DESC(max_nullfunc_tries, |
| "Maximum nullfunc tx tries before disconnecting (reason 4)."); |
| |
| static int max_probe_tries = 5; |
| module_param(max_probe_tries, int, 0644); |
| MODULE_PARM_DESC(max_probe_tries, |
| "Maximum probe tries before disconnecting (reason 4)."); |
| |
| /* |
| * Beacon loss timeout is calculated as N frames times the |
| * advertised beacon interval. This may need to be somewhat |
| * higher than what hardware might detect to account for |
| * delays in the host processing frames. But since we also |
| * probe on beacon miss before declaring the connection lost |
| * default to what we want. |
| */ |
| static int beacon_loss_count = 7; |
| module_param(beacon_loss_count, int, 0644); |
| MODULE_PARM_DESC(beacon_loss_count, |
| "Number of beacon intervals before we decide beacon was lost."); |
| |
| /* |
| * Time the connection can be idle before we probe |
| * it to see if we can still talk to the AP. |
| */ |
| #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ) |
| /* |
| * Time we wait for a probe response after sending |
| * a probe request because of beacon loss or for |
| * checking the connection still works. |
| */ |
| static int probe_wait_ms = 500; |
| module_param(probe_wait_ms, int, 0644); |
| MODULE_PARM_DESC(probe_wait_ms, |
| "Maximum time(ms) to wait for probe response" |
| " before disconnecting (reason 4)."); |
| |
| /* |
| * How many Beacon frames need to have been used in average signal strength |
| * before starting to indicate signal change events. |
| */ |
| #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 |
| |
| /* |
| * We can have multiple work items (and connection probing) |
| * scheduling this timer, but we need to take care to only |
| * reschedule it when it should fire _earlier_ than it was |
| * asked for before, or if it's not pending right now. This |
| * function ensures that. Note that it then is required to |
| * run this function for all timeouts after the first one |
| * has happened -- the work that runs from this timer will |
| * do that. |
| */ |
| static void run_again(struct ieee80211_sub_if_data *sdata, |
| unsigned long timeout) |
| { |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (!timer_pending(&sdata->u.mgd.timer) || |
| time_before(timeout, sdata->u.mgd.timer.expires)) |
| mod_timer(&sdata->u.mgd.timer, timeout); |
| } |
| |
| void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) |
| { |
| if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) |
| return; |
| |
| if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| return; |
| |
| mod_timer(&sdata->u.mgd.bcn_mon_timer, |
| round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); |
| } |
| |
| void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| if (unlikely(!ifmgd->associated)) |
| return; |
| |
| if (ifmgd->probe_send_count) |
| ifmgd->probe_send_count = 0; |
| |
| if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| return; |
| |
| mod_timer(&ifmgd->conn_mon_timer, |
| round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); |
| } |
| |
| static int ecw2cw(int ecw) |
| { |
| return (1 << ecw) - 1; |
| } |
| |
| static enum ieee80211_conn_mode |
| ieee80211_determine_ap_chan(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| u32 vht_cap_info, |
| const struct ieee802_11_elems *elems, |
| bool ignore_ht_channel_mismatch, |
| const struct ieee80211_conn_settings *conn, |
| struct cfg80211_chan_def *chandef) |
| { |
| const struct ieee80211_ht_operation *ht_oper = elems->ht_operation; |
| const struct ieee80211_vht_operation *vht_oper = elems->vht_operation; |
| const struct ieee80211_he_operation *he_oper = elems->he_operation; |
| const struct ieee80211_eht_operation *eht_oper = elems->eht_operation; |
| struct ieee80211_supported_band *sband = |
| sdata->local->hw.wiphy->bands[channel->band]; |
| struct cfg80211_chan_def vht_chandef; |
| bool no_vht = false; |
| u32 ht_cfreq; |
| |
| *chandef = (struct cfg80211_chan_def) { |
| .chan = channel, |
| .width = NL80211_CHAN_WIDTH_20_NOHT, |
| .center_freq1 = channel->center_freq, |
| .freq1_offset = channel->freq_offset, |
| }; |
| |
| /* get special S1G case out of the way */ |
| if (sband->band == NL80211_BAND_S1GHZ) { |
| if (!ieee80211_chandef_s1g_oper(elems->s1g_oper, chandef)) { |
| sdata_info(sdata, |
| "Missing S1G Operation Element? Trying operating == primary\n"); |
| chandef->width = ieee80211_s1g_channel_width(channel); |
| } |
| |
| return IEEE80211_CONN_MODE_S1G; |
| } |
| |
| /* get special 6 GHz case out of the way */ |
| if (sband->band == NL80211_BAND_6GHZ) { |
| enum ieee80211_conn_mode mode = IEEE80211_CONN_MODE_EHT; |
| |
| /* this is an error */ |
| if (conn->mode < IEEE80211_CONN_MODE_HE) |
| return IEEE80211_CONN_MODE_LEGACY; |
| |
| if (!elems->he_6ghz_capa || !elems->he_cap) { |
| sdata_info(sdata, |
| "HE 6 GHz AP is missing HE/HE 6 GHz band capability\n"); |
| return IEEE80211_CONN_MODE_LEGACY; |
| } |
| |
| if (!eht_oper || !elems->eht_cap) { |
| eht_oper = NULL; |
| mode = IEEE80211_CONN_MODE_HE; |
| } |
| |
| if (!ieee80211_chandef_he_6ghz_oper(sdata->local, he_oper, |
| eht_oper, chandef)) { |
| sdata_info(sdata, "bad HE/EHT 6 GHz operation\n"); |
| return IEEE80211_CONN_MODE_LEGACY; |
| } |
| |
| return mode; |
| } |
| |
| /* now we have the progression HT, VHT, ... */ |
| if (conn->mode < IEEE80211_CONN_MODE_HT) |
| return IEEE80211_CONN_MODE_LEGACY; |
| |
| if (!ht_oper || !elems->ht_cap_elem) |
| return IEEE80211_CONN_MODE_LEGACY; |
| |
| chandef->width = NL80211_CHAN_WIDTH_20; |
| |
| ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, |
| channel->band); |
| /* check that channel matches the right operating channel */ |
| if (!ignore_ht_channel_mismatch && channel->center_freq != ht_cfreq) { |
| /* |
| * It's possible that some APs are confused here; |
| * Netgear WNDR3700 sometimes reports 4 higher than |
| * the actual channel in association responses, but |
| * since we look at probe response/beacon data here |
| * it should be OK. |
| */ |
| sdata_info(sdata, |
| "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", |
| channel->center_freq, ht_cfreq, |
| ht_oper->primary_chan, channel->band); |
| return IEEE80211_CONN_MODE_LEGACY; |
| } |
| |
| ieee80211_chandef_ht_oper(ht_oper, chandef); |
| |
| if (conn->mode < IEEE80211_CONN_MODE_VHT) |
| return IEEE80211_CONN_MODE_HT; |
| |
| vht_chandef = *chandef; |
| |
| /* |
| * having he_cap/he_oper parsed out implies we're at |
| * least operating as HE STA |
| */ |
| if (elems->he_cap && he_oper && |
| he_oper->he_oper_params & cpu_to_le32(IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { |
| struct ieee80211_vht_operation he_oper_vht_cap; |
| |
| /* |
| * Set only first 3 bytes (other 2 aren't used in |
| * ieee80211_chandef_vht_oper() anyway) |
| */ |
| memcpy(&he_oper_vht_cap, he_oper->optional, 3); |
| he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0); |
| |
| if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, |
| &he_oper_vht_cap, ht_oper, |
| &vht_chandef)) { |
| sdata_info(sdata, |
| "HE AP VHT information is invalid, disabling HE\n"); |
| /* this will cause us to re-parse as VHT STA */ |
| return IEEE80211_CONN_MODE_VHT; |
| } |
| } else if (!vht_oper || !elems->vht_cap_elem) { |
| if (sband->band == NL80211_BAND_5GHZ) { |
| sdata_info(sdata, |
| "VHT information is missing, disabling VHT\n"); |
| return IEEE80211_CONN_MODE_HT; |
| } |
| no_vht = true; |
| } else if (sband->band == NL80211_BAND_2GHZ) { |
| no_vht = true; |
| } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, |
| vht_cap_info, |
| vht_oper, ht_oper, |
| &vht_chandef)) { |
| sdata_info(sdata, |
| "AP VHT information is invalid, disabling VHT\n"); |
| return IEEE80211_CONN_MODE_HT; |
| } |
| |
| if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { |
| sdata_info(sdata, |
| "AP VHT information doesn't match HT, disabling VHT\n"); |
| return IEEE80211_CONN_MODE_HT; |
| } |
| |
| *chandef = vht_chandef; |
| |
| /* stick to current max mode if we or the AP don't have HE */ |
| if (conn->mode < IEEE80211_CONN_MODE_HE || |
| !elems->he_operation || !elems->he_cap) { |
| if (no_vht) |
| return IEEE80211_CONN_MODE_HT; |
| return IEEE80211_CONN_MODE_VHT; |
| } |
| |
| /* stick to HE if we or the AP don't have EHT */ |
| if (conn->mode < IEEE80211_CONN_MODE_EHT || |
| !eht_oper || !elems->eht_cap) |
| return IEEE80211_CONN_MODE_HE; |
| |
| /* |
| * handle the case that the EHT operation indicates that it holds EHT |
| * operation information (in case that the channel width differs from |
| * the channel width reported in HT/VHT/HE). |
| */ |
| if (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) { |
| struct cfg80211_chan_def eht_chandef = *chandef; |
| |
| ieee80211_chandef_eht_oper((const void *)eht_oper->optional, |
| &eht_chandef); |
| |
| eht_chandef.punctured = |
| ieee80211_eht_oper_dis_subchan_bitmap(eht_oper); |
| |
| if (!cfg80211_chandef_valid(&eht_chandef)) { |
| sdata_info(sdata, |
| "AP EHT information is invalid, disabling EHT\n"); |
| return IEEE80211_CONN_MODE_HE; |
| } |
| |
| if (!cfg80211_chandef_compatible(chandef, &eht_chandef)) { |
| sdata_info(sdata, |
| "AP EHT information doesn't match HT/VHT/HE, disabling EHT\n"); |
| return IEEE80211_CONN_MODE_HE; |
| } |
| |
| *chandef = eht_chandef; |
| } |
| |
| return IEEE80211_CONN_MODE_EHT; |
| } |
| |
| static bool |
| ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata, |
| const struct ieee80211_he_cap_elem *he_cap, |
| const struct ieee80211_he_operation *he_op) |
| { |
| struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp; |
| u16 mcs_80_map_tx, mcs_80_map_rx; |
| u16 ap_min_req_set; |
| int nss; |
| |
| if (!he_cap) |
| return false; |
| |
| /* mcs_nss is right after he_cap info */ |
| he_mcs_nss_supp = (void *)(he_cap + 1); |
| |
| mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80); |
| mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80); |
| |
| /* P802.11-REVme/D0.3 |
| * 27.1.1 Introduction to the HE PHY |
| * ... |
| * An HE STA shall support the following features: |
| * ... |
| * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all |
| * supported channel widths for HE SU PPDUs |
| */ |
| if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED || |
| (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) { |
| sdata_info(sdata, |
| "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n", |
| mcs_80_map_tx, mcs_80_map_rx); |
| return false; |
| } |
| |
| if (!he_op) |
| return true; |
| |
| ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); |
| |
| /* |
| * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all |
| * zeroes, which is nonsense, and completely inconsistent with itself |
| * (it doesn't have 8 streams). Accept the settings in this case anyway. |
| */ |
| if (!ap_min_req_set) |
| return true; |
| |
| /* make sure the AP is consistent with itself |
| * |
| * P802.11-REVme/D0.3 |
| * 26.17.1 Basic HE BSS operation |
| * |
| * A STA that is operating in an HE BSS shall be able to receive and |
| * transmit at each of the <HE-MCS, NSS> tuple values indicated by the |
| * Basic HE-MCS And NSS Set field of the HE Operation parameter of the |
| * MLME-START.request primitive and shall be able to receive at each of |
| * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and |
| * NSS Set field in the HE Capabilities parameter of the MLMESTART.request |
| * primitive |
| */ |
| for (nss = 8; nss > 0; nss--) { |
| u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; |
| u8 ap_rx_val; |
| u8 ap_tx_val; |
| |
| if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED) |
| continue; |
| |
| ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3; |
| ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3; |
| |
| if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || |
| ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || |
| ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) { |
| sdata_info(sdata, |
| "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n", |
| nss, ap_rx_val, ap_rx_val, ap_op_val); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool |
| ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| const struct ieee80211_he_operation *he_op) |
| { |
| const struct ieee80211_sta_he_cap *sta_he_cap = |
| ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); |
| u16 ap_min_req_set; |
| int i; |
| |
| if (!sta_he_cap || !he_op) |
| return false; |
| |
| ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); |
| |
| /* |
| * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all |
| * zeroes, which is nonsense, and completely inconsistent with itself |
| * (it doesn't have 8 streams). Accept the settings in this case anyway. |
| */ |
| if (!ap_min_req_set) |
| return true; |
| |
| /* Need to go over for 80MHz, 160MHz and for 80+80 */ |
| for (i = 0; i < 3; i++) { |
| const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = |
| &sta_he_cap->he_mcs_nss_supp; |
| u16 sta_mcs_map_rx = |
| le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); |
| u16 sta_mcs_map_tx = |
| le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); |
| u8 nss; |
| bool verified = true; |
| |
| /* |
| * For each band there is a maximum of 8 spatial streams |
| * possible. Each of the sta_mcs_map_* is a 16-bit struct built |
| * of 2 bits per NSS (1-8), with the values defined in enum |
| * ieee80211_he_mcs_support. Need to make sure STA TX and RX |
| * capabilities aren't less than the AP's minimum requirements |
| * for this HE BSS per SS. |
| * It is enough to find one such band that meets the reqs. |
| */ |
| for (nss = 8; nss > 0; nss--) { |
| u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; |
| u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; |
| u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; |
| |
| if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) |
| continue; |
| |
| /* |
| * Make sure the HE AP doesn't require MCSs that aren't |
| * supported by the client as required by spec |
| * |
| * P802.11-REVme/D0.3 |
| * 26.17.1 Basic HE BSS operation |
| * |
| * An HE STA shall not attempt to join * (MLME-JOIN.request primitive) |
| * a BSS, unless it supports (i.e., is able to both transmit and |
| * receive using) all of the <HE-MCS, NSS> tuples in the basic |
| * HE-MCS and NSS set. |
| */ |
| if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || |
| sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || |
| (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { |
| verified = false; |
| break; |
| } |
| } |
| |
| if (verified) |
| return true; |
| } |
| |
| /* If here, STA doesn't meet AP's HE min requirements */ |
| return false; |
| } |
| |
| static u8 |
| ieee80211_get_eht_cap_mcs_nss(const struct ieee80211_sta_he_cap *sta_he_cap, |
| const struct ieee80211_sta_eht_cap *sta_eht_cap, |
| unsigned int idx, int bw) |
| { |
| u8 he_phy_cap0 = sta_he_cap->he_cap_elem.phy_cap_info[0]; |
| u8 eht_phy_cap0 = sta_eht_cap->eht_cap_elem.phy_cap_info[0]; |
| |
| /* handle us being a 20 MHz-only EHT STA - with four values |
| * for MCS 0-7, 8-9, 10-11, 12-13. |
| */ |
| if (!(he_phy_cap0 & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL)) |
| return sta_eht_cap->eht_mcs_nss_supp.only_20mhz.rx_tx_max_nss[idx]; |
| |
| /* the others have MCS 0-9 together, rather than separately from 0-7 */ |
| if (idx > 0) |
| idx--; |
| |
| switch (bw) { |
| case 0: |
| return sta_eht_cap->eht_mcs_nss_supp.bw._80.rx_tx_max_nss[idx]; |
| case 1: |
| if (!(he_phy_cap0 & |
| (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G | |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G))) |
| return 0xff; /* pass check */ |
| return sta_eht_cap->eht_mcs_nss_supp.bw._160.rx_tx_max_nss[idx]; |
| case 2: |
| if (!(eht_phy_cap0 & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)) |
| return 0xff; /* pass check */ |
| return sta_eht_cap->eht_mcs_nss_supp.bw._320.rx_tx_max_nss[idx]; |
| } |
| |
| WARN_ON(1); |
| return 0; |
| } |
| |
| static bool |
| ieee80211_verify_sta_eht_mcs_support(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| const struct ieee80211_eht_operation *eht_op) |
| { |
| const struct ieee80211_sta_he_cap *sta_he_cap = |
| ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); |
| const struct ieee80211_sta_eht_cap *sta_eht_cap = |
| ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif); |
| const struct ieee80211_eht_mcs_nss_supp_20mhz_only *req; |
| unsigned int i; |
| |
| if (!sta_he_cap || !sta_eht_cap || !eht_op) |
| return false; |
| |
| req = &eht_op->basic_mcs_nss; |
| |
| for (i = 0; i < ARRAY_SIZE(req->rx_tx_max_nss); i++) { |
| u8 req_rx_nss, req_tx_nss; |
| unsigned int bw; |
| |
| req_rx_nss = u8_get_bits(req->rx_tx_max_nss[i], |
| IEEE80211_EHT_MCS_NSS_RX); |
| req_tx_nss = u8_get_bits(req->rx_tx_max_nss[i], |
| IEEE80211_EHT_MCS_NSS_TX); |
| |
| for (bw = 0; bw < 3; bw++) { |
| u8 have, have_rx_nss, have_tx_nss; |
| |
| have = ieee80211_get_eht_cap_mcs_nss(sta_he_cap, |
| sta_eht_cap, |
| i, bw); |
| have_rx_nss = u8_get_bits(have, |
| IEEE80211_EHT_MCS_NSS_RX); |
| have_tx_nss = u8_get_bits(have, |
| IEEE80211_EHT_MCS_NSS_TX); |
| |
| if (req_rx_nss > have_rx_nss || |
| req_tx_nss > have_tx_nss) |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool ieee80211_chandef_usable(struct ieee80211_sub_if_data *sdata, |
| const struct cfg80211_chan_def *chandef, |
| u32 prohibited_flags) |
| { |
| if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, |
| chandef, prohibited_flags)) |
| return false; |
| |
| if (chandef->punctured && |
| ieee80211_hw_check(&sdata->local->hw, DISALLOW_PUNCTURING)) |
| return false; |
| |
| return true; |
| } |
| |
| static struct ieee802_11_elems * |
| ieee80211_determine_chan_mode(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_conn_settings *conn, |
| struct cfg80211_bss *cbss, int link_id, |
| struct ieee80211_chan_req *chanreq) |
| { |
| const struct cfg80211_bss_ies *ies = rcu_dereference(cbss->ies); |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| struct ieee80211_channel *channel = cbss->channel; |
| struct ieee80211_elems_parse_params parse_params = { |
| .link_id = -1, |
| .from_ap = true, |
| .start = ies->data, |
| .len = ies->len, |
| .mode = conn->mode, |
| }; |
| struct ieee802_11_elems *elems; |
| struct ieee80211_supported_band *sband; |
| struct cfg80211_chan_def ap_chandef; |
| enum ieee80211_conn_mode ap_mode; |
| int ret; |
| |
| again: |
| elems = ieee802_11_parse_elems_full(&parse_params); |
| if (!elems) |
| return ERR_PTR(-ENOMEM); |
| |
| ap_mode = ieee80211_determine_ap_chan(sdata, channel, bss->vht_cap_info, |
| elems, false, conn, &ap_chandef); |
| |
| mlme_link_id_dbg(sdata, link_id, "determined AP %pM to be %s\n", |
| cbss->bssid, ieee80211_conn_mode_str(ap_mode)); |
| |
| /* this should be impossible since parsing depends on our mode */ |
| if (WARN_ON(ap_mode > conn->mode)) { |
| ret = -EINVAL; |
| goto free; |
| } |
| |
| sband = sdata->local->hw.wiphy->bands[channel->band]; |
| |
| switch (channel->band) { |
| case NL80211_BAND_S1GHZ: |
| if (WARN_ON(ap_mode != IEEE80211_CONN_MODE_S1G)) { |
| ret = -EINVAL; |
| goto free; |
| } |
| return elems; |
| case NL80211_BAND_6GHZ: |
| if (ap_mode < IEEE80211_CONN_MODE_HE) { |
| sdata_info(sdata, |
| "Rejecting non-HE 6/7 GHz connection"); |
| ret = -EINVAL; |
| goto free; |
| } |
| break; |
| default: |
| if (WARN_ON(ap_mode == IEEE80211_CONN_MODE_S1G)) { |
| ret = -EINVAL; |
| goto free; |
| } |
| } |
| |
| switch (ap_mode) { |
| case IEEE80211_CONN_MODE_S1G: |
| WARN_ON(1); |
| ret = -EINVAL; |
| goto free; |
| case IEEE80211_CONN_MODE_LEGACY: |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; |
| break; |
| case IEEE80211_CONN_MODE_HT: |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_40); |
| break; |
| case IEEE80211_CONN_MODE_VHT: |
| case IEEE80211_CONN_MODE_HE: |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_160); |
| break; |
| case IEEE80211_CONN_MODE_EHT: |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_320); |
| break; |
| } |
| |
| conn->mode = ap_mode; |
| chanreq->oper = ap_chandef; |
| |
| /* wider-bandwidth OFDMA is only done in EHT */ |
| if (conn->mode >= IEEE80211_CONN_MODE_EHT && |
| !(sdata->vif.driver_flags & IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW)) |
| chanreq->ap = ap_chandef; |
| else |
| chanreq->ap.chan = NULL; |
| |
| while (!ieee80211_chandef_usable(sdata, &chanreq->oper, |
| IEEE80211_CHAN_DISABLED)) { |
| if (WARN_ON(chanreq->oper.width == NL80211_CHAN_WIDTH_20_NOHT)) { |
| ret = -EINVAL; |
| goto free; |
| } |
| |
| ieee80211_chanreq_downgrade(chanreq, conn); |
| } |
| |
| if (conn->mode >= IEEE80211_CONN_MODE_HE && |
| !cfg80211_chandef_usable(sdata->wdev.wiphy, &chanreq->oper, |
| IEEE80211_CHAN_NO_HE)) { |
| conn->mode = IEEE80211_CONN_MODE_VHT; |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_160); |
| } |
| |
| if (conn->mode >= IEEE80211_CONN_MODE_EHT && |
| !cfg80211_chandef_usable(sdata->wdev.wiphy, &chanreq->oper, |
| IEEE80211_CHAN_NO_EHT)) { |
| conn->mode = IEEE80211_CONN_MODE_HE; |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_160); |
| } |
| |
| if (chanreq->oper.width != ap_chandef.width || ap_mode != conn->mode) |
| sdata_info(sdata, |
| "regulatory prevented using AP config, downgraded\n"); |
| |
| if (conn->mode >= IEEE80211_CONN_MODE_HE && |
| (!ieee80211_verify_peer_he_mcs_support(sdata, (void *)elems->he_cap, |
| elems->he_operation) || |
| !ieee80211_verify_sta_he_mcs_support(sdata, sband, |
| elems->he_operation))) { |
| conn->mode = IEEE80211_CONN_MODE_VHT; |
| sdata_info(sdata, "required MCSes not supported, disabling HE\n"); |
| } |
| |
| if (conn->mode >= IEEE80211_CONN_MODE_EHT && |
| !ieee80211_verify_sta_eht_mcs_support(sdata, sband, |
| elems->eht_operation)) { |
| conn->mode = IEEE80211_CONN_MODE_HE; |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_160); |
| sdata_info(sdata, "required MCSes not supported, disabling EHT\n"); |
| } |
| |
| /* the mode can only decrease, so this must terminate */ |
| if (ap_mode != conn->mode) |
| goto again; |
| |
| mlme_link_id_dbg(sdata, link_id, |
| "connecting with %s mode, max bandwidth %d MHz\n", |
| ieee80211_conn_mode_str(conn->mode), |
| 20 * (1 << conn->bw_limit)); |
| |
| if (WARN_ON_ONCE(!cfg80211_chandef_valid(&chanreq->oper))) { |
| ret = -EINVAL; |
| goto free; |
| } |
| |
| return elems; |
| free: |
| kfree(elems); |
| return ERR_PTR(ret); |
| } |
| |
| static int ieee80211_config_bw(struct ieee80211_link_data *link, |
| struct ieee802_11_elems *elems, |
| bool update, u64 *changed) |
| { |
| struct ieee80211_channel *channel = link->conf->chanreq.oper.chan; |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_chan_req chanreq = {}; |
| enum ieee80211_conn_mode ap_mode; |
| u32 vht_cap_info = 0; |
| u16 ht_opmode; |
| int ret; |
| |
| /* don't track any bandwidth changes in legacy/S1G modes */ |
| if (link->u.mgd.conn.mode == IEEE80211_CONN_MODE_LEGACY || |
| link->u.mgd.conn.mode == IEEE80211_CONN_MODE_S1G) |
| return 0; |
| |
| if (elems->vht_cap_elem) |
| vht_cap_info = le32_to_cpu(elems->vht_cap_elem->vht_cap_info); |
| |
| ap_mode = ieee80211_determine_ap_chan(sdata, channel, vht_cap_info, |
| elems, true, &link->u.mgd.conn, |
| &chanreq.ap); |
| |
| if (ap_mode != link->u.mgd.conn.mode) { |
| link_info(link, |
| "AP appears to change mode (expected %s, found %s), disconnect\n", |
| ieee80211_conn_mode_str(link->u.mgd.conn.mode), |
| ieee80211_conn_mode_str(ap_mode)); |
| return -EINVAL; |
| } |
| |
| chanreq.oper = chanreq.ap; |
| if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_EHT || |
| sdata->vif.driver_flags & IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW) |
| chanreq.ap.chan = NULL; |
| |
| /* |
| * if HT operation mode changed store the new one - |
| * this may be applicable even if channel is identical |
| */ |
| if (elems->ht_operation) { |
| ht_opmode = le16_to_cpu(elems->ht_operation->operation_mode); |
| if (link->conf->ht_operation_mode != ht_opmode) { |
| *changed |= BSS_CHANGED_HT; |
| link->conf->ht_operation_mode = ht_opmode; |
| } |
| } |
| |
| /* |
| * Downgrade the new channel if we associated with restricted |
| * bandwidth capabilities. For example, if we associated as a |
| * 20 MHz STA to a 40 MHz AP (due to regulatory, capabilities |
| * or config reasons) then switching to a 40 MHz channel now |
| * won't do us any good -- we couldn't use it with the AP. |
| */ |
| while (link->u.mgd.conn.bw_limit < |
| ieee80211_min_bw_limit_from_chandef(&chanreq.oper)) |
| ieee80211_chandef_downgrade(&chanreq.oper, NULL); |
| |
| if (ieee80211_chanreq_identical(&chanreq, &link->conf->chanreq)) |
| return 0; |
| |
| link_info(link, |
| "AP %pM changed bandwidth, new used config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n", |
| link->u.mgd.bssid, chanreq.oper.chan->center_freq, |
| chanreq.oper.chan->freq_offset, chanreq.oper.width, |
| chanreq.oper.center_freq1, chanreq.oper.freq1_offset, |
| chanreq.oper.center_freq2); |
| |
| if (!cfg80211_chandef_valid(&chanreq.oper)) { |
| sdata_info(sdata, |
| "AP %pM changed caps/bw in a way we can't support - disconnect\n", |
| link->u.mgd.bssid); |
| return -EINVAL; |
| } |
| |
| if (!update) { |
| link->conf->chanreq = chanreq; |
| return 0; |
| } |
| |
| /* |
| * We're tracking the current AP here, so don't do any further checks |
| * here. This keeps us from playing ping-pong with regulatory, without |
| * it the following can happen (for example): |
| * - connect to an AP with 80 MHz, world regdom allows 80 MHz |
| * - AP advertises regdom US |
| * - CRDA loads regdom US with 80 MHz prohibited (old database) |
| * - we detect an unsupported channel and disconnect |
| * - disconnect causes CRDA to reload world regdomain and the game |
| * starts anew. |
| * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) |
| * |
| * It seems possible that there are still scenarios with CSA or real |
| * bandwidth changes where a this could happen, but those cases are |
| * less common and wouldn't completely prevent using the AP. |
| */ |
| |
| ret = ieee80211_link_change_chanreq(link, &chanreq, changed); |
| if (ret) { |
| sdata_info(sdata, |
| "AP %pM changed bandwidth to incompatible one - disconnect\n", |
| link->u.mgd.bssid); |
| return ret; |
| } |
| |
| cfg80211_schedule_channels_check(&sdata->wdev); |
| return 0; |
| } |
| |
| /* frame sending functions */ |
| |
| static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u8 ap_ht_param, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_channel *channel, |
| enum ieee80211_smps_mode smps, |
| const struct ieee80211_conn_settings *conn) |
| { |
| u8 *pos; |
| u32 flags = channel->flags; |
| u16 cap; |
| struct ieee80211_sta_ht_cap ht_cap; |
| |
| BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); |
| |
| memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); |
| ieee80211_apply_htcap_overrides(sdata, &ht_cap); |
| |
| /* determine capability flags */ |
| cap = ht_cap.cap; |
| |
| switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { |
| case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: |
| if (flags & IEEE80211_CHAN_NO_HT40PLUS) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| break; |
| case IEEE80211_HT_PARAM_CHA_SEC_BELOW: |
| if (flags & IEEE80211_CHAN_NO_HT40MINUS) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| break; |
| } |
| |
| /* |
| * If 40 MHz was disabled associate as though we weren't |
| * capable of 40 MHz -- some broken APs will never fall |
| * back to trying to transmit in 20 MHz. |
| */ |
| if (conn->bw_limit <= IEEE80211_CONN_BW_LIMIT_20) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| |
| /* set SM PS mode properly */ |
| cap &= ~IEEE80211_HT_CAP_SM_PS; |
| switch (smps) { |
| case IEEE80211_SMPS_AUTOMATIC: |
| case IEEE80211_SMPS_NUM_MODES: |
| WARN_ON(1); |
| fallthrough; |
| case IEEE80211_SMPS_OFF: |
| cap |= WLAN_HT_CAP_SM_PS_DISABLED << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| case IEEE80211_SMPS_STATIC: |
| cap |= WLAN_HT_CAP_SM_PS_STATIC << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| case IEEE80211_SMPS_DYNAMIC: |
| cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| } |
| |
| /* reserve and fill IE */ |
| pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); |
| ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); |
| } |
| |
| /* This function determines vht capability flags for the association |
| * and builds the IE. |
| * Note - the function returns true to own the MU-MIMO capability |
| */ |
| static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_vht_cap *ap_vht_cap, |
| const struct ieee80211_conn_settings *conn) |
| { |
| struct ieee80211_local *local = sdata->local; |
| u8 *pos; |
| u32 cap; |
| struct ieee80211_sta_vht_cap vht_cap; |
| u32 mask, ap_bf_sts, our_bf_sts; |
| bool mu_mimo_owner = false; |
| |
| BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); |
| |
| memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); |
| ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); |
| |
| /* determine capability flags */ |
| cap = vht_cap.cap; |
| |
| if (conn->bw_limit <= IEEE80211_CONN_BW_LIMIT_80) { |
| cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; |
| cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| } |
| |
| /* |
| * Some APs apparently get confused if our capabilities are better |
| * than theirs, so restrict what we advertise in the assoc request. |
| */ |
| if (!(ap_vht_cap->vht_cap_info & |
| cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) |
| cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE); |
| else if (!(ap_vht_cap->vht_cap_info & |
| cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) |
| cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| |
| /* |
| * If some other vif is using the MU-MIMO capability we cannot associate |
| * using MU-MIMO - this will lead to contradictions in the group-id |
| * mechanism. |
| * Ownership is defined since association request, in order to avoid |
| * simultaneous associations with MU-MIMO. |
| */ |
| if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) { |
| bool disable_mu_mimo = false; |
| struct ieee80211_sub_if_data *other; |
| |
| list_for_each_entry_rcu(other, &local->interfaces, list) { |
| if (other->vif.bss_conf.mu_mimo_owner) { |
| disable_mu_mimo = true; |
| break; |
| } |
| } |
| if (disable_mu_mimo) |
| cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| else |
| mu_mimo_owner = true; |
| } |
| |
| mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; |
| |
| ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask; |
| our_bf_sts = cap & mask; |
| |
| if (ap_bf_sts < our_bf_sts) { |
| cap &= ~mask; |
| cap |= ap_bf_sts; |
| } |
| |
| /* reserve and fill IE */ |
| pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); |
| ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); |
| |
| return mu_mimo_owner; |
| } |
| |
| static void ieee80211_assoc_add_rates(struct sk_buff *skb, |
| enum nl80211_chan_width width, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_mgd_assoc_data *assoc_data) |
| { |
| u32 rates; |
| |
| if (assoc_data->supp_rates_len) { |
| /* |
| * Get all rates supported by the device and the AP as |
| * some APs don't like getting a superset of their rates |
| * in the association request (e.g. D-Link DAP 1353 in |
| * b-only mode)... |
| */ |
| ieee80211_parse_bitrates(width, sband, |
| assoc_data->supp_rates, |
| assoc_data->supp_rates_len, |
| &rates); |
| } else { |
| /* |
| * In case AP not provide any supported rates information |
| * before association, we send information element(s) with |
| * all rates that we support. |
| */ |
| rates = ~0; |
| } |
| |
| ieee80211_put_srates_elem(skb, sband, 0, 0, ~rates, |
| WLAN_EID_SUPP_RATES); |
| ieee80211_put_srates_elem(skb, sband, 0, 0, ~rates, |
| WLAN_EID_EXT_SUPP_RATES); |
| } |
| |
| static size_t ieee80211_add_before_ht_elems(struct sk_buff *skb, |
| const u8 *elems, |
| size_t elems_len, |
| size_t offset) |
| { |
| size_t noffset; |
| |
| static const u8 before_ht[] = { |
| WLAN_EID_SSID, |
| WLAN_EID_SUPP_RATES, |
| WLAN_EID_EXT_SUPP_RATES, |
| WLAN_EID_PWR_CAPABILITY, |
| WLAN_EID_SUPPORTED_CHANNELS, |
| WLAN_EID_RSN, |
| WLAN_EID_QOS_CAPA, |
| WLAN_EID_RRM_ENABLED_CAPABILITIES, |
| WLAN_EID_MOBILITY_DOMAIN, |
| WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */ |
| WLAN_EID_RIC_DATA, /* reassoc only */ |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| }; |
| static const u8 after_ric[] = { |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| WLAN_EID_HT_CAPABILITY, |
| WLAN_EID_BSS_COEX_2040, |
| /* luckily this is almost always there */ |
| WLAN_EID_EXT_CAPABILITY, |
| WLAN_EID_QOS_TRAFFIC_CAPA, |
| WLAN_EID_TIM_BCAST_REQ, |
| WLAN_EID_INTERWORKING, |
| /* 60 GHz (Multi-band, DMG, MMS) can't happen */ |
| WLAN_EID_VHT_CAPABILITY, |
| WLAN_EID_OPMODE_NOTIF, |
| }; |
| |
| if (!elems_len) |
| return offset; |
| |
| noffset = ieee80211_ie_split_ric(elems, elems_len, |
| before_ht, |
| ARRAY_SIZE(before_ht), |
| after_ric, |
| ARRAY_SIZE(after_ric), |
| offset); |
| skb_put_data(skb, elems + offset, noffset - offset); |
| |
| return noffset; |
| } |
| |
| static size_t ieee80211_add_before_vht_elems(struct sk_buff *skb, |
| const u8 *elems, |
| size_t elems_len, |
| size_t offset) |
| { |
| static const u8 before_vht[] = { |
| /* |
| * no need to list the ones split off before HT |
| * or generated here |
| */ |
| WLAN_EID_BSS_COEX_2040, |
| WLAN_EID_EXT_CAPABILITY, |
| WLAN_EID_QOS_TRAFFIC_CAPA, |
| WLAN_EID_TIM_BCAST_REQ, |
| WLAN_EID_INTERWORKING, |
| /* 60 GHz (Multi-band, DMG, MMS) can't happen */ |
| }; |
| size_t noffset; |
| |
| if (!elems_len) |
| return offset; |
| |
| /* RIC already taken care of in ieee80211_add_before_ht_elems() */ |
| noffset = ieee80211_ie_split(elems, elems_len, |
| before_vht, ARRAY_SIZE(before_vht), |
| offset); |
| skb_put_data(skb, elems + offset, noffset - offset); |
| |
| return noffset; |
| } |
| |
| static size_t ieee80211_add_before_he_elems(struct sk_buff *skb, |
| const u8 *elems, |
| size_t elems_len, |
| size_t offset) |
| { |
| static const u8 before_he[] = { |
| /* |
| * no need to list the ones split off before VHT |
| * or generated here |
| */ |
| WLAN_EID_OPMODE_NOTIF, |
| WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE, |
| /* 11ai elements */ |
| WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION, |
| WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY, |
| WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM, |
| WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER, |
| WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN, |
| /* TODO: add 11ah/11aj/11ak elements */ |
| }; |
| size_t noffset; |
| |
| if (!elems_len) |
| return offset; |
| |
| /* RIC already taken care of in ieee80211_add_before_ht_elems() */ |
| noffset = ieee80211_ie_split(elems, elems_len, |
| before_he, ARRAY_SIZE(before_he), |
| offset); |
| skb_put_data(skb, elems + offset, noffset - offset); |
| |
| return noffset; |
| } |
| |
| #define PRESENT_ELEMS_MAX 8 |
| #define PRESENT_ELEM_EXT_OFFS 0x100 |
| |
| static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u16 capab, |
| const struct element *ext_capa, |
| const u16 *present_elems); |
| |
| static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u16 *capab, |
| const struct element *ext_capa, |
| const u8 *extra_elems, |
| size_t extra_elems_len, |
| unsigned int link_id, |
| struct ieee80211_link_data *link, |
| u16 *present_elems) |
| { |
| enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; |
| struct ieee80211_channel *chan = cbss->channel; |
| const struct ieee80211_sband_iftype_data *iftd; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_supported_band *sband; |
| enum nl80211_chan_width width = NL80211_CHAN_WIDTH_20; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| enum ieee80211_smps_mode smps_mode; |
| u16 orig_capab = *capab; |
| size_t offset = 0; |
| int present_elems_len = 0; |
| u8 *pos; |
| int i; |
| |
| #define ADD_PRESENT_ELEM(id) do { \ |
| /* need a last for termination - we use 0 == SSID */ \ |
| if (!WARN_ON(present_elems_len >= PRESENT_ELEMS_MAX - 1)) \ |
| present_elems[present_elems_len++] = (id); \ |
| } while (0) |
| #define ADD_PRESENT_EXT_ELEM(id) ADD_PRESENT_ELEM(PRESENT_ELEM_EXT_OFFS | (id)) |
| |
| if (link) |
| smps_mode = link->smps_mode; |
| else if (sdata->u.mgd.powersave) |
| smps_mode = IEEE80211_SMPS_DYNAMIC; |
| else |
| smps_mode = IEEE80211_SMPS_OFF; |
| |
| if (link) { |
| /* |
| * 5/10 MHz scenarios are only viable without MLO, in which |
| * case this pointer should be used ... All of this is a bit |
| * unclear though, not sure this even works at all. |
| */ |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(link->conf->chanctx_conf); |
| if (chanctx_conf) |
| width = chanctx_conf->def.width; |
| rcu_read_unlock(); |
| } |
| |
| sband = local->hw.wiphy->bands[chan->band]; |
| iftd = ieee80211_get_sband_iftype_data(sband, iftype); |
| |
| if (sband->band == NL80211_BAND_2GHZ) { |
| *capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; |
| *capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; |
| } |
| |
| if ((cbss->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && |
| ieee80211_hw_check(&local->hw, SPECTRUM_MGMT)) |
| *capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; |
| |
| if (sband->band != NL80211_BAND_S1GHZ) |
| ieee80211_assoc_add_rates(skb, width, sband, assoc_data); |
| |
| if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT || |
| *capab & WLAN_CAPABILITY_RADIO_MEASURE) { |
| struct cfg80211_chan_def chandef = { |
| .width = width, |
| .chan = chan, |
| }; |
| |
| pos = skb_put(skb, 4); |
| *pos++ = WLAN_EID_PWR_CAPABILITY; |
| *pos++ = 2; |
| *pos++ = 0; /* min tx power */ |
| /* max tx power */ |
| *pos++ = ieee80211_chandef_max_power(&chandef); |
| ADD_PRESENT_ELEM(WLAN_EID_PWR_CAPABILITY); |
| } |
| |
| /* |
| * Per spec, we shouldn't include the list of channels if we advertise |
| * support for extended channel switching, but we've always done that; |
| * (for now?) apply this restriction only on the (new) 6 GHz band. |
| */ |
| if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT && |
| (sband->band != NL80211_BAND_6GHZ || |
| !ext_capa || ext_capa->datalen < 1 || |
| !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) { |
| /* TODO: get this in reg domain format */ |
| pos = skb_put(skb, 2 * sband->n_channels + 2); |
| *pos++ = WLAN_EID_SUPPORTED_CHANNELS; |
| *pos++ = 2 * sband->n_channels; |
| for (i = 0; i < sband->n_channels; i++) { |
| int cf = sband->channels[i].center_freq; |
| |
| *pos++ = ieee80211_frequency_to_channel(cf); |
| *pos++ = 1; /* one channel in the subband*/ |
| } |
| ADD_PRESENT_ELEM(WLAN_EID_SUPPORTED_CHANNELS); |
| } |
| |
| /* if present, add any custom IEs that go before HT */ |
| offset = ieee80211_add_before_ht_elems(skb, extra_elems, |
| extra_elems_len, |
| offset); |
| |
| if (sband->band != NL80211_BAND_6GHZ && |
| assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_HT) { |
| ieee80211_add_ht_ie(sdata, skb, |
| assoc_data->link[link_id].ap_ht_param, |
| sband, chan, smps_mode, |
| &assoc_data->link[link_id].conn); |
| ADD_PRESENT_ELEM(WLAN_EID_HT_CAPABILITY); |
| } |
| |
| /* if present, add any custom IEs that go before VHT */ |
| offset = ieee80211_add_before_vht_elems(skb, extra_elems, |
| extra_elems_len, |
| offset); |
| |
| if (sband->band != NL80211_BAND_6GHZ && |
| assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_VHT && |
| sband->vht_cap.vht_supported) { |
| bool mu_mimo_owner = |
| ieee80211_add_vht_ie(sdata, skb, sband, |
| &assoc_data->link[link_id].ap_vht_cap, |
| &assoc_data->link[link_id].conn); |
| |
| if (link) |
| link->conf->mu_mimo_owner = mu_mimo_owner; |
| ADD_PRESENT_ELEM(WLAN_EID_VHT_CAPABILITY); |
| } |
| |
| /* if present, add any custom IEs that go before HE */ |
| offset = ieee80211_add_before_he_elems(skb, extra_elems, |
| extra_elems_len, |
| offset); |
| |
| if (assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_HE) { |
| ieee80211_put_he_cap(skb, sdata, sband, |
| &assoc_data->link[link_id].conn); |
| ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_HE_CAPABILITY); |
| ieee80211_put_he_6ghz_cap(skb, sdata, smps_mode); |
| } |
| |
| /* |
| * careful - need to know about all the present elems before |
| * calling ieee80211_assoc_add_ml_elem(), so add this one if |
| * we're going to put it after the ML element |
| */ |
| if (assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_EHT) |
| ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_EHT_CAPABILITY); |
| |
| if (link_id == assoc_data->assoc_link_id) |
| ieee80211_assoc_add_ml_elem(sdata, skb, orig_capab, ext_capa, |
| present_elems); |
| |
| /* crash if somebody gets it wrong */ |
| present_elems = NULL; |
| |
| if (assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_EHT) |
| ieee80211_put_eht_cap(skb, sdata, sband, |
| &assoc_data->link[link_id].conn); |
| |
| if (sband->band == NL80211_BAND_S1GHZ) { |
| ieee80211_add_aid_request_ie(sdata, skb); |
| ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap, skb); |
| } |
| |
| if (iftd && iftd->vendor_elems.data && iftd->vendor_elems.len) |
| skb_put_data(skb, iftd->vendor_elems.data, iftd->vendor_elems.len); |
| |
| return offset; |
| } |
| |
| static void ieee80211_add_non_inheritance_elem(struct sk_buff *skb, |
| const u16 *outer, |
| const u16 *inner) |
| { |
| unsigned int skb_len = skb->len; |
| bool at_extension = false; |
| bool added = false; |
| int i, j; |
| u8 *len, *list_len = NULL; |
| |
| skb_put_u8(skb, WLAN_EID_EXTENSION); |
| len = skb_put(skb, 1); |
| skb_put_u8(skb, WLAN_EID_EXT_NON_INHERITANCE); |
| |
| for (i = 0; i < PRESENT_ELEMS_MAX && outer[i]; i++) { |
| u16 elem = outer[i]; |
| bool have_inner = false; |
| |
| /* should at least be sorted in the sense of normal -> ext */ |
| WARN_ON(at_extension && elem < PRESENT_ELEM_EXT_OFFS); |
| |
| /* switch to extension list */ |
| if (!at_extension && elem >= PRESENT_ELEM_EXT_OFFS) { |
| at_extension = true; |
| if (!list_len) |
| skb_put_u8(skb, 0); |
| list_len = NULL; |
| } |
| |
| for (j = 0; j < PRESENT_ELEMS_MAX && inner[j]; j++) { |
| if (elem == inner[j]) { |
| have_inner = true; |
| break; |
| } |
| } |
| |
| if (have_inner) |
| continue; |
| |
| if (!list_len) { |
| list_len = skb_put(skb, 1); |
| *list_len = 0; |
| } |
| *list_len += 1; |
| skb_put_u8(skb, (u8)elem); |
| added = true; |
| } |
| |
| /* if we added a list but no extension list, make a zero-len one */ |
| if (added && (!at_extension || !list_len)) |
| skb_put_u8(skb, 0); |
| |
| /* if nothing added remove extension element completely */ |
| if (!added) |
| skb_trim(skb, skb_len); |
| else |
| *len = skb->len - skb_len - 2; |
| } |
| |
| static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u16 capab, |
| const struct element *ext_capa, |
| const u16 *outer_present_elems) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| struct ieee80211_multi_link_elem *ml_elem; |
| struct ieee80211_mle_basic_common_info *common; |
| const struct wiphy_iftype_ext_capab *ift_ext_capa; |
| __le16 eml_capa = 0, mld_capa_ops = 0; |
| unsigned int link_id; |
| u8 *ml_elem_len; |
| void *capab_pos; |
| |
| if (!ieee80211_vif_is_mld(&sdata->vif)) |
| return; |
| |
| ift_ext_capa = cfg80211_get_iftype_ext_capa(local->hw.wiphy, |
| ieee80211_vif_type_p2p(&sdata->vif)); |
| if (ift_ext_capa) { |
| eml_capa = cpu_to_le16(ift_ext_capa->eml_capabilities); |
| mld_capa_ops = cpu_to_le16(ift_ext_capa->mld_capa_and_ops); |
| } |
| |
| skb_put_u8(skb, WLAN_EID_EXTENSION); |
| ml_elem_len = skb_put(skb, 1); |
| skb_put_u8(skb, WLAN_EID_EXT_EHT_MULTI_LINK); |
| ml_elem = skb_put(skb, sizeof(*ml_elem)); |
| ml_elem->control = |
| cpu_to_le16(IEEE80211_ML_CONTROL_TYPE_BASIC | |
| IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP); |
| common = skb_put(skb, sizeof(*common)); |
| common->len = sizeof(*common) + |
| 2; /* MLD capa/ops */ |
| memcpy(common->mld_mac_addr, sdata->vif.addr, ETH_ALEN); |
| |
| /* add EML_CAPA only if needed, see Draft P802.11be_D2.1, 35.3.17 */ |
| if (eml_capa & |
| cpu_to_le16((IEEE80211_EML_CAP_EMLSR_SUPP | |
| IEEE80211_EML_CAP_EMLMR_SUPPORT))) { |
| common->len += 2; /* EML capabilities */ |
| ml_elem->control |= |
| cpu_to_le16(IEEE80211_MLC_BASIC_PRES_EML_CAPA); |
| skb_put_data(skb, &eml_capa, sizeof(eml_capa)); |
| } |
| skb_put_data(skb, &mld_capa_ops, sizeof(mld_capa_ops)); |
| |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { |
| u16 link_present_elems[PRESENT_ELEMS_MAX] = {}; |
| const u8 *extra_elems; |
| size_t extra_elems_len; |
| size_t extra_used; |
| u8 *subelem_len = NULL; |
| __le16 ctrl; |
| |
| if (!assoc_data->link[link_id].bss || |
| link_id == assoc_data->assoc_link_id) |
| continue; |
| |
| extra_elems = assoc_data->link[link_id].elems; |
| extra_elems_len = assoc_data->link[link_id].elems_len; |
| |
| skb_put_u8(skb, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE); |
| subelem_len = skb_put(skb, 1); |
| |
| ctrl = cpu_to_le16(link_id | |
| IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE | |
| IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT); |
| skb_put_data(skb, &ctrl, sizeof(ctrl)); |
| skb_put_u8(skb, 1 + ETH_ALEN); /* STA Info Length */ |
| skb_put_data(skb, assoc_data->link[link_id].addr, |
| ETH_ALEN); |
| /* |
| * Now add the contents of the (re)association request, |
| * but the "listen interval" and "current AP address" |
| * (if applicable) are skipped. So we only have |
| * the capability field (remember the position and fill |
| * later), followed by the elements added below by |
| * calling ieee80211_assoc_link_elems(). |
| */ |
| capab_pos = skb_put(skb, 2); |
| |
| extra_used = ieee80211_assoc_link_elems(sdata, skb, &capab, |
| ext_capa, |
| extra_elems, |
| extra_elems_len, |
| link_id, NULL, |
| link_present_elems); |
| if (extra_elems) |
| skb_put_data(skb, extra_elems + extra_used, |
| extra_elems_len - extra_used); |
| |
| put_unaligned_le16(capab, capab_pos); |
| |
| ieee80211_add_non_inheritance_elem(skb, outer_present_elems, |
| link_present_elems); |
| |
| ieee80211_fragment_element(skb, subelem_len, |
| IEEE80211_MLE_SUBELEM_FRAGMENT); |
| } |
| |
| ieee80211_fragment_element(skb, ml_elem_len, WLAN_EID_FRAGMENT); |
| } |
| |
| static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| struct ieee80211_link_data *link; |
| struct sk_buff *skb; |
| struct ieee80211_mgmt *mgmt; |
| u8 *pos, qos_info, *ie_start; |
| size_t offset, noffset; |
| u16 capab = 0, link_capab; |
| __le16 listen_int; |
| struct element *ext_capa = NULL; |
| enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif); |
| struct ieee80211_prep_tx_info info = {}; |
| unsigned int link_id, n_links = 0; |
| u16 present_elems[PRESENT_ELEMS_MAX] = {}; |
| void *capab_pos; |
| size_t size; |
| int ret; |
| |
| /* we know it's writable, cast away the const */ |
| if (assoc_data->ie_len) |
| ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, |
| assoc_data->ie, |
| assoc_data->ie_len); |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| size = local->hw.extra_tx_headroom + |
| sizeof(*mgmt) + /* bit too much but doesn't matter */ |
| 2 + assoc_data->ssid_len + /* SSID */ |
| assoc_data->ie_len + /* extra IEs */ |
| (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) + |
| 9; /* WMM */ |
| |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { |
| struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; |
| const struct ieee80211_sband_iftype_data *iftd; |
| struct ieee80211_supported_band *sband; |
| |
| if (!cbss) |
| continue; |
| |
| sband = local->hw.wiphy->bands[cbss->channel->band]; |
| |
| n_links++; |
| /* add STA profile elements length */ |
| size += assoc_data->link[link_id].elems_len; |
| /* and supported rates length */ |
| size += 4 + sband->n_bitrates; |
| /* supported channels */ |
| size += 2 + 2 * sband->n_channels; |
| |
| iftd = ieee80211_get_sband_iftype_data(sband, iftype); |
| if (iftd) |
| size += iftd->vendor_elems.len; |
| |
| /* power capability */ |
| size += 4; |
| |
| /* HT, VHT, HE, EHT */ |
| size += 2 + sizeof(struct ieee80211_ht_cap); |
| size += 2 + sizeof(struct ieee80211_vht_cap); |
| size += 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + |
| sizeof(struct ieee80211_he_mcs_nss_supp) + |
| IEEE80211_HE_PPE_THRES_MAX_LEN; |
| |
| if (sband->band == NL80211_BAND_6GHZ) |
| size += 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa); |
| |
| size += 2 + 1 + sizeof(struct ieee80211_eht_cap_elem) + |
| sizeof(struct ieee80211_eht_mcs_nss_supp) + |
| IEEE80211_EHT_PPE_THRES_MAX_LEN; |
| |
| /* non-inheritance element */ |
| size += 2 + 2 + PRESENT_ELEMS_MAX; |
| |
| /* should be the same across all BSSes */ |
| if (cbss->capability & WLAN_CAPABILITY_PRIVACY) |
| capab |= WLAN_CAPABILITY_PRIVACY; |
| } |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) { |
| /* consider the multi-link element with STA profile */ |
| size += sizeof(struct ieee80211_multi_link_elem); |
| /* max common info field in basic multi-link element */ |
| size += sizeof(struct ieee80211_mle_basic_common_info) + |
| 2 + /* capa & op */ |
| 2; /* EML capa */ |
| |
| /* |
| * The capability elements were already considered above; |
| * note this over-estimates a bit because there's no |
| * STA profile for the assoc link. |
| */ |
| size += (n_links - 1) * |
| (1 + 1 + /* subelement ID/length */ |
| 2 + /* STA control */ |
| 1 + ETH_ALEN + 2 /* STA Info field */); |
| } |
| |
| link = sdata_dereference(sdata->link[assoc_data->assoc_link_id], sdata); |
| if (WARN_ON(!link)) |
| return -EINVAL; |
| |
| if (WARN_ON(!assoc_data->link[assoc_data->assoc_link_id].bss)) |
| return -EINVAL; |
| |
| skb = alloc_skb(size, GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM) |
| capab |= WLAN_CAPABILITY_RADIO_MEASURE; |
| |
| /* Set MBSSID support for HE AP if needed */ |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HE && |
| ext_capa && ext_capa->datalen >= 3) |
| ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; |
| |
| mgmt = skb_put_zero(skb, 24); |
| memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); |
| memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| |
| listen_int = cpu_to_le16(assoc_data->s1g ? |
| ieee80211_encode_usf(local->hw.conf.listen_interval) : |
| local->hw.conf.listen_interval); |
| if (!is_zero_ether_addr(assoc_data->prev_ap_addr)) { |
| skb_put(skb, 10); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_REASSOC_REQ); |
| capab_pos = &mgmt->u.reassoc_req.capab_info; |
| mgmt->u.reassoc_req.listen_interval = listen_int; |
| memcpy(mgmt->u.reassoc_req.current_ap, |
| assoc_data->prev_ap_addr, ETH_ALEN); |
| info.subtype = IEEE80211_STYPE_REASSOC_REQ; |
| } else { |
| skb_put(skb, 4); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_ASSOC_REQ); |
| capab_pos = &mgmt->u.assoc_req.capab_info; |
| mgmt->u.assoc_req.listen_interval = listen_int; |
| info.subtype = IEEE80211_STYPE_ASSOC_REQ; |
| } |
| |
| /* SSID */ |
| pos = skb_put(skb, 2 + assoc_data->ssid_len); |
| ie_start = pos; |
| *pos++ = WLAN_EID_SSID; |
| *pos++ = assoc_data->ssid_len; |
| memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); |
| |
| /* |
| * This bit is technically reserved, so it shouldn't matter for either |
| * the AP or us, but it also means we shouldn't set it. However, we've |
| * always set it in the past, and apparently some EHT APs check that |
| * we don't set it. To avoid interoperability issues with old APs that |
| * for some reason check it and want it to be set, set the bit for all |
| * pre-EHT connections as we used to do. |
| */ |
| if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_EHT) |
| capab |= WLAN_CAPABILITY_ESS; |
| |
| /* add the elements for the assoc (main) link */ |
| link_capab = capab; |
| offset = ieee80211_assoc_link_elems(sdata, skb, &link_capab, |
| ext_capa, |
| assoc_data->ie, |
| assoc_data->ie_len, |
| assoc_data->assoc_link_id, link, |
| present_elems); |
| put_unaligned_le16(link_capab, capab_pos); |
| |
| /* if present, add any custom non-vendor IEs */ |
| if (assoc_data->ie_len) { |
| noffset = ieee80211_ie_split_vendor(assoc_data->ie, |
| assoc_data->ie_len, |
| offset); |
| skb_put_data(skb, assoc_data->ie + offset, noffset - offset); |
| offset = noffset; |
| } |
| |
| if (assoc_data->wmm) { |
| if (assoc_data->uapsd) { |
| qos_info = ifmgd->uapsd_queues; |
| qos_info |= (ifmgd->uapsd_max_sp_len << |
| IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); |
| } else { |
| qos_info = 0; |
| } |
| |
| pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info); |
| } |
| |
| /* add any remaining custom (i.e. vendor specific here) IEs */ |
| if (assoc_data->ie_len) { |
| noffset = assoc_data->ie_len; |
| skb_put_data(skb, assoc_data->ie + offset, noffset - offset); |
| } |
| |
| if (assoc_data->fils_kek_len) { |
| ret = fils_encrypt_assoc_req(skb, assoc_data); |
| if (ret < 0) { |
| dev_kfree_skb(skb); |
| return ret; |
| } |
| } |
| |
| pos = skb_tail_pointer(skb); |
| kfree(ifmgd->assoc_req_ies); |
| ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC); |
| if (!ifmgd->assoc_req_ies) { |
| dev_kfree_skb(skb); |
| return -ENOMEM; |
| } |
| |
| ifmgd->assoc_req_ies_len = pos - ie_start; |
| |
| info.link_id = assoc_data->assoc_link_id; |
| drv_mgd_prepare_tx(local, sdata, &info); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_INTFL_MLME_CONN_TX; |
| ieee80211_tx_skb(sdata, skb); |
| |
| return 0; |
| } |
| |
| void ieee80211_send_pspoll(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_pspoll *pspoll; |
| struct sk_buff *skb; |
| |
| skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); |
| if (!skb) |
| return; |
| |
| pspoll = (struct ieee80211_pspoll *) skb->data; |
| pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| void ieee80211_send_nullfunc(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata, |
| bool powersave) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr_3addr *nullfunc; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, -1, |
| !ieee80211_hw_check(&local->hw, |
| DOESNT_SUPPORT_QOS_NDP)); |
| if (!skb) |
| return; |
| |
| nullfunc = (struct ieee80211_hdr_3addr *) skb->data; |
| if (powersave) |
| nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | |
| IEEE80211_TX_INTFL_OFFCHAN_TX_OK; |
| |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; |
| |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; |
| |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr *nullfunc; |
| __le16 fc; |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) |
| return; |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| nullfunc = skb_put_zero(skb, 30); |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | |
| IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); |
| nullfunc->frame_control = fc; |
| memcpy(nullfunc->addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN); |
| memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); |
| memcpy(nullfunc->addr3, sdata->deflink.u.mgd.bssid, ETH_ALEN); |
| memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| /* spectrum management related things */ |
| static void ieee80211_chswitch_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_link_data *link = |
| container_of(work, struct ieee80211_link_data, |
| u.mgd.chswitch_work.work); |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| int ret; |
| |
| if (!ieee80211_sdata_running(sdata)) |
| return; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (!ifmgd->associated) |
| return; |
| |
| if (!link->conf->csa_active) |
| return; |
| |
| /* |
| * using reservation isn't immediate as it may be deferred until later |
| * with multi-vif. once reservation is complete it will re-schedule the |
| * work with no reserved_chanctx so verify chandef to check if it |
| * completed successfully |
| */ |
| |
| if (link->reserved_chanctx) { |
| /* |
| * with multi-vif csa driver may call ieee80211_csa_finish() |
| * many times while waiting for other interfaces to use their |
| * reservations |
| */ |
| if (link->reserved_ready) |
| return; |
| |
| ret = ieee80211_link_use_reserved_context(link); |
| if (ret) { |
| sdata_info(sdata, |
| "failed to use reserved channel context, disconnecting (err=%d)\n", |
| ret); |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &ifmgd->csa_connection_drop_work); |
| } |
| return; |
| } |
| |
| if (!ieee80211_chanreq_identical(&link->conf->chanreq, |
| &link->csa_chanreq)) { |
| sdata_info(sdata, |
| "failed to finalize channel switch, disconnecting\n"); |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &ifmgd->csa_connection_drop_work); |
| return; |
| } |
| |
| link->u.mgd.csa_waiting_bcn = true; |
| |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| ieee80211_sta_reset_conn_monitor(sdata); |
| } |
| |
| static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| int ret; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| WARN_ON(!link->conf->csa_active); |
| |
| if (sdata->csa_blocked_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_blocked_tx = false; |
| } |
| |
| link->conf->csa_active = false; |
| link->u.mgd.csa_waiting_bcn = false; |
| |
| ret = drv_post_channel_switch(link); |
| if (ret) { |
| sdata_info(sdata, |
| "driver post channel switch failed, disconnecting\n"); |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &ifmgd->csa_connection_drop_work); |
| return; |
| } |
| |
| cfg80211_ch_switch_notify(sdata->dev, &link->reserved.oper, |
| link->link_id); |
| } |
| |
| void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success, |
| unsigned int link_id) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| trace_api_chswitch_done(sdata, success, link_id); |
| |
| rcu_read_lock(); |
| |
| if (!success) { |
| sdata_info(sdata, |
| "driver channel switch failed, disconnecting\n"); |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &sdata->u.mgd.csa_connection_drop_work); |
| } else { |
| struct ieee80211_link_data *link = |
| rcu_dereference(sdata->link[link_id]); |
| |
| if (WARN_ON(!link)) { |
| rcu_read_unlock(); |
| return; |
| } |
| |
| wiphy_delayed_work_queue(sdata->local->hw.wiphy, |
| &link->u.mgd.chswitch_work, 0); |
| } |
| |
| rcu_read_unlock(); |
| } |
| EXPORT_SYMBOL(ieee80211_chswitch_done); |
| |
| static void |
| ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (!local->ops->abort_channel_switch) |
| return; |
| |
| ieee80211_link_unreserve_chanctx(link); |
| |
| if (sdata->csa_blocked_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_blocked_tx = false; |
| } |
| |
| link->conf->csa_active = false; |
| |
| drv_abort_channel_switch(link); |
| } |
| |
| static void |
| ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, |
| u64 timestamp, u32 device_timestamp, |
| struct ieee802_11_elems *elems, |
| bool beacon) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct cfg80211_bss *cbss = link->conf->bss; |
| struct ieee80211_chanctx_conf *conf; |
| struct ieee80211_chanctx *chanctx; |
| enum nl80211_band current_band; |
| struct ieee80211_csa_ie csa_ie; |
| struct ieee80211_channel_switch ch_switch = { |
| .link_id = link->link_id, |
| }; |
| struct ieee80211_bss *bss; |
| unsigned long timeout; |
| int res; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (!cbss) |
| return; |
| |
| current_band = cbss->channel->band; |
| bss = (void *)cbss->priv; |
| res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, |
| bss->vht_cap_info, |
| &link->u.mgd.conn, |
| link->u.mgd.bssid, &csa_ie); |
| |
| if (!res) { |
| ch_switch.timestamp = timestamp; |
| ch_switch.device_timestamp = device_timestamp; |
| ch_switch.block_tx = csa_ie.mode; |
| ch_switch.chandef = csa_ie.chanreq.oper; |
| ch_switch.count = csa_ie.count; |
| ch_switch.delay = csa_ie.max_switch_time; |
| } |
| |
| if (res < 0) |
| goto drop_connection; |
| |
| if (link->conf->csa_active) { |
| /* already processing - disregard action frames */ |
| if (!beacon) |
| return; |
| |
| if (link->u.mgd.csa_waiting_bcn) { |
| ieee80211_chswitch_post_beacon(link); |
| /* |
| * If the CSA IE is still present in the beacon after |
| * the switch, we need to consider it as a new CSA |
| * (possibly to self) - this happens by not returning |
| * here so we'll get to the check below. |
| */ |
| } else if (res) { |
| ieee80211_sta_abort_chanswitch(link); |
| return; |
| } else { |
| drv_channel_switch_rx_beacon(sdata, &ch_switch); |
| return; |
| } |
| } |
| |
| /* nothing to do at all - no active CSA nor a new one */ |
| if (res) |
| return; |
| |
| if (link->conf->chanreq.oper.chan->band != |
| csa_ie.chanreq.oper.chan->band) { |
| sdata_info(sdata, |
| "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", |
| link->u.mgd.bssid, |
| csa_ie.chanreq.oper.chan->center_freq, |
| csa_ie.chanreq.oper.width, |
| csa_ie.chanreq.oper.center_freq1, |
| csa_ie.chanreq.oper.center_freq2); |
| goto drop_connection; |
| } |
| |
| if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chanreq.oper, |
| IEEE80211_CHAN_DISABLED)) { |
| sdata_info(sdata, |
| "AP %pM switches to unsupported channel " |
| "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), " |
| "disconnecting\n", |
| link->u.mgd.bssid, |
| csa_ie.chanreq.oper.chan->center_freq, |
| csa_ie.chanreq.oper.chan->freq_offset, |
| csa_ie.chanreq.oper.width, |
| csa_ie.chanreq.oper.center_freq1, |
| csa_ie.chanreq.oper.freq1_offset, |
| csa_ie.chanreq.oper.center_freq2); |
| goto drop_connection; |
| } |
| |
| if (cfg80211_chandef_identical(&csa_ie.chanreq.oper, |
| &link->conf->chanreq.oper) && |
| (!csa_ie.mode || !beacon)) { |
| if (link->u.mgd.csa_ignored_same_chan) |
| return; |
| sdata_info(sdata, |
| "AP %pM tries to chanswitch to same channel, ignore\n", |
| link->u.mgd.bssid); |
| link->u.mgd.csa_ignored_same_chan = true; |
| return; |
| } |
| |
| /* |
| * Drop all TDLS peers on the affected link - either we disconnect or |
| * move to a different channel from this point on. There's no telling |
| * what our peer will do. |
| * The TDLS WIDER_BW scenario is also problematic, as peers might now |
| * have an incompatible wider chandef. |
| */ |
| ieee80211_teardown_tdls_peers(link); |
| |
| conf = rcu_dereference_protected(link->conf->chanctx_conf, |
| lockdep_is_held(&local->hw.wiphy->mtx)); |
| if (!conf) { |
| sdata_info(sdata, |
| "no channel context assigned to vif?, disconnecting\n"); |
| goto drop_connection; |
| } |
| |
| chanctx = container_of(conf, struct ieee80211_chanctx, conf); |
| |
| if (!ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { |
| sdata_info(sdata, |
| "driver doesn't support chan-switch with channel contexts\n"); |
| goto drop_connection; |
| } |
| |
| if (drv_pre_channel_switch(sdata, &ch_switch)) { |
| sdata_info(sdata, |
| "preparing for channel switch failed, disconnecting\n"); |
| goto drop_connection; |
| } |
| |
| res = ieee80211_link_reserve_chanctx(link, &csa_ie.chanreq, |
| chanctx->mode, false); |
| if (res) { |
| sdata_info(sdata, |
| "failed to reserve channel context for channel switch, disconnecting (err=%d)\n", |
| res); |
| goto drop_connection; |
| } |
| |
| link->conf->csa_active = true; |
| link->csa_chanreq = csa_ie.chanreq; |
| link->u.mgd.csa_ignored_same_chan = false; |
| link->u.mgd.beacon_crc_valid = false; |
| |
| if (csa_ie.mode && |
| !ieee80211_hw_check(&local->hw, HANDLES_QUIET_CSA)) { |
| ieee80211_stop_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_blocked_tx = true; |
| } |
| |
| cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chanreq.oper, |
| link->link_id, csa_ie.count, |
| csa_ie.mode); |
| |
| if (local->ops->channel_switch) { |
| /* use driver's channel switch callback */ |
| drv_channel_switch(local, sdata, &ch_switch); |
| return; |
| } |
| |
| /* channel switch handled in software */ |
| timeout = TU_TO_JIFFIES((max_t(int, csa_ie.count, 1) - 1) * |
| cbss->beacon_interval); |
| wiphy_delayed_work_queue(local->hw.wiphy, |
| &link->u.mgd.chswitch_work, |
| timeout); |
| return; |
| drop_connection: |
| /* |
| * This is just so that the disconnect flow will know that |
| * we were trying to switch channel and failed. In case the |
| * mode is 1 (we are not allowed to Tx), we will know not to |
| * send a deauthentication frame. Those two fields will be |
| * reset when the disconnection worker runs. |
| */ |
| link->conf->csa_active = true; |
| sdata->csa_blocked_tx = |
| csa_ie.mode && !ieee80211_hw_check(&local->hw, HANDLES_QUIET_CSA); |
| |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &ifmgd->csa_connection_drop_work); |
| } |
| |
| static bool |
| ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| const u8 *country_ie, u8 country_ie_len, |
| const u8 *pwr_constr_elem, |
| int *chan_pwr, int *pwr_reduction) |
| { |
| struct ieee80211_country_ie_triplet *triplet; |
| int chan = ieee80211_frequency_to_channel(channel->center_freq); |
| int i, chan_increment; |
| bool have_chan_pwr = false; |
| |
| /* Invalid IE */ |
| if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) |
| return false; |
| |
| triplet = (void *)(country_ie + 3); |
| country_ie_len -= 3; |
| |
| switch (channel->band) { |
| default: |
| WARN_ON_ONCE(1); |
| fallthrough; |
| case NL80211_BAND_2GHZ: |
| case NL80211_BAND_60GHZ: |
| case NL80211_BAND_LC: |
| chan_increment = 1; |
| break; |
| case NL80211_BAND_5GHZ: |
| chan_increment = 4; |
| break; |
| case NL80211_BAND_6GHZ: |
| /* |
| * In the 6 GHz band, the "maximum transmit power level" |
| * field in the triplets is reserved, and thus will be |
| * zero and we shouldn't use it to control TX power. |
| * The actual TX power will be given in the transmit |
| * power envelope element instead. |
| */ |
| return false; |
| } |
| |
| /* find channel */ |
| while (country_ie_len >= 3) { |
| u8 first_channel = triplet->chans.first_channel; |
| |
| if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID) |
| goto next; |
| |
| for (i = 0; i < triplet->chans.num_channels; i++) { |
| if (first_channel + i * chan_increment == chan) { |
| have_chan_pwr = true; |
| *chan_pwr = triplet->chans.max_power; |
| break; |
| } |
| } |
| if (have_chan_pwr) |
| break; |
| |
| next: |
| triplet++; |
| country_ie_len -= 3; |
| } |
| |
| if (have_chan_pwr && pwr_constr_elem) |
| *pwr_reduction = *pwr_constr_elem; |
| else |
| *pwr_reduction = 0; |
| |
| return have_chan_pwr; |
| } |
| |
| static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| const u8 *cisco_dtpc_ie, |
| int *pwr_level) |
| { |
| /* From practical testing, the first data byte of the DTPC element |
| * seems to contain the requested dBm level, and the CLI on Cisco |
| * APs clearly state the range is -127 to 127 dBm, which indicates |
| * a signed byte, although it seemingly never actually goes negative. |
| * The other byte seems to always be zero. |
| */ |
| *pwr_level = (__s8)cisco_dtpc_ie[4]; |
| } |
| |
| static u64 ieee80211_handle_pwr_constr(struct ieee80211_link_data *link, |
| struct ieee80211_channel *channel, |
| struct ieee80211_mgmt *mgmt, |
| const u8 *country_ie, u8 country_ie_len, |
| const u8 *pwr_constr_ie, |
| const u8 *cisco_dtpc_ie) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| bool has_80211h_pwr = false, has_cisco_pwr = false; |
| int chan_pwr = 0, pwr_reduction_80211h = 0; |
| int pwr_level_cisco, pwr_level_80211h; |
| int new_ap_level; |
| __le16 capab = mgmt->u.probe_resp.capab_info; |
| |
| if (ieee80211_is_s1g_beacon(mgmt->frame_control)) |
| return 0; /* TODO */ |
| |
| if (country_ie && |
| (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) || |
| capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) { |
| has_80211h_pwr = ieee80211_find_80211h_pwr_constr( |
| sdata, channel, country_ie, country_ie_len, |
| pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); |
| pwr_level_80211h = |
| max_t(int, 0, chan_pwr - pwr_reduction_80211h); |
| } |
| |
| if (cisco_dtpc_ie) { |
| ieee80211_find_cisco_dtpc( |
| sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); |
| has_cisco_pwr = true; |
| } |
| |
| if (!has_80211h_pwr && !has_cisco_pwr) |
| return 0; |
| |
| /* If we have both 802.11h and Cisco DTPC, apply both limits |
| * by picking the smallest of the two power levels advertised. |
| */ |
| if (has_80211h_pwr && |
| (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { |
| new_ap_level = pwr_level_80211h; |
| |
| if (link->ap_power_level == new_ap_level) |
| return 0; |
| |
| sdata_dbg(sdata, |
| "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", |
| pwr_level_80211h, chan_pwr, pwr_reduction_80211h, |
| link->u.mgd.bssid); |
| } else { /* has_cisco_pwr is always true here. */ |
| new_ap_level = pwr_level_cisco; |
| |
| if (link->ap_power_level == new_ap_level) |
| return 0; |
| |
| sdata_dbg(sdata, |
| "Limiting TX power to %d dBm as advertised by %pM\n", |
| pwr_level_cisco, link->u.mgd.bssid); |
| } |
| |
| link->ap_power_level = new_ap_level; |
| if (__ieee80211_recalc_txpower(sdata)) |
| return BSS_CHANGED_TXPOWER; |
| return 0; |
| } |
| |
| /* powersave */ |
| static void ieee80211_enable_ps(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_conf *conf = &local->hw.conf; |
| |
| /* |
| * If we are scanning right now then the parameters will |
| * take effect when scan finishes. |
| */ |
| if (local->scanning) |
| return; |
| |
| if (conf->dynamic_ps_timeout > 0 && |
| !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies(conf->dynamic_ps_timeout)); |
| } else { |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) |
| ieee80211_send_nullfunc(local, sdata, true); |
| |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && |
| ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| return; |
| |
| conf->flags |= IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| } |
| |
| static void ieee80211_change_ps(struct ieee80211_local *local) |
| { |
| struct ieee80211_conf *conf = &local->hw.conf; |
| |
| if (local->ps_sdata) { |
| ieee80211_enable_ps(local, local->ps_sdata); |
| } else if (conf->flags & IEEE80211_CONF_PS) { |
| conf->flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| del_timer_sync(&local->dynamic_ps_timer); |
| wiphy_work_cancel(local->hw.wiphy, |
| &local->dynamic_ps_enable_work); |
| } |
| } |
| |
| static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *mgd = &sdata->u.mgd; |
| struct sta_info *sta = NULL; |
| bool authorized = false; |
| |
| if (!mgd->powersave) |
| return false; |
| |
| if (mgd->broken_ap) |
| return false; |
| |
| if (!mgd->associated) |
| return false; |
| |
| if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) |
| return false; |
| |
| if (!(local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) && |
| !sdata->deflink.u.mgd.have_beacon) |
| return false; |
| |
| rcu_read_lock(); |
| sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); |
| if (sta) |
| authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); |
| rcu_read_unlock(); |
| |
| return authorized; |
| } |
| |
| /* need to hold RTNL or interface lock */ |
| void ieee80211_recalc_ps(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata, *found = NULL; |
| int count = 0; |
| int timeout; |
| |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS) || |
| ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { |
| local->ps_sdata = NULL; |
| return; |
| } |
| |
| list_for_each_entry(sdata, &local->interfaces, list) { |
| if (!ieee80211_sdata_running(sdata)) |
| continue; |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { |
| /* If an AP vif is found, then disable PS |
| * by setting the count to zero thereby setting |
| * ps_sdata to NULL. |
| */ |
| count = 0; |
| break; |
| } |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) |
| continue; |
| found = sdata; |
| count++; |
| } |
| |
| if (count == 1 && ieee80211_powersave_allowed(found)) { |
| u8 dtimper = found->deflink.u.mgd.dtim_period; |
| |
| timeout = local->dynamic_ps_forced_timeout; |
| if (timeout < 0) |
| timeout = 100; |
| local->hw.conf.dynamic_ps_timeout = timeout; |
| |
| /* If the TIM IE is invalid, pretend the value is 1 */ |
| if (!dtimper) |
| dtimper = 1; |
| |
| local->hw.conf.ps_dtim_period = dtimper; |
| local->ps_sdata = found; |
| } else { |
| local->ps_sdata = NULL; |
| } |
| |
| ieee80211_change_ps(local); |
| } |
| |
| void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) |
| { |
| bool ps_allowed = ieee80211_powersave_allowed(sdata); |
| |
| if (sdata->vif.cfg.ps != ps_allowed) { |
| sdata->vif.cfg.ps = ps_allowed; |
| ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_PS); |
| } |
| } |
| |
| void ieee80211_dynamic_ps_disable_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, |
| dynamic_ps_disable_work); |
| |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| |
| ieee80211_wake_queues_by_reason(&local->hw, |
| IEEE80211_MAX_QUEUE_MAP, |
| IEEE80211_QUEUE_STOP_REASON_PS, |
| false); |
| } |
| |
| void ieee80211_dynamic_ps_enable_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, |
| dynamic_ps_enable_work); |
| struct ieee80211_sub_if_data *sdata = local->ps_sdata; |
| struct ieee80211_if_managed *ifmgd; |
| unsigned long flags; |
| int q; |
| |
| /* can only happen when PS was just disabled anyway */ |
| if (!sdata) |
| return; |
| |
| ifmgd = &sdata->u.mgd; |
| |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) |
| return; |
| |
| if (local->hw.conf.dynamic_ps_timeout > 0) { |
| /* don't enter PS if TX frames are pending */ |
| if (drv_tx_frames_pending(local)) { |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies( |
| local->hw.conf.dynamic_ps_timeout)); |
| return; |
| } |
| |
| /* |
| * transmission can be stopped by others which leads to |
| * dynamic_ps_timer expiry. Postpone the ps timer if it |
| * is not the actual idle state. |
| */ |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); |
| for (q = 0; q < local->hw.queues; q++) { |
| if (local->queue_stop_reasons[q]) { |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, |
| flags); |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies( |
| local->hw.conf.dynamic_ps_timeout)); |
| return; |
| } |
| } |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); |
| } |
| |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && |
| !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { |
| if (drv_tx_frames_pending(local)) { |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies( |
| local->hw.conf.dynamic_ps_timeout)); |
| } else { |
| ieee80211_send_nullfunc(local, sdata, true); |
| /* Flush to get the tx status of nullfunc frame */ |
| ieee80211_flush_queues(local, sdata, false); |
| } |
| } |
| |
| if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && |
| ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) || |
| (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { |
| ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; |
| local->hw.conf.flags |= IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| } |
| |
| void ieee80211_dynamic_ps_timer(struct timer_list *t) |
| { |
| struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer); |
| |
| wiphy_work_queue(local->hw.wiphy, &local->dynamic_ps_enable_work); |
| } |
| |
| void ieee80211_dfs_cac_timer_work(struct wiphy *wiphy, struct wiphy_work *work) |
| { |
| struct ieee80211_link_data *link = |
| container_of(work, struct ieee80211_link_data, |
| dfs_cac_timer_work.work); |
| struct cfg80211_chan_def chandef = link->conf->chanreq.oper; |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (sdata->wdev.cac_started) { |
| ieee80211_link_release_channel(link); |
| cfg80211_cac_event(sdata->dev, &chandef, |
| NL80211_RADAR_CAC_FINISHED, |
| GFP_KERNEL); |
| } |
| } |
| |
| static bool |
| __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| bool ret = false; |
| int ac; |
| |
| if (local->hw.queues < IEEE80211_NUM_ACS) |
| return false; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; |
| int non_acm_ac; |
| unsigned long now = jiffies; |
| |
| if (tx_tspec->action == TX_TSPEC_ACTION_NONE && |
| tx_tspec->admitted_time && |
| time_after(now, tx_tspec->time_slice_start + HZ)) { |
| tx_tspec->consumed_tx_time = 0; |
| tx_tspec->time_slice_start = now; |
| |
| if (tx_tspec->downgraded) |
| tx_tspec->action = |
| TX_TSPEC_ACTION_STOP_DOWNGRADE; |
| } |
| |
| switch (tx_tspec->action) { |
| case TX_TSPEC_ACTION_STOP_DOWNGRADE: |
| /* take the original parameters */ |
| if (drv_conf_tx(local, &sdata->deflink, ac, |
| &sdata->deflink.tx_conf[ac])) |
| link_err(&sdata->deflink, |
| "failed to set TX queue parameters for queue %d\n", |
| ac); |
| tx_tspec->action = TX_TSPEC_ACTION_NONE; |
| tx_tspec->downgraded = false; |
| ret = true; |
| break; |
| case TX_TSPEC_ACTION_DOWNGRADE: |
| if (time_after(now, tx_tspec->time_slice_start + HZ)) { |
| tx_tspec->action = TX_TSPEC_ACTION_NONE; |
| ret = true; |
| break; |
| } |
| /* downgrade next lower non-ACM AC */ |
| for (non_acm_ac = ac + 1; |
| non_acm_ac < IEEE80211_NUM_ACS; |
| non_acm_ac++) |
| if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac))) |
| break; |
| /* Usually the loop will result in using BK even if it |
| * requires admission control, but such a configuration |
| * makes no sense and we have to transmit somehow - the |
| * AC selection does the same thing. |
| * If we started out trying to downgrade from BK, then |
| * the extra condition here might be needed. |
| */ |
| if (non_acm_ac >= IEEE80211_NUM_ACS) |
| non_acm_ac = IEEE80211_AC_BK; |
| if (drv_conf_tx(local, &sdata->deflink, ac, |
| &sdata->deflink.tx_conf[non_acm_ac])) |
| link_err(&sdata->deflink, |
| "failed to set TX queue parameters for queue %d\n", |
| ac); |
| tx_tspec->action = TX_TSPEC_ACTION_NONE; |
| ret = true; |
| wiphy_delayed_work_queue(local->hw.wiphy, |
| &ifmgd->tx_tspec_wk, |
| tx_tspec->time_slice_start + |
| HZ - now + 1); |
| break; |
| case TX_TSPEC_ACTION_NONE: |
| /* nothing now */ |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) |
| { |
| if (__ieee80211_sta_handle_tspec_ac_params(sdata)) |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, |
| BSS_CHANGED_QOS); |
| } |
| |
| static void ieee80211_sta_handle_tspec_ac_params_wk(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| sdata = container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.tx_tspec_wk.work); |
| ieee80211_sta_handle_tspec_ac_params(sdata); |
| } |
| |
| void ieee80211_mgd_set_link_qos_params(struct ieee80211_link_data *link) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_tx_queue_params *params = link->tx_conf; |
| u8 ac; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| mlme_dbg(sdata, |
| "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", |
| ac, params[ac].acm, |
| params[ac].aifs, params[ac].cw_min, params[ac].cw_max, |
| params[ac].txop, params[ac].uapsd, |
| ifmgd->tx_tspec[ac].downgraded); |
| if (!ifmgd->tx_tspec[ac].downgraded && |
| drv_conf_tx(local, link, ac, ¶ms[ac])) |
| link_err(link, |
| "failed to set TX queue parameters for AC %d\n", |
| ac); |
| } |
| } |
| |
| /* MLME */ |
| static bool |
| ieee80211_sta_wmm_params(struct ieee80211_local *local, |
| struct ieee80211_link_data *link, |
| const u8 *wmm_param, size_t wmm_param_len, |
| const struct ieee80211_mu_edca_param_set *mu_edca) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS]; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| size_t left; |
| int count, mu_edca_count, ac; |
| const u8 *pos; |
| u8 uapsd_queues = 0; |
| |
| if (!local->ops->conf_tx) |
| return false; |
| |
| if (local->hw.queues < IEEE80211_NUM_ACS) |
| return false; |
| |
| if (!wmm_param) |
| return false; |
| |
| if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) |
| return false; |
| |
| if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) |
| uapsd_queues = ifmgd->uapsd_queues; |
| |
| count = wmm_param[6] & 0x0f; |
| /* -1 is the initial value of ifmgd->mu_edca_last_param_set. |
| * if mu_edca was preset before and now it disappeared tell |
| * the driver about it. |
| */ |
| mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1; |
| if (count == link->u.mgd.wmm_last_param_set && |
| mu_edca_count == link->u.mgd.mu_edca_last_param_set) |
| return false; |
| link->u.mgd.wmm_last_param_set = count; |
| link->u.mgd.mu_edca_last_param_set = mu_edca_count; |
| |
| pos = wmm_param + 8; |
| left = wmm_param_len - 8; |
| |
| memset(¶ms, 0, sizeof(params)); |
| |
| sdata->wmm_acm = 0; |
| for (; left >= 4; left -= 4, pos += 4) { |
| int aci = (pos[0] >> 5) & 0x03; |
| int acm = (pos[0] >> 4) & 0x01; |
| bool uapsd = false; |
| |
| switch (aci) { |
| case 1: /* AC_BK */ |
| ac = IEEE80211_AC_BK; |
| if (acm) |
| sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) |
| uapsd = true; |
| params[ac].mu_edca = !!mu_edca; |
| if (mu_edca) |
| params[ac].mu_edca_param_rec = mu_edca->ac_bk; |
| break; |
| case 2: /* AC_VI */ |
| ac = IEEE80211_AC_VI; |
| if (acm) |
| sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) |
| uapsd = true; |
| params[ac].mu_edca = !!mu_edca; |
| if (mu_edca) |
| params[ac].mu_edca_param_rec = mu_edca->ac_vi; |
| break; |
| case 3: /* AC_VO */ |
| ac = IEEE80211_AC_VO; |
| if (acm) |
| sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) |
| uapsd = true; |
| params[ac].mu_edca = !!mu_edca; |
| if (mu_edca) |
| params[ac].mu_edca_param_rec = mu_edca->ac_vo; |
| break; |
| case 0: /* AC_BE */ |
| default: |
| ac = IEEE80211_AC_BE; |
| if (acm) |
| sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) |
| uapsd = true; |
| params[ac].mu_edca = !!mu_edca; |
| if (mu_edca) |
| params[ac].mu_edca_param_rec = mu_edca->ac_be; |
| break; |
| } |
| |
| params[ac].aifs = pos[0] & 0x0f; |
| |
| if (params[ac].aifs < 2) { |
| link_info(link, |
| "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n", |
| params[ac].aifs, aci); |
| params[ac].aifs = 2; |
| } |
| params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4); |
| params[ac].cw_min = ecw2cw(pos[1] & 0x0f); |
| params[ac].txop = get_unaligned_le16(pos + 2); |
| params[ac].acm = acm; |
| params[ac].uapsd = uapsd; |
| |
| if (params[ac].cw_min == 0 || |
| params[ac].cw_min > params[ac].cw_max) { |
| link_info(link, |
| "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", |
| params[ac].cw_min, params[ac].cw_max, aci); |
| return false; |
| } |
| ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac); |
| } |
| |
| /* WMM specification requires all 4 ACIs. */ |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| if (params[ac].cw_min == 0) { |
| link_info(link, |
| "AP has invalid WMM params (missing AC %d), using defaults\n", |
| ac); |
| return false; |
| } |
| } |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| link->tx_conf[ac] = params[ac]; |
| |
| ieee80211_mgd_set_link_qos_params(link); |
| |
| /* enable WMM or activate new settings */ |
| link->conf->qos = true; |
| return true; |
| } |
| |
| static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) |
| { |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; |
| ieee80211_run_deferred_scan(sdata->local); |
| } |
| |
| static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) |
| { |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| __ieee80211_stop_poll(sdata); |
| } |
| |
| static u64 ieee80211_handle_bss_capability(struct ieee80211_link_data *link, |
| u16 capab, bool erp_valid, u8 erp) |
| { |
| struct ieee80211_bss_conf *bss_conf = link->conf; |
| struct ieee80211_supported_band *sband; |
| u64 changed = 0; |
| bool use_protection; |
| bool use_short_preamble; |
| bool use_short_slot; |
| |
| sband = ieee80211_get_link_sband(link); |
| if (!sband) |
| return changed; |
| |
| if (erp_valid) { |
| use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; |
| use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; |
| } else { |
| use_protection = false; |
| use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); |
| } |
| |
| use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); |
| if (sband->band == NL80211_BAND_5GHZ || |
| sband->band == NL80211_BAND_6GHZ) |
| use_short_slot = true; |
| |
| if (use_protection != bss_conf->use_cts_prot) { |
| bss_conf->use_cts_prot = use_protection; |
| changed |= BSS_CHANGED_ERP_CTS_PROT; |
| } |
| |
| if (use_short_preamble != bss_conf->use_short_preamble) { |
| bss_conf->use_short_preamble = use_short_preamble; |
| changed |= BSS_CHANGED_ERP_PREAMBLE; |
| } |
| |
| if (use_short_slot != bss_conf->use_short_slot) { |
| bss_conf->use_short_slot = use_short_slot; |
| changed |= BSS_CHANGED_ERP_SLOT; |
| } |
| |
| return changed; |
| } |
| |
| static u64 ieee80211_link_set_associated(struct ieee80211_link_data *link, |
| struct cfg80211_bss *cbss) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_bss_conf *bss_conf = link->conf; |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| u64 changed = BSS_CHANGED_QOS; |
| |
| /* not really used in MLO */ |
| sdata->u.mgd.beacon_timeout = |
| usecs_to_jiffies(ieee80211_tu_to_usec(beacon_loss_count * |
| bss_conf->beacon_int)); |
| |
| changed |= ieee80211_handle_bss_capability(link, |
| bss_conf->assoc_capability, |
| bss->has_erp_value, |
| bss->erp_value); |
| |
| ieee80211_check_rate_mask(link); |
| |
| link->conf->bss = cbss; |
| memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN); |
| |
| if (sdata->vif.p2p || |
| sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { |
| const struct cfg80211_bss_ies *ies; |
| |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->ies); |
| if (ies) { |
| int ret; |
| |
| ret = cfg80211_get_p2p_attr( |
| ies->data, ies->len, |
| IEEE80211_P2P_ATTR_ABSENCE_NOTICE, |
| (u8 *) &bss_conf->p2p_noa_attr, |
| sizeof(bss_conf->p2p_noa_attr)); |
| if (ret >= 2) { |
| link->u.mgd.p2p_noa_index = |
| bss_conf->p2p_noa_attr.index; |
| changed |= BSS_CHANGED_P2P_PS; |
| } |
| } |
| rcu_read_unlock(); |
| } |
| |
| if (link->u.mgd.have_beacon) { |
| bss_conf->beacon_rate = bss->beacon_rate; |
| changed |= BSS_CHANGED_BEACON_INFO; |
| } else { |
| bss_conf->beacon_rate = NULL; |
| } |
| |
| /* Tell the driver to monitor connection quality (if supported) */ |
| if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && |
| bss_conf->cqm_rssi_thold) |
| changed |= BSS_CHANGED_CQM; |
| |
| return changed; |
| } |
| |
| static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgd_assoc_data *assoc_data, |
| u64 changed[IEEE80211_MLD_MAX_NUM_LINKS]) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; |
| u64 vif_changed = BSS_CHANGED_ASSOC; |
| unsigned int link_id; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| sdata->u.mgd.associated = true; |
| |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { |
| struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; |
| struct ieee80211_link_data *link; |
| |
| if (!cbss || |
| assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) |
| continue; |
| |
| if (ieee80211_vif_is_mld(&sdata->vif) && |
| !(ieee80211_vif_usable_links(&sdata->vif) & BIT(link_id))) |
| continue; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (WARN_ON(!link)) |
| return; |
| |
| changed[link_id] |= ieee80211_link_set_associated(link, cbss); |
| } |
| |
| /* just to be sure */ |
| ieee80211_stop_poll(sdata); |
| |
| ieee80211_led_assoc(local, 1); |
| |
| vif_cfg->assoc = 1; |
| |
| /* Enable ARP filtering */ |
| if (vif_cfg->arp_addr_cnt) |
| vif_changed |= BSS_CHANGED_ARP_FILTER; |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) { |
| for (link_id = 0; |
| link_id < IEEE80211_MLD_MAX_NUM_LINKS; |
| link_id++) { |
| struct ieee80211_link_data *link; |
| struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; |
| |
| if (!cbss || |
| !(BIT(link_id) & |
| ieee80211_vif_usable_links(&sdata->vif)) || |
| assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) |
| continue; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (WARN_ON(!link)) |
| return; |
| |
| ieee80211_link_info_change_notify(sdata, link, |
| changed[link_id]); |
| |
| ieee80211_recalc_smps(sdata, link); |
| } |
| |
| ieee80211_vif_cfg_change_notify(sdata, vif_changed); |
| } else { |
| ieee80211_bss_info_change_notify(sdata, |
| vif_changed | changed[0]); |
| } |
| |
| ieee80211_recalc_ps(local); |
| |
| /* leave this here to not change ordering in non-MLO cases */ |
| if (!ieee80211_vif_is_mld(&sdata->vif)) |
| ieee80211_recalc_smps(sdata, &sdata->deflink); |
| ieee80211_recalc_ps_vif(sdata); |
| |
| netif_carrier_on(sdata->dev); |
| } |
| |
| static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, |
| u16 stype, u16 reason, bool tx, |
| u8 *frame_buf) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| unsigned int link_id; |
| u64 changed = 0; |
| struct ieee80211_prep_tx_info info = { |
| .subtype = stype, |
| }; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (WARN_ON_ONCE(tx && !frame_buf)) |
| return; |
| |
| if (WARN_ON(!ifmgd->associated)) |
| return; |
| |
| ieee80211_stop_poll(sdata); |
| |
| ifmgd->associated = false; |
| |
| /* other links will be destroyed */ |
| sdata->deflink.conf->bss = NULL; |
| sdata->deflink.smps_mode = IEEE80211_SMPS_OFF; |
| |
| netif_carrier_off(sdata->dev); |
| |
| /* |
| * if we want to get out of ps before disassoc (why?) we have |
| * to do it before sending disassoc, as otherwise the null-packet |
| * won't be valid. |
| */ |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| local->ps_sdata = NULL; |
| |
| /* disable per-vif ps */ |
| ieee80211_recalc_ps_vif(sdata); |
| |
| /* make sure ongoing transmission finishes */ |
| synchronize_net(); |
| |
| /* |
| * drop any frame before deauth/disassoc, this can be data or |
| * management frame. Since we are disconnecting, we should not |
| * insist sending these frames which can take time and delay |
| * the disconnection and possible the roaming. |
| */ |
| if (tx) |
| ieee80211_flush_queues(local, sdata, true); |
| |
| /* deauthenticate/disassociate now */ |
| if (tx || frame_buf) { |
| /* |
| * In multi channel scenarios guarantee that the virtual |
| * interface is granted immediate airtime to transmit the |
| * deauthentication frame by calling mgd_prepare_tx, if the |
| * driver requested so. |
| */ |
| if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP)) { |
| for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); |
| link_id++) { |
| struct ieee80211_link_data *link; |
| |
| link = sdata_dereference(sdata->link[link_id], |
| sdata); |
| if (!link) |
| continue; |
| if (link->u.mgd.have_beacon) |
| break; |
| } |
| if (link_id == IEEE80211_MLD_MAX_NUM_LINKS) { |
| info.link_id = ffs(sdata->vif.active_links) - 1; |
| drv_mgd_prepare_tx(sdata->local, sdata, &info); |
| } |
| } |
| |
| ieee80211_send_deauth_disassoc(sdata, sdata->vif.cfg.ap_addr, |
| sdata->vif.cfg.ap_addr, stype, |
| reason, tx, frame_buf); |
| } |
| |
| /* flush out frame - make sure the deauth was actually sent */ |
| if (tx) |
| ieee80211_flush_queues(local, sdata, false); |
| |
| drv_mgd_complete_tx(sdata->local, sdata, &info); |
| |
| /* clear AP addr only after building the needed mgmt frames */ |
| eth_zero_addr(sdata->deflink.u.mgd.bssid); |
| eth_zero_addr(sdata->vif.cfg.ap_addr); |
| |
| sdata->vif.cfg.ssid_len = 0; |
| |
| /* remove AP and TDLS peers */ |
| sta_info_flush(sdata, -1); |
| |
| /* finally reset all BSS / config parameters */ |
| if (!ieee80211_vif_is_mld(&sdata->vif)) |
| changed |= ieee80211_reset_erp_info(sdata); |
| |
| ieee80211_led_assoc(local, 0); |
| changed |= BSS_CHANGED_ASSOC; |
| sdata->vif.cfg.assoc = false; |
| |
| sdata->deflink.u.mgd.p2p_noa_index = -1; |
| memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, |
| sizeof(sdata->vif.bss_conf.p2p_noa_attr)); |
| |
| /* on the next assoc, re-program HT/VHT parameters */ |
| memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); |
| memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); |
| memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa)); |
| memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask)); |
| |
| /* |
| * reset MU-MIMO ownership and group data in default link, |
| * if used, other links are destroyed |
| */ |
| memset(sdata->vif.bss_conf.mu_group.membership, 0, |
| sizeof(sdata->vif.bss_conf.mu_group.membership)); |
| memset(sdata->vif.bss_conf.mu_group.position, 0, |
| sizeof(sdata->vif.bss_conf.mu_group.position)); |
| if (!ieee80211_vif_is_mld(&sdata->vif)) |
| changed |= BSS_CHANGED_MU_GROUPS; |
| sdata->vif.bss_conf.mu_mimo_owner = false; |
| |
| sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL; |
| |
| del_timer_sync(&local->dynamic_ps_timer); |
| wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work); |
| |
| /* Disable ARP filtering */ |
| if (sdata->vif.cfg.arp_addr_cnt) |
| changed |= BSS_CHANGED_ARP_FILTER; |
| |
| sdata->vif.bss_conf.qos = false; |
| if (!ieee80211_vif_is_mld(&sdata->vif)) { |
| changed |= BSS_CHANGED_QOS; |
| /* The BSSID (not really interesting) and HT changed */ |
| changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; |
| ieee80211_bss_info_change_notify(sdata, changed); |
| } else { |
| ieee80211_vif_cfg_change_notify(sdata, changed); |
| } |
| |
| /* disassociated - set to defaults now */ |
| ieee80211_set_wmm_default(&sdata->deflink, false, false); |
| |
| del_timer_sync(&sdata->u.mgd.conn_mon_timer); |
| del_timer_sync(&sdata->u.mgd.bcn_mon_timer); |
| del_timer_sync(&sdata->u.mgd.timer); |
| |
| sdata->vif.bss_conf.dtim_period = 0; |
| sdata->vif.bss_conf.beacon_rate = NULL; |
| |
| sdata->deflink.u.mgd.have_beacon = false; |
| sdata->deflink.u.mgd.tracking_signal_avg = false; |
| sdata->deflink.u.mgd.disable_wmm_tracking = false; |
| |
| ifmgd->flags = 0; |
| |
| for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) { |
| struct ieee80211_link_data *link; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (!link) |
| continue; |
| ieee80211_link_release_channel(link); |
| } |
| |
| sdata->vif.bss_conf.csa_active = false; |
| sdata->deflink.u.mgd.csa_waiting_bcn = false; |
| sdata->deflink.u.mgd.csa_ignored_same_chan = false; |
| if (sdata->csa_blocked_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_blocked_tx = false; |
| } |
| |
| /* existing TX TSPEC sessions no longer exist */ |
| memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); |
| wiphy_delayed_work_cancel(local->hw.wiphy, &ifmgd->tx_tspec_wk); |
| |
| sdata->vif.bss_conf.power_type = IEEE80211_REG_UNSET_AP; |
| sdata->vif.bss_conf.pwr_reduction = 0; |
| sdata->vif.bss_conf.tx_pwr_env_num = 0; |
| memset(sdata->vif.bss_conf.tx_pwr_env, 0, |
| sizeof(sdata->vif.bss_conf.tx_pwr_env)); |
| |
| sdata->vif.cfg.eml_cap = 0; |
| sdata->vif.cfg.eml_med_sync_delay = 0; |
| sdata->vif.cfg.mld_capa_op = 0; |
| |
| memset(&sdata->u.mgd.ttlm_info, 0, |
| sizeof(sdata->u.mgd.ttlm_info)); |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, &ifmgd->ttlm_work); |
| |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->neg_ttlm_timeout_work); |
| ieee80211_vif_set_links(sdata, 0, 0); |
| |
| ifmgd->mcast_seq_last = IEEE80211_SN_MODULO; |
| } |
| |
| static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) |
| return; |
| |
| __ieee80211_stop_poll(sdata); |
| |
| ieee80211_recalc_ps(local); |
| |
| if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| return; |
| |
| /* |
| * We've received a probe response, but are not sure whether |
| * we have or will be receiving any beacons or data, so let's |
| * schedule the timers again, just in case. |
| */ |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| |
| mod_timer(&ifmgd->conn_mon_timer, |
| round_jiffies_up(jiffies + |
| IEEE80211_CONNECTION_IDLE_TIME)); |
| } |
| |
| static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_hdr *hdr, |
| u16 tx_time) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 tid; |
| int ac; |
| struct ieee80211_sta_tx_tspec *tx_tspec; |
| unsigned long now = jiffies; |
| |
| if (!ieee80211_is_data_qos(hdr->frame_control)) |
| return; |
| |
| tid = ieee80211_get_tid(hdr); |
| ac = ieee80211_ac_from_tid(tid); |
| tx_tspec = &ifmgd->tx_tspec[ac]; |
| |
| if (likely(!tx_tspec->admitted_time)) |
| return; |
| |
| if (time_after(now, tx_tspec->time_slice_start + HZ)) { |
| tx_tspec->consumed_tx_time = 0; |
| tx_tspec->time_slice_start = now; |
| |
| if (tx_tspec->downgraded) { |
| tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; |
| wiphy_delayed_work_queue(sdata->local->hw.wiphy, |
| &ifmgd->tx_tspec_wk, 0); |
| } |
| } |
| |
| if (tx_tspec->downgraded) |
| return; |
| |
| tx_tspec->consumed_tx_time += tx_time; |
| |
| if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) { |
| tx_tspec->downgraded = true; |
| tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE; |
| wiphy_delayed_work_queue(sdata->local->hw.wiphy, |
| &ifmgd->tx_tspec_wk, 0); |
| } |
| } |
| |
| void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_hdr *hdr, bool ack, u16 tx_time) |
| { |
| ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time); |
| |
| if (!ieee80211_is_any_nullfunc(hdr->frame_control) || |
| !sdata->u.mgd.probe_send_count) |
| return; |
| |
| if (ack) |
| sdata->u.mgd.probe_send_count = 0; |
| else |
| sdata->u.mgd.nullfunc_failed = true; |
| wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); |
| } |
| |
| static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata, |
| const u8 *src, const u8 *dst, |
| const u8 *ssid, size_t ssid_len, |
| struct ieee80211_channel *channel) |
| { |
| struct sk_buff *skb; |
| |
| skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel, |
| ssid, ssid_len, NULL, 0, |
| IEEE80211_PROBE_FLAG_DIRECTED); |
| if (skb) |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 *dst = sdata->vif.cfg.ap_addr; |
| u8 unicast_limit = max(1, max_probe_tries - 3); |
| struct sta_info *sta; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif))) |
| return; |
| |
| /* |
| * Try sending broadcast probe requests for the last three |
| * probe requests after the first ones failed since some |
| * buggy APs only support broadcast probe requests. |
| */ |
| if (ifmgd->probe_send_count >= unicast_limit) |
| dst = NULL; |
| |
| /* |
| * When the hardware reports an accurate Tx ACK status, it's |
| * better to send a nullfunc frame instead of a probe request, |
| * as it will kick us off the AP quickly if we aren't associated |
| * anymore. The timeout will be reset if the frame is ACKed by |
| * the AP. |
| */ |
| ifmgd->probe_send_count++; |
| |
| if (dst) { |
| sta = sta_info_get(sdata, dst); |
| if (!WARN_ON(!sta)) |
| ieee80211_check_fast_rx(sta); |
| } |
| |
| if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) { |
| ifmgd->nullfunc_failed = false; |
| ieee80211_send_nullfunc(sdata->local, sdata, false); |
| } else { |
| ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst, |
| sdata->vif.cfg.ssid, |
| sdata->vif.cfg.ssid_len, |
| sdata->deflink.conf->bss->channel); |
| } |
| |
| ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); |
| run_again(sdata, ifmgd->probe_timeout); |
| } |
| |
| static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, |
| bool beacon) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| bool already = false; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (WARN_ON_ONCE(ieee80211_vif_is_mld(&sdata->vif))) |
| return; |
| |
| if (!ieee80211_sdata_running(sdata)) |
| return; |
| |
| if (!ifmgd->associated) |
| return; |
| |
| if (sdata->local->tmp_channel || sdata->local->scanning) |
| return; |
| |
| if (sdata->local->suspending) { |
| /* reschedule after resume */ |
| ieee80211_reset_ap_probe(sdata); |
| return; |
| } |
| |
| if (beacon) { |
| mlme_dbg_ratelimited(sdata, |
| "detected beacon loss from AP (missed %d beacons) - probing\n", |
| beacon_loss_count); |
| |
| ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL); |
| } |
| |
| /* |
| * The driver/our work has already reported this event or the |
| * connection monitoring has kicked in and we have already sent |
| * a probe request. Or maybe the AP died and the driver keeps |
| * reporting until we disassociate... |
| * |
| * In either case we have to ignore the current call to this |
| * function (except for setting the correct probe reason bit) |
| * because otherwise we would reset the timer every time and |
| * never check whether we received a probe response! |
| */ |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) |
| already = true; |
| |
| ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; |
| |
| if (already) |
| return; |
| |
| ieee80211_recalc_ps(sdata->local); |
| |
| ifmgd->probe_send_count = 0; |
| ieee80211_mgd_probe_ap_send(sdata); |
| } |
| |
| struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct cfg80211_bss *cbss; |
| struct sk_buff *skb; |
| const struct element *ssid; |
| int ssid_len; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || |
| ieee80211_vif_is_mld(&sdata->vif))) |
| return NULL; |
| |
| if (ifmgd->associated) |
| cbss = sdata->deflink.conf->bss; |
| else if (ifmgd->auth_data) |
| cbss = ifmgd->auth_data->bss; |
| else if (ifmgd->assoc_data && ifmgd->assoc_data->link[0].bss) |
| cbss = ifmgd->assoc_data->link[0].bss; |
| else |
| return NULL; |
| |
| rcu_read_lock(); |
| ssid = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); |
| if (WARN_ONCE(!ssid || ssid->datalen > IEEE80211_MAX_SSID_LEN, |
| "invalid SSID element (len=%d)", |
| ssid ? ssid->datalen : -1)) |
| ssid_len = 0; |
| else |
| ssid_len = ssid->datalen; |
| |
| skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid, |
| (u32) -1, cbss->channel, |
| ssid->data, ssid_len, |
| NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED); |
| rcu_read_unlock(); |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_ap_probereq_get); |
| |
| static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata, |
| const u8 *buf, size_t len, bool tx, |
| u16 reason, bool reconnect) |
| { |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT, |
| .u.mlme.reason = reason, |
| }; |
| |
| if (tx) |
| cfg80211_tx_mlme_mgmt(sdata->dev, buf, len, reconnect); |
| else |
| cfg80211_rx_mlme_mgmt(sdata->dev, buf, len); |
| |
| drv_event_callback(sdata->local, sdata, &event); |
| } |
| |
| static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| bool tx; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (!ifmgd->associated) |
| return; |
| |
| /* |
| * MLO drivers should have HANDLES_QUIET_CSA, so that csa_blocked_tx |
| * is always false; if they don't then this may try to transmit the |
| * frame but queues will be stopped. |
| */ |
| tx = !sdata->csa_blocked_tx; |
| |
| if (!ifmgd->driver_disconnect) { |
| unsigned int link_id; |
| |
| /* |
| * AP is probably out of range (or not reachable for another |
| * reason) so remove the bss structs for that AP. In the case |
| * of multi-link, it's not clear that all of them really are |
| * out of range, but if they weren't the driver likely would |
| * have switched to just have a single link active? |
| */ |
| for (link_id = 0; |
| link_id < ARRAY_SIZE(sdata->link); |
| link_id++) { |
| struct ieee80211_link_data *link; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (!link) |
| continue; |
| cfg80211_unlink_bss(local->hw.wiphy, link->conf->bss); |
| link->conf->bss = NULL; |
| } |
| } |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| ifmgd->driver_disconnect ? |
| WLAN_REASON_DEAUTH_LEAVING : |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, |
| tx, frame_buf); |
| /* the other links will be destroyed */ |
| sdata->vif.bss_conf.csa_active = false; |
| sdata->deflink.u.mgd.csa_waiting_bcn = false; |
| if (sdata->csa_blocked_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_blocked_tx = false; |
| } |
| |
| ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, |
| ifmgd->reconnect); |
| ifmgd->reconnect = false; |
| } |
| |
| static void ieee80211_beacon_connection_loss_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.beacon_connection_loss_work); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| if (ifmgd->connection_loss) { |
| sdata_info(sdata, "Connection to AP %pM lost\n", |
| sdata->vif.cfg.ap_addr); |
| __ieee80211_disconnect(sdata); |
| ifmgd->connection_loss = false; |
| } else if (ifmgd->driver_disconnect) { |
| sdata_info(sdata, |
| "Driver requested disconnection from AP %pM\n", |
| sdata->vif.cfg.ap_addr); |
| __ieee80211_disconnect(sdata); |
| ifmgd->driver_disconnect = false; |
| } else { |
| if (ifmgd->associated) |
| sdata->deflink.u.mgd.beacon_loss_count++; |
| ieee80211_mgd_probe_ap(sdata, true); |
| } |
| } |
| |
| static void ieee80211_csa_connection_drop_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.csa_connection_drop_work); |
| |
| __ieee80211_disconnect(sdata); |
| } |
| |
| void ieee80211_beacon_loss(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_hw *hw = &sdata->local->hw; |
| |
| trace_api_beacon_loss(sdata); |
| |
| sdata->u.mgd.connection_loss = false; |
| wiphy_work_queue(hw->wiphy, &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_loss); |
| |
| void ieee80211_connection_loss(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_hw *hw = &sdata->local->hw; |
| |
| trace_api_connection_loss(sdata); |
| |
| sdata->u.mgd.connection_loss = true; |
| wiphy_work_queue(hw->wiphy, &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| EXPORT_SYMBOL(ieee80211_connection_loss); |
| |
| void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_hw *hw = &sdata->local->hw; |
| |
| trace_api_disconnect(sdata, reconnect); |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) |
| return; |
| |
| sdata->u.mgd.driver_disconnect = true; |
| sdata->u.mgd.reconnect = reconnect; |
| wiphy_work_queue(hw->wiphy, &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| EXPORT_SYMBOL(ieee80211_disconnect); |
| |
| static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, |
| bool assoc) |
| { |
| struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (!assoc) { |
| /* |
| * we are not authenticated yet, the only timer that could be |
| * running is the timeout for the authentication response which |
| * which is not relevant anymore. |
| */ |
| del_timer_sync(&sdata->u.mgd.timer); |
| sta_info_destroy_addr(sdata, auth_data->ap_addr); |
| |
| /* other links are destroyed */ |
| eth_zero_addr(sdata->deflink.u.mgd.bssid); |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, |
| BSS_CHANGED_BSSID); |
| sdata->u.mgd.flags = 0; |
| |
| ieee80211_link_release_channel(&sdata->deflink); |
| ieee80211_vif_set_links(sdata, 0, 0); |
| } |
| |
| cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); |
| kfree(auth_data); |
| sdata->u.mgd.auth_data = NULL; |
| } |
| |
| enum assoc_status { |
| ASSOC_SUCCESS, |
| ASSOC_REJECTED, |
| ASSOC_TIMEOUT, |
| ASSOC_ABANDON, |
| }; |
| |
| static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, |
| enum assoc_status status) |
| { |
| struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (status != ASSOC_SUCCESS) { |
| /* |
| * we are not associated yet, the only timer that could be |
| * running is the timeout for the association response which |
| * which is not relevant anymore. |
| */ |
| del_timer_sync(&sdata->u.mgd.timer); |
| sta_info_destroy_addr(sdata, assoc_data->ap_addr); |
| |
| eth_zero_addr(sdata->deflink.u.mgd.bssid); |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, |
| BSS_CHANGED_BSSID); |
| sdata->u.mgd.flags = 0; |
| sdata->vif.bss_conf.mu_mimo_owner = false; |
| |
| if (status != ASSOC_REJECTED) { |
| struct cfg80211_assoc_failure data = { |
| .timeout = status == ASSOC_TIMEOUT, |
| }; |
| int i; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(data.bss) != |
| ARRAY_SIZE(assoc_data->link)); |
| |
| for (i = 0; i < ARRAY_SIZE(data.bss); i++) |
| data.bss[i] = assoc_data->link[i].bss; |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) |
| data.ap_mld_addr = assoc_data->ap_addr; |
| |
| cfg80211_assoc_failure(sdata->dev, &data); |
| } |
| |
| ieee80211_link_release_channel(&sdata->deflink); |
| ieee80211_vif_set_links(sdata, 0, 0); |
| } |
| |
| kfree(assoc_data); |
| sdata->u.mgd.assoc_data = NULL; |
| } |
| |
| static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; |
| const struct element *challenge; |
| u8 *pos; |
| u32 tx_flags = 0; |
| struct ieee80211_prep_tx_info info = { |
| .subtype = IEEE80211_STYPE_AUTH, |
| .link_id = auth_data->link_id, |
| }; |
| |
| pos = mgmt->u.auth.variable; |
| challenge = cfg80211_find_elem(WLAN_EID_CHALLENGE, pos, |
| len - (pos - (u8 *)mgmt)); |
| if (!challenge) |
| return; |
| auth_data->expected_transaction = 4; |
| drv_mgd_prepare_tx(sdata->local, sdata, &info); |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_INTFL_MLME_CONN_TX; |
| ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, |
| (void *)challenge, |
| challenge->datalen + sizeof(*challenge), |
| auth_data->ap_addr, auth_data->ap_addr, |
| auth_data->key, auth_data->key_len, |
| auth_data->key_idx, tx_flags); |
| } |
| |
| static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| const u8 *ap_addr = ifmgd->auth_data->ap_addr; |
| struct sta_info *sta; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| sdata_info(sdata, "authenticated\n"); |
| ifmgd->auth_data->done = true; |
| ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; |
| ifmgd->auth_data->timeout_started = true; |
| run_again(sdata, ifmgd->auth_data->timeout); |
| |
| /* move station state to auth */ |
| sta = sta_info_get(sdata, ap_addr); |
| if (!sta) { |
| WARN_ONCE(1, "%s: STA %pM not found", sdata->name, ap_addr); |
| return false; |
| } |
| if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { |
| sdata_info(sdata, "failed moving %pM to auth\n", ap_addr); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 auth_alg, auth_transaction, status_code; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = AUTH_EVENT, |
| }; |
| struct ieee80211_prep_tx_info info = { |
| .subtype = IEEE80211_STYPE_AUTH, |
| }; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (len < 24 + 6) |
| return; |
| |
| if (!ifmgd->auth_data || ifmgd->auth_data->done) |
| return; |
| |
| if (!ether_addr_equal(ifmgd->auth_data->ap_addr, mgmt->bssid)) |
| return; |
| |
| auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); |
| auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); |
| status_code = le16_to_cpu(mgmt->u.auth.status_code); |
| |
| if (auth_alg != ifmgd->auth_data->algorithm || |
| (auth_alg != WLAN_AUTH_SAE && |
| auth_transaction != ifmgd->auth_data->expected_transaction) || |
| (auth_alg == WLAN_AUTH_SAE && |
| (auth_transaction < ifmgd->auth_data->expected_transaction || |
| auth_transaction > 2))) { |
| sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n", |
| mgmt->sa, auth_alg, ifmgd->auth_data->algorithm, |
| auth_transaction, |
| ifmgd->auth_data->expected_transaction); |
| goto notify_driver; |
| } |
| |
| if (status_code != WLAN_STATUS_SUCCESS) { |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| |
| if (auth_alg == WLAN_AUTH_SAE && |
| (status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED || |
| (auth_transaction == 1 && |
| (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT || |
| status_code == WLAN_STATUS_SAE_PK)))) { |
| /* waiting for userspace now */ |
| ifmgd->auth_data->waiting = true; |
| ifmgd->auth_data->timeout = |
| jiffies + IEEE80211_AUTH_WAIT_SAE_RETRY; |
| ifmgd->auth_data->timeout_started = true; |
| run_again(sdata, ifmgd->auth_data->timeout); |
| goto notify_driver; |
| } |
| |
| sdata_info(sdata, "%pM denied authentication (status %d)\n", |
| mgmt->sa, status_code); |
| ieee80211_destroy_auth_data(sdata, false); |
| event.u.mlme.status = MLME_DENIED; |
| event.u.mlme.reason = status_code; |
| drv_event_callback(sdata->local, sdata, &event); |
| goto notify_driver; |
| } |
| |
| switch (ifmgd->auth_data->algorithm) { |
| case WLAN_AUTH_OPEN: |
| case WLAN_AUTH_LEAP: |
| case WLAN_AUTH_FT: |
| case WLAN_AUTH_SAE: |
| case WLAN_AUTH_FILS_SK: |
| case WLAN_AUTH_FILS_SK_PFS: |
| case WLAN_AUTH_FILS_PK: |
| break; |
| case WLAN_AUTH_SHARED_KEY: |
| if (ifmgd->auth_data->expected_transaction != 4) { |
| ieee80211_auth_challenge(sdata, mgmt, len); |
| /* need another frame */ |
| return; |
| } |
| break; |
| default: |
| WARN_ONCE(1, "invalid auth alg %d", |
| ifmgd->auth_data->algorithm); |
| goto notify_driver; |
| } |
| |
| event.u.mlme.status = MLME_SUCCESS; |
| info.success = 1; |
| drv_event_callback(sdata->local, sdata, &event); |
| if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE || |
| (auth_transaction == 2 && |
| ifmgd->auth_data->expected_transaction == 2)) { |
| if (!ieee80211_mark_sta_auth(sdata)) |
| return; /* ignore frame -- wait for timeout */ |
| } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && |
| auth_transaction == 2) { |
| sdata_info(sdata, "SAE peer confirmed\n"); |
| ifmgd->auth_data->peer_confirmed = true; |
| } |
| |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| notify_driver: |
| drv_mgd_complete_tx(sdata->local, sdata, &info); |
| } |
| |
| #define case_WLAN(type) \ |
| case WLAN_REASON_##type: return #type |
| |
| const char *ieee80211_get_reason_code_string(u16 reason_code) |
| { |
| switch (reason_code) { |
| case_WLAN(UNSPECIFIED); |
| case_WLAN(PREV_AUTH_NOT_VALID); |
| case_WLAN(DEAUTH_LEAVING); |
| case_WLAN(DISASSOC_DUE_TO_INACTIVITY); |
| case_WLAN(DISASSOC_AP_BUSY); |
| case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA); |
| case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA); |
| case_WLAN(DISASSOC_STA_HAS_LEFT); |
| case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH); |
| case_WLAN(DISASSOC_BAD_POWER); |
| case_WLAN(DISASSOC_BAD_SUPP_CHAN); |
| case_WLAN(INVALID_IE); |
| case_WLAN(MIC_FAILURE); |
| case_WLAN(4WAY_HANDSHAKE_TIMEOUT); |
| case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT); |
| case_WLAN(IE_DIFFERENT); |
| case_WLAN(INVALID_GROUP_CIPHER); |
| case_WLAN(INVALID_PAIRWISE_CIPHER); |
| case_WLAN(INVALID_AKMP); |
| case_WLAN(UNSUPP_RSN_VERSION); |
| case_WLAN(INVALID_RSN_IE_CAP); |
| case_WLAN(IEEE8021X_FAILED); |
| case_WLAN(CIPHER_SUITE_REJECTED); |
| case_WLAN(DISASSOC_UNSPECIFIED_QOS); |
| case_WLAN(DISASSOC_QAP_NO_BANDWIDTH); |
| case_WLAN(DISASSOC_LOW_ACK); |
| case_WLAN(DISASSOC_QAP_EXCEED_TXOP); |
| case_WLAN(QSTA_LEAVE_QBSS); |
| case_WLAN(QSTA_NOT_USE); |
| case_WLAN(QSTA_REQUIRE_SETUP); |
| case_WLAN(QSTA_TIMEOUT); |
| case_WLAN(QSTA_CIPHER_NOT_SUPP); |
| case_WLAN(MESH_PEER_CANCELED); |
| case_WLAN(MESH_MAX_PEERS); |
| case_WLAN(MESH_CONFIG); |
| case_WLAN(MESH_CLOSE); |
| case_WLAN(MESH_MAX_RETRIES); |
| case_WLAN(MESH_CONFIRM_TIMEOUT); |
| case_WLAN(MESH_INVALID_GTK); |
| case_WLAN(MESH_INCONSISTENT_PARAM); |
| case_WLAN(MESH_INVALID_SECURITY); |
| case_WLAN(MESH_PATH_ERROR); |
| case_WLAN(MESH_PATH_NOFORWARD); |
| case_WLAN(MESH_PATH_DEST_UNREACHABLE); |
| case_WLAN(MAC_EXISTS_IN_MBSS); |
| case_WLAN(MESH_CHAN_REGULATORY); |
| case_WLAN(MESH_CHAN); |
| default: return "<unknown>"; |
| } |
| } |
| |
| static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (len < 24 + 2) |
| return; |
| |
| if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { |
| ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); |
| return; |
| } |
| |
| if (ifmgd->associated && |
| ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) { |
| sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n", |
| sdata->vif.cfg.ap_addr, reason_code, |
| ieee80211_get_reason_code_string(reason_code)); |
| |
| ieee80211_set_disassoc(sdata, 0, 0, false, NULL); |
| |
| ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, |
| reason_code, false); |
| return; |
| } |
| |
| if (ifmgd->assoc_data && |
| ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->ap_addr)) { |
| sdata_info(sdata, |
| "deauthenticated from %pM while associating (Reason: %u=%s)\n", |
| ifmgd->assoc_data->ap_addr, reason_code, |
| ieee80211_get_reason_code_string(reason_code)); |
| |
| ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); |
| |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| return; |
| } |
| } |
| |
| |
| static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 reason_code; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (len < 24 + 2) |
| return; |
| |
| if (!ifmgd->associated || |
| !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) |
| return; |
| |
| reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); |
| |
| if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { |
| ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); |
| return; |
| } |
| |
| sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n", |
| sdata->vif.cfg.ap_addr, reason_code, |
| ieee80211_get_reason_code_string(reason_code)); |
| |
| ieee80211_set_disassoc(sdata, 0, 0, false, NULL); |
| |
| ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code, |
| false); |
| } |
| |
| static void ieee80211_get_rates(struct ieee80211_supported_band *sband, |
| u8 *supp_rates, unsigned int supp_rates_len, |
| u32 *rates, u32 *basic_rates, |
| bool *have_higher_than_11mbit, |
| int *min_rate, int *min_rate_index) |
| { |
| int i, j; |
| |
| for (i = 0; i < supp_rates_len; i++) { |
| int rate = supp_rates[i] & 0x7f; |
| bool is_basic = !!(supp_rates[i] & 0x80); |
| |
| if ((rate * 5) > 110) |
| *have_higher_than_11mbit = true; |
| |
| /* |
| * Skip HT, VHT, HE, EHT and SAE H2E only BSS membership |
| * selectors since they're not rates. |
| * |
| * Note: Even though the membership selector and the basic |
| * rate flag share the same bit, they are not exactly |
| * the same. |
| */ |
| if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) || |
| supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) || |
| supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY) || |
| supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_EHT_PHY) || |
| supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_SAE_H2E)) |
| continue; |
| |
| for (j = 0; j < sband->n_bitrates; j++) { |
| struct ieee80211_rate *br; |
| int brate; |
| |
| br = &sband->bitrates[j]; |
| |
| brate = DIV_ROUND_UP(br->bitrate, 5); |
| if (brate == rate) { |
| *rates |= BIT(j); |
| if (is_basic) |
| *basic_rates |= BIT(j); |
| if ((rate * 5) < *min_rate) { |
| *min_rate = rate * 5; |
| *min_rate_index = j; |
| } |
| break; |
| } |
| } |
| } |
| } |
| |
| static bool ieee80211_twt_req_supported(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| const struct link_sta_info *link_sta, |
| const struct ieee802_11_elems *elems) |
| { |
| const struct ieee80211_sta_he_cap *own_he_cap = |
| ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); |
| |
| if (elems->ext_capab_len < 10) |
| return false; |
| |
| if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT)) |
| return false; |
| |
| return link_sta->pub->he_cap.he_cap_elem.mac_cap_info[0] & |
| IEEE80211_HE_MAC_CAP0_TWT_RES && |
| own_he_cap && |
| (own_he_cap->he_cap_elem.mac_cap_info[0] & |
| IEEE80211_HE_MAC_CAP0_TWT_REQ); |
| } |
| |
| static u64 ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_link_data *link, |
| struct link_sta_info *link_sta, |
| struct ieee802_11_elems *elems) |
| { |
| bool twt = ieee80211_twt_req_supported(sdata, sband, link_sta, elems); |
| |
| if (link->conf->twt_requester != twt) { |
| link->conf->twt_requester = twt; |
| return BSS_CHANGED_TWT; |
| } |
| return 0; |
| } |
| |
| static bool ieee80211_twt_bcast_support(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_bss_conf *bss_conf, |
| struct ieee80211_supported_band *sband, |
| struct link_sta_info *link_sta) |
| { |
| const struct ieee80211_sta_he_cap *own_he_cap = |
| ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); |
| |
| return bss_conf->he_support && |
| (link_sta->pub->he_cap.he_cap_elem.mac_cap_info[2] & |
| IEEE80211_HE_MAC_CAP2_BCAST_TWT) && |
| own_he_cap && |
| (own_he_cap->he_cap_elem.mac_cap_info[2] & |
| IEEE80211_HE_MAC_CAP2_BCAST_TWT); |
| } |
| |
| static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, |
| struct link_sta_info *link_sta, |
| struct cfg80211_bss *cbss, |
| struct ieee80211_mgmt *mgmt, |
| const u8 *elem_start, |
| unsigned int elem_len, |
| u64 *changed) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; |
| struct ieee80211_bss_conf *bss_conf = link->conf; |
| struct ieee80211_local *local = sdata->local; |
| unsigned int link_id = link->link_id; |
| struct ieee80211_elems_parse_params parse_params = { |
| .mode = link->u.mgd.conn.mode, |
| .start = elem_start, |
| .len = elem_len, |
| .link_id = link_id == assoc_data->assoc_link_id ? -1 : link_id, |
| .from_ap = true, |
| }; |
| bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ; |
| bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; |
| bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ; |
| const struct cfg80211_bss_ies *bss_ies = NULL; |
| struct ieee80211_supported_band *sband; |
| struct ieee802_11_elems *elems; |
| const __le16 prof_bss_param_ch_present = |
| cpu_to_le16(IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT); |
| u16 capab_info; |
| bool ret; |
| |
| elems = ieee802_11_parse_elems_full(&parse_params); |
| if (!elems) |
| return false; |
| |
| if (link_id == assoc_data->assoc_link_id) { |
| capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); |
| |
| /* |
| * we should not get to this flow unless the association was |
| * successful, so set the status directly to success |
| */ |
| assoc_data->link[link_id].status = WLAN_STATUS_SUCCESS; |
| if (elems->ml_basic) { |
| int bss_param_ch_cnt = |
| ieee80211_mle_get_bss_param_ch_cnt((const void *)elems->ml_basic); |
| |
| if (bss_param_ch_cnt < 0) { |
| ret = false; |
| goto out; |
| } |
| link->u.mgd.bss_param_ch_cnt = bss_param_ch_cnt; |
| } |
| } else if (elems->parse_error & IEEE80211_PARSE_ERR_DUP_NEST_ML_BASIC || |
| !elems->prof || |
| !(elems->prof->control & prof_bss_param_ch_present)) { |
| ret = false; |
| goto out; |
| } else { |
| const u8 *ptr = elems->prof->variable + |
| elems->prof->sta_info_len - 1; |
| |
| /* |
| * During parsing, we validated that these fields exist, |
| * otherwise elems->prof would have been set to NULL. |
| */ |
| capab_info = get_unaligned_le16(ptr); |
| assoc_data->link[link_id].status = get_unaligned_le16(ptr + 2); |
| link->u.mgd.bss_param_ch_cnt = |
| ieee80211_mle_basic_sta_prof_bss_param_ch_cnt(elems->prof); |
| |
| if (assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) { |
| link_info(link, "association response status code=%u\n", |
| assoc_data->link[link_id].status); |
| ret = true; |
| goto out; |
| } |
| } |
| |
| if (!is_s1g && !elems->supp_rates) { |
| sdata_info(sdata, "no SuppRates element in AssocResp\n"); |
| ret = false; |
| goto out; |
| } |
| |
| link->u.mgd.tdls_chan_switch_prohibited = |
| elems->ext_capab && elems->ext_capab_len >= 5 && |
| (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED); |
| |
| /* |
| * Some APs are erroneously not including some information in their |
| * (re)association response frames. Try to recover by using the data |
| * from the beacon or probe response. This seems to afflict mobile |
| * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", |
| * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. |
| */ |
| if (!is_6ghz && |
| ((assoc_data->wmm && !elems->wmm_param) || |
| (link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT && |
| (!elems->ht_cap_elem || !elems->ht_operation)) || |
| (link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT && |
| (!elems->vht_cap_elem || !elems->vht_operation)))) { |
| const struct cfg80211_bss_ies *ies; |
| struct ieee802_11_elems *bss_elems; |
| |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->ies); |
| if (ies) |
| bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, |
| GFP_ATOMIC); |
| rcu_read_unlock(); |
| if (!bss_ies) { |
| ret = false; |
| goto out; |
| } |
| |
| parse_params.start = bss_ies->data; |
| parse_params.len = bss_ies->len; |
| parse_params.bss = cbss; |
| bss_elems = ieee802_11_parse_elems_full(&parse_params); |
| if (!bss_elems) { |
| ret = false; |
| goto out; |
| } |
| |
| if (assoc_data->wmm && |
| !elems->wmm_param && bss_elems->wmm_param) { |
| elems->wmm_param = bss_elems->wmm_param; |
| sdata_info(sdata, |
| "AP bug: WMM param missing from AssocResp\n"); |
| } |
| |
| /* |
| * Also check if we requested HT/VHT, otherwise the AP doesn't |
| * have to include the IEs in the (re)association response. |
| */ |
| if (!elems->ht_cap_elem && bss_elems->ht_cap_elem && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT) { |
| elems->ht_cap_elem = bss_elems->ht_cap_elem; |
| sdata_info(sdata, |
| "AP bug: HT capability missing from AssocResp\n"); |
| } |
| if (!elems->ht_operation && bss_elems->ht_operation && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT) { |
| elems->ht_operation = bss_elems->ht_operation; |
| sdata_info(sdata, |
| "AP bug: HT operation missing from AssocResp\n"); |
| } |
| if (!elems->vht_cap_elem && bss_elems->vht_cap_elem && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT) { |
| elems->vht_cap_elem = bss_elems->vht_cap_elem; |
| sdata_info(sdata, |
| "AP bug: VHT capa missing from AssocResp\n"); |
| } |
| if (!elems->vht_operation && bss_elems->vht_operation && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT) { |
| elems->vht_operation = bss_elems->vht_operation; |
| sdata_info(sdata, |
| "AP bug: VHT operation missing from AssocResp\n"); |
| } |
| |
| kfree(bss_elems); |
| } |
| |
| /* |
| * We previously checked these in the beacon/probe response, so |
| * they should be present here. This is just a safety net. |
| * Note that the ieee80211_config_bw() below would also check |
| * for this (and more), but this has better error reporting. |
| */ |
| if (!is_6ghz && link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT && |
| (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) { |
| sdata_info(sdata, |
| "HT AP is missing WMM params or HT capability/operation\n"); |
| ret = false; |
| goto out; |
| } |
| |
| if (is_5ghz && link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT && |
| (!elems->vht_cap_elem || !elems->vht_operation)) { |
| sdata_info(sdata, |
| "VHT AP is missing VHT capability/operation\n"); |
| ret = false; |
| goto out; |
| } |
| |
| /* check/update if AP changed anything in assoc response vs. scan */ |
| if (ieee80211_config_bw(link, elems, |
| link_id == assoc_data->assoc_link_id, |
| changed)) { |
| ret = false; |
| goto out; |
| } |
| |
| if (WARN_ON(!link->conf->chanreq.oper.chan)) { |
| ret = false; |
| goto out; |
| } |
| sband = local->hw.wiphy->bands[link->conf->chanreq.oper.chan->band]; |
| |
| /* Set up internal HT/VHT capabilities */ |
| if (elems->ht_cap_elem && link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT) |
| ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, |
| elems->ht_cap_elem, |
| link_sta); |
| |
| if (elems->vht_cap_elem && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT) { |
| const struct ieee80211_vht_cap *bss_vht_cap = NULL; |
| const struct cfg80211_bss_ies *ies; |
| |
| /* |
| * Cisco AP module 9115 with FW 17.3 has a bug and sends a |
| * too large maximum MPDU length in the association response |
| * (indicating 12k) that it cannot actually process ... |
| * Work around that. |
| */ |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->ies); |
| if (ies) { |
| const struct element *elem; |
| |
| elem = cfg80211_find_elem(WLAN_EID_VHT_CAPABILITY, |
| ies->data, ies->len); |
| if (elem && elem->datalen >= sizeof(*bss_vht_cap)) |
| bss_vht_cap = (const void *)elem->data; |
| } |
| |
| ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, |
| elems->vht_cap_elem, |
| bss_vht_cap, link_sta); |
| rcu_read_unlock(); |
| } |
| |
| if (elems->he_operation && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HE && |
| elems->he_cap) { |
| const struct ieee80211_he_6ghz_oper *he_6ghz_oper; |
| |
| ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, |
| elems->he_cap, |
| elems->he_cap_len, |
| elems->he_6ghz_capa, |
| link_sta); |
| |
| he_6ghz_oper = ieee80211_he_6ghz_oper(elems->he_operation); |
| |
| if (is_6ghz && he_6ghz_oper) { |
| switch (u8_get_bits(he_6ghz_oper->control, |
| IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO)) { |
| case IEEE80211_6GHZ_CTRL_REG_LPI_AP: |
| bss_conf->power_type = IEEE80211_REG_LPI_AP; |
| break; |
| case IEEE80211_6GHZ_CTRL_REG_SP_AP: |
| bss_conf->power_type = IEEE80211_REG_SP_AP; |
| break; |
| case IEEE80211_6GHZ_CTRL_REG_VLP_AP: |
| bss_conf->power_type = IEEE80211_REG_VLP_AP; |
| break; |
| default: |
| bss_conf->power_type = IEEE80211_REG_UNSET_AP; |
| break; |
| } |
| } else if (is_6ghz) { |
| link_info(link, |
| "HE 6 GHz operation missing (on %d MHz), expect issues\n", |
| bss_conf->chanreq.oper.chan->center_freq); |
| } |
| |
| bss_conf->he_support = link_sta->pub->he_cap.has_he; |
| if (elems->rsnx && elems->rsnx_len && |
| (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) && |
| wiphy_ext_feature_isset(local->hw.wiphy, |
| NL80211_EXT_FEATURE_PROTECTED_TWT)) |
| bss_conf->twt_protected = true; |
| else |
| bss_conf->twt_protected = false; |
| |
| *changed |= ieee80211_recalc_twt_req(sdata, sband, link, |
| link_sta, elems); |
| |
| if (elems->eht_operation && elems->eht_cap && |
| link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_EHT) { |
| ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband, |
| elems->he_cap, |
| elems->he_cap_len, |
| elems->eht_cap, |
| elems->eht_cap_len, |
| link_sta); |
| |
| bss_conf->eht_support = link_sta->pub->eht_cap.has_eht; |
| } else { |
| bss_conf->eht_support = false; |
| } |
| } else { |
| bss_conf->he_support = false; |
| bss_conf->twt_requester = false; |
| bss_conf->twt_protected = false; |
| bss_conf->eht_support = false; |
| } |
| |
| bss_conf->twt_broadcast = |
| ieee80211_twt_bcast_support(sdata, bss_conf, sband, link_sta); |
| |
| if (bss_conf->he_support) { |
| bss_conf->he_bss_color.color = |
| le32_get_bits(elems->he_operation->he_oper_params, |
| IEEE80211_HE_OPERATION_BSS_COLOR_MASK); |
| bss_conf->he_bss_color.partial = |
| le32_get_bits(elems->he_operation->he_oper_params, |
| IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR); |
| bss_conf->he_bss_color.enabled = |
| !le32_get_bits(elems->he_operation->he_oper_params, |
| IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED); |
| |
| if (bss_conf->he_bss_color.enabled) |
| *changed |= BSS_CHANGED_HE_BSS_COLOR; |
| |
| bss_conf->htc_trig_based_pkt_ext = |
| le32_get_bits(elems->he_operation->he_oper_params, |
| IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK); |
| bss_conf->frame_time_rts_th = |
| le32_get_bits(elems->he_operation->he_oper_params, |
| IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK); |
| |
| bss_conf->uora_exists = !!elems->uora_element; |
| if (elems->uora_element) |
| bss_conf->uora_ocw_range = elems->uora_element[0]; |
| |
| ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation); |
| ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr); |
| /* TODO: OPEN: what happens if BSS color disable is set? */ |
| } |
| |
| if (cbss->transmitted_bss) { |
| bss_conf->nontransmitted = true; |
| ether_addr_copy(bss_conf->transmitter_bssid, |
| cbss->transmitted_bss->bssid); |
| bss_conf->bssid_indicator = cbss->max_bssid_indicator; |
| bss_conf->bssid_index = cbss->bssid_index; |
| } |
| |
| /* |
| * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data |
| * in their association response, so ignore that data for our own |
| * configuration. If it changed since the last beacon, we'll get the |
| * next beacon and update then. |
| */ |
| |
| /* |
| * If an operating mode notification IE is present, override the |
| * NSS calculation (that would be done in rate_control_rate_init()) |
| * and use the # of streams from that element. |
| */ |
| if (elems->opmode_notif && |
| !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { |
| u8 nss; |
| |
| nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; |
| nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; |
| nss += 1; |
| link_sta->pub->rx_nss = nss; |
| } |
| |
| /* |
| * Always handle WMM once after association regardless |
| * of the first value the AP uses. Setting -1 here has |
| * that effect because the AP values is an unsigned |
| * 4-bit value. |
| */ |
| link->u.mgd.wmm_last_param_set = -1; |
| link->u.mgd.mu_edca_last_param_set = -1; |
| |
| if (link->u.mgd.disable_wmm_tracking) { |
| ieee80211_set_wmm_default(link, false, false); |
| } else if (!ieee80211_sta_wmm_params(local, link, elems->wmm_param, |
| elems->wmm_param_len, |
| elems->mu_edca_param_set)) { |
| /* still enable QoS since we might have HT/VHT */ |
| ieee80211_set_wmm_default(link, false, true); |
| /* disable WMM tracking in this case to disable |
| * tracking WMM parameter changes in the beacon if |
| * the parameters weren't actually valid. Doing so |
| * avoids changing parameters very strangely when |
| * the AP is going back and forth between valid and |
| * invalid parameters. |
| */ |
| link->u.mgd.disable_wmm_tracking = true; |
| } |
| |
| if (elems->max_idle_period_ie) { |
| bss_conf->max_idle_period = |
| le16_to_cpu(elems->max_idle_period_ie->max_idle_period); |
| bss_conf->protected_keep_alive = |
| !!(elems->max_idle_period_ie->idle_options & |
| WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE); |
| *changed |= BSS_CHANGED_KEEP_ALIVE; |
| } else { |
| bss_conf->max_idle_period = 0; |
| bss_conf->protected_keep_alive = false; |
| } |
| |
| /* set assoc capability (AID was already set earlier), |
| * ieee80211_set_associated() will tell the driver */ |
| bss_conf->assoc_capability = capab_info; |
| |
| ret = true; |
| out: |
| kfree(elems); |
| kfree(bss_ies); |
| return ret; |
| } |
| |
| static int ieee80211_mgd_setup_link_sta(struct ieee80211_link_data *link, |
| struct sta_info *sta, |
| struct link_sta_info *link_sta, |
| struct cfg80211_bss *cbss) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| u32 rates = 0, basic_rates = 0; |
| bool have_higher_than_11mbit = false; |
| int min_rate = INT_MAX, min_rate_index = -1; |
| struct ieee80211_supported_band *sband; |
| |
| memcpy(link_sta->addr, cbss->bssid, ETH_ALEN); |
| memcpy(link_sta->pub->addr, cbss->bssid, ETH_ALEN); |
| |
| /* TODO: S1G Basic Rate Set is expressed elsewhere */ |
| if (cbss->channel->band == NL80211_BAND_S1GHZ) { |
| ieee80211_s1g_sta_rate_init(sta); |
| return 0; |
| } |
| |
| sband = local->hw.wiphy->bands[cbss->channel->band]; |
| |
| ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len, |
| &rates, &basic_rates, &have_higher_than_11mbit, |
| &min_rate, &min_rate_index); |
| |
| /* |
| * This used to be a workaround for basic rates missing |
| * in the association response frame. Now that we no |
| * longer use the basic rates from there, it probably |
| * doesn't happen any more, but keep the workaround so |
| * in case some *other* APs are buggy in different ways |
| * we can connect -- with a warning. |
| * Allow this workaround only in case the AP provided at least |
| * one rate. |
| */ |
| if (min_rate_index < 0) { |
| link_info(link, "No legacy rates in association response\n"); |
| return -EINVAL; |
| } else if (!basic_rates) { |
| link_info(link, "No basic rates, using min rate instead\n"); |
| basic_rates = BIT(min_rate_index); |
| } |
| |
| if (rates) |
| link_sta->pub->supp_rates[cbss->channel->band] = rates; |
| else |
| link_info(link, "No rates found, keeping mandatory only\n"); |
| |
| link->conf->basic_rates = basic_rates; |
| |
| /* cf. IEEE 802.11 9.2.12 */ |
| link->operating_11g_mode = sband->band == NL80211_BAND_2GHZ && |
| have_higher_than_11mbit; |
| |
| return 0; |
| } |
| |
| static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link, |
| struct cfg80211_bss *cbss) |
| { |
| struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp; |
| const struct element *ht_cap_elem, *vht_cap_elem; |
| const struct cfg80211_bss_ies *ies; |
| const struct ieee80211_ht_cap *ht_cap; |
| const struct ieee80211_vht_cap *vht_cap; |
| const struct ieee80211_he_cap_elem *he_cap; |
| const struct element *he_cap_elem; |
| u16 mcs_80_map, mcs_160_map; |
| int i, mcs_nss_size; |
| bool support_160; |
| u8 chains = 1; |
| |
| if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_HT) |
| return chains; |
| |
| ht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_CAPABILITY); |
| if (ht_cap_elem && ht_cap_elem->datalen >= sizeof(*ht_cap)) { |
| ht_cap = (void *)ht_cap_elem->data; |
| chains = ieee80211_mcs_to_chains(&ht_cap->mcs); |
| /* |
| * TODO: use "Tx Maximum Number Spatial Streams Supported" and |
| * "Tx Unequal Modulation Supported" fields. |
| */ |
| } |
| |
| if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_VHT) |
| return chains; |
| |
| vht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); |
| if (vht_cap_elem && vht_cap_elem->datalen >= sizeof(*vht_cap)) { |
| u8 nss; |
| u16 tx_mcs_map; |
| |
| vht_cap = (void *)vht_cap_elem->data; |
| tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map); |
| for (nss = 8; nss > 0; nss--) { |
| if (((tx_mcs_map >> (2 * (nss - 1))) & 3) != |
| IEEE80211_VHT_MCS_NOT_SUPPORTED) |
| break; |
| } |
| /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */ |
| chains = max(chains, nss); |
| } |
| |
| if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_HE) |
| return chains; |
| |
| ies = rcu_dereference(cbss->ies); |
| he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY, |
| ies->data, ies->len); |
| |
| if (!he_cap_elem || he_cap_elem->datalen < sizeof(*he_cap)) |
| return chains; |
| |
| /* skip one byte ext_tag_id */ |
| he_cap = (void *)(he_cap_elem->data + 1); |
| mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap); |
| |
| /* invalid HE IE */ |
| if (he_cap_elem->datalen < 1 + mcs_nss_size + sizeof(*he_cap)) |
| return chains; |
| |
| /* mcs_nss is right after he_cap info */ |
| he_mcs_nss_supp = (void *)(he_cap + 1); |
| |
| mcs_80_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80); |
| |
| for (i = 7; i >= 0; i--) { |
| u8 mcs_80 = mcs_80_map >> (2 * i) & 3; |
| |
| if (mcs_80 != IEEE80211_VHT_MCS_NOT_SUPPORTED) { |
| chains = max_t(u8, chains, i + 1); |
| break; |
| } |
| } |
| |
| support_160 = he_cap->phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G; |
| |
| if (!support_160) |
| return chains; |
| |
| mcs_160_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_160); |
| for (i = 7; i >= 0; i--) { |
| u8 mcs_160 = mcs_160_map >> (2 * i) & 3; |
| |
| if (mcs_160 != IEEE80211_VHT_MCS_NOT_SUPPORTED) { |
| chains = max_t(u8, chains, i + 1); |
| break; |
| } |
| } |
| |
| return chains; |
| } |
| |
| static void |
| ieee80211_determine_our_sta_mode(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| struct cfg80211_assoc_request *req, |
| bool wmm_used, int link_id, |
| struct ieee80211_conn_settings *conn) |
| { |
| struct ieee80211_sta_ht_cap sta_ht_cap = sband->ht_cap; |
| bool is_5ghz = sband->band == NL80211_BAND_5GHZ; |
| bool is_6ghz = sband->band == NL80211_BAND_6GHZ; |
| const struct ieee80211_sta_he_cap *he_cap; |
| const struct ieee80211_sta_eht_cap *eht_cap; |
| struct ieee80211_sta_vht_cap vht_cap; |
| |
| if (sband->band == NL80211_BAND_S1GHZ) { |
| conn->mode = IEEE80211_CONN_MODE_S1G; |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; |
| mlme_dbg(sdata, "operating as S1G STA\n"); |
| return; |
| } |
| |
| conn->mode = IEEE80211_CONN_MODE_LEGACY; |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; |
| |
| ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); |
| |
| if (req && req->flags & ASSOC_REQ_DISABLE_HT) { |
| mlme_link_id_dbg(sdata, link_id, |
| "HT disabled by flag, limiting to legacy\n"); |
| goto out; |
| } |
| |
| if (!wmm_used) { |
| mlme_link_id_dbg(sdata, link_id, |
| "WMM/QoS not supported, limiting to legacy\n"); |
| goto out; |
| } |
| |
| if (req) { |
| unsigned int i; |
| |
| for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { |
| if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || |
| req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || |
| req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { |
| netdev_info(sdata->dev, |
| "WEP/TKIP use, limiting to legacy\n"); |
| goto out; |
| } |
| } |
| } |
| |
| if (!sta_ht_cap.ht_supported && !is_6ghz) { |
| mlme_link_id_dbg(sdata, link_id, |
| "HT not supported (and not on 6 GHz), limiting to legacy\n"); |
| goto out; |
| } |
| |
| /* HT is fine */ |
| conn->mode = IEEE80211_CONN_MODE_HT; |
| conn->bw_limit = sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? |
| IEEE80211_CONN_BW_LIMIT_40 : |
| IEEE80211_CONN_BW_LIMIT_20; |
| |
| memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); |
| ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); |
| |
| if (req && req->flags & ASSOC_REQ_DISABLE_VHT) { |
| mlme_link_id_dbg(sdata, link_id, |
| "VHT disabled by flag, limiting to HT\n"); |
| goto out; |
| } |
| |
| if (vht_cap.vht_supported && is_5ghz) { |
| bool have_80mhz = false; |
| unsigned int i; |
| |
| if (conn->bw_limit == IEEE80211_CONN_BW_LIMIT_20) { |
| mlme_link_id_dbg(sdata, link_id, |
| "no 40 MHz support on 5 GHz, limiting to HT\n"); |
| goto out; |
| } |
| |
| /* Allow VHT if at least one channel on the sband supports 80 MHz */ |
| for (i = 0; i < sband->n_channels; i++) { |
| if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | |
| IEEE80211_CHAN_NO_80MHZ)) |
| continue; |
| |
| have_80mhz = true; |
| break; |
| } |
| |
| if (!have_80mhz) { |
| mlme_link_id_dbg(sdata, link_id, |
| "no 80 MHz channel support on 5 GHz, limiting to HT\n"); |
| goto out; |
| } |
| } else if (is_5ghz) { /* !vht_supported but on 5 GHz */ |
| mlme_link_id_dbg(sdata, link_id, |
| "no VHT support on 5 GHz, limiting to HT\n"); |
| goto out; |
| } |
| |
| /* VHT - if we have - is fine, including 80 MHz, check 160 below again */ |
| if (sband->band != NL80211_BAND_2GHZ) { |
| conn->mode = IEEE80211_CONN_MODE_VHT; |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_160; |
| } |
| |
| if (is_5ghz && |
| !(vht_cap.cap & (IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ))) { |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_80; |
| mlme_link_id_dbg(sdata, link_id, |
| "no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz"); |
| } |
| |
| if (req && req->flags & ASSOC_REQ_DISABLE_HE) { |
| mlme_link_id_dbg(sdata, link_id, |
| "HE disabled by flag, limiting to HT/VHT\n"); |
| goto out; |
| } |
| |
| he_cap = ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); |
| if (!he_cap) { |
| WARN_ON(is_6ghz); |
| mlme_link_id_dbg(sdata, link_id, |
| "no HE support, limiting to HT/VHT\n"); |
| goto out; |
| } |
| |
| /* so we have HE */ |
| conn->mode = IEEE80211_CONN_MODE_HE; |
| |
| /* check bandwidth */ |
| switch (sband->band) { |
| default: |
| case NL80211_BAND_2GHZ: |
| if (he_cap->he_cap_elem.phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G) |
| break; |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; |
| mlme_link_id_dbg(sdata, link_id, |
| "no 40 MHz HE cap in 2.4 GHz, limiting to 20 MHz\n"); |
| break; |
| case NL80211_BAND_5GHZ: |
| if (!(he_cap->he_cap_elem.phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)) { |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; |
| mlme_link_id_dbg(sdata, link_id, |
| "no 40/80 MHz HE cap in 5 GHz, limiting to 20 MHz\n"); |
| break; |
| } |
| if (!(he_cap->he_cap_elem.phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)) { |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_80); |
| mlme_link_id_dbg(sdata, link_id, |
| "no 160 MHz HE cap in 5 GHz, limiting to 80 MHz\n"); |
| } |
| break; |
| case NL80211_BAND_6GHZ: |
| if (he_cap->he_cap_elem.phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) |
| break; |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, |
| IEEE80211_CONN_BW_LIMIT_80); |
| mlme_link_id_dbg(sdata, link_id, |
| "no 160 MHz HE cap in 6 GHz, limiting to 80 MHz\n"); |
| break; |
| } |
| |
| if (req && req->flags & ASSOC_REQ_DISABLE_EHT) { |
| mlme_link_id_dbg(sdata, link_id, |
| "EHT disabled by flag, limiting to HE\n"); |
| goto out; |
| } |
| |
| eht_cap = ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif); |
| if (!eht_cap) { |
| mlme_link_id_dbg(sdata, link_id, |
| "no EHT support, limiting to HE\n"); |
| goto out; |
| } |
| |
| /* we have EHT */ |
| |
| conn->mode = IEEE80211_CONN_MODE_EHT; |
| |
| /* check bandwidth */ |
| if (is_6ghz && |
| eht_cap->eht_cap_elem.phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ) |
| conn->bw_limit = IEEE80211_CONN_BW_LIMIT_320; |
| else if (is_6ghz) |
| mlme_link_id_dbg(sdata, link_id, |
| "no EHT 320 MHz cap in 6 GHz, limiting to 160 MHz\n"); |
| |
| out: |
| mlme_link_id_dbg(sdata, link_id, |
| "determined local STA to be %s, BW limited to %d MHz\n", |
| ieee80211_conn_mode_str(conn->mode), |
| 20 * (1 << conn->bw_limit)); |
| } |
| |
| static void |
| ieee80211_determine_our_sta_mode_auth(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| struct cfg80211_auth_request *req, |
| bool wmm_used, |
| struct ieee80211_conn_settings *conn) |
| { |
| ieee80211_determine_our_sta_mode(sdata, sband, NULL, wmm_used, |
| req->link_id > 0 ? req->link_id : 0, |
| conn); |
| } |
| |
| static void |
| ieee80211_determine_our_sta_mode_assoc(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| struct cfg80211_assoc_request *req, |
| bool wmm_used, int link_id, |
| struct ieee80211_conn_settings *conn) |
| { |
| struct ieee80211_conn_settings tmp; |
| |
| WARN_ON(!req); |
| |
| ieee80211_determine_our_sta_mode(sdata, sband, req, wmm_used, link_id, |
| &tmp); |
| |
| conn->mode = min_t(enum ieee80211_conn_mode, |
| conn->mode, tmp.mode); |
| conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, |
| conn->bw_limit, tmp.bw_limit); |
| } |
| |
| static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_link_data *link, |
| int link_id, |
| struct cfg80211_bss *cbss, bool mlo, |
| struct ieee80211_conn_settings *conn) |
| { |
| struct ieee80211_local *local = sdata->local; |
| bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; |
| struct ieee80211_chan_req chanreq = {}; |
| struct ieee802_11_elems *elems; |
| int ret; |
| u32 i; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| rcu_read_lock(); |
| elems = ieee80211_determine_chan_mode(sdata, conn, cbss, link_id, |
| &chanreq); |
| |
| if (IS_ERR(elems)) { |
| rcu_read_unlock(); |
| return PTR_ERR(elems); |
| } |
| |
| if (mlo && !elems->ml_basic) { |
| sdata_info(sdata, "Rejecting MLO as it is not supported by AP\n"); |
| rcu_read_unlock(); |
| kfree(elems); |
| return -EINVAL; |
| } |
| |
| if (link && is_6ghz && conn->mode >= IEEE80211_CONN_MODE_HE) { |
| struct ieee80211_bss_conf *bss_conf; |
| u8 j = 0; |
| |
| bss_conf = link->conf; |
| |
| if (elems->pwr_constr_elem) |
| bss_conf->pwr_reduction = *elems->pwr_constr_elem; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) != |
| ARRAY_SIZE(elems->tx_pwr_env)); |
| |
| for (i = 0; i < elems->tx_pwr_env_num; i++) { |
| if (elems->tx_pwr_env_len[i] > sizeof(bss_conf->tx_pwr_env[j])) |
| continue; |
| |
| bss_conf->tx_pwr_env_num++; |
| memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i], |
| elems->tx_pwr_env_len[i]); |
| j++; |
| } |
| } |
| rcu_read_unlock(); |
| /* the element data was RCU protected so no longer valid anyway */ |
| kfree(elems); |
| elems = NULL; |
| |
| if (!link) |
| return 0; |
| |
| rcu_read_lock(); |
| link->needed_rx_chains = min(ieee80211_max_rx_chains(link, cbss), |
| local->rx_chains); |
| rcu_read_unlock(); |
| |
| /* |
| * If this fails (possibly due to channel context sharing |
| * on incompatible channels, e.g. 80+80 and 160 sharing the |
| * same control channel) try to use a smaller bandwidth. |
| */ |
| ret = ieee80211_link_use_channel(link, &chanreq, |
| IEEE80211_CHANCTX_SHARED); |
| |
| /* don't downgrade for 5 and 10 MHz channels, though. */ |
| if (chanreq.oper.width == NL80211_CHAN_WIDTH_5 || |
| chanreq.oper.width == NL80211_CHAN_WIDTH_10) |
| return ret; |
| |
| while (ret && chanreq.oper.width != NL80211_CHAN_WIDTH_20_NOHT) { |
| ieee80211_chanreq_downgrade(&chanreq, conn); |
| |
| ret = ieee80211_link_use_channel(link, &chanreq, |
| IEEE80211_CHANCTX_SHARED); |
| } |
| |
| return ret; |
| } |
| |
| static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies, |
| u8 *dtim_count, u8 *dtim_period) |
| { |
| const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len); |
| const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data, |
| ies->len); |
| const struct ieee80211_tim_ie *tim = NULL; |
| const struct ieee80211_bssid_index *idx; |
| bool valid = tim_ie && tim_ie[1] >= 2; |
| |
| if (valid) |
| tim = (void *)(tim_ie + 2); |
| |
| if (dtim_count) |
| *dtim_count = valid ? tim->dtim_count : 0; |
| |
| if (dtim_period) |
| *dtim_period = valid ? tim->dtim_period : 0; |
| |
| /* Check if value is overridden by non-transmitted profile */ |
| if (!idx_ie || idx_ie[1] < 3) |
| return valid; |
| |
| idx = (void *)(idx_ie + 2); |
| |
| if (dtim_count) |
| *dtim_count = idx->dtim_count; |
| |
| if (dtim_period) |
| *dtim_period = idx->dtim_period; |
| |
| return true; |
| } |
| |
| static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, |
| struct ieee802_11_elems *elems, |
| const u8 *elem_start, unsigned int elem_len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| struct ieee80211_local *local = sdata->local; |
| unsigned int link_id; |
| struct sta_info *sta; |
| u64 changed[IEEE80211_MLD_MAX_NUM_LINKS] = {}; |
| u16 valid_links = 0, dormant_links = 0; |
| int err; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| /* |
| * station info was already allocated and inserted before |
| * the association and should be available to us |
| */ |
| sta = sta_info_get(sdata, assoc_data->ap_addr); |
| if (WARN_ON(!sta)) |
| goto out_err; |
| |
| sta->sta.spp_amsdu = assoc_data->spp_amsdu; |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) { |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { |
| if (!assoc_data->link[link_id].bss) |
| continue; |
| |
| valid_links |= BIT(link_id); |
| if (assoc_data->link[link_id].disabled) |
| dormant_links |= BIT(link_id); |
| |
| if (link_id != assoc_data->assoc_link_id) { |
| err = ieee80211_sta_allocate_link(sta, link_id); |
| if (err) |
| goto out_err; |
| } |
| } |
| |
| ieee80211_vif_set_links(sdata, valid_links, dormant_links); |
| } |
| |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { |
| struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; |
| struct ieee80211_link_data *link; |
| struct link_sta_info *link_sta; |
| |
| if (!cbss) |
| continue; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (WARN_ON(!link)) |
| goto out_err; |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) |
| link_info(link, |
| "local address %pM, AP link address %pM%s\n", |
| link->conf->addr, |
| assoc_data->link[link_id].bss->bssid, |
| link_id == assoc_data->assoc_link_id ? |
| " (assoc)" : ""); |
| |
| link_sta = rcu_dereference_protected(sta->link[link_id], |
| lockdep_is_held(&local->hw.wiphy->mtx)); |
| if (WARN_ON(!link_sta)) |
| goto out_err; |
| |
| if (!link->u.mgd.have_beacon) { |
| const struct cfg80211_bss_ies *ies; |
| |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->beacon_ies); |
| if (ies) |
| link->u.mgd.have_beacon = true; |
| else |
| ies = rcu_dereference(cbss->ies); |
| ieee80211_get_dtim(ies, |
| &link->conf->sync_dtim_count, |
| &link->u.mgd.dtim_period); |
| link->conf->beacon_int = cbss->beacon_interval; |
| rcu_read_unlock(); |
| } |
| |
| link->conf->dtim_period = link->u.mgd.dtim_period ?: 1; |
| |
| if (link_id != assoc_data->assoc_link_id) { |
| link->u.mgd.conn = assoc_data->link[link_id].conn; |
| |
| err = ieee80211_prep_channel(sdata, link, link_id, cbss, |
| true, &link->u.mgd.conn); |
| if (err) { |
| link_info(link, "prep_channel failed\n"); |
| goto out_err; |
| } |
| } |
| |
| err = ieee80211_mgd_setup_link_sta(link, sta, link_sta, |
| assoc_data->link[link_id].bss); |
| if (err) |
| goto out_err; |
| |
| if (!ieee80211_assoc_config_link(link, link_sta, |
| assoc_data->link[link_id].bss, |
| mgmt, elem_start, elem_len, |
| &changed[link_id])) |
| goto out_err; |
| |
| if (assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) { |
| valid_links &= ~BIT(link_id); |
| ieee80211_sta_remove_link(sta, link_id); |
| continue; |
| } |
| |
| if (link_id != assoc_data->assoc_link_id) { |
| err = ieee80211_sta_activate_link(sta, link_id); |
| if (err) |
| goto out_err; |
| } |
| } |
| |
| /* links might have changed due to rejected ones, set them again */ |
| ieee80211_vif_set_links(sdata, valid_links, dormant_links); |
| |
| rate_control_rate_init(sta); |
| |
| if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) { |
| set_sta_flag(sta, WLAN_STA_MFP); |
| sta->sta.mfp = true; |
| } else { |
| sta->sta.mfp = false; |
| } |
| |
| ieee80211_sta_set_max_amsdu_subframes(sta, elems->ext_capab, |
| elems->ext_capab_len); |
| |
| sta->sta.wme = (elems->wmm_param || elems->s1g_capab) && |
| local->hw.queues >= IEEE80211_NUM_ACS; |
| |
| err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); |
| if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) |
| err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); |
| if (err) { |
| sdata_info(sdata, |
| "failed to move station %pM to desired state\n", |
| sta->sta.addr); |
| WARN_ON(__sta_info_destroy(sta)); |
| goto out_err; |
| } |
| |
| if (sdata->wdev.use_4addr) |
| drv_sta_set_4addr(local, sdata, &sta->sta, true); |
| |
| ieee80211_set_associated(sdata, assoc_data, changed); |
| |
| /* |
| * If we're using 4-addr mode, let the AP know that we're |
| * doing so, so that it can create the STA VLAN on its side |
| */ |
| if (ifmgd->use_4addr) |
| ieee80211_send_4addr_nullfunc(local, sdata); |
| |
| /* |
| * Start timer to probe the connection to the AP now. |
| * Also start the timer that will detect beacon loss. |
| */ |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| ieee80211_sta_reset_conn_monitor(sdata); |
| |
| return true; |
| out_err: |
| eth_zero_addr(sdata->vif.cfg.ap_addr); |
| return false; |
| } |
| |
| static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, |
| size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| u16 capab_info, status_code, aid; |
| struct ieee80211_elems_parse_params parse_params = { |
| .bss = NULL, |
| .link_id = -1, |
| .from_ap = true, |
| }; |
| struct ieee802_11_elems *elems; |
| int ac; |
| const u8 *elem_start; |
| unsigned int elem_len; |
| bool reassoc; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = ASSOC_EVENT, |
| }; |
| struct ieee80211_prep_tx_info info = {}; |
| struct cfg80211_rx_assoc_resp_data resp = { |
| .uapsd_queues = -1, |
| }; |
| u8 ap_mld_addr[ETH_ALEN] __aligned(2); |
| unsigned int link_id; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (!assoc_data) |
| return; |
| |
| parse_params.mode = |
| assoc_data->link[assoc_data->assoc_link_id].conn.mode; |
| |
| if (!ether_addr_equal(assoc_data->ap_addr, mgmt->bssid) || |
| !ether_addr_equal(assoc_data->ap_addr, mgmt->sa)) |
| return; |
| |
| /* |
| * AssocResp and ReassocResp have identical structure, so process both |
| * of them in this function. |
| */ |
| |
| if (len < 24 + 6) |
| return; |
| |
| reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control); |
| capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); |
| status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); |
| if (assoc_data->s1g) |
| elem_start = mgmt->u.s1g_assoc_resp.variable; |
| else |
| elem_start = mgmt->u.assoc_resp.variable; |
| |
| /* |
| * Note: this may not be perfect, AP might misbehave - if |
| * anyone needs to rely on perfect complete notification |
| * with the exact right subtype, then we need to track what |
| * we actually transmitted. |
| */ |
| info.subtype = reassoc ? IEEE80211_STYPE_REASSOC_REQ : |
| IEEE80211_STYPE_ASSOC_REQ; |
| |
| if (assoc_data->fils_kek_len && |
| fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0) |
| return; |
| |
| elem_len = len - (elem_start - (u8 *)mgmt); |
| parse_params.start = elem_start; |
| parse_params.len = elem_len; |
| elems = ieee802_11_parse_elems_full(&parse_params); |
| if (!elems) |
| goto notify_driver; |
| |
| if (elems->aid_resp) |
| aid = le16_to_cpu(elems->aid_resp->aid); |
| else if (assoc_data->s1g) |
| aid = 0; /* TODO */ |
| else |
| aid = le16_to_cpu(mgmt->u.assoc_resp.aid); |
| |
| /* |
| * The 5 MSB of the AID field are reserved |
| * (802.11-2016 9.4.1.8 AID field) |
| */ |
| aid &= 0x7ff; |
| |
| sdata_info(sdata, |
| "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", |
| reassoc ? "Rea" : "A", assoc_data->ap_addr, |
| capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); |
| |
| ifmgd->broken_ap = false; |
| |
| if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && |
| elems->timeout_int && |
| elems->timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { |
| u32 tu, ms; |
| |
| cfg80211_assoc_comeback(sdata->dev, assoc_data->ap_addr, |
| le32_to_cpu(elems->timeout_int->value)); |
| |
| tu = le32_to_cpu(elems->timeout_int->value); |
| ms = tu * 1024 / 1000; |
| sdata_info(sdata, |
| "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", |
| assoc_data->ap_addr, tu, ms); |
| assoc_data->timeout = jiffies + msecs_to_jiffies(ms); |
| assoc_data->timeout_started = true; |
| assoc_data->comeback = true; |
| if (ms > IEEE80211_ASSOC_TIMEOUT) |
| run_again(sdata, assoc_data->timeout); |
| goto notify_driver; |
| } |
| |
| if (status_code != WLAN_STATUS_SUCCESS) { |
| sdata_info(sdata, "%pM denied association (code=%d)\n", |
| assoc_data->ap_addr, status_code); |
| event.u.mlme.status = MLME_DENIED; |
| event.u.mlme.reason = status_code; |
| drv_event_callback(sdata->local, sdata, &event); |
| } else { |
| if (aid == 0 || aid > IEEE80211_MAX_AID) { |
| sdata_info(sdata, |
| "invalid AID value %d (out of range), turn off PS\n", |
| aid); |
| aid = 0; |
| ifmgd->broken_ap = true; |
| } |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) { |
| struct ieee80211_mle_basic_common_info *common; |
| |
| if (!elems->ml_basic) { |
| sdata_info(sdata, |
| "MLO association with %pM but no (basic) multi-link element in response!\n", |
| assoc_data->ap_addr); |
| goto abandon_assoc; |
| } |
| |
| common = (void *)elems->ml_basic->variable; |
| |
| if (memcmp(assoc_data->ap_addr, |
| common->mld_mac_addr, ETH_ALEN)) { |
| sdata_info(sdata, |
| "AP MLD MAC address mismatch: got %pM expected %pM\n", |
| common->mld_mac_addr, |
| assoc_data->ap_addr); |
| goto abandon_assoc; |
| } |
| |
| sdata->vif.cfg.eml_cap = |
| ieee80211_mle_get_eml_cap((const void *)elems->ml_basic); |
| sdata->vif.cfg.eml_med_sync_delay = |
| ieee80211_mle_get_eml_med_sync_delay((const void *)elems->ml_basic); |
| sdata->vif.cfg.mld_capa_op = |
| ieee80211_mle_get_mld_capa_op((const void *)elems->ml_basic); |
| } |
| |
| sdata->vif.cfg.aid = aid; |
| |
| if (!ieee80211_assoc_success(sdata, mgmt, elems, |
| elem_start, elem_len)) { |
| /* oops -- internal error -- send timeout for now */ |
| ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); |
| goto notify_driver; |
| } |
| event.u.mlme.status = MLME_SUCCESS; |
| drv_event_callback(sdata->local, sdata, &event); |
| sdata_info(sdata, "associated\n"); |
| |
| info.success = 1; |
| } |
| |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { |
| struct ieee80211_link_data *link; |
| |
| if (!assoc_data->link[link_id].bss) |
| continue; |
| |
| resp.links[link_id].bss = assoc_data->link[link_id].bss; |
| ether_addr_copy(resp.links[link_id].addr, |
| assoc_data->link[link_id].addr); |
| resp.links[link_id].status = assoc_data->link[link_id].status; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (!link) |
| continue; |
| |
| /* get uapsd queues configuration - same for all links */ |
| resp.uapsd_queues = 0; |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| if (link->tx_conf[ac].uapsd) |
| resp.uapsd_queues |= ieee80211_ac_to_qos_mask[ac]; |
| } |
| |
| if (ieee80211_vif_is_mld(&sdata->vif)) { |
| ether_addr_copy(ap_mld_addr, sdata->vif.cfg.ap_addr); |
| resp.ap_mld_addr = ap_mld_addr; |
| } |
| |
| ieee80211_destroy_assoc_data(sdata, |
| status_code == WLAN_STATUS_SUCCESS ? |
| ASSOC_SUCCESS : |
| ASSOC_REJECTED); |
| |
| resp.buf = (u8 *)mgmt; |
| resp.len = len; |
| resp.req_ies = ifmgd->assoc_req_ies; |
| resp.req_ies_len = ifmgd->assoc_req_ies_len; |
| cfg80211_rx_assoc_resp(sdata->dev, &resp); |
| notify_driver: |
| drv_mgd_complete_tx(sdata->local, sdata, &info); |
| kfree(elems); |
| return; |
| abandon_assoc: |
| ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); |
| goto notify_driver; |
| } |
| |
| static void ieee80211_rx_bss_info(struct ieee80211_link_data *link, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_bss *bss; |
| struct ieee80211_channel *channel; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| channel = ieee80211_get_channel_khz(local->hw.wiphy, |
| ieee80211_rx_status_to_khz(rx_status)); |
| if (!channel) |
| return; |
| |
| bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel); |
| if (bss) { |
| link->conf->beacon_rate = bss->beacon_rate; |
| ieee80211_rx_bss_put(local, bss); |
| } |
| } |
| |
| |
| static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_link_data *link, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; |
| struct ieee80211_if_managed *ifmgd; |
| struct ieee80211_rx_status *rx_status = (void *) skb->cb; |
| struct ieee80211_channel *channel; |
| size_t baselen, len = skb->len; |
| |
| ifmgd = &sdata->u.mgd; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| /* |
| * According to Draft P802.11ax D6.0 clause 26.17.2.3.2: |
| * "If a 6 GHz AP receives a Probe Request frame and responds with |
| * a Probe Response frame [..], the Address 1 field of the Probe |
| * Response frame shall be set to the broadcast address [..]" |
| * So, on 6GHz band we should also accept broadcast responses. |
| */ |
| channel = ieee80211_get_channel(sdata->local->hw.wiphy, |
| rx_status->freq); |
| if (!channel) |
| return; |
| |
| if (!ether_addr_equal(mgmt->da, sdata->vif.addr) && |
| (channel->band != NL80211_BAND_6GHZ || |
| !is_broadcast_ether_addr(mgmt->da))) |
| return; /* ignore ProbeResp to foreign address */ |
| |
| baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; |
| if (baselen > len) |
| return; |
| |
| ieee80211_rx_bss_info(link, mgmt, len, rx_status); |
| |
| if (ifmgd->associated && |
| ether_addr_equal(mgmt->bssid, link->u.mgd.bssid)) |
| ieee80211_reset_ap_probe(sdata); |
| } |
| |
| /* |
| * This is the canonical list of information elements we care about, |
| * the filter code also gives us all changes to the Microsoft OUI |
| * (00:50:F2) vendor IE which is used for WMM which we need to track, |
| * as well as the DTPC IE (part of the Cisco OUI) used for signaling |
| * changes to requested client power. |
| * |
| * We implement beacon filtering in software since that means we can |
| * avoid processing the frame here and in cfg80211, and userspace |
| * will not be able to tell whether the hardware supports it or not. |
| * |
| * XXX: This list needs to be dynamic -- userspace needs to be able to |
| * add items it requires. It also needs to be able to tell us to |
| * look out for other vendor IEs. |
| */ |
| static const u64 care_about_ies = |
| (1ULL << WLAN_EID_COUNTRY) | |
| (1ULL << WLAN_EID_ERP_INFO) | |
| (1ULL << WLAN_EID_CHANNEL_SWITCH) | |
| (1ULL << WLAN_EID_PWR_CONSTRAINT) | |
| (1ULL << WLAN_EID_HT_CAPABILITY) | |
| (1ULL << WLAN_EID_HT_OPERATION) | |
| (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN); |
| |
| static void ieee80211_handle_beacon_sig(struct ieee80211_link_data *link, |
| struct ieee80211_if_managed *ifmgd, |
| struct ieee80211_bss_conf *bss_conf, |
| struct ieee80211_local *local, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| |
| /* Track average RSSI from the Beacon frames of the current AP */ |
| |
| if (!link->u.mgd.tracking_signal_avg) { |
| link->u.mgd.tracking_signal_avg = true; |
| ewma_beacon_signal_init(&link->u.mgd.ave_beacon_signal); |
| link->u.mgd.last_cqm_event_signal = 0; |
| link->u.mgd.count_beacon_signal = 1; |
| link->u.mgd.last_ave_beacon_signal = 0; |
| } else { |
| link->u.mgd.count_beacon_signal++; |
| } |
| |
| ewma_beacon_signal_add(&link->u.mgd.ave_beacon_signal, |
| -rx_status->signal); |
| |
| if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && |
| link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { |
| int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal); |
| int last_sig = link->u.mgd.last_ave_beacon_signal; |
| struct ieee80211_event event = { |
| .type = RSSI_EVENT, |
| }; |
| |
| /* |
| * if signal crosses either of the boundaries, invoke callback |
| * with appropriate parameters |
| */ |
| if (sig > ifmgd->rssi_max_thold && |
| (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { |
| link->u.mgd.last_ave_beacon_signal = sig; |
| event.u.rssi.data = RSSI_EVENT_HIGH; |
| drv_event_callback(local, sdata, &event); |
| } else if (sig < ifmgd->rssi_min_thold && |
| (last_sig >= ifmgd->rssi_max_thold || |
| last_sig == 0)) { |
| link->u.mgd.last_ave_beacon_signal = sig; |
| event.u.rssi.data = RSSI_EVENT_LOW; |
| drv_event_callback(local, sdata, &event); |
| } |
| } |
| |
| if (bss_conf->cqm_rssi_thold && |
| link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && |
| !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { |
| int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal); |
| int last_event = link->u.mgd.last_cqm_event_signal; |
| int thold = bss_conf->cqm_rssi_thold; |
| int hyst = bss_conf->cqm_rssi_hyst; |
| |
| if (sig < thold && |
| (last_event == 0 || sig < last_event - hyst)) { |
| link->u.mgd.last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| sig, GFP_KERNEL); |
| } else if (sig > thold && |
| (last_event == 0 || sig > last_event + hyst)) { |
| link->u.mgd.last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| sig, GFP_KERNEL); |
| } |
| } |
| |
| if (bss_conf->cqm_rssi_low && |
| link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { |
| int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal); |
| int last_event = link->u.mgd.last_cqm_event_signal; |
| int low = bss_conf->cqm_rssi_low; |
| int high = bss_conf->cqm_rssi_high; |
| |
| if (sig < low && |
| (last_event == 0 || last_event >= low)) { |
| link->u.mgd.last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| sig, GFP_KERNEL); |
| } else if (sig > high && |
| (last_event == 0 || last_event <= high)) { |
| link->u.mgd.last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| sig, GFP_KERNEL); |
| } |
| } |
| } |
| |
| static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, |
| struct cfg80211_bss *bss) |
| { |
| if (ether_addr_equal(tx_bssid, bss->bssid)) |
| return true; |
| if (!bss->transmitted_bss) |
| return false; |
| return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); |
| } |
| |
| static void ieee80211_ml_reconf_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.ml_reconf_work.work); |
| u16 new_valid_links, new_active_links, new_dormant_links; |
| int ret; |
| |
| if (!sdata->u.mgd.removed_links) |
| return; |
| |
| sdata_info(sdata, |
| "MLO Reconfiguration: work: valid=0x%x, removed=0x%x\n", |
| sdata->vif.valid_links, sdata->u.mgd.removed_links); |
| |
| new_valid_links = sdata->vif.valid_links & ~sdata->u.mgd.removed_links; |
| if (new_valid_links == sdata->vif.valid_links) |
| return; |
| |
| if (!new_valid_links || |
| !(new_valid_links & ~sdata->vif.dormant_links)) { |
| sdata_info(sdata, "No valid links after reconfiguration\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| new_active_links = sdata->vif.active_links & ~sdata->u.mgd.removed_links; |
| if (new_active_links != sdata->vif.active_links) { |
| if (!new_active_links) |
| new_active_links = |
| BIT(ffs(new_valid_links & |
| ~sdata->vif.dormant_links) - 1); |
| |
| ret = ieee80211_set_active_links(&sdata->vif, new_active_links); |
| if (ret) { |
| sdata_info(sdata, |
| "Failed setting active links\n"); |
| goto out; |
| } |
| } |
| |
| new_dormant_links = sdata->vif.dormant_links & ~sdata->u.mgd.removed_links; |
| |
| ret = ieee80211_vif_set_links(sdata, new_valid_links, |
| new_dormant_links); |
| if (ret) |
| sdata_info(sdata, "Failed setting valid links\n"); |
| |
| ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_MLD_VALID_LINKS); |
| |
| out: |
| if (!ret) |
| cfg80211_links_removed(sdata->dev, sdata->u.mgd.removed_links); |
| else |
| __ieee80211_disconnect(sdata); |
| |
| sdata->u.mgd.removed_links = 0; |
| } |
| |
| static void ieee80211_ml_reconfiguration(struct ieee80211_sub_if_data *sdata, |
| struct ieee802_11_elems *elems) |
| { |
| const struct element *sub; |
| unsigned long removed_links = 0; |
| u16 link_removal_timeout[IEEE80211_MLD_MAX_NUM_LINKS] = {}; |
| u8 link_id; |
| u32 delay; |
| |
| if (!ieee80211_vif_is_mld(&sdata->vif) || !elems->ml_reconf) |
| return; |
| |
| /* Directly parse the sub elements as the common information doesn't |
| * hold any useful information. |
| */ |
| for_each_mle_subelement(sub, (const u8 *)elems->ml_reconf, |
| elems->ml_reconf_len) { |
| struct ieee80211_mle_per_sta_profile *prof = (void *)sub->data; |
| u8 *pos = prof->variable; |
| u16 control; |
| |
| if (sub->id != IEEE80211_MLE_SUBELEM_PER_STA_PROFILE) |
| continue; |
| |
| if (!ieee80211_mle_reconf_sta_prof_size_ok(sub->data, |
| sub->datalen)) |
| return; |
| |
| control = le16_to_cpu(prof->control); |
| link_id = control & IEEE80211_MLE_STA_RECONF_CONTROL_LINK_ID; |
| |
| removed_links |= BIT(link_id); |
| |
| /* the MAC address should not be included, but handle it */ |
| if (control & |
| IEEE80211_MLE_STA_RECONF_CONTROL_STA_MAC_ADDR_PRESENT) |
| pos += 6; |
| |
| /* According to Draft P802.11be_D3.0, the control should |
| * include the AP Removal Timer present. If the AP Removal Timer |
| * is not present assume immediate removal. |
| */ |
| if (control & |
| IEEE80211_MLE_STA_RECONF_CONTROL_AP_REM_TIMER_PRESENT) |
| link_removal_timeout[link_id] = le16_to_cpu(*(__le16 *)pos); |
| } |
| |
| removed_links &= sdata->vif.valid_links; |
| if (!removed_links) { |
| /* In case the removal was cancelled, abort it */ |
| if (sdata->u.mgd.removed_links) { |
| sdata->u.mgd.removed_links = 0; |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &sdata->u.mgd.ml_reconf_work); |
| } |
| return; |
| } |
| |
| delay = 0; |
| for_each_set_bit(link_id, &removed_links, IEEE80211_MLD_MAX_NUM_LINKS) { |
| struct ieee80211_bss_conf *link_conf = |
| sdata_dereference(sdata->vif.link_conf[link_id], sdata); |
| u32 link_delay; |
| |
| if (!link_conf) { |
| removed_links &= ~BIT(link_id); |
| continue; |
| } |
| |
| link_delay = link_conf->beacon_int * |
| link_removal_timeout[link_id]; |
| |
| if (!delay) |
| delay = link_delay; |
| else |
| delay = min(delay, link_delay); |
| } |
| |
| sdata->u.mgd.removed_links = removed_links; |
| wiphy_delayed_work_queue(sdata->local->hw.wiphy, |
| &sdata->u.mgd.ml_reconf_work, |
| TU_TO_JIFFIES(delay)); |
| } |
| |
| static int ieee80211_ttlm_set_links(struct ieee80211_sub_if_data *sdata, |
| u16 active_links, u16 dormant_links, |
| u16 suspended_links) |
| { |
| u64 changed = 0; |
| int ret; |
| |
| if (!active_links) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* If there is an active negotiated TTLM, it should be discarded by |
| * the new negotiated/advertised TTLM. |
| */ |
| if (sdata->vif.neg_ttlm.valid) { |
| memset(&sdata->vif.neg_ttlm, 0, sizeof(sdata->vif.neg_ttlm)); |
| sdata->vif.suspended_links = 0; |
| changed = BSS_CHANGED_MLD_TTLM; |
| } |
| |
| if (sdata->vif.active_links != active_links) { |
| /* usable links are affected when active_links are changed, |
| * so notify the driver about the status change |
| */ |
| changed |= BSS_CHANGED_MLD_VALID_LINKS; |
| active_links &= sdata->vif.active_links; |
| if (!active_links) |
| active_links = |
| BIT(__ffs(sdata->vif.valid_links & |
| ~dormant_links)); |
| ret = ieee80211_set_active_links(&sdata->vif, active_links); |
| if (ret) { |
| sdata_info(sdata, "Failed to set TTLM active links\n"); |
| goto out; |
| } |
| } |
| |
| ret = ieee80211_vif_set_links(sdata, sdata->vif.valid_links, |
| dormant_links); |
| if (ret) { |
| sdata_info(sdata, "Failed to set TTLM dormant links\n"); |
| goto out; |
| } |
| |
| sdata->vif.suspended_links = suspended_links; |
| if (sdata->vif.suspended_links) |
| changed |= BSS_CHANGED_MLD_TTLM; |
| |
| ieee80211_vif_cfg_change_notify(sdata, changed); |
| |
| out: |
| if (ret) |
| ieee80211_disconnect(&sdata->vif, false); |
| |
| return ret; |
| } |
| |
| static void ieee80211_tid_to_link_map_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| u16 new_active_links, new_dormant_links; |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.ttlm_work.work); |
| |
| new_active_links = sdata->u.mgd.ttlm_info.map & |
| sdata->vif.valid_links; |
| new_dormant_links = ~sdata->u.mgd.ttlm_info.map & |
| sdata->vif.valid_links; |
| |
| ieee80211_vif_set_links(sdata, sdata->vif.valid_links, 0); |
| if (ieee80211_ttlm_set_links(sdata, new_active_links, new_dormant_links, |
| 0)) |
| return; |
| |
| sdata->u.mgd.ttlm_info.active = true; |
| sdata->u.mgd.ttlm_info.switch_time = 0; |
| } |
| |
| static u16 ieee80211_get_ttlm(u8 bm_size, u8 *data) |
| { |
| if (bm_size == 1) |
| return *data; |
| else |
| return get_unaligned_le16(data); |
| } |
| |
| static int |
| ieee80211_parse_adv_t2l(struct ieee80211_sub_if_data *sdata, |
| const struct ieee80211_ttlm_elem *ttlm, |
| struct ieee80211_adv_ttlm_info *ttlm_info) |
| { |
| /* The element size was already validated in |
| * ieee80211_tid_to_link_map_size_ok() |
| */ |
| u8 control, link_map_presence, map_size, tid; |
| u8 *pos; |
| |
| memset(ttlm_info, 0, sizeof(*ttlm_info)); |
| pos = (void *)ttlm->optional; |
| control = ttlm->control; |
| |
| if ((control & IEEE80211_TTLM_CONTROL_DEF_LINK_MAP) || |
| !(control & IEEE80211_TTLM_CONTROL_SWITCH_TIME_PRESENT)) |
| return 0; |
| |
| if ((control & IEEE80211_TTLM_CONTROL_DIRECTION) != |
| IEEE80211_TTLM_DIRECTION_BOTH) { |
| sdata_info(sdata, "Invalid advertised T2L map direction\n"); |
| return -EINVAL; |
| } |
| |
| link_map_presence = *pos; |
| pos++; |
| |
| ttlm_info->switch_time = get_unaligned_le16(pos); |
| |
| /* Since ttlm_info->switch_time == 0 means no switch time, bump it |
| * by 1. |
| */ |
| if (!ttlm_info->switch_time) |
| ttlm_info->switch_time = 1; |
| |
| pos += 2; |
| |
| if (control & IEEE80211_TTLM_CONTROL_EXPECTED_DUR_PRESENT) { |
| ttlm_info->duration = pos[0] | pos[1] << 8 | pos[2] << 16; |
| pos += 3; |
| } |
| |
| if (control & IEEE80211_TTLM_CONTROL_LINK_MAP_SIZE) |
| map_size = 1; |
| else |
| map_size = 2; |
| |
| /* According to Draft P802.11be_D3.0 clause 35.3.7.1.7, an AP MLD shall |
| * not advertise a TID-to-link mapping that does not map all TIDs to the |
| * same link set, reject frame if not all links have mapping |
| */ |
| if (link_map_presence != 0xff) { |
| sdata_info(sdata, |
| "Invalid advertised T2L mapping presence indicator\n"); |
| return -EINVAL; |
| } |
| |
| ttlm_info->map = ieee80211_get_ttlm(map_size, pos); |
| if (!ttlm_info->map) { |
| sdata_info(sdata, |
| "Invalid advertised T2L map for TID 0\n"); |
| return -EINVAL; |
| } |
| |
| pos += map_size; |
| |
| for (tid = 1; tid < 8; tid++) { |
| u16 map = ieee80211_get_ttlm(map_size, pos); |
| |
| if (map != ttlm_info->map) { |
| sdata_info(sdata, "Invalid advertised T2L map for tid %d\n", |
| tid); |
| return -EINVAL; |
| } |
| |
| pos += map_size; |
| } |
| return 0; |
| } |
| |
| static void ieee80211_process_adv_ttlm(struct ieee80211_sub_if_data *sdata, |
| struct ieee802_11_elems *elems, |
| u64 beacon_ts) |
| { |
| u8 i; |
| int ret; |
| |
| if (!ieee80211_vif_is_mld(&sdata->vif)) |
| return; |
| |
| if (!elems->ttlm_num) { |
| if (sdata->u.mgd.ttlm_info.switch_time) { |
| /* if a planned TID-to-link mapping was cancelled - |
| * abort it |
| */ |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &sdata->u.mgd.ttlm_work); |
| } else if (sdata->u.mgd.ttlm_info.active) { |
| /* if no TID-to-link element, set to default mapping in |
| * which all TIDs are mapped to all setup links |
| */ |
| ret = ieee80211_vif_set_links(sdata, |
| sdata->vif.valid_links, |
| 0); |
| if (ret) { |
| sdata_info(sdata, "Failed setting valid/dormant links\n"); |
| return; |
| } |
| ieee80211_vif_cfg_change_notify(sdata, |
| BSS_CHANGED_MLD_VALID_LINKS); |
| } |
| memset(&sdata->u.mgd.ttlm_info, 0, |
| sizeof(sdata->u.mgd.ttlm_info)); |
| return; |
| } |
| |
| for (i = 0; i < elems->ttlm_num; i++) { |
| struct ieee80211_adv_ttlm_info ttlm_info; |
| u32 res; |
| |
| res = ieee80211_parse_adv_t2l(sdata, elems->ttlm[i], |
| &ttlm_info); |
| |
| if (res) { |
| __ieee80211_disconnect(sdata); |
| return; |
| } |
| |
| if (ttlm_info.switch_time) { |
| u16 beacon_ts_tu, st_tu, delay; |
| u32 delay_jiffies; |
| u64 mask; |
| |
| /* The t2l map switch time is indicated with a partial |
| * TSF value (bits 10 to 25), get the partial beacon TS |
| * as well, and calc the delay to the start time. |
| */ |
| mask = GENMASK_ULL(25, 10); |
| beacon_ts_tu = (beacon_ts & mask) >> 10; |
| st_tu = ttlm_info.switch_time; |
| delay = st_tu - beacon_ts_tu; |
| |
| /* |
| * If the switch time is far in the future, then it |
| * could also be the previous switch still being |
| * announced. |
| * We can simply ignore it for now, if it is a future |
| * switch the AP will continue to announce it anyway. |
| */ |
| if (delay > IEEE80211_ADV_TTLM_ST_UNDERFLOW) |
| return; |
| |
| delay_jiffies = TU_TO_JIFFIES(delay); |
| |
| /* Link switching can take time, so schedule it |
| * 100ms before to be ready on time |
| */ |
| if (delay_jiffies > IEEE80211_ADV_TTLM_SAFETY_BUFFER_MS) |
| delay_jiffies -= |
| IEEE80211_ADV_TTLM_SAFETY_BUFFER_MS; |
| else |
| delay_jiffies = 0; |
| |
| sdata->u.mgd.ttlm_info = ttlm_info; |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &sdata->u.mgd.ttlm_work); |
| wiphy_delayed_work_queue(sdata->local->hw.wiphy, |
| &sdata->u.mgd.ttlm_work, |
| delay_jiffies); |
| return; |
| } |
| } |
| } |
| |
| static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, |
| struct ieee80211_hdr *hdr, size_t len, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; |
| struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; |
| struct ieee80211_mgmt *mgmt = (void *) hdr; |
| size_t baselen; |
| struct ieee802_11_elems *elems; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *chan; |
| struct link_sta_info *link_sta; |
| struct sta_info *sta; |
| u64 changed = 0; |
| bool erp_valid; |
| u8 erp_value = 0; |
| u32 ncrc = 0; |
| u8 *bssid, *variable = mgmt->u.beacon.variable; |
| u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| struct ieee80211_elems_parse_params parse_params = { |
| .mode = link->u.mgd.conn.mode, |
| .link_id = -1, |
| .from_ap = true, |
| }; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| /* Process beacon from the current BSS */ |
| bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type); |
| if (ieee80211_is_s1g_beacon(mgmt->frame_control)) { |
| struct ieee80211_ext *ext = (void *) mgmt; |
| |
| if (ieee80211_is_s1g_short_beacon(ext->frame_control)) |
| variable = ext->u.s1g_short_beacon.variable; |
| else |
| variable = ext->u.s1g_beacon.variable; |
| } |
| |
| baselen = (u8 *) variable - (u8 *) mgmt; |
| if (baselen > len) |
| return; |
| |
| parse_params.start = variable; |
| parse_params.len = len - baselen; |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(link->conf->chanctx_conf); |
| if (!chanctx_conf) { |
| rcu_read_unlock(); |
| return; |
| } |
| |
| if (ieee80211_rx_status_to_khz(rx_status) != |
| ieee80211_channel_to_khz(chanctx_conf->def.chan)) { |
| rcu_read_unlock(); |
| return; |
| } |
| chan = chanctx_conf->def.chan; |
| rcu_read_unlock(); |
| |
| if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && |
| !WARN_ON(ieee80211_vif_is_mld(&sdata->vif)) && |
| ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->link[0].bss)) { |
| parse_params.bss = ifmgd->assoc_data->link[0].bss; |
| elems = ieee802_11_parse_elems_full(&parse_params); |
| if (!elems) |
| return; |
| |
| ieee80211_rx_bss_info(link, mgmt, len, rx_status); |
| |
| if (elems->dtim_period) |
| link->u.mgd.dtim_period = elems->dtim_period; |
| link->u.mgd.have_beacon = true; |
| ifmgd->assoc_data->need_beacon = false; |
| if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { |
| link->conf->sync_tsf = |
| le64_to_cpu(mgmt->u.beacon.timestamp); |
| link->conf->sync_device_ts = |
| rx_status->device_timestamp; |
| link->conf->sync_dtim_count = elems->dtim_count; |
| } |
| |
| if (elems->mbssid_config_ie) |
| bss_conf->profile_periodicity = |
| elems->mbssid_config_ie->profile_periodicity; |
| else |
| bss_conf->profile_periodicity = 0; |
| |
| if (elems->ext_capab_len >= 11 && |
| (elems->ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) |
| bss_conf->ema_ap = true; |
| else |
| bss_conf->ema_ap = false; |
| |
| /* continue assoc process */ |
| ifmgd->assoc_data->timeout = jiffies; |
| ifmgd->assoc_data->timeout_started = true; |
| run_again(sdata, ifmgd->assoc_data->timeout); |
| kfree(elems); |
| return; |
| } |
| |
| if (!ifmgd->associated || |
| !ieee80211_rx_our_beacon(bssid, link->conf->bss)) |
| return; |
| bssid = link->u.mgd.bssid; |
| |
| if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL)) |
| ieee80211_handle_beacon_sig(link, ifmgd, bss_conf, |
| local, rx_status); |
| |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { |
| mlme_dbg_ratelimited(sdata, |
| "cancelling AP probe due to a received beacon\n"); |
| ieee80211_reset_ap_probe(sdata); |
| } |
| |
| /* |
| * Push the beacon loss detection into the future since |
| * we are processing a beacon from the AP just now. |
| */ |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| |
| /* TODO: CRC urrently not calculated on S1G Beacon Compatibility |
| * element (which carries the beacon interval). Don't forget to add a |
| * bit to care_about_ies[] above if mac80211 is interested in a |
| * changing S1G element. |
| */ |
| if (!ieee80211_is_s1g_beacon(hdr->frame_control)) |
| ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); |
| parse_params.bss = link->conf->bss; |
| parse_params.filter = care_about_ies; |
| parse_params.crc = ncrc; |
| elems = ieee802_11_parse_elems_full(&parse_params); |
| if (!elems) |
| return; |
| ncrc = elems->crc; |
| |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && |
| ieee80211_check_tim(elems->tim, elems->tim_len, vif_cfg->aid)) { |
| if (local->hw.conf.dynamic_ps_timeout > 0) { |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, |
| IEEE80211_CONF_CHANGE_PS); |
| } |
| ieee80211_send_nullfunc(local, sdata, false); |
| } else if (!local->pspolling && sdata->u.mgd.powersave) { |
| local->pspolling = true; |
| |
| /* |
| * Here is assumed that the driver will be |
| * able to send ps-poll frame and receive a |
| * response even though power save mode is |
| * enabled, but some drivers might require |
| * to disable power save here. This needs |
| * to be investigated. |
| */ |
| ieee80211_send_pspoll(local, sdata); |
| } |
| } |
| |
| if (sdata->vif.p2p || |
| sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { |
| struct ieee80211_p2p_noa_attr noa = {}; |
| int ret; |
| |
| ret = cfg80211_get_p2p_attr(variable, |
| len - baselen, |
| IEEE80211_P2P_ATTR_ABSENCE_NOTICE, |
| (u8 *) &noa, sizeof(noa)); |
| if (ret >= 2) { |
| if (link->u.mgd.p2p_noa_index != noa.index) { |
| /* valid noa_attr and index changed */ |
| link->u.mgd.p2p_noa_index = noa.index; |
| memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); |
| changed |= BSS_CHANGED_P2P_PS; |
| /* |
| * make sure we update all information, the CRC |
| * mechanism doesn't look at P2P attributes. |
| */ |
| link->u.mgd.beacon_crc_valid = false; |
| } |
| } else if (link->u.mgd.p2p_noa_index != -1) { |
| /* noa_attr not found and we had valid noa_attr before */ |
| link->u.mgd.p2p_noa_index = -1; |
| memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); |
| changed |= BSS_CHANGED_P2P_PS; |
| link->u.mgd.beacon_crc_valid = false; |
| } |
| } |
| |
| /* |
| * Update beacon timing and dtim count on every beacon appearance. This |
| * will allow the driver to use the most updated values. Do it before |
| * comparing this one with last received beacon. |
| * IMPORTANT: These parameters would possibly be out of sync by the time |
| * the driver will use them. The synchronized view is currently |
| * guaranteed only in certain callbacks. |
| */ |
| if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) && |
| !ieee80211_is_s1g_beacon(hdr->frame_control)) { |
| link->conf->sync_tsf = |
| le64_to_cpu(mgmt->u.beacon.timestamp); |
| link->conf->sync_device_ts = |
| rx_status->device_timestamp; |
| link->conf->sync_dtim_count = elems->dtim_count; |
| } |
| |
| if ((ncrc == link->u.mgd.beacon_crc && link->u.mgd.beacon_crc_valid) || |
| ieee80211_is_s1g_short_beacon(mgmt->frame_control)) |
| goto free; |
| link->u.mgd.beacon_crc = ncrc; |
| link->u.mgd.beacon_crc_valid = true; |
| |
| ieee80211_rx_bss_info(link, mgmt, len, rx_status); |
| |
| ieee80211_sta_process_chanswitch(link, rx_status->mactime, |
| rx_status->device_timestamp, |
| elems, true); |
| |
| if (!link->u.mgd.disable_wmm_tracking && |
| ieee80211_sta_wmm_params(local, link, elems->wmm_param, |
| elems->wmm_param_len, |
| elems->mu_edca_param_set)) |
| changed |= BSS_CHANGED_QOS; |
| |
| /* |
| * If we haven't had a beacon before, tell the driver about the |
| * DTIM period (and beacon timing if desired) now. |
| */ |
| if (!link->u.mgd.have_beacon) { |
| /* a few bogus AP send dtim_period = 0 or no TIM IE */ |
| bss_conf->dtim_period = elems->dtim_period ?: 1; |
| |
| changed |= BSS_CHANGED_BEACON_INFO; |
| link->u.mgd.have_beacon = true; |
| |
| ieee80211_recalc_ps(local); |
| |
| ieee80211_recalc_ps_vif(sdata); |
| } |
| |
| if (elems->erp_info) { |
| erp_valid = true; |
| erp_value = elems->erp_info[0]; |
| } else { |
| erp_valid = false; |
| } |
| |
| if (!ieee80211_is_s1g_beacon(hdr->frame_control)) |
| changed |= ieee80211_handle_bss_capability(link, |
| le16_to_cpu(mgmt->u.beacon.capab_info), |
| erp_valid, erp_value); |
| |
| sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); |
| if (WARN_ON(!sta)) { |
| goto free; |
| } |
| link_sta = rcu_dereference_protected(sta->link[link->link_id], |
| lockdep_is_held(&local->hw.wiphy->mtx)); |
| if (WARN_ON(!link_sta)) { |
| goto free; |
| } |
| |
| if (WARN_ON(!link->conf->chanreq.oper.chan)) |
| goto free; |
| |
| sband = local->hw.wiphy->bands[link->conf->chanreq.oper.chan->band]; |
| |
| changed |= ieee80211_recalc_twt_req(sdata, sband, link, link_sta, elems); |
| |
| if (ieee80211_config_bw(link, elems, true, &changed)) { |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_DEAUTH_LEAVING, |
| true, deauth_buf); |
| ieee80211_report_disconnect(sdata, deauth_buf, |
| sizeof(deauth_buf), true, |
| WLAN_REASON_DEAUTH_LEAVING, |
| false); |
| goto free; |
| } |
| |
| if (elems->opmode_notif) |
| ieee80211_vht_handle_opmode(sdata, link_sta, |
| *elems->opmode_notif, |
| rx_status->band); |
| |
| changed |= ieee80211_handle_pwr_constr(link, chan, mgmt, |
| elems->country_elem, |
| elems->country_elem_len, |
| elems->pwr_constr_elem, |
| elems->cisco_dtpc_elem); |
| |
| ieee80211_ml_reconfiguration(sdata, elems); |
| ieee80211_process_adv_ttlm(sdata, elems, |
| le64_to_cpu(mgmt->u.beacon.timestamp)); |
| |
| ieee80211_link_info_change_notify(sdata, link, changed); |
| free: |
| kfree(elems); |
| } |
| |
| static void ieee80211_apply_neg_ttlm(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_neg_ttlm neg_ttlm) |
| { |
| u16 new_active_links, new_dormant_links, new_suspended_links, map = 0; |
| u8 i; |
| |
| for (i = 0; i < IEEE80211_TTLM_NUM_TIDS; i++) |
| map |= neg_ttlm.downlink[i] | neg_ttlm.uplink[i]; |
| |
| /* If there is an active TTLM, unset previously suspended links */ |
| if (sdata->vif.neg_ttlm.valid) |
| sdata->vif.dormant_links &= ~sdata->vif.suspended_links; |
| |
| /* exclude links that are already disabled by advertised TTLM */ |
| new_active_links = |
| map & sdata->vif.valid_links & ~sdata->vif.dormant_links; |
| new_suspended_links = |
| (~map & sdata->vif.valid_links) & ~sdata->vif.dormant_links; |
| new_dormant_links = sdata->vif.dormant_links | new_suspended_links; |
| if (ieee80211_ttlm_set_links(sdata, new_active_links, |
| new_dormant_links, new_suspended_links)) |
| return; |
| |
| sdata->vif.neg_ttlm = neg_ttlm; |
| sdata->vif.neg_ttlm.valid = true; |
| } |
| |
| static void ieee80211_neg_ttlm_timeout_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.neg_ttlm_timeout_work.work); |
| |
| sdata_info(sdata, |
| "No negotiated TTLM response from AP, disconnecting.\n"); |
| |
| __ieee80211_disconnect(sdata); |
| } |
| |
| static void |
| ieee80211_neg_ttlm_add_suggested_map(struct sk_buff *skb, |
| struct ieee80211_neg_ttlm *neg_ttlm) |
| { |
| u8 i, direction[IEEE80211_TTLM_MAX_CNT]; |
| |
| if (memcmp(neg_ttlm->downlink, neg_ttlm->uplink, |
| sizeof(neg_ttlm->downlink))) { |
| direction[0] = IEEE80211_TTLM_DIRECTION_DOWN; |
| direction[1] = IEEE80211_TTLM_DIRECTION_UP; |
| } else { |
| direction[0] = IEEE80211_TTLM_DIRECTION_BOTH; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(direction); i++) { |
| u8 tid, len, map_ind = 0, *len_pos, *map_ind_pos, *pos; |
| __le16 map; |
| |
| len = sizeof(struct ieee80211_ttlm_elem) + 1 + 1; |
| |
| pos = skb_put(skb, len + 2); |
| *pos++ = WLAN_EID_EXTENSION; |
| len_pos = pos++; |
| *pos++ = WLAN_EID_EXT_TID_TO_LINK_MAPPING; |
| *pos++ = direction[i]; |
| map_ind_pos = pos++; |
| for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) { |
| map = direction[i] == IEEE80211_TTLM_DIRECTION_UP ? |
| cpu_to_le16(neg_ttlm->uplink[tid]) : |
| cpu_to_le16(neg_ttlm->downlink[tid]); |
| if (!map) |
| continue; |
| |
| len += 2; |
| map_ind |= BIT(tid); |
| skb_put_data(skb, &map, sizeof(map)); |
| } |
| |
| *map_ind_pos = map_ind; |
| *len_pos = len; |
| |
| if (direction[i] == IEEE80211_TTLM_DIRECTION_BOTH) |
| break; |
| } |
| } |
| |
| static void |
| ieee80211_send_neg_ttlm_req(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_neg_ttlm *neg_ttlm, |
| u8 dialog_token) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_mgmt *mgmt; |
| struct sk_buff *skb; |
| int hdr_len = offsetofend(struct ieee80211_mgmt, u.action.u.ttlm_req); |
| int ttlm_max_len = 2 + 1 + sizeof(struct ieee80211_ttlm_elem) + 1 + |
| 2 * 2 * IEEE80211_TTLM_NUM_TIDS; |
| |
| skb = dev_alloc_skb(local->tx_headroom + hdr_len + ttlm_max_len); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, local->tx_headroom); |
| mgmt = skb_put_zero(skb, hdr_len); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_ACTION); |
| memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); |
| memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| |
| mgmt->u.action.category = WLAN_CATEGORY_PROTECTED_EHT; |
| mgmt->u.action.u.ttlm_req.action_code = |
| WLAN_PROTECTED_EHT_ACTION_TTLM_REQ; |
| mgmt->u.action.u.ttlm_req.dialog_token = dialog_token; |
| ieee80211_neg_ttlm_add_suggested_map(skb, neg_ttlm); |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| int ieee80211_req_neg_ttlm(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_ttlm_params *params) |
| { |
| struct ieee80211_neg_ttlm neg_ttlm = {}; |
| u8 i; |
| |
| if (!ieee80211_vif_is_mld(&sdata->vif) || |
| !(sdata->vif.cfg.mld_capa_op & |
| IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP)) |
| return -EINVAL; |
| |
| for (i = 0; i < IEEE80211_TTLM_NUM_TIDS; i++) { |
| if ((params->dlink[i] & ~sdata->vif.valid_links) || |
| (params->ulink[i] & ~sdata->vif.valid_links)) |
| return -EINVAL; |
| |
| neg_ttlm.downlink[i] = params->dlink[i]; |
| neg_ttlm.uplink[i] = params->ulink[i]; |
| } |
| |
| if (drv_can_neg_ttlm(sdata->local, sdata, &neg_ttlm) != |
| NEG_TTLM_RES_ACCEPT) |
| return -EINVAL; |
| |
| ieee80211_apply_neg_ttlm(sdata, neg_ttlm); |
| sdata->u.mgd.dialog_token_alloc++; |
| ieee80211_send_neg_ttlm_req(sdata, &sdata->vif.neg_ttlm, |
| sdata->u.mgd.dialog_token_alloc); |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &sdata->u.mgd.neg_ttlm_timeout_work); |
| wiphy_delayed_work_queue(sdata->local->hw.wiphy, |
| &sdata->u.mgd.neg_ttlm_timeout_work, |
| IEEE80211_NEG_TTLM_REQ_TIMEOUT); |
| return 0; |
| } |
| |
| static void |
| ieee80211_send_neg_ttlm_res(struct ieee80211_sub_if_data *sdata, |
| enum ieee80211_neg_ttlm_res ttlm_res, |
| u8 dialog_token, |
| struct ieee80211_neg_ttlm *neg_ttlm) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_mgmt *mgmt; |
| struct sk_buff *skb; |
| int hdr_len = offsetofend(struct ieee80211_mgmt, u.action.u.ttlm_res); |
| int ttlm_max_len = 2 + 1 + sizeof(struct ieee80211_ttlm_elem) + 1 + |
| 2 * 2 * IEEE80211_TTLM_NUM_TIDS; |
| |
| skb = dev_alloc_skb(local->tx_headroom + hdr_len + ttlm_max_len); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, local->tx_headroom); |
| mgmt = skb_put_zero(skb, hdr_len); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_ACTION); |
| memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); |
| memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| |
| mgmt->u.action.category = WLAN_CATEGORY_PROTECTED_EHT; |
| mgmt->u.action.u.ttlm_res.action_code = |
| WLAN_PROTECTED_EHT_ACTION_TTLM_RES; |
| mgmt->u.action.u.ttlm_res.dialog_token = dialog_token; |
| switch (ttlm_res) { |
| default: |
| WARN_ON(1); |
| fallthrough; |
| case NEG_TTLM_RES_REJECT: |
| mgmt->u.action.u.ttlm_res.status_code = |
| WLAN_STATUS_DENIED_TID_TO_LINK_MAPPING; |
| break; |
| case NEG_TTLM_RES_ACCEPT: |
| mgmt->u.action.u.ttlm_res.status_code = WLAN_STATUS_SUCCESS; |
| break; |
| case NEG_TTLM_RES_SUGGEST_PREFERRED: |
| mgmt->u.action.u.ttlm_res.status_code = |
| WLAN_STATUS_PREF_TID_TO_LINK_MAPPING_SUGGESTED; |
| ieee80211_neg_ttlm_add_suggested_map(skb, neg_ttlm); |
| break; |
| } |
| |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| static int |
| ieee80211_parse_neg_ttlm(struct ieee80211_sub_if_data *sdata, |
| const struct ieee80211_ttlm_elem *ttlm, |
| struct ieee80211_neg_ttlm *neg_ttlm, |
| u8 *direction) |
| { |
| u8 control, link_map_presence, map_size, tid; |
| u8 *pos; |
| |
| /* The element size was already validated in |
| * ieee80211_tid_to_link_map_size_ok() |
| */ |
| pos = (void *)ttlm->optional; |
| |
| control = ttlm->control; |
| |
| /* mapping switch time and expected duration fields are not expected |
| * in case of negotiated TTLM |
| */ |
| if (control & (IEEE80211_TTLM_CONTROL_SWITCH_TIME_PRESENT | |
| IEEE80211_TTLM_CONTROL_EXPECTED_DUR_PRESENT)) { |
| mlme_dbg(sdata, |
| "Invalid TTLM element in negotiated TTLM request\n"); |
| return -EINVAL; |
| } |
| |
| if (control & IEEE80211_TTLM_CONTROL_DEF_LINK_MAP) { |
| for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) { |
| neg_ttlm->downlink[tid] = sdata->vif.valid_links; |
| neg_ttlm->uplink[tid] = sdata->vif.valid_links; |
| } |
| *direction = IEEE80211_TTLM_DIRECTION_BOTH; |
| return 0; |
| } |
| |
| *direction = u8_get_bits(control, IEEE80211_TTLM_CONTROL_DIRECTION); |
| if (*direction != IEEE80211_TTLM_DIRECTION_DOWN && |
| *direction != IEEE80211_TTLM_DIRECTION_UP && |
| *direction != IEEE80211_TTLM_DIRECTION_BOTH) |
| return -EINVAL; |
| |
| link_map_presence = *pos; |
| pos++; |
| |
| if (control & IEEE80211_TTLM_CONTROL_LINK_MAP_SIZE) |
| map_size = 1; |
| else |
| map_size = 2; |
| |
| for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) { |
| u16 map; |
| |
| if (link_map_presence & BIT(tid)) { |
| map = ieee80211_get_ttlm(map_size, pos); |
| if (!map) { |
| mlme_dbg(sdata, |
| "No active links for TID %d", tid); |
| return -EINVAL; |
| } |
| } else { |
| map = 0; |
| } |
| |
| switch (*direction) { |
| case IEEE80211_TTLM_DIRECTION_BOTH: |
| neg_ttlm->downlink[tid] = map; |
| neg_ttlm->uplink[tid] = map; |
| break; |
| case IEEE80211_TTLM_DIRECTION_DOWN: |
| neg_ttlm->downlink[tid] = map; |
| break; |
| case IEEE80211_TTLM_DIRECTION_UP: |
| neg_ttlm->uplink[tid] = map; |
| break; |
| default: |
| return -EINVAL; |
| } |
| pos += map_size; |
| } |
| return 0; |
| } |
| |
| void ieee80211_process_neg_ttlm_req(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| u8 dialog_token, direction[IEEE80211_TTLM_MAX_CNT] = {}, i; |
| size_t ies_len; |
| enum ieee80211_neg_ttlm_res ttlm_res = NEG_TTLM_RES_ACCEPT; |
| struct ieee802_11_elems *elems = NULL; |
| struct ieee80211_neg_ttlm neg_ttlm = {}; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(direction) != ARRAY_SIZE(elems->ttlm)); |
| |
| if (!ieee80211_vif_is_mld(&sdata->vif)) |
| return; |
| |
| dialog_token = mgmt->u.action.u.ttlm_req.dialog_token; |
| ies_len = len - offsetof(struct ieee80211_mgmt, |
| u.action.u.ttlm_req.variable); |
| elems = ieee802_11_parse_elems(mgmt->u.action.u.ttlm_req.variable, |
| ies_len, true, NULL); |
| if (!elems) { |
| ttlm_res = NEG_TTLM_RES_REJECT; |
| goto out; |
| } |
| |
| for (i = 0; i < elems->ttlm_num; i++) { |
| if (ieee80211_parse_neg_ttlm(sdata, elems->ttlm[i], |
| &neg_ttlm, &direction[i]) || |
| (direction[i] == IEEE80211_TTLM_DIRECTION_BOTH && |
| elems->ttlm_num != 1)) { |
| ttlm_res = NEG_TTLM_RES_REJECT; |
| goto out; |
| } |
| } |
| |
| if (!elems->ttlm_num || |
| (elems->ttlm_num == 2 && direction[0] == direction[1])) { |
| ttlm_res = NEG_TTLM_RES_REJECT; |
| goto out; |
| } |
| |
| for (i = 0; i < IEEE80211_TTLM_NUM_TIDS; i++) { |
| if ((neg_ttlm.downlink[i] && |
| (neg_ttlm.downlink[i] & ~sdata->vif.valid_links)) || |
| (neg_ttlm.uplink[i] && |
| (neg_ttlm.uplink[i] & ~sdata->vif.valid_links))) { |
| ttlm_res = NEG_TTLM_RES_REJECT; |
| goto out; |
| } |
| } |
| |
| ttlm_res = drv_can_neg_ttlm(sdata->local, sdata, &neg_ttlm); |
| |
| if (ttlm_res != NEG_TTLM_RES_ACCEPT) |
| goto out; |
| |
| ieee80211_apply_neg_ttlm(sdata, neg_ttlm); |
| out: |
| kfree(elems); |
| ieee80211_send_neg_ttlm_res(sdata, ttlm_res, dialog_token, &neg_ttlm); |
| } |
| |
| void ieee80211_process_neg_ttlm_res(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| if (!ieee80211_vif_is_mld(&sdata->vif) || |
| mgmt->u.action.u.ttlm_req.dialog_token != |
| sdata->u.mgd.dialog_token_alloc) |
| return; |
| |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &sdata->u.mgd.neg_ttlm_timeout_work); |
| |
| /* MLD station sends a TID to link mapping request, mainly to handle |
| * BTM (BSS transition management) request, in which case it needs to |
| * restrict the active links set. |
| * In this case it's not expected that the MLD AP will reject the |
| * negotiated TTLM request. |
| * This can be better implemented in the future, to handle request |
| * rejections. |
| */ |
| if (mgmt->u.action.u.ttlm_res.status_code != WLAN_STATUS_SUCCESS) |
| __ieee80211_disconnect(sdata); |
| } |
| |
| void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_link_data *link = &sdata->deflink; |
| struct ieee80211_rx_status *rx_status; |
| struct ieee80211_hdr *hdr; |
| u16 fc; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| rx_status = (struct ieee80211_rx_status *) skb->cb; |
| hdr = (struct ieee80211_hdr *) skb->data; |
| fc = le16_to_cpu(hdr->frame_control); |
| |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_S1G_BEACON: |
| ieee80211_rx_mgmt_beacon(link, hdr, skb->len, rx_status); |
| break; |
| } |
| } |
| |
| void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_link_data *link = &sdata->deflink; |
| struct ieee80211_rx_status *rx_status; |
| struct ieee80211_mgmt *mgmt; |
| u16 fc; |
| int ies_len; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| rx_status = (struct ieee80211_rx_status *) skb->cb; |
| mgmt = (struct ieee80211_mgmt *) skb->data; |
| fc = le16_to_cpu(mgmt->frame_control); |
| |
| if (rx_status->link_valid) { |
| link = sdata_dereference(sdata->link[rx_status->link_id], |
| sdata); |
| if (!link) |
| return; |
| } |
| |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_BEACON: |
| ieee80211_rx_mgmt_beacon(link, (void *)mgmt, |
| skb->len, rx_status); |
| break; |
| case IEEE80211_STYPE_PROBE_RESP: |
| ieee80211_rx_mgmt_probe_resp(link, skb); |
| break; |
| case IEEE80211_STYPE_AUTH: |
| ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_DEAUTH: |
| ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_DISASSOC: |
| ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_ASSOC_RESP: |
| case IEEE80211_STYPE_REASSOC_RESP: |
| ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_ACTION: |
| if (!sdata->u.mgd.associated || |
| !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) |
| break; |
| |
| if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { |
| struct ieee802_11_elems *elems; |
| |
| ies_len = skb->len - |
| offsetof(struct ieee80211_mgmt, |
| u.action.u.chan_switch.variable); |
| |
| if (ies_len < 0) |
| break; |
| |
| /* CSA IE cannot be overridden, no need for BSSID */ |
| elems = ieee802_11_parse_elems( |
| mgmt->u.action.u.chan_switch.variable, |
| ies_len, true, NULL); |
| |
| if (elems && !elems->parse_error) |
| ieee80211_sta_process_chanswitch(link, |
| rx_status->mactime, |
| rx_status->device_timestamp, |
| elems, false); |
| kfree(elems); |
| } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { |
| struct ieee802_11_elems *elems; |
| |
| ies_len = skb->len - |
| offsetof(struct ieee80211_mgmt, |
| u.action.u.ext_chan_switch.variable); |
| |
| if (ies_len < 0) |
| break; |
| |
| /* |
| * extended CSA IE can't be overridden, no need for |
| * BSSID |
| */ |
| elems = ieee802_11_parse_elems( |
| mgmt->u.action.u.ext_chan_switch.variable, |
| ies_len, true, NULL); |
| |
| if (elems && !elems->parse_error) { |
| /* for the handling code pretend it was an IE */ |
| elems->ext_chansw_ie = |
| &mgmt->u.action.u.ext_chan_switch.data; |
| |
| ieee80211_sta_process_chanswitch(link, |
| rx_status->mactime, |
| rx_status->device_timestamp, |
| elems, false); |
| } |
| |
| kfree(elems); |
| } |
| break; |
| } |
| } |
| |
| static void ieee80211_sta_timer(struct timer_list *t) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| from_timer(sdata, t, u.mgd.timer); |
| |
| wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); |
| } |
| |
| void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, |
| u8 reason, bool tx) |
| { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, |
| tx, frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, |
| reason, false); |
| } |
| |
| static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; |
| u32 tx_flags = 0; |
| u16 trans = 1; |
| u16 status = 0; |
| struct ieee80211_prep_tx_info info = { |
| .subtype = IEEE80211_STYPE_AUTH, |
| }; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (WARN_ON_ONCE(!auth_data)) |
| return -EINVAL; |
| |
| auth_data->tries++; |
| |
| if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { |
| sdata_info(sdata, "authentication with %pM timed out\n", |
| auth_data->ap_addr); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); |
| |
| return -ETIMEDOUT; |
| } |
| |
| if (auth_data->algorithm == WLAN_AUTH_SAE) |
| info.duration = jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE); |
| |
| info.link_id = auth_data->link_id; |
| drv_mgd_prepare_tx(local, sdata, &info); |
| |
| sdata_info(sdata, "send auth to %pM (try %d/%d)\n", |
| auth_data->ap_addr, auth_data->tries, |
| IEEE80211_AUTH_MAX_TRIES); |
| |
| auth_data->expected_transaction = 2; |
| |
| if (auth_data->algorithm == WLAN_AUTH_SAE) { |
| trans = auth_data->sae_trans; |
| status = auth_data->sae_status; |
| auth_data->expected_transaction = trans; |
| } |
| |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_INTFL_MLME_CONN_TX; |
| |
| ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, |
| auth_data->data, auth_data->data_len, |
| auth_data->ap_addr, auth_data->ap_addr, |
| NULL, 0, 0, tx_flags); |
| |
| if (tx_flags == 0) { |
| if (auth_data->algorithm == WLAN_AUTH_SAE) |
| auth_data->timeout = jiffies + |
| IEEE80211_AUTH_TIMEOUT_SAE; |
| else |
| auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; |
| } else { |
| auth_data->timeout = |
| round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); |
| } |
| |
| auth_data->timeout_started = true; |
| run_again(sdata, auth_data->timeout); |
| |
| return 0; |
| } |
| |
| static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; |
| struct ieee80211_local *local = sdata->local; |
| int ret; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| assoc_data->tries++; |
| if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { |
| sdata_info(sdata, "association with %pM timed out\n", |
| assoc_data->ap_addr); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| cfg80211_unlink_bss(local->hw.wiphy, |
| assoc_data->link[assoc_data->assoc_link_id].bss); |
| |
| return -ETIMEDOUT; |
| } |
| |
| sdata_info(sdata, "associate with %pM (try %d/%d)\n", |
| assoc_data->ap_addr, assoc_data->tries, |
| IEEE80211_ASSOC_MAX_TRIES); |
| ret = ieee80211_send_assoc(sdata); |
| if (ret) |
| return ret; |
| |
| if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { |
| assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; |
| assoc_data->timeout_started = true; |
| run_again(sdata, assoc_data->timeout); |
| } else { |
| assoc_data->timeout = |
| round_jiffies_up(jiffies + |
| IEEE80211_ASSOC_TIMEOUT_LONG); |
| assoc_data->timeout_started = true; |
| run_again(sdata, assoc_data->timeout); |
| } |
| |
| return 0; |
| } |
| |
| void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, |
| __le16 fc, bool acked) |
| { |
| struct ieee80211_local *local = sdata->local; |
| |
| sdata->u.mgd.status_fc = fc; |
| sdata->u.mgd.status_acked = acked; |
| sdata->u.mgd.status_received = true; |
| |
| wiphy_work_queue(local->hw.wiphy, &sdata->work); |
| } |
| |
| void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (ifmgd->status_received) { |
| __le16 fc = ifmgd->status_fc; |
| bool status_acked = ifmgd->status_acked; |
| |
| ifmgd->status_received = false; |
| if (ifmgd->auth_data && ieee80211_is_auth(fc)) { |
| if (status_acked) { |
| if (ifmgd->auth_data->algorithm == |
| WLAN_AUTH_SAE) |
| ifmgd->auth_data->timeout = |
| jiffies + |
| IEEE80211_AUTH_TIMEOUT_SAE; |
| else |
| ifmgd->auth_data->timeout = |
| jiffies + |
| IEEE80211_AUTH_TIMEOUT_SHORT; |
| run_again(sdata, ifmgd->auth_data->timeout); |
| } else { |
| ifmgd->auth_data->timeout = jiffies - 1; |
| } |
| ifmgd->auth_data->timeout_started = true; |
| } else if (ifmgd->assoc_data && |
| !ifmgd->assoc_data->comeback && |
| (ieee80211_is_assoc_req(fc) || |
| ieee80211_is_reassoc_req(fc))) { |
| /* |
| * Update association timeout based on the TX status |
| * for the (Re)Association Request frame. Skip this if |
| * we have already processed a (Re)Association Response |
| * frame that indicated need for association comeback |
| * at a specific time in the future. This could happen |
| * if the TX status information is delayed enough for |
| * the response to be received and processed first. |
| */ |
| if (status_acked) { |
| ifmgd->assoc_data->timeout = |
| jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; |
| run_again(sdata, ifmgd->assoc_data->timeout); |
| } else { |
| ifmgd->assoc_data->timeout = jiffies - 1; |
| } |
| ifmgd->assoc_data->timeout_started = true; |
| } |
| } |
| |
| if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && |
| time_after(jiffies, ifmgd->auth_data->timeout)) { |
| if (ifmgd->auth_data->done || ifmgd->auth_data->waiting) { |
| /* |
| * ok ... we waited for assoc or continuation but |
| * userspace didn't do it, so kill the auth data |
| */ |
| ieee80211_destroy_auth_data(sdata, false); |
| } else if (ieee80211_auth(sdata)) { |
| u8 ap_addr[ETH_ALEN]; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = AUTH_EVENT, |
| .u.mlme.status = MLME_TIMEOUT, |
| }; |
| |
| memcpy(ap_addr, ifmgd->auth_data->ap_addr, ETH_ALEN); |
| |
| ieee80211_destroy_auth_data(sdata, false); |
| |
| cfg80211_auth_timeout(sdata->dev, ap_addr); |
| drv_event_callback(sdata->local, sdata, &event); |
| } |
| } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) |
| run_again(sdata, ifmgd->auth_data->timeout); |
| |
| if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && |
| time_after(jiffies, ifmgd->assoc_data->timeout)) { |
| if ((ifmgd->assoc_data->need_beacon && |
| !sdata->deflink.u.mgd.have_beacon) || |
| ieee80211_do_assoc(sdata)) { |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = ASSOC_EVENT, |
| .u.mlme.status = MLME_TIMEOUT, |
| }; |
| |
| ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); |
| drv_event_callback(sdata->local, sdata, &event); |
| } |
| } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) |
| run_again(sdata, ifmgd->assoc_data->timeout); |
| |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && |
| ifmgd->associated) { |
| u8 *bssid = sdata->deflink.u.mgd.bssid; |
| int max_tries; |
| |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| max_tries = max_nullfunc_tries; |
| else |
| max_tries = max_probe_tries; |
| |
| /* ACK received for nullfunc probing frame */ |
| if (!ifmgd->probe_send_count) |
| ieee80211_reset_ap_probe(sdata); |
| else if (ifmgd->nullfunc_failed) { |
| if (ifmgd->probe_send_count < max_tries) { |
| mlme_dbg(sdata, |
| "No ack for nullfunc frame to AP %pM, try %d/%i\n", |
| bssid, ifmgd->probe_send_count, |
| max_tries); |
| ieee80211_mgd_probe_ap_send(sdata); |
| } else { |
| mlme_dbg(sdata, |
| "No ack for nullfunc frame to AP %pM, disconnecting.\n", |
| bssid); |
| ieee80211_sta_connection_lost(sdata, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, |
| false); |
| } |
| } else if (time_is_after_jiffies(ifmgd->probe_timeout)) |
| run_again(sdata, ifmgd->probe_timeout); |
| else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { |
| mlme_dbg(sdata, |
| "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", |
| bssid, probe_wait_ms); |
| ieee80211_sta_connection_lost(sdata, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); |
| } else if (ifmgd->probe_send_count < max_tries) { |
| mlme_dbg(sdata, |
| "No probe response from AP %pM after %dms, try %d/%i\n", |
| bssid, probe_wait_ms, |
| ifmgd->probe_send_count, max_tries); |
| ieee80211_mgd_probe_ap_send(sdata); |
| } else { |
| /* |
| * We actually lost the connection ... or did we? |
| * Let's make sure! |
| */ |
| mlme_dbg(sdata, |
| "No probe response from AP %pM after %dms, disconnecting.\n", |
| bssid, probe_wait_ms); |
| |
| ieee80211_sta_connection_lost(sdata, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); |
| } |
| } |
| } |
| |
| static void ieee80211_sta_bcn_mon_timer(struct timer_list *t) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| from_timer(sdata, t, u.mgd.bcn_mon_timer); |
| |
| if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif))) |
| return; |
| |
| if (sdata->vif.bss_conf.csa_active && |
| !sdata->deflink.u.mgd.csa_waiting_bcn) |
| return; |
| |
| if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) |
| return; |
| |
| sdata->u.mgd.connection_loss = false; |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| |
| static void ieee80211_sta_conn_mon_timer(struct timer_list *t) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| from_timer(sdata, t, u.mgd.conn_mon_timer); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| unsigned long timeout; |
| |
| if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif))) |
| return; |
| |
| if (sdata->vif.bss_conf.csa_active && |
| !sdata->deflink.u.mgd.csa_waiting_bcn) |
| return; |
| |
| sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); |
| if (!sta) |
| return; |
| |
| timeout = sta->deflink.status_stats.last_ack; |
| if (time_before(sta->deflink.status_stats.last_ack, sta->deflink.rx_stats.last_rx)) |
| timeout = sta->deflink.rx_stats.last_rx; |
| timeout += IEEE80211_CONNECTION_IDLE_TIME; |
| |
| /* If timeout is after now, then update timer to fire at |
| * the later date, but do not actually probe at this time. |
| */ |
| if (time_is_after_jiffies(timeout)) { |
| mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout)); |
| return; |
| } |
| |
| wiphy_work_queue(local->hw.wiphy, &sdata->u.mgd.monitor_work); |
| } |
| |
| static void ieee80211_sta_monitor_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.monitor_work); |
| |
| ieee80211_mgd_probe_ap(sdata, false); |
| } |
| |
| static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) |
| { |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) { |
| __ieee80211_stop_poll(sdata); |
| |
| /* let's probe the connection once */ |
| if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| wiphy_work_queue(sdata->local->hw.wiphy, |
| &sdata->u.mgd.monitor_work); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (ifmgd->auth_data || ifmgd->assoc_data) { |
| const u8 *ap_addr = ifmgd->auth_data ? |
| ifmgd->auth_data->ap_addr : |
| ifmgd->assoc_data->ap_addr; |
| |
| /* |
| * If we are trying to authenticate / associate while suspending, |
| * cfg80211 won't know and won't actually abort those attempts, |
| * thus we need to do that ourselves. |
| */ |
| ieee80211_send_deauth_disassoc(sdata, ap_addr, ap_addr, |
| IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_DEAUTH_LEAVING, |
| false, frame_buf); |
| if (ifmgd->assoc_data) |
| ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); |
| if (ifmgd->auth_data) |
| ieee80211_destroy_auth_data(sdata, false); |
| cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, |
| IEEE80211_DEAUTH_FRAME_LEN, |
| false); |
| } |
| |
| /* This is a bit of a hack - we should find a better and more generic |
| * solution to this. Normally when suspending, cfg80211 will in fact |
| * deauthenticate. However, it doesn't (and cannot) stop an ongoing |
| * auth (not so important) or assoc (this is the problem) process. |
| * |
| * As a consequence, it can happen that we are in the process of both |
| * associating and suspending, and receive an association response |
| * after cfg80211 has checked if it needs to disconnect, but before |
| * we actually set the flag to drop incoming frames. This will then |
| * cause the workqueue flush to process the association response in |
| * the suspend, resulting in a successful association just before it |
| * tries to remove the interface from the driver, which now though |
| * has a channel context assigned ... this results in issues. |
| * |
| * To work around this (for now) simply deauth here again if we're |
| * now connected. |
| */ |
| if (ifmgd->associated && !sdata->local->wowlan) { |
| u8 bssid[ETH_ALEN]; |
| struct cfg80211_deauth_request req = { |
| .reason_code = WLAN_REASON_DEAUTH_LEAVING, |
| .bssid = bssid, |
| }; |
| |
| memcpy(bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); |
| ieee80211_mgd_deauth(sdata, &req); |
| } |
| } |
| #endif |
| |
| void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| if (!ifmgd->associated) |
| return; |
| |
| if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { |
| sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; |
| mlme_dbg(sdata, "driver requested disconnect after resume\n"); |
| ieee80211_sta_connection_lost(sdata, |
| WLAN_REASON_UNSPECIFIED, |
| true); |
| return; |
| } |
| |
| if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) { |
| sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART; |
| mlme_dbg(sdata, "driver requested disconnect after hardware restart\n"); |
| ieee80211_sta_connection_lost(sdata, |
| WLAN_REASON_UNSPECIFIED, |
| true); |
| return; |
| } |
| } |
| |
| static void ieee80211_request_smps_mgd_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_link_data *link = |
| container_of(work, struct ieee80211_link_data, |
| u.mgd.request_smps_work); |
| |
| __ieee80211_request_smps_mgd(link->sdata, link, |
| link->u.mgd.driver_smps_mode); |
| } |
| |
| /* interface setup */ |
| void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| wiphy_work_init(&ifmgd->monitor_work, ieee80211_sta_monitor_work); |
| wiphy_work_init(&ifmgd->beacon_connection_loss_work, |
| ieee80211_beacon_connection_loss_work); |
| wiphy_work_init(&ifmgd->csa_connection_drop_work, |
| ieee80211_csa_connection_drop_work); |
| wiphy_delayed_work_init(&ifmgd->tdls_peer_del_work, |
| ieee80211_tdls_peer_del_work); |
| wiphy_delayed_work_init(&ifmgd->ml_reconf_work, |
| ieee80211_ml_reconf_work); |
| timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0); |
| timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0); |
| timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0); |
| wiphy_delayed_work_init(&ifmgd->tx_tspec_wk, |
| ieee80211_sta_handle_tspec_ac_params_wk); |
| wiphy_delayed_work_init(&ifmgd->ttlm_work, |
| ieee80211_tid_to_link_map_work); |
| wiphy_delayed_work_init(&ifmgd->neg_ttlm_timeout_work, |
| ieee80211_neg_ttlm_timeout_work); |
| |
| ifmgd->flags = 0; |
| ifmgd->powersave = sdata->wdev.ps; |
| ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; |
| ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; |
| /* Setup TDLS data */ |
| spin_lock_init(&ifmgd->teardown_lock); |
| ifmgd->teardown_skb = NULL; |
| ifmgd->orig_teardown_skb = NULL; |
| ifmgd->mcast_seq_last = IEEE80211_SN_MODULO; |
| } |
| |
| static void ieee80211_recalc_smps_work(struct wiphy *wiphy, |
| struct wiphy_work *work) |
| { |
| struct ieee80211_link_data *link = |
| container_of(work, struct ieee80211_link_data, |
| u.mgd.recalc_smps); |
| |
| ieee80211_recalc_smps(link->sdata, link); |
| } |
| |
| void ieee80211_mgd_setup_link(struct ieee80211_link_data *link) |
| { |
| struct ieee80211_sub_if_data *sdata = link->sdata; |
| struct ieee80211_local *local = sdata->local; |
| unsigned int link_id = link->link_id; |
| |
| link->u.mgd.p2p_noa_index = -1; |
| link->conf->bssid = link->u.mgd.bssid; |
| link->smps_mode = IEEE80211_SMPS_OFF; |
| |
| wiphy_work_init(&link->u.mgd.request_smps_work, |
| ieee80211_request_smps_mgd_work); |
| wiphy_work_init(&link->u.mgd.recalc_smps, |
| ieee80211_recalc_smps_work); |
| if (local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) |
| link->u.mgd.req_smps = IEEE80211_SMPS_AUTOMATIC; |
| else |
| link->u.mgd.req_smps = IEEE80211_SMPS_OFF; |
| |
| wiphy_delayed_work_init(&link->u.mgd.chswitch_work, |
| ieee80211_chswitch_work); |
| |
| if (sdata->u.mgd.assoc_data) |
| ether_addr_copy(link->conf->addr, |
| sdata->u.mgd.assoc_data->link[link_id].addr); |
| else if (!is_valid_ether_addr(link->conf->addr)) |
| eth_random_addr(link->conf->addr); |
| } |
| |
| /* scan finished notification */ |
| void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| /* Restart STA timers */ |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { |
| if (ieee80211_sdata_running(sdata)) |
| ieee80211_restart_sta_timer(sdata); |
| } |
| rcu_read_unlock(); |
| } |
| |
| static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *cbss, s8 link_id, |
| const u8 *ap_mld_addr, bool assoc, |
| struct ieee80211_conn_settings *conn, |
| bool override) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| struct sta_info *new_sta = NULL; |
| struct ieee80211_link_data *link; |
| bool have_sta = false; |
| bool mlo; |
| int err; |
| |
| if (link_id >= 0) { |
| mlo = true; |
| if (WARN_ON(!ap_mld_addr)) |
| return -EINVAL; |
| err = ieee80211_vif_set_links(sdata, BIT(link_id), 0); |
| } else { |
| if (WARN_ON(ap_mld_addr)) |
| return -EINVAL; |
| ap_mld_addr = cbss->bssid; |
| err = ieee80211_vif_set_links(sdata, 0, 0); |
| link_id = 0; |
| mlo = false; |
| } |
| |
| if (err) |
| return err; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (WARN_ON(!link)) { |
| err = -ENOLINK; |
| goto out_err; |
| } |
| |
| if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) { |
| err = -EINVAL; |
| goto out_err; |
| } |
| |
| /* If a reconfig is happening, bail out */ |
| if (local->in_reconfig) { |
| err = -EBUSY; |
| goto out_err; |
| } |
| |
| if (assoc) { |
| rcu_read_lock(); |
| have_sta = sta_info_get(sdata, ap_mld_addr); |
| rcu_read_unlock(); |
| } |
| |
| if (!have_sta) { |
| if (mlo) |
| new_sta = sta_info_alloc_with_link(sdata, ap_mld_addr, |
| link_id, cbss->bssid, |
| GFP_KERNEL); |
| else |
| new_sta = sta_info_alloc(sdata, ap_mld_addr, GFP_KERNEL); |
| |
| if (!new_sta) { |
| err = -ENOMEM; |
| goto out_err; |
| } |
| |
| new_sta->sta.mlo = mlo; |
| } |
| |
| /* |
| * Set up the information for the new channel before setting the |
| * new channel. We can't - completely race-free - change the basic |
| * rates bitmap and the channel (sband) that it refers to, but if |
| * we set it up before we at least avoid calling into the driver's |
| * bss_info_changed() method with invalid information (since we do |
| * call that from changing the channel - only for IDLE and perhaps |
| * some others, but ...). |
| * |
| * So to avoid that, just set up all the new information before the |
| * channel, but tell the driver to apply it only afterwards, since |
| * it might need the new channel for that. |
| */ |
| if (new_sta) { |
| const struct cfg80211_bss_ies *ies; |
| struct link_sta_info *link_sta; |
| |
| rcu_read_lock(); |
| link_sta = rcu_dereference(new_sta->link[link_id]); |
| if (WARN_ON(!link_sta)) { |
| rcu_read_unlock(); |
| sta_info_free(local, new_sta); |
| err = -EINVAL; |
| goto out_err; |
| } |
| |
| err = ieee80211_mgd_setup_link_sta(link, new_sta, |
| link_sta, cbss); |
| if (err) { |
| rcu_read_unlock(); |
| sta_info_free(local, new_sta); |
| goto out_err; |
| } |
| |
| memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN); |
| |
| /* set timing information */ |
| link->conf->beacon_int = cbss->beacon_interval; |
| ies = rcu_dereference(cbss->beacon_ies); |
| if (ies) { |
| link->conf->sync_tsf = ies->tsf; |
| link->conf->sync_device_ts = |
| bss->device_ts_beacon; |
| |
| ieee80211_get_dtim(ies, |
| &link->conf->sync_dtim_count, |
| NULL); |
| } else if (!ieee80211_hw_check(&sdata->local->hw, |
| TIMING_BEACON_ONLY)) { |
| ies = rcu_dereference(cbss->proberesp_ies); |
| /* must be non-NULL since beacon IEs were NULL */ |
| link->conf->sync_tsf = ies->tsf; |
| link->conf->sync_device_ts = |
| bss->device_ts_presp; |
| link->conf->sync_dtim_count = 0; |
| } else { |
| link->conf->sync_tsf = 0; |
| link->conf->sync_device_ts = 0; |
| link->conf->sync_dtim_count = 0; |
| } |
| rcu_read_unlock(); |
| } |
| |
| if (new_sta || override) { |
| /* |
| * Only set this if we're also going to calculate the AP |
| * settings etc., otherwise this was set before in a |
| * previous call. Note override is set to %true in assoc |
| * if the settings were changed. |
| */ |
| link->u.mgd.conn = *conn; |
| err = ieee80211_prep_channel(sdata, link, link->link_id, cbss, |
| mlo, &link->u.mgd.conn); |
| if (err) { |
| if (new_sta) |
| sta_info_free(local, new_sta); |
| goto out_err; |
| } |
| /* pass out for use in assoc */ |
| *conn = link->u.mgd.conn; |
| } |
| |
| if (new_sta) { |
| /* |
| * tell driver about BSSID, basic rates and timing |
| * this was set up above, before setting the channel |
| */ |
| ieee80211_link_info_change_notify(sdata, link, |
| BSS_CHANGED_BSSID | |
| BSS_CHANGED_BASIC_RATES | |
| BSS_CHANGED_BEACON_INT); |
| |
| if (assoc) |
| sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); |
| |
| err = sta_info_insert(new_sta); |
| new_sta = NULL; |
| if (err) { |
| sdata_info(sdata, |
| "failed to insert STA entry for the AP (error %d)\n", |
| err); |
| goto out_release_chan; |
| } |
| } else |
| WARN_ON_ONCE(!ether_addr_equal(link->u.mgd.bssid, cbss->bssid)); |
| |
| /* Cancel scan to ensure that nothing interferes with connection */ |
| if (local->scanning) |
| ieee80211_scan_cancel(local); |
| |
| return 0; |
| |
| out_release_chan: |
| ieee80211_link_release_channel(link); |
| out_err: |
| ieee80211_vif_set_links(sdata, 0, 0); |
| return err; |
| } |
| |
| static bool ieee80211_mgd_csa_present(struct ieee80211_sub_if_data *sdata, |
| const struct cfg80211_bss_ies *ies, |
| u8 cur_channel, bool ignore_ecsa) |
| { |
| const struct element *csa_elem, *ecsa_elem; |
| struct ieee80211_channel_sw_ie *csa = NULL; |
| struct ieee80211_ext_chansw_ie *ecsa = NULL; |
| |
| if (!ies) |
| return false; |
| |
| csa_elem = cfg80211_find_elem(WLAN_EID_CHANNEL_SWITCH, |
| ies->data, ies->len); |
| if (csa_elem && csa_elem->datalen == sizeof(*csa)) |
| csa = (void *)csa_elem->data; |
| |
| ecsa_elem = cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, |
| ies->data, ies->len); |
| if (ecsa_elem && ecsa_elem->datalen == sizeof(*ecsa)) |
| ecsa = (void *)ecsa_elem->data; |
| |
| if (csa && csa->count == 0) |
| csa = NULL; |
| if (csa && !csa->mode && csa->new_ch_num == cur_channel) |
| csa = NULL; |
| |
| if (ecsa && ecsa->count == 0) |
| ecsa = NULL; |
| if (ecsa && !ecsa->mode && ecsa->new_ch_num == cur_channel) |
| ecsa = NULL; |
| |
| if (ignore_ecsa && ecsa) { |
| sdata_info(sdata, |
| "Ignoring ECSA in probe response - was considered stuck!\n"); |
| return csa; |
| } |
| |
| return csa || ecsa; |
| } |
| |
| static bool ieee80211_mgd_csa_in_process(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *bss) |
| { |
| u8 cur_channel; |
| bool ret; |
| |
| cur_channel = ieee80211_frequency_to_channel(bss->channel->center_freq); |
| |
| rcu_read_lock(); |
| if (ieee80211_mgd_csa_present(sdata, |
| rcu_dereference(bss->beacon_ies), |
| cur_channel, false)) { |
| ret = true; |
| goto out; |
| } |
| |
| if (ieee80211_mgd_csa_present(sdata, |
| rcu_dereference(bss->proberesp_ies), |
| cur_channel, bss->proberesp_ecsa_stuck)) { |
| ret = true; |
| goto out; |
| } |
| |
| ret = false; |
| out: |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /* config hooks */ |
| int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_auth_request *req) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_auth_data *auth_data; |
| struct ieee80211_conn_settings conn; |
| struct ieee80211_link_data *link; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_bss *bss; |
| u16 auth_alg; |
| int err; |
| bool cont_auth, wmm_used; |
| |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); |
| |
| /* prepare auth data structure */ |
| |
| switch (req->auth_type) { |
| case NL80211_AUTHTYPE_OPEN_SYSTEM: |
| auth_alg = WLAN_AUTH_OPEN; |
| break; |
| case NL80211_AUTHTYPE_SHARED_KEY: |
| if (fips_enabled) |
| return -EOPNOTSUPP; |
| auth_alg = WLAN_AUTH_SHARED_KEY; |
| break; |
| case NL80211_AUTHTYPE_FT: |
| auth_alg = WLAN_AUTH_FT; |
| break; |
| case NL80211_AUTHTYPE_NETWORK_EAP: |
| auth_alg = WLAN_AUTH_LEAP; |
| break; |
| case NL80211_AUTHTYPE_SAE: |
| auth_alg = WLAN_AUTH_SAE; |
| break; |
| case NL80211_AUTHTYPE_FILS_SK: |
| auth_alg = WLAN_AUTH_FILS_SK; |
| break; |
| case NL80211_AUTHTYPE_FILS_SK_PFS: |
| auth_alg = WLAN_AUTH_FILS_SK_PFS; |
| break; |
| case NL80211_AUTHTYPE_FILS_PK: |
| auth_alg = WLAN_AUTH_FILS_PK; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| if (ifmgd->assoc_data) |
| return -EBUSY; |
| |
| if (ieee80211_mgd_csa_in_process(sdata, req->bss)) { |
| sdata_info(sdata, "AP is in CSA process, reject auth\n"); |
| return -EINVAL; |
| } |
| |
| auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + |
| req->ie_len, GFP_KERNEL); |
| if (!auth_data) |
| return -ENOMEM; |
| |
| memcpy(auth_data->ap_addr, |
| req->ap_mld_addr ?: req->bss->bssid, |
| ETH_ALEN); |
| auth_data->bss = req->bss; |
| auth_data->link_id = req->link_id; |
| |
| if (req->auth_data_len >= 4) { |
| if (req->auth_type == NL80211_AUTHTYPE_SAE) { |
| __le16 *pos = (__le16 *) req->auth_data; |
| |
| auth_data->sae_trans = le16_to_cpu(pos[0]); |
| auth_data->sae_status = le16_to_cpu(pos[1]); |
| } |
| memcpy(auth_data->data, req->auth_data + 4, |
| req->auth_data_len - 4); |
| auth_data->data_len += req->auth_data_len - 4; |
| } |
| |
| /* Check if continuing authentication or trying to authenticate with the |
| * same BSS that we were in the process of authenticating with and avoid |
| * removal and re-addition of the STA entry in |
| * ieee80211_prep_connection(). |
| */ |
| cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss && |
| ifmgd->auth_data->link_id == req->link_id; |
| |
| if (req->ie && req->ie_len) { |
| memcpy(&auth_data->data[auth_data->data_len], |
| req->ie, req->ie_len); |
| auth_data->data_len += req->ie_len; |
| } |
| |
| if (req->key && req->key_len) { |
| auth_data->key_len = req->key_len; |
| auth_data->key_idx = req->key_idx; |
| memcpy(auth_data->key, req->key, req->key_len); |
| } |
| |
| auth_data->algorithm = auth_alg; |
| |
| /* try to authenticate/probe */ |
| |
| if (ifmgd->auth_data) { |
| if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) { |
| auth_data->peer_confirmed = |
| ifmgd->auth_data->peer_confirmed; |
| } |
| ieee80211_destroy_auth_data(sdata, cont_auth); |
| } |
| |
| /* prep auth_data so we don't go into idle on disassoc */ |
| ifmgd->auth_data = auth_data; |
| |
| /* If this is continuation of an ongoing SAE authentication exchange |
| * (i.e., request to send SAE Confirm) and the peer has already |
| * confirmed, mark authentication completed since we are about to send |
| * out SAE Confirm. |
| */ |
| if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE && |
| auth_data->peer_confirmed && auth_data->sae_trans == 2) |
| ieee80211_mark_sta_auth(sdata); |
| |
| if (ifmgd->associated) { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_info(sdata, |
| "disconnect from AP %pM for new auth to %pM\n", |
| sdata->vif.cfg.ap_addr, auth_data->ap_addr); |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_UNSPECIFIED, |
| false, frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| WLAN_REASON_UNSPECIFIED, |
| false); |
| } |
| |
| /* needed for transmitting the auth frame(s) properly */ |
| memcpy(sdata->vif.cfg.ap_addr, auth_data->ap_addr, ETH_ALEN); |
| |
| bss = (void *)req->bss->priv; |
| wmm_used = bss->wmm_used && (local->hw.queues >= IEEE80211_NUM_ACS); |
| |
| sband = local->hw.wiphy->bands[req->bss->channel->band]; |
| |
| ieee80211_determine_our_sta_mode_auth(sdata, sband, req, wmm_used, |
| &conn); |
| |
| err = ieee80211_prep_connection(sdata, req->bss, req->link_id, |
| req->ap_mld_addr, cont_auth, |
| &conn, false); |
| if (err) |
| goto err_clear; |
| |
| if (req->link_id >= 0) |
| link = sdata_dereference(sdata->link[req->link_id], sdata); |
| else |
| link = &sdata->deflink; |
| |
| if (WARN_ON(!link)) { |
| err = -ENOLINK; |
| goto err_clear; |
| } |
| |
| sdata_info(sdata, "authenticate with %pM (local address=%pM)\n", |
| auth_data->ap_addr, link->conf->addr); |
| |
| err = ieee80211_auth(sdata); |
| if (err) { |
| sta_info_destroy_addr(sdata, auth_data->ap_addr); |
| goto err_clear; |
| } |
| |
| /* hold our own reference */ |
| cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); |
| return 0; |
| |
| err_clear: |
| if (!ieee80211_vif_is_mld(&sdata->vif)) { |
| eth_zero_addr(sdata->deflink.u.mgd.bssid); |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, |
| BSS_CHANGED_BSSID); |
| ieee80211_link_release_channel(&sdata->deflink); |
| } |
| ifmgd->auth_data = NULL; |
| kfree(auth_data); |
| return err; |
| } |
| |
| static void |
| ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgd_assoc_data *assoc_data, |
| struct cfg80211_assoc_request *req, |
| struct ieee80211_conn_settings *conn, |
| unsigned int link_id) |
| { |
| struct ieee80211_local *local = sdata->local; |
| const struct cfg80211_bss_ies *bss_ies; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_link_data *link; |
| struct cfg80211_bss *cbss; |
| struct ieee80211_bss *bss; |
| |
| cbss = assoc_data->link[link_id].bss; |
| if (WARN_ON(!cbss)) |
| return; |
| |
| bss = (void *)cbss->priv; |
| |
| sband = local->hw.wiphy->bands[cbss->channel->band]; |
| if (WARN_ON(!sband)) |
| return; |
| |
| link = sdata_dereference(sdata->link[link_id], sdata); |
| if (WARN_ON(!link)) |
| return; |
| |
| /* for MLO connections assume advertising all rates is OK */ |
| if (!req->ap_mld_addr) { |
| assoc_data->supp_rates = bss->supp_rates; |
| assoc_data->supp_rates_len = bss->supp_rates_len; |
| } |
| |
| /* copy and link elems for the STA profile */ |
| if (req->links[link_id].elems_len) { |
| memcpy(assoc_data->ie_pos, req->links[link_id].elems, |
| req->links[link_id].elems_len); |
| assoc_data->link[link_id].elems = assoc_data->ie_pos; |
| assoc_data->link[link_id].elems_len = req->links[link_id].elems_len; |
| assoc_data->ie_pos += req->links[link_id].elems_len; |
| } |
| |
| link->u.mgd.beacon_crc_valid = false; |
| link->u.mgd.dtim_period = 0; |
| link->u.mgd.have_beacon = false; |
| |
| /* override HT configuration only if the AP and we support it */ |
| if (conn->mode >= IEEE80211_CONN_MODE_HT) { |
| struct ieee80211_sta_ht_cap sta_ht_cap; |
| |
| memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); |
| ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); |
| } |
| |
| rcu_read_lock(); |
| bss_ies = rcu_dereference(cbss->beacon_ies); |
| if (bss_ies) { |
| u8 dtim_count = 0; |
| |
| ieee80211_get_dtim(bss_ies, &dtim_count, |
| &link->u.mgd.dtim_period); |
| |
| sdata->deflink.u.mgd.have_beacon = true; |
| |
| if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { |
| link->conf->sync_tsf = bss_ies->tsf; |
| link->conf->sync_device_ts = bss->device_ts_beacon; |
| link->conf->sync_dtim_count = dtim_count; |
| } |
| } else { |
| bss_ies = rcu_dereference(cbss->ies); |
| } |
| |
| if (bss_ies) { |
| const struct element *elem; |
| |
| elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION, |
| bss_ies->data, bss_ies->len); |
| if (elem && elem->datalen >= 3) |
| link->conf->profile_periodicity = elem->data[2]; |
| else |
| link->conf->profile_periodicity = 0; |
| |
| elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, |
| bss_ies->data, bss_ies->len); |
| if (elem && elem->datalen >= 11 && |
| (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) |
| link->conf->ema_ap = true; |
| else |
| link->conf->ema_ap = false; |
| } |
| rcu_read_unlock(); |
| |
| if (bss->corrupt_data) { |
| char *corrupt_type = "data"; |
| |
| if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { |
| if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) |
| corrupt_type = "beacon and probe response"; |
| else |
| corrupt_type = "beacon"; |
| } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) { |
| corrupt_type = "probe response"; |
| } |
| sdata_info(sdata, "associating to AP %pM with corrupt %s\n", |
| cbss->bssid, corrupt_type); |
| } |
| |
| if (link->u.mgd.req_smps == IEEE80211_SMPS_AUTOMATIC) { |
| if (sdata->u.mgd.powersave) |
| link->smps_mode = IEEE80211_SMPS_DYNAMIC; |
| else |
| link->smps_mode = IEEE80211_SMPS_OFF; |
| } else { |
| link->smps_mode = link->u.mgd.req_smps; |
| } |
| } |
| |
| static int |
| ieee80211_mgd_get_ap_ht_vht_capa(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgd_assoc_data *assoc_data, |
| int link_id) |
| { |
| struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; |
| enum nl80211_band band = cbss->channel->band; |
| struct ieee80211_supported_band *sband; |
| const struct element *elem; |
| int err; |
| |
| /* neither HT nor VHT elements used on 6 GHz */ |
| if (band == NL80211_BAND_6GHZ) |
| return 0; |
| |
| if (assoc_data->link[link_id].conn.mode < IEEE80211_CONN_MODE_HT) |
| return 0; |
| |
| rcu_read_lock(); |
| elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION); |
| if (!elem || elem->datalen < sizeof(struct ieee80211_ht_operation)) { |
| mlme_link_id_dbg(sdata, link_id, "no HT operation on BSS %pM\n", |
| cbss->bssid); |
| err = -EINVAL; |
| goto out_rcu; |
| } |
| assoc_data->link[link_id].ap_ht_param = |
| ((struct ieee80211_ht_operation *)(elem->data))->ht_param; |
| rcu_read_unlock(); |
| |
| if (assoc_data->link[link_id].conn.mode < IEEE80211_CONN_MODE_VHT) |
| return 0; |
| |
| /* some drivers want to support VHT on 2.4 GHz even */ |
| sband = sdata->local->hw.wiphy->bands[band]; |
| if (!sband->vht_cap.vht_supported) |
| return 0; |
| |
| rcu_read_lock(); |
| elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); |
| /* but even then accept it not being present on the AP */ |
| if (!elem && band == NL80211_BAND_2GHZ) { |
| err = 0; |
| goto out_rcu; |
| } |
| if (!elem || elem->datalen < sizeof(struct ieee80211_vht_cap)) { |
| mlme_link_id_dbg(sdata, link_id, "no VHT capa on BSS %pM\n", |
| cbss->bssid); |
| err = -EINVAL; |
| goto out_rcu; |
| } |
| memcpy(&assoc_data->link[link_id].ap_vht_cap, elem->data, |
| sizeof(struct ieee80211_vht_cap)); |
| rcu_read_unlock(); |
| |
| return 0; |
| out_rcu: |
| rcu_read_unlock(); |
| return err; |
| } |
| |
| int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_assoc_request *req) |
| { |
| unsigned int assoc_link_id = req->link_id < 0 ? 0 : req->link_id; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data; |
| const struct element *ssid_elem; |
| struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; |
| struct ieee80211_link_data *link; |
| struct cfg80211_bss *cbss; |
| bool override, uapsd_supported; |
| bool match_auth; |
| int i, err; |
| size_t size = sizeof(*assoc_data) + req->ie_len; |
| |
| for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) |
| size += req->links[i].elems_len; |
| |
| /* FIXME: no support for 4-addr MLO yet */ |
| if (sdata->u.mgd.use_4addr && req->link_id >= 0) |
| return -EOPNOTSUPP; |
| |
| assoc_data = kzalloc(size, GFP_KERNEL); |
| if (!assoc_data) |
| return -ENOMEM; |
| |
| cbss = req->link_id < 0 ? req->bss : req->links[req->link_id].bss; |
| |
| if (ieee80211_mgd_csa_in_process(sdata, cbss)) { |
| sdata_info(sdata, "AP is in CSA process, reject assoc\n"); |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| rcu_read_lock(); |
| ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); |
| if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) { |
| rcu_read_unlock(); |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| memcpy(assoc_data->ssid, ssid_elem->data, ssid_elem->datalen); |
| assoc_data->ssid_len = ssid_elem->datalen; |
| rcu_read_unlock(); |
| |
| if (req->ap_mld_addr) |
| memcpy(assoc_data->ap_addr, req->ap_mld_addr, ETH_ALEN); |
| else |
| memcpy(assoc_data->ap_addr, cbss->bssid, ETH_ALEN); |
| |
| if (ifmgd->associated) { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_info(sdata, |
| "disconnect from AP %pM for new assoc to %pM\n", |
| sdata->vif.cfg.ap_addr, assoc_data->ap_addr); |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_UNSPECIFIED, |
| false, frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| WLAN_REASON_UNSPECIFIED, |
| false); |
| } |
| |
| memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); |
| memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, |
| sizeof(ifmgd->ht_capa_mask)); |
| |
| memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); |
| memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, |
| sizeof(ifmgd->vht_capa_mask)); |
| |
| memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa)); |
| memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask, |
| sizeof(ifmgd->s1g_capa_mask)); |
| |
| /* keep some setup (AP STA, channel, ...) if matching */ |
| match_auth = ifmgd->auth_data && |
| ether_addr_equal(ifmgd->auth_data->ap_addr, |
| assoc_data->ap_addr) && |
| ifmgd->auth_data->link_id == req->link_id; |
| |
| if (req->ap_mld_addr) { |
| uapsd_supported = true; |
| |
| for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) { |
| struct ieee80211_supported_band *sband; |
| struct cfg80211_bss *link_cbss = req->links[i].bss; |
| struct ieee80211_bss *bss; |
| |
| if (!link_cbss) |
| continue; |
| |
| bss = (void *)link_cbss->priv; |
| |
| if (!bss->wmm_used) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| if (req->flags & (ASSOC_REQ_DISABLE_HT | |
| ASSOC_REQ_DISABLE_VHT | |
| ASSOC_REQ_DISABLE_HE | |
| ASSOC_REQ_DISABLE_EHT)) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| if (link_cbss->channel->band == NL80211_BAND_S1GHZ) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| link = sdata_dereference(sdata->link[i], sdata); |
| if (link) |
| ether_addr_copy(assoc_data->link[i].addr, |
| link->conf->addr); |
| else |
| eth_random_addr(assoc_data->link[i].addr); |
| sband = local->hw.wiphy->bands[link_cbss->channel->band]; |
| |
| if (match_auth && i == assoc_link_id && link) |
| assoc_data->link[i].conn = link->u.mgd.conn; |
| else |
| assoc_data->link[i].conn = |
| ieee80211_conn_settings_unlimited; |
| ieee80211_determine_our_sta_mode_assoc(sdata, sband, |
| req, true, i, |
| &assoc_data->link[i].conn); |
| assoc_data->link[i].bss = link_cbss; |
| assoc_data->link[i].disabled = req->links[i].disabled; |
| |
| if (!bss->uapsd_supported) |
| uapsd_supported = false; |
| |
| if (assoc_data->link[i].conn.mode < IEEE80211_CONN_MODE_EHT) { |
| err = -EINVAL; |
| req->links[i].error = err; |
| goto err_free; |
| } |
| |
| err = ieee80211_mgd_get_ap_ht_vht_capa(sdata, |
| assoc_data, i); |
| if (err) { |
| err = -EINVAL; |
| req->links[i].error = err; |
| goto err_free; |
| } |
| } |
| |
| assoc_data->wmm = true; |
| } else { |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| |
| memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN); |
| assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ; |
| |
| assoc_data->wmm = bss->wmm_used && |
| (local->hw.queues >= IEEE80211_NUM_ACS); |
| |
| if (cbss->channel->band == NL80211_BAND_6GHZ && |
| req->flags & (ASSOC_REQ_DISABLE_HT | |
| ASSOC_REQ_DISABLE_VHT | |
| ASSOC_REQ_DISABLE_HE)) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| |
| sband = local->hw.wiphy->bands[cbss->channel->band]; |
| |
| assoc_data->link[0].bss = cbss; |
| |
| if (match_auth) |
| assoc_data->link[0].conn = sdata->deflink.u.mgd.conn; |
| else |
| assoc_data->link[0].conn = |
| ieee80211_conn_settings_unlimited; |
| ieee80211_determine_our_sta_mode_assoc(sdata, sband, req, |
| assoc_data->wmm, 0, |
| &assoc_data->link[0].conn); |
| |
| uapsd_supported = bss->uapsd_supported; |
| |
| err = ieee80211_mgd_get_ap_ht_vht_capa(sdata, assoc_data, 0); |
| if (err) |
| goto err_free; |
| } |
| |
| assoc_data->spp_amsdu = req->flags & ASSOC_REQ_SPP_AMSDU; |
| |
| if (ifmgd->auth_data && !ifmgd->auth_data->done) { |
| err = -EBUSY; |
| goto err_free; |
| } |
| |
| if (ifmgd->assoc_data) { |
| err = -EBUSY; |
| goto err_free; |
| } |
| |
| /* Cleanup is delayed if auth_data matches */ |
| if (ifmgd->auth_data && !match_auth) |
| ieee80211_destroy_auth_data(sdata, false); |
| |
| if (req->ie && req->ie_len) { |
| memcpy(assoc_data->ie, req->ie, req->ie_len); |
| assoc_data->ie_len = req->ie_len; |
| assoc_data->ie_pos = assoc_data->ie + assoc_data->ie_len; |
| } else { |
| assoc_data->ie_pos = assoc_data->ie; |
| } |
| |
| if (req->fils_kek) { |
| /* should already be checked in cfg80211 - so warn */ |
| if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| memcpy(assoc_data->fils_kek, req->fils_kek, |
| req->fils_kek_len); |
| assoc_data->fils_kek_len = req->fils_kek_len; |
| } |
| |
| if (req->fils_nonces) |
| memcpy(assoc_data->fils_nonces, req->fils_nonces, |
| 2 * FILS_NONCE_LEN); |
| |
| /* default timeout */ |
| assoc_data->timeout = jiffies; |
| assoc_data->timeout_started = true; |
| |
| assoc_data->assoc_link_id = assoc_link_id; |
| |
| if (req->ap_mld_addr) { |
| /* if there was no authentication, set up the link */ |
| err = ieee80211_vif_set_links(sdata, BIT(assoc_link_id), 0); |
| if (err) |
| goto err_clear; |
| } |
| |
| link = sdata_dereference(sdata->link[assoc_link_id], sdata); |
| if (WARN_ON(!link)) { |
| err = -EINVAL; |
| goto err_clear; |
| } |
| |
| override = link->u.mgd.conn.mode != |
| assoc_data->link[assoc_link_id].conn.mode || |
| link->u.mgd.conn.bw_limit != |
| assoc_data->link[assoc_link_id].conn.bw_limit; |
| link->u.mgd.conn = assoc_data->link[assoc_link_id].conn; |
| |
| ieee80211_setup_assoc_link(sdata, assoc_data, req, &link->u.mgd.conn, |
| assoc_link_id); |
| |
| if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && |
| ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), |
| "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) |
| sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; |
| |
| if (assoc_data->wmm && uapsd_supported && |
| (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { |
| assoc_data->uapsd = true; |
| ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; |
| } else { |
| assoc_data->uapsd = false; |
| ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; |
| } |
| |
| if (req->prev_bssid) |
| memcpy(assoc_data->prev_ap_addr, req->prev_bssid, ETH_ALEN); |
| |
| if (req->use_mfp) { |
| ifmgd->mfp = IEEE80211_MFP_REQUIRED; |
| ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; |
| } else { |
| ifmgd->mfp = IEEE80211_MFP_DISABLED; |
| ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; |
| } |
| |
| if (req->flags & ASSOC_REQ_USE_RRM) |
| ifmgd->flags |= IEEE80211_STA_ENABLE_RRM; |
| else |
| ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM; |
| |
| if (req->crypto.control_port) |
| ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; |
| else |
| ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; |
| |
| sdata->control_port_protocol = req->crypto.control_port_ethertype; |
| sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; |
| sdata->control_port_over_nl80211 = |
| req->crypto.control_port_over_nl80211; |
| sdata->control_port_no_preauth = req->crypto.control_port_no_preauth; |
| |
| /* kick off associate process */ |
| ifmgd->assoc_data = assoc_data; |
| |
| for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) { |
| if (!assoc_data->link[i].bss) |
| continue; |
| if (i == assoc_data->assoc_link_id) |
| continue; |
| /* only calculate the mode, hence link == NULL */ |
| err = ieee80211_prep_channel(sdata, NULL, i, |
| assoc_data->link[i].bss, true, |
| &assoc_data->link[i].conn); |
| if (err) { |
| req->links[i].error = err; |
| goto err_clear; |
| } |
| } |
| |
| memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len); |
| vif_cfg->ssid_len = assoc_data->ssid_len; |
| |
| /* needed for transmitting the assoc frames properly */ |
| memcpy(sdata->vif.cfg.ap_addr, assoc_data->ap_addr, ETH_ALEN); |
| |
| err = ieee80211_prep_connection(sdata, cbss, req->link_id, |
| req->ap_mld_addr, true, |
| &assoc_data->link[assoc_link_id].conn, |
| override); |
| if (err) |
| goto err_clear; |
| |
| if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC)) { |
| const struct cfg80211_bss_ies *beacon_ies; |
| |
| rcu_read_lock(); |
| beacon_ies = rcu_dereference(req->bss->beacon_ies); |
| if (!beacon_ies) { |
| /* |
| * Wait up to one beacon interval ... |
| * should this be more if we miss one? |
| */ |
| sdata_info(sdata, "waiting for beacon from %pM\n", |
| link->u.mgd.bssid); |
| assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); |
| assoc_data->timeout_started = true; |
| assoc_data->need_beacon = true; |
| } |
| rcu_read_unlock(); |
| } |
| |
| run_again(sdata, assoc_data->timeout); |
| |
| /* We are associating, clean up auth_data */ |
| if (ifmgd->auth_data) |
| ieee80211_destroy_auth_data(sdata, true); |
| |
| return 0; |
| err_clear: |
| if (!ifmgd->auth_data) { |
| eth_zero_addr(sdata->deflink.u.mgd.bssid); |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, |
| BSS_CHANGED_BSSID); |
| } |
| ifmgd->assoc_data = NULL; |
| err_free: |
| kfree(assoc_data); |
| return err; |
| } |
| |
| int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_deauth_request *req) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| bool tx = !req->local_state_change; |
| struct ieee80211_prep_tx_info info = { |
| .subtype = IEEE80211_STYPE_DEAUTH, |
| }; |
| |
| if (ifmgd->auth_data && |
| ether_addr_equal(ifmgd->auth_data->ap_addr, req->bssid)) { |
| sdata_info(sdata, |
| "aborting authentication with %pM by local choice (Reason: %u=%s)\n", |
| req->bssid, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| info.link_id = ifmgd->auth_data->link_id; |
| drv_mgd_prepare_tx(sdata->local, sdata, &info); |
| ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, |
| IEEE80211_STYPE_DEAUTH, |
| req->reason_code, tx, |
| frame_buf); |
| ieee80211_destroy_auth_data(sdata, false); |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| req->reason_code, false); |
| drv_mgd_complete_tx(sdata->local, sdata, &info); |
| return 0; |
| } |
| |
| if (ifmgd->assoc_data && |
| ether_addr_equal(ifmgd->assoc_data->ap_addr, req->bssid)) { |
| sdata_info(sdata, |
| "aborting association with %pM by local choice (Reason: %u=%s)\n", |
| req->bssid, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| info.link_id = ifmgd->assoc_data->assoc_link_id; |
| drv_mgd_prepare_tx(sdata->local, sdata, &info); |
| ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, |
| IEEE80211_STYPE_DEAUTH, |
| req->reason_code, tx, |
| frame_buf); |
| ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON); |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| req->reason_code, false); |
| drv_mgd_complete_tx(sdata->local, sdata, &info); |
| return 0; |
| } |
| |
| if (ifmgd->associated && |
| ether_addr_equal(sdata->vif.cfg.ap_addr, req->bssid)) { |
| sdata_info(sdata, |
| "deauthenticating from %pM by local choice (Reason: %u=%s)\n", |
| req->bssid, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| req->reason_code, tx, frame_buf); |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| req->reason_code, false); |
| drv_mgd_complete_tx(sdata->local, sdata, &info); |
| return 0; |
| } |
| |
| return -ENOTCONN; |
| } |
| |
| int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_disassoc_request *req) |
| { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| if (!sdata->u.mgd.associated || |
| memcmp(sdata->vif.cfg.ap_addr, req->ap_addr, ETH_ALEN)) |
| return -ENOTCONN; |
| |
| sdata_info(sdata, |
| "disassociating from %pM by local choice (Reason: %u=%s)\n", |
| req->ap_addr, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, |
| req->reason_code, !req->local_state_change, |
| frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, |
| req->reason_code, false); |
| |
| return 0; |
| } |
| |
| void ieee80211_mgd_stop_link(struct ieee80211_link_data *link) |
| { |
| wiphy_work_cancel(link->sdata->local->hw.wiphy, |
| &link->u.mgd.request_smps_work); |
| wiphy_work_cancel(link->sdata->local->hw.wiphy, |
| &link->u.mgd.recalc_smps); |
| wiphy_delayed_work_cancel(link->sdata->local->hw.wiphy, |
| &link->u.mgd.chswitch_work); |
| } |
| |
| void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| /* |
| * Make sure some work items will not run after this, |
| * they will not do anything but might not have been |
| * cancelled when disconnecting. |
| */ |
| wiphy_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->monitor_work); |
| wiphy_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->beacon_connection_loss_work); |
| wiphy_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->csa_connection_drop_work); |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->tdls_peer_del_work); |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->ml_reconf_work); |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, &ifmgd->ttlm_work); |
| wiphy_delayed_work_cancel(sdata->local->hw.wiphy, |
| &ifmgd->neg_ttlm_timeout_work); |
| |
| if (ifmgd->assoc_data) |
| ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); |
| if (ifmgd->auth_data) |
| ieee80211_destroy_auth_data(sdata, false); |
| spin_lock_bh(&ifmgd->teardown_lock); |
| if (ifmgd->teardown_skb) { |
| kfree_skb(ifmgd->teardown_skb); |
| ifmgd->teardown_skb = NULL; |
| ifmgd->orig_teardown_skb = NULL; |
| } |
| kfree(ifmgd->assoc_req_ies); |
| ifmgd->assoc_req_ies = NULL; |
| ifmgd->assoc_req_ies_len = 0; |
| spin_unlock_bh(&ifmgd->teardown_lock); |
| del_timer_sync(&ifmgd->timer); |
| } |
| |
| void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, |
| enum nl80211_cqm_rssi_threshold_event rssi_event, |
| s32 rssi_level, |
| gfp_t gfp) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level); |
| |
| cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp); |
| } |
| EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); |
| |
| void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| trace_api_cqm_beacon_loss_notify(sdata->local, sdata); |
| |
| cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp); |
| } |
| EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify); |
| |
| static void _ieee80211_enable_rssi_reports(struct ieee80211_sub_if_data *sdata, |
| int rssi_min_thold, |
| int rssi_max_thold) |
| { |
| trace_api_enable_rssi_reports(sdata, rssi_min_thold, rssi_max_thold); |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) |
| return; |
| |
| /* |
| * Scale up threshold values before storing it, as the RSSI averaging |
| * algorithm uses a scaled up value as well. Change this scaling |
| * factor if the RSSI averaging algorithm changes. |
| */ |
| sdata->u.mgd.rssi_min_thold = rssi_min_thold*16; |
| sdata->u.mgd.rssi_max_thold = rssi_max_thold*16; |
| } |
| |
| void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, |
| int rssi_min_thold, |
| int rssi_max_thold) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| WARN_ON(rssi_min_thold == rssi_max_thold || |
| rssi_min_thold > rssi_max_thold); |
| |
| _ieee80211_enable_rssi_reports(sdata, rssi_min_thold, |
| rssi_max_thold); |
| } |
| EXPORT_SYMBOL(ieee80211_enable_rssi_reports); |
| |
| void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| _ieee80211_enable_rssi_reports(sdata, 0, 0); |
| } |
| EXPORT_SYMBOL(ieee80211_disable_rssi_reports); |