)]}'
{
  "commit": "0ebb962e00a52b644433065d224ed89f72a84756",
  "tree": "349a518542f801d0e34a1afd3faddb4294e89b61",
  "parents": [
    "0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c"
  ],
  "author": {
    "name": "Nick Bowler",
    "email": "nbowler@elliptictech.com",
    "time": "Wed Jul 20 15:43:42 2011 +0100"
  },
  "committer": {
    "name": "Russell King",
    "email": "rmk+kernel@arm.linux.org.uk",
    "time": "Wed Aug 24 09:45:21 2011 +0100"
  },
  "message": "ARM: 7003/1: vexpress: Add clock definition for the SP805.\n\nIt seems that an entry for the SP805 watchdog in the table of clocks was\nmissing.  This results in the sp805_wdt driver rejecting the device with\nthe following errors:\n\n  sp805-wdt mb:wdt: Clock not found\n  sp805-wdt mb:wdt: Probe Failed!!!\n  sp805-wdt: probe of mb:wdt failed with error -2\n\nWhile not obviously stated in the hardware docs, the onboard SP810\u0027s\n\"REFCLK\" is connected to a 32.768KHz crystal, and this drives the\nwatchdog.  Add a struct clk and corresponding lookup entry for it.\n\nSigned-off-by: Nick Bowler \u003cnbowler@elliptictech.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "9e6b93b1a04342e7883aa241ddecb02856818a0e",
      "old_mode": 33188,
      "old_path": "arch/arm/mach-vexpress/v2m.c",
      "new_id": "d0d267a8d3f927dc0af84ebbccde640fa46ebafa",
      "new_mode": 33188,
      "new_path": "arch/arm/mach-vexpress/v2m.c"
    }
  ]
}