drivers/net/wan/hdlc_x25.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Generic HDLC support routines for Linux
  * X.25 support
  *
  * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl>
  */

 #include <linux/errno.h>
 #include <linux/gfp.h>
 #include <linux/hdlc.h>
 #include <linux/if_arp.h>
 #include <linux/inetdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/lapb.h>
 #include <linux/module.h>
 #include <linux/pkt_sched.h>
 #include <linux/poll.h>
 #include <linux/rtnetlink.h>
 #include <linux/skbuff.h>
 #include <net/x25device.h>

 struct x25_state {
 	x25_hdlc_proto settings;
 	bool up;
 	spinlock_t up_lock; /* Protects "up" */
 };

 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);

 static struct x25_state *state(hdlc_device *hdlc)
 {
 	return hdlc->state;
 }

 /* These functions are callbacks called by LAPB layer */

 static void x25_connect_disconnect(struct net_device *dev, int reason, int code)
 {
 	struct sk_buff *skb;
 	unsigned char *ptr;

 	if ((skb = dev_alloc_skb(1)) == NULL) {
 		netdev_err(dev, "out of memory\n");
 		return;
 	}

 	ptr = skb_put(skb, 1);
 	*ptr = code;

 	skb->protocol = x25_type_trans(skb, dev);
 	netif_rx(skb);
 }


 static void x25_connected(struct net_device *dev, int reason)
 {
 	x25_connect_disconnect(dev, reason, X25_IFACE_CONNECT);
 }


 static void x25_disconnected(struct net_device *dev, int reason)
 {
 	x25_connect_disconnect(dev, reason, X25_IFACE_DISCONNECT);
 }


 static int x25_data_indication(struct net_device *dev, struct sk_buff *skb)
 {
 	unsigned char *ptr;

 	if (skb_cow(skb, 1)) {
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}

 	skb_push(skb, 1);
 	skb_reset_network_header(skb);

 	ptr  = skb->data;
 	*ptr = X25_IFACE_DATA;

 	skb->protocol = x25_type_trans(skb, dev);
 	return netif_rx(skb);
 }


 static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);

 	skb_reset_network_header(skb);
 	skb->protocol = hdlc_type_trans(skb, dev);

 	if (dev_nit_active(dev))
 		dev_queue_xmit_nit(skb, dev);

 	hdlc->xmit(skb, dev); /* Ignore return value :-( */
 }


 static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	struct x25_state *x25st = state(hdlc);
 	int result;

 	/* There should be a pseudo header of 1 byte added by upper layers.
 	 * Check to make sure it is there before reading it.
 	 */
 	if (skb->len < 1) {
 		kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}

 	spin_lock_bh(&x25st->up_lock);
 	if (!x25st->up) {
 		spin_unlock_bh(&x25st->up_lock);
 		kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}

 	switch (skb->data[0]) {
 	case X25_IFACE_DATA:	/* Data to be transmitted */
 		skb_pull(skb, 1);
 		skb_reset_network_header(skb);
 		if ((result = lapb_data_request(dev, skb)) != LAPB_OK)
 			dev_kfree_skb(skb);
 		spin_unlock_bh(&x25st->up_lock);
 		return NETDEV_TX_OK;

 	case X25_IFACE_CONNECT:
 		if ((result = lapb_connect_request(dev))!= LAPB_OK) {
 			if (result == LAPB_CONNECTED)
 				/* Send connect confirm. msg to level 3 */
 				x25_connected(dev, 0);
 			else
 				netdev_err(dev, "LAPB connect request failed, error code = %i\n",
 					   result);
 		}
 		break;

 	case X25_IFACE_DISCONNECT:
 		if ((result = lapb_disconnect_request(dev)) != LAPB_OK) {
 			if (result == LAPB_NOTCONNECTED)
 				/* Send disconnect confirm. msg to level 3 */
 				x25_disconnected(dev, 0);
 			else
 				netdev_err(dev, "LAPB disconnect request failed, error code = %i\n",
 					   result);
 		}
 		break;

 	default:		/* to be defined */
 		break;
 	}

 	spin_unlock_bh(&x25st->up_lock);
 	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }


 static int x25_open(struct net_device *dev)
 {
 	static const struct lapb_register_struct cb = {
 		.connect_confirmation = x25_connected,
 		.connect_indication = x25_connected,
 		.disconnect_confirmation = x25_disconnected,
 		.disconnect_indication = x25_disconnected,
 		.data_indication = x25_data_indication,
 		.data_transmit = x25_data_transmit,
 	};
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	struct x25_state *x25st = state(hdlc);
 	struct lapb_parms_struct params;
 	int result;

 	result = lapb_register(dev, &cb);
 	if (result != LAPB_OK)
 		return -ENOMEM;

 	result = lapb_getparms(dev, &params);
 	if (result != LAPB_OK)
 		return -EINVAL;

 	if (state(hdlc)->settings.dce)
 		params.mode = params.mode | LAPB_DCE;

 	if (state(hdlc)->settings.modulo == 128)
 		params.mode = params.mode | LAPB_EXTENDED;

 	params.window = state(hdlc)->settings.window;
 	params.t1 = state(hdlc)->settings.t1;
 	params.t2 = state(hdlc)->settings.t2;
 	params.n2 = state(hdlc)->settings.n2;

 	result = lapb_setparms(dev, &params);
 	if (result != LAPB_OK)
 		return -EINVAL;

 	spin_lock_bh(&x25st->up_lock);
 	x25st->up = true;
 	spin_unlock_bh(&x25st->up_lock);

 	return 0;
 }


 static void x25_close(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	struct x25_state *x25st = state(hdlc);

 	spin_lock_bh(&x25st->up_lock);
 	x25st->up = false;
 	spin_unlock_bh(&x25st->up_lock);

 	lapb_unregister(dev);
 }


 static int x25_rx(struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	struct x25_state *x25st = state(hdlc);

 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
 		dev->stats.rx_dropped++;
 		return NET_RX_DROP;
 	}

 	spin_lock_bh(&x25st->up_lock);
 	if (!x25st->up) {
 		spin_unlock_bh(&x25st->up_lock);
 		kfree_skb(skb);
 		dev->stats.rx_dropped++;
 		return NET_RX_DROP;
 	}

 	if (lapb_data_received(dev, skb) == LAPB_OK) {
 		spin_unlock_bh(&x25st->up_lock);
 		return NET_RX_SUCCESS;
 	}

 	spin_unlock_bh(&x25st->up_lock);
 	dev->stats.rx_errors++;
 	dev_kfree_skb_any(skb);
 	return NET_RX_DROP;
 }


 static struct hdlc_proto proto = {
 	.open		= x25_open,
 	.close		= x25_close,
 	.ioctl		= x25_ioctl,
 	.netif_rx	= x25_rx,
 	.xmit		= x25_xmit,
 	.module		= THIS_MODULE,
 };


 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 {
 	x25_hdlc_proto __user *x25_s = ifr->ifr_settings.ifs_ifsu.x25;
 	const size_t size = sizeof(x25_hdlc_proto);
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	x25_hdlc_proto new_settings;
 	int result;

 	switch (ifr->ifr_settings.type) {
 	case IF_GET_PROTO:
 		if (dev_to_hdlc(dev)->proto != &proto)
 			return -EINVAL;
 		ifr->ifr_settings.type = IF_PROTO_X25;
 		if (ifr->ifr_settings.size < size) {
 			ifr->ifr_settings.size = size; /* data size wanted */
 			return -ENOBUFS;
 		}
 		if (copy_to_user(x25_s, &state(hdlc)->settings, size))
 			return -EFAULT;
 		return 0;

 	case IF_PROTO_X25:
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;

 		if (dev->flags & IFF_UP)
 			return -EBUSY;

 		/* backward compatibility */
 		if (ifr->ifr_settings.size == 0) {
 			new_settings.dce = 0;
 			new_settings.modulo = 8;
 			new_settings.window = 7;
 			new_settings.t1 = 3;
 			new_settings.t2 = 1;
 			new_settings.n2 = 10;
 		}
 		else {
 			if (copy_from_user(&new_settings, x25_s, size))
 				return -EFAULT;

 			if ((new_settings.dce != 0 &&
 			new_settings.dce != 1) ||
 			(new_settings.modulo != 8 &&
 			new_settings.modulo != 128) ||
 			new_settings.window < 1 ||
 			(new_settings.modulo == 8 &&
 			new_settings.window > 7) ||
 			(new_settings.modulo == 128 &&
 			new_settings.window > 127) ||
 			new_settings.t1 < 1 ||
 			new_settings.t1 > 255 ||
 			new_settings.t2 < 1 ||
 			new_settings.t2 > 255 ||
 			new_settings.n2 < 1 ||
 			new_settings.n2 > 255)
 				return -EINVAL;
 		}

 		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
 		if (result)
 			return result;

 		if ((result = attach_hdlc_protocol(dev, &proto,
 						   sizeof(struct x25_state))))
 			return result;

 		memcpy(&state(hdlc)->settings, &new_settings, size);
 		state(hdlc)->up = false;
 		spin_lock_init(&state(hdlc)->up_lock);

 		/* There's no header_ops so hard_header_len should be 0. */
 		dev->hard_header_len = 0;
 		/* When transmitting data:
 		 * first we'll remove a pseudo header of 1 byte,
 		 * then we'll prepend an LAPB header of at most 3 bytes.
 		 */
 		dev->needed_headroom = 3 - 1;

 		dev->type = ARPHRD_X25;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_off(dev);
 		return 0;
 	}

 	return -EINVAL;
 }


 static int __init mod_init(void)
 {
 	register_hdlc_protocol(&proto);
 	return 0;
 }


 static void __exit mod_exit(void)
 {
 	unregister_hdlc_protocol(&proto);
 }


 module_init(mod_init);
 module_exit(mod_exit);

 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
 MODULE_DESCRIPTION("X.25 protocol support for generic HDLC");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Generic HDLC support routines for Linux
	* X.25 support
	*
	* Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl>
	*/

	#include <linux/errno.h>
	#include <linux/gfp.h>
	#include <linux/hdlc.h>
	#include <linux/if_arp.h>
	#include <linux/inetdevice.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/lapb.h>
	#include <linux/module.h>
	#include <linux/pkt_sched.h>
	#include <linux/poll.h>
	#include <linux/rtnetlink.h>
	#include <linux/skbuff.h>
	#include <net/x25device.h>

	struct x25_state {
	x25_hdlc_proto settings;
	bool up;
	spinlock_t up_lock; /* Protects "up" */
	};

	static int x25_ioctl(struct net_device dev, struct ifreq ifr);

	static struct x25_state state(hdlc_device hdlc)
	{
	return hdlc->state;
	}

	/* These functions are callbacks called by LAPB layer */

	static void x25_connect_disconnect(struct net_device *dev, int reason, int code)
	{
	struct sk_buff *skb;
	unsigned char *ptr;

	if ((skb = dev_alloc_skb(1)) == NULL) {
	netdev_err(dev, "out of memory\n");
	return;
	}

	ptr = skb_put(skb, 1);
	*ptr = code;

	skb->protocol = x25_type_trans(skb, dev);
	netif_rx(skb);
	}



	static void x25_connected(struct net_device *dev, int reason)
	{
	x25_connect_disconnect(dev, reason, X25_IFACE_CONNECT);
	}



	static void x25_disconnected(struct net_device *dev, int reason)
	{
	x25_connect_disconnect(dev, reason, X25_IFACE_DISCONNECT);
	}



	static int x25_data_indication(struct net_device dev, struct sk_buff skb)
	{
	unsigned char *ptr;

	if (skb_cow(skb, 1)) {
	kfree_skb(skb);
	return NET_RX_DROP;
	}

	skb_push(skb, 1);
	skb_reset_network_header(skb);

	ptr = skb->data;
	*ptr = X25_IFACE_DATA;

	skb->protocol = x25_type_trans(skb, dev);
	return netif_rx(skb);
	}



	static void x25_data_transmit(struct net_device dev, struct sk_buff skb)
	{
	hdlc_device *hdlc = dev_to_hdlc(dev);

	skb_reset_network_header(skb);
	skb->protocol = hdlc_type_trans(skb, dev);

	if (dev_nit_active(dev))
	dev_queue_xmit_nit(skb, dev);

	hdlc->xmit(skb, dev); /* Ignore return value :-( */
	}



	static netdev_tx_t x25_xmit(struct sk_buff skb, struct net_device dev)
	{
	hdlc_device *hdlc = dev_to_hdlc(dev);
	struct x25_state *x25st = state(hdlc);
	int result;

	/* There should be a pseudo header of 1 byte added by upper layers.
	* Check to make sure it is there before reading it.
	*/
	if (skb->len < 1) {
	kfree_skb(skb);
	return NETDEV_TX_OK;
	}

	spin_lock_bh(&x25st->up_lock);
	if (!x25st->up) {
	spin_unlock_bh(&x25st->up_lock);
	kfree_skb(skb);
	return NETDEV_TX_OK;
	}

	switch (skb->data[0]) {
	case X25_IFACE_DATA: /* Data to be transmitted */
	skb_pull(skb, 1);
	skb_reset_network_header(skb);
	if ((result = lapb_data_request(dev, skb)) != LAPB_OK)
	dev_kfree_skb(skb);
	spin_unlock_bh(&x25st->up_lock);
	return NETDEV_TX_OK;

	case X25_IFACE_CONNECT:
	if ((result = lapb_connect_request(dev))!= LAPB_OK) {
	if (result == LAPB_CONNECTED)
	/* Send connect confirm. msg to level 3 */
	x25_connected(dev, 0);
	else
	netdev_err(dev, "LAPB connect request failed, error code = %i\n",
	result);
	}
	break;

	case X25_IFACE_DISCONNECT:
	if ((result = lapb_disconnect_request(dev)) != LAPB_OK) {
	if (result == LAPB_NOTCONNECTED)
	/* Send disconnect confirm. msg to level 3 */
	x25_disconnected(dev, 0);
	else
	netdev_err(dev, "LAPB disconnect request failed, error code = %i\n",
	result);
	}
	break;

	default: /* to be defined */
	break;
	}

	spin_unlock_bh(&x25st->up_lock);
	dev_kfree_skb(skb);
	return NETDEV_TX_OK;
	}



	static int x25_open(struct net_device *dev)
	{
	static const struct lapb_register_struct cb = {
	.connect_confirmation = x25_connected,
	.connect_indication = x25_connected,
	.disconnect_confirmation = x25_disconnected,
	.disconnect_indication = x25_disconnected,
	.data_indication = x25_data_indication,
	.data_transmit = x25_data_transmit,
	};
	hdlc_device *hdlc = dev_to_hdlc(dev);
	struct x25_state *x25st = state(hdlc);
	struct lapb_parms_struct params;
	int result;

	result = lapb_register(dev, &cb);
	if (result != LAPB_OK)
	return -ENOMEM;

	result = lapb_getparms(dev, &params);
	if (result != LAPB_OK)
	return -EINVAL;

	if (state(hdlc)->settings.dce)
	params.mode = params.mode \| LAPB_DCE;

	if (state(hdlc)->settings.modulo == 128)
	params.mode = params.mode \| LAPB_EXTENDED;

	params.window = state(hdlc)->settings.window;
	params.t1 = state(hdlc)->settings.t1;
	params.t2 = state(hdlc)->settings.t2;
	params.n2 = state(hdlc)->settings.n2;

	result = lapb_setparms(dev, &params);
	if (result != LAPB_OK)
	return -EINVAL;

	spin_lock_bh(&x25st->up_lock);
	x25st->up = true;
	spin_unlock_bh(&x25st->up_lock);

	return 0;
	}



	static void x25_close(struct net_device *dev)
	{
	hdlc_device *hdlc = dev_to_hdlc(dev);
	struct x25_state *x25st = state(hdlc);

	spin_lock_bh(&x25st->up_lock);
	x25st->up = false;
	spin_unlock_bh(&x25st->up_lock);

	lapb_unregister(dev);
	}



	static int x25_rx(struct sk_buff *skb)
	{
	struct net_device *dev = skb->dev;
	hdlc_device *hdlc = dev_to_hdlc(dev);
	struct x25_state *x25st = state(hdlc);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
	dev->stats.rx_dropped++;
	return NET_RX_DROP;
	}

	spin_lock_bh(&x25st->up_lock);
	if (!x25st->up) {
	spin_unlock_bh(&x25st->up_lock);
	kfree_skb(skb);
	dev->stats.rx_dropped++;
	return NET_RX_DROP;
	}

	if (lapb_data_received(dev, skb) == LAPB_OK) {
	spin_unlock_bh(&x25st->up_lock);
	return NET_RX_SUCCESS;
	}

	spin_unlock_bh(&x25st->up_lock);
	dev->stats.rx_errors++;
	dev_kfree_skb_any(skb);
	return NET_RX_DROP;
	}


	static struct hdlc_proto proto = {
	.open = x25_open,
	.close = x25_close,
	.ioctl = x25_ioctl,
	.netif_rx = x25_rx,
	.xmit = x25_xmit,
	.module = THIS_MODULE,
	};


	static int x25_ioctl(struct net_device dev, struct ifreq ifr)
	{
	x25_hdlc_proto __user *x25_s = ifr->ifr_settings.ifs_ifsu.x25;
	const size_t size = sizeof(x25_hdlc_proto);
	hdlc_device *hdlc = dev_to_hdlc(dev);
	x25_hdlc_proto new_settings;
	int result;

	switch (ifr->ifr_settings.type) {
	case IF_GET_PROTO:
	if (dev_to_hdlc(dev)->proto != &proto)
	return -EINVAL;
	ifr->ifr_settings.type = IF_PROTO_X25;
	if (ifr->ifr_settings.size < size) {
	ifr->ifr_settings.size = size; /* data size wanted */
	return -ENOBUFS;
	}
	if (copy_to_user(x25_s, &state(hdlc)->settings, size))
	return -EFAULT;
	return 0;

	case IF_PROTO_X25:
	if (!capable(CAP_NET_ADMIN))
	return -EPERM;

	if (dev->flags & IFF_UP)
	return -EBUSY;

	/* backward compatibility */
	if (ifr->ifr_settings.size == 0) {
	new_settings.dce = 0;
	new_settings.modulo = 8;
	new_settings.window = 7;
	new_settings.t1 = 3;
	new_settings.t2 = 1;
	new_settings.n2 = 10;
	}
	else {
	if (copy_from_user(&new_settings, x25_s, size))
	return -EFAULT;

	if ((new_settings.dce != 0 &&
	new_settings.dce != 1) \|\|
	(new_settings.modulo != 8 &&
	new_settings.modulo != 128) \|\|
	new_settings.window < 1 \|\|
	(new_settings.modulo == 8 &&
	new_settings.window > 7) \|\|
	(new_settings.modulo == 128 &&
	new_settings.window > 127) \|\|
	new_settings.t1 < 1 \|\|
	new_settings.t1 > 255 \|\|
	new_settings.t2 < 1 \|\|
	new_settings.t2 > 255 \|\|
	new_settings.n2 < 1 \|\|
	new_settings.n2 > 255)
	return -EINVAL;
	}

	result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
	if (result)
	return result;

	if ((result = attach_hdlc_protocol(dev, &proto,
	sizeof(struct x25_state))))
	return result;

	memcpy(&state(hdlc)->settings, &new_settings, size);
	state(hdlc)->up = false;
	spin_lock_init(&state(hdlc)->up_lock);

	/* There's no header_ops so hard_header_len should be 0. */
	dev->hard_header_len = 0;
	/* When transmitting data:
	* first we'll remove a pseudo header of 1 byte,
	* then we'll prepend an LAPB header of at most 3 bytes.
	*/
	dev->needed_headroom = 3 - 1;

	dev->type = ARPHRD_X25;
	call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
	netif_dormant_off(dev);
	return 0;
	}

	return -EINVAL;
	}


	static int __init mod_init(void)
	{
	register_hdlc_protocol(&proto);
	return 0;
	}



	static void __exit mod_exit(void)
	{
	unregister_hdlc_protocol(&proto);
	}


	module_init(mod_init);
	module_exit(mod_exit);

	MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
	MODULE_DESCRIPTION("X.25 protocol support for generic HDLC");
	MODULE_LICENSE("GPL v2");