# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SPMI Controller (PMIC Arbiter)

maintainers:
  - Stephen Boyd <sboyd@kernel.org>

description: |
  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
  controller with wrapping arbitration logic to allow for multiple on-chip
  devices to control a single SPMI master.

  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
  to slave devices.

allOf:
  - $ref: spmi.yaml

properties:
  compatible:
    const: qcom,spmi-pmic-arb

  reg:
    oneOf:
      - items: # V1
          - description: core registers
          - description: interrupt controller registers
          - description: configuration registers
      - items: # V2
          - description: core registers
          - description: tx-channel per virtual slave regosters
          - description: rx-channel (called observer) per virtual slave registers
          - description: interrupt controller registers
          - description: configuration registers

  reg-names:
    oneOf:
      - items:
          - const: core
          - const: intr
          - const: cnfg
      - items:
          - const: core
          - const: chnls
          - const: obsrvr
          - const: intr
          - const: cnfg

  interrupts:
    maxItems: 1

  interrupt-names:
    const: periph_irq

  interrupt-controller: true

  '#address-cells': true

  '#interrupt-cells':
    const: 4
    description: |
      cell 1: slave ID for the requested interrupt (0-15)
      cell 2: peripheral ID for requested interrupt (0-255)
      cell 3: the requested peripheral interrupt (0-7)
      cell 4: interrupt flags indicating level-sense information,
              as defined in dt-bindings/interrupt-controller/irq.h

  '#size-cells': true

  qcom,ee:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 5
    description: >
      indicates the active Execution Environment identifier

  qcom,channel:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 5
    description: >
      which of the PMIC Arb provided channels to use for accesses

required:
  - compatible
  - reg-names
  - qcom,ee
  - qcom,channel

unevaluatedProperties: false

examples:
  - |
    spmi@fc4cf000 {
        compatible = "qcom,spmi-pmic-arb";
        reg-names = "core", "intr", "cnfg";
        reg = <0xfc4cf000 0x1000>,
              <0xfc4cb000 0x1000>,
              <0xfc4ca000 0x1000>;

        interrupt-names = "periph_irq";
        interrupts = <0 190 0>;

        qcom,ee = <0>;
        qcom,channel = <0>;

        #address-cells = <2>;
        #size-cells = <0>;

        interrupt-controller;
        #interrupt-cells = <4>;
    };