// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Falcon CSI/DSI sub-board
 *
 * Copyright (C) 2021 Glider bv
 */

&csi40 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			csi40_in: endpoint {
				clock-lanes = <0>;
				data-lanes = <1 2 3 4>;
				remote-endpoint = <&max96712_out0>;
			};
		};
	};
};

&csi42 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			csi42_in: endpoint {
				clock-lanes = <0>;
				data-lanes = <1 2 3 4>;
				remote-endpoint = <&max96712_out1>;
			};
		};
	};
};

&csi43 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			csi43_in: endpoint {
				clock-lanes = <0>;
				data-lanes = <1 2 3 4>;
				remote-endpoint = <&max96712_out2>;
			};
		};
	};
};

&i2c0 {
	pca9654_a: gpio@21 {
		compatible = "onnn,pca9654";
		reg = <0x21>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	pca9654_b: gpio@22 {
		compatible = "onnn,pca9654";
		reg = <0x22>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	pca9654_c: gpio@23 {
		compatible = "onnn,pca9654";
		reg = <0x23>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	eeprom@52 {
		compatible = "rohm,br24g01", "atmel,24c01";
		label = "csi-dsi-sub-board-id";
		reg = <0x52>;
		pagesize = <8>;
	};
};

&i2c1 {
	gmsl0: gmsl-deserializer@49 {
		compatible = "maxim,max96712";
		reg = <0x49>;
		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@4 {
				reg = <4>;
				max96712_out0: endpoint {
					clock-lanes = <0>;
					data-lanes = <1 2 3 4>;
					remote-endpoint = <&csi40_in>;
				};
			};
		};
	};

	gmsl1: gmsl-deserializer@4b {
		compatible = "maxim,max96712";
		reg = <0x4b>;
		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@4 {
				reg = <4>;
				max96712_out1: endpoint {
					clock-lanes = <0>;
					data-lanes = <1 2 3 4>;
					lane-polarities = <0 0 0 0 1>;
					remote-endpoint = <&csi42_in>;
				};
			};
		};
	};

	gmsl2: gmsl-deserializer@6b {
		compatible = "maxim,max96712";
		reg = <0x6b>;
		enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@4 {
				reg = <4>;
				max96712_out2: endpoint {
					clock-lanes = <0>;
					data-lanes = <1 2 3 4>;
					lane-polarities = <0 0 0 0 1>;
					remote-endpoint = <&csi43_in>;
				};
			};
		};
	};
};

&isp0 {
	status = "okay";
};

&isp2 {
	status = "okay";
};

&isp3 {
	status = "okay";
};

&vin00 {
	status = "okay";
};

&vin01 {
	status = "okay";
};

&vin02 {
	status = "okay";
};

&vin03 {
	status = "okay";
};

&vin04 {
	status = "okay";
};

&vin05 {
	status = "okay";
};

&vin06 {
	status = "okay";
};

&vin07 {
	status = "okay";
};

&vin16 {
	status = "okay";
};

&vin17 {
	status = "okay";
};

&vin18 {
	status = "okay";
};

&vin19 {
	status = "okay";
};

&vin20 {
	status = "okay";
};

&vin21 {
	status = "okay";
};

&vin22 {
	status = "okay";
};

&vin23 {
	status = "okay";
};

&vin24 {
	status = "okay";
};

&vin25 {
	status = "okay";
};

&vin26 {
	status = "okay";
};

&vin27 {
	status = "okay";
};

&vin28 {
	status = "okay";
};

&vin29 {
	status = "okay";
};

&vin30 {
	status = "okay";
};

&vin31 {
	status = "okay";
};