EDAC: Add EDAC driver for DMC520
The driver supports error detection and correction on devices with an
ARM DMC-520 memory controller.
Signed-off-by: Lei Wang <leiwang_git@outlook.com>
Signed-off-by: Shiping Ji <shiping.linux@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lkml.kernel.org/r/83b48c70-dc06-d0d4-cae9-a2187fca628b@gmail.com
diff --git a/MAINTAINERS b/MAINTAINERS
index a0d8649..8456c8e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5998,6 +5998,12 @@
F: drivers/edac/
F: include/linux/edac.h
+EDAC-DMC520
+M: Lei Wang <lewan@microsoft.com>
+L: linux-edac@vger.kernel.org
+S: Supported
+F: drivers/edac/dmc520_edac.c
+
EDAC-E752X
M: Mark Gross <mark.gross@intel.com>
L: linux-edac@vger.kernel.org
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index b3c99bb..fe2eb89 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -523,4 +523,11 @@
Support for error detection and correction on the
Mellanox BlueField SoCs.
+config EDAC_DMC520
+ tristate "ARM DMC-520 ECC"
+ depends on ARM64
+ help
+ Support for error detection and correction on the
+ SoCs with ARM DMC-520 DRAM controller.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index d77200c..269e151 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -87,3 +87,4 @@
obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o
obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o
obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o
+obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o
diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac/dmc520_edac.c
new file mode 100644
index 0000000..fc1153a
--- /dev/null
+++ b/drivers/edac/dmc520_edac.c
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * EDAC driver for DMC-520 memory controller.
+ *
+ * The driver supports 10 interrupt lines,
+ * though only dram_ecc_errc and dram_ecc_errd are currently handled.
+ *
+ * Authors: Rui Zhao <ruizhao@microsoft.com>
+ * Lei Wang <lewan@microsoft.com>
+ * Shiping Ji <shji@microsoft.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "edac_mc.h"
+
+/* DMC-520 registers */
+#define REG_OFFSET_FEATURE_CONFIG 0x130
+#define REG_OFFSET_ECC_ERRC_COUNT_31_00 0x158
+#define REG_OFFSET_ECC_ERRC_COUNT_63_32 0x15C
+#define REG_OFFSET_ECC_ERRD_COUNT_31_00 0x160
+#define REG_OFFSET_ECC_ERRD_COUNT_63_32 0x164
+#define REG_OFFSET_INTERRUPT_CONTROL 0x500
+#define REG_OFFSET_INTERRUPT_CLR 0x508
+#define REG_OFFSET_INTERRUPT_STATUS 0x510
+#define REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_31_00 0x528
+#define REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_63_32 0x52C
+#define REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_31_00 0x530
+#define REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_63_32 0x534
+#define REG_OFFSET_ADDRESS_CONTROL_NOW 0x1010
+#define REG_OFFSET_MEMORY_TYPE_NOW 0x1128
+#define REG_OFFSET_SCRUB_CONTROL0_NOW 0x1170
+#define REG_OFFSET_FORMAT_CONTROL 0x18
+
+/* DMC-520 types, masks and bitfields */
+#define RAM_ECC_INT_CE_BIT BIT(0)
+#define RAM_ECC_INT_UE_BIT BIT(1)
+#define DRAM_ECC_INT_CE_BIT BIT(2)
+#define DRAM_ECC_INT_UE_BIT BIT(3)
+#define FAILED_ACCESS_INT_BIT BIT(4)
+#define FAILED_PROG_INT_BIT BIT(5)
+#define LINK_ERR_INT_BIT BIT(6)
+#define TEMPERATURE_EVENT_INT_BIT BIT(7)
+#define ARCH_FSM_INT_BIT BIT(8)
+#define PHY_REQUEST_INT_BIT BIT(9)
+#define MEMORY_WIDTH_MASK GENMASK(1, 0)
+#define SCRUB_TRIGGER0_NEXT_MASK GENMASK(1, 0)
+#define REG_FIELD_DRAM_ECC_ENABLED GENMASK(1, 0)
+#define REG_FIELD_MEMORY_TYPE GENMASK(2, 0)
+#define REG_FIELD_DEVICE_WIDTH GENMASK(9, 8)
+#define REG_FIELD_ADDRESS_CONTROL_COL GENMASK(2, 0)
+#define REG_FIELD_ADDRESS_CONTROL_ROW GENMASK(10, 8)
+#define REG_FIELD_ADDRESS_CONTROL_BANK GENMASK(18, 16)
+#define REG_FIELD_ADDRESS_CONTROL_RANK GENMASK(25, 24)
+#define REG_FIELD_ERR_INFO_LOW_VALID BIT(0)
+#define REG_FIELD_ERR_INFO_LOW_COL GENMASK(10, 1)
+#define REG_FIELD_ERR_INFO_LOW_ROW GENMASK(28, 11)
+#define REG_FIELD_ERR_INFO_LOW_RANK GENMASK(31, 29)
+#define REG_FIELD_ERR_INFO_HIGH_BANK GENMASK(3, 0)
+#define REG_FIELD_ERR_INFO_HIGH_VALID BIT(31)
+
+#define DRAM_ADDRESS_CONTROL_MIN_COL_BITS 8
+#define DRAM_ADDRESS_CONTROL_MIN_ROW_BITS 11
+
+#define DMC520_SCRUB_TRIGGER_ERR_DETECT 2
+#define DMC520_SCRUB_TRIGGER_IDLE 3
+
+/* Driver settings */
+/*
+ * The max-length message would be: "rank:7 bank:15 row:262143 col:1023".
+ * Max length is 34. Using a 40-size buffer is enough.
+ */
+#define DMC520_MSG_BUF_SIZE 40
+#define EDAC_MOD_NAME "dmc520-edac"
+#define EDAC_CTL_NAME "dmc520"
+
+/* the data bus width for the attached memory chips. */
+enum dmc520_mem_width {
+ MEM_WIDTH_X32 = 2,
+ MEM_WIDTH_X64 = 3
+};
+
+/* memory type */
+enum dmc520_mem_type {
+ MEM_TYPE_DDR3 = 1,
+ MEM_TYPE_DDR4 = 2
+};
+
+/* memory device width */
+enum dmc520_dev_width {
+ DEV_WIDTH_X4 = 0,
+ DEV_WIDTH_X8 = 1,
+ DEV_WIDTH_X16 = 2
+};
+
+struct ecc_error_info {
+ u32 col;
+ u32 row;
+ u32 bank;
+ u32 rank;
+};
+
+/* The interrupt config */
+struct dmc520_irq_config {
+ char *name;
+ int mask;
+};
+
+/* The interrupt mappings */
+static struct dmc520_irq_config dmc520_irq_configs[] = {
+ {
+ .name = "ram_ecc_errc",
+ .mask = RAM_ECC_INT_CE_BIT
+ },
+ {
+ .name = "ram_ecc_errd",
+ .mask = RAM_ECC_INT_UE_BIT
+ },
+ {
+ .name = "dram_ecc_errc",
+ .mask = DRAM_ECC_INT_CE_BIT
+ },
+ {
+ .name = "dram_ecc_errd",
+ .mask = DRAM_ECC_INT_UE_BIT
+ },
+ {
+ .name = "failed_access",
+ .mask = FAILED_ACCESS_INT_BIT
+ },
+ {
+ .name = "failed_prog",
+ .mask = FAILED_PROG_INT_BIT
+ },
+ {
+ .name = "link_err",
+ .mask = LINK_ERR_INT_BIT
+ },
+ {
+ .name = "temperature_event",
+ .mask = TEMPERATURE_EVENT_INT_BIT
+ },
+ {
+ .name = "arch_fsm",
+ .mask = ARCH_FSM_INT_BIT
+ },
+ {
+ .name = "phy_request",
+ .mask = PHY_REQUEST_INT_BIT
+ }
+};
+
+#define NUMBER_OF_IRQS ARRAY_SIZE(dmc520_irq_configs)
+
+/*
+ * The EDAC driver private data.
+ * error_lock is to protect concurrent writes to the mci->error_desc through
+ * edac_mc_handle_error().
+ */
+struct dmc520_edac {
+ void __iomem *reg_base;
+ spinlock_t error_lock;
+ u32 mem_width_in_bytes;
+ int irqs[NUMBER_OF_IRQS];
+ int masks[NUMBER_OF_IRQS];
+};
+
+static int dmc520_mc_idx;
+
+static u32 dmc520_read_reg(struct dmc520_edac *pvt, u32 offset)
+{
+ return readl(pvt->reg_base + offset);
+}
+
+static void dmc520_write_reg(struct dmc520_edac *pvt, u32 val, u32 offset)
+{
+ writel(val, pvt->reg_base + offset);
+}
+
+static u32 dmc520_calc_dram_ecc_error(u32 value)
+{
+ u32 total = 0;
+
+ /* Each rank's error counter takes one byte. */
+ while (value > 0) {
+ total += (value & 0xFF);
+ value >>= 8;
+ }
+ return total;
+}
+
+static u32 dmc520_get_dram_ecc_error_count(struct dmc520_edac *pvt,
+ bool is_ce)
+{
+ u32 reg_offset_low, reg_offset_high;
+ u32 err_low, err_high;
+ u32 err_count;
+
+ reg_offset_low = is_ce ? REG_OFFSET_ECC_ERRC_COUNT_31_00 :
+ REG_OFFSET_ECC_ERRD_COUNT_31_00;
+ reg_offset_high = is_ce ? REG_OFFSET_ECC_ERRC_COUNT_63_32 :
+ REG_OFFSET_ECC_ERRD_COUNT_63_32;
+
+ err_low = dmc520_read_reg(pvt, reg_offset_low);
+ err_high = dmc520_read_reg(pvt, reg_offset_high);
+ /* Reset error counters */
+ dmc520_write_reg(pvt, 0, reg_offset_low);
+ dmc520_write_reg(pvt, 0, reg_offset_high);
+
+ err_count = dmc520_calc_dram_ecc_error(err_low) +
+ dmc520_calc_dram_ecc_error(err_high);
+
+ return err_count;
+}
+
+static void dmc520_get_dram_ecc_error_info(struct dmc520_edac *pvt,
+ bool is_ce,
+ struct ecc_error_info *info)
+{
+ u32 reg_offset_low, reg_offset_high;
+ u32 reg_val_low, reg_val_high;
+ bool valid;
+
+ reg_offset_low = is_ce ? REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_31_00 :
+ REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_31_00;
+ reg_offset_high = is_ce ? REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_63_32 :
+ REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_63_32;
+
+ reg_val_low = dmc520_read_reg(pvt, reg_offset_low);
+ reg_val_high = dmc520_read_reg(pvt, reg_offset_high);
+
+ valid = (FIELD_GET(REG_FIELD_ERR_INFO_LOW_VALID, reg_val_low) != 0) &&
+ (FIELD_GET(REG_FIELD_ERR_INFO_HIGH_VALID, reg_val_high) != 0);
+
+ if (valid) {
+ info->col = FIELD_GET(REG_FIELD_ERR_INFO_LOW_COL, reg_val_low);
+ info->row = FIELD_GET(REG_FIELD_ERR_INFO_LOW_ROW, reg_val_low);
+ info->rank = FIELD_GET(REG_FIELD_ERR_INFO_LOW_RANK, reg_val_low);
+ info->bank = FIELD_GET(REG_FIELD_ERR_INFO_HIGH_BANK, reg_val_high);
+ } else {
+ memset(info, 0, sizeof(*info));
+ }
+}
+
+static bool dmc520_is_ecc_enabled(void __iomem *reg_base)
+{
+ u32 reg_val = readl(reg_base + REG_OFFSET_FEATURE_CONFIG);
+
+ return FIELD_GET(REG_FIELD_DRAM_ECC_ENABLED, reg_val);
+}
+
+static enum scrub_type dmc520_get_scrub_type(struct dmc520_edac *pvt)
+{
+ enum scrub_type type = SCRUB_NONE;
+ u32 reg_val, scrub_cfg;
+
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_SCRUB_CONTROL0_NOW);
+ scrub_cfg = FIELD_GET(SCRUB_TRIGGER0_NEXT_MASK, reg_val);
+
+ if (scrub_cfg == DMC520_SCRUB_TRIGGER_ERR_DETECT ||
+ scrub_cfg == DMC520_SCRUB_TRIGGER_IDLE)
+ type = SCRUB_HW_PROG;
+
+ return type;
+}
+
+/* Get the memory data bus width, in number of bytes. */
+static u32 dmc520_get_memory_width(struct dmc520_edac *pvt)
+{
+ enum dmc520_mem_width mem_width_field;
+ u32 mem_width_in_bytes = 0;
+ u32 reg_val;
+
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_FORMAT_CONTROL);
+ mem_width_field = FIELD_GET(MEMORY_WIDTH_MASK, reg_val);
+
+ if (mem_width_field == MEM_WIDTH_X32)
+ mem_width_in_bytes = 4;
+ else if (mem_width_field == MEM_WIDTH_X64)
+ mem_width_in_bytes = 8;
+ return mem_width_in_bytes;
+}
+
+static enum mem_type dmc520_get_mtype(struct dmc520_edac *pvt)
+{
+ enum mem_type mt = MEM_UNKNOWN;
+ enum dmc520_mem_type type;
+ u32 reg_val;
+
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_MEMORY_TYPE_NOW);
+ type = FIELD_GET(REG_FIELD_MEMORY_TYPE, reg_val);
+
+ switch (type) {
+ case MEM_TYPE_DDR3:
+ mt = MEM_DDR3;
+ break;
+
+ case MEM_TYPE_DDR4:
+ mt = MEM_DDR4;
+ break;
+ }
+
+ return mt;
+}
+
+static enum dev_type dmc520_get_dtype(struct dmc520_edac *pvt)
+{
+ enum dmc520_dev_width device_width;
+ enum dev_type dt = DEV_UNKNOWN;
+ u32 reg_val;
+
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_MEMORY_TYPE_NOW);
+ device_width = FIELD_GET(REG_FIELD_DEVICE_WIDTH, reg_val);
+
+ switch (device_width) {
+ case DEV_WIDTH_X4:
+ dt = DEV_X4;
+ break;
+
+ case DEV_WIDTH_X8:
+ dt = DEV_X8;
+ break;
+
+ case DEV_WIDTH_X16:
+ dt = DEV_X16;
+ break;
+ }
+
+ return dt;
+}
+
+static u32 dmc520_get_rank_count(void __iomem *reg_base)
+{
+ u32 reg_val, rank_bits;
+
+ reg_val = readl(reg_base + REG_OFFSET_ADDRESS_CONTROL_NOW);
+ rank_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_RANK, reg_val);
+
+ return BIT(rank_bits);
+}
+
+static u64 dmc520_get_rank_size(struct dmc520_edac *pvt)
+{
+ u32 reg_val, col_bits, row_bits, bank_bits;
+
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_ADDRESS_CONTROL_NOW);
+
+ col_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_COL, reg_val) +
+ DRAM_ADDRESS_CONTROL_MIN_COL_BITS;
+ row_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_ROW, reg_val) +
+ DRAM_ADDRESS_CONTROL_MIN_ROW_BITS;
+ bank_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_BANK, reg_val);
+
+ return (u64)pvt->mem_width_in_bytes << (col_bits + row_bits + bank_bits);
+}
+
+static void dmc520_handle_dram_ecc_errors(struct mem_ctl_info *mci,
+ bool is_ce)
+{
+ struct dmc520_edac *pvt = mci->pvt_info;
+ char message[DMC520_MSG_BUF_SIZE];
+ struct ecc_error_info info;
+ u32 cnt;
+
+ dmc520_get_dram_ecc_error_info(pvt, is_ce, &info);
+
+ cnt = dmc520_get_dram_ecc_error_count(pvt, is_ce);
+ if (!cnt)
+ return;
+
+ snprintf(message, ARRAY_SIZE(message),
+ "rank:%d bank:%d row:%d col:%d",
+ info.rank, info.bank,
+ info.row, info.col);
+
+ spin_lock(&pvt->error_lock);
+ edac_mc_handle_error((is_ce ? HW_EVENT_ERR_CORRECTED :
+ HW_EVENT_ERR_UNCORRECTED),
+ mci, cnt, 0, 0, 0, info.rank, -1, -1,
+ message, "");
+ spin_unlock(&pvt->error_lock);
+}
+
+static irqreturn_t dmc520_edac_dram_ecc_isr(int irq, struct mem_ctl_info *mci,
+ bool is_ce)
+{
+ struct dmc520_edac *pvt = mci->pvt_info;
+ u32 i_mask;
+
+ i_mask = is_ce ? DRAM_ECC_INT_CE_BIT : DRAM_ECC_INT_UE_BIT;
+
+ dmc520_handle_dram_ecc_errors(mci, is_ce);
+
+ dmc520_write_reg(pvt, i_mask, REG_OFFSET_INTERRUPT_CLR);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dmc520_edac_dram_all_isr(int irq, struct mem_ctl_info *mci,
+ u32 irq_mask)
+{
+ struct dmc520_edac *pvt = mci->pvt_info;
+ irqreturn_t irq_ret = IRQ_NONE;
+ u32 status;
+
+ status = dmc520_read_reg(pvt, REG_OFFSET_INTERRUPT_STATUS);
+
+ if ((irq_mask & DRAM_ECC_INT_CE_BIT) &&
+ (status & DRAM_ECC_INT_CE_BIT))
+ irq_ret = dmc520_edac_dram_ecc_isr(irq, mci, true);
+
+ if ((irq_mask & DRAM_ECC_INT_UE_BIT) &&
+ (status & DRAM_ECC_INT_UE_BIT))
+ irq_ret = dmc520_edac_dram_ecc_isr(irq, mci, false);
+
+ return irq_ret;
+}
+
+static irqreturn_t dmc520_isr(int irq, void *data)
+{
+ struct mem_ctl_info *mci = data;
+ struct dmc520_edac *pvt = mci->pvt_info;
+ u32 mask = 0;
+ int idx;
+
+ for (idx = 0; idx < NUMBER_OF_IRQS; idx++) {
+ if (pvt->irqs[idx] == irq) {
+ mask = pvt->masks[idx];
+ break;
+ }
+ }
+ return dmc520_edac_dram_all_isr(irq, mci, mask);
+}
+
+static void dmc520_init_csrow(struct mem_ctl_info *mci)
+{
+ struct dmc520_edac *pvt = mci->pvt_info;
+ struct csrow_info *csi;
+ struct dimm_info *dimm;
+ u32 pages_per_rank;
+ enum dev_type dt;
+ enum mem_type mt;
+ int row, ch;
+ u64 rs;
+
+ dt = dmc520_get_dtype(pvt);
+ mt = dmc520_get_mtype(pvt);
+ rs = dmc520_get_rank_size(pvt);
+ pages_per_rank = rs >> PAGE_SHIFT;
+
+ for (row = 0; row < mci->nr_csrows; row++) {
+ csi = mci->csrows[row];
+
+ for (ch = 0; ch < csi->nr_channels; ch++) {
+ dimm = csi->channels[ch]->dimm;
+ dimm->grain = pvt->mem_width_in_bytes;
+ dimm->dtype = dt;
+ dimm->mtype = mt;
+ dimm->edac_mode = EDAC_FLAG_SECDED;
+ dimm->nr_pages = pages_per_rank / csi->nr_channels;
+ }
+ }
+}
+
+static int dmc520_edac_probe(struct platform_device *pdev)
+{
+ bool registered[NUMBER_OF_IRQS] = { false };
+ int irqs[NUMBER_OF_IRQS] = { -ENXIO };
+ int masks[NUMBER_OF_IRQS] = { 0 };
+ struct edac_mc_layer layers[1];
+ struct dmc520_edac *pvt = NULL;
+ struct mem_ctl_info *mci;
+ void __iomem *reg_base;
+ u32 irq_mask_all = 0;
+ struct resource *res;
+ struct device *dev;
+ int ret, idx, irq;
+ u32 reg_val;
+
+ /* Parse the device node */
+ dev = &pdev->dev;
+
+ for (idx = 0; idx < NUMBER_OF_IRQS; idx++) {
+ irq = platform_get_irq_byname(pdev, dmc520_irq_configs[idx].name);
+ irqs[idx] = irq;
+ masks[idx] = dmc520_irq_configs[idx].mask;
+ if (irq >= 0) {
+ irq_mask_all |= dmc520_irq_configs[idx].mask;
+ edac_dbg(0, "Discovered %s, irq: %d.\n", dmc520_irq_configs[idx].name, irq);
+ }
+ }
+
+ if (!irq_mask_all) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "At least one valid interrupt line is expected.\n");
+ return -EINVAL;
+ }
+
+ /* Initialize dmc520 edac */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reg_base))
+ return PTR_ERR(reg_base);
+
+ if (!dmc520_is_ecc_enabled(reg_base))
+ return -ENXIO;
+
+ layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+ layers[0].size = dmc520_get_rank_count(reg_base);
+ layers[0].is_virt_csrow = true;
+
+ mci = edac_mc_alloc(dmc520_mc_idx++, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+ if (!mci) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "Failed to allocate memory for mc instance\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ pvt = mci->pvt_info;
+
+ pvt->reg_base = reg_base;
+ spin_lock_init(&pvt->error_lock);
+ memcpy(pvt->irqs, irqs, sizeof(irqs));
+ memcpy(pvt->masks, masks, sizeof(masks));
+
+ platform_set_drvdata(pdev, mci);
+
+ mci->pdev = dev;
+ mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR4;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+ mci->scrub_mode = dmc520_get_scrub_type(pvt);
+ mci->ctl_name = EDAC_CTL_NAME;
+ mci->dev_name = dev_name(mci->pdev);
+ mci->mod_name = EDAC_MOD_NAME;
+
+ edac_op_state = EDAC_OPSTATE_INT;
+
+ pvt->mem_width_in_bytes = dmc520_get_memory_width(pvt);
+
+ dmc520_init_csrow(mci);
+
+ /* Clear interrupts, not affecting other unrelated interrupts */
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_INTERRUPT_CONTROL);
+ dmc520_write_reg(pvt, reg_val & (~irq_mask_all),
+ REG_OFFSET_INTERRUPT_CONTROL);
+ dmc520_write_reg(pvt, irq_mask_all, REG_OFFSET_INTERRUPT_CLR);
+
+ for (idx = 0; idx < NUMBER_OF_IRQS; idx++) {
+ irq = irqs[idx];
+ if (irq >= 0) {
+ ret = devm_request_irq(&pdev->dev, irq,
+ dmc520_isr, IRQF_SHARED,
+ dev_name(&pdev->dev), mci);
+ if (ret < 0) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to request irq %d\n", irq);
+ goto err;
+ }
+ registered[idx] = true;
+ }
+ }
+
+ /* Reset DRAM CE/UE counters */
+ if (irq_mask_all & DRAM_ECC_INT_CE_BIT)
+ dmc520_get_dram_ecc_error_count(pvt, true);
+
+ if (irq_mask_all & DRAM_ECC_INT_UE_BIT)
+ dmc520_get_dram_ecc_error_count(pvt, false);
+
+ ret = edac_mc_add_mc(mci);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "Failed to register with EDAC core\n");
+ goto err;
+ }
+
+ /* Enable interrupts, not affecting other unrelated interrupts */
+ dmc520_write_reg(pvt, reg_val | irq_mask_all,
+ REG_OFFSET_INTERRUPT_CONTROL);
+
+ return 0;
+
+err:
+ for (idx = 0; idx < NUMBER_OF_IRQS; idx++) {
+ if (registered[idx])
+ devm_free_irq(&pdev->dev, pvt->irqs[idx], mci);
+ }
+ if (mci)
+ edac_mc_free(mci);
+
+ return ret;
+}
+
+static int dmc520_edac_remove(struct platform_device *pdev)
+{
+ u32 reg_val, idx, irq_mask_all = 0;
+ struct mem_ctl_info *mci;
+ struct dmc520_edac *pvt;
+
+ mci = platform_get_drvdata(pdev);
+ pvt = mci->pvt_info;
+
+ /* Disable interrupts */
+ reg_val = dmc520_read_reg(pvt, REG_OFFSET_INTERRUPT_CONTROL);
+ dmc520_write_reg(pvt, reg_val & (~irq_mask_all),
+ REG_OFFSET_INTERRUPT_CONTROL);
+
+ /* free irq's */
+ for (idx = 0; idx < NUMBER_OF_IRQS; idx++) {
+ if (pvt->irqs[idx] >= 0) {
+ irq_mask_all |= pvt->masks[idx];
+ devm_free_irq(&pdev->dev, pvt->irqs[idx], mci);
+ }
+ }
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static const struct of_device_id dmc520_edac_driver_id[] = {
+ { .compatible = "arm,dmc-520", },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, dmc520_edac_driver_id);
+
+static struct platform_driver dmc520_edac_driver = {
+ .driver = {
+ .name = "dmc520",
+ .of_match_table = dmc520_edac_driver_id,
+ },
+
+ .probe = dmc520_edac_probe,
+ .remove = dmc520_edac_remove
+};
+
+module_platform_driver(dmc520_edac_driver);
+
+MODULE_AUTHOR("Rui Zhao <ruizhao@microsoft.com>");
+MODULE_AUTHOR("Lei Wang <lewan@microsoft.com>");
+MODULE_AUTHOR("Shiping Ji <shji@microsoft.com>");
+MODULE_DESCRIPTION("DMC-520 ECC driver");
+MODULE_LICENSE("GPL v2");
