commit 10a07379247078448c076690657a076076bf89aa
author Krishna Gudipati <kgudipat@brocade.com> Fri Jun 24 20:23:38 2011 -0700
committer James Bottomley <JBottomley@Parallels.com> Wed Jun 29 16:59:59 2011 -0500
tree 9d1a18ccf937203a0e9f0bb24ed601391c80b1e8
parent a714134a857d3984250ee52fda7850b61bf8a94e

[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.

- If flash controller is halted unconditionally, this results in
  illegal write access to flash controller register domain. Since
  flash controller registers are only accessible once s_clk is started
  - added logic to check for WGN status and halt flash controller only
  if it is already running.
- Added check to wait for flash controller halt to be completed before
  proceeding with s_clk/l_clk initializations.
- Removed unnecessary reset logic for PMM 1T memory and moved memory
  initialization after flash access enable.
- Disable Brocade-1860 asic MBOX interrupt before PLL initialization.
- Remove reset enable for S_CLK/L_CLK after both PLL initializations
  are complete.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/bfa/bfa_core.c

diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 4befbf9..f949844 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -251,7 +251,39 @@
 void
 bfa_msix_all(struct bfa_s *bfa, int vec)
 {
-	bfa_intx(bfa);
+	u32	intr, qintr;
+	int	queue;
+
+	intr = readl(bfa->iocfc.bfa_regs.intr_status);
+	if (!intr)
+		return;
+
+	/*
+	 * RME completion queue interrupt
+	 */
+	qintr = intr & __HFN_INT_RME_MASK;
+	if (qintr && bfa->queue_process) {
+		for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++)
+			bfa_isr_rspq(bfa, queue);
+	}
+
+	intr &= ~qintr;
+	if (!intr)
+		return;
+
+	/*
+	 * CPE completion queue interrupt
+	 */
+	qintr = intr & __HFN_INT_CPE_MASK;
+	if (qintr && bfa->queue_process) {
+		for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++)
+			bfa_isr_reqq(bfa, queue);
+	}
+	intr &= ~qintr;
+	if (!intr)
+		return;
+
+	bfa_msix_lpu_err(bfa, intr);
 }
 
 bfa_boolean_t
@@ -469,6 +501,9 @@
 	/*
 	 * initialize IOC configuration info
 	 */
+	cfg_info->single_msix_vec = 0;
+	if (bfa->msix.nvecs == 1)
+		cfg_info->single_msix_vec = 1;
 	cfg_info->endian_sig = BFI_IOC_ENDIAN_SIG;
 	cfg_info->num_cqs = cfg->fwcfg.num_cqs;
 	cfg_info->num_ioim_reqs = cpu_to_be16(cfg->fwcfg.num_ioim_reqs);
@@ -1080,12 +1115,6 @@
 	ioc->trcmod = bfa->trcmod;
 	bfa_ioc_attach(&bfa->ioc, bfa, &bfa_iocfc_cbfn, &bfa->timer_mod);
 
-	/*
-	 * Set FC mode for BFA_PCI_DEVICE_ID_CT_FC.
-	 */
-	if (pcidev->device_id == BFA_PCI_DEVICE_ID_CT_FC)
-		bfa_ioc_set_fcmode(&bfa->ioc);
-
 	bfa_ioc_pci_init(&bfa->ioc, pcidev, BFI_PCIFN_CLASS_FC);
 	bfa_ioc_mbox_register(&bfa->ioc, bfa_mbox_isrs);